Home

User manual - DMTrade.pl

1. eiie uber eas 25 9 8 2 26 9 8 3 LAN TU OI Y Te a 26 9 8 4 mM 26 TIO Function g idE kinetische 27 10 1 OK liS EE sl eh ea a er 27 10 2 EPG 27 10 3 Information BOX 28 10 4 Changing SOIC OS 29 10 5 Volume CONE Metu oT 29 10 6 Soundtrack amp M ltifeed AUUIO vos rhet ede tuse baeo bte a tr Ni 29 10 7 Teletext S avreise DRE UNIO tuse SEA as SM E NUN DEEP SUD 29 10 8 Pause Ce RESUME bmi botte oet diete t tet e eet 29 User manual 10 9 ZPO ccc ods ea ees aga 29 10 10 Time Shift optional only for PVR ready receivers cceeesseecccccecccceeeseeseeeceeeeeeeeeesseeeseeeeeseeeeeesauagees 29 10 11 Recording Edit the reserved delayed Recording optional only for PVR Ready receivers 30 10 12 Immediate Recording by RECORD e button optional only for PVR Ready receivers 30 10 13 Recording by EPG optional only for PVR Ready 31 10 14 Playb
2. button to choose soundtrack among Left Right and Stereo At Multilingual item use gt or OK button to choose the language of multilingual audio if any Be noticed that the above setting is for current service only When new service is viewed the soundtrack and language settings will return to what was selected in the viewing service 10 7 Teletext amp Subtitle If the broadcaster supports Teletext or Subtitle the Teletext or Subtitle icon will be displayed on the Information Box There are VBI insertion mode and soft emulation mode in Teletext In the VBI insertion mode which is always on you can watch the Teletext with your TV using the RCU of your TV To watch Teletext with VBI insertion your TV must support Teletext In the software emulation mode you can watch the Teletext using the RCU of PVR event though your TV does not support Teletext Press button to setup and watch Teletext Use v and OK button to select the language of multilingual Teletext or disable Teletext display by using EXIT or MENU button v and OK button to select the language of Multilingual Subtitle or disable Subtitle display by using EXIT or MENU button Press button to setup and watch Subtitle Use 10 8 Pause amp Resume To pause the live video press i button you save this picture by pressing F1 button and then you can use this picture as boo
3. If more than one audio language is transmitted you may select one language among the language transmitted by press 16 button The supported language can be changed without any notice Audio Priority You can select the Audio Priority among Dolby and language by press OK button e EPG Language It is an item for changing the language of the EPG User manual Teletext Language It is an item for changing the language of the Teletext As long as the services support it the Teletext language is changeable by press button on your RCU The supported language can be changed without any notice Subtitle Language It is an item for changing the language of the Subtitle As long as the services e it the Subtitle language is changeable by press button on your RCU The supported language can be changed without any notice e Subtitle Display Select the mode of Subtitle display among Manual and AUTO by using OK button 9 4 2 Parental Control 1 Preference ay ae Language Receiver Lock ON Parental Control Censorship Classification View All Time Setting Allow Time Control Enable A V Control Allow Time 18 00 21 00 UHF Setting Change Password ais Miscellaneous Settings Confirm Password Return Exit eis ja Enter Receiver Lock It is an item for lock the receiver or not OFF means unlocked ON means controlling the access to the specific menus wit
4. might be taken back by your local collection facilities In other Countries outside the EU If you wish to discard of this product please contact your local authorities and ask for the correct method of disposal User manual 0o o Features MPEG Fully DVB S DVB S2 H 264 HD compliant 8000 channels TV and Radio programmable Multilingual menu text support Channel switching time less than 1 second Channel list editing Favorite channel list editing True color On Screen Display OSD Full Picture In Graphic PIG function Electronic Program Guide EPG for on screen channel information Subtitle supported Teletext supported by VBI insertion and software emulation Parental lock facility by channel and program event Program and Channel information transfer from receiver to receiver Exciting games embedded S PDIF for digital audio or Dolby AC 3 bitstream output DiSEqC 1 0 1 1 1 2 and USALS HDMI HD Video Audio Output Dual Decoding PIP Software update via LAN port USB 2 0 Host VFD Display for service information RTC Real Time Clock LAN 10 100 Mbps Ethernet optional Time Shift optional only for PVR Ready receivers Video Recording optional only for PVR Ready receivers Recording 2 channels the same time watching 3 channel within 1 transponder optional only for PVR Ready receivers Recording one channel and TimeShifting another channel optional only for PVR
5. 13 18 e TP Selects the Transponder to catch the strong signal e LNB Select the L O Frequency of the LNB among C Band 5150 Ku Band 11300 Universal 9750 10600 LowBand 9750 HighBand 10600 One Cable L and One Cable H by using add left key and right key button icon buttons Also you can insert LNB frequency by using Numeric key of the RCU when on the User xxx item 22kHz If you are using a 22KHz tone switch box make 22kHz tone switch ON or OFF to select LNB or antenna NOTE If the LNB is set to Universal 9750 10600 it is not possible to set 22kHz because high or low band is selected by 22kHz 12 Switch ON or OFF to enable or disable the 12 DC power supply DiSEqC 1 0 The PVR is designed to be DiSEqC 1 0 compatible This allows multiple antenna to be connected to the PVR at the same time If you are using two or more fixed antenna or LNBs then it is recommended to use a DiSEqC 1 0 switch Select one of DiSEqC A DiSEqC B DiSEqC DiSEqC D or OFF according to the option or the configuration of DiSEqC switch box or antenna DiSEqC 1 1 The PVR is designed to be DiSEqC 1 1 compatible This allows multiple antenna to be connected to the PVR at the same time If you are using two or more fixed antenna or LNBs then it is recommended to use a DiSEqC 1 1 switch It is possible to connect up to 16 antennas Select one of 1 to 16 or OFF according to the option or the configuration
6. Ce DO Manufactured under license from Dolby Laboratories DIGITAL Dolby and the double D symbol are trademarks of Dolby Laboratories 38
7. Ready receivers Recording one channel and PIP another channel within the same transponder optional only for PVR Ready receivers User manual 4 Remote Control You can power on off the receiver operate on screen menu and use a variety of hot key function Switch the PVR between Operation and POWER 0 Standby mode Wtaczanie lub prze czanie w stan e czuwania Standby Display the sleep time At the sleep time SLEEP the power is automatically turn OFF and the PVR goes to the STANDBY mode UR Display and alter the UHF setting in menu EB ED EB V Format Switch the TV Standard on the Screen If you have problem with setting video format pqrs switch this button between until setting the wxyz best video resolution Enable Disable the Audio TV SAT Switch TV or AV mode on the screen he TV Radi TV Radio M A Select the TV Radio mode Q Find service by name in service list FIND organizing services EPG menu and normal picture mode Display the favorite service list 0 9 Numeric Select the TV or Radio services and menu options TV SAT 2 8 Find FAV buttons Display the Menu on screen or return to previous menu from submenu Q Enable the zoom function Zoom Display the program information box on the ow motion INFO screen D Display the EPG on screen when available Play mode Return to the screen Se
8. Sound Track and the multilingual if multilingual is available Display the satellite list at normal picture PIP Czerwony Is turning on PIP function Enable the tel TELETEXT nable the teletext Zielony SUBTITLE Activate the subtitle selection Window Select the subtitle language in the list Z lty Display Multi Picture menu on the screen Multi Picture Niebieski User manual 5 Front panel Remote Sensor Signal Led Common Interface Card Slot POWER Led Display STANDBY ON MENU POWER KEY To switch the receiver power on stand by MENU KEY To enter into the main menu lt gt KEY To adjust volume level or to move cursor left or right in the menu A v KEY To change channels or to move cursor up or down in the menu OK KEY To see TV Radio channel list or to confirm in the menu Remote Sensor Detects infrared signal from remote control unit POWER Led Lights up while the receiver is power on Signal Led When receiving signal is strong the signal led is lighted Card Slot One or two optional slots CA Interface for Conax Insert the smart card chip side up Common Interface Two socket for Conditional Access Modules CAM optional Display VFD type Indicates operating status of receiver VFD Display HB EEERPE ER FI G rec HE Bab ep wre 28 O B A O ia mm HT BT 0 E gg game Oh gedag gesag aud Fam 7 2 E 8 8 peg
