Ilumipanel 180 IP Optic 15/30 RGB User Manual Rev. 3
Contents
1. Ilumipanel 180 IP Optic 15 30 RGB User Manual Edition Notes Edition Notes E j ip nmi DN DATA ILOINVININAROG I K e E W B 1 S Rec The Ilumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 covers the description safety precautions installation programming operation and maintenance of the Ilumipanel 180 IP Optic 15 30 RGB ILUMINARC released this edition of the Ilumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 in November 2015 Trademarks The ILUMINARCS 1ogo the ILUMINARC name and all other trademarks in this document related to services or products by ILUMINARC are trademarks owned or licensed by ILUMINARCS its affiliates or subsidiaries Any other product names logos brands company names trademarks featured or referred to within this document are the property of their respective trademark holders Copyright Notice The entire content of this document except where applicable and unless otherwise noted is solely owned by ILUMINARC a wholly owned trademark of Chauvet amp Sons Inc Copyright 2015 ILUMINARC All rights reserved Electronically published by ILUMINARC in the United States of America Manual Usage ILUMINARC authorizes its customers to download and print this manual for professional information purposes only ILUMINARC expressly prohibits the usage copy storage distribution modification or printing of this manual or its content for any other purpose without2. based on variances in color output intensity and the frequency at which the semiconductor operates ILUMINARCO strives to hold its LED manufacturers to the highest standards of binning to optimize consistency in output from product to product However the availability of a single bin cannot be guaranteed With that in mind ILUMINARC has developed a rigorous control system to seek the best achievable consistency in color and output Color Rendering Index CRI CRI is an industry standard method to compare properties of different types of light sources There are known limitations and inconsistencies related to CRI Results may vary depending on the environmental factors involved For this reason the U S Department of Energy DOE states that CRI should be considered as one point of reference among others in evaluating white LED products and systems The following is an excerpt of recommendations from the DOE 1 Identify the visual tasks to be performed under the light source If color fidelity under different light sources is critically important for example in a space where color or fabric comparisons are made under both daylight and electric lighting CRI values may be a useful metric for rating LED products 2 CRI may be compared only for light sources of equal correlated color temperature This applies to all light sources not only to LEDs Also differences in CRI values of less than five points are not significant e g light
3. CSAC22 2 No 166 c US tE113093 23 ILUMINARC LUMINARC
4. Follow their instructions to request support or to return a product Visit our website for contact details llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 ATT d H l By DA m n m aq Il LININAFI wit V A D L a Ly E Technical Specifications Technical Specifications Dimensions and Length Width Height Weight Weight 28 6 in 728 mm 9 9 in 252 mm 21 0 in 533 mm 89 Ibs 40 3 kg Note Dimensions in inches rounded to the nearest decimal digit Electrical Power Supply Type Range Voltage Selection Switching internal 100 240 V 50 60 Hz Auto ranging Parameter 120 V 60 Hz 230 V 50 Hz Consumption 592 W 4 7 A 561 W 2 5 A Power I O Input Output Connectors Hard Wired N A Cord plug Open Wire N A Light Source Type Power Lifespan LED 5W 50 000 hours Color Quantity Current Red 60 700 mA Green 60 1 000 mA Blue 60 1 000 mA Photometrics Parameter 30 Optics 15 Optics Illuminance 5 m 1 696 Ix 6 377 Ix Beam angle Pl 10 0 Field angle 39 4 19 9 Thermal Max External Temperature Cooling System Fan assisted convection 104 F 40 C via Integrated Cooling Enhancement M DMX UO Connectors Connector Type Channel Range Open Wire N A 1 3 4 6 7 Ordering Product Item Number Item UPC Ilumipanel 180 IP Optic 15 30 RGB 01620437 781462207892 Ilumipanel 180 IP Optic 15 RGB 01620435 781462207878 Ilumipanel 180 IP Optic 30 RGB 01620436 781462207885 llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 i UL 1573 D
