DBM04 user manual - 0318 - Videsur
Contents
1. H 264 Digital Audio Video 2 4Ghz Wireless Baby Monitor 3 2 TFT PORTABLE Digital Video Recorder The pictures diagrams and certain functions described in this manual may differ from the actual product due to different firmware version SAFETY AND GENERAL INFORMATION Important information on safe and efficient operation of this product Before operating your Wireless Baby Monitor please read all these safety and operating instructions completely and then retain for future reference 1 Your Baby Monitor is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision 2 Do not place the camera on any surface or mount it on any wall where the camera or the AC adapter cords are within baby s reach 3 Never place the camera inside your baby s crib bed or playpen 4 Never cover the camera and monitor e g with clothes towels or blankets 5 Position the camera monitor and AC adapters to allow adequate ventilation 6 Never use or place your camera and monitor in moist places or near water For example do not use near a bathtub washbowl laundry tub kitchen sink in a wet basement etc 7 To prevent overheating keep the camera monitor and AC adapters away from heat sources such as radiators heat registers stoves or other appliances including amplifiers which produce heat 8 Keep the camera out of direct sunlight 9 Disconnect the AC adapter from wall outlets dur2. are saved in that folder e Use Up and Down keys to select the folder and press OK Menu button to open that folder e Use UP and Down keys to select the file from the file list and press OK Menu to display picture e Use Left and Right keys to display next or previous picture inthe selected folder e Press ON OFF Esc key to exit preview mode NOTE To view pictures TF card must be installed in the monitor see section 1 2 for instructions to install the card and there must be saved pictures on the TF card See section 4 11 for instructions to take pictures 4 11 1 TAKE PICTURES To take photos use the RIGHT navigation button it is the shortcutkey for taking pictures and is marked with Co symbol Pressing and releasing the button takes a picture 15 4 12 SETTINGS DATE AND TIME Use this option to set the date time and the time format 12hour 24hour fo Menu OK Main Menu Settings Date and Time 4 13 SETTINGS UP amp DOWN BUTTONS FUNCTION Use this option to assign function to the UP and DOWN buttons on the monitor By default up and down buttons are assigned Volume control function but if multiple cameras are being used and you want to manually switch between cameras then use this menu option to assign Camera Selection function to up and down buttons NOTE Once camera selection is assigned to the Up and Down button the Volume menu option must be used from the Main Menu to adjust volume see sec
3. on red and the battery symbol charged the power status CED tlashesgreen andioncethe camera is powered on me eee and below the metal pins in the battery compartment align with h on the display flashes When the receiver is turned off the battery is fully charged the LED becomes solid _ To turn camera off press ON OFF PAIR button for 5 seconds Mini USB connection the cut out portions of the battery as show in Fig 3 and Fig 4 j Pr 7 charging status indicator LED still turn on red and the battery When the transmitter is turned off and the battery is getting e When the battery voltage falls below 3 6V the Power Indicator On Off PAIR button e Close the battery compartment by aligning the cover with the 3 D i symbol on the display shows battery symbol with charging status charged the power status LED flashes red and once the battery is LED turns red from green indicating the battery needs to be Power and charging battery compartment and pressing and pushing the cover up as Tn e The charging time for a fully discharged rechargeable battery when fully charged the LED turns off charged Status indicator LED show in Fig 5 j the device is turned off is approximately 5 hours The charging time The charging time for a fully discharged rechargeable battery when The receiver displays Camera battery is low on the screen Microphone f is doubled if the receiver is turned on while the battery is being the device is turned off is approximate
