User Guide - Sonic Alert
Contents
1. to purchase a connector if your cellular telephone does not have a suitable 2 5mm headset socket Its is important that you read the instructions below in order to use your Geemarc t LOOP to its full potential Keep this user guide in a safe place for future reference Unpacking the Geemarc t LOOP When unpacking the Geemarc t LOOP you should find the follow ing in the box e 1 Neckloop and neckloop unit e 2 5mm telephone connector plug e 2AAA1 5V alkaline batteries e 2 5mm to 3 5mm adapter e 1 User Guide Setting Up NOTE Ensure your telephone equipment is UL ETL approved before connecting the Geemarc t LOOP Please refer to your tele phone user guide Open the battery compartment found on the back of the Geemarc t LOOP Insert the 2 supplied alkaline batteries AAA size 1 5V type into the battery compartment Check the battery polarity diagrams in the battery compartment when inserting the batteries Replace the battery cover Note The Geemarc t LOOP must not be connected to the telephone when installing the batteries Do not use rechargeable batteries Do not put batteries into the household rubbish pay attention to battery regulations regarding battery disposal Low Batteries The low battery indicator will turn red to indicate the batteries should be changed The indicator will only turn red while in use Replace the batteries as soon as possible Making and Receiving Calls Place the wi2. accidents negligence or breakage to any parts This includes shipping damage failure to follow instruc tions misuse fire floods use of incompatible accessories Acts of God or failure in your device service carrier s line service The product must not be tampered with or taken apart by anyone who is not an authorized Sonic Alert representative Tampering with the phone will void ant written or implied warranties Sonic Alert shall not be responsible for loss of time inconvenience property damage caused by your device or any other accidental or consequential damages Warranty service is available only with proof of purchase 10 IMPORTANT UPOUR RECEIPT IS PART OF YOUR WARRANTY AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF WARRANTY CLAIM Simply send the Geemarc t LOOP postpaid and a copy of your sales slip as proof of purchase to Sonic Alert Inc 1050 Maple Road Troy 48083 SonicAlert 1050 East Maple Rd Troy MI 48083 Ph 248577 5400 Fax 248 577 5433 www sonicalert com Ug_t LOOP_En_Ed03 11
3. ide Environmental Do not expose to direct sunlight Always ensure there is a free flow of air over the surfaces of the Geemarc t LOOP Do not place any part of your product in water and do not use it in damp or humid conditions e g bathrooms Do not expose your product to fire or other hazardous conditions the Geemarc t LOOP is not in use do not store it with batteries installed for an extended length of time Avoid using the telephone during electrical storms as there is a remote risk of receiving an electric shock from lightning If you suspect a gas leak in the area do not use the telephone The phone s electrical contacts could create a spark which could ignite leaking gas Sonic Alert warrants the device against any defect in materials or workmanship for the period of one year from the date of purchase Should you experience a problem contact our customer service department Be sure to save your sales receipt as proof of purchase date should you need warranty service Within a period of one year from purchase date Sonic Alert will repair or replace our discretion your device at no cost if a defect in materials or workmanship is found If we elect to replace your device we may replace it with a new or reconditioned product of the same or similar design Repair or replacement will be warranted for a period of 90 days or the original time on the original warranty whichever is longer The warranty does not cover
4. io jack e g a CD player MP3 or any device that has an 8 16 Ohm audio output through a 3 5mm jack Note Only use the adapter supplied when connnecting the Gee marc t LOOP to an audio device The Geemarc t LOOP is compatible with cell phones that provide stereo music In order for the Geemarc t LOOP to work you must use an adapter that converts the 2 5mm connector on the cell phone to function as standard mono connector You can get these adapters from your cell phone manufacturer You will need to need to check that the 2 5mm connector on the cell phone will work with a standard mono hands free headset such as the Geemarc t LOOP The LED is Red e Change the batteries There is no sound from my Geemarc t LOOP Ensure the headset is securely plugged in Ensure the volume is correctly adjusted Ensure the batteries are not flat Ensure the batteries are inserted correctly Ensure the Geemarc t LOOP is switched on Ensure the telephone is switched on There is a weak sound from my Geemarc t LOOP The batteries may be running out e Turn up the volume on the Geemarc t LOOP e Turn up the volume on the telephone e Check your hearing aid General Do not open the unit Contact the helpline for all repairs Avoid dropping the unit Keep the Geemarc t LOOP out of small children s reach Cleaning Clean the Geemarc t LOOP with a soft cloth Never use polishes or cleaning agents they could damage the finish or the electrics ins
5. re around your neck Insert the round connector plug into the Neckloop Quick Disconnect plug this forms a loop around your neck Ensure you have double clicked the connection Connect the 2 5mm plug of the Geemarc t LOOP into the telephone s 2 5 mm headset jack Switch your hearing aid to T or MT mode Press the ON OFF button you are ready to speak through your Geemarc t LOOP The green light will turn on Make and receive calls as normal refer to telephone user guide The volume of the Geemarc t LOOP can be adjusted by using the volume control knob found on the bottom of the Geemarc t LOOP This gives up to 30 dB gain Press the ON OFF button when the call is finished The green light will turn off Reset your hearing aid if necessary Do not forget to turn OFF your Geemarc t LOOP at the end of the call Failure to do this will drain the batteries after about 30 hours Note The Geemarc t LOOP has a built in microphone hence you do not need to hold the telephone to your ear Instead you can use it with a belt clip or place it on a flat surface such as a table If your telephone does not have a 2 5mm jack you may need an adapter Check with the telephone manufacturer Using as Personal Audio Neckloo The Geemarc t LOOP can be converted easily to a 3 5mm amplified Audio Neckloop Simply plug the 2 5mm end of Geemarc t LOOP into the 2 5mm to 3 5mm adapter provided then insert the adapter into your device with a 3 5mm aud
6. seuel Joueds3 CONTENTS INTRODUCTION Unpacking the t LOOP INSTALLATION Setting Up Low Batteries USING THE t LOOP TROUBLESHOOTING SAFETY INFORMATION GUARANTEE RECYCLING DIRECTIVES 10 Congratulations on purchasing your Geemarc t LOOP amplified powered neckloop from Sound SolutionsTM The Geemarc t LOOP can be used with cellular or landline telephones together with a hearing aid that has a t coil The Geemarc t LOOP can also be used as an amplified audio neckloop for a variety of audio devices using the 2 5mm to 3 5mm adapter provided This neckloop uses an induction loop system which helps people who use a hearing aid to hear sounds more clearly because it reduces or cuts out background noise The Geemarc t LOOP transforms the sound emitted by an telephone audio device into an acoustic field compatible with hearing aids set to the T position Simply plug the neckloop into your telephone and you can make and receive calls as normal without needing to hold the telephone The microphone in the Geemarc t LOOP allows you to speak directly to the caller Note users of digital hearing aids must make sure their aids have been programmed for use with the T setting This neckloop can be used with telephones equipped with a 2 5mm microphone headset socket Geemarc products such as AMPLI Dect CL200 400 600 1400 are good examples It is also com patible with most mobile telephones you may need
Download Pdf Manuals
Related Search