Advantech POC-S176 User Manual Ed1
Contents
1. Intel Installation Framework Step 2 3 Read the License Agreement and click Yes to proceed Intel Graphics Media Accelerator Driver Intel Graphics Media Accelerator Driver License Agreement You must accept all of the terms of the license agreement in order to continue the setup program Do you accept the terms INTEL SOFTWARE LICENSE AGREEMENT OEM IHY ISV Distribution amp Single User IMPORTANT READ BEFORE COPYING INSTALLING OR USING Do not use or load this software and any associated materials collectively the Software until you have carefully read the Following terms and conditions By loading or using the Software you agree to the terms of this Agreement If you do not wish to so agree do not install or use the Software Please Also Note If you are an Original Equipment Manufacturer OEM Independent Hardware Vendor IHV or Independent Software Vendor ISV this complete LICENSE AGREEMENT applies a 3l Intel amp Installation Framework POC S176 User Manual 18 Step 2 4 Read the file information screen and click Next to proceed Intel Graphics Media Accelerator Driver Intel Graphics Media Accelerator Driver Readme File Information Refer to the Readme file below to view the system requirements and installation information ec o o A o CN C S NU UC CN C S NU CC KATA UC NON CN THATS CN UN S NS S S S TATE Production Version Releases Microsoft Win2. Important The following windows illustrations are examples only You must follow B Note Al Note Al Note Al Note B the flow chart instructions and pay attention to the instructions which appear on your screen The CD ROM drive is designated as D throughout this chapter lt Enter gt means pressing the Enter key on the keyboard Before you install the graphic driver of POC S176 please ensure you have installed the Intel Chipset Software Installation Utility You can find this driver in the Utility CD ROM The resolution of window display will be fixed at 640 x 480 before you install the Graphics driver Depending on your monitor s native resolu tion the black area might be different 15 POC S176 User Manual 3 2 1 Installation for Windows XP Step 1 1 Double Click setup exe in D Driver CHIPSET XP folder The Install dia log will appear Step 1 2 Click Next to continue Intel R Chipset Software Installation Utility 7 2 2 1006 Welcome to the Intel R Chipset Software Installation Utility This program will install the Plug and Play components for the Intel R chipset that is on this system It is strongly recommended that you exit all Windows programs before continuing lt Back Cancel ntellR Installation Frameworks Step 1 3 Read the License Agreement and click Yes to proceed Intel R Chipset Software Installation Utility 7 2 2 1006 License Agre
3. Medical electrical equipment Part 1 2 General requirements for safety Collateral standard Electromagnetic compatibility Requirements and tests EN salle QA Medical Equipment With Respect to Electric Shock Fire and Mechanical Hazards Only C US In Accordance with UL 60601 1 CANICSA C22 2 No 601 1 and XXXX IEC 60601 1 Accessory equipment connected to the analog and digital interfaces must be in com pliance with the respective nationally harmonized IEC standards i e IEC 60950 for data processing equipment IEC 60065 for video equipment IEC 61010 1 for labora tory equipment and IEC 60601 1 for medical equipment Furthermore all configura tion should comply with the system standard IEC 60601 1 1 Anyone who connects additional equipment to the signal input or signal output is configuring a medical sys tem and is therefore responsible that the system complies with the requirements set forth in standard IEC 60601 1 1 The unit is for exclusive interconnection with IEC 60601 1 certified equipment in the patient environment and IEC 60XXX certified equipment outside of the patient environment If in doubt consult the technical ser vices department or your local representative V POC S176 User Manual FCC Class B This equipment has been tested and found to comply with the limits for a Class B dig ital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interf
4. Switch on the power switch on the back I O POTITI E esses aessa bea 099000 4 tot 4600 9 OOO Figure 2 3 Connecting the power cord 9 POC S176 User Manual 2 3 2 4 Running the BIOS Setup Program Your POC S176 has more than likely been properly set up and configured by your dealer prior to delivery You may still find it necessary to use the BIOS Basic Input Output System setup program to change system configuration information such as the current date and time or your type of hard drive The setup program is stored in read only memory It can be accessed either when you turn on or reset the panel PC by pressing the Crtl Alt Del key on your keyboard immediately after powering on the computer The settings you specify with the setup program are recorded in a special area of memory called CMOS RAM This memory is backed up by a battery so that it will not be erased when you turn off or reset the system Whenever you turn on the power the system reads the settings stored in CMOS RAM and compares them to the equipment check conducted during the power on self test POST If an error occurs an error message will be displayed on screen and you will be prompted to run the setup program Installing System Software Recent releases of operating systems from major vendors include setup programs which load automatically and guide you through hard disk preparation and operating system in