9. scan Automatic install satellite and search channel The receiver will detect your antenna and search available signals and download services for you automatically Manually install satellite and search channel You need to choose your interested satellites and set right parameters for LNB Type 22KHz Tone 12V DiSEqC1 0 or Motorized DiSEqC1 2 or USALS items then press button Red to do scan to complete install For more details please refer to the chapter Manual Installation of Menu Operations 9 Menu operations Now this chapter assumes that the HD Receiver system has been installed correctly meaning e The satellite antenna for the HD Receiver has been installed connected to the HD Receiver e The HD Receiver is connected to the TV e The RCU has batteries and ready to control the HD Receiver If the HD Receiver has not been installed or connected properly please refer to the Connecting your equipment on this manual Many of the functions of the HD Receiver are available from the Main Menu Press MENU i bite to open it gt menm e 3 vat nstaltation 9 1 Service 9 1 1 Organizing services This menu can be used to move lock hide rename and delete Services e Move You can reorder and move the service to the preferred position Mark the desired services using OK button use MP button to choose Move mode and press button then us
10. software file from USB hard disk e Start upgrade After you select the Upgrade File press OK button on Start upgrade item the receiver can upgrade automaticlly You can also Press Archive Button to direct enter the upgrade from HDD meun list Gran Alp VE Start Upgrade 9 5 4 Backup to HDD Backup Software It is used to backup software to USB hard disk select path and assign the file name then press OK to start backup Backup data It is used to backup data to USB hard disk select path and assign the file name then press OK to start backup Backup Default It is used to backup default to USB hard disk select path and assign the file name then press OK to start backup Backup Data amp Default It is used to backup Data amp Default to USB hard disk select path and assign the file name then press OK to start backup e Backup all It is used to backup all to USB hard disk select path and assign the file name then press OK to start backup User manual 9 5 5 Contact This menu to show the dealer s information such as Name Telephone and Website 9 6 Conditional Access optional Sint Gam Common interface 9 6 1 Smart card We provide two CA slots for user to use Receiver has build in smart card module with CONAX system By using cards in this system provided by operators it is possible to watch many scrambled cha
11. the functions as follows Red button You can change the group of services by pressing Red button Complete means list all services Satellite means list services belonging to certain satellite you chose only Favorite means list services belonging to certain FAV group you chose only Provider means list services belonging to certain provider you chose only CAS means list services belonging to certain CAS you chose HD means list services belonging to certain HD group you chose Green button view detail EPG information of current service I Yellow button Enter the Property submenu in this menu you can set current service s FAV Lock or Skip state also you can Delete Rename the current service Blue button Sort service list by service No Numeric service name Abc scrambled services after free services Free CAS free services after scrambled services CAS Free or one transponder by one TP Q button Locate certain service by name quickly 1 button Display detail information of current service channel name satellite amp transponder provider name and CAS name etc A V P P buttons Browse the list then press OK button to switch the viewing service to the highlight one 2 2 button change list from TV services to Radio services or verse 0 9 buttons Switch to the certain service directly 10 2 EPG 08 00 08 30 Journal e
12. 1 to 10 Signal Beep Level Adjust the Beep Level of the signal The adjustable level is 1 to 8 and OFF 9 5 System 1 0 17 18 15 17 Jun 11 2008 9 5 1 System Information Check the HD Receiver s system information here It shows the Model ID Hardware Version Software Version Loader Version Latest Update and Manufacture User manual 9 5 2 Upgrade RS232 This item is very convenient to transfer HD Receiver content such as software data or default data to other HD Receiver for upgrading the HD Receiver via the RS232 Upgrade Software It is used to transfer HD Receiver Software to other HD Receiver for upgrading the HD Receiver Upgrade Data It is used to transfer HD Receiver Data such as service information to other HD Receiver for upgrading the HD Receiver Upgrade Default It is used to transfer HD Receiver factory Default data to other HD Receiver for upgrading the HD Receiver e Upgrade Data amp Default It is used to transfer HD Receiver current Data and the factory Default data to other HD Receiver for upgrading the HD Receiver e Upgrade All It is used to transfer HD Receiver All include software data and default data to other HD Receiver for upgrading the HD Receiver 9 5 3 Upgrade from HDD In this menu you can upgrade the software from USB hard disk conveniently Open file The open file item is for select the appropriate
13. 1920X1080i 720 576 PAL 720 480 NTSC MPEG 1 Layers 1 2 Dolby AC 3 Left Right Stereo 32 44 1 and 48KHz Transport Stream Input Rate Aspect Radio Video Decoding Video Resolution Audio Decoding Audio Mode Sampling Rate 36 User manual RF Modulator Optional CH21 69 for the Demodulation PAL BG I DK selectable 75 Ohms Male Female UHF 470 860MHz PLL type TV Standard RF Connector Frequency Range A V amp DATA INPUT OUTPUT Video CVBS RGB output Audio L R output Video CVBS output Audio L R output Video CVBS RGB input Audio L R input 1x YPbPr output Video CVBS output Audio 2x L R output TV SCART VCR SCART S PDIF Optical Coaxial Digital Audio or Dolby AC 3 Bit Stream Output Transfer rate 115 2Kbps RS 232C 9 pin D sub Type USB One USB 2 0 slot Compatible for VER1 2 HDMI Type A PHYSICAL SPECIFICATION Size W H D 360mm X 266mm X65mm Net Weight 2 49 kg Operation Temperature 0 C 45 C Storage Temperature 10 C 70 C Storage Humidity 5 95 RH Non Condensing 37 User manual _ 14 Declaration of conformity The manufacturer herewith declares the conformity of that product with the following directives and standards Low Voltage Directive 2006 95 EG EN 60065 2002 A1 2006 EMC Directive 2004 108 EG EN 55 013 2001 A1 2003 A2 2006 EN 55 020 2007 EN 61 000 3 2 2006 EN 61 000 3 3 1995 A1 2001 A2 2005 Model Digital Satellite Receiver DVB S
14. ESI HEN 10 User manual 6 Rear panel 100 250V 50 60Hz Please refer to the diagram above for all possible connections of your receiver Do not connect the unit to the mains socket until all other connections have been made and checked Your configuration can vary depending on model POWER ON OFF SWITCH To switch ON OFF the receiver power supply LOOP This enables the connection of another receiver LNB IN 13 18V 500mA This port is to connect the coaxial cable from LNB of your Dish TV This is used to connect your TV through SCART cable VCR Audio and Video input output socket for the Video cassette recorder or suchlike VIDEO This RCA connector is used to connect any external video 0 12V 50mA This is used to Connect 12V to an external 0V 12V switch AUDIO R L These RCA connectors are used to connect any external audio amp or system S PDIF Digital Audio interface connect to AV amplifier S PDIF input terminal HDMI Audio and Video output socket for TV set with HDMI Input Jack only Power for USB USB port for additional power only for some of USB hard disk drives WARNING Do not connect standalone USB devices to this port USB Data USB 2 0 Host connect to USB hard disk or flash disk RS 232C SERIAL PORT This is used to connect your receiver to a computer through a serial cable Ethernet optional Network port you can get a new software updates from this port YPbPr Comp
15. User manual High definition digital satellite receiver Model ID 7101 English 3 2009 jp User manual Contents 1 Safety ld 4 2 Erin PENN APPS 6 3 es oce eee 7 4 RES 8 5 Fo 10 6 panel m 11 7 SOIE N PE 12 8 GENE Ned 14 8 1 FG 14 8 2 BOX SOLUTES eda 14 8 3 NAS 14 9 Menu ODS 51 14 9 1 wi pile MT 14 9 1 1 Organizing Services held Wenn epe Oe aee ete eta tee ele iae ede ee ium etd eate eed Ree 14 9 1 2 Organizing TavOurltes ca ea 15 9 2 dtl auo sortent 15 9 2 1 15 9 2 2 Autoilnstallation ere 17 9 2 3 18 9 2 4 Fon a E E rr 18 9 3 PVR optional only for PVR ready 18 9 3 1 Eile list 18 9 3 2 MP3 P er ss 19 9 3 3 HDD oT Mat an COLIT UNO 19 9 3 4 R
