Selenio DA-S/SR and DA-H/HR 6802+ DL Series Edition A 20140311
Contents
1. TitleOne Velocity ESX Velocity PRX Velocity XNG Versio Videotek SD STAR X50 and X85 are trademarks of Imagine Communica tions or its subsidiaries Altitude Express Connectus Enabling PersonalizedTV ICE9 Broadcast System ICE Illustrate ICE Q algorithms ICE PAC Imagine ICE Inscriber Inscriber Connectus Invenio NEO Nexio Nexio AMP PersonalizedTV Router Works Videotek Videotek ASI STAR Videotek GEN STAR and Videotek HD STAR are registered trademarks of Imagine Communications or its subsidiaries Microsoft and Windows are registered trademarks of Microsoft Corporation HD BNC is a trademark of Amphenol Corporation Some products are manufactured under license from Dolby Laboratories Dolby and the double D symbol are registered trademarks of Dolby Laboratories DTS Neural audio products are manufactured under license from DTS Licensing Limited DTS and the Symbol are registered trademarks amp the DTS Logos are trademarks of DTS Inc 2008 2010 DTS Inc All other trademarks and trade names are the property of their respective companies Contact Information Imagine Communications has office locations around the world For locations and contact information see http www imaginecommunications com contact us Support Contact Information For support contact information see Support Contacts http www imaginecommunications com services techn2. oj sj a ef Ls dii PI HARRIS Figure 2 2 Module Status Indicator LED A module status LED reports the state of the module See Figure 2 2 for the location of this LED and Table 2 4 for a definition of the LED colors Table 2 4 Module Status Indicator LED Descriptions LED Color Sequence Meaning Off There is no power to the module the module is not operational Green There is power to the module the module is operating properly Amber There is an alarm condition DA S SR H HR6802 DL Installation and Operation Manual 11 Copyright 2009 Harris Corporation Chapter 2 Installation and Operation Module Specific LEDs m s s te D PBEPRPPPEP iiiii FIAT Figure 2 3 Module Specific LEDs Each 6800 module has a number of LEDs assigned to indicate varying states functions See Figure 2 3 for the location of these LEDs and Table 2 5 for their functions Table 2 5 Module Specific Status LEDs Name Color Function PRES Green Input signal present Off Input signal absent LOCK Green Signal locked Off Signal cannot be locked 270 Green Input signal is relocked at 270 Mb s Off Input signal is not relocked at 270 Mb s 1 5G Green Input signal is relocked at 1 485 Gb s Off Input signal is not relocked at 1 485 Gb s 3 0G Green Input signal is relocked at 2 97 Gb s Off Input signal is not relocked at 2 97 Gb s
3. ADC CCS Navigator Channel ONE ChannelView ClipSync Delay D Series D Series DSX Deliver the Moment Delivering the Moment FAME Farad G8 G Scribe HView IconMaster IconLogo IconSta tion IconKey InfoCaster InfoCaster Creator InfoCaster Manager InfoCaster Player InstantOnline Invenio Live Update mCAPTURE Magellan Magellan CCS Navigator Magellan Q SEE MultiService SDN NetPlus NetVX NewsForce Nexio G8 Nexio AMP ChannelView Nexio Channel ONE Nexio ClipSync Nexio Delay Nexio Digital Turnaround Processor Nexio Farad Nexio G Scribe Nexio IconKey Nexio IconLogo Nexio IconMaster Nexio IconStation Nexio InfoCaster Nexio InfoCaster Creator Nexio InfoCaster Manag er Nexio InfoCaster Player Nexio InfoCaster Traffic Nexio InstantOnline Nexio mCAPTURE Nexio News Force Nexio NXIQ Nexio Playlist Nexio Remote Nexio9RTX Net Nexio TitleMotion Nexio TitleOne Nexio Velocity ESX Nexio Velocity PRX Nexio Velocity XNG Nexio Volt OPTO Panacea Platinum Playlist Predator II GRF Predator Il GX Punctuate Remote RTX Net QuiC Q SEE SD STAR Selenio Selenio 6800 SelenioNext Selenio X50 Selenio X85 Selenio X100 TitleMotion
4. Instructions and Standards Manual to find the safety standards and compliances for this 6800 series product A safety manual is shipped with every host frame installation and operation manual and can be downloaded from our website Alternatively contact your Customer Service representative for a copy of this safety manual Safety Terms and Symbols This product manual uses the following safety terms and symbols to identify certain conditions or practices See the 6800 Safety Instructions and Standards viii Manual for Table P 3 more information Safety Terms and Symbols Symbol A Description WARNING Identifies conditions or practices that can result in personal injury or loss of life high voltage is present Uninsulated dangerous voltage within the product s enclosure may be sufficient to constitute a risk of electric shock to persons A CAUTION Identifies conditions or practices that can result in damage to the equipment or other property Important operating and maintenance servicing instructions are included in the literature accompanying the product DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Preface Restriction on Hazardous Substances RoHS Directive Directive 2002 95 EC commonly known as the European Union EU Restriction on Hazardous Substances RoHS sets limits on the use of certain substances found in electrical and el