5. POC S176 Point of Care Terminal Trusted ePlatform Services AD ANTECH Instructions for the User The document combines text and illustrations providing a comprehensive overview of the system The information is presented as sequential steps of action allowing the user to learn directly how to use the device The text provides explanations and instructs the user step by step in the practical use of the product with short clear instructions in easy to follow sequence Definitions Warning A WARNING statement provides important information about a poten tially hazardous situation which if not avoided could result in death or A serious injury Caution A CAUTION statement provides important information about a poten tially hazardous situation which if not avoided may result in minor or A moderate injury to the user or patient or in damage to the equipment or other property Note A NOTE provides additional information intended to avoid inconve A niences during operation Part No 2008017600 01 Edition 1 Printed in Taiwan February 2009 POC S176 User Manual ii Safety Instructions x Strictly follow these Instructions for Use please read these safety instructions care fully Remind to keep this User s Manual for later reference and any use of the product requires full understanding and strict observation of all portions of these instructions Observe all WARNINGS and CAUTIONS as rendered throughout this m
6. to continue Please do 4 point calibration to calibrate the touch screen The Touchkit driver has been installed before operating touch Function please do 4 point calibration Would you do 4 point calibration now 10 Touch X once at each of the 4 corners on the panel Please touch each X icon at the corners until the icon stops blinking Please touch each X until it stops blinking X 6 3 Further Information For further information about the installation on your POC S176 including driver updates troubleshooting guides and FAQ lists please visit the following web resources Advantech websites www advantech com www advantech com tw POC S176 User Manual 34 Utilities and Hot Fixes Sections include E introduction Wake up by External USB Device at S3 Resume Wake up 7 1 Introduction The POC S176 system needs a specific utility or hot fix to support special functions 7 2 Wake up by External USB Device at S3 Resume Wake up POC S176 support three different sleep suspend modes they are 1 S1 Power On Suspend system will stop the clock turn off the LCD backlight but keep all power on The user can press any key mouse or keyboard to wake up the system 2 3 Suspend to RAM system will stop the clock turn off most power not includ ing memory power All necessary information will be saved in memory In this sleep mode the system needs a Hot fix to wake up by USB mouse or
7. Controller RS 232 interface uses COM3 Power Consumption 5V 200 Ma Software Driver Supports Windows 2000 Windows XP Durability touches in a lifetime 30 million Note The Point of Care Terminal with the optionally installed touchscreen will TT share COM3 Once the touchscreen is installed COM3 cannot be used 5 for other purposes Cleaning Disinfecting During normal use of the POC S176 may become soiled and should therefore be cleaned regularly Agents Green tinctured soap and Enzymatic detergents Steps 1 Wipe the POC S176 with a clean cloth that has been moistened in the cleaning solution 2 Prepare agent per manufacturer s instructions or hospital protocol 3 Wipe thoroughly with a clean cloth Caution Do not immerse or rinse the POC S176 and its peripherals If you acci dentally spill liquid on the device disconnect the unit from the power A source Contact your Biomed unit regarding the continued safety of the unit before placing it back in operation Do not spray cleaning agent on the chassis Do not use disinfectants that contain phenol Do not autoclave or clean the POC S176 or its peripherals with strong aromatic chlorinated ketone ether or Esther solvents sharp tools or abrasives Never immerse electrical connectors in water or other liquids 1 3 LCD Specifications Display type 17 TFT LCD Resolution 1280 x 1024 Colors 16 7 M 8 bit color Dot size mm 0 264 x 0 264 Viewing angle 140 1
8. calibration when the install completes TouchKit Setup Type he setup type that best suits your needs Do 4 point calibration em boot up e None 31 POC S176 User Manual 5 Click Next to continue Please select Support Multi Monitor System TouchKit Setup Type E he setup type that best suits your needs 10 Uenkit IF you want to use Mulit Monitor please check the box Td Support Mulit Monitor System 6 Click Next to continue If you want to change the driver destination folder you can click the Browse button to change the folder TouchKit Choose Destination Location Sele e setup will install files folder all to a different folder click lect another Destination Folder Program Files T ouchKit POC S176 User Manual 32 T Click Next to continue TouchKit Select Program Folder Miche Plea ct a program folder puen Kit You may type Advantech POC S196 AdvVolume V1 20 BumlnTest Games HD Tune Intel R Frequency Display I Chariot MadOnion com National Semiconductor Ralink Wireless Realtek 8 Click Yes to continue The install program will search the touchscreen controller and find it on COM3 TouchKit Setup Status gt g ouchKit s configuring your new software installation troller on COM Port Information 3 Touch Controller Found in COM Add this controller now 33 POC S176 User Manual 9 Click Yes
9. 211 97477300 Visit the Advantech websites at www advantech com or www advantech com tw if you need more information vii POC S176 User Manual POC S176 User Manual viii Contents Chapter Chapter Chapter Chapter Chapter Chapter 1 2 1 2 2 2 3 2 5 3 1 3 2 4 4 1 4 2 4 3 5 5 1 5 2 5 3 6 6 1 6 2 General Information 1 INOQUC ON seisne dus snesgedenenanqadanssquaedsersenadidecanigacedenseadenadass 2 sje tee 2 Table 1 1 Touchscreen Specification sesusuusss 4 ECD Specifications edet terat ceci ed bct a vente qx eq 4 BI 5 Figure 1 1 Dimensions of the POC S176 seee 5 System SUID visi suissmtbasndcoreska iat Fodraxedizxe f A Quick Tour of the POC S176 sss eem 8 Figure 2 1 Front view of the Point of care terminal 8 Figure 2 2 Rear view of the Point of Care Terminal 8 installati n Procedures bacc dcin rnb dee e vana eu eat c cdd 9 2 2 1 Connecting the Power Cord sssseeeeeen 9 2 2 2 Switching on the Power sssssssee 9 Figure 2 3 Connecting the power cord sssseeeees 9 Running the BIOS Setup Program sse 10 Installing System Software sss 10 installing the Drivers esasen inaani ee ei ets 11 Figure 2 4 File directory Drivers and Ut
