Instruction Manual
Contents
1. Water Supply Bowl Plate 1 EN Nm Main unit upper body 1 Package Contents Number in indicates the quantity Main unit lower body 1 The parts shown in the box on the right are preinstalled in the Water Supply Bowl before shipping Water Supply Bowl AC adapter 1 fal Instruction manual 1 Enzyme Prefilter 1 iy ML um 7 ul ws HAT lm ul cl Humidifying Filter holder 1 Humidifying Filter _ Silver ion cartridge 1 Before Use 4 Be sure to remove Water Supply The filters and silver ion cartridge Instruction manual the protective cushion Bowl Plate are fitted together in the factory Including warranty card from inside the unit before shipping before use Protective cushion Styrofoam E Control Ring Ga x x 2 a AC d t Water Supply Bowl Si OL m Protective cushion Styrofoam Removing from the Package Main unit Main unit lower body y upper body Remove from the packaging as shown in the illustration above We recommend storing the packaging such as the cushion material and box for future storage or transportation of the unit 5 Before Use Water supply inlet Display Air outlet a Control Ring we Switch gt 24h Timer button Names of Parts an Power button n Speaker Air a W Adapter plug connect2. Is the AC adapter plug connected to the unit correctly Insert the AC adapter plug securely into the unit Is the Child Lock set Release the Child Lock Has the error detection function and safety function activated Check the unit according to Error Detection Function and Safety Functions on P 29 of this manual Has the circuit breaker in the house tripped Check the house circuit breakers Does the Water Supply Bowl contain any water The unit cannot operate when the Water Supply Bowl is empty Fill with water from a kettle etc Has the Water Supply Bowl been filled with water over the full line The unit cannot operate when the Water Supply Bowl is filled with water over the full line Take out the Water Supply Bowl and remove water until the water is below the full line Are the Water Supply Bowl and Water Supply Bowl Plate set correctly Set the Water Supply Bowl and Water SupplyBowl Plate correctly Is the Humidifying Filter locked securely Lock the Humidifying Filter firmly with the Humidifying Filter Holder Symptom Check Points Solution Page Power does not switch Is there a gap between the upper body and gt The unit cannot operate when the upper lt on lower body of the main unit body and lower body of the main unit are not set correctly as the contact points are not aligned Rotate the
3. The brightness of the indicators and Ger teeinst the OEL display Zur ck can be adjusted Einst zur cks Resets the settings to the factory default The output indicators flash in white and the air volume switches to O when the Settings screen is entered 21 How to Use Lautst rke The volume of operating sounds can be adjusted Firmware Informationen Information on the firmware of this unit can be set Various settings can be configured as desired such as making the indicators dimmer or lowering the volume of operating sounds Various settings can be configured for the main unit as desired Akt Uhrzeit The current time can be set Returns to the previous screen Details on main unit settings Display brightness Adjust the brightness of the indicators and the OEL display if they are too bright or are too dim to see properly The brightness can be selected from three levels High Medium and Low The factory default is Medium Operating Sound Current Time The volume of operating sounds can be adjusted The volume can be selected from three levels High Medium and Low The factory default is Medium This unit is equipped with a clock function The time needs to be set in order to use the 24h Timer If the current time is not correct set it again in Einstellungen gt Gerateeinst gt Akt Uhrzeit Reset Settings Reset all settings you have configur
4. If the unit falls or topples do not continue to use Remove the AC adapter from the wall outlet and request inspection Contact the BALMUDA Europe Service Center P 45 to request inspection 35 For Safety Display 13 How to Use OEL display The OEL display shows detailed operating information so that it can be viewed at a glance Display dimming The display will become bright only while the unit is being operated If the unit is not operated for more than 1 minute the indicators on the main unit automatically switch to low brightness They are only displayed brightly while the unit is being operated Air volume water volume indicator During normal operation this indicates the air volume The five air volume levels are indicated in green This switches automatically to a water volume indicator when filling with water While the unit is When the unit is not being operated being operated dim Mode icon The current Operating Mode is indicated by icons Humidity setting The current humidity setting is displayed Child Lock icon 24h Timer icon Displayed when the 24h Timer is set Current humidity The current humidity is displayed This may differ slightly from the actual humidity depending on the conditions of the room where the unit is being used Air volume indicator This indicates the current air volume The volume is displayed from O no airoutp
