User Manual - Vinpower Digital
Contents
1. Port 1 is passed and Port 2 are not used in this example Step 11 Remove all duplicated hard drives Afterwards you can either Duplicate more hard drives by repeat step 1 4 and 11 skip step 5 and 6 Or End the job and go back to the main menu by pressing the ESC button Z Z Z Z Z Z ZJ Z ZJ GZ J Chapter 4 Device Menu Overview This system comes with many features that can be accessed adjusted by various functions and settings within the operation menu Please see the detailed descriptions below 1 Copy This process will copy the source hard drive which is inserted into the Source Port onto one or multiple target hard drives simultaneously 2 Copy Compare This function performs the Copy process after which it will perform a Compare process automatically to ensure data accuracy 3 Erase This function erases the hard drives s connected to any port other than the Source Port There are three options for this function e Quick Erase It will erase only the beginning section of the hard drive which is just enough to make it look empty Erase Quick Erase Smart Copy RAW Copy Device Scan Shutdown e Full Erase It will erase the entire hard drive by writing O s throughout The erase timeframe varies depending on the data capacity of the hard drive Erase YN Full Erase ae oO Smart Copy RAW Copy DeviceScan Shutdown e DOD Erase It will erase t2. lt f7NPOWER picITaD The Future of Optical Storage User Manual For Hard Drive Duplicator V 1 0 WARNING THIS FLASH MEMORY DUPLICATOR IS MEANT FOR BACK UP AND DISTRIBUTION OF ORIGINAL DATA AUTHORED OR OWNED BY THE USER ANY COPIES MADE FROM THIS FLASH MEMORY DUPLICATOR ARE THE COPYRIGHT OWNERSHIP OF THE AUTHOR OR COMPANY WHO OWNS THE SOURCE DATA ANY UNAUTHORIZED COPYING EDITING OR ANY PART THEREOF OF COPYWRITTEN MATERIAL IS STRICTLY PROHIBITED WE DISCOURAGE THE USE OF ANY SUCH ACTION THAT GIVES RISE TO CRIMINAL INTENT AND PROSECUTION THE SELLER OF THIS PRODUCT IS NOT RESPONSIBLE FOR ANY POTENTIAL ILLEGAL ACTIONS OF THE USER DUE TO ACTIVITIES BEYOND THE SCOPE OF THE PRODUCTS INTENDED USE Copyrights and Trademarks ALL RIGHTS RESERVED NO PART OF THIS PUBLICATION MAY BE REPRODUCED IN ANY MEDIUM PRINTED OR ELECTRONIC WITHOUT THE PRIOR WRITTEN PERMISSION FROM VINPOWER INC COPYRIGHT 2000 2012 ALL RIGHTS RESERVED Table of Contents Chapter 1 Introduction amp Manual OV rVieW 1 1 csscceccnssensennsnnsennsnnsensennsnseunennsensens 1 Before geting SlaneG n25s3 peeled ee 1 PACKAGE CY Cane Nee EE ore ee ef tee ee eee ee oN to ee eee ee ee ere 2 Chapter OVEIVIEW eee ene oe ee eee eer ree 2 Chapter 2 Getting to KNOW the SYStOMM 1ccssccecceeccsnccnnscnnsenssennseensnnscnnsenssenssenssnsssnsses 3 VCN IN CTION ease ope nee O RA Mena ee Ra ea Se es ee 3 LCD Display amp Operation Panel ccccccseec
3. past 24 hours please leave the system in a warm room with a temperature of at least 65 F 19 C for 4 hours prior to powering on the unit for the first time Failure to do so may cause irreparable harm and prevent the system from functioning properly Maintenance It is very important to operate and keep the system in a dust free clean environment since dust is the number one killer of electronic devices Failure to do so may severely damage the system It is strongly suggest that an Air Cleaner be placed next to the system and that an air duster canned air be used consistently to clear off any dust which may accumulate on the surface of the system Proper Shutdown To avoid possible system failures the system needs to be shutdown properly To shutdown the system press the Up or Down Arrow button until the Shutdown menu is appears and then press the ENT button Follow the instructions on the screen to shutdown the system properly Turning off the system without performing this function will increase the risk of damage to the system Package List e Hard Drive Duplicator 1pc e System Power Cord 1pc e System Operation Manual 1pc Chapter Overview Chapter 2 Getting to know the system This chapter describes the physical features and instructions of how to operate the system Chapter 3 Basic Operations Tutorials This chapter describes how to perform basic operations like Making Copies etc Chapter 4 M
4. protective earth circuit This equipment is supplied with a plug that has a protective earth pin This plug will only fit into an earthed electrical outlet This is a safety feature If you are unable to insert the plug into the outlet contact a licensed electrician to replace the outlet Disconnect Device The power cable is the disconnect device for this equipment It is attached to the back of the machine as a plug in device To remove all electrical power from the equipment disconnect the power cable from the electrical outlet Emergency Power Off lf any of the following conditions occur turn off the machine immediately and disconnect the power cable s from the electrical outlet s Contact an authorized Service Representative to correct the problem e The equipment emits unusual odors or makes unusual noises e The power cable is damaged or frayed e A wall panel circuit breaker fuse or other safety device has been tripped e Liquid is spilled into the machine e The machine is exposed to water e Any part of the machine is damaged Maintenance Information 1 Any operator product maintenance procedures will be described in the user documentation supplied with the product 2 Do not carry out any maintenance on this product which is not described in the customer documentation 3 Use supplies and cleaning materials only as directed in the Operator section of this manual 4 Do not remove covers or guards that are fastened w