4. seconds else the monitor will return to audio video mode 4 9 This is done the same way a camera is registered 10 The FEEDING ALARM iS SEtthe same way as MORNING SAED ra coi i a i 9 13 4 10 VIDEO REVIEW Use this option to view recorded videos fy Menu OK Main Menu Video Review The recorded videos are saved as files on the memory card TF memory card is sold separately the video files are saved in a folder There is a separate folder for each date all files recorded ona particular date are saved in that folder e Use Up and Down keys to select the folder and press OK Menu button to open that folder e Use UP and Down keys to select the file from the file list and press OK Menu to play that video e Use Left and Right keys to play next or previous recorded video in the selected folder e Press ON OFF Esc key to exit preview mode NOTE To view recorded videos TF card must be installed in the monitor see section 1 2 for instructions to install the card and there must be recorded videos on the TF card See section 4 16 for instructions to record videos 14 4 11 PHOTO ALBUM Use this option to view snapshots photos taken and saved on the TF memory card Ea Menu OK Main Menu Photo Album The snapshots are saved as files on the memory card TF memory card is sold separately the photos are saved in a folder There is a separate folder for each date all pictures taken on a particular date
5. 2 322 3 Z2 UP and DOWN buttons to move through individual menu options UP and DOWN buttons to change the hours and minutes in Audio Only Mode the monitor will not switch to audio video 3 IRE z I or change volume and brightness 4 3 BRIGHTNESS Thumbs up sign is displayed on the camera list next to Pressing MENU OK button to move from hours to minutes mode when sound is detected it will only switch to audio video 8 LEFT and RIGHT buttons to move through individual menu options Use this option to adjust screen brightness registered cameras Press MENU OK once more in order to confirm the setting mode if a key is pressed on the monitor 3 3 ortake snapshots and do audio video recording Choose No to cancel the registration operation eee 2 _ ON OFE ESC button to roiun to the main menu press and R Menu OK Main Menu Brightness NOTE If the registration process is not successful repeat this NOTE ALARM STATUS must be turned on touse Alarm function Note In Audio Video mode when there is no sound detected Sels z A 2 Off is default setting above set sensitivity level for 5 minutes the speaker sound is o 3 d S S release F ati process agar E muted The sound is activated when sound above set sensitivity o z a Warning All selections must be made within approximately 10 Use left or right navigation keys to adjust brightness You can unregister a camera in the event that you no longer need it l i tivity i o S 5
6. ctive rechargeable battery only with original Warning Only qualified technicians or our technical staffis _ You can also mount the camera using the stand included as Menu OK button ae rechargeable battery Conventional battery must not be used in the authorized to change the rechargeable battery in the transmitter described in section 1 3 hardware to mount the stand to a wall RESET button receiver z or ceiling not included ON OFF ESC butt ae ing indi aon Note For safety reasons and for optimum sound transmission we arging m lca on Fig 2 Eg 3 IMPORTANT Turn off monitor power before installing the TF card recommend that you keep the transmitter at least 1 meter 3 feet Active Camera indicator 9 e To access TF card slot open the battery compartment by pressing form the baby LEDs and pushing down on battery compartment cover and remove IMPORTANT Never place camera in the baby s cot bed or playpen Mini USB connection rechargeable battery if already installed 3 Wi 4 e Push the TF card holder shell down to unlock it and then flip it open yh sf NOTE The transmitter will automatically turn on when plugged e Putthe TF card in the card slot aligning it with the TF card into AC adapter or computer NOTE ON OFF Press and PUSH UP OUTLINE printed in the slot e The transmitter can be powered with the AC adapter the rech hold button for 3 to Sseconds e Close card holder shell and push it up to lock it NOTE The receiver will au
7. esee goezsce place the receiver confirm selection Press Esc key to exit from the Main Menu If the camera does not detect sound in the set time the screen 5 ESE085 g ag E gt 8 g E02 e Power can be supplied to the receiver by using AC adapter recharg Cy Menu OK Main Menu Brightness Menu OK Main Menu Camera Selection turns off automatically and switches to Audio Only Mode 7 2 ze 5S et zo Eo 2 55 SS A eable battery or from computer s USB port using a USB cable 4 o Cy cJ Manual Selection i SOEN 2 iS a5 Se 268 ae Z 5 wE 2z 8 3 NOTE The receiver automatically turn on when power is 4 5 LANGUAGE Bo Menu OK Main Menu gt Voice Activation 3 2 E53 88 ZOce Bes Eppe ES supplied using an AC adapter or via computers USB port Use this option to set the Screen Menu Display Language Select any of the registered cameras Thumbs up sign next to the Close video time Never 15 30 60 90 120 BS ESSESS 530x22 EPI FS e The receiver can also be powered on when the ON OFF ESC button 9 F choose from 5 different languages English French German camera to watch i f f aSjsal ess 3 T LEG Se 532s o gt is pressed for 5 seconds The welcome screen is displayed e Italian or Spanish It you Want ine audio and vides to be on all the time Set Clase 5a gate BE Sees poa 5 2 Pogsss After a short start up phase the video from camera is displayed or xyes gt Main Menu gt Camera Selection vagoti me ONENE Sesg se EFFEEF FEFEFE 2 i