5. or your dealer for out of warranty repairs You can request for a repair with charge if it enables the product to function properly 4 Never attempt to repair or modify the product by yourself Handling of Personal Information 1 BALMUDA Inc hereinafter BALMUDA may use personal information for customer service and repairs and may keep a record of the inquiries 2 BALMUDA will not disclose personal information to third parties except in the following cases a When repairs or confirmation of repairs are entrusted to third parties b In cases pursuant to the provisions of laws and regulations 3 For inquiries on personal information please contact the BALMUDA Europe Service Center P 45 Correct Disposal of this Product This marking indicates that this product should not be disposed with other household wastes throughout the EU To prevent possible harm to the environment or human health from uncontrolled waste disposal recycle it responsibly to promote the sustainable reuse of material resources To return your used device please use the return and collection systems or contact the retailer where the product was purchased They can take this product for environmental safe recycling If Problems Occur 40 FAQ Symptom Check Points Solution Power does not switch on 41 If Problems Occur Is the AC adapter inserted into the wall outlet correctly Insert the AC adapter securely into the wall outlet
6. upper body to the correct positionand align the contact points Air volume has changed Is the unit operating in Auto mode gt When operating in Auto mode the air volume even though didn t is automatically adjusted to keep the humidity touch the controls in the room at the set humidity Air is not emitted from Has the 24h Timer operated When the 24h Timer is active air output is the unit even though the stopped during the time period for when power IS ON STOP is selected in the 24h Timer setting Check the status on the OEL display Is the humidity setting set to a low value in Rotate the Control Ring in the direction auto mode operation to increase the humidity setting is Setting selected in the menu gt Air output is temporarily stopped when Setting is selected The unit will return to its previous mode once setting is completed Is the unit being filled with water at the particular moment Air output is temporarily stopped while the unit is being filled with water The unit will return to its previous mode once the water is supplied The humidity displayed on this unit is different to the humidity of the room Is the hygrometer placed far away from this unit Factors such as the installation location of the unit height of the unit and presence of an air conditioner cause differences in the humidity display Use the current humidity display a
7. BALMUDA Rain Instruction Manual ERN 1000SD Series Important Thank you for purchasing Rain Before using this product please be sure to read this manual and the Safety Precautions P 34 to 38 thoroughly Furthermore please be sure to follow the instructions adhered with the mark on each page This manual also serves as a warranty card Be sure to store in a safe place after reading Contents 3 Contents Before Use Package COMTES Seat eeenetusy 4 Removing from the Package 5 Names of Parts ee ae ee a ee ee ee ee S 6 Assembly ie 6 OS nee Se ES 7 Installation ee ee a er ER 1 1 How to Use How to operate Hr rer 12 Display Hr mmseeeeeeen nennen nenn 13 Operating Modes and 24h Timer 15 Filing with Water re see 16 Operalmng ine Un wessen LZ Current Time ccc c tte 19 ZA Witmer Sengo wre 20 Settings Unit Settings 21 Maintenance erste 23 Storage aa e CeCe CLES eee Cee ee ee 75 Cleaning the Humidifying Filter 26 Replacing the Filter 2 Error Detection Function and Safety Functions Error Detection Function and Safety Functions oe Troubleshooting Sri AC adapter nk aba Be ee For Safety Safety Precautions Warnings Oey OW We WW ew ee el ee we Cautions bole ete See Sw ee BW een ee Specifications eee If Problems Occur Warranty and After Service Handling of Customer Personal Information Correct Disposal of this Product 40 Control Ring 1
