ST 107 EMF DETECTOR
Contents
1. Search Monitoring Log view The device has a menu that allows for its configuration 5 1 1 Search Mode This mode is intended for detecting sources of electromagnetic radiation I n this mode the ST 107 receives radio signals detects them and outputs them to the built in display and as an audio signal to the earphones and the built in speaker The level of the signal is indicated on two 32 segment level meters on the display 2 Adjacent segments 9 light up to indicate the average value of the level of the 9 detected signal while a single lit up segment 7 shows its peak value aa r The ST 107 can measure current frequency values of the radio signal and DECT determine its most stable value for signals with a constant carrier frequency eo The ST 107 also displays the detection of GSM DECT Bluetooth and 802 11g BL TOOTH WLAN WiFi signals 1 The number of displayed Bands temporary indication of zero level of gauges 2 indicates the high pass filter is on 3 32 segment meter indicating the level of Channel 1 4 32 segment meter indicating the level of Channel 2 5 current absolute value of the zero level of Band 1 dB 6 current absolute value of the zero level of Band 2 dB 5 6 radio signal frequency 7 indicator the level of pulse power 8 type of detected signals 9 Indicator the level of integrated power 10 current range of level gauges 5 1 2 Monitoring Mode The Monitoring mode is intended for detecting2. updating the ST 107 again You can copy the downloaded updater application to any portable media and use it on another PC 8 Some limitations and recommendations 8 1 Use the original packaging for storing and transporting the ST 107 If you are not using the unit for a prolonged period of time keep it in a closed heated room with a temperature of 10 to 35 C 50 to 95 F and relative humidity of no more than 80 When transporting the unit in the original packaging take measures to prevent it from blows or excessive pressure 8 2 After the unit has been exposed to temperatures below 5 C 23 F for prolonged periods over 4 hours turn it on only after making sure there are no visible traces of condensation 8 3 When operating the unit try to protect it from concentrated moisture rain drizzle and snow Prevent the LCD from prolonged exposure to direct sunlight 9 Warranty information 9 1 The manufacturer guarantees that the ST 107 will comply with the specifications for a period of 12 months beginning from the day of purchase 9 2 The manufacturer will carry out repairs of the unit and its accessories or replace them if they malfunction or if the functioning will not comply with the stated specifications free of charge during the guarantee period 9 3 This warranty only covers free of charge repair or adjustment of faults that are not the result of improper use failure to follow the usage tips and recommenda
3. 1 on the display clicks with a frequency proportional to the level of the detected signal will be heard through the built in speaker and earphones The higher the signal level the more rapid the clicks you will hear The audio signaling is triggered as soon as the signal level reaches the fifth segment of the meter If you choose Aud you will hear an audio signal demodulated by the amplitude detector instead of clicks The default setting is Aud
4. Set relative level of ALARM increments Event sets the event to trigger Capture of Frequency Set Not set logging Signal GSM DECT BT WLAN log events when signals are Set Not set detected Display only Only the Alarm text will be Set Not set Alarm sets displayed type of alarm Alarm hold signaling ee Alarm indication remains onscreen Set Not set Not set before any key is pressed Sets time in hours 0 23 for Monitoring start time Seheduic Sets automatic turning on the Monitoring By default 9 hours jeer mode daily for a set period monitoring Monitori Its f h ae Not set schedule onitoring results for each sessions Monitoring end time are logged in TAN memory By default 17 hours Table 3 Protocol Default Defaut settings By time sorts events according to the time of occurrence Set Sorting sorts logged By level sorts events by signal level as displayed by the top Not set levents according to one meter in descending order of the parameters By CHANNEL sorts events by CHANNELs By duration sorts events by duration in descending order Erases all logged events A confirmation dialog Are you sure will be displayed Press SENS EXIT for yes or any other button to cancel the operation Erase all After all the events are erased the Logs are erased text will be displayed If you do not erase the logs manually the bank with the oldest information will be automatically erased t
5. When the antenna approaches a eavesdropping device depending on the band of signal the number of solid segments of one of the level gauges will increase When the signal level exceeds 32 dB the detector will display the value of the signal s detected frequency To determine the precise location of the eavesdropping device press ZERO to set the zero level to the current signal level and continue to scan the room Repeat this until you locate the offending device Change the sensitivity of the level gauges if necessary To attenuate interference from powerful radio transmitters in the range up 900 MHz base station of GSM and DECT we recommend engaging the low pass filter 6 5 MONITORING mode To select the Monitoring mode press Mode see 6 1 2 2 Monitor Start will be displayed and a five second countdown will begin This period is intended for measuring the background level against which the ST 107 will compare all subsequent measurements 6 5 1 Controls Use Menu to adjust the settings for this mode In this mode the following conditions are always true the range of the level gauges is 0 to 55 dB the ZERO and SENS are disabled 6 5 2 Usage Adjust the settings in the Menu if necessary Place the ST 107 in the area where the presence of eavesdropping devices is suspected If the alarm conditions are met Alarm will be displayed The ST 007 logs events of each monitoring session to a separate memory