5. n re cie oe rii eee etek 17 Start Up Time edat eua oet tein be dee onte E deed tet En ee 17 Keywords i5 nn e oO EE Te 19 DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Preface Manual Information Purpose This manual details the features installation procedures operational procedures and specifications of the following distribution amplifiers Audience DA S6802 DL 1x8 looping input SD ASI distribution amplifiers DA SR6802 DL 1x8 looping input SD ASI distribution amplifiers with reclocking DA H6802 DL 1x8 looping input 3 Gb s HD SDI SD SDI and ASI distribution amplifiers DA HR6802 DL 1x8 looping input 3 Gb s HD SDI SD SDI and ASI distribution amplifiers with reclocking This manual is written for engineers technicians and operators responsible for the installation setup and or operation of the DA S SR H HR6802 DL distribution amplifiers Revision History Table P 1 Manual Revision History Edition Date Revision History A March 2009 Initial release DA S SR H HR6802 DL Installation and Operation Manual v Copyright 2009 Harris Corporation Preface Writing Conventions To enhance your understanding the authors of this manual have adhered to the following text conventions Table P 2 Manual Style and Writing Conventions Term or m Convention Description Bold Indicates dialog boxes pro
6. 2 DL 00 E EAI AEE NEI E A E ETA 2 DAHOSI 10 p RES 2 DA HR6802 DL 2 rettet Pet dr eae 2 Back Modules RI I HARTEN OSA a be Sacto 3 Signal Eloy os ose t DUO NO ER 4 Chapter 2 Installation and Operation Installation Procedures 23 ee ee eerte e e RETR 5 Unpacking the Module 5 a eoa ee e pe e Da e nd 5 Setting TUmbpers s e qoi re e RR ERE GENERIC FERREUS 5 Maximum 6800 Frame Power Ratings sess 6 Installing 6800 Modules sesessssssseseeseeeeeeeneenen nennen 7 Making Connections 5o TURN ENTER FO ERE E 7 Operation o eA Nate e UD EE NE DR ONIS 8 Operating Notes asta teste estet e n et aa estis 8 Understanding Parameter Types sese 8 DA S SR H HR6802 DL Installation and Operation Manual iii Copyright 2009 Harris Corporation Contents Setting Locally Controlled Parameters sse 9 Setting Remotely Controlled Parameters sse 10 Recalling Default Parameter Settings 10 Reading Software and Hardware Versions sse 11 LEDs and Alarms e rire EO RENI ed eed 11 Module Status Indicator LED 11 Module Specific LEDS uite hie cde ie viene bue 12 PNE CE EE 13 Chapter 3 Specifications Index hip ates 15 Utputs 4 iu eed riesen tete Sete e re ERAS d RE Uds 16 Performances T 17 Power Consumption sessi enne 17 T rmperature eoe D et OR E
7. 325 m Belden 1694A or equivalent 0 459 ft 0 140 m Belden 1694A or equivalent 0 230 ft 0 70 m Belden 1694A or equivalent DA H6802 DL and DA HR6802 DL only DA S SR H HR6802 DL Installation and Operation Manual Copyright O 2009 Harris Corporation 15 Chapter 3 Specifications Outputs Table 3 2 Output Specifications Item Specification Number of outputs 8 reclocked 1 looping Signal type 3 0G HD SD ASI Connector BNC per IEC169 8 Impedance 75 Return loss gt 15 dB 5 Mhz to 1 5 GHz gt 10 dB 1 5 GHz to 3 0 GHz Signal amplitude 800 mV 10 DC offset 0 0 V0 5 V Rise and fall time SD SDI ASI 400 700 ps 1 5 HD SDI lt 270 ps 3 0 HD SDI lt 135 ps Overshoot lt 10 Reclocking 2 97 Gb s 1 485 Gb s 270 Mb s DA H6802 DL and DA HR6802 DL only 16 DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Performance Chapter 3 Specifications Table 3 3 Performance Specifications Item Specification Jitter SD 1 5 HD 3 0 HD 0 2 UI 0 2 UI 0 3 UI Propagation lt 1 0 ns for reference only Power Consumption Power consumption for DA S SR H HR6802 DL modules is lt 6 W Temperature Table 3 4 Temperature Specifications Item Specification Performance 32 to 122 F 0 to 50 C Operating 41 to 113 F 5 to 45 C St
