MEX-12 Mobile Device Memory Exchanger User Manual
Contents
1. E mail info praftec com 40 Kugel St P O B 7209 Holon 58171 Israel Tel 972 3 5031045 Fax 1 586 4614268 PRAF Microcomputer Technologies Ltd Page 19 of 19 MEX 12 Mobile Device Memory Exchanger User Manual2. down and gt keys By the similar way select a target device family by Target Device Family menu And a target device by Target Device menu Target Device SCH 411 SCH 61 1 gt SCH 811 SCH 822 SCH 911 PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 6 of 19 3 2 Source And Target Devices Connections As soon as a target device has been selected the following menu will appear on the LCD prompting you to connect appropriate cables between the MEX 12 unit and the mobile devices In order to return to the main menu the lt key should be pressed lt Source Cable XX Target Cable XX gt lt STOP PC START gt e Connect a source mobile device to the Source Terminal located on the left side of the MEX 12 unit with a cable marked with the same number as indicated on LCD Source Cable XX where XX is the cable number e Connect a target mobile device to the Target Terminal located on the right side of the MEX 12 unit with a cable marked with the same number as indicated on LCD Target Cable XX where XX is the cable number Important notes Make sure that only one source mobile device and only one target mobile device are connected to the MEX 12 unit in accordance with your device selections Each mobile device requires to be either in ON or in OFF state depending on its model before starting phone book transferring proced
3. phone book Phone book of a GSM mobile device stored in SIM card may be handled directly by using SIM card reader cable connected to the MEX 12 unit In order to exchange data between SIM cards or between a SIM card and a mobile device please perform the following procedures e Puta SIM card into the plastic SIM holder provided with the SIM card reader cable e Insert the holder with SIM card into the SIM card reader e Connect the SIM card reader cable to either Source or Target terminal of the MEX 12 unit depending a direction you are going to exchange data on e Select SIM option in either Source Device Family or in Target Device Family menu depending on Source or Target terminal of MEX 12 the SIM is connected to e Data exchange procedure for SIM is similar to the procedure for mobile device Perform further steps in the same way as described in paragraph 3 PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 9 of 19 5 _MEXBAT Phone Book Handler Software 5 1 Program Functionalities MEXBAT program allows mobile devices phone books handling with a personal computer The program provides the following functionalities making the handling procedures simple and easy with its friendly Graphic User Interface Phone book uploading with the MEX 12 unit and storing it as MEX Base file mxb Phone book loading with the MEX 12 unit to mobile devices Phone book modifying New phone
4. ata Record Adding Activate the New Contact option of the Edit menu of the MEXBAT program in order to create a new contact data record enter a required data and confirm the contact creation by clicking OK button or cancel the session 5 7 Contact Data Record Deletion Select one or more contacts and activate the Delete Contact option of the Edit menu of the MEXBAT program in order to delete contact data record s and confirm the deletion by clicking OK button or cancel the session Note The deleted contact data records will be totally removed of their contact list phone book This may change some contact numbers by their shifting to new positions in the contact list PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 13 of 19 5 8 Contact Data Record Reserving Select one or more contacts and activate the Clear Contact option of the Edit menu of MEXBAT program in order to clear data record s and to reserve the record s in the contact list and confirm the contact clearing by clicking OK button or cancel the session Note The reserved and cleared data records will be kept of their positions in the contact list This may be useful for users who wish to track the quick dial contact numbers 5 9 Phone Number Prefix Modifying Phone number prefix modifying may be used in order to adjust a phone book numbers if area code access code or in