16. ack a Recorded Service optional only for PVR Ready 31 10 15 Slow Motion PB Buses va fes batter va uv tell e 32 10 16 Fast Motion PA bakvendte 32 10 17 scii teret ite ppp ese EN BUS UO nee ee MEDIEN 32 10 18 PEPE 33 10 19 Picture PP assess t DARE PRORA nebenbei 33 10 20 Mie DP 33 11 Software 34 2 Trouble hol SJAL 35 5 E D SIEUT 36 14 Deelaration of conformity seserinis ionsar E AOE EEE Ea 38 User manual 1 Safety precautions CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with Warning The exclamation point within arrowhead symbol To reduce the risk of electric an equilateral triangle is within an equilateral shock don t open the cabinet intended to alert the user to triangle is intended to Refer servicing to qualified important operating and alert the user to personnel only maintenance servicing dangerous voltage and to prevent from a risk of electric shock WARNING Do not use this STB where contact with or immersion in water is a possibility Do not use near flower vase washbowls kitchen sinks laundry tubs swimming pools etc WARNING Do not put the candle or lamp stand on the cabinet otherwise there is the danger of fire WARNING The unit should be connected to a power
17. and 5150 06 PanSal 7 68 5E 12v ON 07 PanSat_4 72 0E 22kHz OFF 08 Panamsat 8 166 0E DISEqC A 09 Panamsat 2 169 0E Motor OFF 10 NSS_7 22 0W A Scan GEN JTP Auto DISEqC Relum Exit A Red Scan Select one or more satellites which preprogrammed correspond to the direction of the antenna in the satellite list by using the OK button to go to the Scan menu by using the button Red Scan Mode ALL Network NIT OFF bk Scan Scan Mode Choose your favorable services you want to search among ALL FTA ALL_TV FTA_TV ALL_Radio and FTA_Radio Network If the Network item is set to On and the NIT Network Information Table is available the Transponder s information can be found e OK Scan To start the searching process press OK button To stop the searching process on the way press either the MENU button or the EXIT button This menu User manual will be shown as long as the PVR is searching for services All services found will be listed in two columns on the screen with TV services in one column and Radio services in the other Please note that the search procedure may take a few minutes When the search procedure is completed the screen will show the Confirm info box Select YES to save the services B LT Green Edit w 4 042 4192 V 6000 LNB C Band 5150 22kHz OFF eon 12v OFF DISEqC 1 0 DISEqC A DISEqC 1 1 OFF Power
18. ate collection system for these products Information on Disposal for Users private households in the European Union Used electrical and electronic equipment must be treated separately and In accordance with legislation that requires proper treatment recovery and recycling of used electrical and electronic equipment Following the implementation by member states private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge In some countries your local retailer may also take back your old product free of charge if you purchase a similar new one Please contact your local authority for further details If your used electrical or electronic equipment has batteries or accumulators please dispose of these separately beforehand according to local requirements By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling Information on Disposal for Business Users In the European Union If the product is used for business purposes and you want to discard It Please contact your dealer who will inform you about the take back of the product You might be charged for the costs arising from take back and recycling Small products and small amounts
19. automatically by the GMT received from the broadcast and the GMT Offset you have inserted The Automatic Update ON mode is recommended e Current Date Time The Current Date Time is adjustable only when the Automatic Update is in the ON mode Adjust the current date time by using the numeric buttons e GMT Offset The current time of the local area can be inserted In another word insert the time difference of the local time zone from the GMT The time is adjustable by using OK button e Daylight Time Select ON or OFF to turn on or turn off the Summer Time e Wake Up Time It is an item to set the Wake Up Time or not Sleep Time It is an item to set the Sleep Time or not 21 User manual 9 4 4 A V Control TV SCART CVBS VCR SCART CVBS YPbPr Output ON Screen Rallo 4 3 Full TV Standard PAL Video Brightness Leveld Video Contrast Levels Video Saturation Level TV SCART Select the mode of Video output between RGB and CVBS on TV SCART by using OK button YPbPr Output ON Enable the YPbPr output OFF Disable the YPbPr output Screen Ratio Select your TV screen format among AUTO 16 9 Full 4 3 Full 16 9 Letter Box and 4 3 Letter Box by using OK button TV Standard Select your TV Standard among PAL NTSC SECAM 720P and 1080i by using OK button Video Brightness Contrast Saturation You can adjust the parameter about the Video image
20. ayback To playback the selected file press button Press OK button to select the services among the recorded services list and press button to playback the multi services in sequence automatically B MP3 File List The file list is displayed by pressing O button The file list of MP3 can be selected by lt gt buttons from other list i Red Sort You can Sort the list by press LA Red button ii I Green Options It is very convenient function to Mark the desired services with different options ii Q Yellow Edit a Anew folder can be made by select New folder item the keyboard will displayed input the name and press Red button to confirm b Select the files you want to move then select Move to folder item the list of Folders will appear You can select a folder you want c You can Rename the file or folder by select Rename item d Select Delete item after selecting the files or folders you want to delete You have to confirm it at Confirm box iv Play To play the selected file press gt button Press OK button to select the files among the MP3 list and press gt button to play the multi files in sequence automatically Image File List The file list is displayed by pressing O button The file list of Image can be selected by buttons from other list i Red Sort You can Sort the list by press Red button ii EL Gree
21. by using the OK button The default value is Level 14 9 4 5 UHF Setting Language Parental Control Time Setting AN Control UHF Setting Miscellaneous Settings When the PVR is connected to the TV by an RF cable you may need to select the correct TV standard system e UHF Channel Select a RF channel by using OK button The default RF channel is CH38 When you change the RF channel number you must also change to the same value on the TV If you do not there will be no picture and sound e PAL Format Select the D K 6 5MHz B G 5 5MHz 6 0MHz M 4 5MHz by using OK button The default PAL Format is 6 0MHz e UHF Offset Change the value of the UHF Offset by using OK button The default value is 0 9 4 6 Miscellaneous Setting Language Banner Display Time Parental Control OSD Transparency Time Setting Service Switch Mode A V Control Beep Frequency UHF Setting Signal Beep Level Miscellaneous Settings Banner Display Time Adjust the time out of the info Box Set the period of time that the info Box is displayed on screen The adjustable time is 1 to 30 seconds OSD Transparency Adjust the OSD Transparency of all the menus The available levels are ranging from 0 to 100 Service Switch Mode Select the Service Switch Mode among Blank Fade in out and Unblank by using OK button Beep Frequency Adjust the Beep Frequency The adjustable frequency is
22. disk don t save original document D Rename Press I Yellow button select Rename to rename the recorded service or the folder E Delete Press I Yellow button select Delete to delete the recorded services or folders F Lock Press I Yellow button select Lock to lock the recorded services or folders G Sort Press Red button to Sort by File Name Data Size or Lock H Options Press I Green button to select the recorded services by different types l Find Press Q button to found the services by name J Event Info Press 1 button to display extended event information Select a recorded service at the list Press gt button to start playback Press gt button to display Time Shift progress bar You have to press 9 button once more to display Time Shift progress bar during Trick mode such as Fast Forward Reverse Playback Slow motion To go to the desired playback position press or PP button This function is valid while the progress bar is displayed 4 button into Trick mode you can enter User manual the position by percent with numeric button of RCU the playback position will be moved to the point Press OK button to select the services among the recorded services list and press gt button to playback the multi services in sequence automatically You can press HE Blue button add the selected services into P
