User Manual Twilight Switch Züblin PC 24 L N L1 switch earth
Contents
1. User Manual Twilight Switch Zublin PC 24 The twilight switch PC24 is an automatic on off switch for incandescent halogen and fluorescent lights IMPORTANT NOTE Lights with high inrush currents should be connected through an additional contactor Ensure that the twilight switch s photo cell is not influenced in any way by the connected light The twilight switch must be placed behind the connected light as shown in the below picture correct incorrect Please follow the below instructions for mounting and connecting the device AEn 2 N BIE L1 L WI i yg Oe Ra LERE f n Ji hes SUPPLY i ii GROUND 220 240V LOAD Lux setting Shade the room or await desired dusk level at which the light should go on Turn the Lux selector in a clockwise direction towards maximum brightness until the LED lights up The light will be turned on approx 60 seconds after the LED switched on 9 Timer setting The timer setting is used to determine for how long the light should be switched on after dusk 1 to 8 hours Turn the selector in a clockwise direction to set the time Should the time selector be set to D D Dusk to Dawn the light will switch off only at dawn Note not to select an intermediate position Should bright outside light be detected throughout 5 minutes the timer will switch off automatically D D S 8H Parallel bypass The below diagram shows how to connect a switch to turn the connected light on or o2. ff The twilight switch is bypassed in parallel L1 switch earth load 230V 50Hz Technical data Nominal voltage 220 240V 50Hz Switching power 1000W 5A Twilight switching range approx 5 to 1000 Lux Timer switching range 1 to 8 hours or dusk til dawn Delay approx 60 s Temperature range 30 to 50 C IP rating IP55 CE Dimensions 105 x 79 x 36 mm
Download Pdf Manuals
Related Search