5. book creation Phone book printing 5 2 Program Installation MEXBAT program requires IBM compatible PC with minimum hardware requirements and with a Windows operation system installed on The following regular steps should be performed in order to install the program on a PC Insert the MEXBAT CD into CD ROM drive Run an installation program and follow its interactive installation instructions You will be prompted to run the program as soon as installation finished The program will add MEXBAT icon to desktop and into the Programs folder of the Windows start menu e The program may be uninstalled by running uninstall utility contained in the MAXBAT folder See readme file for additional recommendations if you have any problem while installing or using MEXBAT program and contact your local PRAFTEC dealer in case you have further problems PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 10 of 19 5 3 Phone Book Uploading The following procedures should be performed in order to upload a phone book from a mobile device or from a SIM card e Connect serial terminal of MEX 12 unit to a free COM port of PC with RS 232 serial cable supplied in the MEX 12 set e Run MEXBAT program and activate Settings dialog window located in menu Options In the Settings window set a proper COM port number you are going to use for the serial link between MEX 12 unit and PC
6. c You should unlock the device before activation phone book transferring procedure 7 2 Mobile Device Specific Troubleshooting Notes Motorola TDMA e The MEX 12 unit may instruct you with a message on its LCD to press 69 key sequence on a source mobile device and 801 key sequence on a target mobile device If so press key and hold it pressed for about three seconds and then 69 key sequence for the source device and 801 key sequence for the target device e Originally cable 1 should be used for operation with Motorola TDMA 7797 mobile device However if data exchange with the device failed and the device simultaneously turns itself ON and OFF you should use the cable 2 instead Panasonic e A Panasonic device must be connected to MEX 12 unit being in OFF power state and be powered ON only after all the required cable connections had been performed e Clear phone book of a Panasonic device manually with its menu Phone Book options before a new phone book loading into the device PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 17 of 19 8 Legal Notes This document refers to the MEX 12 Mobile Device Memory Exchanger and to the MEXBAT Phone Book Handler Software the product as the product s operation manual intended to help its users to use the system Copyright Notice Copyright PRAF Microcomputer Technologies Ltd 2004 All rights reserved All the tradema
7. e Select Source mobile device in the MEX 12 menus and connect a source device with its corresponding cable or SIM card reader as described in paragraph 3 e As the following menu has appeared on the LCD activate data uploading from the mobile device or SIM to PC by selecting Upload Data option of Mobile Device menu of the MEXBAT program SOURCE DEVICE TARGET DEVICE lt Source Cable XX Target Cable XX gt lt STOP PC START gt The following messages on LCD will indicate that data uploading is in progress and the process finishing Repeat the data uploading procedure if you wish to upload data from the next device of the same model and press gt key in order to finish or to select another model of source device MEXBAT Uploading completed Press gt to Finish PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 11 of 19 5 4 Phone Book Loading The following procedures should be performed in order to Load a phone book to a mobile device or to a SIM card e Connect serial terminal of MEX 12 unit to a free COM port of PC with RS 232 serial cable supplied in the MEX 12 set e Run MEXBAT program and activate Settings dialog window located menu Options In the Settings window set a proper COM port number you are going to use for the serial link between MEX 12 unit and PC e Select Target mobile device in MEX 12 menus and connect a targe
8. ft PRAF MICROCOMPUTER TECHNOLOGIES LTD St Kugel 40 P O B 7209 Holon 58171 Israel G Dra ee Tel 972 3 5031045 Fax 1 586 4614268 hittp www praftec com E mail info praftec com DOC REF NAME MX12UM 200 MEX 12 Mobile Device Memory Exchanger User Manual Rev 2 00 PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 1 of 19 Content le Introduction 1 1 MEX 12 General Description 1 2 MEX 12 Features 1 3 MEX 12 Physical Description Preparation For Use 2 1 MEX 12 Set Content 2 2 Turning The Unit ON OFF Phone Book Exchange Between Mobile Devices 3 1 Source And Target Devices Selection 3 2 Source And Target Devices Connections 3 3 Data Exchange Between Mobile Devices SIM Card Handling MEXBAT Phone Book Handler Software 5 1 Program Functionalities 5 2 Program Installation 5 3 Phone Book Uploading 5 4 Phone Book Loading 5 5 Contact Data Record Modifying 5 6 Contact Data Record Adding 5 7 Contact Data Record Deletion 5 8 Contact Data Record Reserving 5 9 Phone Number Prefix Modifying 5 10 Phone Book Opening and Saving 5 11 Phone Book Printing MEX 12 Unit Firmware Update Utility Troubleshooting 7 1 _ Common Troubleshooting Notes 7 2 Mobile Device Specific Troubleshooting Notes Legal Notes Contact Information PRAF Microcomputer Technologies Ltd Page 2 of 19 oo O1 COON OO MEX 12 Mobile Device Memory Exchanger User Manual 1 Introducti