8. ing long periods of non use 10 Use only the AC adapters provided Use of any others may damage the camera and or monitor 11 If traveling abroad make sure that the voltage shown on the power adapters corresponds to the local power before plugging inthe AC adapters into the electric outlets NOTE REGARDING FCC COMPLIANCE Users are not permitted to make changes or modify the device in any way Changes or modifications not authorized by the party responsi ble for compliance could void the user s authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device many not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation FCC Notice to Users This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television recepti
9. ly 5 hours The charging time IMPORTANT In case of audio or video interference press and P Warning There is a danger of explosion in the event the rechargeable charged The charging status indicator LED turns OFF very dim doubles if the transmitter is turned on while the battery is getting release RESET button to switch transmitter to a different channel Mount hole batteries are not properly disposed off Never use conventional PZ RED when the battery is fully charged charged NOTE ON OFF Press and hold button for 3 to 5seconds batteries only use rechargeable lithium ion batteries e Screw the camera on the stand mount and setup as shown Receiver battery can be charged using AC adapter or via computer s PAIR Press and quickly release button or screw it to a wall or ceiling screws no included USB port using a USB cable 7 3 4 5 6 2 6 2 OS v 3 USING THE RECEIVER MOINTOR 4 1 MAIN MENU 4 4 ZOOMIN 4 7 CAMERA SELECTION 4 9 VOICE ACTIVATION i 3 2g Ba ga 2 Press the Menu button to display Main Menu on the monitor screen Use this option to enlarge the picture or zoom in on a specific region Use this option to manually select registered cameras or enable Use this option to set the standby time to turn off screen to save a le 3 3 22 5 E slo Ex a2 e Insert receiver in the PU cover stand and select flat surface to use navigation keys to pick a menu option and then OK button to of the picture Auto Scan mode battery power or setup Audio Only mode S oo gSS
10. on which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help CARE AND MAINTENANCE 1 Keep all parts and accessories out of children s reach 2 Fingerprints or dirt on the lens surface can adversely affect camera performance Avoid touching the lens with your fingers 3 Should the lens become dirty use a blower to blow off dirt and dust or a soft dry cloth to wipe the lens 4 Keep the camera dry Precipitation humidity and other liquids contain minerals that will corrode electronic circuits 5 Do not use or store in dusty dirty areas 6 Do not use or store in hot areas High temperatures can shorten the life of electronic devices and warp or melt certain plastics 7 Donot store in very cold areas When the system warms up the moisture can form inside the case which may damage electronic circuit boards 8 Do not attempt to open the case Non expert handling of the device may damage the system 9 Avoid dropping or strong shocks 10 Operate the product using only the AC adapters included or provided as an accessory 11 Do not overload electrical ou
11. puter s video from it Bo be e E ee ee oe h 5 35 32 SaeSss gaeses USB port charging status indicator LED will be bright red 45 Menu OK Main Menu Volume Before registering camera please turn on both the receiver and 4 8 ALARM MORNING CALL y ig lt a ES Sorge g Be regs indicating battery is getting charged transmitter This option is used to set individual FEEDING ALARMS and the es a SoLl8s Sofo8s Use left or right navigation keys to adjust volume Menu OK Main Menu Register Camera Camera 1 MORNING CALL IMPORTANT Voice Activation feature switching mom audio only DES SS Gbn0 es 4 RECEIVER MONITOR MAIN MENU NOTE If up and down navigation keys are not assigned to 9 Register Camera 1 Yes mode to audio video mode can be disabled by setting activation cn manually switch between cameras see section 4 13 for details On transmitter camera On Off Menu OK Main Menu Alarm Morning Call aa Ny t9 ai oaa is always on When activation st E Use the following buttons to navigate the Volume can also be adjusted directly by using Up Vol and Note Press and quickly release the ON OFF PAIR button on the SEnSHIVIY 19 S6110 eee S P 7 ae 5l 5 RER 5 3 MENU OK button to display main menu and to confirm selection down Vol navigation keys CAMERA to complete pairing process In order to set the respective alarm select ALARM TIME Using the When Activation sensitivity is set to Never and monitor IS lt 2
