CD/DVD Multi-target Instruction Manual (Rough Draft)
Contents
1. 44 48 52 56 default MAX The speeds for DVD are 1 2 2 4 4 6 8 10 12 16 18 20 default MAX gt AJ or v to select ENT gt CD Read and press gt 3 gt A or v to select DVD read speed and press ENT to finish gt Ajor y to select Eject All No Eject Eject Target Eject Source and press ENT to confirm 10 Compare Speed Sets the speed at which the master disc is compared with the copies disc s The speeds for CD are 1 2 4 8 10 12 16 20 24 32 36 40 default 44 48 52 56 MAX The speeds for DVD are 1 2 2 4 4 6 8 12 16 default 18 20 MAX gt Press gt A or v to select CD Compare gt Speed and press gt 5 gt A or v to select DVD Compare speed and press ENT to finish 11 Change Bad Master Allows the changing of the master disc during duplication when there is an uncorrectable error on the master disc s that threatens to disrupt the copy process gt pess gt A or v to select mode and press ENT to confirm 12 CD Overburn Allows the copying of CDs that have been burned over their maximum capacity The target disc s must be the same capacity as the master disc 12 gt Press gt A or v to select mode and gt press ENT to confirm 13 Copy CD TEXT Allows the copying of the CD TEXT on the master disc s to the target disc s gt Press gt A or N to select mode and gt press to confirm 14 Show HDD Image Allow2. Compare etc 4 Display Mode Changes the display readout during the performance of various commands The Basic mode displays a progress bar along with the amount of total data in MB on the master DVD or in time for the master CD The Expert mode displayed the percentage of the process completed the amount of data transferred and the total amount of data on the master disc pess gt A or v to select mode and press to confirm 5 Button Beep Turns the audio signal a beeping sound ON or OFF for pressing of the buttons 6 Skip Read Error Allows the duplicator to skip uncorrectable read errors on the master DVD or CD This feature can be turned ON or OFF gt A or v to select seconds and press ENT to confirm gt Ajor v to select seconds and press ENT to confirm gt Ajor y to select function and press ENT to confirm gt A or v to select mode and press ENT to confirm 11 gt A or v to select mode and press ENT to confirm 7 Eject On Start Allows the drive s with disc s present inside to eject the disc trays when the duplicator is done initializing 8 Show Copy Time Allows the display of total time taken for the copy process to be complete E 3 pess gt AJ or to select mode and press ENT to confirm 9 Reader Speed Sets the reader speed for the duplicator to read the master disc s The speeds for CD are 1 2 4 8 10 12 16 20 24 32 36 40
3. Read Error Enables the option to halt the duplication process if there is an error on the master disc Disables the option to allow the process to continue with the same errors as the master disc 11 7 Eject on Start Allows the duplicator to eject disc tray s with disc present inside upon boot up 11 8 Show Copy Time Enables or disables the copy time to be displayed when the copy process is finished Also allows for the various other timed functions to display the completion time 11 9 Reader Speed Sets the speed at which discs are read during various processes 11 10 Compare Speed Sets the speed at which the compare process is executed 11 11 Change Bad Master Enables or disables changing of a master disc during the copy process when an error is detected on the master disc 11 12 CD Overburn Enables or disables the duplication of overburned CDs 11 13 Copy CD TEXT Enables or disables the copying of the CD subcode CD TEXT information for audio CDs 11 14 Show HDD Image Allows the image name to be displayed on the LCD screen when selecting the Name HDD as the source drive IMAGE MANAGER The management for various functions of the hard disk drive HDD Note For this function and submenu to be displayed a HDD must be installed in the duplicator 12 1 Select Image Selects an image file as a source to be copied to the discs 12 2 Disc Image Loads an image to the HDD from a master CD or DVD as an Image file 12 3 Set Reader Speed Set
4. Use the Scroll buttons to select Edit Track 2 Close Disc Press the ENT button The target disc s will now be finalized and closed for completion Once completed the disc s will be automatically ejected This concludes the Edit Track process gt A or v and press to select tracks 3 _ gt Repeat steps for next gt bai Fer ana master or press A or y and SERAS to close discs gt gt E an Note A copied audio CD must be closed finalized before it can be played back gt Finish and eject disc a Once all tracks to be copied have been selected press v to select OK on the display Press to confirm and begin the copy process b Once the track selection is entered the LCD screen will read Copying Audio Tracks and display the track number total time of current track and the current copying status c Once the copy process is completed the LCD screen will display the total number of tracks on target CD s total time used and total time remained d Repeat the track selection and copy process until all desired tracks have been copied to target disc s Proceed with disc closing process Note Once disc closing process is performed no more track s can be added to target CD s 10 Utility This command contains various tools to check functionality of the drive s information of the components and other system information 1 Prescan Prescans the master disc and v