8. Bowl in Move it to the bathroom a vacuum cleaner the position shown and lift it out etc for washing 6 Wash the silver ion cartridge Wash the Water Supply Bowl 8 he ries aa tad remains LE Continued on next page How to Use 24 9 Assemble See P 7 P 10 for assembly instructions J Set the silver ion Set the Water cartridge Humidifying Supply Bowl Filter and Humidifying Filter Holder A Je Contact u Point mn ly Ny Set the Enzyme Wipe away the water Set the Control Insert the AC adapter Prefilter from the contact points Ring into a wall outlet before setting the main unit upper body Reset the filter cleaning sign aN Filter Reinigungssymb Vv Select and click Filter Reinigungssymb in the menu selection screen Symbol rucks Filter Reinigungssymb zur ckgesetzt Wartung regel m ig durchf Ausf hren Abbrechen v Click to proceed to Click Ausf hren the next screen This completes resetting How to store Storage If you will not use the unit for a long time clean it according to the instructions in Maintenance and thoroughly dry the parts that have been washed After this store the unit in a place with minimal dirt or dust Avoid areas with high temperatures high humidity or direct sunlight 25 How to Use Cleaning with citric acid or baking soda It is recommended to clean the Humidifying Filter by soa
9. ater does water may overflow from the Water Supply Bowl and wet the floor Ot enter the surrounding air outlet Operation stops when the remaining water is low in any Operating Mode Fill with water and resume operation Use fresh plain tap water Using old water may result in bacteria e gt breeding inside the unit h Do not use mineral water alkaline ionized water well water or water purified by a water purifier This may result in bacteria breeding inside the unit Make sure that the AC adapter is connected to the wall outlet when filling with water to ensure that the water volume in the Water Supply Bowl is detected Be careful not to spill water on the outside or around the unit when filling with water Doing so may result in water getting into the air intake causing the unit to malfunction How to Use 16 d ON OFF O vr ag Rain Designed by BALMUDA Turning the power on a ET W on or off using the Control Ring QPB Operating the Unit Setting the volume humidity Entering the menu screen Rotate the Control Ring to set the volume or humidity For detailed operations such as changing the modes setting the 24h Set the air volume in Manual Mode Timer and configuring settings click the front of the Control Ring to Set the humidity in Auto mode o H i gt enter the menu selection screen Air volume Humidity settings Increase Air volume Humidity settings Decrease Pr
10. ed for 24h Timer Einstellung Ger teeinst and Einstellen der Luftfeuchtigkeit im automatischen Modus to the factory default How to Use 22 Maintenance A50 Filter L Filter OLTAN Filter Cleaning Sign The filter cleaning sign is displayed after around two weeks of use Be sure to clean the filter when this is displayed Continuing to use the unit without cleaning it may cause scale to form and become too hard to remove or cause mold or bacteria to breed Clean the filter regularly to prevent odors and a decrease in the humidifying Capacity Remove the AC adapter from the wall outlet first 23 How to Use Be sure to place with the display Disassemble the main unit _ facing upward Placing the unit upside down may cause water to enter the display and damage the unit Remove the Control Remove the main Place it on a towel Ring unit upper body etc so that the floor does not get wet Remove the Humidifying Filter Rinse the Humidifying Filter Holder under running water I Lift and remove it ji WW Rotate the filter I holder to unlock ay Take care not to deform the filter Remove the Enzyme Prefilter and Remove the Water Supply Bowl holding it in the position shown clean it with a vacuum cleaner ly d rd J f NOX Do not wash the Enzyme Prefilter mm zZ Remove the Enzyme Prefilter Remove dust with Hold the Water Supply
11. erating if it receives more than a prescribed level of vibration due to causes such as earthquakes or impact Error Detection Function and Safety Functions 30 Troubleshooting The unit cannot be operated or suddenly stops operating Operation of this unit may be automatically stopped by the error detection function or the safety function see previous page It may not be possible to resume operation depending on the type of error If you encounter an issue inspect the unit first according to the checklist below V Has the unit received significant impact or vibration Operation may have been stopped by the impact and vibration detection function Resume operation in conditions with no vibration or impact V Is the unit tilting The unit cannot operate if it is tilting or lying down Install the unit on a stable flat surface and resume operation V Is there a gap between the main unit upper body and lower body Operation is not possible if there is a gap as the contact points are not aligned V Is the Rotate the main unit upper body and align the contact points unit overfilled with water or is the water low Operation stops if the unit is overfilled with water or if the water is low If the unit is overfilled with water take out the Water Supply Bowl and remove water until the water level is below the full line If the water is low add more water Error codes If the cause cann