8. 802 DL modules can be installed in FR6802 or FR6822 frames They cannot be installed in 6800 7000 series frames Table 2 1 Maximum Power Ratings for 6800 Frames Max Frame Max Power 6800 Frame Type Power ee Dissipation Dissipation Per Slot FR6802 XF 120 W 20 6 W frame with AC power supply FR6802 XF48 105 W 20 5 25 W frame with DC power supply FR6802 QXF 120 W 20 6 W frame with AC or DC power supply FR6822 120W 20 6W frame with AC or DC power supply DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Chapter 2 Installation and Operation Installing 6800 Modules Back Module Types The DA S SR H HR6802 DL modules have double width back modules see Figure 1 1 on page 3 See the host frame installation and operation manual for details on back module installation Installing Modules These modules require no specialized installation or removal procedures See the host frame installation and operation manual for information about installing and operating a frame and its components or for removing components from a frame These modules cannot be installed in 6800 7000 series frames Making Connections DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Once you have installed the module you can connect it to the appropriate input and outputs Chapter 2 Installation and O
9. Installation and Operation Manual DA S6802 DL DA SR6802 DL DA H6802 DL DA HR6802 DL 1x8 Looping Input SD ASI Distribution Amplifiers 1x8 Looping Input SD ASI Distribution Amplifiers with Reclocking 1x8 Looping Input 3 Gb s HD SDI SD SDI and ASI Distribution Amplifiers 1x8 Loop ing Input 3 Gb s HD SDI SD SDI and ASI Distribution Amplifiers with Reclocking Edition A 175 100071 00 Publication Information 2014 Imagine Communications Corp Proprietary and Confidential Imagine Communications considers this document and its contents to be proprietary and confidential Except for making a reasonable number of copies for your own internal use you may not reproduce this publication or any part thereof in any form by any method for any purpose or in any language other than English without the written consent of Imagine Communications All others uses are illegal This publication is designed to assist in the use of the product as it exists on the date of publication of this manual and may not reflect the product at the current time or an unknown time in the future This publication does not in any way warrant description accuracy or guarantee the use for the product to which it refers Imagine Communications reserves the right without notice to make such changes in equipment design specifications components or documentation as progress may warrant to improve the performance of the product Trademarks 6800
10. Operational on DA SR6802 DL and DA HR6802 DL modules only Operational on DA HR6802 DL modules only 12 DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Chapter 2 Installation and Operation Alarms If an alarm is triggered within your DA S SR H HR6802 DL module the Status LED will turn amber Alarms are usually logged and monitored within the available 6800 software control applications See the appropriate software control user manual or online help for more information Table 2 6 Alarm Definitions Alarm Name Alarm Description Alarm Level Loss of input Indicates input signal is Major lost or absent Loss of lock Indicates signal is not Major locked DA S SR H HR6802 DL Installation and Operation Manual 13 Copyright 2009 Harris Corporation Chapter 2 Installation and Operation 14 DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Chapter 3 Specifications Specifications and designs are subject to change without notice Inputs Table 3 1 Input Specifications Item Specification Number of inputs 1 Signal type 3 0G HD SD ASI Connector BNC per IEC169 8 Impedance 75 Return loss gt 15 dB 5 MHz to 1 5 GHz gt 10 dB 1 5 GHz to 3 0 GHz Maximum signal level 2 0 88 V Cable equalization 270 Mb s 1 5 HD SDI 3 0 HD SDI 0 1 066 ft 0
11. Remotely Controlled Parameters Name Range Description Signal Present RO No Indicates if input is present or not Yes Slew Rate Auto Sets the output slew rate control SD HD Serial Number String Displays the module s unique identifier License Key String Activates options Locked Data Rate Unknown Displays the data rate to which the RO e 270 Mb s module is locked Bypass Mode 1 485 Gb s HD 2 97 Gb s HD Reclocking Mode Auto Displays the data rate to which the 270 Mb s module is forced to lock Bypass Mode 1 485 Gb s HD 2 97 Gb s HD Loss of Input Alarm Disable Enables disables Loss of Input alarm Enable Loss of Lock Alarm Disable Enables disables Loss of Lock alarm Enable Recalling Default Parameter Settings You cannot recall default parameter settings for DA S SR H HR6802 DL modules 10 DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Chapter 2 Installation and Operation Reading Software and Hardware Versions The current software version of your DA S SR H HR6802 DL module can only be viewed using a CCS enabled control panel or a CCS software application See your CCS software application user manual or CCS software application online help for information on viewing software and hardware version numbers LEDs and Alarms Module Status Indicator LED EZIIIII RTPI of Lens di oj
