SMP 525EL - SMP Canada
Contents
1. Canada service technician or by a person authorized to carry out such work by SMP Canada and The bed is used in accordance with the instructions given in the user manual 9 Explanatory notes for caregivers This documentation contains all information necessary for the normal operation of the SMP electric hospital beds SMP accepts no guarantee claims whatsoever for damage injury or accidents caused by carelessness inattentiveness or the incorrect use of the SMP electric hospital beds In this connection the question of liability is irrelevant If required by the customer SMP or its representative is willing to give caregivers basic training in the operation of the bed The participation in such training sessions for caregivers must be confirmed with name date and signature on a form specifically intended for this purpose which must be counter signed by SMP or its representative The safety regulations contained in this documentation must be strictly obeyed and adhered to at all times Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL The conscientious observance of the safety regulations modes of behavior and instructions described in this manual guarantees the safety of caregivers and patients Please note that functional features marked as special equipment are only available in bed which comes equipped with them 9 1 Mechanical initiation Push the head and footboards supplied into the corner con2. P4 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL 1 Performance Characteristics 1 1 Moveable headboard and footboard for easier access to the patient SMP s ergonomic design allows caregivers to have access to the patient s head or feet by instantly removing the headboard and the footboard 1 2 5 Function Electrical Features SMP 525EL bed allows you to adjust the bed in 5 different positions e a Automatic adjustment of height b Automatic adjustment of upper leg c Automatic adjustment of the back section d Trendelenburg e Reverse Trendelenburg 1 3 Automatic lifting side rails It makes a world of a difference to have the luxury of retracting side rails installed on a bed It can be used as an added safety measure to limit the patient from rolling out of the bed or simply have it as a support for the patient to get in and out of the bed 1 4 2 section IV pole with 4 hooks made from stainless steel Our engineers have designed the bed in a way that the IV pole can be installed in all four corners of the bed The installation takes only a few moments so that the caregivers can spend more time caring for patients 1 5 Central locking brake system SMP 525EL is ergonomically designed with caregivers and patients in mind This is why we have developed a central brake system which can be engaged and released by a centrally located foot pedal 1 6 Back and foot adjustment allows for an anatomica
3. section UP continuously raises upper leg section so that the knees bend Upper leg section DOWN continuously lowers upper leg section into horizontal plane Height UP lifts whole mattress frame to the required height Height DOWN lowers whole mattress frame to the required level Important To prevent the unauthorized use of the bed the caregivers keyboard is equipped with a deactivation device relating to certain functions 11 1 Electrical adjustment of back rest Raise back rest by pressing the arrow or the patient s control on the caregivers control Lower back rest by pressing the patient s control on the caregivers control or The mattress frame back section can be raised to a maximum of 65 While raising the back rest shifts towards the headboard by a maximum of 150 mm mattress displacement facility This increases the patient s comfort by stopping him her from sliding down the bed P18 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL 11 2 Electrical adjustment of upper leg section Raise upper leg section by pressing the up arrow caregivers control or the patient s control Lower upper leg section by pressing the down arrow caregivers control or patient s control The mattress frame back rest can be raised to a maximum of 65 While raising the back rest shifts towards the headboard by a maximum of 150 mm mattress displacement facility This increases the pat