12. ess 17 How to Use Selecting a menu Various functions for this unit can be selected from five menus Auto Manual 24h Timer Setting and Filter Cleaning Sign Press the Control Ring while the Operating status is displayed to enter the menu selection screen A menu can then be selected by rotating the click wheel and scrolling through the screen Long press the Control Ring to return to the standard screen from the menu selection screen long press to return to standard screen e Menu selection screen IN A J Operate in Auto mode Auto Vv aN a Operate in Manual Mode Manuell VY N Open 24h Timer screen DAh Timer Vv N Open Settings screen Einstellungen NV Open screen for resetting Filter the filter cleaning sign Reinigungssymb Vv How to Use 18 Current Time 19 How to Use This unit equipped with a clock ba Akt Uhrzeit eingest function 24h Timer The message on the left is displayed automatically the first time the 24h Timer mode is selected The current time can also be set in Settings Set the time by following the steps below The clock on this unit uses 24 hour time Akt Uhrzeit Akt Uhrzeit 1 Era Ed Sian Ize Einst beendet 13 00 13 45 13 45 Set the hour using the Set the minute using Einst beendet is Control Ring and then the Control Ring and displayed and the setting click to commit It then click to commit
13. et when installing to spill causing electric shock or fire Warning e Do not use for purposes other than those written on this instruction manual e Do not allow children or persons unable to understand the instructions on the manual operate the product e To avoid electrocution risks do not soak the product cord or plug in water or any other liquid e Do not disassemble except for maintenance purposes Fire electrocution or serious injury may result For repairs please consult your dealer or BALMUDA Europe Service Center P 45 e Insert the power plug completely e Do not use if there is damage to the cord or power plug or the plug connection is loose e Unplug when not in use e Do not damage modify bend pull twist or bundle the cord Do not place heavy things on top or pinch the cord e Keep the cord away from sharp edges of tables counters and hot surfaces e Use general household power outlet for the AC adapter e To unplug always hold the AC adapter to remove the plug and do not pull the cord Remove any dust from the plug on a regular basis e To avoid fire or electrocution risks do not use together with a solid state fan speed control device e Do not insert wires clips etc into the air vents or air outlet Doing so may cause electric shock e Make sure the BALMUDA Multi Plug AC Adapter is firmly secured when in use e Always unplug the product before maintenance Do not plug unplug with a wet hand e
14. he Water Supply Bowl before draining the water Draining the water while the Water Supply Bowl is in the main unit may cause water to spill inside the unit damaging the product or causing electric shock e Be sure to remove the water from the Water Supply Bowl before moving the unit Moving the unit with water still in the Water Supply Bowl may cause it to spill damaging the product or causing electric shock e Do not install on an unstable surface such as thick piled carpet Doing so causes the unit to topple and the water to spill causing electric shock or fire e Do not use on or near household appliances such as a TV or heater If the unit topples and spills water it may cause fire or electric shock e Do not climb or sit on the product Doing so may cause the unit to topple causing injury e Take care to ensure that children do not play with the Control Ring Water Supply Bowl Plate etc Doing so may cause unexpected injury For Safety 36 A N Cautions e Do not use the product in the following places since it may cause electrocution or fire a Near gas stoves or near open flames b In around flammable gases c In around water or rain e Do not transport the assembled product Place the product in a box before transportation Otherwise the product or parts may get damaged e Do not use sprays or liquids on the product Inflammable sprays may cause fire or explosion Other sprays may damage the plastic or paint e Do not let child
15. icates a prohibited action that must not be performed D Instruction Indicates an instruction that must be followed For Safety 34 24h Timer button The 24 hour Timer can be activated deactivated directly by long pressing this button For information on the 24h Timer button Power button LO Turns the power on and off al The child lock can be set or released by long pressing and the power button for approximately two seconds Rain i Designed by BALMUDA Control Ring Operating Section Most operations such as adjusting the air volume setting the or clicking the Control Ring IN The power can also be turned on by clicking the Control Ring and N Aill humidity selecting and activating menu s are performed by rotating Y can be turned off by long pressing the Control Ring N display area at the front The switch is located in the Rotate How to Use 12 A N Warning e If using in a room with dogs cats and other indoor pets take care to ensure that they do not damage the unit or power cord Doing so results in fire or damages the product e This unit is for use in Germany Austria and Switzerland only Do not use in other countries e Do not use AC adapters other than that specified Doing so may damage the product or cause fire e Do not use a power supply other than AC100 240 V Doing so may damage the product or cause fire e Be sure to take out t