5. the Setup menu to avoid unnecessary errors However by 206 doing this there may be some data empty spaces not copied Please use with caution If copying under RAW mode it might be advisable to try Smart Partition mode since it copies only data unallocated area nothing else If copying under Smart mode it is possible that the data is heavily fragmented To prevent the efficient effect of Smart mode please defragment the source hard drive Description The password entered is not correct 240 o d Possible Solution l e Please confirm the correct password was typed or try a different password Description An incorrect password was entered 3 times consecutively 241 Login Failed Possible Solution e Wait for 5 minutes then try to use the correct password for the next attempt If the problem persists call Tech Support Error Error o Description amp Recommended Solutions _ Description The system CANNOT locate the Firmware Update File during the Update Firmware process Possible Solution Confirm the file is not a zip file If it is please extract it before transferring it to a hard drive Confirm the file system of the hard drive is FAT 32 Make sure the hard drive is inserted into the source port Description The Firmware Update File is not compatible with the system or the Firmware Update File is corrupted Possible Solution 260 261 e Try to re download
6. all warnings and instructions that are marked on or supplied with the equipment Before cleaning this product unplug the product from the electrical outlet Always use materials specifically designated for this product the use of other materials may result in poor performance and create a hazardous situation Always exercise care when moving or relocating equipment Always locate the machine on a solid support surface not on plush carpet that has adequate strength to support the weight of the machine Always unplug this equipment from the electrical outlet before cleaning A Do not use aerosol cleaners Aerosol cleaners can be explosive or flammable when used on electromechanical equipment Warning Not Do These Never use a ground adapter plug to connect the equipment to a power outlet that lacks a ground connection terminal Never attempt any maintenance function that is not specifically described in this documentation Never obstruct ventilation openings They are provided to prevent overheating Never remove covers or guards that are fastened with screws There are no operator serviceable areas within these covers Never locate the machine near a radiator or any other heat source Never push objects of any kind into the ventilation openings Never place this equipment where people might step on or trip on the power cord Electrical Safety Information 1 The power receptacle for the machine must meet the requireme
7. e Auto Ratio The system will automatically adjust the partition layout under the same ratio as the source hard drive Partition Layout Auto Ratio Smart Copy RAW Copy DeviceScan Shutdown e As It The system will set the partition layout exactly same as the source hard drive regardless the capacity differences Partition Layout As It Smart Copy RAW Copy DeviceScan Shutdown 7 Size Tolerance Normally the capacity of the target hard drive is required to be greater than the source hard drive so that all of the data can be copied without loss However not all hard drives have identical storage capacity even when they are all labeled identically in terms of GB size Thus by enabling the size tolerance the system will allow the target hard drive s capacity to be less than the original hard drive by the percentage specified at the risk of less data loss corruption Setup 7 Size Tolerance Smart Copy RAW Copy Device Scan Shutdown 6 Utilities 1 Compare This function will perform the data comparison process between the source and target hard drive to ensure data accuracy 2 Verify Disk This function will scan all target hard drives for readability 3 Measure Speed This function will perform read and write testes to report the read speed for the source hard drive and write speed of all target hard drives 4 Device Info This function will show information regarding the hard drive connected to the sy
