USER MANUAL - AV-iQ
Contents
1. you have to install and configure it For detailed instructions on how to install and configure your Ethernet port see the K Config Configuration Guide available for download at the Kramer Web site www kramerelectronics com Connecting the K NET Port The K NET port is wired as shown in Figure 4 K NET PINOUT K NET G B A12V Red 12V Black GND Figure 4 K NET Pinout Connection 5 Operating the SL 1N You can operate your SL 1N using A K NET compatible remote controller or auxiliary control panel To operate your device using an external K Net device see the K Config Configuration Guide The optional RC 4 Infrared remote control transmitter To operate your device using the infrared remote controller see the User Manual packed with the remote controller A PC running Site CTRL control software To operate your device using Site CTRL see the Site CTRL and Web Access Online User Guide 6 Technical Specifications BI DIRECTIONAL PORTS 2 RS 232 and K NET on terminal block connectors 1 Ethernet on an RJ 45 connector 1 USB for programming 1 infrared sensor 1 infrared on a 3 5mm mini jack connector OUTPUTS 2 infrared and 3 relays 36V AC or DC 2A 60V AC maximum on non inductive load on terminal block connectors DEFAULT IP SETTINGS IP number 192 168 1 39 Mask 255 255 0 0 Gateway 0 0 0 0 INDICATORS LED indicator for each function POWER CONSUMPTION 12V DC 2A from power supply or 12V2. DC over K NET connection OPERATING TEMPERATURE 0 to 40 C 32 to 104 F STORAGE TEMPERATURE 40 to 70 C 40 to 158 F HUMIDITY 10 to 90 RHL non condensing DIMENSIONS 12cm x 7 2cm x 2 4cm 4 7 x 2 8 x 1 0 W D H WEIGHT 0 3kg 0 7lbs INCLUDED ACCESSORIES Power supply OPTIONAL ACCESSORIES RK 3T 19 rack mount RC 4 remote controller external IR receiver C A35M IRR 50 and IR receiver extension cables C A35M A35F 50 Specifications are subject to change without notice at http www kramerelectronics com INPUTS SL 1N Technical Specifications 11 LIMITED WARRANTY The warranty obligations of Kramer Electronics for this product are limited to the terms set forth below Whatis Covered This limited warranty covers defects in materials and workmanship in this product What is Not Covered This limited warranty does not cover any damage deterioration or malfunction resulting from any alteration modification improper or unreasonable use or maintenance misuse abuse accident neglect exposure to excess moisture fire improper packing and shipping such claims must be presented to the carrier lightning power surges or other acts of nature This limited warranty does not cover any damage deterioration or malfunction resulting from the installation or removal of this product from any installation any unauthorized tampering with this product any repairs attempted by anyone unauthorized by K
3. Disconnect the power and unplug the unit from the wall before installing Recycling Kramer Products The Waste Electrical and Electronic Equipment WEEE Directive 2002 96 EC aims to reduce the amount of WEEE sent for disposal to landfill or incineration by requiring it to be collected and recycled To comply with the WEEE Directive Kramer Electronics has made arrangements with the European Advanced Recycling Network EARN and will cover any costs of treatment recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility For details of Kramer s recycling arrangements in your particular country go to our recycling pages at htto www kramerelectronics com supportrecycling Overview The SL 1N is a highly versatile controller an all in one extended remote control panel for control of AV equipment especially projectors and associated equipment in any room such as classrooms boardrooms or auditoriums It streamlines operations and simplifies control by integrating audio video and computer video sources into a centralized system The SL 1N features e 2 bidirectional RS 232 ports to control AV equipment such as projectors LCD and PDP displays power amplifiers switchers and scalers e 3 relay contact closure ports to control other room items related to the AV system such as raising and lowering drapes the screen or the projector e IR control 1 input 3 5mm and 2 outputs termin
