Home

AVerVision W30 - TBI

1. 2 Re 2 2 Panel een 3 LED LO Me 3 gt ____ EE 4 IC A RE TER 4 Rion Panal ssrin 5 lM er 5 Seite Eu 6 Remote Control 7 Making the Connection 10 Set the TV RGB Switch 10 Connect to a Monitor or LCD DLP 10 Connect to a Monitor or LCD DLP Projector with DVI I interface 11 COMMS a ENE EP e EN 11 Connecting the Power a ersen nennen nnns 12 Connect to a nnns 12 Connect to a Computer via 058 13 Connect to a 14 Setting Up and Operating W30 15 Unfolding the W30 15 Orient the W30 base Antenna 15 W30 Camera Operating Height amp 16 mec ee ee ene eee eee 16 l frared SONS Ol RIETI TR 17 External Memory 17 Insert an SD edu leeren 17 Insert a USB Flash
2. TV 7j 2 Connect the USB flash drive in the USB slot W30 can support USB flash drive from 2GB to 64GB FAT32 Best to format the USB flash drive usin W30 E 50 7 USB Flash Drive OSD MENU There are 5 tabs on the OSD menu IMAGE PRESENTATION SETTING and SYSTEM In Playback mode you can access PLAYBACK OSD menu to enable the Slide Show feature and modify Slide Show interval and transition setting if desire For TV output the RESOLUTION will be disabled in SETTING menu list PRESENTATION SETTING BINDING SYSTEM PLAYBACK 19 Navigate the Menu and Submenu EN S gt n 1 Press MENU button on the remote or control panel 2 Press gt and 4 to toggle between tabs 3 Press V and A to choose a selection in the menu list 4 Press to make a selection 5 Use and 4 to adjust the setting or make a selection 6 Press to enter submenu 7 Press MENU to close the OSD menu Brightness Adjust brightness level manually between 0 and 63 Contrast Adjust the contrast level manually between 0 and 255 under bright and dark environments 20 Select from the various imag
3. 336mm 90 A EX Paper Guide The A4 paper marks serve as a guide for placing the A4 document under the camera The approximate shooting area of W30 camera is 330mm x 248mm ENGLISH Infrared Sensor The IR sensor is located on the W30 base only Aim the remote control at the infrared sensor to operate the unit External Memory Storage W30 supports both SD memory card and USB flash drive for more image capture capacity It can detect when there is an external storage media and automatically switch to the last detected storage If no external storage is connected all captured still images will be saved in the built in memory Insert an SD Card Insert the card with the contact facing down until it reaches the end To remove the card push to eject and pull the card out The supported SD card capacity is from 1GB to 32GB FAT32 We recommend using SDHC card with class 6 or above for high quality recording ENGLISH Insert a USB Flash Drive 1 Set the USB switch on W30 base right panel to C W30 will then detect the USB flash drive and the LED on the control panel will light up S 4
4. gt to make a selection 8 SLIDE SHOW Start Stop automatically showing the captured picture one by one 9 TIMER Call the Timer submenu Select to Start Pause Stop the timer countdown and set the timer duration fig 2 0 10 RECONNECT Reconnect the W30 camera with the base 11 SOURCE Select from 6 types of display options CAM display the video signal from the W30 camera RGB IN display the video signal from the W30 base RGB IN port PLAYBACK display the picture from the memory source CAM RGB IN half of the screen display the video signal from the W30 camera and the other half display the video signal from W30 base RGB IN port SPLT SCRN half of the screen display the video signal from the W30 camera and 8 thumbnail picture from the memory PIP display a thumbnail picture from the memory at the corner of the screen over the full screen video signal from the W30 camera 12 DEL Delete the selected picture video in Playback mode 13 AUTO IMAGE Automatically adjust and set the white balance and exposure setting OOnNDO BR COT nnn lt mS u gt tt ENGLISH Name Function 14 BRIGHTNESS Adjust the brightness 15 ZOOM Increase decrease the image magnification in camera and picture playback mode Use to easily page up and page down 16 thumbna