9. ntained in the set corresponds your local mains voltage and contact to your local PRAFTEC dealer in case you find them as not corresponding or if you have any difficulties to identify adaptor s or and mains voltages e Plug the power adaptor in the DC terminal located on right side of the MEX 12 unit e Plug the power adaptor in power mains e Press and hold the ON key until you hear a double beep tones MEX 12 firmware version will be displayed on LCD for a few seconds followed by Source Device Family menu The unit is now turned ON and ready for operation Samsung CDMA Samsung TDMA Notes Using an improper or not corresponding to your local mains voltage power adaptor may cause a damage of the adapter and or MEX 12 unit The menu options of MEX 12 unit may vary with different firmware versions PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 5 of 19 3 Phone Book Exchange Between Mobile Devices 3 1 Source and Target Devices Selection Before phone book transferring source and target mobile devices should be selected as described below Scroll with up down keys of the Source Device Family menu and select by pressing gt key a device family that you are going to upload phone book from Samsung CDMA Samsung TDMA After a device family selected a Source Device menu will appear on the LCD Select a device of the family by pressing up
10. numbers are expected ag oer Prefix to change 3ttteees use to indicote how mony numbers are expected ag oy Prefixto change Nev Prefix Navr Profix 054 Cancel Ok Cancel Ok This example illustrates how the prefix 03 followed by a number of seven digits is replaced by the new prefix 054 A complete length of the number will be changed from nine to ten digits Number with the original prefix 03 9876543 Number with the modified prefix 054 9876543 5 10 Phone Book Opening and Saving Phone books are stored as MEX Base MXB files on computer Use the regular procedures in order to open or save the files by activating corresponding options in the File menu of the MEXBAT program 5 11 Phone Book Printing FPPun n umur asul prnpr Select a phone book you are going to print and activate the Print option in the File menu of MEXBAT programin rinasa ers order to print the phone book If no phone book was pim mm selected you will be prompted to enter user name or user SHPO ee phone number to identify a user whose phone book you are going to print Use Printer Properties and Print Preview options to setup a proper printing format PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 15 of 19 6 MEX 12 Unit Firmware Update Utility MEX 12 firmware is continuously developed to enable supporting of new m
11. obile Device Memory Exchanger User Manual Page 3 of 19 1 3 MEX 12 Physical Description MEX 12 is the standalone unit that is housed in a plastic handheld cabinet The unit has the following components listed below and marked on the picture Power ON OFF key Four menu navigation keys LCD display for menu and unit status indication Source Mobile Device terminal Target Mobile Device terminal Serial RS 232 terminal DC power supply terminal LCD Display RS 232 Serial Terminal Target Device Terminal Source Device Terminal Menu Power ON OFF Navigation Kavs Button PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 4 of 19 2 Preparation For Use 2 1 MEX 12 Set Content Please verify before you begin that the content of MEX 12 set contains the following items MEX 12 Mobile Device Memory Exchanger AC DC power supply adaptor A set of labeled cables for different mobile device families SIM card reader cable RS 232 serial cable CD containing ME XBAT Phone Book Handler Software User manual with a supported mobile device and supplied cables list Please report to your local PRAFTEC dealer in case you find some of the listed above items damaged or missing 2 2 Turning The Unit ON OFF MEX 12 is supplied with an AC DC 230 50Hz or 110 60Hz power adaptor Please follow the following instruction to power ON the unit e Verify that the power adaptor co