4. KRAMER ELECTRONICS LTD USER MANUAL MODEL SL 1N Master Room Controller P N 2900 300399 Rev 1 EJAT4 E SL 1N Quick Start Guide This guide helps you install and use your product for the first time For more detailed information go to http bit ly k prod downloads to download the latest 5 manual or scan the QR code on the left Step 1 Check what s in the box SL 1N Master Room Controller g 1 Quick Start Guide o g y 1 Power supply 12V DC Kramer RC IR3 Infrared Remote 4 Rubber feet Control Transmitter with batteries and user manual Step 2 Install the SL 1N Attach the rubber feet and place on a table or mount the SL 1N in a rack using an optional RK 3T rack adapter Step 3 Connect the inputs and outputs RE IR RS 232 K NET 102 t 3 1 6 2 I lumi G RX2TX2I G B A 2V LMDC EM IG E Blinds ETHERNET DEFAULT Projector Laptop Apa Screen DVD 2 Display Step 4 Connect the power Connect the 12V DC power adapter to the SL 1N and plug the adapter into A the mains electricity Step 5 Operate the SL 1N Operate via the RC keypad IR remote control K NET or Ethernet Contents 1 Introduction 2 Getting Started 2 1 Achieving the Best Performance 2 2 Safety Instructions 2 3 Recycling Kramer Products 3 Overview 8 1 Defining the SL 1N Master Room Controller 4 Connecting the SL 1N 4 1 Connecting the RS 232 Port 4 2 Connecting the Ethe
5. LAY 3 to a screen 2 Connect the IR outputs as follows Connect IR OUTPUT 1 to DVD player 1 Connect IR OUTPUT 2 to DVD player 2 3 Connect the RS 232 ports as follows Connect RS 232 port 1 to a projector Connect RS 232 port 2 to a display 4 Connect the IR sensor as follows Connect IR INPUT to an IR sensor 5 Connect the Ethernet port to a network 6 Connect the K NET port to any RC device in this example an RC 63D over K NET Connecting the SL 1N 4 1 Blinds IR DVD Player 1 Screen Display DVD Player 2 Figure 2 Connecting the SL 1N Master Room Controller Connecting the RS 232 Port To connect an AV device to the SL 1NN connect the RS 232 9 pin D sub port on your device to the RS 232 terminal block on the rear panel of the SL 1N controller as shown in Figure 3 RS 232 Device SL 1N RS 232 Pin 5 a Rani 6 Renal 1111 Figure 3 RS 232 Connection SL 1N Connecting the SL 1N 4 2 4 3 Connecting the Ethernet Port The Ethernet connection of the SL 1N allows you to perform all control functions of the SL 1N over the Internet using a PC running the Kramer Site CTRL control program To connect the SL 1N to a network 1 Connect the Ethernet port of the SL 1N to the Ethernet port on a network hub or network router via a straight cable with RJ 45 connectors 2 Atthe other end connect a PC running Site CTRL to the network After connecting the Ethernet port
6. abling remote control and management of the AV equipment e Production studios rental and staging Introduction 2 1 Getting Started We recommend that you Unpack the eguipment carefully and save the original box and packaging materials for possible future shipment Review the contents of this user manual Go to http www kramerelectronics com support product downloads asp to check for up to date user manuals application programs and to check if firmware upgrades are available where appropriate Achieving the Best Performance To achieve the best performance Use only good quality connection cables we recommend Kramer high performance high resolution cables to avoid interference deterioration in signal quality due to poor matching and elevated noise levels often associated with low quality cables Do not secure the cables in tight bundles or roll the slack into tight coils Avoid interference from neighboring electrical appliances that may adversely influence signal quality Position your Kramer SL 1N away from moisture excessive sunlight and dust This equipment is to be used only inside a building It may only be connected to other equipment that is installed inside a building 2 2 2 3 Getting Started Safety Instructions Caution There are no operator serviceable parts inside the unit Warning Use only the Kramer Electronics input power wall adapter that is provided with the unit Warning
7. als blocks e IR Learning that learns commands from any IR remote e Compatibility with Kramer Site CTRL software for network remote control and management over the Ethernet port e AK NET control channel for connecting compatible user interfaces and supplying power and control data over a single cable e A USB port for loading device firmware e Flexible control using Ethernet K NET IR sensors and external IR commands 3 1 Defining the SL 1N Master Room Controller This section defines the SL 1N M et 11 62 iat e Rena oe Ria DC OOO E e ETHERNET DEFAULT IR INPUTS NET K NET p RS 232 IR RELAYS l status 7 21 p 211 2 31 Go 9000 00000 fir Master Room Controller Figure 1 SL 1N Master Room Controller Feature Function RELAYS Terminal Blocks Connect to low voltage relay driven devices from 1 to 3 IR Output Terminal Blocks Connect to IR emitter cables from 1 to 2 RS 232 Terminal Blocks Connect to the RS 232 devices from 1 to 2 4 ETHERNET RJ 45 Connector Connects to the PC or other serial controller through computer networking LAN 5 DEFAULT Pushbutton Press to reset to factory default definitions IP number 192 168 1 39 mask 255 255 0 0 gateway 0 0 0 0 also to remove the current configuration First disconnect the power cord and then connect it again while pressing the ETH Factory Reset button The unit powers up and loads its memory with the factory default definitions and e