12. art Up Time Module start up time is approximately 3 seconds DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation 17 Chapter 3 Specifications 18 DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation A Adjustable parameters 8 Alarms configuring parameters 10 definitions 13 B Back connectors See Back modules Back modules 3 7 C Connections 7 D E Descriptions back modules 3 LEDs 11 12 product description 1 Directives Restriction on Hazardous Substances ix Waste from Electrical and Electronic Equipment x F G Frames compatible 6 7 H Hardware versions reading 11 Input alarm 10 13 Input specifications 15 Installation back modules 7 jumpers 5 making connections 7 power ratings 6 required frames 7 DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Index Introduction module descriptions back modules 3 product description 1 signal flow diagrams 4 J K Jumpers J15 setting jumpers 5 L LEDs descriptions 11 12 module specific 12 module status 11 Lock alarm 10 13 Loss of Input Alarm parameter 10 Loss of Lock Alarm parameter 10 M N Manual information v vi Modules back modules 3 7 descriptions 1 features 1 2 jumpers 5 LEDs module specific 12 module status 11 O Operation alarms configuring parameters 10 definitions 13 LEDs 11 12 operating
13. cking list is missing Contact the carrier if any item is damaged Gt Re oS Remove all packaging material from the product and its associated components before you install the unit Product Servicing DA S SR H HR6802 DL modules are not designed for field servicing All hardware and firmware upgrades modifications or repairs require you to return the modules to the Customer Service center Returning a Product In the unlikely event that your product fails to operate properly please contact Customer Service to obtain a Return Authorization RA number and then send the unit back for servicing Keep at least one set of original packaging in the event that you need to return a product for servicing If the original packaging is not available you can purchase replacement packaging at a modest cost or supply your own packaging as long as it meets the following criteria e Withstands the weight of the product Holds the product rigid within the packaging Leaves at least two inches of space between the product and the container e Protects the corners of the product Ship products back to us for servicing prepaid and if possible in the original packaging material If the product is still within the warranty period we will return the product prepaid after servicing DA S SR H HR6802 DL Installation and Operation Manual vii Copyright 2009 Harris Corporation Preface Safety Standards and Compliances See the 6800 Safety
14. e pin that allows the reclocker to handle 1 485 Gb s data only If 1 5HD reclock mode is selected the 1 5 Gb s LED will turn on If the module can successfully lock to the input the lock LED will turn on If reclocking is not successful the lock LED will turn off and un reclocked data will be present at output 3 0HD Forces reclocker to lock to a 2 97 Gb s signal Set the jumper on the pin that allows the reclocker to handle 2 97 Gb s data only If 3 0HD reclock mode is selected the 3 0 Gb s LED will turn on If the module can successfully lock to the input the lock LED will turn on If reclocking is not successful the lock LED will turn off and un reclocked data will be present at output BYPASS Bypasses the reclocker REMOTE Selects remote control operation Operational on DA HR6802 DL modules only Chapter 2 Installation and Operation Setting Remotely Controlled Parameters Table 2 3 describes parameters that are accessible remotely Select remote control mode by setting the J1 jumper to Remote See your CCS control software application manual or online help for more information on setting and monitoring these parameters remotely Legend Bold option Indicates that this is the default setting for the parameter RO Indicates that parameters are read only feedback and cannot be used to select controls All parameters clip unless otherwise noted Table 2 3 DA S SR H HR6802 DL