8. enter into the Buzzer menu Step 6 Press the UP or DOWN arrow button to change the option from On to Off Step 7 Press the ENT button once to submit the setting change The menu will change back to the previous menu Setup Step 8 Press the ESC button once to go back to the previous menu the root menu DUPLICATOR H O1 1 Copy Smart DUPLICATOR H 01 5 Setup Setup 1 Language Setup 2 Buzzer Buzzer On Buzzer Off Setup 2 Buzzer DUPLICATOR H 01 5 Setup 5s 1 Chapter 3 Basic Operation Tutorials Making Copies of a Hard Drive The tutorial guide below demonstrates how to quickly duplicate a Hard Drive Step 1 Remove Hard Drive Tray from the system by 1 Press the Tray Button to release the tray latch 2 Pull the tray out using the just released latch If you cannot release the latch by press the Tray Button if is likely due to the tray is being locked you may need to flip the lock knob to unlock position prior removing the tray WQQQQQQQ QQ Insert your hard drives both source and target into the Hard Drive Tray m Make sure Hard Drive s ow bottom screw mount is a inserted into the tray s mounting point 6 Step 3 Step 4 WQQQQQQQ QQ Z Z Z Z Z Z Z Z Z 2 J Insert the hard drive tray with your source hard drives into the Source Bay t
9. enu Overview This chapter describes what each function setting does Appendix A Troubleshooting This section provides many solutions to frequently asked questions and provides insights on system error codes Appendix B Safety amp Regulatory information This section provides environment health safety and other regulatory information Chapter 2 Getting to know the system System Overview Q Note The image below is a representation of the flash duplicator casing The design of the casing may vary but the unit continues to operate using similar principles QQ G ZF JZ Z DZD Figure 1 1 System Controls and Display The components shown in Figure 1 1 are System Power On Off Button Control Panel Source HDD Bay Target HDD Bay HDD Bay Activity LED Power Button HDD Bay Fan Status LED System Ventilation Vents Power Supply Fan Power Cord Input eee a eS LCD Display amp Operation Panel The below image is for reference only Actual screen may vary Smart Copy F1 gt Up Arrow Button e Menu Option Scroll Up gt Down Arrow Button e Menu Option Scroll Down gt Enter OK Button e Enter into the Menu e Execute the Function Submit the Setting change RAW Copy Device Scan Shutdown F2 F3 F4 gt Escape Button e Go back to the previous Menu e Abort the current Function e Cancel the Setting change gt Smart Copy Button e Shortcut to make a copy under Smart mode gt RAW Copy But
10. eted Screen Saver This setting will allow the choice to enable the Screen Saver feature or not By enabling this feature a screen saver will be displayed when the system has been idle for an extended period jJ 4 Read Error Skip This setting will allow for the change to the number of times the system will skip ahead when it encounters a reading error while reading the source hard drive By default the system does not skip any reading error which would result in an immediate job failure if any read error occurred during the duplication process Enable this setting will not fix any discovered error s it will merely skip it and read the remaining data of the source hard drive 5 Write Error Skip This setting will allow for the change to the number of times the system will skip ahead when it encounters a writing error while writing to the target hard drive By default the system does not skip any writing error which would result in an immediate failure for such target hard drive if any write error occurred during the duplication process Enable this setting will not fix any discovered error s it will merely skip it and continue write to the next data block of the target hard drive 6 Partition Layout This setting will allow user to adjust various partition layout options for the target hard drive during the duplication process under SMART Partition mode There are two options for this setting
11. explains the various items on the copy progress screen 88 8G this indicates the amount of data to be copied 3m44s this indicates the time left for the copy operation 30 this indicates the progress of the copy operation 130MB s this indicates the progress of the copy operation Z Z Z Z Z Z Z Z Z GZ JD Turn off HDD Bay Press ENT to Cont Smart Copy RAW Copy DeviceScan Shutdown When prompted power off all hard drive included Bays by pressing the corresponding activity LED Those activity LEDs shall not be illuminated Press ENT button once to proceed Step 10 Upon complete the system will show the job report OK 1 NG 0 12m20s Press ENT to Cont Smart Copy RAW Copy Device Scan Shutdown N Smart Copy RAW Copy Device Scan Shutdown Below explains the various items in the job report e OK 01 indicates the number of copies passed in this process 1 in this example e NG 00 indicates the number of copies failed in this process 0 in this example e 12m20s indicates amount of time took for this process 12 minute and 20 seconds in this example e S 1 2 3 E Indicates the port number S Source Port 1 9 Port 1 9 A E Port 10 14 Source Port and Port 1 2 are shown in this example e o x indicates the result for every individual port above o indicates OK x indicates NG indicates port empty