4. the required angle of tilt has been reached The pre set maximum angle of tilt amounts to 10 For the reverse trendelenburg position press the key until the required angle of tilt has been reached Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL 11 5 Use of Side Rails 11 5 1 Operation of side rails The SMP 525EL comes equipped with split side rails on both sides When not in use the frames are pushed down This gives unobstructed access to the accessories bar and facilitates the use of bed jacks even when the bed is in lowest position When raised the safety frames e protect patients against falling out of the bed e support patients when accessing or exiting the bed 11 5 2 How to raise side rails Pull side rails vertically till you hear a clicking noise The latch locks the side rail to the frame 11 5 2 How to lower the side rails Pull the latch attached to the side rail and simultaneously push the side rail down to its lowest position To protect patients the side rails can be raised individually or together as appropriate Raising all four frames provides patients with complete protection The side rails can be used in four possible configurations on each side 1 All 4 side rails fully lowered 2 Head end side rail raised to top edge of mattress and foot end side rail lowered aid for exiting the bed allows caregivers to carry out procedures with raised safety frame 3 Head end si
5. ER MANUAL GENERAL PATIENT ROOT SMP 525EL 3 Warranty and liability We accept liability for possible errors and omissions within the terms of warranty laid down in the main contract Claims for damages from whatever legal grounds they may be held to derive are expressly excluded We reserve the right to make technical changes to the hospital beds described in this user manual in accordance with technical developments We accept no liability whatsoever for any damage and or disruption caused by faulty handling and or a failure to follow the instructions in this user manual 4 Safety regulations The SMP 525EL may only be put into service operated and used a as intended by manufacturer b in accordance with the provisions of the medical products law MPL and it s enacted statutory instruments c with due regard to good technical practice d in accordance with safety and accident prevention regulations On no account may the bed be used in a faulty condition that could endanger patients caregivers or others The hospital bed may only be operated by those able to guarantee its correct handling by virtue of their professional qualifications knowledge and or experience 4 1 General safety instructions CAUTION Refer to user manual Please read safety instructions WARNING Serious injury can be caused when moving powered parts of the bed Make absolutely sure that there are no parts of the body protruding
6. GENERAL PATIENT ROON SMP 525EL P12 6 Before using the bed for the first time Before the bed is put into service for the first time this user manual must be read carefully by all those responsible for nursing care Before the bed is put into service for the first time it is absolutely essential to carry out a functional test Before using the bed for the first time caregivers must receive detailed instructions in the operation of the bed In addition caregivers must fully be made aware of potential dangers that can arise in spite of the correct operation of the bed 6 1 Functional test A functional test must be carried out in the following circumstances Ss SS When the bed is put into use for the first time When the bed is to be used by a new patient When the bed is put back into use after a period in storage When the bed is put back into use after cleaning and or disinfection When it is necessary to identify incidents of malfunctioning or faults At least once a year 6 2 Carrying out a functional test _ Check all visible components for damage distortion breakages and broken cables Using caregiver s controls move all mattress frame sections into end position and ensure that end stop switches turn motors off no sound of motors acoustic test Using caregivers keyboard raise and lower jack to upper and lower end stops Check for parallel movement of mattress frame relative to bed frame When en
7. Rev 2 11 P3 USER MANUAL GENERAL PATIENT ROO SMP 525EL 6 Before using the bed for the first EMG sta 12 CFPC OV ST a A NE E AOE E AE N AEA 12 6 2 Carrying out Un cuotas E E E E E S 12 VNC AMINE anda teca a E A T O AAS 13 7 1 Cleaning and disinfection Wipe and spray disinfectiON ooccccccccnonocnnnncnonanononnnononanccnnonononaronnnnononnanrnnnncnnnnnionnns 13 8 Service and maintenant E sn 14 8 1 Maintenance IIISEFUCTIONS Sesma ii 14 97 Explanatory notes TOR Cal CC IVCIS atea 14 gL Mechanical Mari to 15 52 Electrical U1 OM isis 15 TO Types of patient POSTEO MINTS ones idad 16 A e A eee 17 11 1 Electrical adjustment OF Dack TES Carme 18 11 2 Electrical adjustment of upper leg SECTION ccccccceessssceccceceeesecceccceeuseeecccseceesseececceausneceeeesauenseesecsseeusneceeetsaggeseess 19 13 He lenta diustaentor Dedo as iaa or OE 20 11 4 Trendelenburg and reverse trendelenburg positioning cccccccccceesseeecccceceesseccccceeueeeeeeceseueeseeeeeeseeueneceseesaugseess 20 1S Ue oi Sde Rai A e o A e O RO UE II A 21 11 5 1 Operation of side Tall Susan 21 1TL5 2 How COs se side Palta ita 21 11 5 2 How to lower the side all nicas aiii ii 21 11 6 Four Castor Central Locking Brake system cms aia 22 11 7 Installation and Removal of headboard and footboard occcccccnncccncnnnccnnononocinonancnnnonanonononanonanonanannnonarnnnnonininnnnnns 23 12 2 Environment Conditions for Ususario iada 23