5. fire N the llumipanel 180 IP Optic 15 30 RGB to a rheostat variable resistor or dimmer circuit even if the rheostat or dimmer channel serves only as a 096 to 10096 switch AN connect the llumipanel 180 IP Optic 15 30 RGB to a power line with the proper voltage and frequency as per the specifications in this manual or on the product s sticker Never connect Make sure to The listed current rating indicates the maximum current draw during normal operation D bury the power or signal distribution boxes make sure that they are IP67 rated or greater If you choose to llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 Installation AC Power The Ilumipanel 180 IP Optic 15 30 RGB has an auto ranging power supply that can work with an input voltage range of 100 240 VAC 50 60 Hz Make sure that you are connecting this product to the proper voltage as per the specifications in this User Manual or on the product s sticker Power Consumption To determine the power requirements for the Ilumipanel 180 IP Optic 15 30 RGB refer to the label affixed to the side of the product Alternatively you may refer to the Technical Specifications The listed current rating indicates the maximum current draw during normal operation AC Plug The Ilumipanel 180 IP Optic 15 30 RGB comes with a bare ended power input cord for hardwire installation Use the table and the illustration below to wire a plug Connec
6. its written consent Document Printing For better results print this document in color on letter size paper 8 5 x 11 in double sided If using A4 paper 210 x 297 mm configure your printer to scale the content of this document to A4 paper Intended Audience Any person in charge of installing operating and or maintaining the Ilumipanel 180 IP Optic 15 30 RGB should read all of both the guide that shipped with it and this User Manual before installing operating or maintaining this product Disclaimer ILUMINARC believes that the information contained in this manual is accurate in all respects However ILUMINARC assumes no responsibility for any error or omissions in this document ILUMINARCS reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of ILUMINARC to notify any person or company of such revision or changes This does not constitute in any way a commitment by ILUMINARC to make such changes ILUMINARC may issue a revision of this manual or a new edition of it to incorporate such changes Document Revision The Ilumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 supersedes all previous versions of this manual Please discard any older versions of this manual you may have whether in printed or electronic format and replace them with this version Author Date Editor Date llumipanel 180 IP Optic 15 30 User Manual Rev 4 E 11 A Fam IL
7. not Th D configured the e Ilumipanel 180 IP Optic 15 30 RGB can operate with a standard DMX controller the DMX starting ILUMICON controller or the ILUMICODE ADDRESSER The sections below provide address and information on how to connect these products to the corresponding controllers The instructions DMX mode for each product they will all use their default values This means that all products will operate in unison DMX Controller to operate these products with each of the above controllers are in Operation The Ilumipanel 180 IP Optic 15 30 RGB can work with a standard DMX controller The channel assignments will depend on the chosen personality see the corresponding Menu Map section and the DMX address assigned to each product see the Programming section The figure below illustrates how to connect the DMX controller to the Ilumipanel 180 IP Optic 15 30 RGB paa other SS Gu fixtures DMX512 A Controller MEA llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 9 ILUMICON The Ilumipanel 180 IP Optic 15 30 RGB can also work with the ILUMICON controller Refer to Operation instead of a standard DMX controller See the ILUMICON User Manual to learn how to D ees EN i use this controller with the Ilumipanel 180 IP Optic 15 30 RGB product llumipanel 180 IP The figure below illustrates how to connect the ILUMICON controller to the Ilumipanel Optic 15 30 RGB to 180 IP Optic 15 30 RGB operate with the ILUMICON contro
