Home

Version 3.25 Addendum Manual

Contents

1. Changes the depth view of Power Log according to your needs The log can be viewed and printed in either Measured Depth Subsea Level or True Vertical Depth These views are dependant on whether you have survey data entered and if you have calculated or entered in the TVD fields in the Survey points window There are two ways to change your depth views but these views are only applicable to Power Log They are both outlined below Procedure 1 1 Click on Depth View located under the View pull down selection on the menu bar to activate the pop out menu and then click on the desired depth view MD Measured Depth TVD True Vertical Depth or SSL Sub Sea Level you want for the active Log This will change the logs screen presentation You will notice that the depth layer shows the depths with either an m or ft followed by ssl in subsea level view or tvd in true vertical depth view Depth View Mode Goa to Depth Log Scales Screen Scale Accuracy P Layers Organizer Show Active Layer Show All Layers e how Hide D igit Show Hide Header W Toolbar w Selection Bar w Status Bar Note The SSL and TVD views are calculated from the directional surveys entered into the wells data You must also have the KB elevation if you wish to view the log in the SSL view The user has the ability to setup which survey groups survey sets they wish to utilize for these views Procedure 2 Click on the down arrow on the Depth View mode
2. g9 PowerSuite Auto Backup V3 2 en Lopyright 2000 TrVision Geosystems Ltd Canada 403 777 9454 Interne www powerlagger com Addendum Manual V3 25 Page 55
3. The button activates the TVD calculations window which can calculate the Survey group calculate the Master Survey group update the well path and calculate all the TVD fields in the various report window Adding a Directional Survey Group 1 Click once on the New button or press ALT N and then fill in the report window with your data 2 When you have finished adding your data click on the Save button or press ALT S and then Exit out of the ensuing Shortcut Options window e Editing a Directional Survey Group 1 Click on the button to view a list of Directional Survey Groups to date and then double click on the record that you wish to edit Once the selected record is displayed in the Directional Survey window make any changes you feel are necessary 2 Or click twice on the Query button and then click on the Next Record button to view all of the records in the database See the Database Navigational Tools section later in this User Manual for more information 3 Click on the Save button or press ALT S and then Exit out of the ensuing Shortcut Options window e Deleting a Directional Survey Group 1 Click on the button to view a list of Directional Survey Groups to date and then double click on the record that you wish to delete Once the selected record is displayed in the Directional Survey window click on the Delete button 2 Or click twice on the Query button and then click on the Next Record butt
4. 1 339 5 339 5 339 3 33 3 316 7 42 75 338 5 331 02 343 13 354 12 363 66 371 72 378 99 383 95 388 01 390 38 391 02 391 47 391 67 46 79 51 18 55 38 333 340 1 341 2 62 6 340 8 66 41 34D 7 53 5 340 6 74 77 341 5 90 2 341 8 95 45 339 5 88 8 333 7 88 5 338 5 88 8 338 2 Cancel Addendum Manual V3 25 Page 22 POWER SUITE V 3 25 Addendum Manual 5 This will place survey points depth in the top depth field the Survey Group ID selected into the Survey Group ID field 6 Click on the Add button and the Survey will be place in the list Note This Survey and all subsequent surveys in this groups list will be added to the Master Survey Groups survey points until another Survey Group and its top depth has been added to the list How to Change a Survey Group top Survey Point 1 Click on the Master Survey Group button in the Directional Survey Window This will activate the Master Survey Group Window 2 Highlight or click on the survey point you wish to change 3 Click on the Select Survey Group button This will activate the Choose Directional Survey Window Choose Directional Survey Mar 3 2001 2 gyroscopic wireline Feb 27 2001 1 magnetic MWD Mar 3 2001 2 gyroscopic wireline Clear Freld Cancel 4 Click on the Directional Survey group you wish to Add and then click on the Select Button This wil
5. New button or press ALT N to prepare the window for the entry of a new record and a flashing cursor will be placed in the Well Name field 3 Type a well name into the Well Name field 4 Click on the UWI button to activate the UWI Format window 5 Select either DLS NTS or Name from the Use drop box field and then enter the UWI information into the appropriate fields 6 Click on the OK button and the UWI field in the Well window will automatically be filled in with the new UWI 7 Insert any other necessary information into the remaining Well window fields 8 Click on the Save button or press ALT S and the new well will be saved to the database Note The Well Name field should be highlighted after you have clicked on the Save button or press ALT S as an indication of a properly saved record Some of the fields in the Edit Well window have character restrictions or mandatory requirements Consequently if any of these restrictions have been violated or if any requirements have not been met the offending field will be highlighted and the problem will be displayed on the Status Bar at the lower left hand corner of your screen Remember to save your work again after the problem has been rectified 9 If the record has been successfully saved select Exit when prompted with the Shortcut Options system window Addendum Manual V3 25 Page 16 POWER SUITE V 3 25 Addendum Manual View Menu Selection Depth View Mode
6. Types from the Rock Type Favorites list window 4 Click once on the OK button to return to the System Options window 5 Click on the Save button in the System Options window when you are finished Acc Favorites Allows the user to determine their thirty 30 favorite Accessories and then displays them in a pop up menu or Toolbox generated by the activation of the Accessory Builder window in the Interpreted and Detailed Lithology tracks The Button when clicked allows the user to determine their thirty 30 favorite Accessories and then displays them in a pop up menu or Tool Box generated by the activation of the Accessory Builder window in the Interpreted and Detailed Lithology tracks How to Change the Accessory Favorites Selection 1 Click once on the Acc Favorites tton in the System Options window to activate the Accessory Favorites window shown on the net page Addendum Manual V3 25 Page 39 POWER SUITE V3 25 Addendum Manual Accessor Favorites Thinbed anhy prim breccia anhydrite primary breccia be anhy prim clasts anhydrite primary clasts S anhy prim nodules anhydrite primary nodules anhy prim pebbles anhydrite primary pebbles anhy prim stringers anhydrite primary stringers Component t agg grs aggregate grains alg lams Algae laminations alg nn desc Algae non descript alg oot Algae ootoid alg skel Algae skeletal Matrix METRI HIE E bent bentonite LA bits bituminou
7. Window 4 Select the From Tie In or Kick Off co ordinantes The defaults are picked up from the User defined TVD Calculation portion of the Directional Surveys Report found under the menu item Reports Kick Off is selected by default if not filled in Remember that the data required for the Kick Off or Tie In reference is entered in the Directional Surveys Report found under the menu item Reports Kick Off is selected by default Addendum Manual V3 25 Page 8 POWER SUITE V 3 25 Addendum Manual Calculate Master Survey Portion The User has the ability to have the program calculate the Directional Surveys in the Master Survey group which calculation method either minimum curvature or drift angle calculations and from either tie in or kick off co ordinates The Master Survey Group can be compiled from points from different Survey Groups The Master Survey group is built in the Directional Survey window If there is only one survey group this procedure is not required The Master Survey group if built is then used to perform all TVD SSL Calculations within the application Procedure 3 If the user wishes to calculate the Master Survey Group activate the Check box M in this portion of the window 4 Select the Calculation method from the drop box Minimum curvature must have an azimuth and will fill in all the fields in the Survey Points Window otherwise use drift angle to get only the TVD field
8. a Sample Core Description in the Table of Contents for more information Evaluation Type in the Formation Evaluation pertaining to the lithology etc You may use the short forms and then click on the Expand button to lengthen the descriptions Conclusion Type in the Formation Conclusion pertaining to hydrocarbon potential You may use the short forms and then click on the Expand button to lengthen the descriptions Field Restriction Table Group short 5 Character Optional Group 30 Character Optional Formation short 5 Character Optional Formation 30 Character Mandatory Member short 5 Character Optional Era 30 Character Optional Series 30 Character Optional Period 30 Character Optional Stage 30 Character Optional Age 7 3 Numeric Optional Boundary Type 30 Character Optional Fault Type 30 Character Optional MD Sample 5 2 Numeric Optional MD Log 5 2 Numeric Optional TVD Prognosis 5 2 Numeric Optional TVD Sample 5 2 Numeric Optional TVD Log 5 2 Numeric Optional Evaluation 2000 Character Optional Conclusion 2000 Character Optional Thickness 10 5 Numeric Optional Addendum Manual V3 25 Page 36 POWERSUITE V 3 25 Addendum Manual Note When you add any layer to a log it is always associated with a Data Type Every Data Type in Power Log Curve has a default setting The default settings for a Formation layer are shown below To access this window click on the Layer Configuration button on the Toolbar when the Form
9. completed in the Survey Points Window 5 Select the From Tie In or Kick Off co ordinates The defaults are picked up from the User defined TVD Calculation portion of the Directional Surveys Report window from the survey group that has the shallowest survey point Kick Off is selected by default if not filled in Remember that the data required for the Kick Off or Tie In reference is entered in the Directional Surveys Report found under the menu item Reports Kick Off is selected by default Well Path Portion The Well Path for lack of better terms will update any curve on your log with either TVD or SSL data and will start at any depth required It basically plots a curve with respect to measured depth and the survey data s TVD calculations which can also be converted to SSL if a KB elevation has been entered into the Well Record located under the Edit menu Procedure 1 If the user wishes to calculate or update the Well path curve activate the Check box M in this portion of the window 2 Select which curve you wish to populate with this data by clicking on the Well Path Curve Button and selecting the curve from the existing curve in the database 3 Type in the Start depth for which the curve will first appear on the log 4 Select which units you would like this curve to be plotted or updated with from the Units selection box TVD is the direct calculations from the survey points SSL are converted with respect