8. ay the shipping costs necessary to return this product once the repair is complete 2 Replace this product with a direct replacement or with a similar product deemed by Kramer Electronics to perform substantially the same function as the original product 3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty What Kramer Electronics will not do Under This Limited Warranty If this product is returned to Kramer Electronics or the authorized dealer from which it was purchased or any other party authorized to repair Kramer Electronics products this product must be insured during shipment with the insurance and shipping charges prepaid by you If this product is returned uninsured you assume all risks of loss or damage during shipment Kramer Electronics will not be responsible for any costs related to the removal or re installation of this product from or into any installation Kramer Electronics will not be responsible for any costs related to any setting up this product any adjustment of user controls or any programming required for a specific installation of this product How to Obtain a Remedy under this Limited Warranty To obtain a remedy under this limited warranty you must contact either the authorized Kramer Electronics reseller from whom you purchased this product or the Kramer Electronics office nearest you For a list of aut
9. horized Kramer Electronics resellers and or Kramer Electronics authorized service providers please visit our web site at www kramerelectronics com or contact the Kramer Electronics office nearest you In order to pursue any remedy under this limited warranty you must possess an original dated receipt as proof of purchase from an authorized Kramer Electronics reseller If this product is returned under this limited warranty a return authorization number obtained from Kramer Electronics will be required You may also be directed to an authorized reseller or a person authorized by Kramer Electronics to repair the product If itis decided that this product should be returned directly to Kramer Electronics this product should be properly packed preferably in the original carton for shipping Cartons not bearing a return authorization number will be refused Limitation on Liability THE MAXIMUM LIABILITY OF KRAMER ELECTRONICS UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS IS NOT RESPONSIBLE FOR DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION OR UNDER ANY OTHER LEGAL THEORY Some countries districts or states do not allow the exclusion or limitation of relief special incidental consequential or indirect damages or the limitation of liability to specified amounts so the above limitations or e
10. ot distributed by Kramer Electronics or iii this product is not purchased from an authorized Kramer Electronics reseller If you are unsure whether a reseller is an authorized Kramer Electronics reseller please visit our Web site at www kramerelectronics com or contact a Kramer Electronics office from the list at the end of this document Your rights under this limited warranty are not diminished if you do not complete and return the product registration form or complete and submit the online product registration form Kramer Electronics thanks you for purchasing a Kramer Electronics product We hope it will give you years of satisfaction KRAMER For the latest information on our products and a list of Kramer distributors visit our Web site where updates to this user manual may be found We welcome your guestions comments and feedback Web site www kramerelectronics com E mail info Okramerel com institute of ality amp Control SAFETY WARNING T Disconnect the unit from the power supply before opening and servicing I
11. ramer Electronics to make such repairs or any other cause which does not relate directly to a defect in materials and or workmanship of this product This limited warranty does not cover cartons eguipment enclosures cables or accessories used in conjunction with this product Without limiting any other exclusion herein Kramer Electronics does not warrant that the product covered hereby including without limitation the technology and or integrated circuit s included in the product will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used How Long Does this Coverage Last Seven years as of this printing please check our Web site for the most current and accurate warranty information Whois Covered Only the original purchaser of this product is covered under this limited warranty This limited warranty is not transferable to subseguent purchasers or owners ofthis product What Kramer Electronics will do Kramer Electronics will at its sole option provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty 1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time free of any charge for the necessary parts and labor to complete the repair and restore this product to its proper operating condition Kramer Electronics will also p