8. receive the RMA please include the following information on a piece of paper inside the box Your name Your address Your phone number The RMA A brief description of the problem Be sure to pack the product properly Any shipping damage resulting from inadequate packaging will be the customer s responsibility Proper FedEx packing or double boxing are the shipping methods ILUMINARC recommends USA WORLD HEADQUARTERS General Information ILUMINARC Technical Support Address 5200 NW 108th Avenue Voice 800 762 1084 Sunrise FL 33351 Email support iluminarc com Voice 954 923 3680 Fax 800 544 4898 World Wide Web www iluminarc com EUROPE General Information Chauvet Europe BVBA Technical Support Address Stokstraat 18 Email Eutech chauvetlighting eu 9770 Kruishoutem Belgium World Wide Web www chauvetlighting eu Voice 32 9 388 93 97 General Information Chauvet Europe Ltd Technical Support Address Unit 1C Email uktech iluminarc com Brookhill Road Industrial Estate Pinxton Nottingham UK World Wide Web NG16 6NT www chauvetlighting co uk Voice 44 0 1773 511115 Fax 444 0 1773 511110 MEXICO General Information Chauvet Mexico Technical Support Address Av Santa Ana 30 Email servicio iluminarc com mx Parque Industrial Lerma Lerma Mexico C P 52000 World Wide Web www chauvet com mx Voice 52 728 285 5000 Outside the U S United Kingdom Ireland Mexico or Benelux contact the dealer of record
9. sources with 80 and 84 CRI are essentially the same 3 If color appearance is more important than color fidelity do not exclude white light LEDs solely on the basis of relatively low CRI values Some LED products with CRIs as low as 25 still produce visually pleasing white light 4 Evaluate LED systems in person and if possible on site when color fidelity or color appearance are important issues Source DOE publication PNNL SA 56891 January 2008 llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 21 Technical Information Il LJIVII ILUMINARCO reserves the right to use its own discretion to repair or replace returned product s Always keep the original box and all packaging material as you will need those to ship the product back to ILUMINARC Contact Us 22 pa P a EP Be Y PO MS m d MAT 9 L Returns Procedure You must send the merchandise prepaid in the original box and with its original packing and accessories ILUMINARCS will not issue call tags Call ILUMINARC and request a Return Merchandise Authorization Number RMA before shipping the product Be prepared to provide the model number serial number and a brief description of the cause for the return The user must clearly label the package with an RMA ILUMINARC will refuse any product returned without an RMA DO NOT write the RMA directly on the box Instead write it on a properly affixed label Once you
10. 000 255 0 100 Nin TG ko llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 3 1 n nm N im em DA ILUMINARG Technical Information 5 Technical Information Product Maintenance To maintain optimum performance and minimize wear clean the products frequently Usage and environment are contributing factors in determining the cleaning frequency As a general guideline products should be cleaned at least twice a month Dust build up reduces light output performance and can cause overheating This can lead to reduced light source life and increased mechanical wear The cleaning frequency depends on the environment in which the product operates Damp ee Se smoky or particularly dirty surrounding can cause greater accumulation of dirt on the product s and es optics requiring more frequent cleaning surfaces carefully To clean a product after cleaning them Unplug the product from power Wait until the product has cooled Use a vacuum or dry compressed air and a soft brush to remove dust collected on the If you still external vents and reachable internal components experience technical Clean all external glass surfaces with a mild solution of glass cleaner or isopropyl problems after trying the solutions in the f f f Troubleshooting Guide Apply the solution directly to the cloth or tissue and wipe any dirt and grime to the contact ILUMINARC outside edge of the lens Technical Support alcoho
11. 18 io o PE m A 19 EEN T M UU T m P 21 LE DILIS EP E 21 LE IMIG ee T d RI 21 Color Rendering Index CHILE 21 Returns Procedure E 22 TechticalSpeciticaloNS siii EOS mE 23 i llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 3C Introduction 1 Introduction This icon indicates critical installation configuration or operation information Failure to comply with this information may render the product partially or completely inoperative damage third party equipment or cause harm to the user indicates D important installation or configuration information Failure to comply with this information may prevent the product from functioning correctly This icon This icon indicates useful non critical information The term DMX used throughout this document refers to the USITT DMX512 A transmission protocol What Is In The Box One Ilumipanel 180 IP Optic 15 30 RGB One Power Input Cable Bare Ended One Data Input Output Cable Bare Ended Warranty Card Quick Reference Guide Unpacking Instructions Immediately upon receiving a product from ILUMINARC carefully unpack the carton Check the contents of the box to ensure that all parts are present and that they are in good condition Claims The carrier is responsible for any damage incurred during shipping Therefore if the received merchandise appears to have been damaged during shipping the customer must submit the damage report a