10. 30 Luminance 300 cd m Contrast ratio 500 1 LCD MTBF 50 000 hours Backlight lifetime 50 000 hours POC S176 User Manual 4 1 4 Dimensions Z f e p u 7 i i k KI 5 0 0G oE a i 9 2 cL LIE s l j iw z I o i beme J za SEMEN o EE ee eaS E M Figure 1 1 Dimensions of the POC S176 A Audio Control Button B Power Light C Brightness Control Button 5 POC S176 User Manual EEG P 81 8 BA A 4 pin mini DIN DC connector B USB 2 0 ports x 2 C USB 2 0 ports x 2 D DVI port E 10 100 1000 Base T Ethernet interface RJ 45 F 10 100 1000 Base T Ethernet interface RJ 45 G Isolated RS 232 422 485 COM port By jumper setting POC S176 User Manual 6 System Setup Sections include E A Quick Tour of the POC S176 E installation Procedures B Running the BIOS Setup Pro gram E Installing System Software E Installing the Drivers 2 1 A Quick Tour of the POC S176 Before you start to set up the POC S176 take a moment to become familiar with the locations and purposes of the control
11. Graphics Engine and the Intel Graphics Media Accelerator 950 Intel GMA 950 providing enhanced graphics support over the previous generation Graphics and Memory Controller Hubs GMCH s Display Memory Dynamic Video Memory Technology DVMT 3 0 dynamically allocates up to 224 MB of system memory for graphics usage DVI Transmitter The POC S176 uses Chrontel CH7307C for driving its DVI Ports The CH7307C is a Display Controller device which accepts digital graphics input signal encodes and transmits data through a DVI link DFP can also be supported The device accepts one channel of RGB data over three pairs of serial data ports The DVI processor includes a low jitter PLL for generation of the high frequency seri alized clock and all circuitry required to encode serialize and transmit the data The CH7307C is able to drive a DVI display at a pixel rate of up to 165 MHz supporting UXGA 1600 x 1200 resolution displays Display Types POC S176 supports Single DVI I jack for single monitor The DVI I Jack support both DVI Digital I F and CRT RGB signal Analog CRT DAC interface supports max DAC frequency up to 400 MHz 24 bit RAMDAC DDC2B compliant and resolution up to QXGA 2048 x 1536 POC S176 User Manual 14 3 2 Installation of Chipset Driver Complete the following steps to install the Chipset driver Follow the procedures in the flow chart that apply to the operating system that you are using within your POC S176
12. PM GMS 940GML E 7230 E 8501 Date October 13 2005 OCHEEIENUACION EHE BEBENUICNC BEBE BE BEN NUNC BEBE BEBENUNCNC CE BEBE RRR ERR ig NOTE For the list of supported chipsets please refer to the Release Notes OXCHCOGIENICN I BEBE BENENUNCAC EBENE BEN NUN NEL BEBENENUNC BEBE BENE BN NEED BENENUNC EBENE BENE BEN CO CONTENTS OF THIS DOCUMENT HMMA A ARKH BEBE BENE KKK AA RRR This document contains the following sections v D SN Intel Fi Installation Frameworks Step 1 5 When the Setup COMPLETE message appears click Finish to restart your computer Intel R Chipset Software Installation Utility 7 2 2 1006 The Intel R Chipset Software Installation Utility is complete You must restart your computer for changes to take effect Would you like to restart your computer now Yes want to restart my computer now C No will restart my computer later Remove any disks from their drives and then click Finish Intel R Installation Frameworks 17 POC S176 User Manual Step 2 1 Double Click setup exe in D Drive GRAPHICS XP folder The Install dialog will appear Step 2 2 Click Next to continue Intel Graphics Media Accelerator Driver Welcome to the Setup Program This setup program will install the Intel Graphics Media Accelerator Driver onto this computer It is strongly recommended that you exit all programs before continuing Click Next to continue lt Back Cancel
13. ader 16 SATA Connector Channel 0 33 COM Port Pin 9 configuration 17 SATA Connector Channel 2 34 COM1 RS232 422 485 Selection Jumper Default RS232 35 Clear CMOS button POC S176 User Manual 44 Appendix B Windows Display Hot Key Function B 1 Windows Display Hot Key Function If user want to switch the display content to a different display device such as 1 Internal LCD Panel Notebook 2 External CRT Monitor Monitor 3 External DVI Monitor Digital Display The user can press the Hot keys below to switch the display device Hot Key Display Device Ctrl Alt F 1 External CRT Monitor Ctrl Alt F3 Internal LCD Panel Ctrl Alt F4 External DVI Monitor The display content will be switched to the dedicated display device indicated POC S176 User Manual 46 Appendix B Windows Display Hot Key Function POC S176 User Manual 47 Trusted ePlatform Services AD ANTECH www advantech com Please verify specifications before quoting This guide is intended for reference purposes only All product specifications are subject to change without notice No part of this publication may be reproduced in any form or by any means electronic photocopying recording or otherwise without prior written permis sion of the publisher All brand and product names are trademarks or registered trademarks of their respective companies Advantech Co Ltd 2009
14. all may cause damage For plug in equipment the power outlet socket must be located near the equipment and must be easily accessible Caution To prevent overheating it is recommended to install the unit in an upright position Do not lie it flaton a table and do not cover the open A ings or place the device in direct sunlight or near radiant heaters iii POC S176 User Manual Make sure the voltage of the power source is correct before connecting the equip ment to the power outlet Position the power cord so that people cannot step on it Do not place anything over the power cord If the equipment is not used for a long time disconnect it from the power source to avoid damage by transient over voltage Caution Do not leave this equipment in an uncontrolled environment where the storage temperature is below 20 C 4 F or above 60 C 140 F This A may damage the equipment If your computer clock is unable to keep accurate time or the BIOS configuration resets to default please check the battery Caution Do not replace the battery yourself Please contact a qualified technician or your retailer A The computer is provided with a battery powered real time clock circuit There is a danger of explosion if battery is incorrectly replaced Replace only with same or equivalent type recommended by the manufacturer Discard used batteries according to the manufacturer s instructions Improper installation of VESA mounting can re