12. ransmitter with integrated camera 1 xreceiver with 3 2 TFT display and loud speaker 2 x5V DC 1000mA adaptors for Transmitter and receiver 1 x rechargeable lithium ion battery for receiver 1 x integrated rechargeable lithium ion battery for transmitter 1 x USB cable 1 x camera mounting bracket 1 x monitor PU stand 1 x manual NOTE You can purchase replacement accessories for the receiver and transmitter Please use only original replacement accessories We shall not accept any responsibility of material damage or personal injury in the event you do not heed theses instructions in which case all guarantee claims shall become null and void 1 Up b tton Vol me adjustment Select camera Menu navigation She e a T battery in the receiver must be fully wee battery supplied with the transmitter camera F timal t issi th inth tob j igati 1 1 INSTALLING RECHARGEABLE BATTERY IN RECEIVER 5 e For optimal transmission place the camera inthe room tobe Down button Volume adjustment Select camera Menu navigation charged before the device is used for the first time on battery power must be fully charged before it is used for the first time on battery Ha moe in such a way E to ensure the optimal surveillance of Left button Take a snapshot Menu navigation power your baby or the elderly Right button Audio Video Recording Menu navigation Warning Replace defe
13. s di i Menu OK Main Menu Languages Auto Scan glass Sre EL azSestos ai e CAMERA T message iS displayed on the monitor fe Ea fo i i one The screen turns on automatically when the camera detects BS GZ8SE83 GFcS8FS G3260882 Pressing ON OFF ESC button for 5 seconds turns monitor off 4 6 REGISTER PAIR CAMERA Use this option to select cycle time for camera display Each sound and the sound level is louder than the set sensitivity av 2 ae Note If the camera is powered ON and within range but the Menu OK Main Menu Use this option to register camera if it is not already registered registered camera gets displayed on the monitor for the duration There are 3 levels of sensitivity to choose from Low Medium s 2 Ogck ossis monitor displays CONNECTING CAMERA 1 Please before using it for the first time This menu option is also used to selected under Auto Scan High Or choose Never under close video Time to disable s 3 gsog2 Seees reregister camera The camera can be registered via the 4 2 VOLUME register additional camera s This monitor supports up to 4 cameras IMPORTAN NOTE To disable auto scan or if only one camera Audio Only Mode gt 65 26 22353 22563 MULTI CAMERA menu option see section 4 6 for details Use this option to adjust volume A camera must be registered before the monitor can receive audio is registered set Auto scan to Never i PEN ioe S2 2segs esses e When the monitor is plugged into AC adapter or com
14. smission of wireless signal depends on the physical conditions determine the range of your baby monitor by testing itin your surroundings Inopen area under ideal conditions achieve a range of up to 200 m 600 feet The actual range depends you can mainly on conditions Like the location of the transmitter the type of building construction material and presence of other wireless devices 18 CE FE
15. tion 4 2 Menu OK Main Menu Settings Up amp Down Buttons Function 4 14 SETTINGS BACKGROUND Use this option to select blue background or no background black Blue or black background is displayed when an error message is displayed on the monitor or when monitor is switching between cameras multi camera in use fo Menu OK Main Menu Settings Background Display 4 15 SETTINGS SYSTEM INFORMATION Use this option to display System ID firmware version firmware release date and size of the installed memory card fo Menu OK Main Menu Settings System Information 16 4 16 MOTION DETECTION Use this option to enable manual or motion detection based video recording 4 16 1 MANUAL RECORDING For manual recording Motion Detection must be set to NEVER x Menu OK Main Menu Motion Detection Never While monitor is displaying video press and release RIGHT navigation key which is marked by red e symbol on the monitor to start video recording Red e with timer is displayed in upper left corner indicating video is being recorded Press this key again to stop video recording NOTE See section 4 10 for instructions to view recorded videos 4 16 2 MOTION DETECTED RECORDING To enable video recording when motion is detected set Motion Detection to a setting other than Never and press and release RIGHT navigation key which is marked by red e symbol on the monitor Low x Men