5. Select the capture type Single capture one picture only Continuous capture successive pictures Interval Set the time interval for continuous capture The length can be set up to 600 sec 10 min Storage Change the storage location Format Format to delete all the data in the selected memory USB to PC Select the status of the W30 when it is connected to the computer via USB Make sure the USB switch on the right panel is set to 29 Camera can be used as a computer webcam or with our bundled software to record video and capture still image Storage transfer the captured pictures from the memory to computer hard disk 25 Flicker Select between 50Hz or 60Hz Some display devices cannot handle high refresh rates The image will flicker a couple of times as the output is switched to another refresh rate Binding Use this to bind the W30 camera with the base To bind Select Connect and press to start binding Then use a pen and poke the bind button on the right panel of W30 camera a L I BINDING DC 12v Language Change and select different language Backup Copy the image from the built in memory to SD card or USB flash drive 26 Save Setting Save current setting in the selected profile number Only effect mode brightness and contrast
6. Optional Accessories 28mm Rubber 34mm Rubber a Microscope Adapter Coupler Coupler Light Box ENGLISH Get Familiar with the AVerVision W30 Camera fig 1 1 Name Function 1 Camera Head Contain the camera sensor 2 Camera Lens Focus the image in the camera 3 Control Panel Easy access to various functions Connection for the power adapter to charge the battery and binding RN button to tie up with the W30 base 5 Battery Rechargeable battery location Compartment 6 Paper Guide Guide to position the A4 size paper 7 LED Light Indicate the wireless signal condition power status battery life and 9 power connection mode 8 Label Slot Label the W30 camera 9 Swivel Arm Fold and unfold the arm of the W30 camera Right Panel 1 2 fig 1 2 1 DC12V Connect the power adapter into this port to charge the battery 2 Binding Use a pen and poke to bind the W30 camera with the W30 base ENGLISH Control Panel l 5 1 2 3 4 m gt w30 fig 1 3 1 Power Turn the W30
7. 18 OSD MENU me 19 Navigate the Menu and 20 ET 20 BONO cM T T 20 Gai m E 20 E T E 21 ES RN asec ae 21 ipe WT METERS 21 m 21 BUND 22 22 White 22 ENGLISH EES SIM ANON m 23 GID TTE 23 ener T 23 xw 23 jig 24 sino M M E 24 ee 24 OW 24 24 0 A E 25 later 25 See NUM ENT 25 25 Baie 25 ani M Ce 26 EHE 26 26 26 PATNA NG cris TENER EE 26 zw 26 Save Setting NRI I RR DNE 27 mises PL 27 cece DOT TEE 27 me C 27 OAC avert 28 OW 28
8. NE 28 Slide Show 28 C rrent Storage Rom 28 brc PAAA PTE E 29 Transfer Captured Images Videos to a computer 29 Technical Specifications 30 30 8j m 30 30 To e UO UN es een 30 PNE ee ee 30 External ee ieee 31 Using the RS 232 Interface 31 Connect to the Computer 5 232 31 RS 232 Cable 31 RS 232 Transmission Specifications 32 RS 232 Communication 32 RS 232 Send Command 32 RS 232 Get Command 35 Troublesho0lind us 36 Limit d Warranty e 37 ENGLISH Package Contents Make sure the following items are included in the package Cable qut W30 camera _ 2 Power Adapter 12V 3A The power adapter will vary depending on the standard power outlet of the country where it is sold Software amp Manual CD Remote Control batteries included
9. AVer warrant that You will be able to operate the Product without problems or interruptions or that the Product is suitable for your purposes Your exclusive remedy and the entire liability of AVer under this paragraph shall be at AVer s option the repair or replacement of the Product with the same or a comparable product This warranty does not apply to a any Product on which the serial number has been defaced modified or removed or b cartons cases batteries cabinets tapes or accessories used with this product This warranty does not apply to any Product that has suffered damage deterioration or malfunction due to a accident abuse misuse neglect fire water lightning or other acts of nature commercial or industrial use unauthorized product modification or failure to follow instructions included with the Product b misapplication of service by someone other than the manufacturer s representative c any shipment damages such claims must be made with the carrier or d any other causes that do not relate to a Product defect The Warranty Period of any repaired or replaced Product shall be the longer of a the original Warranty Period or b thirty 30 days from the date of delivery of the repaired or replaced product Limitations of Warranty AVer makes no warranties to any third party You are responsible for all claims damages settlements expenses and attorneys fees with respect to claims made against You as a result
10. CVBS VIDEO TN use RS 232 CVBS cable Connect to a Monitor or LCD DLP Projector Locate the RGB VGA input port of the graphics display device and connect it to RGB OUT port of W30 base Make sure the TV RGB switch is set to RGB RS292 6V88 RGB IN RGB OUT DVH OUT 2 LCD monitor 00 000 s s s m 000 LJ LCD DLP projector ENGLISH Connect to a Monitor or LCD DLP Projector with DVI I interface Locate the DVI I input port of the display device and connect it to DVI I OUT port of W30 base Make sure the TV RGB switch is set to RGB CN gt se LCD Monitor not supplied with DVI interface gt WES cable LCD DLP projector not supplied with DVI interface Connect to a TV Locate the VIDEO