15. ectronic equipment The intent of this legislation is to reduce the amount of hazardous chemicals that may leach out of landfill sites or otherwise contaminate the environment during end of life recycling The Directive which took effect on July 1 2006 refers to the following hazardous substances e Lead Pb Mercury Hg e Cadmium Cd Hexavalent Chromium Cr V1 e Polybrominated Biphenyls PBB Polybrominated Diphenyl Ethers PBDE In accordance with this EU Directive products sold in the European Union will be fully RoHS compliant and lead free See our website for more information Spare parts supplied for the repair and upgrade of equipment sold before July 1 2006 are exempt from the legislation Equipment that complies with the EU directive will be marked with a RoHS compliant symbol as shown in Figure P 1 RoHS Compliant Figure P 1 RoHS Compliance Symbol DA S SR H HR6802 DL Installation and Operation Manual ix Copyright 2009 Harris Corporation Preface Waste from Electrical and Electronic Equipment WEEE Directive The European Union EU Directive 2002 96 EC on Waste from Electrical and Electronic Equipment WEEE deals with the collection treatment recovery and recycling of electrical and electronic waste products The objective of the WEEE Directive is to assign the responsibility for the disposal of associated hazardous waste to either the producers or users of these products A
16. g this product read the 6800 Series Safety Instructions and Standards manual shipped with every host frame installation and operation manual or downloadable from our website This safety manual contains important information about the safe installation and operation of 6800 series products Unpacking the Module Review Unpacking Shipping Information on page vii before you install DA S SR H HR6802 DL modules Setting Jumpers You need to configure modules for local or remote operation before power up You can use the J1 jumper to select local control reclock setting or to select remote control operation See Figure 2 1 for a close up view of the J1 jumper set Table 2 2 on page 9 shows the possible local reclocking mode parameters Follow this procedure to set the jumpers 1 Locate the J1 jumper set on the module 2 Placea shunt on the pin that corresponds to the mode that you want DA S SR H HR6802 DL Installation and Operation Manual 5 Copyright O 2009 Harris Corporation Chapter 2 Installation and Operation e Li ss LI el Lens oi ud P HARRIS Figure 2 1 J1 Jumper Set Location Maximum 6800 Frame Power Ratings Power consumption information is listed in Chapter 3 Specifications on page 17 EETITITI Table 2 1 describes the maximum allowable power ratings for 6800 frames Note the given maximums before installing any 6800 modules in your frame DA S SR H HR6
17. ical support eCustomer Portal http support imaginecommunications com 2014 Imagine Communications Corp Proprietary and Confidential 6800 DA S6802 DL 1x8 Looping Input SD ASI Distribution Amplifiers DA SR6802 DL 1 x8 Looping Input SD ASI Distribution Amplifiers with Reclocking DA H6802 DL 1x8 Looping Input 3 Gb s HD SDI SD SDI and ASI Distribution Amplifiers DA HR6802 DL 1x8 Looping Input 3 Gb s HD SDI SD SDI and ASI Distribution Amplifiers with Reclocking Installation and Operation Manual Edition A March 2009 Contents Preface Manual Irntormation eo ero e ree v PULPOSC riri oeri eiet aE EE EE ERE teach EE v Penta AO EEEE E da deu a v Revision History canere ER EAER E ERE v Witing Conventions efs r E e eS eE vi Obtaining Documents eee tee e E E ies vi Unpacking Shipping Information essere vii Unpacking a Product eene eee med vil Product Servicii misen cerni tee a be vii Retiiming a Ptoduet i E E A vii Safety Standards and Compliances sse vili Safety Terms and Symbols sse viii Restriction on Hazardous Substances RoHS Directive sssuuss ix Waste from Electrical and Electronic Equipment WEEE DitectiVe ee ERE DEREN I STER EA X Chapter 1 Introduction Product Description due eo WU HAM RM n 1 Main Features ceee ene E EE EEE EEEE EAEE EE i eed iei eim 1 DA S68023DE 5 cd e at t ea n HORRORE ERE ERE ove 1 DA SR680