12. ECIAL 1 Refer to the Introduction for a brief description of these modes Refer to Operation to p AUR ends learn how to configure the Ilumipanel 180 IP Optic 15 30 RGB to work in these modes sni limiting the total The DMX Values section provides detailed information regarding the DMX modes length of the DMX cable from the first product controller to the last DMX Mode DMX Address DMX Mode DMX Address product to 985 1 500 ft ARC FULL SOLID 512 300 455 m ARC1 SPECIAL1 507 ARC1 D Disconnect the product from the I AC power before Signal Wiring opening it didi To provide signal for the Ilumipanel 180 IP Optic 15 30 RGB you can connect the bare ended IP67 rated signal cable from the product to two IP67 rated signal connectors The signal cable DMX In DMX Out or use an IP67 rated junction box In this case make sure to use must match or D IP67 rated conduit exceed the lectrical ch teristi a herr Protocol Connectivity ee The Ilumipanel 180 IP Optic 15 30 RGB uses the USITT DMX 512 Protocol The also use CAT5 5e or procedure below illustrates the recommended connection method CAT6 LAN cable 1 Common Shield 2 Data In Black 3 Data In White 4 Data Out Green 5 Data Out Red Junction Junction box Conduit box 8 llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 LUMINARC Installation Controllers If you have
13. UMINARC Table of Contents Table of Contents J et de e UC IIA di 1 WAS ANO BOX e de da 1 Unpacking Instructions nnne n nnn nnns nnns 1 A au us u usus Sua kuman a ea 1 EK RE e 1 SCUSA 2 Personal Eegiel E EEN 2 MOUNTING ARA A AM cel ace a ese cat aa el eet au 2 Power and VV IMING EE 2 A A oboe Lam Cp ee 2 2 ProducE DesScCriplioii uuu uu u sux ec Mama ad acx E Ra cuu e valere d Usa dcm d rUdecE 3 mci CTS 3 Gojio ge Hc ERU 3 Produc OW CVC Wisin D E 4 Product DIMISI N S A iS 5 AOS AMA EE 6 leift ln O oratoria oo ide 6 A O Sai asa aus 6 Riiie MIS RERO 6 AS ROW T ETE 7 Power COnSUMPUION es c P 7 AG GENEE 7 F oWer PP O A 7 DIMELO ota 8 A EEN 8 Sigal ne eM ILC 8 Protocol Connectivity 2 5 xc e cp 8 elei 9 DMX Ono errar io 9 A A ER 10 ILUMICODE ADD RESSER cia ada 11 llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 i In AINT A rere Table of Contents ILUMINARC A tum susah sa fide asua aue Rd ssdeE ocu eut anasu 12 LEUMICODEADDRESSE Risas 12 lumicode Panel Descansar tic 12 CONTO OPINS a 12 A O 12 DMX Personal UT dad 12 BK CATING CSS S eri Does 12 Stato COS ita aaa 13 A Tm een 13 Pelr EE EUER ES 13 An A eee 13 Rese IO eeler En e E 13 VIG CIN ta stos 14 Bi SR Uc PET 15 LU AL accade uana EE 15 ARC A A aie a eat ballin oa EON 1 asas oa 15 AFG TV DEE 15 A 16 A 16 5 TeCHNICALINMO Mala 17 Product MalnteralieG nai 17 PIOGBCGLPHODGOIES EE 17 Troubleshooting DL EE
14. empt any repairs unless you are certified to do so Please refer to all applicable local codes and regulations for the proper installation of this product Keep this manual for future consultation If you sell this product to another user make sure that they also receive this manual LA In the unlikely D event that your llumipanel 180 IP Optic 15 30 RGB may require service please contact ILUMINARC Technical Support Avoid direct eye exposure to the light source while the product is on Always disconnect this product from its power source before servicing Always connect this product to a grounded circuit to avoid the risk of electrocution Do not touch this product s housing when operating because it may be very hot Mounting and Installation This product is for outdoor use and can be submerged IP67 However do not submerge deeper than 1 m for more than thirty 30 minutes CAUTION When transferring product from extreme temperature environments e g cold truck to warm humid ballroom condensation may form on the internal electronics of the product To avoid causing a failure allow product to fully acclimate to the surrounding environment before connecting it to power This product weighs 89 lbs 40 3 kg Always ask for help when mounting this product to avoid personal injuries or damage to the product Make sure there are no flammable materials close to this product while it is operating Wh