12. function will increase the risk of damaging the system 1 jh Appendix A Troubleshooting Common Concerns lt b ENAT ALS Nee KNA Na No display on the LCD or the unit does not operate when the power is on Check the power cable connection and that the environment for the power outlet is normal Make sure the power voltage on the duplicator matches the voltage of the power outlet If the system was stored in a location where the temperature dropped below 32 F 0 C within the past 24 hours leave the system in a warm room with temperatures at least 65 F 19 C for 4 hours prior to powering it on The system cannot recognize the hard drive Check to make sure the hard drive tray with the hard drive installed is firmly attached to the system Check to make sure the hard drive is powered by verify the green LED on the hard drive status indicator Buttons do not function The system could still be busy on a task Give it sometime and press it again If it still does not work turn off the machine and then restart the machine after a minute Copy process completed but the copied hard drives are not readable executable Change the Copy Mode to RAW this will likely solve any data related issue Use the Compare function to check that the target hard drive s are identical to the source hard drive The Read Error Skip or Write Error Skip settings under the Setup menu may have turned on inadverte
13. he hard drive thoroughly to avoid any possible chances of recovery User will be prompted for of passes to perform the more pass rounds selected the lower the risk of data contents being recovered but also the longer the time the process will take Erase DOD Erase Smart Copy RAW Copy DeviceScan Shutdown o jJ 4 Copy Mode This setting will allow for the selection of a Copy Mode There are 3 options 5 Setup Smart This mode is the recommended and fastest approach to making copies since it will analyze the source hard drive on supported file systems FAT16 32 NTFS exFAT ext2 3 4 and copy only the area that contains data If the file system on the source hard drive is NOT being supported the system will automatically shifts to RAW mode C Mod a SMART RAW This mode is the safest and slowest approach to making copies since it will copy the entire source hard drive bit by bit Copy Mode RAW Smart Copy RAW Copy Device Scan Shutdown Partition This mode is like RAW mode but it will copy only the valid partitions of the source hard drive along with MBR GPT table bit by bit instead Copy Mode Partition Smart Copy RAW Copy Device Scan Shutdown 1 Language 2 3 This setting will allow you to choose the display language of the system Buzzer This setting will allow the choice to hear a beep sound when a button is pressed or when a task has been compl
14. ince the last time the system was booted up 7 Manage Accounts This menu will allow the Administrator to perform the following user administrative tasks This feature is disabled by default Prior to activating this feature the duplicator recognizes all users as the only activated user defined as the administrator The pre defined password for this menu is 0000 1 View User This menu allows for the viewing of the existing user accounts 2 Create User This menu allows for the creation of additional user accounts Each user has individual settings During this process there are prompts to enter a new user name up to 8 alohanumeric letters or numbers and user password consisting of a 4 digit number for a new account 3 Delete User This menu allows for the deletion of an existing user account During this process there is a prompt to select the existing account to be removed User Admin is the administrative account this account CANNOT be deleted 4 Password on Bootup This menu allows for the enabling disabling pf the user administrative feature prompt user login upon boot up 8 Shutdown This function saves any system settings that have be modified since powering on the system to makes sure it is safe to turn off the system without any loss of settings Once the Ready to Power OFF message appears then the system can be safely turned off via the machine Power Switch Turning off the system without performing this
15. ith screws There are no parts behind these covers that you can maintain or service A Do not use aerosol cleaners Aerosol cleaners can be explosive or flammable when used on electromechanical equipment Warning Regulatory Information Certifications in Europe _CE Mark European Union The CE mark applied to this equipment symbolizes the manufacture s declaration of conformity with the following applicable Directives of the European Union as of the dates indicated 2006 95 EC December 12 2006 Council Directive 2006 95 EC as amended Approximation of the laws of the member states related to low voltage equipment 2004 108 EC December 15 2004 Council Directive 2004 108 EC as amended Approximation of the laws of the member states related to electromagnetic compatibility A full declaration of conformity defining the relevant directives and referenced standards can be obtained from a Authorized local dealer A Scientific and Medical ISM equipment the external radiation from the ISM equipment may have to be limited or special mitigation measures Warning taken In order to allow this equipment to operate in proximity to Industrial zj