23. e press Red button to Start Format 9 3 4 Record List You can enter Record List menu directly from here by press OK button if the PVR is recording now You can also enter this menu by press re White button when watching the program 9 3 5 Time Shift setting Enable It is used to turn on or turn off the time shift function by using buttons ON To enable the Time Shift function OFF To disable the Time Shift function Time shift path Press OK button to select partition and press 7 Red button to save and exit or press Green button to make a new file in the partition that you choosed Time shift time Press or P button to select time 0 10H 0 30H 1 0H 1 30H 2 0H 2 3H 3 0H 4 0H 9 4 Preference 9 4 1 Language There are many languages available for the menu 1 Preference Af maa nm Da Language Menu Language English Control Audio Language English Time Setting Audio Priority Dolby A V Control EPG Language English UHF Setting Teletext Language English Miscellaneous Settings Subtitle Language English Subtitle Display Manual hai Retum 2 4 Exit sin l Enter Menu Language It is an item for changing the language of the Main menu Select the language that the menus will be shown in The supported language can be changed without any notice e Audio language It is an item for changing the language of the Audio
24. e Auto DiSEqC DISEqC A DISEqC B DISEqC C DISEqC D Scanning Satellite Test It is a very useful function to easy installing your system without knowledge of what kind of signal or LNB your receiver is connected to Press button it will automatically detect DiSEqC connecting and set the right configuration of LNB as well It will show you the connecting status you just need to press OK button to scan the services of connected satellites 9 2 2 Auto Installation Auto Installation is a very new and convenient function It will automatically detect all dishes connecting to this machine and scan the available services belonging to the satellite matched according to satellites and transponders data in current database You don t have to input any parameter of your antenna settings Just press OK button to enter this Auto 17 User manual Installation menu then it starts scanning and shows you the result at the end of scanning e Red Stop Stop the automatically checking LT Green Continue Continue the automatically checking I Yellow pause Pause the automatically checking 9 2 3 Guidance of installing a dish Refer to the Install your dish part of the chapter Easy Install in this manual 9 2 4 Factory Default v Factory Default F Prag csi naf omen Factory reset Set data to factory default data Delete all chan
25. e A v buttons to move and press OK button to confirm e Lock You can restrain and lock the services Mark the desired services using OK button use button to choose Lock mode and press OK button to confirm Delete You can delete the services Mark the desired services using OK button use gt button to choose Delete mode and press OK button to confirm Rename Mark the service you want to rename use gt button to select Rename item and press OK button to display keyboard and rename it After renaming it press Red button to save Skip User manual You can restrain and Skip hide the services Mark the desired services using OK button use button to choose Skip mode and press OK button to confirm Rea Group It is very useful to select services with different Groups LT Green Options It is very convenient function to Mark the desired services with different options Q Service Found It is an item to locate certain service by name quickly Press button to display the Find submenu use keyboard to enter service name and press button again to select the desired services Press 1 button to check the detail information if necessarily 1 info display Press 1 button to display the detail information about the selected service 9 1 2 Organizing favourites This menu is helpful in adding and deleting services
26. ecord NE ec ee Ne Ns i 20 9 3 5 TimeShift Setting RITTER 20 9 4 TN 20 9 4 1 Language innere eee 20 9 4 2 Parental sis aed a a 21 9 4 3 TIME Setting eR PER 21 9 4 4 PPE GL an ena RE EE EE 22 9 4 5 UHF SEttiNE cnn este 22 9 4 6 Miscellaneous Setting aaret bana ee 22 9 5 SAVAI AN nonas Do uisu uiu MIS LU IM NM EE OE DG SIS 22 9 5 1 System normal acoso net aac atte atte ee eee LUE ALS cu deep hu 22 9 5 2 Upgrade RS2 Lue 23 9 5 3 WU pe race tf HDD cae ea eame e sua AE 23 9 5 4 Backup to HP aec sas ac tM Sadat eet 23 9 5 5 CONTAC 24 9 6 Conditional Access Optional sv see eee Seines 24 9 6 1 Smart carde dieron e nmn SA eier 24 9 6 2 Common interface optional 24 9 7 ne TT PP 24 9 7 1 Net coll een 25 9 7 2 L n Settngsuasrvrsa REE 25 9 7 3 Net Wantialil parade EEE EE REE EE 25 9 8 CLTC H P 25 9 8 1 Sokobanii tr Reste
27. el G 7 tl CNAIPAL 8 tm CNAIPAL 1 743 Phoenix Ch No Event Name 4818 MB 2 Hour 59 Min 5 7 2007 06 58 15279 MB Free 74277 MB Q Sort Options EM Play List mau Return Edt Show PlayList o u A Recorded Services List You can see the file number file name date of recording information of scramble locking Service name event information file size HDD information etc i 7 Red Sort You can Sort the list by press 7 Red button ii LI Green Options 18 User manual It is very convenient function to Mark the desired services with different options ii Q Yellow Edit a A new folder can be made by select New folder item the keyboard will displayed input the name and press Red button to confirm b Select the files you want to move then select Move to folder item the list of Folders will appear You can select a folder you want c You can Rename the file or folder by select Rename item d Select Delete item after selecting the files or folders you want to delete You have to confirm it at Confirm box e Select Lock item after selecting the files or folders you want to restrain or lock iv HE Blue Add Play List Mark the desired recorded services by press OK button add to the current play list using Blue button v aS PIX White Show Play List To show the Play List by using Ye White button vi Pl
28. g gt or OK buttons select one among 1X 1D 1W 1 5 and 6 7 Timer Mode Select a Timer Mode among VCR and Service Change B In the timer list menu you can Using Red or I Green buttons to Delete or Modify the entries of Timer selected by pressing OK button C In the timer list you can Using P P buttons to up or down pages if the Detail Information more than one page Q button Locate certain service by name quickly 1 button Display detail information of current service channel name satellite amp transponder provider name and CAS name etc V P P buttons Browse the list then press OK button to switch the viewing service to the highlight one button change list from TV services to Radio services or verse 0 9 buttons Switch to the certain service directly 10 3 Information Box Press 1 button on the RCU or change services to see the program and EPG information The Information Box displays as follows 0100 CANAL FILM HD 4 15 35 18 00 4 Anna I kr l 18 00 18 30 Rockefeller Plaza 30 2 e Service Number e Service Name e Service Type TV or Radio e Current Group e Current Time and Date e Current and Next Event Name e Signal Level and Signal Quality Bar e Subtitle Teletext EPG Multifeed Audio Scrambling Service Symbol These are automatically displayed when the broadcasting station provides appropriate infor
29. g Language Choose Menu Language Go to next Time Setting Set Current Date and Time Go to next Parental Control Set Password Receiver Lock and Censorship Classification Go to next to enter in Install Setting 8 3 Install Setting Choose one from the following items Install your dish Automatic install satellite and search channel and Manually install satellite and search channel Install your dish Install one satellite Press button Red to edit it It will automatically calculate the elevation and azimuth for certain satellite according to the local longitude and latitude you entered Set the longitude and latitude by pressing 0 9 and lt gt buttons and you get the elevation and azimuth information from the menu Then go to next Adjust your dish depend on the intensity and quality Press E button Red to edit satellite as above press OK button to select TP Then go to next Adjust your dish depend on the SNR and BER Press button Red to edit satellite as above press OK button to select TP Then go to next Choose one from the following items Install another satellite and Complete installing dish and search channels For Install another satellite you need to install another satellite as the above step by step For Complete installing dish and search channels you need to set the Scan Mode and Network then press button to do