15. en hanging this product always secure it to a fastening device using a safety cable Power and Wiring Always make sure that you are connecting this product to the proper voltage as per the specifications in this manual or on the product s sticker Never connect this product to a dimmer pack Make sure that the power input cable is not cracked crimped or damaged Never disconnect this product by pulling or tugging on the power input cable Operation The maximum ambient temperature is 104 F 40 C Do not operate this product at a higher temperature In case of a serious operating problem stop using this product immediately llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 2 Product Description Product Description The Ilumipanel 180 IP Optic 15 30 RGB is a high intensity wash product that may be used to light a variety of both indoor and outdoor applications The Ilumipanel 180 IP Optic 15 30 RGB consists of steel base and two adjustable panels The base contains the power supply and the control unit The panels are attached to the steel arms that come from the base and are individually adjustable The DMX and power input and output are located on the power supply Features 1 3 4 6 or 7 channel RGB LED array light Operating modes channel 3 channel 4 channel 6 channel 7 channel Dimmer RGB control RGB dimmer RGB control per pod RGB dimmer color macro strobe dimmer speed Five d
16. ing Point d Test 22011 ALL 44 657 Test Lab ILUMINARCO R amp D Optics Laboratory 67 000 Photometry Type B CIE Class Direct Cutoff Class Full Cutoff 83 333 111 667 134 000 B 0H B 20H wA 0 10 20 307 oU li 459 H Flood Summary Efficiency Lumens s Vertical Spread Field 10 30 5 4 274 3 19 8 19 9 Beam 50 10 9 1 527 3 9 8 10 2 Total 42 7 5 984 9 Illuminance at a Distance Center Beam FC Beam Width 14 610 49 fc 0g 5ft O 5ft 3 702 62 fc 1 1ft 1 0ft 1 645 61 fc 1 6ft 1 5ft 925 66 fc 2 1ft 2 1ft 592 42 Fc 2 FRE 2 6ft 3 0ft 12 0Rt LS DP 411 40 fc Sit 3 1ft Wuert Spread 10 2 MhHoriz Spread 9 8 13 0 Photometics Pro 1 3 2 copyright 2003 2008 by Solutions Inc Reported data calculated from manufacturer s data file based on IES recommended methods 20 llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 m IL LJIVIIINZATFSL Technical Information mi mme P RK LED Disclaimer LED Life ILUMINARC rates LED lifetime based on lumen depreciation of 70 of the original output with data provided by the manufacturer of the LED Data from the manufacturer of the LED are not independently verified or measured by ILUMINARC When the product is operating in optimal environmental conditions the LED lifetime is rated to be 50 000 to 70 000 hours by the LED manufacturer LED Binning LED manufacturers sort LEDs into bins
17. istinct dimming curves Dual Vector Array LED panel positioning High power 5 W 700 1 000 mA RGB LEDs IP67 with 316 stainless steel hardware GORE valve Cast and extruded aluminum with Integrated Cooling Enhancement M Options ILUMICODE ADDRESSER for product configuration features is now available d The RDM2go which includes a built in ilumicode addresser along with many other useful The Ilumicoode addresser is required for product configuration sold separately llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 Product Description ILUMINAR Product Overview Locking Adjustment Plate 316 Stainless Steel Gland Nuts DOO O OooOoO06oO6O O O O O O O 9 O 00000000 o o o o og y NE Position Locking Pin w ssrrr sr rr rrrrrrrr Cnr S w A _ _ _ T SE md L A srsm r shr rs HU I I I lt IKI H amp E E Z VIII I I II I I IIIIIIII IIIII IIIIIII ICE YIXIIzIIII IIINUIISSWgTTSRWI IIIIIIGI IIIIIIIIIIIIOIG IGI O gt II lt SII ICL I I I I GI WIIII amp QI F D Lee A o 7 cdi dii Eu w C AY A A W WE RE AY A q Lb 4 N LH A WA A RE Y AY AY A evo SO IJ I D Mounting Points 4 llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 LUMINARC Prod
18. l and a soft lint free cotton cloth or lens cleaning tissue Gently polish the external glass surfaces until they are free of haze and lint Product Repairs ILUMINARCS strongly advises you against attempting any repairs to this product unless you are an authorized ILUMINARC technician ILUMINARC presents the information contained in the Troubleshooting Guide as potential solutions only In most cases opening the product s housing will invalidate its warranty unless there is a written indication to the contrary llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 17 Technical Information ILUN Troubleshooting Guide Symptom Low light intensity Group of LEDs not illuminating One LED does not illuminate No LEDs illuminate Circuit breaker fuse keeps tripping blowing Product does not power up Product does not respond to DMX DMX signal problems Cause s Action s Dirty lens assembly Clean the product regularly Misaligned lens assembly Return for service to Iluminarc Faulty LED Return for service to Iluminarc Faulty LED driver Return for service to Iluminarc 9 Faulty LED Return for service to Iluminarc Faulty LED driver Return for service to Iluminarc Faulty LED board Return for service to Iluminarc 9 Faulty LED driver board Return for service to Iluminarc 9 Excessive circuit load Check total load placed on the electrical circuit Check for a short in the electrical wiring Check for power on powe