10. drive has to have 75 megabytes of free disk space in order for a backup to be performed Once the user has selected their specifications click on the OK button and those requirements will be followed Note The backup file names for the database backups are pgeology 001 pgeology 002 etc Addendum Manual V3 25 Page 53 POWER SUITE V3 25 Addendum Manual Window Menu New Window Use this command to start a new Auto Backup Log The user must select New Window located under the Windows selection on the main window to arrange multiple log history windows in a cascading manner Cascade Use this command to arrange multiple opened windows in a non overlapping top to bottom fashion The user must select Cascade located under the Windows selection on the main window to arrange multiple log history windows in a cascading manner Tile Use this command to arrange multiple opened windows in a non overlapping side by side fashion The user must select Tile located under the Windows selection on the main window to arrange multiple log history windows in a tiled manner Arrange Icons Use this command to arrange icons The user must select Arrange Icons located under the Windows selection on the main window to arrange your icons Addendum Manual V3 25 Page 54 POWERSSUITE V 3 25 Addendum Manual About Auto Backup The user must select About Auto Backup located under the Help selection on the main window to view the About window
11. hardware key the user must first place the Hasp parallel port key on the parallel port before the printer cable If you have a USB Hasp key this must be placed on the USB port If you have not installed the Hasp key driver on your computer you must insert the Power Suite CD ROM and run the executable HDD16 exe or HDD32 exe to enable the program to see the Hasp key Refer to page in your manual 1 To activate the License Selector click on the Start menu select programs select the Power Geology folder and click on the selection This will activate the Power Suite License Selector program shown below Power 5uite License Selector Options Current Configuration Current Directory c pqeology Floating License HO Remote Directory HO Protection Type HASP Hardware Key 2 Click on the Options selection to view the pull down menu Lrypkey HASP 3 Select HASP The Protection type should read HASP Hardware Key as viewed in the Power Suite License Selector window shown above Addendum Manual V3 25 Page 44 POWERSSUITE V 3 25 Addendum Manual Crypkey Software License Activation Local The Crypkey Authorization Local is the default License Activation when the program is first installed The program authorization must be done by TriVision Geosystems Ltd To activate a trial or permanent Local Crypkey license please call our office 403 777 9454 The user should refer to the License Configuration sect
12. horizontal section of the well F extended for 525m and reached a maximum depth of 1037m MD The well bore stayed in a fairly narrow window 380 2 to 383 8m TYD for most of the well The well bore dropped significantly when we were unable to steer ornent at a depth 960m MD when we were at an elevation of 383 8m TYD and dropped down to a maximum of 385 74m TYD at 1037m MD The upper limit of the hole was reached at a measured depth of 664m MD or 380 2m TYD where we encountered a significant The Main Tidsdale Sandstone was drilled horizontally for 525m and encountered at least a minimum of 290m of good oil pay zones These zones should and will produce oil at a significant rate The porosity overall is quite good and there was no indication of water during any of the drilling of the drain section of this well This is a zone of much importance and should be further evaluated on downhole logs Addendum Manual V3 25 Page 34 POWER SUITE V 3 25 Addendum Manual K B Ground and Casing This information is displayed based on the Well information that you entered in the Well window The Well window can be located under the Edit Menu Selection Formation List Button Click on this button to display the list of Formations and Sample Tops that have been entered to date Double click on the Formation or highlight the Formation and click on the Select button to edit or view the Formation When editing or adding a new Formation
13. is not being used on a continual basis How to Start the Auto Backup Module 1 Click on the Start button and then select programs Power Geology V3 25 and then select the Auto Backup LE PowerGeology 3 25 ja Auto Backup selection The User can also go into the Pgeology Folder and then double click on the Auto Backup Icon as shown below Auta Backup 2 This will activate the Database Login Window Type in the User ID and Password for the database you wish to back up and then click on the OK Button Database Login Information Connection Information Please enter the user name and password for the database you wish to backup User ID Password ped CS 3 This will then activate the Power Suite Auto Backup Window and Log Click on the setup Icon ti activate the Setup window shown on the next page Addendum Manual V3 25 Page 47 POWER SUITE V3 25 Addendum Manual Backup Directory pqeology PGBACKUP Humber of backup copies Backup Schedule Specify start time Backup Database every Select database type Change password Hin free disk space The Backup Directory defaults to the Pgbackup directory of the Pgeology directory on the drive that the Power Suite programs were loaded The user can click on the further button and direct the backup files to any directory they desire The Number of backup copies indicates how many copies of the pgeology db metric database file or the
14. ordinates The defaults are picked up from the User defined TVD Calculation portion of the Directional Surveys Report window from the survey group that has the shallowest survey point Kick Off is selected by default if not filled in Remember that the data required for the Kick Off or Tie In reference is entered in the Directional Surveys Report found under the menu item Reports Kick Off is selected by default Well Path Portion The Well Path for lack of better terms will update any curve on your log with either TVD or SSL data and will start at any depth required It basically plots a curve with respect to measured depth and the survey data s TVD calculations which can also be converted to SSL if a KB elevation has been entered into the Well Record located under the Edit menu Procedure 8 If the user wishes to calculate or update the Well path curve activate the Check box in this portion of the window 9 Select which curve you wish to populate with this data by clicking on the Well Path Curve Button and selecting the curve from the existing curve in the database 10 Typein the Start depth for which the curve will first appear on the log 11 Select which units you would like this curve to be plotted or updated with from the Units selection box TVD is the direct calculations from the survey points SSL are converted with respect to the wells Kelly Bushing Elevation TVD Attributes Portion Proc
15. remember to click on the Save button or press ALT S when you are finished Clicking on the button or pressing ALT N will clear the window allowing you to enter a new information Group Formation and Member names Only the Formation long name is a mandatory field The short name will be added to the formation layer display on the log coupled with the short period name and the measured depth Formation Layer Long Name format Short Name format 3 Lambert Evaporite Key TVD 295 4 SSL 270 50 Sequence Number The Seq field can be used to override the order that the formations are printed out in the well end and morning reports Era Series Period and Stage Use the drop box methods to access the various Eras on the lists Note that the Period chosen will affect the list in the Stage drop box Age You may enter the estimated geological age of this formation in this field Thickness You may enter the thickness of this formation into this field or the user can Click on the button if you wish the program to calculate the Measured Depth thickness between this formation and the next formation in the list Note When the Thickness field is filled in with the measured depth thickness of the formation you Will be able to generate a sample description report with formation tops that will contain all your sample descriptions Tops Depth section You may enter the Measured Depths and True Vertical Depths in thes
16. the Layer Configuration button on the Toolbar when the layer is active Notice that this Directional Survey is directed at Reference ID 1 and its associated Survey Points Layer Configuration Save Undo New Del First Prev nex Last Name Data Type Sequence Foreground Color Background Color Remarks P p ee Ei Uw Annotation Group Dir Survey Det Lith Group Grid Definitions Depth Axis Grid D ata Axis Grid T Linear Cycles style Type Cycles Major Minor Increment Style Porosity or Grain Size Scale Lett _ ight units _ Lurve Definitions Display Controls Curve Curves Format Depth Offset Width I Scale changes on non active layers Pattern Data Axis Grid v Layer Style Depth Axis Grid Color Header Scale Addendum Manual V3 25 Page 32 POWER SUITE V 3 25 Addendum Manual Reports Enter the details of any Formation into this window The information entered into this window can be used to produce three 3 separate reports the well end Formation Evaluation report the well end Formation Tops report and the Morning Report Formation report These reports can be printed using the Print Well End Report and the Print Morning Report windows Note In order to have the Formation Evaluation report printed there are two fields that must be filled in Boundary Type and Period If these fields are left blank the Formation Evaluation Rep
17. to the wells Kelly Bushing Elevation TVD Attributes Portion Procedure 6 If the user wishes to calculate or update the specified TVD fields within the various windows throughout the Reports activate the Check box M in this portion of the window The program is only able to determine the T VD at any depth covered by the directional surveys Power Log and Power Curve have several windows in which the measured depth and corresponding true vertical depth are asked for If you have directional surveys over that Addendum Manual V3 25 Page 9 POWER SUITE V3 25 Addendum Manual interval the program will calculate the exact TVD for you If it is outside the range of your surveys it will be left as a manual entry 7 Select or click on which fields highlight you wish to calculate for or recalculate if you have changed the survey data Remember you have the ability to select all or unselect all 8 Click on the Button Addendum Manual V3 25 Page 10 POWER SUITE V 3 25 Addendum Manual Print Log Prints all or part of your log well 1 Under the File menu click on Print Log or click on the Print button on the Toolbar to activate the Print Log window shown below Note The Title bar and all depths associated with the Print Log window are defaulted to the Depth View that Power Log or Power Curve are in at the time of the activation of the Print Log window Print View Hode MD Printer Acrobat Distiller on C Pr
18. Change the Lithology Sort Order Rock Type List Dol Anhy prim _ Clyst cold ies Clyst gy Tr Tr rr ee Mild TT TT TT EE Hic Sh m gy ws a 5 4 Cht dk A Cht It 1 Click on the Options Selection on the Application menu bar and select Systems Options This will activate the System Options window 2 Click on the 9e Lithology Sort Order button This will activate the Lithology Sort Order Window shown above 3 Select the Rock Type the user wishes to move by clicking on the rock type once This will highlight the rock type 4 Click on the Move button The Move button will then transform into a Move Start button Addendum Manual V3 25 Page 42 POWER SUITE V 3 25 Addendum Manual 5 Then Select the Rock Type you wish to move the previously selected type above by clicking on the new rock type The previously selected rock type will now be placed above or to the left of the rock type you just clicked on 6 If you wish to change the order of more rock types proceed with steps 3 5 7 If you are pleased with the newly rearranged 96 Lithology Rock order click on the Save Button This will close the 96 Lithology Sort Order Window and put the user back into the oystems Options window More 3 Button When the More Button is activated the user will look at the lesser used functions of the systems Options which are only relevant to the Template Entry method of inputting sample descriptions Templat