5. as disc type amount of data on disc for master disc s in MB and media book type For blank media displays the media book type available soace and speed of the media 10 6 Drive Displays information of all aa in the duplicator including the Reader HDD if a Ee and Writer drive s 10 7 System Info Displays the duplicator controller information such as the hardware version buffer memory and currently loaded firmware 10 8 Update BIOS Updates the firmware for the controller Note Please make sure that the firmware is approved by the manufacturer and compatible with the duplicator before performing the update 10 9 Copy Count Counts the number of successful and failed copies of CD and DVD made by the duplicator 11 1 Power On Time Sets system warm up time from 5 sec to 99 sec Default is 15 seconds 11 2 Auto Start Sets auto start time from OFF no auto start to 99 sec Allows the duplicator to automatically start one of six following functions once the master disc and desired number of target disc s are inserted and the drive trays are closed Copy Test Copy amp Verify Copy 4 Compare Verify and Compare 11 3 Startup Menu Assigns a command to be displayed first after the duplicator has been initialized 11 4 Display Mode Sets the amount of information displayed on the LCD during the performance of various functions 11 5 Button Beep Enables or disables the audio feedback when buttons are pressed 11 6 Skip
6. copies being made the image is also being created and stored in the TEMP directory on the HDD gt Press ESC to exit gt Press Image Manager to confirm gt and go back to main menu gt A or to gt Start copying to 3 target disc s and loads image into HDD at the same time gt Ejects copies and in TEMP 3 c OFF Disables the load and copy function No temporary image is loaded to the HDD during the copy process gt press ENT to binogs Manager gt press gt CI confirm choice gt gt press ESC to exit gt Image Manager and move A v to select from main menu Special Feature DiscLock CD DVD duplication The DiscLock feature implements a simple encryption protocol on your copied discs so they cannot be copied in another duplicator Protect your copies and your investmet from unauthorized duplication with the DiscLock feature in the Spartan Fortress Duplicator How to Enable the DiscLock Feature Power on the duplicator if not already on Use the Scroll buttons to select 12 Enable DiscLock from the Main Menu Press the ENT button Note If there is a HDD present in your duplicator this feature will be 13 instead of 12 This enables the DiscLock feature gt Press ENT to load disc and enable DiscLock gt Note The DiscLock feature will work for DVD R only DVD R and CD formats are not supported at this time but may be supported with a fi
7. DPANBZ IAN FORTRESS CD DVD Duplicator System Version 1 80 TABLE OF CONTENTS Introduction 1 e Setup 11 o Rename Image 15 Specifications 1 o Power on Time 11 o Delete Image 15 LCD Front Panel Overview 1 o Auto Start Time 11 o Show HDD Info 16 Menu Overview 2 3 o Start up Menu 11 o Format HDD 16 Functions 4 o Display Mode 11 o Load and Copy 16 e Copy 4 o Button Beep 11 e DisckLock 17 e Test 4 o Skip Read Error 11 o Enable DiscLock 17 e Copy amp Verify 5 o Eject on Start 12 o DiscLock Copy 18 e Copy amp Compare 5 o Show Copy Time 12 o Set Burn Speed 18 e Verify 6 o Reader Speed 12 o Select Source 18 e Compare 6 o Compare Speed 12 o Utility 19 e Set Burn Speed 7 o Change Bad Master 12 o Setup 19 e Select Source 7 o CD Overburn 12 o Set Burn Speed 19 e Edit Track 8 o Copy CD Text 13 o Disable DiscLock 19 e Utility 9 o Show HDD Image 13 Basic Troubleshooting 20 o Prescan 9 o Boot Password 13 o Quick Erase 9 o Setup Password 13 o Full Erase 9 o Language 14 o Eject All Discs 9 o Clear Setup 14 o Disc Info 10 e Image Manager 14 o Drive Info 10 o Select Image 14 o System Info 10 o Disc gt Image 14 o Update BIOS 10 o Set Reader Speed 15 o Copy Count 10 o Show Image Info 15 Introduction Thank you for purchasing the standalone Spartan Fortress CD DVD Duplicator This system is specifically engineered to copy CD and or DVD withou