19. ller Y S J NU WE SS NC h ES SM gt LIS To other fixtures ILUMICON Controller 10 llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 LUMINARC Installation ILUMICODE ADDRESSER The RDM2go The Ilumipanel 180 IP Optic 15 30 RGB uses the ILUMICODE ADDRESSER Week dree Ilumicode for configuration purposes The diagram below shows how to connect the uilt in ilumicode Ilumicode to this product This connection will control multiple products at the same time addresser along with many other useful features is all having the same DMX address now available Important The Ilumicode must be used to configure this product The Ilumicode can be purchased separately through your ILUMINARCO sales representative To assign individual DMX addresses to each product you must connect the llumicode to each product individually ILUMINARCO suggests that you connect no more than 20 products in this mode and keep the total distance to less than 60 m 197 ft Otherwise you might need to use an optically isolated signal amplifier e o 6 9 9 09 N o e e To other fixtures 0 S 1 Gnd 1 Gnd Black clip 2 Data 2 Data Green clip 3 Data 3 Data Red clip DMX Output Signal Connector llumicode Addresser llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 11 Operation 4 Operation When you scroll through the menu options you will see many of them
20. nd any related claims to the carrier not ILUMINARC The customer must submit the report upon receipt of the damaged merchandise Failure to do so in a timely manner may invalidate the customer s claim with the carrier For other issues such as missing components or parts damage not related to shipping or concealed damage the customer must make claims to ILUMINARC within seven 7 days of receiving the merchandise Text Conventions Convention Meaning 1 512 A range of values in the text 50 60 A set of mutually exclusive values in the text ILUMICON UM The name of another publication or manual lt SET gt A button on the product s control panel Settings A product function or a menu option MENU gt Settings A sequence of menu options 1 10 A range of menu values from which to choose in a menu Yes No A set of two mutually exclusive menu options in a menu ON A unique value to enter or select in a menu llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 1 d F DN B a Y FRE Jh v P UN ell Ty dh SA E d A j E p 7 Safety Notes EE ge Please read all the following Safety Notes carefully because they include important information AN user serviceable on how to Install use and maintain this product safely parts inside this product Any reference to Personal Safety servicing you may find in this User Manual will only apply to properly certified ILUMINARCO technicians Do not open the housing or att
21. put Wattage 284 Den ee Luminous Opening Point 6 000 ane Test 2011 ALL 12 000 30 Test Lab ILUMINARCO R amp D Optics Laboratory oa Photometry Type B ED CIE Class Direct Ge Cutoff Class n a 30 000 509 35 000 wA 40 20 309 40 B U H li 30 H D Flood Summary Efficiency Lumens Horizontal Spread Vertical Spread Field 10 2 8 5 019 2 39 5 39 3 Beam 50 1 5 2 659 8 21 3 21 2 Total 3 2 5 806 3 luminance at a Distance Center Beam FE 3 939 29 c 984 82 Fc 3 0 E 0 437 70 fc 3 0ft 246 21 Fc 157 57 fc 12 0Rt IS Op 18 0 109 42 fc Wuert Spread 21 2 Beam Width 1 1ft 1 1ft 2 2ft 2 3ft 3 4ft 3 4ft dt 4 5f 5 bft 5 bft b 7ft 6 8ft MhHoriz Spread 21 3 Photometics Pro 1 3 2 copyright 2003 2008 by Solutions Inc Reported data calculated from manufacturer s data file based on IES recommended methods llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 19 Technical Information LUMINARC Filename llumipanel 180 IP Optic RGB Polar Candela Distribution 15 degree single panel at full 134 000 1809 170 1609 1509 140 Manufacturer ILUMINARCO Mater Luminaire llumipanel 180 IP Optic RGB single head 15 degrees dee Luminaire Cat 016204387 67 000 Lamp 60 Red 60 Green 60 Blue 44 557 Lamp Output 1 lamp s rated Lumens lamp 7960 22 333 Max Candela 133 294 4 at Horizontal 0 Vertical 0 Ben Input Wattage 295 4 Luminous Open
