LDD-2655DVBT_IB - Besøg masterpiece.dk
Contents
1. Stripes appear on the screen and it shakes The screen does not move Screen appears Voice is not heard Remote control does not work Action Is the power plug pulled out Insert the power plug Press the power button of the remote control This problem occurs for a brief time in the process of image elimination processing in order to hide temporary screen noise that occurs when the power is turned on But if the screen does not come after 1 minute contact your dealer or an authorized service center Perform brightness adjustment or Contrast adjustment Adjust the screen size Stop using wireless telephones hair driers and electric drills Press the PAUSE button Check if the Pause button is pressed on external equipment 1 Press the MUTE button 2 Increase the sound level by pressing volume adjustment button 3 Check if sound terminal of external input is connected properly 4 Check if audio cables are connected properly 5 Select and check the other input If the sound still does not work and the other channels are the same after you have done as the above contact your dealer or an authorized service center 1 Check if main power is On 2 Check that the batteries of the remote controller were loaded properly 3 Check to see if any obstacle exists between the TV and the remote control then remove it if any 4 If the batteries have no power replace them with two new batteries e This TV is f2. DENVER 26 hd ready led tv with atv and mpeg 2 dvb t c i amp built in dvd player usb input PVR function Model NO LDD 2655DVBT Instruction Manual Contents Caution Safety Information Accessories Technical Specification Product Introduction Front View Rear View Connections Remote Control Basic Operation OSD Menu CHANNEL menu PICTURE menu SOUND menu TIME menu OPTION menu LOCK menu Hotel mode Ooh WN Multimedia Operation Recording Operation DVD Operation Simple Troubleshooting h 9 16 9 10 12 13 15 16 16 17 19 20 22 23 30 31 Caution Caution The lightening flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Correct disposal of this Product Waste Electrical amp Electronic Equipment WEEE Your product is designed and manufactured with high quality materials and components which can be recycled and reused This symbol means that electrical and electronic equipment at their end of life should be disposed of separatel
3. Storage To 1 System Select a TV system for searching system DK Current CH Select the channel you want to manual tuning i Current CH 6 Search Press lt gt button to manual search Search Fine Tune Press lt gt button to fine tune Fine Tune Frequency Display the current frequency Note Press RED button to save all the setups you have Move Save changed OSD Menu Programme Edit Press OK button to enter the Program Edit menu as the following picture Programme Edit CH_NAME SKIP LOCK 1 BBC ONE in 2 BBC TWO i 3 BBC THREE i 4 BBC NEWS 24 5 BBCI 6 CBBC Channel T BBC World Newe Move Select k Back Y Delete Select a channel and press RED button Delete will appear on the right of the program edit menu next to the channel you have chosen then press RED button again the program will be deleted However if you decide not to continue to delete press the menu button to quit Move Select an channel and press YELLOW button then you can use A and V buttons to change the position of the program press YELLOW again to confirm the change Press menu to exit and it will automatically save the current set Skip Select a channel and press the BLUE button to label the channel as long as the channel has a skip label it will be skipped when searching through the channels with the CH buttons Rename Select an ATV channel and press the GREEN button to change the name of the channel by A
4. you may select an Age Control Grade according to grade of disc and your own preference For example if PG is selected DVD Video disc rated higher than the PG grade cannot be played e KID SAFE eG e PG e PG13 PGR e R e NC 17 e ADULT A E A Preference Page Set Parental GOnurol Password User can change the password that is required when the user wants to change the Age Control Grade in the Parental Lock function NOTE Default password is 123456 oa Preference Page Preverrec Parehuall Lame wace 29 DVD Operation ESI oa D Password Setup Page Chance PAaSSWORG Old Password New Password Confirm PWD Default DVD Operation User can load the original factory setting by choose RESET and press OK button Ss m2 Preference Page TV Type Audio Subtitle Disc Menu Parental Password Default Coac FAlCromny7 Serting 30 Trouble shooting Trouble shooting Do not use other functions that are not mentioned in this user s manual ln case a problem occurs with your TV please take the following steps first e f you still have the problem turn the power off and contact your dealer or an authorized service center Problem The screen does not appear The screen appears too slowly after the power is turned on Screen is too bright or too dark Screen is too large or too small