11. TVOUT MODE PAL 0x00 TVOUT MODE RGB 0x00 USBSWITCH DEVICE 0x00 USBSWITCH HOST 0x00 AUTO TEST MODE OFF 0x00 AUTO TEST MODE ON 0x00 RS 232 Get Command Table Send Format 0x52 0x01 Data 0 0x53 CheckSum Receive Format 0x53 0x01 ReData 0 0x53 ReCheckSum 1 0x0C xor 0x01 xor ReData 0 xor 0x52 Function Data 0 ReData 0 ENGLISH CheckSum ReData 0 Function Data 0 Code Power Status 0x5C 0 OFF 1 ON Lamp Status Ox5D 0 OFF 1 ON 0 Camera Mode Display Status 0x06 Ox5E 1 Playback Mode 2 PC 1 Pass Through Video Output Status 0 1 TV Brightness Value 0x52 LIGHT BOX Status 0x54 Troubleshooting This section provides many useful tips on how to solve common problems while using the W30 There is no picture on the presentation screen 1 Check all the connectors again as shown in this manual 2 Check the on off switch of the display output device 3 Verify the setting of the display output device 4 f you are presenting from a notebook or computer through the display output device check the cable connection from computer RGB VGA output to RGB IN of W30 base and make sure W30 is in PC Mode 5 Press RECONNECT button to reestablish connection with the W30 camera and base or bind the W30 camera and the base again have set up the W30 and checked all the connections as specified in the manual but cannot get a pi
12. camera on off 2 Zoom Increase the magnification of the W30 camera image 3 Zoom Decrease the magnification of the W30 camera image 4 Auto Focus Adjust the focus automatically LED Light Q E O m MN fig 1 4 Symbol LED Pattern State Steady Green Binding the W30 camera with the W30 base 1 a Continuous Data transition It sends the W30 camera data to W30 Green Flashing base Steady Blue W30 camera is power on 2 No Light W30 camera is power off Green Battery life is greater than 2096 3 1m Red Battery life is less than 20 The W30 camera battery requires charging Green Battery is fully charged You may unplug the power adapter or continue to use the power source from the 4 gt power adapter Hed Charging the battery No Light The power adapter is not connected ENGLISH Base i 2 fig 1 5 Name Function 1 Antenna Send and receive data signal to and from W30 camera and base 2 Rear Panel Connections for computer RGB DVI I RCA external display device and RS 232 communication port 3 Control Panel Easy access to various functions 4 IR Sensor Receive remote control commands 5 Right Panel Switches for USB and output display selection and SD card slot 6 Left P
13. of Your use or misuse of the Product This warranty applies only if the Product is installed operated maintained and used in accordance with AVer specifications Specifically the warranties do not extend to any failure caused by i accident unusual physical electrical or electromagnetic stress neglect or misuse ii fluctuations in electrical power beyond AVer specifications iii use of the Product with any accessories or options not furnished by AVer or its authorized agents or iv installation alteration or repair of the Product by anyone other than AVer or its authorized agents Disclaimer of Warranty EXCEPT AS EXPRESSLY PROVIDED OTHERWISE HEREIN AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW AVER DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO THE PRODUCT WHETHER EXPRESS IMPLIED STATUTORY OR OTHERWISE INCLUDING WITHOUT LIMITATION SATISFACTORY QUALITY COURSE OF DEALING TRADE ENGLISH USAGE OR PRACTICE OR THE IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FORA PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS Limitation of Liability IN NO EVENT SHALL AVER BE LIABLE FOR INDIRECT INCIDENTAL SPECIAL EXEMPLARY PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS DATA REVENUE PRODUCTION OR USE BUSINESS INTERRUPTION OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ARISING OUT OF OR IN CONNECTION WITH THIS LIMITED WARRANTY OR THE USE OR PERFORMANCE OF
14. or SCART RGB if applicable input port of the TV or video equipment i e VCR to record your presentation and connect it to RCA jack of RS 232 CVBS cable A DE ra RS 232 CVBS cable m Projector G SO VA cable Television gt RCA to SCART cable REE not supplied SCART ENGLISH Connecting the Power Connect the power adapter to a standard 100V 240V AC power outlet The unit automatically in standby mode once the power is connected Press to turn on er Wall outl Power adapter all outlet Connect to Computer Locate the RGB VGA output port of the computer or laptop and connect it to RGB IN port of W30 base The video signal from the RGB IN port is streamed to RGB OUT port control or SOURCE button and select RGB IN For laptop to output display image use the keyboard command FN F5 to switch between the display modes For different command please refer to your