8. Use the scroll buttons to select the command 6 Compare and press the ENT button The drives will automatically close trays and begin the compare process 5 Once the compare process is complete the trays will eject the discs that have passed the compare process gt Press to i load discs gt gt Finish gt gt start and eject comparison gt diec 7 Set Burn Speed This feature allows you to set the burn speed of various types of disc general CDs data and VCDs audio CDs DVDs and dual layer DVDs DVD DL gt Analyzing source disc gt Selectable burn speeds CD 1 2 4 8 10 12 16 20 24 32 36 40 default 44 48 52 56 MAX Audio CD 1 2 4 8 10 12 16 20 24 default 32 36 40 44 48 52 56 MAX DVD 1 2 2 4 4 6 8 default 12 16 18 20 MAX DVD DL 1 2 default 2 4 4 6 8 12 16 18 20 MAX To Set the Burn Speed 1 Power on the duplicator if not already on 2 Use the Scroll buttons to select 7 Set Burn Speed Press the ENT button 3 The first soeed selection is for general CDs Use the Scroll buttons to select the desired burn speed and press the ENT button 4 The second speed selection is for audio CDs Use the Scroll buttons to select the desired burn speed and press the ENT button 5 The third speed selection is for DVDs Use the Scroll buttons to select the desired burn speed and press the ENT button Note The selection is only available
9. Verify and press the ENT button The drives will automatically close trays and begin the copy process Once the copy process is completed the tray s will open briefly and then automatically close again to begin the verify process Once the verify process is completed the trays will automatically eject discs that have passed the Copy amp Verify process gt Analyzing E 3 Press to load disc gt source disc gt Copy completed n i gt and start Verify gt le gt Finish and eject discs 4 Copy amp Compare This command will perform the copy process and immediately follows with a comparison between the master disc and the copied disc s to ensure the copies are exact duplicates of the master disc This command is especially useful for DVDs data CDs and video CDs Note The Compare process is a bit by bit comparison between the master disc and the copied discs This operation ensures that all of the copies are completely identical to the Master disc This command is not applicable to audio CDs To start the Copy amp Compare process 1 Zi Power on the duplicator if not already on Eject disc tray of the Source Drive and place the master disc in the designated Source Drive usually the top The master disc is the original of which copies are made Eject disc tray s of the Writer Drives and place blank disc s on the tray s Number of drives used depends on number of copies desired I
10. anese gt Press A v to Image Manager HDD required This command is for the management of the hard disk drive HDD installed in the duplicator such as information and image s stored on the HDD Please refer to the Image Manager section of this manual for details Note This feature is only available on duplicators with a HDD installed If there is no HDD present in the duplicator this feature will NOT show in the menu of commands Disable DiscLock Disables the DiscLock feature so the copies will remain in their original state No protection will be implemented on the copies discs The menu will go back to its original list of commends and setting Note if there is no HDD present this feature will be 6 instead of 7 gt Press ENT to disable DiscLock and return to the normal menu 3 19 Basic Troubleshooting Follow these simple steps for quick and proper troubleshooting 1 Power does not turn on or unit receives no power a Check power cord and outlet to make sure power connections are secured b Check voltage switch on the back of the duplicator to make sure power supply is set for correct outlet rating c Test with another power cord same as a PC power cord to eliminate cable failure Master disc cannot be read a Change the master disc The master disc may be of poor quality or with error s that can make duplication difficult or impossible b Remake the master disc on another disc Mas
11. cording to the installation sequence If there is no HDD installed then the Reader Drive is automatically set as Drive 1 e Note The DiscLock feature is only available for DVD to DVD disc to disc copying The HDD to disc copying cannot support this feature as the HDD cannot be used in conjunction with the DiscLock feature gt Press A v to select gt 18 Utility This command contains various tools such as Pre Scan the checking of the drive and controller information firmware revisions etc Please refer to the Utility section of this manual for details Setup This command contains options to configure the duplicator system The Setup menu is truncated when the DiscLock feature is enabled The three functions available under the DiscLock Setup menu are as followed 1 Auto Start Time Set the amount of time before the duplicator will automatically start Note When the DiscLock feature is enabled the master disc plus at least one blank disc must be placed in the duplicator accordingly before the duplicator can perform Auto Start gt A or v to set gt Press 3 Es on and press ENT to confirm 2 Button Beep Turns the audio signal a beeping sound ON or OFF for pressing of the buttons gt A or v to select 3 Press gt gal mode and press ENT to confirm 3 Language Sets the language selection of the display Available languages are English default Spanish Portuguese and Jap