8. Solutions Start Here Solutions Start Here www smpcanada com SMP Canada 10 Sims Crescent Richmond Hill Ontario L4B 1K9 Canada Tel 905 764 7767 Fax 1 866 627 9798 support smpcanada com USER amp MAINTENANCE MANUAL www smpcanada com support smpcanada com Tel 1 905 764 7SMP 1 905 764 7767 Fax 1 866 627 9798 10 Sims Crescent Richmond Hill Ontario L4B 1K9 Canada USER MANUAL GENERAL PATIENT ROO SMP 525EL About Us We are a company that draws on innovation and excellence to provide solutions that enhance the ability for caregivers to effectively fulfill their duties Our goal is to build a high performing medical technology company that gives healthcare providers the tools they need to achieve better outcomes We are committed to helping our customers deliver safer more efficient technologically advanced equipment to the market place Caregivers throughout the world look to us for solutions because we strive for excellence and adhere to their suggestions for improvement We bring the passion dedication innovation and the drive in developing solutions that matter in making a difference in the lives we help save At SMP we believe results speak louder than words Our company is one that sets high standards with an emphasis on paying attention to details We are passionate about raising the bar and regularly surpass our own ambitious goals Our products comply with and conform to world renowned healt
9. d stop is reached ensure that motors switch off no sound of motors acoustic test The selected function must move in the correct direction Operate trendelenburg function until it reaches its maximum angle Return to the start position by operating the reverse trendelenburg function Using the handset briefly move the back rest upper leg section and jack in both directions Check brake functions apply brakes release brakes and release brake with directional setting by operating brake bar Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL The bed is always operational In case of malfunctioning or faults inform the responsible service agency Warning Make sure all functions are working correctly If a fault is found the bed must be taken out of use immediately and not put back into use until the fault has been corrected 7 Cleaning and disinfection Risks can arise through the incorrect cleaning and or disinfection of the bed 7 1 Cleaning and disinfection Wipe and spray disinfection The use of chemical solvents abrasive cleaning agents of any kind and organic solvents such as halogenated or aromatic hydrocarbons and ketone is not permitted The use of highly concentrated caustic soda Is also not permitted Follow these instructions when using cleaning agents and or disinfectants gt Decontaminants in the prescribed concentrations may not exceed or fall below a pH value of 6 8 They
10. de rails fully raised and foot end side rails fully lowered aid for exiting bed 4 All 4 side rails fully raised P21 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROOT SMP 525EL These four configurations make the SMP electric bed highly flexible to use 1 With all side rails down caregivers have unhindered access to the mattress frame The bed looks like a normal bed hence contributing to a pleasant and unthreatening atmosphere 2 With head end side rails raised to the top edge of the mattress and foot end side rails lowered patients can use the side rail as an aid for getting into and out of the bed In this position the side rails clearly mark the limits of the mattress frame while at the same time allowing patients to come and go at will Furthermore care procedures can be carried out without first having to lower the side rails 3 With head end side rails raised and foot end side rails lowered patients can use the side rails as an aid for getting into and out of bed In this position the frames clearly mark the limits of the mattress frame while at the same time allowing patients to come and go at will Caution Danger of entrapment when foot end side rails are later raised 4 When all four side rails are fully raised patients enjoy the greatest possible protection against falling or rolling out of the bed 11 6 Four Castor Central Locking Brake system A brake bar is fitted at the foot end of the chassis for op