15. parts Half of the screen displays the image from W30 camera and the other half display the image from RGB IN Right E CAM Left CAM Below CAM Top Split Screen Select to change the layout of the Split Screen The display layout can only be changed when the W30 is in SPLIT SCREEN mode To switch to this mode press SOURCE button and select SPLIT SCRN This divides the screen into two parts Half of the screen displays the 8 thumbnail pictures from the memory source and the other half display the image from the W30 camera Pictures Left 3 Pictures Right Pictures Below Pictures Top PIP Select to change the location of the single thumbnail picture viewer The location can only be changed when the W30 is in PIP mode To switch to this mode press SOURCE button and select PIP This displays the single thumbnail picture viewer at the corner of the screen and on top of the W30 camera live image 7 Lower Left all Upper Left m Upper Right Lower Right 23 Timer Start Pause Stop the timer and set the timer duration The timer automatically counts up after the countdown reaches zero to show the elapsed time Even when you switch between different video display sources the timer will continue Capture Select to set the capture resolution quality type and interval settings Resolution Select the capture size Quality Select the capture compression setting 24
16. ANY PRODUCT WHETHER BASED ON CONTRACT OR TORT INCLUDING NEGLIGENCE OR ANY OTHER LEGAL THEORY EVEN IF AVER HAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AVER S TOTAL AGGREGATE LIABILITY FOR DAMAGES OF ANY NATURE REGARDLESS OF FORM OF ACTION SHALL IN NO EVENT EXCEED THE AMOUNT PAID BY YOU TO AVER FOR THE SPECIFIC PRODUCT UPON WHICH LIABILITY IS BASED Governing Law and Your Rights This warranty gives you specific legal rights You may also have other rights granted under state law These rights vary from state to state For warranty period please refer to the warranty card
17. FULL SCREEN 0x00 EFFECT COLOR 0x00 EFFECT NEGATIVE 0x00 AUTO IMAGE OFF 0x00 AUTO IMAGE ON 0x00 EXPOSURE AUTO 0x00 EXPOSURE MANUAL 0x00 EXPOSURE MANUAL INCREASE 0x00 WHITE BALANCE AUTO 0x00 WHITE BALANCE MANUAL 0x00 WHITE BALANCE BLUE INCREASE 000 WHITE BALANCE BLUE DECREASE 0x0 WHITE BALANCE RED INCREASE WHITE BALANCE RED ENGLISH Function Data 0 Data 1 Data FLICKER 60Hz 0x00 FLICKER AUTO 0x00 PIP POSITION BOTTOM LEFT 0x00 PIP POSITION TOP LEFT 0x00 PIP POSITION TOP RIGHT 0x00 PIP POSITION BOTTOM RIGHT 0x00 SPLITSCREEN OFF 0x00 SPLITSCREEN ON 0x00 SPLITSCREEN DIR UPPER SCREEN 0x26 0x01 0x00 0 7 SPLITSCREEN DIR LOWER SCREEN 0x26 0x02 0x00 Ox7F SPLITSCREEN DIR LEFT SCREEN 0x26 0x03 0x00 Ox7E STORAGE EMBEDDED 0x00 STORAGE SD CARD 0x00 STORAGE THUMB DRIVE 0x00 FORMAT EMBEDDED 0x00 FORMAT SD CARD 0x00 D iia Ee T aid OUTPUT RESOLUTION USB CONNECT MASS ENGLISH Function Data 0 Data 1 Data 2 CheckSum BACKUP TO THUMBDRIVE 0x00 PROFILE SAVE PROFILE 1 0x00 PROFILE SAVE PROFILE 2 0x00 PROFILE SAVE PROFILE 3 0x00 PROFILE RECALL PROFILE 1 0x00 PROFILE RECALL PROFILE 2 0x00 PROFILE RECALL PROFILE 3 0x00 SLIDESHOW OFF 0x00 SLIDESHOW ON 0x00 SLIDESHOW EFFECT EFFECT 1 0x00 SLIDESHOW EFFECT EFFECT 2 0x00 SLIDESHOW EFFECT EFFECT 3 0x00 SLIDESHOW EFFECT EFFECT 4 0x00 SEDE MON EFFECT RANDOM dxd TVOUT MODE NTSC 0x00
18. I o TT AVer AVerVision W30 User Manual ENGLISH Federal Communications Commission Statement Class A NOTE This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by tuning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio television technician for help Class A ITE Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits Such equipment should not be restricted in its sale but the following warning shall be included in the instr
19. an now transfer the captured image s from the W30 built in memory to the computer hard disk ENGLISH Technical Specifications Image 50Hz 60Hz 1024x768 800x600 240 Frames XGA 80 Frames 3M Pixel Optics Shooting Area 330mm x 248mm 16X 2X AVERZOOM 8X Digital Zoom Power Power Source DC 12V 100 240V 50 60Hz Consumption Camera 5W Input Output USB2 0 Dimension Camera Operating 520mm x 114mm x 336mm 2mm include rubber foot Camera Folded 275mm x 114mm x 71mm 2mm include rubber foot io ENGLISH External Storage Secure Digital SDHC 1GB 32GB FAT32 2GB 64GB FAT32 Using the RS 232 Interface W30 can be controlled using a computer or any centralized control panel through RS 232 connection The command code for RS 232 is provided for the system integrator to be able to incorporate it with the system program Connect to the Computer RS 232 Locate the RS 232 port of the computer and connect it to RS 232 jack of RS 232 CVBS cable KCN RS 232 CVBS cable _ RS 232 cable N not supplied Laptop RS 232 Cable Specifications w Desktop Make sure the RS 232 cable matches the cable specification design ENGLISH RS 232 Tran