15. anual and on labels on the equipment Repair of the device may also only be carried out by trained service personnel Advantech recommends that a service contract be obtained with Advantech Service and that all repairs also be carried out by them Otherwise the correct functioning of the device may be compromised Warning Because of the danger of electric shock never remove the cover of a N device while it is in operation or connected to a power outlet If one of the following situations arises have the equipment checked by service per sonnel a The power cord or plug is damaged b Liquid has penetrated the equipment c The equipment has been exposed to moisture d The equipment does not work well or you cannot get it to work according to the user s manual e The equipment has been dropped and damaged f The equipment has obvious signs of breakage Disconnect this equipment from any AC outlet before cleaning Use a damp cloth Do not use liquid or spray detergents for cleaning and keep this equipment away from humidity Caution To avoid short circuits and otherwise damaging the device do not allow fluids to come in contact with the device If fluids are accidentally spilled A on the equipment remove the affected unit from service as soon as pos sible and contact service personnel to verify that patient safety is not compromised Put this equipment on a reliable surface during installation Dropping it or letting it f
16. become dirty and should be regularly cleaned Steps 1 Prepare cleaning agent per manufacturer s instructions or hospital protocol 2 Wipe the POC with a clean cloth that has been moistened in the cleaning solu tion 3 Wipe thoroughly with a clean cloth Cleaning agent list chemical disinfectants which have been tested on the POC 2 o Cleaning Agents Cidex Isopropyl alcohol Green tinctured soap Windex Alcohol Alcohol 7096 Chloride 1000PPM Incidin plus jo jojo BR Ww MI gt Incidin liquid e Mikrozid liquid Caution A Do not immerse or rinse the POC or its peripherals If you acci dentally spill liquid on the device disconnect the unit from the power source Contact your Biomed Department regarding the continued safety of the unit before placing it back in operation Do not spray cleaning agent on the chassis Do not use disinfectants that contain phenol Do not autoclave or clean the POC or its peripherals with strong aromatic chlori nated ketone ether or Esther solvents sharp tools or abra sives Never immerse electrical connectors in water or other liquids 39 POC S176 User Manual 8 5 General Safety Guide For your own safety and that of your equipment always take the following precau tions Disconnect the power plug by pulling the plug not the cord if any of the following conditions exists You want to rem
17. dows XP s oco cb ocho cb ocho cock Driver Revision PV 14 31 Package 39636 v Intel Installation Framework Step 2 5 When the Click Next to continue message appears click Next to pro ceed Intel Graphics Media Accelerator Driver _ an Intel Graphics Media Accelerator Driver intel Setup Progress Please wait while the following setup operations are performed Copying File HDMIENU dll Creating Key HKLM System CurrentControlSet Control wWindows SystemDirectory C WINDC Creating Key HKLM System CurrentControlSet Servicestialm Device0 SystemDirectory C W Creating Key HKLM System CurrentControlSet Services ialm Device1 SystemDirectory C W Creating Key HKLM SOFTWARE Microsoft Windows CurrentV ersion Uninstall HDMI DisplayNa Creating Key HKLM SOFTWARE Microsoft windows Current ersion Uninstall HDMI UninstallS Installing Driver Mobile Intel R 945 Express Chipset Family Version 6 14 10 4864 Intel Installation Framework 19 POC S176 User Manual Step 2 6 When the Setup Is Complete message appears click Finish to restart POC S176 User Manual your computer Intel Graphics Media Accelerator Driver Intel Graphics Media Accelerator Driver intel Setup Is Complete You must restart this computer For the changes to take effect Would you like to restart the computer now Yes I want to restart this computer now No Iwill restart this computer lat
18. ely The various drivers and utilities in the CD ROM disc have their own text files which help users install the drivers and understand their functions These files are a very useful supplement to the information in this manual For your reference the directory of drivers on the Drivers and Utilities CD ROM is D DRIVER AUDIO CHIPSET ETHERNET GRAPHICS USB TOUCHSCREEN Document Figure 2 4 File directory Drivers and Utilities CD ROM Note The drivers and utilities used for the POC S176 panel PCs are subject EN to change without notice If in doubt check Advantech s website or con tact our application engineers for the latest information regarding drivers and utilities 11 POC S176 User Manual POC S176 User Manual 12 n P 4 S 8H b f le w B A Ln Uu vi Chipset and Graphics Setup Sections include E introduction E Installation of Chipset Driver 3 1 3 1 1 3 1 2 3 1 3 3 1 4 Introduction The POC S176 has an onboard display interface The specifications and features are described in the following section Chipset The POC S176 uses Mobile Intel 945GME Express chipset for its graphic control ler It supports SDVO device and CRT monitors The Mobile Intel 945GM Express Chipsets are designed for use with Intel s next generation mobile platform Intel Centrino Duo processor technology The Mobile Intel 945 Express Chipset Family come with the Generation 3 5 Intel Inte grated