19. Cut Amount Recovered and Percentage A value must be entered into the Core Scale field in order to printout anything 13 If you wish to printout Formation Tops activate the Formation Tops check box M and the Formation Tops will be included on a separate page at the end of the log printout e Page Margin The page margin field is available primarily wnen you are printing to Adobe Acrobat writer When a numerical value in inches is typed into this field it will initiate a top and left margin for the templates Title Page Legend and Formation Tops as well as a left margin for the main log e Page Overlap Activate the Page Overlap check box lvI if you are printing on single sheets This will force the printer to include an additional 1 4 inch of the log at the top and bottom of each page so that you can cut and paste pages manually if you so desire e Print Methods e Default Activating the Default radio button forces Power Log Curve to use a raster or bitmap graphic printing method which was used exclusively in Power Log Curve from V1 92 and earlier e Pixel Matching Activate the Pixel Matching radio button if you are using an HP PaintJet Continuous printer The user must install the HP PaintJet Continuous printer driver found on Installation Disk 1 on your diskettes e Meta File Activating the Meta File radio button forces Power Log Curve to use the meta file technology printing method This printing method was d
20. HO Remote Directory WAS TER publicipgeology Protection Type CrypKey 2 Click on the Options selection to view the pull down menu LmypKey HASP Remote UNC Network Path Mapped Metowrk Drive 3 Select Crypkey to activate a pop out menu 4 Select Remote to activate another pop out menu 5 Select either the UNC Network Path or the Mapped Network Drive selection to direct the Power Suite applications to the location of the licensing files The Protection type should read Crypkey as viewed in the Power Suite License Selector window as well as the path to the remote directory where the license files are located as shown above a UNC Network Path will activate a window in which the user should type in the path to the Crypkey License files as shown below and then click on the OK button UNC Network Path Please enter UNC Network Path i Xmasterkpublickpgeology b Mapped Network Drive will open a window in which the user will select the drive and directory in which the Crypkey License files reside and then Click on the OK button Addendum Manual V3 25 Page 46 POWERSSUITE V 3 25 Addendum Manual Automated Backup Module Overview The Auto Backup module allows the user to have their database backuped while the database is connected to This will prove useful when the database is being used and updated on a continual basis and the normal backup procedure when the database is being connected to
21. ITE Version 3 25 Addendum Manual WY GEOSYSTEMS LTD The Intelligent Geological Software Solution Suite 314 602 11 Avenue S W Calgary Alberta T2R 1J8 Phone 403 777 9454 Fax 403 777 9455 Website www powerlogger com Email info powerlogger com POWER SUITE V3 25 Addendum Manual OverView TVD SSL Module We have created a new TVD SSL module to add to the Power Log application TVD and SSL views can be activated from the View menu and from a drop box on toolbar If the well contains directional surveys the TVD and SSL view of the log can be shown A Master survey set is build from the default survey group or is user defined to include multiple survey sets We have also changed the interface for calculating directional survey group calculating the master survey group updating the well path and correcting the other TVD fields in the reporting application The TVD SSL views are now based on the Master Survey group A definition of the Master Survey Group is a compilation of multiple survey groups to define the well from spud to total depth Power Suite has enabled the user to enter multiple set of surveys from different measuring devises The user can then take points from all the sets to build a Master Set of survey points that best defines the well path This group is then compiled and then used to represent Power Log in the TVD SSL depth views This survey set is also used to calculate or interpolate TVD values for a
22. ack of the log Printer Font Scaler Used to scale the default printer s font size up or down so that the font size on printouts matches the font size displayed on the screen le If the font size on the printout is bigger than the font you see on the screen the user must reduce this number and vice versa if the font size on the printout is smaller than the font you see on the screen the user must increase the value of this number Transparent When activated this function makes the background of the accessory symbols transparent so that the bed in the background shows through If deactivated a white background surrounds the accessory symbols in order to separate them more from the beds Frequency 9 1 240 Determines how often symbols are shown on a Lithology Layer while at the scale of 1 240 For example 1 symbol every 1 meter at 1 240 2 symbols every 1 meter at 1 120 1 symbol every 2 meters at 1 480 and so on These frequencies are only in effect if you utilize the entire interval in Oil Shows Rounding Sorting Framework and Diagenesis Grain Size Scale List box You may choose your system default Grain Size Scale from either the Wentworth Canstrat or Amstrat scales when using the Grain Size Builder Grain Size Verbal Scale Radio Button This radio button will display the Grain Size Track header with the equivalent verbal grain sizes such as such as C SLT VF F M C Grain Size mm Scale Radio Button This radio button wil
23. all the TVD and SSL views for a specific well This would only be applicable if there are multiple survey groups for a well and they cover different portions of the wells profile Addendum Manual V3 25 Page 7 POWER SUITE V3 25 Addendum Manual T D Calculation Uw ABC Oil 12 25 Directional Surrey Calculate Directional Survey _ Calculate Master Survey Group Calculation Method From Well Path Calculate Well Path Well Path Curves Well Path ssl Start Depth Units SSL Calculate TYD Attributes T D Attributes Bg fur M EI EN RES Formation 5ample Top TVD Well Test Base T D well Test Top TYD Well Test Total TYD Directional Survey Portion The User has the ability to have the program calculate the Directional Survey group select which survey group they wish to calculate which calculation method either minimum curvature or drift angle calculations and from either tie in or kick off co ordinates Procedure 1 If the user wishes to calculate a Survey Group activate the Check box M in this portion of the window 2 Ifthe default survey group is not correct Click on the Survey Group button and select the survey group you wish to calculate from the List 3 Select the Calculation method from the drop box Minimum curvature must have an azimuth and will fill in all the fields in the Survey Points Window otherwise use drift angle to get only the TVD field completed in the Survey Points
24. aracter Optional Survey Mode 20 Character Optional Survey Date DATE FORMAT Optional Default Current Date Calculation Method 20 Character Optional Kick off MD 10 5 Numeric Required for calculations Kick off TVD 10 5 Numeric Required for calculations Kick off Inclination 10 5 Numeric Required for calculations Kick off Azimuth 10 5 Numeric Required for calculations Kick off East meters 10 5 Numeric Required for calculations Kick off North meters 10 5 Numeric Required for calculations Kick off Section meters 10 5 Numeric Required for calculations Kick off Dog Leg 10 5 Numeric Required for calculations Kick off Latitude 5 7 Numeric Optional Kick off Longitude 5 7 Numeric Optional Kick off N S 100 Character Optional Kick off E W 100 Character Optional Tie in MD 10 5 Numeric Required for calculations Tie in TVD 10 5 Numeric Required for calculations Tie in Inclination 10 5 Numeric Required for calculations Tie in Azimuth 10 5 Numeric Required for calculations Tie in East meters 10 5 Numeric Required for calculations Tie in North meters 10 5 Numeric Required for calculations Tie in Section meters 10 5 Numeric Required for calculations Tie in Dog Leg 10 5 Numeric Required for calculations Tie in Latitude 5 7 Numeric Optional Tie in Longitude of Numeric Optional Tie in N S 100 Character Optional Tie in E W 100 Character Optional Dog Leg Characteristic 4 0 Numeric Required for calculations Target Azimuth 5 2 Numeric Required for calculations Rema
25. ation layer is active Layer Configuration Save Undo New Del First Prev Next Last Name Data Type Sequence Foreground Color Background Color Remarks O beck ante JF Uwi Annotation Group Dir Survey Det Lith Group Grid Definitions Depth Axis Grid D ata Axis Grid Linear Cycles Log b al Style Type Cycles Major Minor Increment Porosity or Grain Size Scale Lett ight __ units Display Controls Format 2 Depth Offset W Scale changes on non active layers P ata Axis Grid Layer Depth Axis Grid Curve Definitions L urve fs Curves Width Pattern Style Color Header Scale Format 1 Long Names Format 2 Short Names E Addendum Manual V3 25 Page 37 POWER SUITE V3 25 Addendum Manual Options Menu Selection The user can manage the Power Log Curve system settings with this window System Options General Home Directory c pgeology Rock Favorites Version Data Buffer Date Format Compatibility Lookahead Monitor Height Monitor Width m inches 3 79 inches Font Size Lithology Desc Annotation Depth Printer Font Scaler ka Symbology Grain Size Frequency 1 240 1 symbol every m Verbal Display mm Display C Interpreted Lithology Layer Directional 4 Lithology Sort Order Show Bedding Contacts 4 Survey display e System Options Home Directory This is the directory on your har
26. bar This will activate the Directional Survey Import window Directional Survey Import Choose Delimiter Choose Start Depth 6135 0000 122 3000 29 5000 125 0000 162 0000 2442 0000 0 6540 0 0000 0 5550 0 0000 0 16 6140 0000 121 1000 33 0000 125 0000 163 0000 2455 0000 0 6430 0 0000 0 5530 0 0000 0 6145 0000 117 3000 30 7000 125 0000 165 0000 2458 0000 0 7210 0 0000 0 5470 0 0000 D 6150 0000 113 4000 33 8000 126 0000 163 0000 2477 0000 0 7000 0 0000 0 5250 0 0000 0 Once the correct delimiter is selected the data should fill separate curves starting with the first Then from the drop down lists choose which curves are for Measured Depth Inclination and Azimuth Select Data Columns Column 1 Column 2 Column 3 Column 4 Column 5 6150 0001 153 0000 6155 000 6160 000 6165 000 6170 000 6175 0001 6180 000 2455 0001 2458 0001 2477 000 Calculate TYD Ch File 1 The first thing you must do is click the JEFES provided by the directional drillers button and select the data file Addendum Manual V3 25 Page 6 POWER SUITE V 3 25 Addendum Manual 2 The next step is to select which Survey Group you want to Import the surveys into The Default is Group 1 If you wish to Import the surveys into a different group click on the Survey Group button and then select the Survey Group form the List provided 3 The next step is to select the correct delimiter for your file Select one from the right