18. notes 8 parameters 19 Index lists 9 10 recalling settings 10 setting parameters 9 10 types 8 reading hardware versions 11 software versions 11 Output specifications 16 P Q Parameters adjustable 8 Loss of Input Alarm 10 Loss of Lock Alarm 10 read only 8 recalling settings 10 remotely controlled 10 setting parameters 9 10 types 8 Performance specifications 17 Power consumption specifications 17 Power ratings 6 Power up time 17 Product description 1 R Reading hardware versions 11 software versions 11 Read only parameters 8 Reclock modes 9 Remotely controlled parameter list 10 Restriction on Hazardous Substances RoHS directive ix S Safety compliances viii 20 RoHS directive ix standards viii symbols viii terms viii WEEE directive x Setting jumpers 5 Shipping information vii Signal flow diagrams 4 Software versions reading 11 Specifications input 15 output 16 performance 17 power consumption 17 start up time 17 temperature 17 Start up time 17 T Temperature specifications 17 U Unpacking modules vii V Versions reading hardware and software 11 W Z Waste from Electrical and Electronic Equipment WEEE directive x DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation
19. odule s card edge See Figure 2 2 on page 11 and Figure 2 3 on page 12 for the location of these LEDs DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Chapter 2 Installation and Operation Setting Locally Controlled Parameters For local control the J1 jumper is used to determine reclocking mode Table 2 2 describes parameters that are accessible locally DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation In the local control reclock setting operation mode all of the settings data status information appears on the CCS control software application control screen however you cannot change any setting in this mode via the CCS control software application Table 2 2 DA SR6802 DL and DA HR6802 DL Local Control Reclock Modes Reclock Mode Description AUTO Default Automatically detects the rate if no selection rate jumper is selected the selection will be AUTO 270 Forces reclocker to lock to a 270 Mb s signal Set the jumper on the pin that allows the reclocker to handle 270 Mb s data only If 270 reclock mode is selected the 270 Mb s LED will turn on If the module can successfully lock to the input the lock LED will turn on If reclocking is not successful the lock LED will turn off and un reclocked data will be present at output L5HD Forces reclocker to lock to a 1 485 Gb s signal Set the jumper on th
20. peration Operation Operating Notes When you change a control parameter on a DA S SR H HR6802 DL module the effect is immediate However the module requires up to 20 seconds to save the latest change After 20 seconds the new settings are saved and will be restored if the module loses power and must be restarted Understanding Parameter Types Most module parameters are adjustable and can be set via a CCS software application see Setting Remotely Controlled Parameters on page 10 and Recalling Default Parameter Settings on page 10 However there are some parameters that are considered read only and cannot be changed Indicated by the abbreviation ROJ these parameters provide status and feedback information only Harris recommends that you use the available 6800 software control options serial local or Ethernet remote to aid in viewing setting and confirming parameter values Adjustable Parameters Two types of adjustable parameters can be changed Numerical parameters require you to select a value within a numerical range Selectable parameters require you to select a specific option Both numerical and selectable parameter changes are immediate Use the available 6800 software controls serial local or Ethernet remote network to view and monitor parameter selections Read Only Parameters These parameters provide status and feedback information only They are represented by LEDs on the front of the m
21. perty sheets fields buttons check boxes list boxes combo boxes menus submenus windows lists and selection names Italics Indicates email addresses the names of books or publications and the first instances of new terms and specialized words that need emphasis CAPS Indicates a specific key on the keyboard such as ENTER TAB CTRL ALT or DELETE Code Indicates variables or command line entries such as a DOS entry or something you type into a field gt Indicates the direction of navigation through a hierarchy of menus and windows hyperlink Indicates a jump to another location within the electronic document or elsewhere Internet address Indicates a jump to a website or URL E Indicates important information that helps to avoid and troubleshoot problems Obtaining Documents Product support documents can be viewed or downloaded from our website Alternatively contact your Customer Service representative to request a vi document DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Preface Unpacking Shipping Information Unpacking a Product This product was carefully inspected tested and calibrated before shipment to ensure years of stable and trouble free service 1 Check equipment for any visible damage that may have occurred during transit Confirm that you have received all items listed on the packing list Contact your dealer if any item on the pa