12. drives used depends on number of copies to be verified It is not necessary to always use all drives 4 Use the scroll buttons to select the command 5 Verify and press the ENT button The drives will automatically close trays and begin the verify process 5 Once the verify process is complete the trays will eject the discs that have passed the verify process 5 Ea lege alg Pam 3 Analyzing source disc 3 _ XX _ gt Finish gt Eo gt Start verification gt aie and eject discs 6 Compare This command compares copied disc s to the master disc and ensures that the copies are exact duplicates of the master disc This command is especially useful for DVDs data CDs and video CDs Note The Compare process is a bit by bit comparison between the master disc and the copied discs This operation ensures that all of the copies are completely identical to the Master disc This command is not applicable to audio CDs To start the Compare process please follow the instructions below 1 Power on the duplicator if not already on 2 Eject disc tray of the Source Drive and place the master disc in the designated Source Drive usually the top The master disc is the original of which copies are made 3 Eject disc tray s of the Writer Drives and place copied disc s to be compared on the tray s Number of drives used depends on number of copies to be compared It is not necessary to always use all drives 4
13. e presence of data on the copied disc s to ensure readability of the copied disc s COPY amp COMPARE Copies the master CD DVD and then immediately follows the copy process with a bit for bit comparison between the master disc and copied disc s to ensure exact duplication Note The Compare function cannot be used with audio CDs VERIFY o the presence of data on the copied disc s to ensure that the copied disc s can be read back KI COMPARE Performs a bit for bit comparison between the master disc and copied disc s SET BURN SPEED Allows the speed settings to be changed for various formats SELECT SOURCE Allows the source drive to be changed to any of the available drives in the duplicator including the Hard Disk Drive HDD TRACK EDIT Allows for the selection of individual track s from different master audio CDs to create custom compilation 9 1 Copy Track Allows the selection of individual track s from the master CD and copies the selected track s onto all target discs 9 2 Close Disc Closes the target discs when all of the track s are burned on to all target discs Note The copied disc s will NOT play back without this step Do NOT skip this step 9 3 Disc Info Displays the information regarding the track s on the disc s and how much ec is remaining on the target disc s UTILITY the master disc can be copied in the duplicator 10 5 Disc Info Displays basic information of the discs inserted such
14. elect the character desired Press ENT to go to the next position There are a total of 6 positions for the password To enable the password set all 6 positions For space press without choosing a character to leave the position empty Press ESC to cancel the process The duplicator will ask for password when 11 Setup is selected 17 Language Sets the language selection of the display Available languages are English default Spanish Portuguese and Japanese gt 3 Press gt A or v to select language and press ENT to confirm 18 Clear Setup Resets the duplicator controller back to factory default settings gt Press gt ee gt Press ENT to clear all settings 12 Image Manager This command is for the management of the hard disk drive HDD installed in the duplicator Note This feature is only available on duplicators with a HDD installed If there is no HDD present in the duplicator this feature will NOT show in the menu of commands 1 Select Image Allows the selection of the image s present on the HDD The Scroll buttons cycle through the image s on the HDD and the ENT button confirms the selection while the ESC button cancels the selection The image s are listed in order of which they were loaded 2 Disc gt Image Transfers the information from the master CD DVD to the HDD After the image s transfer is complete the reader drive is ejected and the source drive is changed to the HDD