19. ement Please read the following license agreement carefully Press the Page Down key to view the rest of the agreement INTEL SOFTWARE LICENSE AGREEMENT OEM IHV 7 ISV Distribution amp A Single User e IMPORTANT READ BEFORE COPYING INSTALLING OR USING Do not use or load this software and any associated materials collectively the Software until you have carefully read the following terms and conditions By loading or using the Software you agree to the terms of this Agreement If you do not wish to so agree do not install or use the Software Please Also Note f you are an Original Equipment Manufacturer OEM Independent Hardware Vendor IHV or Independent Software Vendor ISV this complete LICENSE AGREEMENT applies v You must accept all the terms of the license agreement in order to continue the setup program Do you accept the terms lt Back No Intel R Installation Frameworks POC S176 User Manual 16 Step 1 4 Read the file information screen and click Next to proceed Intel R Chipset Software Installation Utility 7 2 2 1006 Readme File Information Refer to the Readme file below to view system requirements and installation information Press the Page Down key to view the rest of the file HOHE KI RH RIN RH ER Product Intel R Chipset Software Installation Utility Release Production Version 7 2 2 1006 Target Chipset s 958X lt M 975X 945G P PL GM
20. er Click Finish then remove any installation media from the drives Finish Intel Installation Framework 20 Audio Interface Sections include E Introduction installation of Audio Driver B Further Information 4 1 4 2 Introduction The POC S176 s onboard audio interface provides high quality stereo sound by using the ALC888 audio controller from Realtek The ALC888 series are high perfor mance 7 1 2 channel High Definition Audio Codecs providing ten DAC channels that simultaneously support 7 1 sound playback plus 2 channels of independent stereo sound output multiple streaming through the front panel stereo outputs All analog jacks are input and output capable and headphone amplifiers are also integrated at each analog output All analog I Os can be re tasked according to user s definitions or automatically switched depending on the connected device type Installation of Audio Driver Before installing the audio driver please take note of the procedures detailed below You must know which operating system you are using in your POC S176 and then refer to the corresponding installation flow chart Just follow the steps in the flow chart You can quickly and successfully complete the installation even if you are not familiar with instructions for Windows This setup program will install the audio driver and Realtek utility into your system Important The following windows illustrations are examples o
21. er ence when the equipment is operated in a residential environment This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with this user s manual it may cause harmful interference to radio com munications Note that even when this equipment is installed and used in accordance with this user s manual there is still no guarantee that interference will not occur If this equip ment is believed to be causing harmful interference to radio or television reception this can be determined by turning the equipment on and off If interference is occur ring the user is encouraged to try to correct the interference by one or more of the following measures W Reorient or relocate the receiving antenna B Increase the separation between the equipment and the receiver B Connect the equipment to a power outlet on a circuit different from that to which the receiver is connected W Consult the dealer or an experienced radio TV technician for help Warning Any changes or modifications made to the equipment which are not expressly approved by the relevant standards authority could void your A authority to operate the equipment List of Accessories Before installing your Point of Care Terminal ensure that the following materials have been received W POC S176 series Point of Care Terminal W Accessories for POC S176 CD ROM disc Drivers User s manual and Utilities Mounting
22. esseessseseeeeenennennernn nennen 34 Utilities and Hot Fixes 35 ITTFOGUCUION aT TEE SNC 36 Wake up by External USB Device at S3 Resume Wake up 36 7 2 4 Installation for Windows XP seeeen m 36 Operation Information 37 Plug in the Power Adapter esee 38 Iur 38 Disconnect the power ssssssssssssesseeeneeneemee eme eene nnn 38 Point of Care Terminal Cleaning and Disinfecting 39 General Safety Guide cec tnt enit nnn nina 40 Description of Connectors 41 Description of Connectors ssssssssssssssssssseeeeennennnnn 42 Figure A 1 Top Side Global View of POC S176 Motherboard indi cates all connectors location sssusss 42 Figure A 2 Bottom Side Global View of POC S176 Motherboard indicates all connectors location 43 Windows Display Hot Key Function 45 Windows Display Hot Key Function 46 General Information Sections include E Introduction E Specifications m LCD Specifications E Dimensions 1 1 Introduction The POC S176 is an Intel Core Duo Intel Core 2 Duo Mobility processor based computer that is designed to serve as a Point of Care terminal POC It is a PC based system with 17 color TFT LCD display Single DVI I Port Dual on board 10 100 1000 PCI E Ethernet contro
23. ilities CD ROM 11 Chipset and Graphics Setup 13 IMMROGDUCUION s 14 MEME II PE 14 3 1 2 Display Memory iiid cie dicte ded ete rete ebd 14 3 1 3 DN I Tratsmltter tic ai aa aia ia 14 S14 Display Types 22st obierat aim eg fedet eve eie eua fecet 14 Installation of Chipset Driver sssssssssmR 15 3 2 1 Installation for Windows XP ssssssseeeeene 16 Audio Interface 21 INtrodUCtoOn sisii aie naaa iaa aa i a a aiaia 22 Installation of Audio Driver eeeeessssseseeennnennn nnn 22 4 2 1 Installation for Windows 2000 XP eese 23 Further InformatiOh iine hien haod nena aea tta enda et a d di nnn dae duque 24 PCI Express Ethernet Interface 25 LATFODUCUION RETE TIEMImRRMSEPS 26 Installation of the Ethernet Driver cccccccccceessseeceeceseeeseeeeeseaeeseeeeas 26 5 2 1 Installation for Windows XP eeeeeeemmm 26 F rther InformatiOn iiiter ode de ends cre da ate AEA 27 Touch Panel Interface 29 IMMFOGUCUION ERE TTE T 30 Installation of Touch Panel Driver eeeeeen 30 ix POC S176 User Manual 6 3 Chapter 7 7 1 7 2 Chapter 8 Appendix A A 1 Appendix B B 1 POC S176 User Manual 6 2 1 Installation for Windows XP eeen me 30 Further Information e