20. anel Connection for power and output resolution selection switch 7 LED Light Indicate the display output selection USB switch selection and wireless signal condition Rear Panel ji 1 fig 1 6 Name Function 1 DVI I OUT Connect the W30 base to any display device with DVI cable 2 RGB OUT Connect the W30 base to any display device with RGB cable Input the signal from a computer or other sources and pass it 3 RGB IN through to the RGB OUT port only Connect this port to the RGB VGA output port of a computer ENGLISH Connect the supplied RS 232 CVBS cable into this port The RCA jack outputs the video signal from the camera to a TV or 4 RS 232 CVBS port video equipment The RS 232 jack is used to connect to computer serial port or to any control panel or for centralized control if desire Right Panel 3 fig 1 7 Name Function TV switch to output display video from RS232 CVBS via RCA C TV RGB switch connection and RGB to RGB OUT and DVI I OUT ports 2 SD card slot Insert the SD card with the label facing up Switch to for saving displaying the captured image directly to a 3 USB switch USB flash drive and when connecting W30 base to a computer via USB cable and use it as computer webcam or transfer the captured image to computer Left Panel Fu
21. cture on the preferred presentation screen 1 Once the power is connected the unit is set to standby mode Press the POWER button to turn on 2 f your display output device is on TV or any analog device please switch the TV RGB dip switch to TV 3 The W30 camera could be power off the battery needs charging 4 The wireless signal could be low Move the W30 camera closer to the base The picture on the presentation screen is distorted or the image is blurry 1 Resetall changed settings if any to the original manufacturer default setting Press MENU then go to SYSTEM gt Default and select YES in the OSD menu 2 Use the Brightness and Contrast menu functions to reduce the distortion if applicable 3 If you discover that the image is blurry or out of focus press the Auto Focus button on the control panel or remote control There is no computer signal on presentation screen 1 Check all the cable connections among the display device W30 base and your PC 2 Connect your PC to the W30 base first before you power on your computer 3 For notebook repeatedly press FN F5 to toggles between display modes and display the computer image on the presentation screen For different command please refer to your laptop manual ENGLISH The presentation screen does not show the exact desktop image on my PC or Notebook after toggle from Camera to PC mode 1 Return to your PC or Notebook place the mouse on the desktop and rig
22. e display settings Sharp adjust the contrast along the edges making text appear more visible Graphics adjust the gradient of image Motion increase frame rate Sufficient lighting is required when using this mode Microscope automatically adjust optical zoom for microscopic viewing Effect Convert the image into positive true color monochrome black and white or negative Mirror Select to flip the image in Camera mode Advanced Select to set the Auto Image Exposure and White Balance settings 21 Auto Image Select ON or OFF to automatically adjust the white balance and exposure setting and correct the color and exposure compensation Exposure Select the exposure setting AUTO automatically adjust the camera exposure and the amount of light required MANUAL manually adjust the exposure level The exposure can be adjusted up to 100 White Balance Select the White Balance setting for various light conditions or color temperature AUTO automatically adjust the white balance MANUAL manually adjust the red and blue color level The color level can be adjusted up to 255 Focus Manually adjust the focus 22 Presentation CAM RGB IN Select to change the layout of the CAM RGB IN The display layout can only be changed when W30 is in RGB IN mode To switch to this mode press SOURCE button and select CAM RGB IN This divides the screen into two