15. erifies the integrity and quality of the master disc a Select Utility and press to enter the sub menu b Select 1 Pre scan and press ENT gt gt Finish Prescan gt 2 Quick Erase Performs a quick erase of rewritable RW media for next use Note Do NOT perform this function on recordable R media gt Insert re writable gt Finish Quick Erase discs and press ENT and eject discs Note If the display shows O o blinking Erasing is in progress If the display shows F f blinking DVD RW Disc Formatting is in progress 3 Full Erase Performs a full erase and format of rewritable RW media for next use Note Do NOT perform this function with recordable R media gt Insert re writable disc gt Finish Full Erase and press ENT and eject discs Note If the display shows O o blinking Erasing is in progress If the display shows F f blinking DVD RW Disc Formatting is in progress 4 Eject All Discs Performs a simultaneous ejection of all of the optical disk drive s on the duplicator EC gt Press gt All disc trays will open 5 Disc Info Checks the capacity and space used on the disc s inside of the drive s of the duplicator gt Press gt 6 Drive Info Checks the make model firmware and the channel port of the drive s that are connected to the duplicator controller gt Press AJ or v to select gt Press gt different Driv
16. es 7 System Info Checks the model number buffer memory and firmware version of the duplicator controller gt Press ENTS 8 Update BIOS Updates the BIOS firmware of the duplicator controller gt Insert update CD gt Update completed and gt Re boot system eject disc gt 9 Copy Count Tracks the numbers of successful and failed copies made by the duplicator for both CDs and DVDs There are three 3 parts of this tool Show Count to display current copy counter Enable Counter to turn the counter on or off and Reset Counter to clear counter 1 Show Count 2 Enable Count 3 a gt A or v and press to select choice 3 Reset Counter 10 gt Press to confirm or press to cancel 3 11 Setup This command contains options to configure the duplicator system 1 Power On Time Set the amount of time the duplicator controller counts down before initializing the system The default is 15 seconds The time can be set from 5 to 99 seconds in 1 second increments 5 6 7 97 98 99 2 Auto Start Time Set the amount of time before the duplicator will automatically start the selected command ranging from OFF no auto start to 99 seconds in 1 second increments 1 2 3 97 98 99 3 Start up Menu Sets the command to be displayed first when the duplicator is powered on and initialized All primary commands are available to be set for Start up Copy Test Copy 8 Verify Copy amp
17. ess the ENT button The drives will automatically close trays and begin the test process 4 5 Once the test process is complete the disc trays will eject and the display will read Test Result Pass X Fail Y with X being the number of discs that passed the test and Y being the number of failed copies Use discs that have passed the test for the actual duplication 2 Press to load gt Analyze source disc gt disc and execute Test gt Finish and eject discs 3 Copy 8 Verify This command will perform the copy process and immediately follow with a verification process on all target discs This command is especially useful for audio CD duplication Note The verification process uses a Disc Readability Check to individually check the presence of data on each copy This process does not compare the contents of duplicated discs against that of the master It only verifies that the duplicated discs are readable To start the Copy amp Verify process 7 2 Power on the duplicator if not already on Eject disc tray of the Source Drive and place the master disc in the designated Source Drive usually the top The master disc is the original of which copies are made Eject disc tray s of the Writer Drives and place blank disc s on the tray s Number of drives used depends on number of copies desired It is not necessary to always use all drives Use the scroll buttons to select the command 3 Copy amp
18. gt Al or v to select image and press ENT to confirm gt Press ENT gt The source disc loaded to HDD as image file A001 3 14 gt ia Note The Source Disc may be placed in the Reader Drive or any of the Writer Drives 3 Set Reader Speed Change the read speed load speed for the HDD The speeds for CD are 1 2 4 8 10 12 16 20 24 32 36 40 44 48 52 56 default MAX The speeds for DVD are 1 2 2 4 4 6 8 10 12 16 18 20 default MAX ta 2 Press gt Aj or v to select CD Read Speed and press ENT to confirm gt magan gt A or v to select DVD Read Speed and press ENT to confirm 4 Show Image Info Shows the image number in sequential order the file name of the image stored on the HDD the type of image stored and the amount of data the image contains in MB for DVD or time for CD a p DVD disc image of 3 875GB as file A001 gt A or v AG select image and Alor kio ENT to display info CD disc image of 65 min 28 sec as file A003 5 Rename Image Renames the image instead of using default file names A001 A002 etc Up to 8 characters gt Press ENT gt gt Select the image file to be renamed and press gt C gt A or N to select character Press to go to the next position gt gt gt Press to confirm 3 There are 8 characters for each image name No empty space allowed in the image file name Press ESC to cancel