24. keyboard 3 S4 Suspend to Disk Hibernation system will stop the clock turn off most power include the memory power All necessary information will be saved to Hard Disk In this sleep mode the user needs to press the power button to wake up the system 7 2 4 Installation for Windows XP 1 Double click USBRG REG in the D Driver USB XP folder 2 Click Yes to install this registry information 3 Click OK to close the successful installation information window POC S176 User Manual 36 y e y d i rN a WES Operation Information Sections include E Plug in the Power Adapter E Thermal B Disconnect the Power E Point of Care Terminal Clean ing and Disinfecting E General Safety Guide 8 1 8 2 8 3 Plug in the Power Adapter Always leave space around your power adapter Do not use this equipment in a loca tion where airflow around the power adapter or computer is confined Always discon nect the power adapter before opening the computer to perform procedures such as installing memory or removing the hard disk Warning Use only the power adapter that came with your POC S176 system Adapters for other electronic devices may look similar but they may damage your computer Thermal When using your POC S176 system it is normal for the rear metal heatsink to get warm The rear metal heatsink of the POC S176 case functions as a cooling surface that transfers heat fro
25. kits and packet of screws External DC adapter Manufacturer SINPRO Model no MPU100 107 Warning No user serviceable parts inside refer servicing to qualified personnel Only the accessories indicated on the list of accessories above have been tested and approved to be used with the device Accordingly It is strongly recommended that only these accessories be used in con junction with the specific device Otherwise the correct functioning of the device may be compromised POC S176 User Manual vi Additional Information and Assistance Contact your distributor sales representative or Advantech s customer service cen ter for technical support if you need additional assistance Please have the following information ready before you call E Product name and serial number W Description of your peripheral attachments B Description of your software operating system version application software etc B Acomplete description of the problem The exact wording of any error messages WB This equipment is a source of electromagnetic waves Before use please make sure that there are not EMI sensitive devices in its surrounding which may other wise malfunction Manufacturer Advantech Co Ltd No 1 Alley 20 Lane 26 Reuiguang Road Neihu District Taipei Taiwan 114 R O C TEL 02 2792 7818 Distributed in Europe by Advantech Europe GmbH Kolberger Stra e 7 D 40599 D sseldorf Germany Tel 49 211 97477350 Fax 49
26. ller Single COM port Quad USB 2 0 port and a 24 bit stereo audio controller With a built in 2 5 HDD drive the POC S176 is as slim and user friendly as a notebook computer and generates low audible noise For sys tem integrators this silent compact mobile and highly integrated multimedia system lets you easily build a Point of Care Terminal into your applications The low audible noise of POC S176 makes it an ideal and safe Point of Care solution for patients and hospital practitioners The POC S176 is specially designed to resist spills and water damage and ensures dust resistance with its protected LCD sealed ports like a closed system The high contrast ratio 500 1 of POC S176 makes it a perfect image terminal for PACS and DICOM applications The POC S176 is a reliable solution to your application s pro cessing requirements 1 2 Specifications General Dimensions W x H x D 436 5 x 376 5 x 91 5 mm 17 18 x 14 82 x 3 60 Weight 8 kg 17 6 Ib B Power Supply DC model 100 watts max External DC Adapter Manufacturer SINPRO Inc Model no MPU100 107 used within POC S176XXXXXXXX Input voltage 100 240 VAC 47 63 Hz 1 25 0 5 A Output voltage 18 VDC 5 55 A max Disk drive housing Space for one 2 5 SATA HDD Entire system IPX1 water resistant rating Hardware CPU Intel Core Duo Core 2 Duo processor low voltage 1 66 1 5 GHz uFC BGA479 BIOS Award 512 KB Flash BIOS supports P
27. lug amp Play APM Chipset 945 GME GMCH ICH7M Front side bus FSB 533 667 MHz RAM 200 pin DDR2 SODIMM slots x 2 supports unbuffered 533 667 MHz DDR2 SDRAM Non ECC maximum capacity to 4 GB For the memory mapped I O MMIO space reserved the 32 bit operating systems limit the total available memory to 3 12 GB to avoid potential driver compatibility issues IDE interface ATA 100 x 1 Supports one IDE device B SATA interface SATA x 2 Supports one SATA device B Serial ports RS 232 port x 1 all compatible with 16C550 UARTs COM1 has optical isolation COM1 supports 5V by jumper selection B Universal serial bus USB port USB 2 0 port x 6 4 external 2 internal W Expansion slot Mini PCI 33MHz slot x 1 Mini PCI E 2 5Gb s slot x 1 BW Watchdog timer supports Super I O embedding watchdog function Automati cally generates system reset when the system stops due to a program error CMOS battery BIOS 3 0 V 195 mA lithium battery POC S176 User Manual 2 Display interface B SDVO interface Chrontel 7307C Single channel DVI transmitter to support External Single display B Display resolution Supports 24 bit digital output DVI I port resolutions up to 1600 x 1200 at 60 Hz B Graphic chipset Intel Graphics Media Accelerator 950 engine Shared memory Dynamic Video Memory Technology DVMT 3 0 to dynami cally allocate up to 224 MB of system memory for graphics usage B Display type Simultaneously supp