30. h the PIN code system The default PIN code is 0000 Censorship Classification This item blocks programs according to each specific setting Use OK button to select items below View All Access to everyone Lock All Access to no one without PIN code 7 18 Inaccessible for viewers within each minimum age limit if a maturing rating of the event is same or lower than the age limit In case of inaccessible the PVR asks the PIN Code and check the age limit e Allow Time Control This item blocks programs according to each specific setting Disable Access for all the time Enable Access for specific allow time period In case of out the allow time period the PVR asks the PIN Code Change Password Go to the Change Password item to configure new PIN Code Enter the PIN code by using the numeric buttons on your RCU 9 4 3 Time setting b Preference EEE Language Automatic Update ON Parental Control Current Date 2007 07 07 Time Setting Current Time 07 13 jo AN Control GMT Offset GMT UHF Setting Daylight Time OFF Miscellaneous Settings Wake Up Disable Wake Up Time Sleep Disable Sleep Time Return 45 4 Exit The exact local current time can be adjusted by using the Automatic Update the GMT Offset and the Daylight Time sub menus e Automatic Update By using OK button you can select ON OFF When the Automatic Update is set to ON it updates the time settings
31. ience receptacles and the point where they exit from the unit Object and Liquid Entry Never put objects of any kind into this STB through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill any liquid on the STB Note Moisture may be formed on the lens In the following conditions e when the unit is suddenly moved from a cold environment or an air condition room to a warm place e immediately after a heater has been turned on e in a steamy or very humid room If the moisture forms inside the unit it may not operate properly To correct this problem turn on the power and wait about two hours for the moisture to evaporate Parts Replacement When the unit parts need to be replaced user should make sure the service technician use the replacement parts specified by the manufacturer or having the same characteristics as the original part Unauthorized replacement may put the unit In the risk of fire electric shock or other hazards Safety Check After all the maintenances and repairs are done user is required to request the service technician to conduct the overall safety check to ensure the machine is In the proper condition User manual 2 Environment protection X Attention Your product Is marked with this symbol It means that used electrical and electronic products should not be mixed with general household waste There is a separ
32. is different from others You cannot use the Time shift Recording and playback functions with an unformatted HDD A Format Disk we RW MER 0 m Local Disk D 8 Mobile Disk E D File System EXT2 _ Avallable Space 14 861GB C Spent Space 57 67368 RAM disk does not support formatting or Partition manage Format Disk lt Partition Mana Return Exit 425 Enter A Red Format Disk Select the desired Disk to Format in Disk list and press Red button select Format Type FAT32 or EXT2 in the pop menu then confirm format by select YES item B I Green Partition Manage To enter the Partition Manage submenu Press Ij Green button in this menu and select the HDD Local Disk or Mobile Disk by press OK button Format Disk Partition Manage td Drive letter 4 IG gt m Sizo 29 773GB Type FAT 32 IE IF IG 24414GB FAT3 24414GB FAT3 29 773GB FAT32 14 550GB The maximum number of partitions that can be created is 8 Start C Add _ jDelete l Press I Green button to Add a partition Move the highlight to Size item using or Numeric buttons to change the size of the partition You can select Type FAT32 or EXT2 of the partition on Type item The maximum number of partitions that can be created is 8 gt ll Press LL Yellow button to Delete the selected partition When completed above settings it should b
33. l AsiaSat 35 105 5E 03760 H 105 6E 46 7N Satellite Select a satellite that will be used to identify a motor position TP Select the transponder to catch the strong signal Longitude it means the longitude of your location You can use numeric keys of RCU to enter the angle East or West will be selected by buttons My Latitude it means the latitude of your location You can use numeric keys of RCU to enter the angle South or North will be selected by 4 buttons Goto Reference to go to reference position Move after setting the Longitude the Latitude of the location press OK button the dish will move to the desired position automatically Store to store the current position of the dish Red Scan To go to Scan menu directly from this menu HE Blue Auto DiSEqC Refer to the Auto DiSEqC in the following c Red Scan To go to Scan menu directly from this menu e To add a new to the TP list of the selected satellite e I Yellow Edit To edit the parameters Frequency Symbol rate and FEC of selected TP Polarization e EB Blue Delete To delete the TPs selected using add ok key icon button e 1 Service Press 1 button to display the detail information about the selected TP all services belonged to the TP will displayed in the list D HHH Blu
34. lay List Show the Play List by press I White button 10 15 Slow Motion Playback To playback in slow motion press the 4 1 button Press gt button to resume playback with normal speed The slow motion function is available for the playback and the time shift playback 10 16 Fast Motion Playback e _ Ifthere is a Time Shift or Playback Press 4 or bb button for fast motion playback To change the playback speed press td or button repeatedly there 7 steps 2 4 8 16 32 64 128 in fast motion playback Press gt button to resume playback with normal speed 10 17 MP3 Player Press O button to display the recorded services list Press 4 gt buttons to go to MP3 list The useful editing function please refer to above Playback a Recorded Service Select one or more files by press button in the list Press gt button to start MP3 Player or press OK button on MP3 Player in the PVR menu 2007 1 MP3 04 23 Back Al One mp3 03 41 GXDYFJ MP3 04 34 sealed with kiss mp 02 56 stronger mp3 03 22 the day mp3 03 41 yesterday once more 03 58 zhangyong01 mp3 03 43 zhangyong02 mp3 03 38 2007 1 MP3 04 23 Back Al One mp3 0341 GXDYF J MP3 04 34 Service Delete Move Open Play List Save Play List Add Switch to Jpeg Press 1 button to display Help Information A PIP Display the video in sub picture by press Red bu
35. mation e Parental Lock e FAV Symbol e HD Symbol If you press 1 button to enter this Information Box Press Red button to choose the group to view service Complete Satellite Favorite Provider CAS and HD User manual Press Au Green button to check EPG detail information page by page Press LL Yellow button to enable the Property menu to set current service s FAV Lock or Skip state delete rename current service Press 1 button to check service s detail information Transponder Provider name CAS name etc 10 4 Changing Services To change services there are 4 sets of buttons available e Press the 0 9 buttons to input certain service No directly e Press ned v button to browse service one by one e Press the 2 2 button to switch between TV and Radio services e Press the button to select the previous viewed service 10 5 Volume Control To adjust the volume level use the button or p button To temporarily stop the volume press the IKA button To cancel mute press the IX button again or press the buttons 10 6 Sound track amp Multifeed Audio Press d button to enter Audio menu You can choose a language of soundtrack by when the broadcaster supports various languages of audio And also for multifeed available services it is possible to choose one of the multilingual audio too At Soundtrack item use amp gt or OK