19. of copies desired It is not necessary to always use all drives 4 Use the scroll buttons to select the command 1 Copy and press the ENT button The drives will automatically close trays and begin the copy process 5 Once the copy process is completed the disc trays will eject and the display will read Copy Result Pass X Fail Y with X being the number of successful copies and Y being the number of failed copies To reduce copy failure please refer to the troubleshooting section of the manual gt Press to load CG disc and execute Copy Ba gt Analyze master disc gt gt gt ine ome Casa 2 Test This command will simulate the copy process and make sure all target discs are usable The test process does NOT burn anything to the blank disc s A built in diagnostic algorism is used to verify the chance of successful copy for each target disc gt Finish and eject discs gt Start copying gt To start the Test Process 1 Power on the duplicator if not already on 2 Eject disc tray of the Source Drive and place the master disc in the designated Source Drive usually the top The master disc is the original of which copies are made 3 Eject disc tray s of the Writer Drives and place blank disc s on the tray s Number of drives used depends on number of discs to be tested It is not necessary to always use all drives 4 Use the scroll buttons to select the command 2 Test and pr
20. on DVD duplicators 6 The last speed selection is for DVD DL Use the Scroll buttons to select the desired burn speed and press the ENT button Note The selection is only available on DVD duplicators 8 Select Source This command will allow you to change the source drive to any one of the drive s inside the unit including the HDD if installed To change the source drive inside the unit to a different drive gt Press amp gt Alor v and press to set or v gt general data CD burning speed 3 gt SS gt Aj or v and press to set audio CD burning speed 3 gt Al or v and press to gt Finish and return 2 set DVD burning speed gt to main menu 1 Power on the duplicator if not already on 2 Use the Scroll buttons to select the 8 Select Source Press the ENT button 7 5 The current Source Drive will be displayed along with the partial model number of the drive and the port number in brackets Use the Scroll buttons to select from other available drives until the port number of the desired drive is displayed Press the ENT button The desired drive will then become the Source Drive gt Display current Source Drive setting gt gt Alor v to select drive Erdy gt Press to finish Setting 9 Edit Track This command allows users to select tracks from multiple audio CDs and burn to target CDs This command also closes edited audio CDs and displays the disc information To c
21. port switch and make sure the switch is in the OFF position before duplicator power is turned on b If a disc is stuck inside a drive insert a paper clip or safety pin in the pinhole underneath the drive door and push gently Make sure the power is OFF during this step Then press the EJECT button of the drive a few times to test the disc tray The blank CD or DVD is not recognized in the writer drive s a Test the blank disc in another writer drive A faulty writer drive will not recognize blank discs b Change the blank disc to another disc A defective blank disc will not be recognized by the writer drive c Change the brand of media or media type Certain types of media may not be compatible with the drives Poor quality media can also cause high failure rate Copyright 2008 All rights reserved 20
22. reate and copy custom compilation audio CDs from multiple master discs 1 a a SUD 10 11 Power on the duplicator if not already on Use the Scroll buttons to select 9 Edit Track Press the ENT button The display will read Edit Track 1 Copy Track Press the ENT button The display will read Waiting Master Disc Insert the first master disc and press the ENT button Once the master disc is successfully read the display will read Waiting Blank Disc Insert blank disc s into writer drive s and press the ENT button The number of tracks on the master CD will be displayed on the lower half of the screen Use the Scroll buttons to select track s to be copied In alphabetical order a lower case letter will be assigned to the tracks selected Once the selection of tracks is finished use the Scroll buttons to select OK at the end of the numeric listing of tracks Press the ENT button The duplicator will begin copying the selected track s to the target CD s Once the copy process is completed the display will read the number of tracks that are currently on the target CD s time used on the target CD s and time left free spaces Press the ENT button The display will now read Edit Track 1 Copy Track If tracks from a different master CD are desired press the ENT button and repeat steps 4 through 8 for each different master CD If selection of tracks is completed proceed to step 10