11. e with international standards and carry the CE seal This confirms that they fulfill the safety requirements relating to medical products This user manual is intended to give you and your staff practical information and tips on the safe and correct use of the SMP five function electric hospital bed When putting the bed into service for the first time or when performing operations and maintenance it is highly recommended to read this manual and strictly abide by and enforce the safety procedures in this user manual To avoid faulty handling and to ensure the trouble free operations it is highly advised to have this document available to caregivers and or patients at all times Secondary Medical Products Canada Inc SMP Canada 10 Sims Cres Richmond Hill Ontario L4B 1K9 Canada Tel 1 905 764 7767 Fax 1 866 627 9798 E Mail info smpcanada com Website www smpcanada com P2 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL Table of Contents General Remarks User Manu en nn E ee E EE EE 2 1 Performance Coacalco 5 1 1 Moveable headboard and footboard for easier access to the Patient cccesscccccccssssececeeeeeeeeeeceseeeeseeceeeeeueneceeeees 5 1215 Puncuon Electrical Features tidad conan 5 La Automatic lifting ide tl lada 5 1 4 2 section IV pole with 4 hooks made from Stainless Steel oooooocccoooonnccnnnonononononononanncnnonnnonononononnnorocnnnnnnonanonononons 5 1 5 Centra
12. ed with a built in electronic safety switch that hinders the overloading of the drives In the event of overloading the drives are automatically switched off 5 Intended use SMP s electric hospital beds are intended to be used solely for the care of patients in patients rooms in hospitals clinics and or nursing institutions Any use of SMP hospital beds that deviates in any way whatsoever from this intended use is expressly excluded from possible liability claims 5 1 Incorrect use The incorrect use of the bed can be a source of danger Examples of incorrect use are e Incorrect operation of electrical functions and unsupervised positioning e Use of hospital bed with children under 12 e Operation of hospital bed by patients without prior instruction e Simultaneous operation of electrical functions by different people e Constant operation of keyboard piano playing e Connecting electrical devices to the bed which are not suitable for the purpose intended subject to management s discretion e Moving bed by pulling on cable e Disconnecting electric plugs by pulling on cable e Using bed on sloping surfaces with gradients in excess of 10 bed brakes designed for a maximum gradient of 10 e Trying to move bed with brakes applied e Transporting patients by towing or pushing bed with a vehicle e Using bed with loads in excess of specified maximum safe working load P11 Form 197 Rev 2 11 USER MANUAL
13. erating the central braking system The brake bar has 2 switch positions e pointing downwards towards floor all brakes fully applied e pointing upwards towards the footboard all brakes fully released Warning The brake must always be applied when patients are accessing or exiting the bed Make absolutely sure that the brakes are always applied when the bed is in use unless if the bed is being moved to another location P22 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL 11 7 Installation and Removal of headboard and footboard The headboard and footboard can be pulled off or pushed onto their respective holders on the head end or foot end cross members without the help of any tools Review the pictures below before installing or removing the headboard and the footboard The back of the headboard and the footboard is equipped with two secured lock hinges When installing the headboard and the footboard place the hinges on the holders located in both corners of the frame and press the headboard and the footboard down to lock the hinges To remove the headboard and the footboard release the lock on the top hinges of the headboard and the footboard and pull it 12 Storage amp Environmental Conditions 12 1 Environmental Conditions for Transport and Storage 40 c 70 C Relative Humidity 95 non condensing SOkPa to 106 Kpa Must be in its lowest position the mattress frame Position for Transp
14. est must not only be carried out before first use but continuously throughout the service life of the bed If necessary the bed must be tested daily or after each shift to ensure that its use does not endanger anyone To reduce maintenance to a necessary minimum the bed should be cleaned disinfected and tested as soon as possible after each use so that it can be used again without delay or risk In cases of malfunctioning it may be necessary to transfer the patient to another bed 4 3 Position of the hospital bed Danger if falling out of bed In the case of unsupervised patients we recommend that the bed is put into its lowest position to minimize the risk of injury due to the patient falling out of the bed In other cases the bed should be put at a height proportionate to the size of the patient P9 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROOD SMP 525EL P10 4 4 Four castor central braking system Caution Risk of accident Unless in transport the brakes must always be applied so that patients can use the bed as a support when accessing or exiting it Serious falls can result through an un braked bed rolling away After applying the brakes check that the bed is completely immobile i e that the brakes are fully applied to all four castors 4 5 Height adjustment Risk of entrapment between bed frame and chassis When adjusting the bed make absolutely sure that no limbs bedding or other objects are situated be