12. obile devices models and to improve the product MEX 12 firmware may be updated with a MEXUP Firmware Update Utility if you have MAXBAT v1 xx or with MEXBAT program v2 xx and its later versions those have the MEXUP utility integrated in the program Please contact your local PRAFTEC dealer if you wish to obtain a list of new supported devices and MEXUP Firmware Update CD with a latest firmware version MEXUP Firmware Update CD contains the following items MEXUP Firmware Update Utility MEXBAT Phone book Handler Software A new version of MEX 12 firmware a file as mx12 xxx mex A mx12 xxx txt file describing the x xx firmware version features and containing supported mobile devices list In order to update MEX 12 firmware please follow the following instruction e Install the MEXUP Utility on your PC refer mexup txt file for details or activate it by clicking on MEXUP menu of the MEXBAT program of v2 xx and later Connect MEX 12 to a COM port of the PC with RS 232 serial cable Make sure that MEX 12 unit is powered ON Run the MEXUP Utility and you will be prompted to select a COM port number Select the port number that is used to link the MEX 12 unit and PC Select the firmware file mx12 xxx mex and press Load button A progressing scale will indicate that the firmware loading is in progress it may take about 5 min e After the firmware loaded perform MEX 12 hardware reset by disconnecting and reap
13. on 1 1 MEX 12 General Description MEX 12 is a standalone unit allowing phone books exchange between cellular mobile devices by providing a smart data link between them And MEXBAT Phone Book Handler Software running on PC and communicating with the MEX 12 unit gives an easy way to modify to store and to print phone books of mobile devices The MEX 12 unit is useful for cellular mobile device sale and service centers to provide high quality services to users of a wide range of mobile terminals operating in different cellular networks as TDMA CDMA GSM AMPS Note The MEX 12 unit does not modify any NAM settings of mobile devices set by the mobile devices vendors or cellular network operators The operation of the MEX 12 unit is limited by memory areas of mobile devices allowed for modifying by users of the devices 1 2 MEX 12 Features e Standalone operation while phone books exchanging without need to use a PC e Supports a wide range of mobile terminals operating in different cellular networks as TDMA CDMA GSM AMPS e Supports direct operation with SIM cards used in GSM cellular networks e Phone book handling with MEXBAT program communicating with the MEX 12 unit e Possibility to update the unit s firmware supporting newer mobile terminals with MEXUP Firmware Update Utility via a serial RS 232 link e LCD and five keys Man Machine Interface allows simple and easy operation PRAF Microcomputer Technologies Ltd MEX 12 M
14. plying power to the unit Note If the loading process interrupted the MEX 12 will not function properly Please repeat and finish a firmware loading in case the process was interrupted by some reason PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 16 of 19 7 Troubleshooting 7 1 Common Troubleshooting Notes The most problems of data exchange between mobile devices are caused by improper interconnection of the devices or by incorrect functioning of the devices If an error has place the MEX 12 unit will notify you for that with the following messages Uploading Failed Check Cable XX lt Next Finish gt Loading Failed Check Cable XX lt Next Finish gt Data exchange errors may be caused by the following reasons e Amobile device is damaged or its battery is not charged nor functioning properly e Animproper or damaged AC DC adaptor is used to supply power to MEX 12 unit e Incorrect or damaged cables are used to interconnect devices You should check each cable in accordance with required cable number indicated on LCD and its actual number e A mobile device is not in a proper QWOFF state before starting data exchange You should check MEX 12 supported mobile devices list for a proper device state and turn each device in corresponding state neither ON or OFF before activation phone book transferring procedure e A mobile device is locked by a security code PIN Lock Code et
15. rks if mentioned herein are property of their respective owners Disclaims PRAF Microcomputer Technologies Ltd PRAFTEC continuously works in order to improve the MEX 12 system s performance and features This document and any system features including hardware and software of the product are subject to be changed without prior notice In no event shall PRAFTEC be liable to any party for any loss of profits loss of business loss of use of data interruption of business or for direct indirect special or exemplary incidental punitive or consequential damages of any kind in connection with this document or the information contained herein in connection with use of or deal with the product even if advised of the possibility of such loss or damage Warranty In the event that the product proves to be defective within a period of one year from a date of shipment PRAFTEC shell repair or change the product at its discretion and all possible delivery services expenses will be covered exclusively by dealer distributor or user of the product The warranty will be void for malfunctions caused by fire accident neglect abuse improper usage applying an improper electrical power attempt to repair the product by anyone other than PRAFTEC authorized personnel PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 18 of 19 praftec PRAF Microcomputer Technologies Ltd URL http www praftec com