23. rmware revision in the future 17 In order for the DiscLock Feature to be successfully implemented on your DVD R discs 40 MB of free space must be allocated on the blank DVD R discs 5 The DiscLock feature is only used for DVD to DVD disc to disc copying The HDD to disc copying cannot support this feature as the HDD cannot be used in conjunction with the DiscLock feature This feature is only for the DVD Video format only DVD Data and other formats are not supported at this time but may be supported with a firmware revision in the future The menu options are as followed when the DiscLock feature is enabled 1 DiscLock Copy The DiscLock copy function is the copy function with the DiscLock protection protocol to be implemented on the copied disc s gt Press ENT to load gt Analyzing copying gt gt Finished and gt Start Copying gt eject discs 2 Set Burn Speed This feature allows you to set the burn speed of DVD with DiscLock feature implemented 1 2 2 4 4 6 8 12 16 18 20 MAX 3 Select Source This command will allow you to change the source drive to any one of the drive s inside the unit including the HDD if installed The DVD ROM drive is the default source drive ME gt Press ENT io nisn sting e Note If HDD was selected as Source then follow the instructions on Select Image to select specific image files as your reading source e Note Each drive will be assigned a Drive ac
24. s the option to display the name of the HDD image name default or the image size in MB gt Prose gt A or y to select Image ENT gt Name Capacity and press to confirm 15 Boot Password Sets password protection for the duplicator before the boot up process can be started The boot password prevents anyone unauthorized from using the duplicator system gt Press gt Aj or v to select mode and 3 press ENT to confirm If Disable is selected no password will be set and the display will direct back to the Setup sub menu If Enable is selected a password must be entered using the following guidelines Use AJ or v to select the character desired Press ENT to go to the next position There are a total of 6 positions for the password To enable the password set all 6 positions For space press without choosing a character to leave the position empty Press ESC to cancel the process The duplicator will ask for password when the unit is restarted 16 Setup Password Sets password protection for the duplicator before the setup settings can be altered The setup password prevents unauthorized changes to the system gt Press gt Aj or v to select mode and press ENT to confirm 13 If Disable is selected no password will be set and the display will direct back to the Setup sub menu If Enable is selected a password must be entered using the following guidelines Use A or v to s
25. s the speed of data loading from the master CD DVD to the HDD 12 4 Image Info Displays the image file information such as image order name file size and type of image 12 5 Rename Image Renames the HDD image partition name up to 8 characters 12 6 Delete Image Deletes an image file in HDD Note A file selected as the source file cannot be deleted until a different image is selected See 12 1 12 7 HDD Info Displays the information in HDD such as the number of discs stored on the HDD and the amount of space left in the HDD 12 8 Format HDD Formats the HDD erasing ALL data stored on the HDD 12 9 Load 4 Copy Allows an image to be loaded onto the HDD from a master CD or DVD and automatically copied on to the target disc s Select from 3 modes Synchronous Load First and Off Functions 1 Copy This command will copy the master disc placed in the designated Source Drive to all target discs in the Writer Drives This process burns all information contained on the master disc to the target discs so the copies are exact duplicates of the master disc To Start the Copy Process Power on the duplicator if not already on 2 Eject disc tray of the Source Drive and place the master disc in the designated Source Drive usually the top The master disc is the original of which copies are made 3 Eject disc tray s of the Writer Drives and place blank disc s on the tray s Number of drives used depends on number