36. n Options It is very convenient function to Mark the desired services with different options ii Q Yellow Edit a Anew folder can be made by select New folder item the keyboard will displayed input the name and press Red button to confirm b Select the files you want to move then select Move to folder item the list of Folders will appear You can select a folder you want c You can Rename the file or folder by select Rename item d Select Delete item after selecting the files or folders you want to delete You have to confirm it at Confirm box iv Play To play the selected file press gt button Press OK button to select the files among the Image list and press b button to play the multi files in sequence automatically D Software File List The file list of Software can be selected by gt buttons from other list E Others Can display all folders and all files of the selected folder or disk 9 3 2 MP3 Player You can start the MP3 Player by pressing the OK button on this item if the Player is already used before If you first time to use please refer to the MP3 File List Play in this manual 9 3 3 HDD Format You can Format Disk or Partition Disk in this menu Formatting Hard Disk will delete all the data and the User manual files recorded in HDD permanently If a new HDD is installed it should be formatted because the file structure of PVR
37. n the HD Receiver has to be upgraded to enjoy better function There are some methods to download the new software Receiver to Receiver upgrade via RS232 It is possible to upgrade the software or service data from Receiver to another Receiver e PCto HD Receiver upgrade via RS232 You need the PC upgrade tool AVUpgrade ST7100 exe to upgrade the software Start upgrade at PC and turn on the HD Receiver Internet You can upgrade the software from network via LAN port USB Hard Disk You can upgrade the software from USB hard disk For more information refer to the chapter System Upgrade in this manual 34 User manual 12 Trouble Shooting Problem About HD Receiver No display VFD on the front panel No power supply Poor picture quality Remote Control does not operate No or Bad Signal No Signal Solution Check the main power cable and check that it is plugged into a suitable power outlet Check whether HD Receiver is in Standby mode Ensure that the HD Receiver is switched on Check the video output port SCART is firmly connected to the TV or VCR Check that you have selected the correct channel or Video on your TV Check the brightness level of the TV See No Picture above Check the signal level if this is low then try adjusting the alignment of your dish Point remote control directly towards the receiver Check and replace batteries Check that nothi
38. nel Factory default It is an item to load the default data to current database by press OK button Factory reset Press OK button it will recover all database to the same as factory default settings then it will automatically go to Easy Install menu to re install your system Set data to factory default data Press OK button to set current data as default data Delete all channel To delete all channels by using OK button 9 3 PVR optional only for PVR ready receivers Abut nn ln MP3 Player a HOD Format Record Setting eae Recording List TimeShift Setting al 9 3 1 File List Press OK button on this item to enter the File List menu EEE ENES e Record Path Press 7 Red button to change the Record Path select the path and press Red button again to confirm e TimeShift Time Press LI Green button to select TimeShift Time item use gt buttons to select the length of Time Shift time among 0 10H 0 30H 1 0H 1 30H 2 0H 2 30H 3 0H and 4 0H Select a disk and press OK button to enter the file list submenu The file list has 5 lists They are Recorded Services MP3 4 Software and Others The lists are select by buttons The File List is displayed by pressing F button 1 MOVIES 2 SPORTS 3 dm 743 Phoenix Ch_1 EE 4 m TV 5 tml TV 1 6 te Chann
39. ng blocks the front panel Check the LNB replace LNB if necessary Check the cable from the LNB Check the position of the dish realign dish if necessary If you are using a DiSEqC 1 0 check that you have connected the LNBs to the correct connections on the switch Check the Signal Level and Signal Quality See No or Bad Signal above DiSEqC 1 0 Check that you have connected the LNBs to correct connections on the switch Check that you have set the connected Setting in the Installation menu DiSEqC 1 2 Check that you have selected this in the Installation menu Check that the dish is aimed at the correct satellite 35 User manual 13 Specifications SYSTEM RESOURCES 400 MIPS based CPU 8Mbytes 1024 512Mbits Main Processor Flash Memory DDR SDRAM TUNER CHANNEL Input Connector F type Connector Female Loop Through F type Connector Female 65 to 25 dBm Vertical 13V 14V Signal Level LNB Power amp Horizontal 18V 19V Polarization Current Max 500mA Overload Protection 22KHz Tone Frequency 22 1KHz Amplitude 0 6 0 2V Version 1 0 1 1 1 2 USALS Available QPSK 8PSK 2 45 Mbps Convolution Code Rate 1 2 2 3 3 4 5 6 7 8 and Auto DiSEqc Control Demodulation Input Symbol Rate POWER SUPPLY Input Voltage Free Voltage 100 250V AC 50 60Hz 40W MAX Power Consumption MPEG TS A V Decoding MPEG 2 H 264 Max 120Mbit s 4 3 16 9 Letter Box
40. nge the duration of the recording time press gt or numeric buttons B Power Off After Record Power off the PVR after recording stopped C Record Pause To pause recording select YES To restart recording select NO Stop record Press button and select the service to stop the Recording by press OK button 10 13 Recording by EPG optional only for PVR Ready receivers Press EPG button to display EPG Sel a service that you want to record and press I Yellow button to enter Timer Configuration menu For more information please refer to EPG Timer in this manual 10 14 Playback a Recorded Service optional only for PVR Ready receivers 2 2 Y File List Recorded Services iJ MOVIES 4 SPORTS fi 743 Phoenix Ch 1 m AZIO_TV lud AZIO TV 1 Channel G CNAI PAL 8 CNAI PAL_1 743 Phoenix Ch No Event Name 4818 MB 2 Hour 59 Min 6 7 2007 06 58 15279 MB Free 74277 MB EE EZER Q Sot J Options Edit Q Add Play List Retum Exit _JShow Playlist Lols u Press O button to display the recorded service list You can use several useful editing function at Recorded Services as followings A New folder press I Yellow button select New folder to make new folder B CopyaPress I Yellow button select Copy to copy the document to other logic disk C Cut Press Bd Yellow button select Cut to remove the document to other logic
41. nglish AslaSat 38 3760 26000 H b MT 1 0041 STAR New 08 00 09 00 STAR NEWS INDIA B 0042 STAR Movi 06 05 08 20 Hidalgo 0043 DW TV m 08 00 08 30 Journal english B 0044 STAR 0045 STAR Worl 08 00 08 30 That 70s Show Group J Options J Timer uuu Return 2 4 Exit Red Group It is very convenient to select the services by different Groups using Red button Green Options You can select display mode of the EPG among Now Next More Schedule and Genre Now The menu displays as the following e Service list Group information e Current event name duration progress bar DETAIL icon if detail event information is available e Small video window Next The menu displays as the following e Service list Group information e Next event name duration DETAIL icon if detail event information is available e Small video window e 1 button view event detail information if it has a DETAIL icon More The menu displays as the following e Service list Group information e Time bar with 1 hour as step e Event name duration DETAIL icon if detail event information is available button switch the event information of current service if any or skip the time with step of User manual 1 hours if there is no event information of current service 1 button view event detail information if it has a DETAIL icon Schedule The menu displays as the following e C
42. nnecting to the server When connected to the server the available file list will displayed like the following picture you can see the information about the software files like state version type date Then you can choose the file which you need pressing button to upgrade the software Press LI Green button to disconnect from the server Press Yellow button to display the detail information about the software files 9 8 Game In this menu we provide four interesting games for you to enjoy please choose one and according the indicate information to play it 9 8 1 Sokoban User manual 9 8 2 Tetris 0 Highest Score 9 8 3 Landmine 9 8 4 Speed 26 User manual 10 Function guide 10 1 Ok list TV a n 0091 m 0092 D j Al 0093 IE evil V 0094 DV I 0095 li 5 E 0096 Hebel TV Viewing 0097 ESP HD Intl 0097 ESP HO Intl HD Unknown 0098 NATIONAL GEOH HD se 0099 CANAL SPORTH Satellite Test 4192 6000 V 0100 CANAL FILMHO HO 187 ow o 8 8 0 099 Press OK to see the OK List The OK List consists of services belonging to current group with small video window and associated information service name TP satellite scrambled symbol HD sambol current next EPG overview information if any in the middle right of the menu By using some buttons in the service list you can use