5. HDMI3 gt USB Move ox Select Exr Quit Submenu Chanel menu for example Hint you should operate the OSD menu according to the hint Use lt gt button to select the main menu and press V button to enter the submenu In the submenu use V button to select the function item press lt gt button to adjust setup or press OK button to enter the submenu Press MENU button to return to the upper menu Press EXIT button to exit the menu display Note1 Only when you input the suitable signal the relevant items can be activated Note2 Please operating the OSD menu according to hint on the bottom of the banner OSD Menu 1 CHANNEL menu Pirla 2 i ad Auto Scan DTV Manual Tuning elena os ATV Manual Tuning Programme Edit signal Information CHANNEL l Cl Information Software Update USB Select Quit Description Auto Scan Auto Scan Press OK button to enter the hint menu and select ENN EE vedn ae the Country and Tune Type mode for the TV then Tune Type 4 aTv DTV gt press OK button to start auto tuning Kein lt gt LCN Press gt to select on off DTV Manual Tuning Press OK button to enter the DTV Manual Tuning menu select a DTV channel and press OK button to start searching NO SIGMAL Bad Normal Sood m Back jer Guit ATV Manual Tuning Press OK button to enter the ATV Manual Tuning menu Storage To Select a position for storing the program ATV Manual Tuning
6. Remote Control Type infrared Control distance 5m Control angle 30 horizontal Batteries 2 x 1 5V size AAA Product Introduction Product Introduction Front View a INPUT cE Display the input source menu MENU IE Display exit the OSD menu l e CH IE scan through channels VOL lz Adjust the volume z PLAY Play pause the disc playing EJECT i 3 Eject the disc POWER Turn on standby the TV set _ SWITCH Ba Turn on off the power supply LED indicator o O Remote Control window keep clear IR Infrared Receiver Receives IR signals from the remote control Power on Standby LED indicator Press POWER to turn on and off Indicator on Red Standby mode Indicator on Off Power on mode The effective receiving range for the signal is 5 8 metres from the front of the remote control window and 30 to the left or right side and 20 above or below the control window y A yy C J l o e A E es ia ene Connections marked below the DVD slot AC PONER IN See next page Connections Connections Headphone Connect Hea
7. channel reveiving channel editing and so on Set Source Press A and Y to select Set Source and press button to select the source for the initial input source Channel Number If Set Source is TV DTV Radio or DTV Video press A and V button select Channel Number and then use gt to select the program number Picture Lock Press A and Y to select Picture Lock if Picture Lock is On the picture menu will not be shown Key Lock Press a and w select Key lock and then use P to lock the buttons on the TV set Max Volume Press a and w select Max Volume and then use P to select the max volume of the sound Source Lock Press a and v to select Source Lock and press P to select the source for prohibiting any external input Note The current using channels can not be locked Hotel Setting pis O lt J o o i Oo O O O g lt fe b y Move 4 gt Adjust Quit Clear Lock Press a and v to select Clear Lock and press gt to cancel all the settings of lock it means set all the locks to OFF preset channel to OFF max volume to 100 16 Multimedia Operation Multimedia Operation Basic Operation Press the INPUT button on the remote control to display the input source menu select USB source by the lt q gt buttons and press OK button to enter the Multimedia menu seen below _ Input Source gt lt lt J SCART YPBPR DVD HDMI HDMI2