26. t additional computer or processing unit With a simple four button interface and a LCD screen to display menu commands and real time status the Spartan Fortress CD DVD Duplicator provides a fast and reliable solution for CD and DVD duplication up to 11 targets from one single master disc Operating Environment Temperature Working Temperature 0 C 60 C 32 F 140 F Storage Temperature 20 C 85 C 4 F 185 F Humidity Working Humidity 20 80 a Storage Humidity 5 95 LCD Front Panel Overview ENT Button ENTER Scroll Button UP DG dORTRESS Scroll Button DOWN Control Buttons There are 4 control buttons A v Up Backward To navigate backward in the menu LCD Screen Down Forward To navigate forward in the menu ENT Enter OK Execute the function ESC Escape Cancel Go back to the previous level in the menu Menu Overview Below is a quick reference chart of the functions available on all models of Spartan Fortress CD DVD Duplicators After the drives are successfully installed user may access the menu functions by powering on the system COPY Copies the master CD DVD All contents of the master disc will be duplicated on to all target disc s simultaneously TEST Simulates the copy process but no data is recorded onto the blank disc s Note Test mode can only be done with DVD R and CD R media only 3 COPY 8 VERIFY Copies the master CD DVD and then verifies th
27. t is not necessary to always use all drives 5 4 Usethe scroll buttons to select the 4 Copy 4 Compare command and press the ENT button The drives will automatically close trays and begin the copy process 5 Once the copy process is complete the tray s will open briefly and then automatically close again to begin the compare process 6 Once the compare process is completed the trays will automatically eject discs that have passed the Copy amp Compare process gt Press to gt Analyzing load disc gt source disc gt Copy completed i Lu i gt and start Compare 3 Es gt Finish and eject discs 5 Verify This command verified readability on the master disc and or all target discs This command is especially useful for audio CD duplication Note The verification process uses a Disc Readability Check to individually check the presence of data on each copy This process does not compare the contents of duplicated discs against that of the master It only verifies that the duplicated discs are readable To start the verify process please follow the instructions below 1 Power on the duplicator if not already on 2 Ejectdisc tray of the Source Drive and place the master disc to be verified in the designated Source Drive usually the top The master disc is the original of which copies are made 3 Eject disc tray s of the Writer Drives and place copied disc s to be verified on the tray s Number of
28. ter disc may be of poor quality or with error s that make duplication difficult or impossible c Change the source drive to one of the other drives to test d Make sure the master disc is finalized in standard ISO format High failure rate a Change the media type Certain types of media may not be compatible with the drives Poor quality media can also cause high failure rate b Lower the burn speed and attempt another copy process Lowering the speed increases the stability of the duplication process c Check for available firmware updates for the unit A firmware update may resolve any unspecified issues Duplicator locks up during the copy process a Hold down the ESC button to abort the copy process The copy process will cancel and menu goes back to the last function executed b If the button cancel does not work power cycle the unit power the unit off leave off for five seconds and power the unit back on c Change the master disc A master disc with error s or a poor quality master disc can cause duplication to lock up at particular points during the copy process Button s do not function on the unit a The duplicator may be busy Buttons pressed while the duplicator is processing will not perform functions unless otherwise specified b Possible faulty button Contact your technical support department for further information One of the drives does not open and or LED does not light up a Check USB and or Firewire
29. the process 6 Delete Image Deletes the image s from the HDD and reclaims the space occupied by the image on the HDD gt Press gt Select the image file 3 to be deleted 3 gt Press gt Delete Image completed gt Repeat to delete more images 7 Show HDD Info Shows the amount of used and free images available on the HDD in both CD and DVD formats 8 Format HDD Deletes and formats all image s on the HDD restores the HDD to factory defaults and initializes the HDD for use with the duplicator gt Press ENT to gt Press again to formatting gt 9 Load and Copy There are three 3 modes in this function gt gt Pross gt A or v to select between First and press ENT to confirm a Load First Completes loading of the image s to the HDD before automatically begins the copy process from the image stored on the HDD to all target disc s Image s are loaded one at a time and copied to the Writer Drives with blank disc s ready The image s are stored in a TEMP partition on the HDD gt Press ESC to exit gt Press Image Manager to confirm gt and go back to main menu gt or v to select 1 Copy gt ail ci gt Loads master disc 100 then start copy gt Complete copying gt from HDD file to target Pia discs gt 16 L b Synchronous Loads the image at the same time while the duplicator is making copies from the master disc to the blank discs As the
Download Pdf Manuals
Related Search