43. nnels coded in this system This menu shows detailed information about cord inserted into cord reader module It allows inserted according to help messages visible on the bottom of the screen 24 All information showed in this menu and submenu are coming from inserted card In case if anything is wrong it could be card problem After inserting the card correctly at any time a message box will show on the screen with message about detecting the card in card info menu all available information will be displayed Card info enable It is used to turn on or turn off the card info display function by using buttons or OK button to select ON To display the card info OFF Don t display the card info 9 6 2 Common interface optional We provide two Cl slots for user to use Using different CAM amp cards provided by different CAS operator user can view many type or scrambled channels L eo Slot 2 module uninstall Cl info Enable ON me We provide this menu to display the detail information of the CAM amp cards inserted in the slots User can check all this information according to the help message at the bottom of each menu Note All information showed in this menu and submenu is abstract from CAM amp card In case something is wrong it may be the problem of CAM or card When you insert the CAM correctly at any time a message will show in the screen to tell
44. of DiSEqC switch box or antenna Power Select the LNB voltage among 13 18 13 18 13 5 18 5 13 5 18 5 and OFF by using OK button or lt buttons Red Scan To go to Scan menu directly from this menu press button at this menu LI Green Rename Change the satellite name using keyboard popped on the screen then press button to Confirm it gt e T I vellow Motor If you have DiSEqC 1 2 or USALS motorized system then you can use their functions by press LT button yellow _ DISEqC 1 2 9 Manual Installation Edit Satellite Motor fer Typo 4 OGEQC12 gt Satellite AsiaSat 3S 105 5E P TP 03760 H Move Continue Stop Move Step Stop mm Store Position OK Sel Lima Disable Goto Reference OK 12v ON 22kHz OFF 142 DISEqC Motor ON on Satellite Select a satellite that will be used to identify a motor position TP Select the transponder to catch the strong signal Move Continue To adjust the position of the antenna using East West command by press buttons Move Step To adjust the position step by step using East West command by press buttons Store Position To store the current position of the motor for the selected satellite Set Limit Set the limits of East West position Goto Reference To go to reference position Red Scan To go to Scan menu directly from this menu User manua
45. on To goto the live video press button Pause the video press i i button press EXIT button or gt button to quit pausing To add a bookmark press Bookmark I Green button at the position you want to add it Press Go to bookmark EE Yellow button to jump to the next bookmark Then the PVR plays from the book marked position remove a bookmark you have to display the progress bar by pressing button Select the gt bookmarked position by Go to bookmark I Yellow button and press bookmark Green button 10 11 Recording Edit the reserved delayed Recording optional only for PVR Ready receivers To record services refer to the following steps there are three kinds of recording references You can record maximum 2 services at the same time i 00 00 19 02 00 Se 02 PHOENIX INF Ee 00 00 12 02 00 10 12 immediate Recording by RECORD button optional only for PVR Ready receivers Recording Press button to record the service you are watching To specify the stop time go to Record Edit window and modify Duration item To go to the Record Edit window press p i White button or go to the record list in main menu Record Edit To see Record Edit menu press Yo White button and than press OK button or go to the record list in main menu You can modify the parameters of the recording User manual A Duration To cha
46. onent video output socket for the television set 11 User manual 7 Connecting There are four ways to connect the receiver to your existing TV system We recommend using one of the following cases for the best result 1 If you have a high definition television set you should use a HDMI cable for best result Plug one end of the cable into the HDMI socket on the receiver and the other end into the matching socket on your television In this case you do not have to make audio connections because the HDMI connector can output stereo audio or Dolby digital audio 2 Connect one end of SCART cable to the TV SCART jack on the back of the receiver and the other end to a SCART jack on your TV 3 Connect one end of RCA cable to the RCA jack on the back of the receiver and the other end to a RCA jack on your TV 4 You will need to obtain a component video Cable RCA cable to use the component video connector Plug one end of the Cables into the Y Green Pb Blue and Pr Red Sockets on the digital receiver and the other end into the matching sockets on your television Finally connect the coaxial cable from the LNB to the LNB IN jack on the receiver Connecting with external audio Hi Fi system To connect any external Audio Hi Fi system the receiver has been provided with two RCA connectors at the back of the receiver marked with Audio L and R Connect an RCA stereo cable from the AUDIO L R jacks on the back of the receiver
47. please button gt This function is available only the MP3 Player and the JPEG Player played at the same time B Press ay Pid White button to change the type of circulation Rotate the picture please press EI bh buttons D Press OK button to zoom the picture zoom 1x zoom 4x zoom 9x zoom 16x Press i i button to pause the JPEG play Press button to exit the JPEG player 10 19 Picture In Picture PIP Press Red button to display PIP Press Red button repeatedly to change the size of sub picture or to remove the sub picture At PIP screen press button Red to exchange main picture with sub picture Press lt gt button to move the position of sub picture To display the service list of sub picture press Blue button 10 20 Multi Picture Display 43 DW TV A 46 STAR UTSAV BE 47 Horizon 48 Hubeli 49 Tianjin TV 50 SHANXI SAT TV 1 SUNTV CH1 Press button Blue to display Multi Picture There are 4 modes 4 Picture 9 Picture 13 Picture 16 Picture to be selected Press EXIT button to resume displayed with the normal mode 33 User manual 11 Software Upgrade The HD Receiver has stable and convenience software to use But to improve the HD Receiver the new software of the HD Receiver may be released Whenever a problem is found or functions are added or modified the software i
48. rvice up or down through the available EE Adjust the volume Decrease Increase en Display Service List on screen Select an item in the menu RECALL O Select the previously viewed service Optional only for PVR Ready receivers To start the recording User manual Optional only for PVR Ready receivers Display the progress bar of time shift or playback when no progress bar is displayed Start playback with normal speed Return to normal speed from trick mode Optional only for PVR Ready receivers Stop time shift playback or recording Stop the MP3 or JPEG player n Pause the playback and live picture Optional only for PVR Ready receivers Start slow motion playback Optional only for PVR Ready receivers Fast rewind when the progress bar is Optional only for PVR Ready receivers Start fast forward or fast motion playback Change the speed of forward playback Move up or down pages on the menus or service list Optional only for PVR Ready receivers Move the position of Sub picture at the PIP by counter clockwise displayed Start reverse playback Change the speed of reverse playback Button Optional only for PVR Ready receivers Move the position of Sub picture at the PIP by clockwise Exchange main picture with sub picture at the PIP Exchange Player with JPEG Player Select the play mode in MP3 or JPEG player Biaty a en To remove the USB Hard Disk safely Select