8. on the screen Info Display the information of the movie Slow Play the programs at slow speed press play button to cancel Step Step the programs by OK button press P play button to cancel Goto Time Program the movie form the time you set Zoom out in Zoom out in the movie screen Aspect Ratio Select the aspect ratio of the screen display Move View Move the photo in Zoom in mode 4 Text Play the text Press lt gt button to select the option on the table and press OK button to change Prev Next page Turn to previous next page of the text Prev Next Turn to previous next file Stop Stop auto turning pages Music Play pause the music program Playlist Display the playlist on the screen Info Display the information of the text 19 Recording Operation Recording Operation PVR settings Press the MENU button and select CHANNEL menu n r Oe ee Software Update USB Record Start Recorded List Recording Timer Schedule List CHANNEL PVR File System A Select Quit 1 Recorded List Recorded List Programme BBC News Display the recorded list i i pH Recorded list Display the Recorder List menu Delete INFO and changed the mode of program INFO Display the information of the program you recorded ox Selec wuj Record List RED button Delete the program you select 2 Recording Timer Recording Timer aj 665335 Mode once Set the Recording Timer The
9. stops or the picture is frozen for a few minutes This saver can keep the screen from being damaged e On Start the screen saver e Off Remove the screen saver Last Memory Can set the items on the last memory on and off option select On the shutdown will shutdown the machine before the settings for memory re boot the machine settings Set near the same time Select Off every time the machine automatically switched back to the default settings e On Start the memory e Off Remove the memory 24 DVD Operation DVD Operation e Speaker Setup In the Audio Setup page press Y button to select Speaker Setup item press the OK ENTER or gt button play into the Speaker Setup Page 25 DVD Operation DVD Operation E ry Audio Setup Page __ Speaker Setup Downmix e LT RT A disc recorded multi channel soundtrack the output signal will be incorporated to left and right channel e Stereo A disc recorded multi channel soundtrack The output signal will be incorporated to stereo Ss of M Speaker Setup Page __ Downmix Set DOWMMIX MOCE 26 DVD Operation DVD Operation Dynamic This option is used to set the compression ratio in order to control the sound contrast G Dolby Te ao Dolby Digital Setup Dynamic Set DREG TO Ful oh h4 Preference Page
10. the menu and press OK button in DTV mode You can also start recording by press the button on the remote control Record buttons Recording Press to enter the recording mode ll PAUSE Press to enter the timeshift mode Recording list Press to display the recording list W Stop Press to stop recording Recording menu When you press REC button the screen will display the recording menu as below Full mode gt Simple mode Note a You could change the mode of Recording menu by Exit button b Press STOP button to exit the recording mode c Press PLAY button to play the program you are recording from the beginning d Press Recording list button to display the Recorder list and you could play the program you selected The recording will be going on and the Recording menu will display when you exit the Recorder list Timeshift Press PAUSE button to enter the Timeshift mode and the picture will be paused the recording will begin Note a You could change the mode of Timeshift menu by Exit button b Press STOP button to exit the Timeshift mode c Press PLAY button to play the program you are recording from the beginning Playback The current state of the program The current time The process of the program The name and number of the program 22 DVD Operation DVD Operation Basic Operation Press the Power button on the TV or the remote control then press the INPUT button to select DVD mod
11. ENU DVD play list Disc menu VOL sounD sleep 77 TITLE DVD title C2 ED D 62 PRO Edit the program and play E LAN Select DVD disc language 7 ap 2 ee A B Select and play the preferable paragraph of DVD program by pressing this key twice at the beginning and end of it GOTO Play your favorite title chapter track SLOW Play DVD programs at slow speed TVITXT CANCEL REVEAL 2 aq HOLD SIZE SUBPAGE INDEX GOTO Jag SLOW I Basic Operation Power on off 1 Connect to the power supply with the power cord 2 To turn on the TV Press POWER button on the TV or remote control To turn off the TV Press POWER button on the TV or remote control Input Source select Press INPUT button on the TV set or remote control to display input source menu and use CH button on the TV set or A V button on remote control to select the input source press OK button on the remote control to enter Note Before you select the input source make sure the connections are prepared Basic OSD Menu operation Press MENU button to display the OSD menu as below Main menu CHANNEL PICTURE i SOUND TIME i OPTION CHANNEL LOCK DTV Manual Tuning eee ca ATV Manual Tuning an ae pa 8 E a Pro gramme Edit l signal Information Cl Information Software Update USB A Back Select Quit Basic Operation Input Source DTV ATV S107 ag YPBPR BVA HDMI1 HDMI2