23. ht click choose Properties choose Setting tab click on 2 monitor and check the box Extend my Windows desktop onto this monitor 2 Then go back one more time to your PC or Notebook and place the mouse on the desktop and right click again 3 This time choose Graphics Options then Output To then Intel Dual Display Clone and then choose Monitor Notebook 4 After you follow these steps you should be able to see the same desktop image on your PC or Notebook as well as on the presentation screen AVerVision W30 can t detect the inserted USB flash drive Make sure the USB flash drive switch is set to and check if the USB flash drive is properly inserted Limited Warranty For a period of time beginning on the date of purchase of the applicable product and extending as set forth in the Warranty Period of AVer Product Purchased section of the warranty card AVer Information Inc AVer warrants that the applicable product Product substantially conforms to ANer s documentation for the product and that its manufacture and components are free of defects in material and workmanship under normal use You as used in this agreement means you individually or the business entity on whose behalf you use or install the product as applicable This limited warranty extends only to You as the original purchaser Except for the foregoing the Product is provided AS IS In no event does
24. il picture preview Make a selection in Playback mode and OSD menu Play Pause picture slide show 17 A V lt 4 amp gt Pan the image when image is magnified in playback and camera mode Move the selection in Playback mode and in OSD menu 18 MENU Open and exit the OSD menu 19 AUTO Adjust the focus automatically FOCUS 20 FREEZE Freeze live images in camera mode Pause slide show in playback mode 21 CAPTURE Capture still image in Camera mode In continuous capture mode press this button again to stop 22 MODE Select from 4 type of modes Sharp adjust the contrast along the edges making text appear more visible Graphics adjust the gradient of image Motion increase frame rate Sufficient lighting is required when using this mode Microscope automatically adjust optical zoom for microscopic viewing ENGLISH Making the Connection Before making the connection make sure the power of all devices are turned off If you are not sure on where to connect simply follow the illustrated connections below and also refer to the user manual of the device you are connecting the W30 base with Set the TV RGB Switch Setting The TV RGB switch determines the display output selection Switch it to RGB right to output signal using RGB DVI I connection and TV left to output signal using RCA connection see fig 1 7 1 Switch Display Device Port DVI I OUTPUT DVI I INPUT RS232
25. laptop manual To display computer image press Camera PC button on the remote Em IE i IE ae mm lt gt RGB cable cp fm ENGLISH Connect to a Computer via USB 1 Set the USB switch on W30 base right panel to El and the El LED on the control panel will light up This enables you to use W30 as a USB Camera or to transfer the captured pictures from the memory source and to computer Also see Transfer File from W30 to PC 2 Locate the USB port of the computer or laptop and connect it to port of W30 base Desktop USB cable ENGLISH Connect to a Microscope Connect the W30 camera to a microscope enables you to examine microscopic objects on a big screen 1 AN 6 Change the image display mode to Microscope Press MENU gt select IMAGE tab gt select MODE gt select microscope and press Aim the camera head the farthest point and press AUTO FOCUS Adjust the focus of the microscope Select the ap
26. nction Set the output resolution You may refer to the table printed on the side 1 Resolution 1920 x 1080 1280 x 720 4 9 9 1600 1200 4 1024 768 1280 1024 i 800 600 1 0 12 Connect the power adapter into this port L T fig 1 8 ENGLISH Control Panel A VarWVision 12 11 10 9 2 8 3 7 4 6 5 fig 1 9 1 POWER Turn the unit on standby mode 2 AUTO FOCUS Adjust the focus automatically 3 RECONNECT Reconnect the W30 camera and base 4 SOURCE Select from 6 types of display options CAM display the video signal from W30 camera RGB IN display the video signal from the W30 base RGB IN port PLAYBACK display the picture from the memory source CAM RGB IN half of the screen display the video signal from the W30 camera and the other half display the video signal from W30 base RGB IN port SPLT SCRN half of the screen display the video signal from the W30 camera and 8 thumbnail picture from the memory PIP display a thumbnail picture from the memory at the corner of the screen over the full screen video signal from the W30 camera 5 FREEZE Freeze live images in camera mode Pause slide show in playback mode 6 CAP DEL Ca