27. calculate the Master Survey Group activate the Check box M in this portion of the window 8 Select the Calculation method from the drop box Minimum curvature must have an azimuth and will fill in all the fields in the Survey Points Window otherwise use drift angle to get only the TVD field completed in the Survey Points Window 9 Select the From Tie In or Kick Off co ordinates The defaults are picked up from the User defined TVD Calculation portion of the Directional Surveys Report window from the survey group that has the shallowest survey point Kick Off is selected by default if not filled in Remember that the data required for the Kick Off or Tie In reference is entered in the Directional Surveys Report found under the menu item Reports Kick Off is selected by default Well Path Portion The Well Path for lack of better terms will update any curve on your log with either TVD or SSL data and will start at any depth required It basically plots a curve with respect to measured depth and the survey data s TVD calculations which can also be converted to SSL if a KB elevation has been entered into the Well Record located under the Edit menu Procedure 10 If the user wishes to calculate or update the Well path curve activate the Check box Mi in this portion of the window 11 Select which curve you wish to populate with this data by clicking on the Well Path Curve Button and selecting the curve from t
28. ckup are performed at what time the backup occurs and even how much hard disk space is left in order to perform a backup There are two ways to activate the setup window One is to select setup from under the Options pull down menu or the user can click on the Setup Icon on the toolbar This will activate the Setup window shown below Backup Directory c pgeology PGBACKUP Humber of backup copies Backup Schedule Specify start time Backup Database every Select database type Change password Hin free disk space The Backup Directory defaults to the Pgbackup directory of the Pgeology directory on the drive that the Power Suite programs were loaded The user can click on the further button and direct the backup files to any directory they desire The Number of backup copies indicates how many copies of the pgeology db metric database file or the pgeology dbi imperial database file the user would like to save before these files get overwritten with newer files Backup Schedule portion of this window indicates when the first backup is performed and how often after that the backup occurs In the example above the first backup occurs at 12 00 Midnight and happens once a day Select database type to backup allows the user to select either the Metric or the Imperial database Min free disk space allows the user to specify what the minimum hard disk space requirements are to perform a backup In this case the hard
29. d be useful if utilizing continuous paper when you want the title page oriented on the correct side of the prefolded paper 17 When you are ready to print your log click on the Print button Note When you exit from the Print Log window you will be asked if you wish to save the print settings If you click on Yes the program will remember every setting that you made to the Print Log window and then will default to those settings the next time you enter the Print Log window Addendum Manual V3 25 Page 14 POWER SUITE V 3 25 Addendum Manual Edit Menu Selection Lets you add new wells edit existing wells and delete a well The majority of this information is usually filled in at the start of a well but should be updated with new information at the completion of a well The information associated with each well is entered into the Well window along with the well s UWI Unique Well Identifier Note that each well and the information that it contains must be associated with a UWI Unique Well Identifier in order to distinguish it from the other wells residing within the Power Log Curve database However the only way in which a well s information can then be displayed is by associating it with a log and then having that log open e Starting a New Well without Starting a New Log Note Starting a new well without starting a new log is only useful if you are utilizing the Correlational Module to display the data from multi
30. d drive where Power Log Curve is being executed Rock Favorites Allows the user to determine their ten 10 favorite Rock Types and then displays them in a pop up menu or Toolbox generated by the activation of the Rock Type Builder window in the Interpreted and Detailed Lithology tracks The button when clicked allows the user to determine their ten 10 favorite Rock Types and then displays them in a pop up menu or Tool Box generated by the activation of the Rock Type Builder window in the Interpreted and Detailed Lithology tracks How to Change the Rock Favorites Selection 1 Click once on the button in the System Options window to activate the Rock Type Favorites window shown on the next page Addendum Manual V3 25 Page 38 POWER SUITE V 3 25 Addendum Manual Rock Type Favorites Favorte List Selected Anhy prim Anhydrite primary Anhy sec Anhydrite secondary zur Bent Bentonite Brec Breccia Cal dk cht Conglomerate dark chert Cgil It cht Conglomerate light chert Cgil mixed Conglomerate mixed s Cgi vcol cht Conglomerate varicolored chert 4 Cht dk Chert dark Cht foss Chert fossiliferous Cht It Chert light pg Cht tripic Chert Enpolitic Cht col Chert varicolored Clyst cold Claystone colored 2 Then click once on the Clear All button in the Rock Type Favorites list window to prepare it for the selection of your Rock Favorites 3 Now select some of your more commonly used Rock
31. e database file and puts it into the dbbackup directory in the Pgeology directory System Options Window We have added some new functionality s to the System Options window The user now has the ability to turn off or turn on the bedding contact lines and accessories in the interpretive lithology track layer Addendum Manual V3 25 Page 3 POWER SUITE V3 25 Addendum Manual Table of Contents Addendum Manual V3 25 Page 4 POWER SUITE V 3 25 Addendum Manual File Menu Selection Connects Power Log Curve to a database To access the Connect Database window click on Connect under File or click on the Connect button on the Toolbar Connect Database Databases agenology 3 2 Imperial Watcom SOL 4 0 eclogy 3 2 Metric f atcom SQL 4 0 User ID Paecloay Password Cancel Quick Dictionary Load Backup Database Change Password e Connecting to a Database 1 When this window is displayed highlight the PAEOLOGY V3 2 Metric Watcom SQL 4 0 database 2 Enter your User ID and Password in their respective fields your default User ID and Passwords are both pgeology 3 Click on the Connect button to complete the connection e Quick Dictionary Load The dictionaries must be loaded from the database the very first time After the dictionaries have been loaded for the first time they will be stored as a few files in Power Log s root directory in addition to being available in the database There
32. e Entry Method Hore Symbology Description Format Wholebed Visibility EA 9 Scientific OVerbal Standard Symbol Width 0 1 mm v Verbal Percent Numeric Percent Standard Symbol Height 0 1 mm Display Sub intervyals Template Entry Method This option allows you to utilize the template features of Power Log Curve to enter Lithology Descriptions instead of the default method of data entry Wholebed Visibility Determines how much of a bed to display when a Lithology track is populated with symbols Symbol Size Does not change the actual size of the symbols Instead the figures in these fields determine how much space surrounds the symbols When the spaces around the symbols are larger fewer symbols can be placed on a track Addendum Manual V3 25 Page 43 POWER SUITE V3 25 Addendum Manual License Selector Program The License Selector program can be accessed through the Power Geology folder and facilitates the selection between the two different licensing methods available for the Power Suite applications The two types of authorizations that can be implemented to run our applications are e Hasp Key hardware license that sits on either the parallel port or USB port of your computer Otherwise known as a dongle or hardware key e Crypkey software license that can either reside locally on your computers hard drive or can reside on a network drive Hasp Hardware Key License Activation To activate a Hasp
33. e fields If you have entered survey point data and have filled in or calculated the TVD fields and you have a survey point above and below the depth of this formation the True Vertical depths will be calculated for the user Note Formations are normally ordered by their depths starting with Log Tops TVD then MD followed by Sample Top TVD then MD and lastly by Prognosed Tops TVD in all the well end and morning reports where the tops are generated Subsea This is calculated from the depths entered in the Tops section and the K B elevation that you entered in the Well window Addendum Manual V3 25 Page 35 POWER SUITE V3 25 Addendum Manual Alignment This is used to align the Formation Top in a Formation layer using Format 2 in the Layer Configuration window The following choices are available from this drop box Left Middle Right and Blank Leave this box blank if you don t want the Formation Top to be shown on the layer but still want the Formation Top to be printed out via the Well End Report window If you are using the Formation layer in more than one track you should beware of layer overlapping You will discover which is the best alignment for all layers You have one selection for all layers using this format Samples Button Click on this button to activate the Sample Core Description Transfer window from which you may copy Sample Core Descriptions into either the Evaluation and or Conclusion fields See Copying
34. e picked up from the User defined TVD Calculation portion of the Directional Surveys Report found under the menu item Reports Kick Off is selected by default if not filled in Remember that the data required for the Kick Off or Tie In reference is entered in the Directional Surveys Report found under the menu item Reports Kick Off is selected by default Addendum Manual V3 25 Page 30 POWER SUITE V 3 25 Addendum Manual Calculate Master Survey Portion The User has the ability to have the program calculate the Directional Surveys in the Master Survey group which calculation method either minimum curvature or drift angle calculations and from either tie in or kick off co ordinates The Master Survey Group can be compiled from points from different Survey Groups The Master Survey group is built in the Directional Survey window If there is only one survey group this procedure is not required The Master Survey group if built is then used to perform all TVD SSL Calculations within the application Procedure 5 If the user wishes to calculate the Master Survey Group activate the Check box M in this portion of the window 6 Select the Calculation method from the drop box Minimum curvature must have an azimuth and will fill in all the fields in the Survey Points Window otherwise use drift angle to get only the TVD field completed in the Survey Points Window 7 Select the From Tie In or Kick Off co
35. e the application then creates a Master Survey group that contains all the survey points from all the groups and there surveys points and then uses these to create the TVD and SSL presentations The Tie In or Kick of the shallowest survey points Survey group is used as a starting or reference point Master Survey Group ABC Oil 12 25 Top Depth Survey Group 145 50 990 00 Top Depth Select Survey Group Addendum Manual V3 25 Page 21 POWER SUITE V3 25 Addendum Manual How to Add a Survey Group 1 Click on the Master Survey Group button in the Directional Survey Window This will activate the Master Survey Group Window 2 Click on the Select Survey Group button This will activate the Choose Directional Survey Window Choose Directional Survey Mar 3 2001 2 gyroscopic wireline Feb 27 2001 1 magnetic HwD Mar 3 2001 2 gyroscopic wireline Clear Field Cancel 3 Click on the Directional Survey group you wish to Add and then click on the Select Button This will activate the Choose Survey Point Window 4 Click on the Survey point you wish to start with and then click on the Select Button Choose Survey Start Point HD TVD Drift Angle Azimuth 10 10 0 0 145 5 145 5 0 06 255 1 21 8 324 3 Clear Field 182 44 201 1 217 83 235 48 253 97 273 58 285 57 302 21 38 46 6 78 341 8 12 08 16 657 20 827 25 24 29 34 34 08 341 3 344 4 342