12. HDMI3 Z USB Move Select Quit N 5 D A C U UJ Q 9 lt O D lt O G h gt Q r mg D gt Q 3 D O h r gt D Q a lt O D G so Q lt O gt r gt D P2 O x D D 5 MAINS MENU PHOTO MUSIC MOVIE TEXT USB device list MAINS MENU PHOTO MUSIC MOVIE TEXT Hints for operation Hints and informations of USB device 3 Press lt gt button to select the kind of the files in the device you want to program from PHOTO MUSIC MOVIE and TEXT Press A V button to select the device and press OK button to enter Return to Preview device list Up Folder Informations Press lt gt A V buttons to move and press OK button to select the file or unfold the folder Then press gt button to program the files be signed you select or the files in the fold you select You can display the option table on the bottom of the screen by OK button press W button to hide Press I button to stop and exit the full screen program 17 Multimedia Operation 1 Photo Play the photo p n gt e0 6 8 8 2B 7 Repeat 1 Music Playlist Info Rotate Rotate ZOOMIN ZOOM OUT Press lt gt button to select the option on the table and press OK button to change Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Music Play pause the music program you can only play or pause the music you have programed Playlist D
13. Panorama Note The aspect ratio modes you can select according to the input source Noise Reduction Choose interference noise modes form Off Low Middle High and Default Screen PC mode only Press OK button to enter the submenu to adjust Horizontal Vertical position Size or Phase of the picture 11 OSD Menu 3 SOUND menu 4 G y Sound Mode Standard Treble 50 Bass 0 A Balance 50 Auto Volume On SOUND Surround Sound Sai Dli 1 B Back Select Quit Description Sound Mode Allows you to select among Standard Music Movie Sports and User Treble Could be adjusted when the sound mode is User Controls the relative intensity of higher pitched sounds Bass Can be adjusted when the sound mode is set to User Controls the relative intensity of lower pitched sounds Balance To adjust the balance of the left and right sound track or turn off the volume of the left and right sound track Auto Volume Control the volume of the program automatically when you turn on the function by selecting On Surround Sound Turn on off the surround sound function by selecting off surround SPDIF MODE Allows you to select among Off PCM and Auto 12 OSD Menu 4 TIME menu of Clock Off Time Fa On Time EE Sleep Timer Off Auto Sleep Off Time Zone Canary GMT Select Quit Description Clock Use the lt and gt buttons to sele
14. TV Type Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default Seat UW Stand ara You must press STOP twice to enter Preference Page or NO disc TV Type e PAL This is selected when the player is connected to an PAL System TV e MULTI The player will set the TV system according to the disc in the tray e NTSC This is selected when the player is connected toa NTSC System TV Audio If a language listed below is recorded on the disc you can play the sound in such language If not the language recorded will be used 2 DVD Operation Subtitle Ss ay Preference Page TV Type Audio Subtitle Disc Menu Parental Password Default Prererrec NUGCIO Language DVD Operation If a language listed below is recorded on the disc you set the subtitle to be displayed in such language If not the language recorded will be used Disc Menu A Preference Page TV Type Audio Subtitle Disc Menu Parental Password Default Prererrec Subiicdie Lameuace If a language listed below is record on the disc you can set the Menu to be displayed in such language If not the language recorded will be used Preference Page TV Type Audio Subtitle Disc Menu Parental Password Default Preverrech Mem uU EeinC UWeiCe Dolby D 28 DVD Operation DVD Operation Parental When playing disc with parental lock function
15. TV will record the program automatically according to your settings TITLE Display the name of the recording program MODE Select the record mode Start Time Set the start recording time End Time Set the end recording time Press OK button to save the setting and exit the menu start Time Minute 00 Hour 00 Date a0 Month Jan End Time Minute Hour Date Month 20 Recording Operation Recording Operation 3 Schedule List Schedule List oO a ia Programme Title Channel Name Back eTii Display the recorder shedule Note a Could t add shedules which have existent on the list b Could t add shedules when the list is full you have to delete some schedules c You could delete a schedules by RED button on the remote control 4 PVR File System PVR File System select Disk Check PVR File system USB Disk Format Time Shift Size speed Ll yo or ce Y i yy E Setup the PVR File system before you start recording Select Disk Select the device for the Record files Check PVR File System USB Disk Display the USB state Format Format the USB device for PVR operating Time Shift Size Display the size of the USB device The device has been formated Speed Display the speed of the USB device The device has been formated 21 Recording Operation Recording Operation 5 Record Start When you finish the settings above you could start recording by select Record Start in