16. nst harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Reference CFR 47 Part 15 Section 15 21 Changes or modifications to this equipment not specifically approved by the manufacture may void the user s authority to operate this equipment vj Safety Information Operational Safety Information This equipment and supplies have been designed and tested to meet strict safety requirements These include safety agency examination approval and compliance with established environmental standards To ensure the continued safe operation of the equipment follow these safety guidelines at all times Do These Do Always follow
17. ntly It is possible the skipped data due to read write error may be causing this issue The failure rate is high Make sure hard drive is properly seated prior power on individual HDD Bay Quality of the hard drive may be poor Please try some other name branded flash devices Do need to upgrade the system s firmware Unless the system is getting unstable it is strongly suggested not to upgrade the firmware on the system Please contact Tech Support if the system is getting unstable Cannot boot up or fails to upgrade firmware Contact Tech Support for assistance Error Codes Typically the system will show an error message and error code if a problem occurs Please reference the below diagram for a description of the error codes and the recommended solution Error Error aes Description amp Recommended Solutions Description The Copy process failed due to reading error of source hard drive Bad Possible Solution 162 Master e Try to remove and re connect the source hard drive onto the system e Try to re create a new source hard drive using a PC after a full format Description The content of the source hard drive has a larger capacity than the hard drive s intended to receive the copy Possible Solution e f copying under RAW mode it is common for this message because storage capacities vary among different brands of hard drives It might be advisable to turn on the Size Tolerance setting under
18. nts stated on the data plate on the rear of the machine If there is uncertainty that the electrical supply meets the requirements please consult the local power company or an electrician for advice The socket outlet shall be installed near the equipment and shall be easily accessible Use the power cable that is supplied with the machine Do not use an extension cord remove or modify the power cord plug Plug the power cable directly into a correctly grounded electrical outlet If there is any doubt regarding the correct grounding of the desired outlet consult an electrician Do not use an adapter to connect any equipment to an electrical outlet that lacks a ground connection terminal Do not place this equipment where people might step or trip on the power cable Do not place objects on the power cable Do not push objects into the slots or openings of the machine Electrical shock or fire may result Do not obstruct ventilation openings These openings are used to provide proper cooling to the machine Electrical Supply This product shall be operated from the type of electrical supply indicted on the product s data plate label If there is uncertainty that the electrical supply meets the requirements please consult a licensed electrician for advice A Always connect equipment to a correctly grounded power outlet If in Warning doubt have the outlet checked by a qualified electrician This equipment must be connected to a
19. op bay and the hard drive tray with your target hard drive into all remaining bays Insert the tray with hard drive back to the system by 1 Insert the tray into the bay firmly and completely 2 Close the latch to secure it If you like further secure it from the hard drive tray being accidentally being removed you can lock the hard drive tray by turn the lock knob to the locking position Step 5 Power on the system by pressing the Power button OOO WQQQQQQ QQ j v Step 6 After it has booted up the screen on the left should appear signifying the system DUPLICATOR H 01 is ready 1 Copy Smart Press the F1 Smart Copy button to initiate the copying process Sma y RAW Copy DeviceScan Shutdown Step 7 When prompted power on all hard drive included Bays by pressing the corresponding activity LED Those activity LEDs shall then turn to green ALAALALALAAQ Then press ENT button once to proceed Turn on HDD Bay Press ENT to Cont Smart Copy RAW Copy Device Scan Shutdown s 1 Step 8 Step 9 Copying 8m 9s 130MB s Smart Copy 88 8G 30 RAW Copy Device Scan Shutdown The system will start detecting analyzing source and target hard drives Once preparing process is complete the duplication job will get started The analyzing process may take up to several minutes Please wait with patience Below