36. e user they must select Undo located under the Edit selection on the main Auto Import Window This will undo the last cut or paste that was done in the log history Cut This selection allows the user cut out a portion of the Auto Import Log history 1 The user must first highlight by clicking and dragging with the mouse a portion or all of the history The highlighted portion of the log history will be cut if step two 2 is done 2 To cut out or erase the highlighted portion of the log history the user must select Cut located under the Edit selection on the main Auto Import Window The highlighted portion of the log will be cut and saved to the clipboard Copy This selection allows the user copy a portion or all of the Auto Import Log history 1 The user must first highlight by clicking and dragging with the mouse a portion or all of the history The highlighted portion of the log history will be copied if step two 2 is done 2 To copy the highlighted portion of the log history the user must select Copy located under the Edit selection on the main Auto Import Window The highlighted portion of the log will be copied and saved to the clipboard Paste This selection allows the user to paste a previously cut or copied portion of the Auto Import Log history into the existing history log 1 The user must place the mouse where they wish to paste the copied or cut log history The previously copied or cut log history will be pasted
37. edure 12 Ifthe user wishes to calculate or update the specified TVD fields within the various windows throughout the Reports activate the Check box M in this portion of the window The program is only able to determine the T VD at any depth covered by the directional surveys Power Log and Power Curve have several windows in which the measured depth and corresponding true vertical depth are asked for If you have directional surveys over that Addendum Manual V3 25 Page 31 POWER SUITE V3 25 Addendum Manual interval the program will calculate the exact TVD for you If it is outside the range of your surveys it will be left as a manual entry 13 Select or click on which fields highlight you wish to calculate for or recalculate if you have changed the survey data Remember you have the ability to select all or unselect all 14 Click on the Button Directional Survey Points Window Field Restriction Table Measured Depth 5 2 Numeric Mandatory Drift Angle 4 6 Numeric Optional Azimuth 4 6 Numeric Optional TVD Depth 5 2 Numeric Optional N S Distance 13 2 Numeric Optional E W Distance 13 2 Numeric Optional Vertical Section 13 2 Numeric Optional Dog Leg Severity 4 2 Numeric Optional Note When you add any layer to a log it is always associated with a Data Type Every Data Type in Power Log Curve has a default setting The default settings for a Directional Survey layer are shown below To access this window click on
38. er defined TVD Calculation Calculation Method Calculate From Latitude Longitude Hole was drilled to perfection with respect to the original well plans Casing point was within 5 cm The horizontal 0 12148 10 0577 portion drain of the well reached 525m and was terminated Gurf Coordinat lative to bound due to hole conditions We could have gone further but the uote cueste em T ET hole was tight N75 245 45 meters North of the South boundary of Sec 2 Ew 2 45 meters East of the West boundary of Sec 25 4 Indicates fields that are required for Minimum Curvature and TVD calculations Addendum Manual V3 25 Page 19 POWER SUITE V3 25 Addendum Manual The Survey Points can be added through the button or directly through the Directional Survey layer Toolbox Note The Survey Group number is used to identify which group of survey points is associated with a specific Directional Survey layer on a log Each Directional Survey layer can be associated with a specific group of survey points This is done through the Directional Survey Layer Configuration window and selecting the group through its Directional Survey button The button allows the user to build or compile the survey points from multiple or specitic survey groups other than the default group 1 The User Defined TVD Calculation portion of the window allows the user to define the default calculation method when the survey groups survey points are calculated
39. eveloped for the newer models of printers on the market today as well as using the Adobe Acrobat Writer or pdf printing technology e Color Options e Auto Activating the Auto radio button forces Power Log Curve to use the settings from the printer driver to printout the log e Color Activating the Color radio button forces Power Log Curve to override the printer driver settings and consequently Power Log Curve assumes that you are using a color printer e Mono Activating the Mono radio button forces Power Log Curve to override the printer driver settings and consequently Power Log Curve assumes that you are using a monochrome black and white printer 14 Click on the Setup button to activate the Print Setup window and confirm that the correct printer settings are in effect Addendum Manual V3 25 Page 13 POWER SUITE V3 25 Addendum Manual Note If you are printing out logs in color you must activate the Diffusion or Error Diffusion option normally found under Graphics in the Properties window for most printers 15 Interval per page field indicates how many meters of log will fit on a page of selected paper size and orientation selected in the setup as well as what log scale you are printing at This will help indicate to the user how many pages will be required by the print job 16 Activate the Blank first page with a check box W1 if the user wishes to have a blank page before the logs starts This coul
40. fore each successive time you connect to a database you can activate the Quick Dictionary Load check box M to refer to the quick load files instead of retrieving the dictionaries from the database This is approximately four 4 times faster than retrieving from the database Be aware that if you make any changes to a geological expansion dictionary they will not be reflected upon connection unless you have retrieved the dictionary from the database at least once since the changes Each time the dictionary is retrieved from the database the quick load files will be updated e Backup Database The backup database utility creates a copy of the database to the pgbackup directory in the pgeology directory when the database is being connected Two copies of the database are saved in this directory and are subsequently overwritten every time you connect to the database The file names are pgeology qm1 and qm2 for quick metric 1 and 2 These files can be used if the database fails for any reason Simply replace the pgeology db files in the pgeology directory with these files which would have to be renamed before being copies to the pgeology directory Addendum Manual V3 25 Page 5 POWERSUITE V3 25 Addendum Manual Import Surveys Importing Surveys To access the Directional Survey Import window click on Import Export under File to activate the pop out menu and then select Import Surveys or click on the Import Survey button on the Tool
41. hand drop down box When you have selected the correct delimiter for your file the curves should fill the individual columns 4 From the top window choose a start depth by clicking the first line of data you wish to import 5 Select the columns that represent the measured depth Inclination and azimuth values from the drop down boxes on the right hand side of the columns 6 Click on IMPORT Button 7 Click on the Yes Buiton only if you have the required fields filled in within the Directional Survey Report window Otherwise you will not be able to calculate the surveys TVD Calculations The TVD Calculations window will perform either Minimum Curvature calculations if the survey data has an azimuth or direction or can do Drift Angle calculations if the survey data only has a measured depth and an angle for both the Survey group imported into as well as the Master Survey group This Master Survey group can consists of survey data from several groups of survey data that have been used throughout the drilling process The Master Survey group must be chosen in the Directional Survey window Also this window we can update a Well path curve from the survey points in either TVD or SSL values starting at a desired measured depth Also if you would like to change or update any of the TVD fields scattered through the different report windows can also be done in this window lf a Master Survey group is built this survey data is utilized to perform
42. he existing curve in the database 12 Type in the Start depth for which the curve will first appear on the log 13 Select which units you would like this curve to be plotted or updated with from the Units selection box TVD is the direct calculations from the survey points SSL are converted with respect to the wells Kelly Bushing Elevation TVD Attributes Portion Procedure 14 Ifthe user wishes to calculate or update the specified TVD fields within the various windows throughout the Reports activate the Check box M in this portion of the window The program is only able to determine the T VD at any depth covered by the directional surveys Power Log and Power Curve have several windows in which the measured depth and corresponding true vertical depth are asked for If you have directional surveys over that Addendum Manual V3 25 Page 26 POWER SUITE interval the program will calculate the exact TVD for you If it is outside the range of your surveys it will be left as a manual entry 15 Select or click on which fields highlight you wish to calculate for or recalculate if you have changed the survey data Remember you have the ability to select all or unselect all 16 Click on the Button V 3 25 Addendum Manual Field Restriction Table Survey Group 30 Character Mandatory service Company 30 Character Optional Directional Driller 50 Character Optional MWD Hands 50 Character Optional Survey Type 20 Ch
43. hen Exit out of the ensuing Shortcut Options window Addendum Manual V3 25 Page 33 N POWERX SUITE V3 25 Addendum Manual Deleting a Formation Top Click on the Formation button to view a list of Formations to date and then double click on the record that you wish to delete Once the selected record is displayed in the Formation window click on the Delete button Or click twice on the Query button and then click on the Next Record button to view all of the records in the database Select the record you wish to delete and it will be N displayed in the Formation window Then click on the Delete button See the Database Navigational Tools section later in this User Manual for more information The Undo button will restore the window to the settings of the last saved record You can Tab between fields or press Shift Tab to move backwards between fields This is the Well Formation window Well Formation Save Undo New Det First Last Ground Casing Flange Alignment pen ei eee telum Ss prr 12188 seme E ene H Group Carbondale Boundary Type conf conformable Member Main Tidsdale Sand Seqit Subsea r Tops Series SS 364 40 40 TYD iz 3f0 eH EH Sample 383 3 Age million years Thickness Calculate Thickness The Main Tidzdale Sandstone was encountered fairly close to the prognosed depth at 358 11m TYD Intermediate casing was set at 512m HD or 381 05m TYD The