15. hcare standards such as NFPA HTM CSA CE FDA IEC UL and ISO 13485 We continually strive to achieve superior clinical results We push the frontiers of medical research while maintaining uncompromising clinical integrity Our strategic relationship extends out to over 30 partners globally Our partners rely on us regularly to provide quality turn key solutions to better serve the health care industry We take great pride in providing accredited products that meet and exceed industry requirements At SMP we don t just make promises we deliver results ant ERTE PONA PE YA YY So 134850 USER MANUAL GENERAL PATIENT ROC SMP 525EL Caregivers amp Patient s controls conviently located for easier access Detachable Footboard Luxuary Siderail y ae l Caregiver s Electrical Control Central Locking Break Pedal 6 Directional Castor Choice of different laminate Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL General Remarks User Manual We congratulate you on your choice of an SMP five function electric hospital bed and would like to thank you for your confidence in our company and its products You have purchased an SMP 525EL electric hospital bed developed and manufactured in accordance with the currently available technical knowledge SMP Canada s electric hospital beds fully meet all safety and operational requirements They are tested in accordanc
16. ient s comfort by stopping him her from sliding down the bed Warning When lifting the back section with raised safety frames it is absolutely essential to make sure that the limbs of patients or others are not poking through or resting on the safety frames P19 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL P20 11 3 Height adjustment of bed Raise the whole mattress frame by pressing the key on the caregivers control or the patient s control All fe Q Lower the whole mattress frame by pressing the key on the caregivers control or the patient s control Warning To avoid the risk of injury to patients we recommend that the bed is fully lowered when in routine use Warning Before lowering the bed make sure that the space between the mattress frame and the chassis is free of persons limbs bedding or any other objects Ensure that brakes are fully applied before the patient s access or exit the bed Warning When lifting or lowering the mattress frame with raised side rails it is absolutely essential to make sure that the limbs of the patients or any other objects are not poking through or resting on the safety frames 11 4 Trendelenburg and reverse trendelenburg positioning The SMP electric mattress frame can be put into the trendelenburg and reverse trendelenburg position required by caregivers irrespective of the height of the bed For the trendelenburg position press the key until
17. l locking brake System cccccccccssssscccccceesseecceceeueeecceseeuenscececsaueeseecssecseuneecesessauseceseseueesseecessuausneeseetsageneeeesteas 5 1 6 Back and foot adjustment allows for an anatomically correct sleep surface oocccccnnconncccnnnnnnnnnannnnnononananononcnonaninonnos 5 1 7 Trendelenpure POSITION arcada dci 5 1 8 Reverse Trendelenburg Pos OM tdi A ii 6 1 9 6 castors for easier ManeuvVer ablar tas 6 LOS DUDES aos tae 6 1 11 Caregivers supervisory control Panels arial cd 6 PARS e a QIN AU a E AA S O PU O O E EE EE o EE A N 7 FIN AAI and MaD AP RP e e OO a E O N 8 Alo e POCO E E E E E A ee any E A ee 8 11 General safety INSTUCUONS ads 8 4 2 Checking the operational safety and condition Of the bed ccccccoocccncnnccnnnconnnnnnnnanaconnnnnonanocnnnnononanonnnnnocnnaccnnncnnonoss 9 4 3 Position of the hospital bed Danger if falling out Of bed oooonncnnncncnnnnccnnnncnonaconnnnnononocnnnnnnnnnconnnnnnonnnncnnnncnnnnanoss 9 4 4 Four castor central braking system Caution Risk Of accident occcccccncnncncnnnnnonononnnnnnnnnarononnnonanaronnnnnnnnanornnnnnnnas 10 4 5 Height adjustment Risk of entrapment between bed frame and chassis csssccccccesssseecceeeeeeeseececeseeeeeeeeeeeeanees 10 4 6 Side Ralls Danger orentrapm edita ies 10 ASES Cal ads 10 IS Operatoria odo ere 10 A en O E O e O o O OA 11 o yA PI e a O 0 Ei010E SO III A 11 DU MIC OR OC US n R E E E 11 Form 197