20. seecserseecsecseseseceensusesenseseeeceessuseeesesenenees 4 HDD Bay Status LED Reference vsvsceueesceceeeessnceeccendevaieveraeeetsnvaveedesaduaedusedeeetnedae aaeeees 4 MODNA UON ieemereenten fess etn eis sien teat ntonn eis iste anne Pome ee ede net se etey ere ede tet eer aay ae Pe 5 Chapter 3 Basic Operation Tutorials 1 scccccsscceccnscnnscnscnnsnsennsnscusennseeseunsneseusennsensens 6 WUT alate IB GOpIES Oka Aar BD whi eee epee ee ee ei nee eee eee nny ene 6 Chapter 4 Device Menu OVECSVICW 1 c1scssccnncneccnncnnsenncnnennscusennsenseunsanscusenseeseunsnnsenss 12 Appendix A Troubleshooting 1sccsccnccnccnscnnennsnnsnnsnnsnnsnnsensonscnsonscuscnscuseuseuseuseusennens 17 OT Oi Old Ih S aa searontons eaiaiseraleatoa tases citer masa adeaacinteeecneumae ate 17 ENO COOS Srp em REA RN PER E I OE EE ESA ETP eR Te PP 18 Appendix B Safety amp Regulatory information 1 11cccsccssccnscnnsennsenssensennsenssenssenssness 20 Chapter 1 Introduction amp Manual Overview This system is a reliable high performance high speed standalone manual duplication system With its professional industrial design and simple user interface it will make the duplicating experience easier than ever Before getting started Before starting to use this system please read the following to ensure proper operation 1 Temperature Warning If the system was stored in a location where the temperature dropped below 32 F 0 C within the
21. stem 5 System Info This function will show the system s hardware amp software information 6 Load Default This function will reset all of the options back to the manufacture s default settings Perform this function if the system is acting abnormal Perform the Shutdown operation and restart the system in order for these changes to take effect 7 Update Firmware This function will update the software for the system The update file needs to be transferred to a Hard Drive pre formatted as FAT32 file system on a PC There are two options for this function e Format Update HDD This function will prepare a hard drive to be eligible for firmware update by format such hard drive in the source port as FAT16 32 File System sjh e Update This function will perform firmware update with the firmware update hard drive that contains the firmware update file General Firmware Update Procedure a Pre format a SATA Hard Drive using Format Update HDD function b Copy the manufacture certified update file onto such pre formatted hard drive via a PC Mac c Insert such hard drive into the Source Port of the system d Execute the Update function e Restart the system when asked to do so It is strongly suggested that an upgrade to the system s firmware not be performed unless the system is getting unstable and instructed to do so by a technician 8 Save This function will save all the settings modified s
22. the Firmware Update File 62 Description The Firmware Update File is not meant for the system Unknown 2 flash Possible Solution model Toe T ee e Contact Tech Support for the proper Update file Appendix B Safety amp Regulatory information Safety Introduction Notices and Safety Please read the following instructions carefully before operating the machine and refer to them as needed to ensure the continued safe operation of the machine This product and supplies have been designed and tested to meet strict safety requirements These include safety agency evaluation and certification and compliance with electromagnetic regulations and established environmental standards The safety and environment testing and performance of this product have been verified using certified materials only Unauthorized alterations which may include the addition of new parts devices may impact the product certification Please contact a sales representative for more information Warning Marks Labels Symbols All warnings and instructions marked on or supplied with the product should be followed This symbol alerts users to areas of the equipment where there is the possibility of personal injury Warning FCC Notices for USA This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection agai
23. ton e Shortcut to make a copy under RAW mode gt Device Scan Button e Shortcut to detect available devices gt Shutdown Button e Shortcut to perform Shutdown function of the system HDD Bay Status LED Reference Every HDD bay has a corresponding Status LED next to it with Bay labeled on top Below is the reference to the colors LED Color DESCRIPTION Green Such HDD Bay has power HDD in such bay has Read Write activity Menu Navigation The system is essentially composed of various functions and settings that organized into a menu tree structure ease of operation User normally uses four primary navigation buttons on the Control Panel to navigate through the menu chart and select the desired function or setting Menu Option Scroll Up Menu Option Scroll Down Enter into the Menu Execute the Function Submit the Setting change Go back to the previous Menu Abort the current Function Cancel the Setting change Example Adjust the Buzzer setting in the Setup menu Step 1 Turn on the system by pressing the Power button After it has booted up the main menu screen will appear root menu that signifies the system is ready Step 2 Consecutively press the UP or DOWN arrow button until Setup appears Step 3 Press the ENT button once to enter into the Setup menu Step 4 Consecutively press the UP or DOWN arrow button until Buzzer appears Step 5 Press the ENT button once to
Download Pdf Manuals
Related Search