44. if step two 2 is done 2 The user must select Paste located under the Edit selection on the main Auto Import Window The previously cut or copied portion of the Auto Import log history that was saved to the clipboard will be pasted into the log Addendum Manual V3 25 Page 50 POWERSSUITE V 3 25 Addendum Manual View Menu Tool Bar This selection allows the user to turn on or off the Tool bar on the Auto Import Window 1 The user must select Toolbar located under the View selection on the main window This will either turn off or on the Toolbar depending on its status at the time of activation Activate Setup Stop Backup H t T Start Backup Manual Backup Status Bar This selection allows the user to turn on or off the Status bar on the Auto Import Window 1 The user must select Status located under the View selection on the main window This will either turn off or on the Status bar depending on its status at the time of activation Addendum Manual V3 25 Page 51 POWER SUITE V3 25 Addendum Manual Backup Menu Start This selection allows the user to activate or start the Backup Database Module and follows the directions last saved in the Setup window 1 The user must select Start located under the Backup selection on the main window or they can click on the Start Icon 1 on the toolbar This will activate or start the Backup procedure according to the rules provided in the Setup window This will also pr
45. int a date and time stamp and the comment Start in the Log History BACKUP 2001 01 17 14 16 57 Performed Last File Saved C PGEOLOGY PGBACKUP PGBACKUP pgeology 01 Stop This selection allows the user to deactivate or stop the Backup Database Module from backing up the pgeology database into the designated backup directory 1 The user must select Stop located under the Backup selection on the main window or they can click on the Stop Icon on the toolbar This will deactivate or stop the Import Module from detecting any new files in the Import files directory The user will also notice a date and time stamp and the comment Stop in the Log History BACKUP 2001 01 17 14 20 05 Stop Manual This selection allows the user to activate a Manual Backup of the Database file at the present time 2 The user must select Manual located under the Backup selection on the main window or they can click on the Manual Icon on the toolbar This will activate or start a manual backup of the database The user will also notice a date and time stamp and the comment Manual Backup in the Log History BACKUP 2001 01 17 13 36 54 Manual Backup BACKUP 2001 01 17 13 36 58 Performed Last File Saved C PGEOLOGY PGBACKUP pgeology 002 Addendum Manual V3 25 Page 52 POWERSSUITE V 3 25 Addendum Manual Setup The setup window for the DBBackup module is where the user has control over where the database files are saved the frequency or how often the ba
46. ion in the manual to generate a site code 1 To activate the License Selector click on the Start menu select programs select the Power Geology folder and click on the selection This will activate the Power Suite License Selector program shown below PowerSuite License Selector Options Current Configuration Current Directory c pgeology Floating License HO Remote Directory HO Protection Type CrypKey 2 Click on the Options selection to view the pull down menu Lmpkey Local Asp 3 Select Crypkey to activate a pop out menu 4 Select Local from the pop out menu The Protection type should read Crypkey as viewed in the Power Suite License Selector window shown above Crypkey Software License Activation Remote The Crypkey Authorization Remote licensing has to be done by TriVision Geosystems Ltd on a Network Server To activate a trial or permanent Remote Crypkey license please call our office 403 777 9454 The user should refer to the License Configuration section in the manual to generate a site code 1 To activate the License Selector click on the Start menu select programs select the Power Geology folder and click on the selection This will activate the Power Suite License Selector program shown below Addendum Manual V3 25 Page 45 POWER SUITE V3 25 Addendum Manual PowerSuite License Selector Options Current Configuration Current Directory c pgeology Floating License
47. ion is utilized to build a True Vertical Depth and Subsea Level Depth view log presentations in Power Log The tie in and kick off information is critical to these calculations as well as the Target Azimuth and the Dog Leg Severity characteristics Also the choosing of which survey group groups you wish to use to do these calculations with in the Master Survey Group The information entered into this window can be used to produce three 4 separate reports as well as the TVD and SSL depth view Power Log presentations The Directional Surveys report uses both the Groups information and its survey points The Directional Survey Points report and the Deviation Survey Points uses the survey points only with two pieces of information Survey Type amp Mode out of the group data entry window The User can also print out the Master Survey Groups Survey points There is two ways to activate the Directional Survey window Select Directional Survey located under the Report pull down menu or click on the Directional Survey button located on the toolbar Directional Survey EE ee WWD A h i MD TVD Inclination Azimuth x Sanico Compani Directional Driller Dwight Francis Francois Turcotte z E W N7 5 jection Dog Leg HWD Hands Survey Latitude Longitude Sutface Coordinates relative to boundary Dog Leg Severity i Calculation Method Characteristic Target Azimuth Ew 26 8 meters East of the West boundary of Sec 25 4 NEN Us
48. l activate the Choose Survey Point Window Addendum Manual V3 25 Page 23 POWER SUITE V3 25 Addendum Manual 5 Click on the new Survey point you wish to start with and then click on the Select Button Choose Survey Start Point HOD TVD Drift Angle Azimuth 145 5 145 5 0 06 255 1 10 10 0 0 145 5 145 5 0 06 255 1 164 163 99 1 87 324 3 5 182 44 6 78 341 8 201 17 12 08 21 7 83 15 55 Cancel Clear Field 235 48 253 97 273 58 20 82 25 24 29 34 286 57 34 08 302 21 38 45 l 315 7 42 75 338 5 331 02 46 797 333 343 13 51 18 340 1 354 12 55 38 341 2 363 66 B2 8 340 8 371 72 66 41 340 7 378 99 69 6 340 5 383 95 74 77 341 5 388 01 80 27 341 8 390 38 85 45 339 6 391 02 88 8 339 7 3591 47 88 5 338 6 3591 67 88 8 338 2 6 This will place survey points depth in the top depth field the Survey Group ID selected into the Survey Group ID field 7 Click on the Change button and the new Survey point will be place in the list How to Delete a Survey Group 1 Click on the Master Survey Group button in the Directional Survey Window This will activate the Master Survey Group Window 2 Highlight or Click on the Survey points Start depth and Group ID you wish to Delete and then click on the Delete Button This will delete the survey point and Groups ID from the list How to Calculate the Master Su
49. l display the Grain Size Track header with the equivalent numeric grain sizes in mm such as 0625 125 25 5 1 2 etc Interpretive Lithology Layer Show Bedding Contacts This check box M when activated will turn on the bedding contacts lines between the drawn lithology types in the Interpretive Addendum Manual V3 25 Page 41 POWER SUITE V3 25 Addendum Manual Lithology Layer When the check box is deactivated unchecked it will turn off the bedding contacts lines between the drawn lithology types in the Interpretive Lithology Layer Interpretive Lithology Layer Show Accessories This check box M when activated will turn on the accessories in the Interpretive Lithology Layer When the check box is deactivated unchecked it will turn off the accessories in the Interpretive Lithology Layer Directional Survey Display This option will display your directional surveys on your log in either Quadrant format N 62 W or Azimuth format AZ 298 2 Lithology Sort Ord Lithology Sort Order Button This button activates a window that does the ordering of the Lithology layer The rock types listed in this window is the sort order from left to right in Power Log and top to bottom in Power Curve when the Lithology Track Layer is utilized The sort order can be changed by the user at any time but will only take effect after the application has been reactivated The Lithology Sort Order Window is shown below How to
50. ll measured depth fields If the user only has one survey set and has kept the group name as 1 then the Master Survey group does not have to be assembled There is no ability for the user to edit any data on the striplog in TVD SSL view modes We have given the user the ability to transfer Sample descriptions to the striplog in the TVD SSL views We have added a second depth to the mousebox fields to represent both the Measured Depth and the depth of the current view Either TVD SSL view License Selector Module We have added another utility to replace the old batch file method to select which License you would like to use The License selector application enables the user to switch from Crypkey Software License authorization and the Hasp Hardware License authorization Also allows the user to set up a remote license where the software license is residing on another box on a network Automated Backup Module We have added the Auto Backup module allows the user to have their database backuped while the database is connected to This will prove useful when the database is being used and updated on a continual basis and the normal backup procedure when the database is being connected to is not being used on a continual basis Upgraded Crypkey Software We have upgraded our Software protection utility to CrypKey5 5 which will allow us to use the new Windows ME and 2000 opertaing systems Print Log Window We have added the Log width to the pri
51. more information 3 Click on the Save button or press ALT S and then Exit out of the ensuing Shortcut Options window e Deleting a Directional Sur Te Point 1 Click on the Measured Depth button to view a list of Directional Survey Points to date and then double click on the record that you wish to delete Once the selected record is displayed in the Directional Survey Point window click on the Delete button 2 Or click twice on the Query button and then click on the Next Record button to view all of the records in the database Select the record you wish to delete and it will be displayed in the Directional Survey Point window Then click on the Delete button See the Database Navigational Tools section later in this User Manual for more information The Undo Undo button will restore the window to the settings of the last saved record You can Tab between fields or press Shift Tab to move backwards between fields e Indicating a Misrun To indicate a Misrun enter in the measured depth MD of the survey and simply check the MISRUN check box to flag this survey as a misrun Misruns will be excluded from any calculations performed on the surveys and will be labeled in the appropriate End of Well reports Addendum Manual V3 25 Page 29 POWER SUITE V3 25 Addendum Manual Calculating Directional Survey Points To perform the minimum curvature calculations on your directional surveys click on the Calculate TVD butto