16. V lt gt buttons FAV Select a program press FAV button to set or delete the program as the favorite channel Signal Information Display the signal information in DTV mode CI Information Please contact your pay perview provider who can supply a viewing card and cam unit with instructions for their use Software Update USB Press OK button to enter the menu and update the software by the USB device 10 OSD Menu 2 PICTURE menu r a ee eee x Picture Mode Standard Contrast 50 Brightness 50 Color 50 sharpness 50 PICTURE Tint 50 Color Temperature Medium Red 30 Back Select Quit Description Picture Mode Choose from Standard Dynamic User and Mild Note Contrast Brightness Color and sharpness are only available and can be adjusted in the User mode option in the Picture Mode Settings Contrast Controls the difference between the brightest and darkest regions of the picture Brightness Controls the overall brightness of the picture Color Control the color Sharpness Increase this setting to see crisp edges in the picture decrease it for soft edges Tint Controls the tint NTSC mode only Color Temperature Choose from Medium Cool User and Warm Red Controls the red colour of the picture Green Controls the green colour of the picture Blue Con trols the blue colour of the picture Aspect Ratio Choose from 4 3 16 9 Zoom1 Zoom2 Just Scan and
17. ct the Country when you want to auto tuning Restore Factory Default Press OK button to restore factory default 14 OSD Menu 6 LOCK menu 2 E GY y Lock System Set Password COSE Block Program Parental Guidance Hotel model Select Description Lock System Turn on off the Lock System function Note You should enter the code to operate the menu original code is 0000 Set Password Set pin code If the Pin code has been changed you must enter the present code New Enter the new password Confirm Enter the new password Block Program Lock the channel you have to enter the code to view the channel Use A and V buttons to select the channel and press the GREEN button on the remote control to lock the channel or canel Programme Edit CH NAME SKIP LOCK FAV 1 BBC ONE 2 BBC TWO 3 BBC THREE 4 BBC NEWS 24 5 BBCI 6 CBBC Channel 7 BBC World Newe Move Select Back Parental Guidance Allows you to select the Parental Guidance mode 15 OSD Menu Hotel Mode Hotel Setting Hotel Lock Lock Channel Set Source el Number Picture Lock Key Lock Max Volume Source Lock 4 gt Adjust Quit Hotel Lock Press a and w to select Hotel Lock and press p to select the ON or OFF Lock Channel If current SOURCE LOCK is TV press a and w select CHANNEL LOCK and then use gt to select the ON or OFF When choosing on in channel menu user can not operate the singal
18. ct the position and use the V and A buttons to set the time Note User can not change time manually during DTV mode for time is from signal source directly Off Time Press OK button to enter the submenu you could set the time when the TV set will be turned off automatically you could also set the frequency On Time Press OK button to enter the submenu you could set the time when the TV set will be turned on automatically you could also set the frequency volume and program Sleep Timer Allows you to setup the sleep timer among 10min 20min 30min 60min 90min 120min 180min 240min and off Auto Sleep Turn on off the auto standby function Time Zone Allows you to select the time zone 13 OSD Menu 5 OPTION menu a E OSD Language English Audio Languages 1st English ESAS Audio Languages and English j Subtitle Languages 1st English Subtitle Languages 2nd English OPTION OIDE DITTE hile a 10s Country UK Back Select Quit Description OSD Language Allows you to select menu language Audio Language 1st 2nd can be selected in DTV mode Allows you to select first and second audio language Subtitle Language 1st 2nd can be selected in DTV mode Allows you to select first and second subtitle language OSD Duration Allows you to setup the time of the menu display on the screen among 5s 10s 15s 20s 25s 30s 35s 40s Country Display the current Country and you should sele