27. propriate rubber coupler size for the microscope eyepiece and insert it in the microscope adapter Remove the microscope eyepiece from the microscope and connect it to the microscope adapter with the rubber coupler inserted Fasten the 3 bolts until the adapter secures the eyepiece Microscope S For the eyepiece we suggest using eyepiece 15 5mm eye relief or higher Attach the microscope adapter to the W30 camera head Then connect the eyepiece to the microscope ENGLISH Be sure to match the latches to the holes and the arrow on the microscope adapter and W30 camera head are on the same side Connect and then twist counterclockwise to lock Setting Up and Operating W30 This section provides useful tips on how to adjust the W30 to meet your needs Unfolding the W30 camera 1 Unfold the arm 2 Turn 90 to the left 3 Swivel up to the left 4 Fold the camera down Orient the W30 base Antenna Orient the W30 base antennas sloping away at 45 degree The best reception range between the W30 camera and base is within 15m 45 ft The W30 camera and base already pre bound in the factory If the signal from the camera is not detected press RECONNECT button ENGLISH W30 Camera Operating Height amp Angle The approximate height of W30 camera should be at 336mm and angled at 55 to display A4 size landscape document 90
28. pture still image in Camera mode In continuous capture mode press this button again to stop Delete the selected picture in Playback mode 7 MENU Open and exit the OSD menu Make a selection in Playback mode and OSD menu Play Pause picture slide show 9 Show the wireless signal condition Steady Green binding the W30 camera with the W30 base Continuous Green Flashing data transition It sends the W30 camera data to W30 base 10 USB Switch LED Indicate the USB switch selection to show which USB port is activated 7 allowing you to use the W30 as USB camera or transfer the captured images from the memory to computer allowing you to save still image in the USB flash drive ENGLISH 11 OUTPUT LED Indicate TV RGB switch selection to show which port the video signal is sent out RGB indicates the video signal is sent out thru RGB OUT and DVI OUT ports TV indicates that the video signal is sent out thru RS232 CVBS port via RCA connection 12 lt amp gt Pan the image when image is magnified in playback and camera mode Move the selection in Playback mode and in OSD menu Remote Control The remote control requires two 2 AAA size batteries supplied make sure batteries are installed properly before use You can access all the features of AVerVision W30 with the remote 1 POWER Turn the unit on standby 1 2 Switch between Camera and compu
29. settings can be saved Recall Setting Restore the setting back to the selected profile number Information Display the product information Default Restore all the settings into original factory default setting 27 Playback Slide Show Start stop to display all captured images in an automated slide show Interval Set the interval before displaying the next picture The length can be set up to 100 sec Slide Show Effect Select the slide show transition effect Li Slide image d Wipe right Checker down Split Vertical Out Wipe down ud Split Horizontal Out Current Storage Select the source of the images 28 ENGLISH Menu Screen Function Delete All Permanently delete all the data in selected memory source A Warning Message will appear Select YES to continue and NO to stop deleting all the data Transfer Captured Images Videos to a computer This enables you to transfer the captured image from the built in memory or SD toa computer The instruction below MUST be read and followed BEFORE connecting the USB cable 1 Make sure to set the USB switch to amp amp for the computer to detect W30 2 MUST set the USB to PC as STORAGE before connecting the USB cable 3 When Mass Storage appears at the lower right corner of the presentation screen you may now connect the USB cable 4 Upon connecting the USB cable the system automatically detects the new removable disk You c
30. smission Specifications Start bit 1 bit Data bit 8 bit Stop bit 1 bit Parity bit None X parameter None Baudrate Communication speed 9600bps RS 232 Communication Format Send Device Code 1 Byte 0x52 Type Code 1 Byte OxOB DataLength Code 1 Byte 0x03 Data Code 1 Byte See the Command Table for reference Data Code 2 Byte See the Command Table for reference Data Code 3 Byte See the Command Table for reference Receive Device Code 1 Byte 0x53 CheckSum Code 1 Byte See the Command Table for reference Format Start Type DataLength Data CheckSum Example 0x52 OxOB 0x03 0x3 0x01 0x00 0x00 0x53 Command Power RS 232 Send Command Table Send Format 0x52 OxOB 0x03 Data 0 Data 1 Data 2 0x53 CheckSum Receive Format 0x53 0x00 0x02 2 3 0x52 CheckSum 1 CheckSum 0x0B xor 0x03 xor Data 0 xor Data 1 xor Data 2 xor 0x53 2 Receive data OxOB ID error 0x01 CheckSum error 0x02 Not Command 0x03 Function fail 0x04 3 Data 0 Return 0x00 if error Function Data 0 Data 1 Data 2 CheckSum IMAGE CAPTURE TYPE IMAGE CAPTURE CONTINUOUS IMAGE CAPTURE CONTINUOUS IMAGE CAPTURE RESOLUTION ENGLISH Function Data 0 Data 1 Data TIMER SET TIME 1 120 0x00 PREVIEW MODE TEXT 0x00 PREVIEW MODE GRAPHIC 0x00 PREVIEW MODE HIGH FRAME 0x00 PREVIEW MODE MICROSCOPE 0x00 PLAYBACK