16. t device with its corresponding cable or SIM card reader as described in paragraph 3 e As the following menu has appeared on the LCD activate data loading to the mobile device or to SIM from PC by selecting Load Data option of Mobile Device menu of the MEXBAT program lt Source Cable XX Target Cable XX gt lt STOP PC START gt The following messages on LCD will indicate that data loading is in progress and the process finishing MEXBAT Loading completed Press gt to Finish Repeat the data loading procedure if you wish to load data to the next device of the same model and press gt key in order to finish or to select another model of target device PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 12 of 19 5 5 Contact Data Record Modifying The following procedures should be performed in order to modify a contact data record Double click on a contact that you wish to modify or activate the Modify Contact option at Edit menu of the MEXBAT program The following window will appear allowing you to modify data of the contact amp Contact Information Contact Contact Name Natalie Bron General B85020182 Home as0227415 Mobile fas Work Po Fax Click OK button after all required data modifications have been performed or Cancel button if you wish to leave the contact record unchanged 5 6 Contact D
17. ternational roaming numbers are changed Activate the Change Prefixes option of the Contact List menu of MEXBAT program in order to modify phone number prefixes in a phone book The Prefixes window will appear allowing to define a prefix definition file you are going to create and or modify e Use Edit button to edit a prefix definition e Use Add button to add a prefix definition e Use Save button to save a prefix definition file e Use Apply button to apply changes to a selected definition file E Prefixes xi Please selectthe pretix definition file from the list aew prefix file gt Original Prefix New Prefix Add Eqit Delete pelte defntentnie Cancel Apply PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 14 of 19 By pressing the Edit button the Prefix Change Definition window will appear and you will prompted to enter original and new prefixes as described below e Enter an original prefix in the Prefix to change text box and follow this prefix by the number of asterisks that equal to the number of digits following the original prefix e Enter a new prefix in the New Prefix text box and confirm the prefix modifying by clicking OK button or cancel the session l f Prefix change definition lE f Prefix change definition Erlar the prefix to change Ener the prefix to change use to indicate haw mony
18. ure Please check MEX 12 supported mobile devices list for a proper device state and turn each device in corresponding state before activation phone book transferring procedure Mobile devices those are you going to exchange data between should be equipped with fully charged and properly functioning batteries PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 7 of 19 3 3 Data Exchange Between Mobile Devices In order to activate data exchange between two selected mobile devices press gt key The following messages will appear on LCD indicating that the data exchanging is in progress Source Device Data Uploading ill Device Data Loading Data exchanging completed lt Next Finish gt As soon as process will be finished you will be prompted to repeat or to finish data exchange Press gt key in order to finish Press lt key in order load the data to the next mobile device of the same model Important Note Remove battery of its compartment and insert it back in each mobile device after data exchanging and before its further use PRAF Microcomputer Technologies Ltd MEX 12 Mobile Device Memory Exchanger User Manual Page 8 of 19 4 SIM Card Handling Mobile devices operating in GSM networks use SIM Card Subscriber Identity Module that contains a subscriber s identification information and provides a data storage room for user data including its
Download Pdf Manuals
Related Search