49. supply only of the type described in the operating instructions or as marked on the unit If you are not sure of the type of power supply for example 120 or 230 V to your home consult your local dealer or local power company WARNING This product install diodes Do not open the cabinet or touch any parts in the inner mechanism Consult your local dealer for technical service if the opening is required Note To ensure proper use of this product please read this User manual carefully and retain for further reference Note This product install diodes Do not open the cabinet to avoid the unit direct exposure to radiation Unit Cleaning After the unit power is turned off you can clean the cabinet panel and remote control with a soft cloth lightly moistened with a mild detergent solution User manual EEE Attachments Never add any attachments and or equipment without the manufacturer consent as such additions may result in the risk of fire electric shock or other personal injury Locating Slots and openings in the cabinet are provided for ventilation to protect it from overheating Do not block these openings or allow them to be blocked by placing the STB on a bed sofa or other similar surface nor should it be placed over a radiator or heat register Power Cord Protection Place the power supply cord out of the way where it will not be walked on Please take special attentions to cords at plugs conven
50. t background by press Red button or as Radio background by press Green button press Yellow button to load the default picture To resume the video press gt button 10 9 Zoom To zoom the live video press N button There are four modes Zoom 1X Zoom 4X Zoom 9X and Zoom 16X You can switch the modes by pressing button one by one times and using A v 4 buttons to change the view area 10 10 Time Shift optional only for PVR ready receivers 00 19 43 19 43 f HOV PN I v m ER ay ime Ab N N To use Time Shift function the Time Shift option should be enable To find the Time Shift option menu follow the steps below Main Menu gt PVR gt Time Shift Enable gt ON User manual Press button to display Time Shift progress bar You have to press P button once more to display Time Shift progress bar during Trick mode such as Fast Forward Reverse Playback Slow motion To go to the desired playback position press or pe button the PVR plays every 20 seconds by pressing td or gt gt button This function is valid while the Time Shift progress bar is long displayed When the time shift progress bar is small displayed you can use d or button to decelerate or quicken up playing 2 4 8 16 32 64 128 2 4 8 16 32 64 128 than normal To remove the Time Shift progress bar at once press EXIT or be butt
51. to and from the favorite group Organizing Favourites _ 0031 Indus Music 0001 Filmazia 0032 Channel G 0002 TV5 0033 Indus Vision 0003 Eurosport 0034 Muslim TV1 0035 Muslim TV2 0036 Al Jazeera Int 0037 Filmazia 0038 TV5 0039 Eurosport 0040 OW TV e FAV List To choose the FAV List by press FAV button e Add To add services into favorites Mark the desired services by press OK button in Service List press to choose Add mode and press OK button Remove To remove services from favorites Mark the desired services by press OK button in Favorite List press to choose Remove mode and press OK button Move You can reorder and move the service to the preferred position in Favorite List Rename Select the desired FAV List by press FAV button using gt buttons to choose Rename mode and press button to display keyboard and rename it After renaming it press Red button to save Group Options Service Found and Detail Information display Please refer to the Organizing Services part in this manual 9 2 Installation Manuallinstailalion Auto Installation OK Guidence of installing a dish OK Factory Default OK 9 2 1 Manual installation 2 Manual Installation Main Tuner 1 01 Arab 2A 26 0E p 02 NiteSat_101 7 0W n 03 Holbird 13 0E 04 AsiaSat 35 105 5E 05 Astra 1C 19 2E LNB C B
52. to the LINE AUX SPARE OR EXTRA input jacks on your Hi Fi System 12 User manual Connecting with Motorized System DiSEqC 1 2 Connect one end of your coaxial cable to the LNB IN connector on the receiver and the other end to the REC or Receiver connector on the DISEqC 1 2 motor Connect the coaxial cable from the LNB to the LNB connector on the DiSEqC 1 2 motor All our receivers are designed to be DiSEqC 1 0 and DiSEqC 1 2 compatible This allows multiple antennas to be connected to the receiver at the same time If you have two or more fixed antennas or LNBs then we recommend you use a DiSEqC 1 0 switch Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch Do the same for any other LNBs that you have Connect one end of a coaxial cable to the RF output connector of the DiSEqC switch connect the other end to the LNB IN Socket on the receiver To the digital receiver you can connect either a single satellite antenna directly or LNB of multi feed equipment 13 User manual 8 Getting started 8 1 Easy install Press the 0 button to operate the receiver from Standby mode If you did not install it before the Easy Install Menu will be displayed automatically to guide you to install your box and dish Notice There are two parts Box Setting and Install Setting Please follow the indication in this menu one step by one 8 2 Box Settin
53. tton B Service You can press I Green button to change the service of sub picture C Move You can move selected songs to the desired position by using HE Blue button and A v buttons D Delete To delete the selected songs by pressing I Yellow button E Save Play List To save the current list by press FAV button You can edit the Path the File Name and press Red button to save F Open Play List Open the Play List saved before by using SAT button G Add You can Add the selected songs into current play list by using EPG button H Switch to Jpeg Switch to JPEG Player please button gt This function is available only the MP3 Player and the JPEG Player played at the same time Press ay Pid White button to change the type of circulation Press i i button to pause the MP3 play Press button to exit the MP3 player User manual 10 18 JPEG Player Press O button to display the recorded services list Press 4 gt buttons to go to Image list The useful editing function please refer to above Playback a Recorded Service Select one or more Image files by press OK button in the list Press gt button to start JPEG Player add player picture PIP Display the video in sub picture by press LS Red button add player picture Press 1 button to display Help Information A Switch to MP3 Switch to MP3 Player
54. urrent service name Group information e Day bar for whole week current day information e Event name duration DETAIL icon if detail event information is available HE button Blue select new service belonging to current group 4 be button switch current day of one week 1 button view event detail information if it has a DETAIL icon Genre The menu displays as the following e Current service name Group information e Day bar for whole week current day information e Event name duration DETAIL icon if detail event information is available HE button Blue select new genre 4 button switch current day of one week 1 button view event detail information if it has a DETAIL icon I Yellow Timer A To insert new entry of Timer Setting press I Yellow button Select a mode among Timer list and HDD Recorder using v buttons then press button to enter the timer list gt In the timer list menu you can press I Yellow button enter the timer configuration menu Service Name Select the service to be reserved for recording by pressing OK button Event Name display the Event Name if it is available on the program Start Time Select the start time 4 buttons and numeric buttons are available consisted of date and time Stop Time Select the stop time 4 buttons and numeric buttons are available Consisted of date and time Repeat By usin
55. you that which CAM has been detected by the receiver and is available now Cl Info Enable It is used to turn on or turn off the ci info display function by using lt q buttons or OK button to select ON To display the ci info OFF Don t display the ci info 9 7 Internet optional You can get a new software from the network via LAN port Select the Main Menu gt Internet menu You should see a screen like the following figure User manual DE Gent mmm Net Manual Upgrade Lan Settings In this menu you should assign the Server IP or set the DNS Enable On by press OK button and maybe you need assign the Serial Num Of the receiver by press button to confirm This above information you can get it from your dealer 9 7 2 Lan Settings IP Address 192168 3 139 Subnet Mas 255 255 255 0 DHCP Enable NotworkG 192168 3 1 X Enable Notw DNS IP 92168 3 1 Mac Addres 00 11 22 49 94 F4 In this menu you may assign a dynamic IP address to the digital receiver To do so select the DHCP Enable If you have a static IP address unselect the DHCP Enable then the IP Address Subnet Mask and Network Gateway options become enabled You have to set these options according to your IP address Press Red button to Store the modification Press LI Green to Recover the parameters 9 7 3 Net Manual Upgrade In this menu press Red button to co

User manual - DMTrade.pl

Contents

Download Pdf Manuals

Related Search

Related Contents