31. ter mode 22 Camera mode displays the video signal from the W30 camera c PC mode displays the video signal 20 from the RGB IN port of W30 base i 3 PLAYBACK View the captured picture from the memory in 16 thumbnail images v 4 NEAR FAR Adjust the focus manually 15 5 DEFAULT Reset to factory default setting 6 SPLIT Divide the screen into two One side SCREEN displays the live image from the W30 camera and the other side displays 8 thumbnail size picture from the memory Press to only display the selected image and again to revert back to 16 thumbnail preview Use 4 amp gt buttons to pan the single image preview to the left and right fig 2 0 To change the split screen layout press MENU gt PRESENTATION gt PBP and press to enter Use the 4 amp to choose from the selections and press to make a selection ENGLISH 7 Display a thumbnail size picture from the memory at the corner of the screen and on top of the W30 camera live image Press to only display the selected image in full screen and again to revert back to thumbnail size picture Use 4 amp gt buttons to switch to the next and previous picture change the thumbnail location press MENU PRESENTATION PIP and press to enter Use the 4 amp to choose from the selections lt Lo 4
32. transmitted transcribed stored in a retrieval system or translated into any language in any form by any means without the written permission of AVer INFORMATION Inc THE MARK OF CROSSED OUT WHEELED BIN INDICATES THAT THIS PRODUCT MUST NOT BE DISPOSED OF WITH YOUR OTHER HOUSEHOLD WASTE INSTEAD YOU NEED TO DISPOSE OF THE WASTE EQUIPMENT BY HANDING IT OVER TO A DESIGNATED COLLECTION POINT FOR THE RECYCLING OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT FOR MORE INFORMATION ABOUT WHERE TO DROP OFF YOUR WASTE EQUIPMENT FOR RECYCLING PLEASE CONTACT YOUR HOUSEHOLD WASTE DISPOSAL SERVICE OR THE SHOP WHERE YOU PURCHASED THE PRODUCT ENGLISH Remote Control Battery Safety Information Store batteries in any cool amp dry place Do not dispose used batteries in domestic waste Dispose batteries at special collection points or return to stores if applies Remove the batteries if they are not in use for long period of time Battery leakage and corrosion can damage the remote control dispose batteries safely Do not mix and use old and new batteries Do not mix and use different types of batteries alkaline standard carbon zinc or rechargeable nickel cadmium not dispose batteries in a fire Do not attempt to short circuit the battery terminals ENGLISH Table of Contents Package Contents _ susanne een an nassen einen 1 Optional Accessories 1 Get Familiar with the AVerVision W30
33. uctions for use Warning This is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures DISCLAIMER No warranty or representation either expressed or implied is made with respect to the contents of this documentation its quality performance merchantability or fitness for a particular purpose Information presented in this documentation has been carefully checked for reliability however no responsibility is assumed for inaccuracies The information contained in this documentation is subject to change without notice In no event will AVer be liable for direct indirect special incidental or consequential damages arising out of the use or inability to use this product or documentation even if advised of the possibility of such damages TRADEMARKS AVerVision is registered trademarks of AVer Information Inc IBM PC is a registered trademark of International Business Machines Corporation Macintosh is a registered trademark of Apple Computer Inc Microsoft is a registered trademark and Windows is a trademark of Microsoft Corporation All other products or corporate names mentioned in this documentation are for identification and explanation purposes only and may be trademarks or registered trademarks of their respective owners COPYRIGHT 2011 by AVer Information Inc All rights reserved No part of this publication may be reproduced

AVerVision W30 - TBI

Contents

Download Pdf Manuals

Related Search

Related Contents