18. lly correct sleep surface There are times when the patient needs to sleep in an anatomically correct sleep surface SMP 525EL allows you to adjust the back section 0 65 and the foot section 0 45 1 7 Trendelenburg Position To allow better access to the pelvic organs SMP engineers introduced 0 10 trendelenburg capability in the SMP 525EL This is a standard position used in abdominal and gynecological surgery P5 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL P6 1 8 Reverse Trendelenburg Position This position is a common surgical position SMP 525EL allows maximum angle of 0 10 for this position 1 9 6 castors for easier maneuverability SMP 525EL is ergonomically designed for the safety of the caregivers and the patients We understand that continued strenuous activity can take a toll on the caregivers body This is why we have designed and installed 6 castors on our beds so that caregivers can have a lot less strain on their bodies while pushing the bed Our castors have passed the load bearing test of the European council directive 2002 95 EC amp 2005 618 EC 1 10 Side bumpers In emergency situations when you are pushing the bed from patient room to surgical room the last thought on your mind is to protect the bed from scrapes and scratches That is why we have specially designed light weight bumpers and installed them on all four corners of the bed 1 11 Caregivers supervisory cont
19. may not contain any corrosive or caustic substances They may not contain any substances that alter surface finishes or the adhesive properties of plastics They may not affect the properties of lubricants Water hardness may not exceed 0 9 mmol l to 5 d VV VV Fully desalinated water may not be used Chloride lt 100 ppm Silicate as Sio2 lt 15 ppm lron lt 0 05 ppm Manganese lt 0 01 ppm Copper lt 0 05 ppm We accept no liability for damage to surface finishes caused by the use of unsuitable cleaning agents and or disinfectants by the use of incorrect concentrations of such cleaning agents and or disinfectants or by the incompetent or inappropriate cleaning of the bed P13 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL P14 8 Service and maintenance The SMP 525EL bed requires very little maintenance All moving parts of the lifting gear mattress frame drives and safety frames are permanently lubricated during manufacturing process None of these parts need re lubrication when the bed is correctly used and cleaned The manufacturer assumes however that beds are regularly inspected and damages such as worn parts loose screws or fractures are immediately put right 8 1 Maintenance Instructions In case of repairs and maintenance work carried out on the bed SMP only accepts liability for its safety and functional efficiency when Delivery maintenance and repair were carried out by a SMP
20. nectors of the bedframe Usea screwdriver to remove the cover over the connecting block Apply brakes In some scenarios the brakes are not applied when the bed is put into service for the first time or brought back into service after a period of non use Press down the foot operated brake bar to apply the brakes When brake bar is at an angle of 45 to the floor brakes are completely applied Fit accessories 9 2 Electrical initiation Input plug into mains socket e Press Red button underneath the headboard to ON position Cig e Hold on to the lock button 2 on the function keypad till the light turns green e Carry out functional test The bed is now ready for use Warning The functions of the bed will only work if the light on the keypad is on Once the light turns off the functions will automatically stop working Operation with SMP electric keyboard P15 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL 10 Types of patient positioning TT 0 A JL REVERSE TRENDELENBURG POSITIONING FLAT POSITION height adjustment FOOT RIGHT DOWN o SS Lp ne A TRENDELENBURG POSITIONING HEAD RIGHT DOWN RAISED BACK SECTION ANS RAISED UPPER LEG SECTION P16 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL 11 Operation Functions 3 cal 35 TET co se S6 DD 38 es Pic 1 Di The function of each press button is a
21. ort must be completely flat 12 2 Environment Conditions for Use 10 C 30 C Relative Humidity 20 to 85 non condensing 70 kPa to 106 kPa The bed is authorized for use solely in dry rooms not in wet rooms such as bathrooms The bed is mobile without the need for auxiliary transport equipment The bed may only be moved on firm surfaces Moving the bed over obstacles greater than 2cm in height is prohibited Slopes may not exceed an angle of 10 The bed is supplied complete and can be set up without first having to remove transport equipment P23 Form 197 Rev 2 11 sie USER MANUAL SMP ANY GENERAL PATIENT ROO SMP 525EL NOTES Form 197 Rev 2 11 sie USER MANUAL SMP ANY GENERAL PATIENT ROO SMP 525EL NOTES Form 197 Rev 2 11