16. in firmly until it clicks Qo eee UY Set the Enzyme Prefilter 9 Before Use Hold the main unit upper body in the position shown Do not hold this area as your fingers may get caught Contact point BALMUDA ANZ u Set the main unit upper body Set the main unit upper body and lower body aligning the contact points Place the upper body close to its final position and rotate from there When the contact points are aligned the upper and lower body will fit together completely with no gap Take care not to get your fingers caught The Control Ring contains a magnet allowing it to be set simply by placing it on the main unit Connect the AC adapter by inserting all the way in i The AC adapter makes JIi a popping sound when a it is correctly connected Insert the AC adapter into a wall een 11 outlet to complete preparation Before Use 10 Installation 11 Before Use m Be sure to observe the following points when installing Do not use under a table or desk This blocks the air outlet preventing the humidified air from traveling throughout the room Do not install on an unstable surface Install at a suitable distance from walls and furniture to achieve such as thick piled carpet Doing so the intended performance of this product Allow at least causes the unit to topple and the water 120 cm of space above the air outl
17. it of the current time is completed The clock needs to be reset if the plug is removed from the wall outlet for one week 24h Timer Settings Select 24h Timer from the menu selection screen AN 24h Timer To set An hourly nd for starting and stopping operation needs to be set before using the 24h Timer Ein 2 4h Einst Zuruck Click 24h Einst Se he ier ee Ein Ein 24h Timer 2 4h Einst Ja Zur ck Abbrechen Ein To turn on gt Click Ein Click Ja The 24h Timer is turned on Aus Aus 24h Timer To turn off 24h Einst Ja a Zur ck Abbrechen a u ll B II ll The 24h Timer Click Aus Click Ja Ed Setting the unit to operate or D START is displayed when set to operate stop each hour START The unit operates during these hours Rotate the Control Ring to scroll through O STOP is displayed when set to stop The unit stops operating during the screen and click to set this unit to STOP these hours operate or stop each hour n START Rotate to scroll OO gi 22 00 23 00 START Click to set the unit to operate or stop e START 19 45 A Festlegen e START e STOP v Abbrechen 24 00 Festlegen Click OK How to Use 20 m Settings Unit Settings ga Einstellungen Vw Rotate to Einstellungen in the menu seleetion screen and then click amp to select it Display Hell
18. king it approximately once every two weeks to one month Clean with baking soda if the output air has an odor or clean with citric acid to remove scale mainly slime or calcium salt white solid on the Humidifying Filter Dissolve baking soda or citric acid in cold or lukewarm water deep enough to cover the filter and soak the filter for around 60 minutes Baking soda and citric acid can be purchased from drugstores home centers etc Clean by soaking for If the output air has an odor approx 60 m i n Approx 60g of baking soda per of water Thoroughly dissolve the baking soda in the water Cleaning the Humidifying Filter To remove scale or calcium salt Approx 6 5g of citric acid per of water Do not soak the filter in the Water Thoroughly dissolve the citric Seely Bowl a aa acid in the water container such as a bucket If baking soda or citric acid remains in the filter this may cause an Rinse thoroughly with fresh water 2 3 times after soaking odor or damage the unit a rail Do not soak or wash the Enzyme Prefilter Do not clean the Humidifying Filter with hot water Q How to Use 26 Replacing the Filter 27 How to Use The standard replacement time of the filter is six months Replacement may be required sooner depending on how the unit is used or the usage environment The life may be shorter depending on the hardness of your tap water e Depending o