28. m inside the computer to the cooler air outside Do not block this heatsink by any soft material Warning Do not place your POC S176 system on a pillow or other soft material when it is on as the material may block the airflow and cause the com A puter to overheat Never place anything on the system case before turn ing off the computer Never turn on your computer unless all of its internal and external parts are in place Operating the computer when it is open or missing parts can be dangerous and can damage your computer Disconnect the power The only way to disconnect power completely is to unplug the power cord Make sure at least one end of the power cord is within easy reach so that you can unplug the computer when you need to Warning Your AC cord came equipped with a three wire grounding plug a plug that has a third grounding pin This plug will fit only a grounded AC out A let If you are unable to insert the plug into an outlet because the outlet is not grounded contact a licensed electrician to replace the outlet with a properly grounded outlet Do not defeat the purpose of the grounding plug Warning Never push objects of any kind into this product through the openings in the case Doing so may be dangerous and result in fire or a dangerous A electric shock POC S176 User Manual 38 8 4 Point of Care Terminal Cleaning and Disinfecting During normal use of the POC Point of Care Terminal the device may
29. nly You must follow as the flow chart instructions and pay attention to the instructions which appear on your screen Note The CD ROM drive is designated as D throughout this chapter Note lt Enter gt means pressing the Enter key on the keyboard POC S176 User Manual 22 4 2 4 Installation for Windows 2000 XP 1 Double Click setup exe in D Driver AUDIO XP folder The Install dialog will appear 2 Click Next to continue The install program will install the driver and utility It will spend a period of time processing Realtek High Definition Audio Driver Setup 2 51 R1 82 Welcome to the InstallShield Wizard for Realtek High Definition Audio Driver rd will install Realtek High Definition Audio Driver c computer To 3 When the InstallShield Wizard Complete message appears click Finish to restart your computer Realtek High Definition Audio Driver Setup 2 51 R1 82 Maintenance Complete has finished performing maintenance operations on Realtek High Definition IQ es want to restart my computer now Wf No will restart my computer later Remove any disks from their drives and then click Finish to complete setup Finish Cancel 23 POC S176 User Manual 4 3 Further Information For further information about the audio interface installation on your POC S176 including driver updates troubleshooting guides and FAQ lists please visit the follow ing web resou
30. orts CRT Audio function B Chipset Realtek ALC888 compliant with Intel HDA B Audio controller 24 bit codec full duplex stereo codec B Audio interface Microphone in Line out Ethernet interface B Chipset RTL8111B PCI express high performance Gigabit Ethernet controller W Ethernet interface Gigabit Ethernet port x 2 fully integrated Gigabit Ethernet Media Access Control MAC and Physical Layer PHY functions and each provides a standard IEEE 803 3 Ethernet interface for 10 100 1000 Mbps appli cation Optional modules Memory 512 MB 1GB 2GB DDR2 533 667 MHz SODIMM B HDD 2 5 SATA HDD Mini PCI WLAN module 802 11 a b g WLAN Mini PCI E WLAN module 802 11 b g n WLAN Environment B Temperature 0 40 C Relative humidity 10 C to 40 C 20 RH to 90 RH operating 20 C to 50 C 10 RH to 95 RH Storage Non condensing B Shock 20 G half sine 11 msec duration WB Vibration 0 047 double amplitude displacement 5 32 Hz 2G Peak 32 500 Hz B Power MTBF 100 000 hrs B Altitude Operational 6 000 feet Shipping 40 000 feet B Certifications EMC CE FCC approved Safety UL60601 1 and EN60601 1 approved This device bears the CE label in accordance with the provisions of the EMC Direc tive 89 336 EMC and the Low Voltage Directive 73 23 EEC 3 POC S176 User Manual Touchscreen optional Type Analog Resistive Resolution Continuous Light Transmission 7596
31. ove any parts The power cord or plug becomes frayed or otherwise damaged You spill something into the case Your computer has been dropped or the case has been otherwise damaged You suspect that your computer needs service or repair You want to clean the case POC S176 User Manual 40 Appendix A Description of Connectors A 1 Description of Connectors 5 6 7 8 9 10 1l Figure A 1 Top Side Global View of POC S176 Motherboard indicates all connectors location POC S176 User Manual 42 Figure A 2 Bottom Side Global View of POC S176 Motherboard indicates all connectors location 43 POC S176 User Manual No Description No Description 1 CPU FAN Reserved 18 SATA Power Connector 2 2 DDR 2 S O DIMM Socket Con 19 System FAN Reserved nector 2 3 Touch Enable Volume Up Down 20 Mini PCI E Socket Switch Connector 4 Inverter Connecter 21 Mini PCI Socket 5 COM1 Jack 22 BIOS Socket 6 RJ 45 Jack LAN 0 23 Touchscreen I F Connector 7 RJ 45 Jack LAN 1 24 Internal Audio Connector Line HP Out amp Line MIC In amp Speaker Out 8 DVI Connector 25 Battery Connector 9 USB connector 26 Reset Switch 10 USB connector 27 RTC Battery Socket 11 DC in Power Connector 28 LVDS power selection 12 Power Button LED Connector 29 LVDS connectors 13 PATA Connector 30 USB Header 14 USB Card Reader 31 COM4 Header 15 SATA Power Connector 0 32 GPIO He
32. r Information For further information about the installation on your POC S176 including driver updates troubleshooting guides and FAQ lists please visit the following web resources Realtek website www realtek com tw Advantech websites www advantech com www advantech com tw 27 POC S176 User Manual POC S176 User Manual 28 Touch Panel Interface Sections include E introduction E Installation of Touch Panel Driver B Further Information 6 1 Introduction The POC S176 is supported with a system integrated touch panel The touch panel controller is control by the system CONG interface 6 2 Installation of Touch Panel Driver 6 2 1 Installation for Windows XP 1 Double Click setup exe in D Driver TOUCHSCREEN XP and VISTA folder The Install dialog will appear 2 Click Next to continue Welcome to the InstallShield The InstallShield Wizard will install TouchKit on your computer To continue click Nex POC S176 User Manual 30 3 Click Next to continue Because POC S176 s touch controller is controlled by COM3 please do not select the Install PS 2 interface driver TouchKit Setup Type Select the setup type that best suits your needs Teuehkit nterface driver ontroller heck the check b 5 2 touch controller Wil Install PS 2 interface driver 4 Click Next to continue Please select None for Do 4 point calibration the driver install program will do this 4 point