22. s of August 13 2005 producers or users are required to recycle electrical and electronic equipment at end of its useful life and must not dispose of the equipment in landfills or by using other unapproved methods Some EU member states may have different deadlines In accordance with this EU Directive companies selling electric or electronic devices in the EU will affix labels indicating that such products must be properly recycled See our website for more information Contact your local Sales representative for information on returning these products for recycling Equipment that complies with the EU directive will be marked with a WEEE compliant symbol as shown in Figure P 2 Figure P 2 WEEE Compliance Symbol DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Chapter 1 Introduction Product Description The DA S SR H HR6802 DL series of distribution amplifiers are designed to process serial digital television signals according to SMPTE 257C 292M 424M and DVI ASI They can also handle other bi level data within amplitude and date rate limitation such as 19 39 Mb s and 38 78 Mb s SSI These distribution amplifiers feature high reliability excellent video performance and low cost Main Features DA S6802 DL The individual modules are available as follows The DA S6802 DL is a 1x8 looping input SD ASI distribution amplifier The DA SR6802 DL is a 1x8 looping input SD ASI distrib
23. tect and report Automatic input cable equalization Card edge control by jumpers with LED display Remote control and monitoring via Ethernet One input eight reclocked outputs one looping output Passive looping Handles data rates 3 0 Gb s and below Input signal presence detect and report Automatic input cable equalization Automatic and manual reclocking 270 Mb s 1 485 Gb s 2 97 Gb s or DVB ASI Reclock status and rate report by LEDs Automatic bypass reclocking stage if not relockable Enforce bypass reclocker is available Card edge control by jumpers with LED display Remote control and monitoring via Ethernet DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Back Modules DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Chapter 1 Introduction DA S SR H HR6802 DL modules can be installed with double width looping back modules in their host frames These modules cannot be installed in 6800 7000 series frames Figure 1 1 shows the double width looping back connector module used by the DA S SR H HR6802 DL Figure 1 1 DA S SR H HR6802 DL Double Width Back Module Chapter 1 Introduction Signal Flow Figure 1 2 Signal Flow Diagram 4 DA S SR H HR6802 DL Installation and Operation Manual Copyright 2009 Harris Corporation Chapter 2 Installation and Operation Installation Procedures N caution Before installin
24. ution amplifier with reclocking The DA H6802 DL is a 1x8 looping input 3 Gb s HD SDI SD SDI and ASI distribution amplifier The DA HR6802 DL is a 1x8 looping input 3 Gb s HD SDI SD SDI and ASI distribution amplifier with reclocking You can control and monitor these distribution amplifier modules locally via jumpers and card edge LEDs or remotely via optional ICE6800 or 6800 ETH Ethernet connection One input eight non reclocked outputs one looping output Passive looping Handles data rates 540 Mb s and below Input signal presence detect and report Automatic input cable equalization Card edge control by jumpers with LED display Remote control and monitoring via Ethernet DA S SR H HR6802 DL Installation and Operation Manual 1 Copyright 2009 Harris Corporation Chapter 1 Introduction DA SR6802 DL DA H6802 DL DA HR6802 DL One input eight reclocked outputs one looping output Passive looping Handles data rates 540 Mb s and below Input signal presence detect and report Automatic input cable equalization Automatic reclocking 270 Mb s SD or DVB ASI Reclock status and rate report by LEDs Automatic bypass reclocking stage if not relockable Enforce bypass reclocker is available Card edge control by jumpers with LED display Remote control and monitoring via Ethernet One input eight non reclocked outputs one looping output Passive looping Handles data rates 3 0 Gb s and below Input signal presence de
Download Pdf Manuals
Related Search