16. tlets or extension cords This can result in a fire or an electric shock TABLE OF CONTENT Main Re ature seer eara n Ee EEn Ee n N EE a EEE aeit 1 Monitor and Camera Djiagramseeeeeeeeeeeeeeeeeeeieietetetetetettitittt 2 Preparing Baby Monitor for First Time Useceeeeesererrereereres 3 Using the Transmitter Camera ccererreceteeeeeeteteeeeteeteeeteees 7 Using the Receiver Monitor e eee eetetetetttetretittiti tee 8 Receiver Monitor Main Menu lt t serres vecci tinu seutas sians eiae 9 Register Cameraseeeeeeeeeeseeterererererertsrertsrterteresesetenesesesenenenes 10 Photo Album T aking PICtUrTE Se trinersarrsers iren eriin idrate innritan 15 Motion Detection Audio Video Recordingteeeeeeeeeeeeeeteenennnnnnennnn 17 Additonal Remarks oiire thas ea aa Eaa TAE a E 18 MAIN FEATURES Digital H 264 encoding amp decoding technology Transmit rate 20 25Frames second Transmits up to 600 feet range in open area Friendly On Screen menu for easy adjustments Supports up to 4 cameras Baby Monitor works in 2modes Audio amp Video or Audio only In auto scan mode the cycle time between cameras can be adjusted from 10 60 seconds Digital zoom with selectable regions Voice Activation VOX Feature Feeding Alarm setup Feature Multi Language Support Recording amp photo function Review Recording to TF micro SD card Manual or with motion detection Built in Rechargeable Batteries for Camera and Monitor BOX CONTENT 1 x t
17. tomatically turn on when plugged into NOTE The transmitter automatically turns on and the battery argeable battery or via computer s USB port using a USB cable ESC Press and quickly release button e Reinstall the rechargeable battery and close the battery AC power or computer s USB port starts getting charged when AC adapter or a USB cable e To use the rechargeable battery the device shall be turned on Fig 5 compartment cover e To charge the rechargeable battery plug the AC adapter connected to a computer is plugged into the MINI USB without the AC adapter plugged in CAMERA e Open battery compartment by pressing and pushing the battery NOTE See section 1 1 for illustrations to open and close the battery 100 240 V AC 50Hz 5 V DC 1000mA into Mini USB socket socket on the transmitter e The transmitter turns on when the ON OFF PAIR button is pressed Only for firmware upgrade cover down as show in Fig 1 compartment cover e The battery starts charging automatically once the receiver is PORS for 5 seconds As soon as the camera is powered on the LED Camera Lens e Insert rechargeable battery in the battery compartment as show connected to AC adapter When the receiver is turned on the e When the transmitter IS turned on andthe battery Is getting indicator turns solid green or flashes green to indicate the RESET butt in Fig 2 Align battery so the small plastic corner pieces above 1 3 USING CAMERA STAND MOUNT charging status indicator LED turns
18. u OK Main Menu Motion Detection Meidum High NOTE Red e with timer is displayed in upper left corner indicating monitor is in recording mode This baby monitor uses software based motion detection in which monitor compares the change in video displayed on the monitor The Low Medium and High settings determine what level of change in video should trigger motion detection alert to start video recording With Low setting a significant change in displayed video will generate motion detection trigger to start video recording whereas 17 with High setting even a small change in displayed video will generate motion detection trigger to start video recording The monitor records video for 10 seconds with every motion detection trigger To cancel motion detected recording press and release RIGHT navigation key which is marked by red e symbol on the monitor 5 ADDITIONAL REMARKS 5 1 BATTERY STATUS The battery status indicator displays ANIE 4 different charging states When the solid battery symbol I is displayed the rechargeable battery is fully charged The battery symbol flashes when the rechargeable battery needs to be charged 5 2 ALARM Ifan alarm is set the alarm symbol ety will appear on the display 5 4 SIGNAL STRENGTH INDICATOR The signal strength indicator Yall works similar to mobile phone signal strength indicator the signal bars change indicating camera signal strength 5 5 RANGE Tran
Download Pdf Manuals
Related Search