19. l h AOOmI h 500 ml h 600 ml h Rated output voltage DC 12V performance 1 Rated secondary current 3A Power consumption DIN ZS Cord length Approx 1 8m Operating noise 6dB 42dB Recommended room size Approx 28m Capacity of Water Supply Bowl 4 2 2 Dimensions of main unit W 350 mm x D 350 mm x H 374mm Weight of main unit Approx 5 7kg approx 10kg when full Timer 24 hour Timer function Usage environment For household use for use in Germany Austria and Switzerland only for indoor use only Safety equipment Impact vibration detection Vibration recognition threshold Vibration equivalent to a strong earthquake Topple alert Tilt recognition threshold Approx 15 Error notification function Main unit operation error detection Overfil Water Supply Bowl error 1 The humidification performance refers to the maximum performance in a room temperature of 20 C and humidity of 30 39 Specifications Warranty and AfterService For inquiries on repairs usage or maintenance please call the BALMUDA Europe Service Center P 45 or contact your dealer 1 Please receive the warranty card from your dealer with the purchase date and the dealer name filled in 2 The warranty is valid for 2 years from the date of purchase For repairs during the warranty period please contact the BALMUDA Europe Service Center P 45 or your dealer The repairs will be carried out according to the warranty 3 Contact the BALMUDA Europe Service Center P 45
20. n the usage conditions replacement may be required due to dirt buildup or deformation after several weeks or several months A charge applies for new filters even during the warranty period as they are a consumable item Please dispose of your old filter in accordance with your local area s waste disposal system and regulations Main materials of the Enzyme Prefilter Polypropylene polyester rayon etc Main materials of the Humidifying Filter Polypropylene polyester polyolefin die unten stehende Webseite MBALMUDA Europe Service Center Anruf gebuhrenpflichtig Besuchen Sie zum Erwerb von Ersatzfiltern nur an Wochen und Gesch ftstagen 9 00 16 30 040 897 25 35 15 How to replace the Enzyme Prefilter Follow the steps below to replace the Enzyme Prefilter with a new one filter replacement sold separately 2 Lift the opposite side to remove the cover 1 Lift one side lt addtddiidt ATER AYS z RER ILL y j PRT LU TTTEITT T ul ATI The cover is made out of two parts WAAR RANE Remove the cover by grasping the position 2 Remove the covers one by one 3 Remove the two covers indicated in the picture and lifting as In the procedure shown by to remove the filter the picture New filter Old filter P O2 gt TTL LLL Coser ATTA aiji H Wiii 4 Ez A j atii jo T ee SO Replace the old filter with a
21. new one Attach the cover When replacing the old filter make sure to set the When attaching the cover make sure that all new one with its front side facing upward Take the 20 positions with a mark are firmly care not to confuse the front side and back side inserted They will make a click sound when correctly inserted How to Use 28 Error Detection Function and Safety Functions BALMUDA AM BBA Main Unit Operation Error Detection The unit stops operating if an abnormality is detected inside the unit such as motor rotation or sensor 29 Error Detection Function and Safety Functions BALMUDA NT Child Lock This can be set or released by pressing and holding the Power Button for around two seconds to prevent young children from operating this unit by mistake No operations except releasing the Child Lock are possible when the Child Lock is set The Child Lock can be set even when the unit is on standby Overfilling The unit stops operating if it is filled with more than the maximum volume of water Take out the Water Supply Bowl and remove water until the water is below the full line Tilt Alert The unit cannot operate if it is tilting or toppled Water Supply Bowl Error The unit cannot operate when the Water Supply Bowl is not set An error may also occur if the Water Supply Bowl is not set correctly NN Impact vibration detection The unit stops op
22. not see steam Or vapor emitting from the unit This is not a fault This unit is a evaporative humidifier that uses a humidifying filter to add moisture to the air It does not emit steam or vapor Air emitted from the unit is cold This is not a fault Ihe emitted air may be cooler than the surroundings because heat is lost from the water when it is vaporized If Problems Occur 44 Kundenbetreuung fur Anfragen zu Gebrauch Wartung Reparatur lM BALMUDA Europe Service Center nur an Wochen und Gesch ftstagen 9 00 16 30 W Online Anfragen Bitte starten Sie einen Suchvorgang mit dem Schl sselwort BALMUDA oder besuchen Sie uns bei http www balmuda com support Bitte pr fen Sie vor Ihrer Anfrage das Produktmodell auf der beiliegenden Garantie 45 Inquiries BALMUDA HOM PO31 Rev 1 0 2014 8
23. or Before Use 6 Set the filter so that the guide at the bottom of the Water Set the Humidifying Filter Fit onto the protrusion at the Supply Bowl comes within firmly to the Humidifying Filter center the interior of the filter Holder r Humidifying Filter Holder Humidifying Filter Assembly Fit the 6 claws in place Set the silver ion cartridge Set the Humidifying Filter Align the claws of the on the protrusion at the at the center ofthe Water Humidifying Filter bottom of the Water Supply Bowl aligning it Holder with the notches Supply Bowl with the guide on the Water Supply The silver ion cartridge will be The Humidifying Filter is packaged Bowl attached to the Water Supply in a plastic bag Be sure to Bowl with tape when you unpack remove the plastic bag before the unit Be sure to remove the USING 7 Before Use tape before using Rotate firmly until the marks Align the three protrusions Set the Water Supply Bowl are aligned Fully insert when connecting and notches so that it is flat T i Rotate the Humidifying 5 Connect the adapter Set the Water Supply 7 Set the Water Supply Filter Holder to lock it in plug Bowl Plate Bowl place Firmly lock the 6 claws in Do not connect the AC place Improper assembly adapter to a wall outlet until may cause malfunction assembly is complete Before Use 8 Push the Enzyme Prefilter