19. dphone Headphone HDMI3 CI CI slot pay as you view card slot Coax Common Interface COAX Output to audio amplifier RF Connect to antenna or cable source in R in 00 AUDIO L R IN Audio signal input for AV Shared with YPbPr Video Connect to the video output of external devices YPbPr Connect to the YPbPr output on external devices with the converter cable USB Connect to USB device for multimedia HDMI1 2 3 Connect to the HDMI socket of your DVD or Satellite Box SCART Connect to the scart input output of external devices PC audio PC audio input VGA Connect to the PC VGA output to display PC graphics AC POWER IN Connect to power supply Remote Control Remote Control The remote control is using Infra Red IR Point it towards the front of the LED TV The remote control may not work correctly if it is operated out of range or out of angle POWER Turn the TV on standby MUTE Press to mute the sound press again or press VOL to unmute lt RECLIST CHILIST SUBTITLE REC LIST Record List CH LIST Display the programs list SVRIDVD SUBTITLE Turn on off the subtitle display in DTV mode REC and DVD mode Le C CD CD EPG To show the Electronic Program Guide during no menu state only in DTV mode gt D co REP Repeat playing the title or chapter A Load eject DVD disc PVR DVD REC Press to start record the program in DVB mode E Stop program 4 Previo
20. e If there is no disc in the DVD player the screen will show NO DISC Insert Disc according to picture next to disc slot Do not touch the playing surface Hold the disc around the outside with your fingers and place the disc into the slot The player will automatically draw the disc into the player To Eject the disc press the EJECT button on the TV or the 4 button on the remote control DVD Setup Mode e Setup Mode provides the menu for the configuration of General Setup Page Audio Setup Page Dolby Digital Setup Preference Page e Item selection in the Setup Menu is done by using the Navigation Arrows SETUP button and the OK button e Press the SETUP button first enter into SETUP menu then press the DIRECTION RIGHT button you can enter into the next Sub menu e Press the SETUP button again to exit the Setup Menu TV Display 4 3 Pan Scan This is selected when the DVD player is connected to a normal TV Wide screen images are shown on the screen but with some parts cut automatically 4 3 Letter Box This is selected when the player is connected to a normal TV Wide screen images are shown on the screen with black belt on the top and bottom e Wide This is selected when the player is connected to a wide screen TV 23 DVD Operation DVD Operation OSD Language This is used to select the OSD language Screen Saver Start the screen saver the screen saver image will appear when the player
21. isplay the playlist on the screen and you can select the photo by A V button and press OK button to program Press lt gt button to return to the options table Info Display the information of the photo Rotate Rotate the photo clockwise counterclockwise Zoom Out In Zoom out in the photo Move View Move the photo in Zoom in mode 2 Music Play the music Press lt gt button to select the option on the table and press OK button to change Press A V button to select the music and press OK button to program Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Goto Time Program the music form the time you set Press OK button to display the time table and select the position by lt gt A V_ button set the time by the number buttons select OK and press OK button to search Screen Saver Press BLUE button to enter the Screen Saver mode press again to exit 18 Multimedia Operation Multimedia Operation 3 Movie Play the movie 00 00 00 00 50 00 GS 1 p at Repeat 1 ayli nfo Step GOTO Time Zoom In Press lt gt button to select the option on the table and press OK button to change Repeat Select the repeat mode from Repeat All Repeat 1 Repeat None Set A B Select and play the preferable paragraph of the program by seting A and B at the beginning and end and there will be a sign on the left screen press OK button again to cancel Playlist Display the playlist
22. or household use and registered as harmless on electromagnetic waves e Therefore you can use it in every location as well as residential areas 31 Electric and electronic equipment and included batteries contains materials components and substances that can be hazardous to your health and the environment if the waste material discarded electric and electronic equipment and batteries is not handled correctly Electric and electronic equipment and batteries is marked with the crossed out trash can symbol seen below This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste but should be disposed of separately As the end user it is important that you submit your used batteries to the approriate and designated facility In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment All cities have established collection points where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites or be collected from the households Additional information is available at the technical department of your city ALL RIGHTS RESERVED COPY RIGHT DENVER ELECTRONICS A S CE www denver electronics com