22. r M ON E a Repeat steps 2 through 5 for the other white colors Reset to Factory Settings 1 Goto SETTINGS gt RESET 2 Select an option YES NO llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 13 n In Pm P N FI 17 jl Operation ILOIMINARCT Menu Map Main Level Programming Levels Description DMX 001 512 Sets the DMX starting address ARC 1 3 channel RGB control ARC1 D 4 channel RGB control dimmer ARC FULL 7 channel RGB control dimmer color macro strobe PERSON N A dimmer speed REMOTE Allows use of the ILUMICON SOLID 1 channel dimmer SPECIAL 1 6 channel RGB per module WHITE 1 11 RED Determines the white balance for the color macros CALIB GREN 0 255 5 E OE RGBTOW BLUE etermines t e white balance when IS active Dimmer works in linear mode DIM 1 DIMMER DIM 2 N A I Dimmer works in non linear mode from fast to slow DIM 3 DIM 4 GREN STATIC GREN 0 255 Configures the static color and effects BLUE STRB OFF Maximum output unbalanced white COLOR RGBTOW White output is as per CALIB gt RGBTOW settings SETTINGS Output matches that of product s previous versions RESET NO YES Resets unit to factory default settings 14 llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 DMX Values ARC FULL Channel Function 1 NM AE c 3 B e Color Macros N e i 2 c e Dimmer Speed ARC 1 Channel 1 2 3 ARC 1 D Channel Function Func
23. r outlet Check power cord Return for service to ILUMINARC 9 Check Control Panel and product addressing Damaged DMX cables Check DMX cables Wrong polarity on the controller Check polarity switch settings on the controller Loose DMX cables Check cable connections Faulty DMX interface Return for service to luminarc Faulty Display Main board Return for service to Iluminarc 9 Non DMX cables Use only DMX compatible cables Bouncing signals Install terminator as suggested in the DMX Primer from the ILUMINARCO website at http www iluminarc com reports dmx rimer Long cable low level signal Install an optically coupled DMX splitter right after the product with the strong signal Too many products Install an optically coupled DMX splitter after product 32 or before Interference from AC wires Keep DMX cables separated from power cables or fluorescent black lights llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 LUMINARC Photometrics Filename llumipanel 180 IP Optic RGB 30 degree single panel at full Technical Information Polar Candela Distribution 1800 1709 1509 150 140 36 000 Manufacturer ILUMINARCO Lenin iene Luminaire llumipanel 180 IP Optic RGB single head 30 degrees 24000 i Luminaire Cat 01620437 18 000 Lamp 60 Hed 60 Green 60 Blue 32 000 110 Lamp Output 1 lamp s rated Lumens lamp 2000 E ndi tigo Max Candela 35 453 7 at Horizontal 0 Vertical 0 In
24. sses of all products in the current DMX universe to avoid address overlapping DMX Starting Address 1 Goto DMX 2 Select a starting DMX address 001 512 llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 Im nin i f r3 a o ILUMUINARC Operation Static Colors 1 Goto STATIC 2 Selecta color or effect Red Green Blue or Strobe 3 Select a color value 000 255 or a strobe frequency 0 20 Dimmer This setting gives the user four different options to simulate the dimming curve of an incandescent lighting product DIM1 is the 1 Goto DIMMER Sn 2 Select a dimming curve OFF or DIM1 4 is the slowest Procedure DIMMER Description OFF Dimmer curve is linear with fader DIM1 Non linear fastest DIM2 Non linear fast DIM3 Non linear slow DIM4 Non linear slowest Color 1 Goto SETTINGS gt COLOR 2 Select the color method OFF RGB TO W or UC Details OFF When the RGB faders are all set to 255 the output is maximum RGB TO W When the RGB faders are all set to 255 the output is the selected White color see Whites Setting UC When the RGB faders are all set to 255 the output matches the same color output of previous versions of this product Whites Setting 1 Goto CALIB Select a white color WHITE 1 11 or RGB TO W Select an RGB color Red Green or Blue Configure the color value 0 255 Repeat steps 3 and 4 for the other RGB colors to obtain a white colo