22. rol panel The caregiver s supervisory control has been conveniently placed at the footboard of the SMP 525EL The functionalities can be locked by a touch of a button on the footboard which prevents access to the functions on the side rails Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL 2 Technical Data Bed Length with Standard sleep deck ooo 228 6 cm 2286 0 mm Width with side rails Up 110 9 cm 1109 0 mm Width with side rails downN cccooncccccnncnnnnnccnnnnnnos 93 0 cm 930 mm Height of Sleep Deck in low position 51 cm 510 mm Height of Sleep Deck in high position 70 cm 700 mm Under bed Clearance ccccoonnccncncnnonononnnnnononcncnnnccnnnnnos 13 9 cm 139 0 mm Head Section ArticulatiON ooccccococncnononnnnnnanonnnonoss O through 652 Knee Section ArticulatiON occccoooccnconocnncnnnnnnnnnnnnos O through 452 O 15 0 cm 150 mm Safe Working LOA cccccoooccncncnonocccnnnononccnnnanonaronononos 551 lbs 250 kg Operable Temperature Range cccccccecssseeeeeeeeees 102 C to 402 C Operable Relative Humidity Range u o 30 to 95 non condensing Product withstands storage transportation in temperature range of 402 C to 702 C Product withstands storage transportation in relative humidity range of 10 to 95 P7 Form 197 Rev 2 11 US
23. s below S1 raising the backrest e 2 lowering down the backrest e S3 raising the leg part e SA lowering down the leg part S5 uprising the whole bed e S6 lowering down the whole bed e 7 trendelenburg S8 anti trendelenburg e S9 Reset button to make the bed recover on flat and lowest position On operating please keep on pressing the button till the bed goes down to the lowest e 10 Lock system Lock and unlock Press on this button for more than 5 seconds if indication light D1 is off then function button S1 to S9 is not available if D1 is on S1 to S9 is available D1 indication light D1 is off it is at lock status D1 is on it s at unlock status It is essential to pull out the main plug before transporting the bed P17 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL If the bed is put into storage with disconnected charger then self discharge through leakage leads to the exhaustion of the batteries Totally discharged batteries can be so badly damaged as to necessitate their premature replacement In order to achieve a long service life the correct treatment of both the batteries and the charger is absolutely essential Summary of functions Back rest UP continuously raises back rest to enable patient to sit up Back rest DOWN continuously lowers back rest to enable patient to lie down Upper leg
24. through the safety frames during electrical operation Ensure without fail that there are no people pets or objects beneath the bed WARNING Increased safety measures are necessary when the bed is being used 1 by a child under 12 years of age 2 by a person with reduced mental faculties 3 for psychiatric purposes P8 Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROOT SMP 525EL WARNING In order to avoid falls always return the bed to its lowest position after each use of the adjustment functions Make absolutely sure that a The bed is in lowest position before getting into or out of it and b The brakes are applied WARNING Safety frames only mark the limits of the bed Other appropriate measures must be used to restrain patients WARNING Children under 12 and people with reduced mental capacities may only occupy SMP beds when the safety frames are covered by protective covers as doing so can result in a serious risk of injury Please refer to user manual WARNING Make sure that the cable does not get caught in moving parts WARNING gt Only use original spare parts for repairs gt Only repair bed when it is in lowest position gt Pull out power plug before repair or cleaning 4 2 Checking the operational safety and condition of the bed Before putting the bed into service it is essential to make absolutely sure that it is in good working condition and safe to use This t
25. tween the bed frame 4 6 Side Rails Danger of entrapment Side Rails may be operated only by caregivers instructed in their use Make sure side rails or elements of them are either fully raised and locked or fully lowered During the electrical adjustment of the mattress frame make sure that the patient is not touching the side rail Also make absolutely sure that no limbs are poking through the frame We also recommend the use of safety frame covers Failure by caregivers to obey these safety rules may cause hematoma or other injury to hands knees fingers feet shins and hips through entrapment 4 7 Electrical Safety The bed is fitted with a connection for a voltage compensator It is supplied with electricity via the power cable and is isolated from the main circuit by a safety switch when not in use 4 8 Operating interval Automatic safety devices kick in if the maximum operating interval of 1 minute is repeatedly or noticeably exceeded leading to the power drives cutting out The bed must then be inspected and tested An integrated time lag device hinders the accidental or brief operation of the keyboard and on sequent movement of the mattress frame This device requires that users consciously press and hold down the relevant key Functions then kick in after a time lag of ca 0 5 seconds Form 197 Rev 2 11 USER MANUAL GENERAL PATIENT ROO SMP 525EL 4 9 Built in safety switch The bed is fitt
Download Pdf Manuals
Related Search