12. rases all stored presets unit The ground connection is sometimes connected to the shield of the RS 485 cable 7 12V DC Connector For supplying power to the unit s IR IN Sensor and LED Accepts IR remote commands 9 IR INPUT 3 5mm Mini Jack Connects to a remote infrared sensor K NET Terminal Block PIN GND is for the ground connection PIN B and PIN A are for RS 485 and PIN 12V is for powering the SL 1N Overview BEN Feature Function 11 K NETLED Illuminates when the K NET is active red transmit green receive 12 RS 232 Tx Rx LEDs Illuminates while transmitting receiving on an RS 232 port 1 to 2 red transmit green receive IRLEDs illuminates when an IR port is active RELAYS LEDs illuminates when a relay is active 1 to 3 15 SRVC DIP Switch Slides down for service use only slides up for normal operation 16 K NET TERM DIP Switch Slides down for K NET termination slides up for not terminated 17 PROGRAM USB Connector Connect to a computer for unit configuration and firmware upgrading 4 Connecting the SL 1N Always switch off the power to each device before connecting it to your SL 1N After connecting your SL 1N connect its power and then switch on the power to each device To connect the SL 1N as the example in Figure 2 illustrates do the following 1 Connect the RELAY terminal block connectors as follows Connect RELAY 1 and 2 to blinds Connect RE
13. rnet Port 4 3 Connecting the K NET Port 5 Operating the SL 1N 6 Technical Specifications Figures Figure 1 SL 1N Master Room Controller Figure 2 Connecting the SL 1N Master Room Controller Figure 3 RS 232 Connection Figure 4 K NET Pinout Connection OOO S OF VONN A O CO OO ON Introduction Welcome to Kramer Electronics Since 1981 Kramer Electronics has been providing a world of unigue creative and affordable solutions to the vast range of problems that confront video audio presentation and broadcasting professionals on a daily basis In recent years we have redesigned and upgraded most of our line making the best even better Our 1 000 plus different models now appear in 14 groups that are clearly defined by function GROUP 1 Distribution Amplifiers GROUP 2 Switchers and Routers GROUP 3 Control Systems GROUP 4 Format Standards Converters GROUP 5 Range Extenders and Repeaters GROUP 6 Specialty AV Products GROUP 7 Scan Converters and Scalers GROUP 8 Cables and Connectors GROUP 9 Room Connectivity GROUP 10 Accessories and Rack Adapters GROUP 11 Sierra Video Products GROUP 12 Digital Signage GROUP 13 Audio and GROUP 14 Collaboration Congratulations on purchasing your Kramer SL 1N Master Room Controller which is ideal for the following typical applications e Controlling multimedia rooms such as classrooms auditoriums conference rooms and so on and is Site CTRL compatible en
14. xclusions may not apply to you Exclusive Remedy TO THE MAXIMUM EXTENT PERMITTED BY LAW THIS LIMITED WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES REMEDIES AND CONDITIONS WHETHER ORAL OR WRITTEN EXPRESS OR IMPLIED TO THE MAXIMUM EXTENT PERMITTED BY LAW KRAMER ELECTRONICS SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IF KRAMER ELECTRONICS CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW THEN ALL IMPLIED WARRANTIES COVERING THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY TO THIS PRODUCT AS PROVIDED UNDER APPICABLE LAW IF ANY PRODUCT TO WHICH THIS LIMITED WARRANTY APPLIES IS A CONSUMER PRODUCT UNDER THE MAGNUSON MOSS WARRANTY ACT 15 U S C A 2301 ET SEQ OR OTHER APPICABLE LAW THE FOREGOING DISCLAIMER OF IMPLIED WARRANTIES SHALL NOT APPLY TO YOU AND ALL IMPLIED WARRANTIES ON THIS PRODUCT INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR THE PARTICULAR PURPOSE SHALL APPLY AS PROVIDED UNDER APPLICABLE LAW Other Conditions This limited warranty gives you specific legal rights and you may have other rights which vary from country to country or state to state This limited warranty is void if i the label bearing the serial number of this product has been removed or defaced ii the product is n
Download Pdf Manuals
Related Search