52. n in the Directional Survey Points window This will activate the TVD Calculations window T D Calculation Uw ABC Oi 12 25 Directional Survey Calculate Directional Survey _ T Calculation Method From Calculate Master Survey Group Calculation Method From Well Path Calculate Well Path Well Path Curves Well Path ssl Start Depth Units 55L Calculate TVD Attributes TYD Attributes Bai M IG MEUM UE Formation Sample Top TVD Select an Well Test Base TYD Well Test Top TYD Well Test Total T D Unselect All ufall Mellor Total TUT Directional Survey Portion The User has the ability to have the program calculate any Directional Survey group select which survey group they wish to calculate which calculation method either minimum curvature or drift angle calculations and from either tie in or kick off co ordinates Procedure 1 If the user wishes to calculate a Survey Group activate the Check box M in this portion of the window 2 If the default survey group is not correct Click on the Survey Group button and select the survey group you wish to calculate from the List 3 Select the Calculation method from the drop box Minimum curvature must have an azimuth and will fill in all the fields in the Survey Points Window otherwise use drift angle to get only the TVD field completed in the Survey Points Window 4 Select the From Tie In or Kick Off co ordinantes The defaults ar
53. nt log window to allow the user to better identify which size paper they should be printing the log to We have also modified this window to be able to print the log in 3 different view modes The title bar on the Print Log window now identifies to the user which view mode they are in MD Measured Depth TVD True Vertical Depth SSL oubsea Level Depending on which view the user is in when they activate the print log window the corresponding depth in the print log window will be modified to the view they are presently in Slide Rotate Layer Track Addendum Manual V3 25 Page 2 POWER SUITE V 3 25 Addendum Manual We have added the S symbol to the slides in the Slide Rotate track LAS Import Module We have further enhanced our LAS Import Module to be able to handle more types of LAS files and variations to the true LAS file headers Formation Tops Window We have added a Formation Thickness calculation button to the Well Formation Report window It will now find the next deeper formation and calculate the measured depth thickness between those two records Well Window We have added a County and Permit fields to the Well record in the Imperial Version of the program and also redesigned the window to make the flow of data input easier Connect Database Window We have added a Backup database checkbox to the connect database window to automatically backup the database when the user connects to the database and makes a copy of th
54. nt s will not be displayed on the survey layer but they will still be printed out through the Print Well End Report window Note The information that is shown on the Directional Survey layer is a line that is always placed on the right side of the track at the Measured Depth Drift Angle Azimuth and TVD The rest of the information goes to the Print Well End Report 4 Click on the Save button or press ALT S and then respond to the ensuing Shortcut Options window 5 After the record has been saved the user can then select the LS 7 button to perform either Drift Angle or Minimum Curvature calculations from either the tie in or kick off points Note he drift angle calculations uses minimum curvature but we assume an azimuth for all the survey points so we can do some T VD calculation s to produce interpolated T VD s as well as produce a TVD SSL log e Editing a Directional Survey Point Addendum Manual V3 25 Page 28 POWER SUITE V 3 25 Addendum Manual 1 Click on the Measured Depth button to view a list of Directional Survey Points to date and then double click on the record that you wish to edit Once the selected record is displayed in the Directional Survey Point window make any changes you feel are necessary 2 Or click twice on the Query button and then click on the Next Record button to view all of the records in the database See the Database Navigational Tools section later in this User Manual for
55. ogram Filesk amp amp dobeXAcrobat 4 0XPDF Output pdf P P Page Margin Title F fL dil Page Faye eee et letter landscape C Page Overlap BHO Prnt Methods M Title Page MLogo t Detout Title Page Hemarks 7 Pixel Matching Pd amp MetaFile Color Options C Legend C Auto L e Color Header Core Accessories 5 cale O Mono User defined Interval Today Section 750 00 to 980 OU Interval per Page Well Section 125 00 to 975 00 7 UE i y Section 128 00 to 58 00 Log Width User defined Interval to 10 46 Cores Scale 120 Ie Header 768 00 785 00 1 C Formation Tops Print Quality 144 dpi Blank First Page Printer Setup 2 Select the appropriate paper orientation from the Page Orientation drop box field and the Title Page Legend and Formation Tops will automatically conform to the selected orientation There are four 4 types of paper orientation to choose from letter portrait or letter landscape and legal portrait or legal landscape settings Note The letter or legal landscape or portrait settings selected from within the Print Log window will NOT override the paper orientation settings selected in the printer s Properties window Therefore you must also modify the paper orientation settings in your printer s Properties window to letter or legal landscape Addendum Manual V3 25 Page 11 POWER SUITE V3 25 Addendum Manual Moreover when printing in letter o
56. on interval is derived from the From and To Depth values entered into the Today s Section portion of the Power Log Data Transfer Export window The Well Section interval is derived from the Top and Base Depth values entered into the Print Sections window See Print Sections The Lithology Section interval is derived from what has been drawn into the interpretive lithology track of the well that is being printed 10 If user defined interval is chosen the user can select which depth type either measured depth true vertical depth or subsea level depth from the depth measurement drop box The user must also type in the depth interval to be printed Note The log itself must be displayed in whatever depth view you wish to print before you activate the print log window To change the log to the desired format refer to depth view under the view pull down menu Addendum Manual V3 25 Page 12 POWER SUITE V 3 25 Addendum Manual In the Cores portion of the Print Log Window 11 If you are printing out a Core log select the Cores you wish to print by highlighting them 12 Select or type in the Scale for the core log to be printed out at in the Scale drop box field and then activate the Header check box M to have the track headers printed out with the core log Note A separate Header Information Box is automatically printed out with every Core and includes the Core Scale Core Date Core Number Cored Interval Amount
57. on to view all of the records in the database Select the record you wish to delete and it will be Addendum Manual V3 25 Page 20 POWER SUITE V 3 25 Addendum Manual displayed in the Abandonment Plug window Then click on the Delete button See the Database Navigational Tools section later in this User Manual for more information The Undo button will restore the window to the settings of the last saved record You can Tab between fields or press Shift Tab to move backwards between fields Master Survey Group Definition The user can imagine the master survey group as a compilation of multiple survey groups to define the well from spud to total depth Power Suite has enabled the user to enter multiple set of surveys from different measuring devises The user can then take points from all the sets to build a Master Set of survey points that best defines the well path This group is then compiled and then used to represent Power Log in the TVD SSL depth views This survey set is also used to calculate or interpolate T VD values for all measured depth fields If the user only has one survey set and has kept the group name as 1 then the Master Survey group does not have to be assembled How to Compile the Master Survey Group The user must identify which Survey Groups they want used for the TVD SSL depth views of Power Log The user must identify which group s of surveys and the starting survey point in that survey group Once this is don
58. ort for that Formation will not be printed The Formation Tops information can also be viewed on the log using the formation layer in either Format 1 or 2 depending on your application Formation Tops are automatically generated in the Morning Report from the Formation Tops that are entered into the Well Formation window The depths entered into the Morning Report window are used to generate the Morning Formation Top report list However before a list can be generated two 2 reports must be filled in to initiate a range If your Sample Tops are located between these two 2 depths the Formation Tops will then come out in the Morning Report e Adding a Formation Top 1 Click once on the New button or press ALT N and then fill in the report window with your data 2 When you have finished adding your data click on the Save button or press ALT S and then Exit out of the ensuing Shortcut Options window e Editing a Formation Top 1 Click on the Formation button to view a list of Formations to date and then double click on the record that you wish to edit Once the selected record is displayed in the Formation window make any changes you feel are necessary 2 Or click twice on the Query button and then click on the Next Record button to view all of the records in the database See the Database Navigational Tools section later in this User Manual for more information 3 Click on the Save button or press ALT S and t
59. pgeology dbi imperial database file the user would like to save before these files get overwritten with newer files Backup Schedule portion of this window indicates when the first backup is performed and how often after that the backup occurs In the example above the first backup occurs at 12 00 Midnight and happens once a day Select database type to backup allows the user to select either the Metric or the Imperial database Min free disk space allows the user to specify what the minimum hard disk space requirements are to perform a backup In this case the hard drive has to have 75 megabytes of free disk space in order for a backup to be performed 4 Once the user has selected their specifications click on the OK button and those requirements will be followed 5 Click on the Start Button on the toolbar or Click on Start selection under the Backup pull down menu This will activate a confirmation window indicating what was specified in the Setup window Addendum Manual V3 25 Page 48 POWERSSUITE V 3 25 Addendum Manual Shrink Log History This selection allows the user to view a portion of the last page of the Autoimp log file so that any new action can be seen To activate this select Shrink Log History located under the File selection on the main Auto Import Window This will then truncate the file so that the last action is always in the middle of the log window Print This selection allows the user to print the Au
60. ple wells for offset information within the same log 1 Click on Well under Edit to activate the Well window shown below x undo New det Fist rev wen test saeun Metic E origina unies Location 12 23 45 12 W4M Well Mame ears ABC Oil Resources Ltd Licenze dt 1230323 Operator BC Oil Resources Ltd Pool Lamba C Pool Field Anywhere Drilling Contractor Total Deepmess 35 Elevations County Reference Ground Alberta Province State Casing Flange 21 08 Country Canada Coordinates Latitude lanaitude N 5 324 23 meters North of the South boundary f Sec 23 45 12 Ww Gurface lU 12148 10 0577 Erw J10 12 meters East of the West boundary Of Sec 23 45 12 W4 Bottom Hole 0 12151 10 0578 710 5 meters North of original Surface Location 62 04 meters West of original Surface Location Hole Direction lFaulted Deviated Depths Date Time Work Schedule Drillers T D Drillers T D Drillers T D Drillers T D Loggers T D Loggers T D S pud Feb 25 2001 22 15 T ally HD urves Tally TVD Strap MD Strap TYD HD T D KB to Ground Cut Fill Plugback Sidetrack Rig Release Mar 10 2001 12 00 ts fan fas Well Status Cased Potential Sephton Gaz Well Water Depth Reference Water Depth Addendum Manual V3 25 Page 15 POWER SUITE V3 25 Addendum Manual Note This diagram has been filled in to give you an idea of how to complete the different fields 2 Click on the