24. ot be determined from oe Error codes are displayed when an error is detected the above checklist contact the Fehler Providing the displayed error code when contacting BALMUDA Europe Service Center rn the BALMUDA Europe Service Center may make it BALMUDA Europe Service Center easier for representatives to assist you in solving nur an Wochen und Gesch ftstagen 9 00 16 30 the problem 31 Error Detection Function and Safety Functions 040 897 25 35 15 AC adapter BALMUDA Multi plug Adapter The BALMUDA Multi plug adaptericatlug unit can be attached to point 4 different directions so that the AC adapter can be inserted accordingly to the wall outlet pease Remove aci PUSH button gt 2 Press the PUSH L button Slide the plug unit Fit the plug unit in out place Slide the plug unit in until it clicks AC adapter 32 Safety Precautions Be sure to observe these precautions Read the Safety Precautions thoroughly before using this product to ensure correct use The safety precautions in this manual are included to ensure safe and correct use of this product and to prevent danger or damage to the user or other parties Explanation of indications A N Warn I ng Indicates an action that may result in death or severe injury Indicates an action that may result in minor injury or damage IN Ca u t lon to the user s home or property Explanation of symbols S Proh bited Ind
25. ren use by themselves Keep out of reach of small children Children should use only under adult supervision e Store in a dry place out of reach of children e Take care not to block the air vents or air outlet with curtains etc Doing so results in malfunction or damages the product e Keep long hair and loose clothing away from the moving parts e For indoor use only e This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved e Do not drink the waterfrom the Water Supply Bowl or allow others to drink it This is a health hazard 37 For Safety A N Cautions e Keep the inside of the unit clean with regular cleaning Replace the water in the tank with new plain tap water every day e Install on a flat surface Do not install on thick piled carpet or on an uneven floor e Do not clean this unit with chlorine based or acidic detergents This may create toxic gases which are a health hazard e Be sure to set the Enzyme Prefilter and Humidifying Filter on this unit The intended performance is not achieved if the unit is operated without setting these This may also damage the product e Only use plain tap water suitable for drinking Do not use the following types of liquid Doing so damages the p
26. roduct Hot water over 40 C as well as water that contains chemicals aromatics well water water that contains aroma oil water that contains detergent water purified by a water purifier alkaline ionized water or mineral water e Remove the water and be sure to remove the plug from the wall outlet when the unit will not be used for a period of time Otherwise electric shock short circuiting or fire may occur due to insulation deterioration e Do not use under a table or desk This stops the humidified air from traveling throughout the room e f an abnormality occurs stop using the unit and request an inspection Contact your dealer or the BALMUDA Europe Service Center P 45 to request an inspection e Do not lift the upper body while the unit is operating Doing so damages the product e Do not disassemble the silver ion cartridge Take care to ensure that contents do not enter mouth etc e Do not place other objects on this unit This blocks the air outlet preventing the intended performance e Take care to ensure that water does not enter the air outlet when filling Doing so may damage the product For Safety 38 Specifications Main unit AC adapter Product name Rain Rated input voltage AC 100 240 V Model ERN 1000SD Rated input capacity 79 93VA Operating modes AirVolume1 AirVolume2 AirVolume3 AirVolume4 AirVolume5 Rated frequency 50 60 Hz Maximum humidification 150ml h 250 m