25. that do not correspond with the menu map Skip them as they do not work with the RGB only output products ILUMICODE ADDRESSER The Ilumipanel 180 IP Optic 15 30 RGB needs an external controller the Ilumicode to change its configuration llumicode Panel Description Button Function MENU Exits from the current menu or function Enables the currently displayed menu or sets the ENTE I ACERS currently selected value into the selected function Navigates upwards through the menu list and increases lt UP gt i the numeric value when in a function Navigates downwards through the menu list and lt DOWN gt d decreases the numeric value when in a function Turns the unit on The unit will turn off automaticall UP POWER dic y Q Q after 30 seconds of inactivity MENU Y ENTER DOWN Control Options You can set the Ilumipanel 180 IP Optic 15 30 RGB start address in the 001 512 DMX range This allows for the control of up to 73 products in the 7 channel ARC FULL personality Programming Carry out all the programming procedures indicated below from the control panel Refer to the Menu Map section to learn how the menu options relate to each other Use ENTER and MENU to change levels in the Menu Map moving right and left respectively Use UP and DOWN to move vertically within the Menu Map DMX Personality 1 Goto PERSON and select any DMX personality 2 Make sure to rearrange the DMX addre
26. tion JHE ele SIE 5 O P Ww de ke llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 88 Operation Value Percent Setting 000 255 0 100 000 255 0 100 000 255 0 100 000 255 0 100 000 U 010 No Function 011 030 IR 100 031 050 R 100 0 051 070 R 0 071 090 R 0 091 110 R 0 100 111 130 R 100 131 150 R 100 151 170 R 100 0 171 200 R 100 201 205 White 1 206 U 210 White 2 211 215 White 3 216 220 White 4 221 225 White 5 226 U 230 White 6 231 235 White 7 236 U 240 White 8 241 245 White 9 246 U 250 White 10 251 255 White 11 000 009 No function 010U 255 Slow Fast 000 U 009 Uses Ilumicode Settings 010 U 029 Off 030 U 069 Speed 1 Fastest 070 U 129 Speed 2 130 189 Speed 3 190 U 255 Speed 4 Slowest 0 100 100 100 100 0 0 0 0 100 100 0 100 B 0 B 0 B 0 100 B 100 B 100 B 100 0 B 0 100 B 100 B 100 Q Q Q Q Q Q Q Q Q Value Percent Setting 000 U 255 0 100 000 255 0 100 000 255 0 100 Value Percent Setting 000 255 0 100 000 255 0 100 000 255 0 100 000 255 0 100 15 Operation ILUMUNARC SOLID Channel Function Value Percent Setting 1 Dimmer 000 255 0 10096 SPECIAL 1 Channel Function Value Percent Setting Module 2 Blue
27. tion Wire U S Screw Color U S Wire Europe IP67 Pin AC Live i AC Neutral AC Ground Green Yellow Green Green Y ellow 3 Power Wiring You can connect the bare ended IP67 rated AC power cable from the product to an IP67 rated power connector or IP67 rated junction box If using junction boxes make sure to use IP67 rated conduit for surface installations TT From fuse panel Distribution Conduit Distribution Box Box Installation ILUMINARC D The llumipanel DMX Linking r NE You may link the Ilumipanel 180 IP Optic 15 30 RGB to a DMX controller using a standard be linked using DMX DMX serial connection If using other DMX products compatible with the Ilumipanel 180 IP cable in a daisy chain Optic 15 30 RGB you can control each individually with a single DMX controller ial fashion T E Ee Wihihe E BE If you are not familiar with the DMX standard or if you need information about the DMX cables standard no more than needed to link the Ilumipanel 180 IP Optic 15 30 RGB to a DMX controller download the 32 products should be DMX Primer from the ILUMINARCO website at http www iluminarc com reports dmx connected on one daisy chain without using a punt DMX optically isolated splitter Doing otherwise DMX Modes dla olle lao The Ilumipanel 180 IP Optic 15 30 RGB uses the standard DMX data connection for its ido LA ARCI ARC1 D ARC FULL REMOTE SOLID and SP
28. uct Dimensions Product Description 533 mm Sech Front View mm Side View 22 in Bottom View llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 nsta lati on LJ NY NI A R O i 3 Installation A Make sure to Mounting mount this product away from any Before mounting this product read and follow the safety recommendations indicated in the flammable material as Safety Notes indicated in the Safety Notes Orientation Always mount this product in a safe position making sure there is adequate room for ventilation configuration and maintenance Installation The Ilumipanel 180 IP Optic 15 30 RGB has twelve 12 mounting points on the base of the product to secure it to almost any surface provided that it can support the product s weight ILUMINARC recommends following the general guidelines below when mounting the Ilumipanel 180 IP Optic 15 30 RGB When selecting an installation location consider ease of access to the product for operation programming adjustments and routine maintenance Make sure the product s mounting location can support its weight Please see the Technical Specifications for the weight bearing requirements of this product llumipanel 180 IP Optic 15 30 RGB User Manual Rev 4 ILUMINARC Always connect N the llumipanel 180 IP Optic 15 30 RGB to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or
Download Pdf Manuals
Related Search