23. osed to water or moisture anything accidentally penetrates the ventilation slots the set does not work normally Do NOT remove the safety covers There are no user serviceable parts inside You may invalidate the warranty Qualified personnel only are permitted to service this apparatus To avoid battery leakage remove exhausted batteries from the remote control handset or when not using for along period Do NOT break open or throw exhausted batteries on a fire Physical safety e Do NOT block ventilation slots in the back cover You may place the TV in a cabinet but ensure at least 5cm 2 clearance all around the unit e Do NOT tap or shake the TV screen you may damage the internal circuitry Take good care of the remote control do not drop it or allow it to come into contact with liquids e To clean the TV use a soft dry cloth Do NOT use solvents or petrol based fluids For stubborn stains you may use a damp soft cloth with diluted detergent Accessories amp Technical Specification Accessories en L User s Manual Remote control Batteries Converter cable AV cable for YPBPR video Note The configuration of the components may look different from the following illustration Technical Specification TV System PAL BG DK I SECAM BG DK L L Screen Size 26 inch diagonal Resolution 1366X768 Aerial input 75 QO unbalanced Audio output power 2x8W Power Consumption 100 240V 50 60Hz 50W
24. us chapter gt gt Next chapter Il Pause program p Play program 44 Fast reverse gt gt Fast forward INPUT Press to display the input source menu DISPLAY Press to display the current mode s information ze a ry a MENU System setup menu v l a EXIT Exit the OSD menu 2 a Ea FAV Display the favorite program list SCREEN NUMBER BUTTONS Ge Ge Press0 9 to select a TV channel directly when you are watching TV TV TXT CANCEL REVEAL manana o HOLD SIZE SUBPAGE INDEX Return to the previous channel viewed ED CURSOR KEYS a v 4 OK Allows you to navigate the on screen menus and adjust the system settings to your preference Remote Control POWER MUTE REC LIST CHILIST SUBTITLE PVR DVD CH4 v Scan through channels VOL4 wv Adjust the volume PICTURE Select the picture mode NICAM A2 TV Nicam A2 select SOUND Select the sound mode SLEEP Standby timer SCREEN Turn on off the screen TV TXT Turn off on the Teletext display CANCEL Cancel the Teletext display REVEAL Reveal any hidden text HOLD Hold or carry on the current subpage SIZE Press to see top half of page double size Press again to see the bottom half of page double size Press again for normal size SUBPAGE Press to enter subpages pressagain to cancel INDEX Go to index Colour buttons Short cuts follow the coloured links in the text PICTURE NICAMIA2 SETUP DVD system setup rat D M
25. y from your household waste Please dispose of this equipment at your local community waste collection recycling centre In the USA there are separate collection systems for used electrical and electronic products Please help us to conserve the environment we live in This unit complies with European safety and electrical interference directives Safety Information Safety Information To ensure reliable and safe operation of this equipment please read carefully all the instructions in this user guide especially the safety information below Electrical safety e The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor e To prevent overload don t share the same mains supply socket with too many other items of equipment Do not place any connecting wires where they may be stepped on or tripped over Do not place heavy items on the leads which may damage them Hold the Mains plug not the wires when removing from a socket During a thunderstorm or while leaving the TV for long periods disconnect the aerial if outdoor and mains adaptor from the supply Do not allow water or moisture to enter the TV or mains adaptor Do NOT use in wet or moist areas such as Bathrooms steamy kitchens or near swimming pools e Pull the plug out immediately and seek professional help if the mains plug or cable is damaged liquid is spilt onto the set or if it is accidentally exp
Download Pdf Manuals
Related Search