27. s a guide If Problems Occur 42 43 FAQ Symptom Check Points Solution Air volume is weak Is the humidity setting set to a low value in auto mode operation Rotate the Control Ring in the direction to increase the humidity setting O o TE N oD Is the air volume set to a low value in manual mode operation Rotate the Control Ring in the direction to increase the air volume u N Does the filter need cleaning Clean the filter Are the air vent holes blocked by something such as a curtain or carpet Check the installation environment of the unit u N UJ no U W ges Ul u N Cannot switch the operating mode is the Child Lock set Release the Child Lock u N The air volume indicator is flashing white and the unit has stopped operating Has the error detection function operated When an error is detected the unit will auto matically stop and the output indicator will flash in white Disconnect and reconnect the AC adapter from the wall socket to clear the error detection function and restart If for any reason normal operation does not resume contact the BALMUDA Support Oenter P 48 u N Ne Filter cleaning indicator is displayed Has the unit been left for a long time without being cleaned Clean the filter and then reset the filter cleaning sign See Main
28. tenance on P 23 for details on cleaning Indicator is dark If Problems Occur is the Display Brightness setting of the main unit set to a dark setting Check the Display Brightness settings of the main unit Symptom Check Points Solution Indicator is dark Has more than 1 minute elapsed without operating the unit gt If the unit is not operated for more than 1 minute the indicators on the main unit switch to low brightness Operating sound is quiet Humidity does not increase is the Operating Sound setting of the main unit set to a low setting Is the room where you are using this unit larger than the recommended room size Check the Operating Sound settings of the main unit Be sure to use this unit in a room that is within the recommended room size range is there an open window or door Close all windows and doors when using this unit Unit emits an odor Has the unit been left for a long time without being cleaned Clean the filter See Maintenance on P 23 for details on cleaning The 24h Timer does not function correctly when set Is the current time correct This unit is equipped with a clock function Set the clock to the correct time using the setting mode The clock time is reset ifthe AC adapter remains disconnected from the power socket for approximately 1 week Set the clock again can
29. ty in the room Five volume levels can be set 1 2 3 4 or 5 and the setting can be changed by rotating the Control Ring The air volume is set at 1 when using this mode for the first time Humidity setting Five levels can be set 40 45 50 55 or 60 Standard screen in Auto mode Air volume Five levels can be set 1 2 3 4 Or 5 Air volume meter e The five volume levels are indicated on a meter Standard screen in Manual Mode 24h Timer setting the unit to operate or stop each hour Operation status operating or stopped can be set for each hour The 24h Timer is active in both Auto mode and Manual Mode modes can be switched while the timer is operating Hourly operation statuses operating or stopped can be set for 24 hours making it possible to operate the unit as desired by timer all day This allows convenient use according to the patterns of your daily life Filling with Water Pour water directly into the water supply hole using a kettle etc Water volume 1 Water volume 2 Water volume 3 Water volume 4 Water volume 5 Full Stop filling with water When you begin filling with water the water volume sensor activates and the water volume will be indicated on the display full at around 4 28 The Water Supply Bowl is Be careful of the following points when filling with water Stop filling with water when Full is displayed Otherwise Take care to ensure that w
30. ut to 5 The volume of air can be adjusted manually when operating in Manual Mode e When operating in Auto mode this unit adjusts the air volume automatically This is lit when the Child Lock function is activated by long pressing the Power Button for around two seconds Remaining water volume icon The volume of water remaining in the Water Supply Bowl is displayed Standard screen When the air volume is The green LEDs indicates set to 0 no air output the air volume levels During the Auto mode when the room The image above shows the status reaches a sufficient humidity the air volume when an air volume of 4 is indicated will automatically turn to O and the air output will stop The indicator will turn completely white when the volume is O How to Use 14 Operating Mode and 24h Timer 15 How to Use Auto mode automatic operation Auto mode is an automatic operation mode that maintains a fixed humidity in the room A humidity level is set manually and the unit automatically adjusts the air volume to reach this humidity Five humidity levels can be set 40 45 50 55 or 60 and the setting can be changed simply by rotating the Control Ring The humidity is set at 50 when using this mode for the first time Manual Mode setting the air volume manually Manual Mode is a mode in which the air volume is set manually The air volume can be set as desired regardless of the humidi
Download Pdf Manuals
Related Search