61. r legal landscape you may wish to modify the Transmission Retry value in the printer s Properties window from the default of 45 seconds to 200 seconds 3 Activate the Title Page check box II if you wish to printout a Title Page 4 Activate the Logo check box M if you wish to printout a logo and then select a logo from the Logo drop box field Note Any bitmap image may be printed out as a logo However the bitmap image must be an equally sided square image because Power Log will shrink or expand the image to fit the logo space on the Title Page This bitmap should be placed in the pgeologyMogo directory 5 Type any pertinent comments into the Title Page Remarks field and they will be displayed accordingly on the Title Page 6 Activate the Legend check box M if you wish to have a striplog legend printed out In the Log portion of the Print Log window 7 Select or type in the Scale for the main log to be printed out at in the Scale drop box field and then activate the Header check box M1 to have the track headers printed out with the main log 8 Activate the Core Accessories check box M to have the core accessories printed out on the main log 9 Highlight the main log printing options in the selection box The user can select either None User defined Interval requires that you manually enter the desired print interval depths Today Section Well Section or Lithology Section Note Today Secti
62. rks 254 Character Optional Addendum Manual V3 25 Page 27 POWER SUITE V3 25 Addendum Manual Directional Survey Point This window is accessed through the Directional Survey Report window the Well window or through the Directional Survey layer Toolbox These points can be viewed on the log through a Directional Survey layer or can be printed from the Print Well End Report window Directional Surveys can be imported from ASCII files supplied by Directional Drillers Directional Survey Point First Prev Next Last Dritt Angle Azimuth T D meg 5 pe Dp Misrun H 5 Distance E w Distance Vertical Section Dog Leg Seventy Alignment Use the Database Navigational Tools to scroll through the existing records or click on the Measured Depth button to view a list of the survey points that already exist within the database Adding a New Record Click on the New button or press ALT N Enter any appropriate information into the empty fields M Note If you have information for the Measured Depth Drift Angle and Azimuth fields the rest of the fields can be calculated for you See Chapter Five Options Menu Directional Survey Import Overview Select an Alignment if you want to view the Directional Survey Point s on the track that contains the survey layer The default Alignment is always right However if you select a blank Alignment from the Alignment field drop box your Directional Survey Poi
63. rvey Group Survey Points If the Master Survey group has been altered in any way and the user exits the window they will be prompted with a calculation window The user will have to recalculate the master survey group for your changes to take affect 1 Click on the Master Survey Group button in the Directional Survey Window This will activate the Master Survey Group Window 2 Click on the Calculate TVD Button This will activate the TVD Calculations window Addendum Manual V3 25 Page 24 POWER SUITE V 3 25 Addendum Manual T D Calculation Uw ABC Oil 12 25 Directional Surrey Calculate Directional Survey _ Calculate Master Survey Group Calculation Method From Well Path Calculate Well Path Well Path Curves Well Path ssl Start Depth Units SSL Calculate TYD Attributes T D Attributes Bg fur M EI EN RES Formation 5ample Top TVD Well Test Base T D well Test Top TYD Well Test Total TYD Directional Survey Portion The User has the ability to have the program calculate any Directional Survey group select which survey group they wish to calculate which calculation method either minimum curvature or drift angle calculations and from either tie in or kick off co ordinates Procedure 3 If the user wishes to calculate a Survey Group activate the Check box M in this portion of the window 4 If the default survey group is not correct Click on the Survey Group button and
64. s t chlor chlorite cly clay Cement anhy anhydrite amp bar barite W bits bituminous calcs calcareous w cht dk chert dark 2 Then click once on the Clear All button in the Accessory Favorites list window to prepare it for the selection of your Accessory Favorites 3 Now select some of your more commonly used Accessories from the Accessory Favorites list window 4 Click once on the OK button to return to the System Options window 5 Click on the Save button in the System Options window when you are finished Date Format From this drop down box you can select the date format This selection determines how every date in Power Log Curve will be entered and displayed If you import a log with different date formats Power Log Curve will change the dates to comply with the format you ve chosen here Version Compatibility Enables the user to achieve compatibility between Annotations in the Version 1 81 Lithology Text layer and Annotations in the Version 1 90 and later Versions Lithology Text layer Data Buffer Lookahead The number placed in this field determines how far ahead and behind the current top depth will be stored in the computers buffer The larger the lookahead number the longer it takes for Power Log Curve to refresh the screen when you exceed the lookahead value However until you meet or exceed the lookahead value scrolling will be much faster because the database is not yet being acce
65. select the survey group you wish to calculate from the List 5 Select the Calculation method from the drop box Minimum curvature must have an azimuth and will fill in all the fields in the Survey Points Window otherwise use drift angle to get only the TVD field completed in the Survey Points Window 6 Select the From Tie In or Kick Off co ordinantes The defaults are picked up from the User defined TVD Calculation portion of the Directional Surveys Report found under the menu item Reports Kick Off is selected by default if not filled in Remember that the data required for the Kick Off or Tie In reference is entered in the Directional Surveys Report found under the menu item Reports Kick Off is selected by default Addendum Manual V3 25 Page 25 POWER SUITE V3 25 Addendum Manual Calculate Master Survey Portion The User has the ability to have the program calculate the Directional Surveys in the Master Survey group which calculation method either minimum curvature or drift angle calculations and from either tie in or kick off co ordinates The Master Survey Group can be compiled from points from different Survey Groups The Master Survey group is built in the Directional Survey window If there is only one survey group this procedure is not required The Master Survey group if built is then used to perform all TVD SSL Calculations within the application Procedure 7 If the user wishes to
66. selection on the Selection Bar and select the desired depth view for your Log Addendum Manual V3 25 Page 17 POWER SUITE V3 25 Addendum Manual View Menu Turns the Toolbar on and off e The New Power Log Curve Toolbar Connect to Print Curve Sample Core Database Morning Report Maintenance Description Directional New Transfer Log Import Calculate Survey Data L Exp T About i ort C j Disconnect Frint Log Layer re Conf tion urveys tn Log Dos dep cium Configuration A alabast Track Open p Si Configuration sensitive Lo E P He lp View Selection Bar Turns the Selection Bar on and off e The New Power Log Curve Selection Bar Depth View Mode Show Hide Header Active Layer Selection List Show All Log Layer Layers scales Ofset LAS Toolbox d 7 SIR o Aso SL es Se TM A ow Hide Digits al Ta Organizer Shey Depth Active acreen Layer Accuracy Note Disabled buttons are a gray color like the Show Hide Digits button displayed on the previous page Likewise when buttons are in use they are indented like the Show Hide Header button displayed on the previous page Addendum Manual V3 25 Page 18 POWER SUITE V 3 25 Addendum Manual Report Menu Selection Directional Surve Information regarding Directional Surveys is entered into this window This information can then be printed out in the Print Well End Report window Also this informat
67. ssed Addendum Manual V3 25 Page 40 POWER SUITE V 3 25 Addendum Manual Monitor Height This option allows you to scale your monitor for Power Log so you may correlate on screen wells with hard copy logs that you may have It is recommended that you take an opportunity to measure the vertical viewing area of your monitor in inches and then insert that value in the Monitor Height field Be aware however that if you adjust the screen height knob on your monitor this will affect the monitor height setting Monitor Width This option allows you to scale your monitor for Power Curve so you may correlate on screen wells with hard copy logs that you may have It is recommended that you take an opportunity to measure the horizontal viewing area of your monitor in inches and then insert that value in the Monitor Width field Be aware however that if you adjust the screen width knob on your monitor this will affect the monitor width setting Font Size Lithology Desc Annotation Allows you to pre determine the font size on your log when you use the Sample Description Transfer window It is also the default font size when you enter any Annotation Layer Toolbox If you change this option it will only be reflected upon the Annotation that you transfer or add to the system from that point on Any previous transfers are not affected Font Size Depth This allows you to select the font size of the depth markers in the Measured Depth tr
68. to Import log history to the default printer To activate this select Print located under the File selection on the main Auto Import Window This will then print the Auto Import Log Print Preview This selection allows the user to print to a preview window the Auto Import log history The user can then select print View Next page View Previous page View One page View Two pages Zoom Out Zoom In and Close from the toolbar on the top of this window To activate this select Print Preview located under the File selection on the main Auto Import Window This will then print to preview the Auto Import Log Print Setup This selection allows the user to print to activate the Printer Setup window to select the desired printer and define the page setup etc To activate this select Print Setup located under the File selection on the main Auto Import Window This will then activate the Print Setup window which handles the Printer and the page paper orientation etc Exit This selection allows the user to close down or exit the Auto Import Module To activate this select Exit located under the File selection on the main Auto Import Window This will then close down the Auto Import Module Addendum Manual V3 25 Page 49 POWER SUITE V3 25 Addendum Manual Undo This selection allows the user to undo anything that has been cut or pasted within the Auto Import Log history 1 To undo anything that has been cut out or pasted by th

Download Pdf Manuals

Related Search

Related Contents

Operating Instructions Bedienungsanleitung Mode d  Guia do Usuário  user manual  PDF - Garage Subaru Suisse  Les Primeurs sont à la fête !  Philips PI2010B1 4GB Black      00053178 / N900 Dual-Band WLAN-USB-Stick, 2,4/5 GHz  

Copyright © All rights reserved. Failed to retrieve file