33. rces Realtek website www realtek com tw Advantech websites www advantech com www advantech com tw POC S176 User Manual 24 PCI Express Ethernet Interface Sections include E Introduction E installation of Ethernet Driver E Further Information 5 1 Introduction The POC S176 is equipped with the high performance PCle Ethernet chipset Realtek RTL8111B which is fully compliant with IEEE 802 3 10 100 1000 Mbps standards The Ethernet port provides a standard RJ 45 jack 5 2 Installation of the Ethernet Driver 5 2 1 Installation for Windows XP 1 Double Click Setup exe in the D Driver ETHERNET XP folder The Install dia log will appear 2 Click Next to continue POC S176 User Manual 26 3 4 5 3 Click Install to continue The install program will install the driver It will spend a period of time process ing REALTEK GbE amp FE Ethernet PCI E NIC Driver InstallShield Wizard Click Install to begin the installation If you want to review or change any of your installation settings click Back Click Cancel to exit the wizard When the InstallShield Wizard Complete message appears click Finish to fin ish the install program REALTEK GbE amp FE Ethernet PCI E NIC Driver InstallShield Wizard InstallShield Wizard Complete The InstallShield Wizard has successfully installed REALTEK GbE amp FE Ethernet PCI E NIC Driver Click Finish to exit the wizard Furthe
34. s drives connections and ports which are illus trated in the figures below When you place the POC S176 upright on the desktop its front panel appears as shown in Figure 2 1 Figure 2 1 Front view of the Point of care terminal When you turn the Point of Care Terminal around and look at its rear cover the sunken I O section is at the bottom of the panel PC as shown in Figure 2 2 The I O section includes various I O ports including serial ports DVI port the Ethernet port USB ports the DC power adapter jack and so on Figure 2 2 Rear view of the Point of Care Terminal POC S176 User Manual 8 2 2 Installation Procedures 2 2 1 Connecting the Power Cord The POC S176 could only be powered by a DC power adapter SINPRO Model No MPU 100 107 Be sure to always handle the power cords by holding the plug ends only Follow these procedures in order 1 Connect the female end of the power adapter to the DC jack of the panel PC See Figure 2 3 2 Connect the female end of the power cord to the DC power adapter 3 Connect the 3 pin male plug of the power cord to an electrical outlet Warning The POC S176 is supplied by a 100 Watt power supply and a special adapter as depicted in the model above A If a medical adaptor is connected to the POC S176 the customer must ensure legal and regulatory compliance and that the device meets the law and standards compliance requirements of this hardware 2 2 2 Switching on the Power
35. stallation The guidelines below will help you determine the steps necessary to install your operating system on the panel PC hard drive Note Some distributors and system integrators may have already pre installed system software prior to shipment of your panel PC pu E If required insert your operating system s installation or setup diskette into the exter nal diskette drive until the release button pops out The BIOS supports system boot up directly from the CD ROM drive You may also insert your system installation CD ROM disk into your external CD ROM drive Power on or reset the system by pressing the Ctrl Alt Del keys simultaneously The Point of Care Terminal will automatically load the operating system from the dis kette or CD ROM If you are presented with the opening screen of a setup or installation program follow the instructions on screen The setup program will guide you through preparation of your hard drive and installation of the operating system POC S176 User Manual 10 2 5 Installing the Drivers After installing your system software you will be able to set up the Chipset Graphics Ethernet audio and touchscreen functions from your own external CD ROM drive All the drivers except the CD ROM drive driver are stored in a CD ROM disc entitled Drivers and Utilities The standard procedures for installing the Chipset Graphics Audio and Ethernet drivers are described in Chapters 3 4 5 and 6 respectiv
36. sult in serious personal injury VESA mount installation should be completed by a professional technician please contact the service technician or your retailer if you need this service The detailed installa tion procedure is specified in Appendix A CLASSIFICATION WB Supply Class adapter No applied parts IPX1 Continuous operation Not AP or APG category Warning This device is not suitable for use in the presence of flammable anes thetic mixtures with air oxygen nitrous oxide or as a life support sys A tem Maintenance To properly maintain and clean the surfaces use only the approved products or clean with a dry applicator Caution When servicing the device always use replacement parts that meet Advantech standards Advantech Medical cannot warrant or endorse A the safe performance of third party replacement parts for use with our medical device Make sure users do not come in contact with SIP SOPs and the patient at the same time POC S176 User Manual iv When connecting electrical devices the operator is responsible for ensuring that the resulting system meets the requirements set forth by the following standards EN 60601 1 IEC 60601 1 Medical electrical equipment Part 1 General requirements for safety EN 60601 1 1 IEC 60601 1 1 Medical electrical equipment Part 1 1 General requirements for safety Collateral standard Safety requirements for Medical electrical systems EN 60601 1 2 IEC 60601 1 2
Download Pdf Manuals
Related Search