6. ST 107 EMF DETECTOR TECHNICAL DESCRIPTION AND USER S GUIDE 1 Introduction This User s Guide contains information necessary for the setup and operation of the ST 107 EMF RF Detector Before operating your ST 107 read this User s Guide carefully and consult it every time you have questions about the operation of the EMF Detector The information in this User s Guide is subject to change without prior notice The manufacturer has a right to change the product s specifications in such a manner that they do not worsen or reduce the product s functionality 2 Purpose The ST107 EMF electromagnetic field Detector is designed to detect and locate the sources of electromagnetic radiation from devices intended for the unauthorized obtaining of information eavesdropping devices such as radio microphones telephone radio transmitters radio stethoscopes hidden video cameras equipped with a radio channel for transmitting information radio beacons for tracking moving objects people vehicles freights etc unauthorized use of GSM and DECT cellular phones unauthorized use of Bluetooth and 802 11g WLAN WiFi The ST 107 will operate in accordance with its specifications if the battery voltage is no lower than 1 1 V Operating temperature 10 to 35 C 14 to 95 F Relative humidity up to 95 noncondensing Operating the device at temperatures below 5 C 23 F will slow down the outpu
7. bank The total number of memory banks is 9 Bank 1 always contains the most recent events bank 9 has the oldest events When all the memory banks are full the events in bank 9 are deleted to make room for new events The maximum number of events in one memory bank is 999 The total number of events that the ST 007 can hold is 4 096 The minimum time between two events of the same type is 1 seconds Such events will be logged in the protocol as two separate records If a second event of the same type is detected within 1 seconds the ST 107 will not log it as a separate event Instead the duration of the previous even will be extended 6 6 LOG VIEW mode If the log has no events Log Empty will be displayed 6 6 1 Controls To browse the events use the VOL VOL buttons The events are numbered according to the sort order set via the Menu To switch between the banks press SENS EXIT The bank with the latest information will always be bank Noe1 If you choose sorting order other than by time in the Menu you may also see the following text Sorting Please wait Pressing MENU will display the information about the cause of the event in the following format 1 level XX dB 2 DECT GSM Bluetooth 802 11 3 Captured frequency or frequency change XXXX XX MHz Only the fields that indicate the cause of the event are displayed To exit the mode press SENS EXIT 6 7 Working with Menu The Menu is used to change the fac
8. efore connecting the ST 107 to the computer install the software from the Mini CD or download the latest version from the Internet at www smersh ru manual st107 Connect the ST 107 to the computer with the USB cable When prompted to install the device driver choose the installation path Confirm the installation by agreeing with the prompt 7 1 ST 107 PC DATA Software The software is intended to display real time data and the results of operation of the ST 107 load and display textual and graphical information of the operation of the ST 107 in Monitoring Mode Event Log operate the device remotely from the PC The complete manual on the ST 107 PC DATA software is included on the Mini CD 7 2 Downloading firmware updates from the Internet Navigate your web browser to http Awww spymarket com manual st107 shtml WARNING The following steps for updating the firmware in the ST 107 are true for Microsoft Internet Explorer The procedures for other web browsers may be different from those described below Click the appropriate firmware version You will be presented with the following prompt Would you like to open the file or save it to your computer Choose Open and within a few seconds the application will be downloaded and launched Connect the ST 107 to a free USB ports of your PC Press PWR MODE Monitor the updating process on your computer display If this process fails the application will offer you to attempt
9. exceeds the set threshold level the event is logged in the protocol set via the menu 5 1 3 Protocol View mode The Protocol View mode is intended for viewing the log of events stored in the ST 107 s NVRAM during Monitoring 2 3 Events can be sorted by time duration signal level frequency value 1 memory bank number 1 9 2 current event number 001 999 3 total number of events in the bank 001 999 4 event duration hours minutes max 99 59 5 event beginning time hours minutes 6 date of the event day and month 7 threshold level markers 8 signal type DECT GSM Bluetooth 802 11 9 signal levels of the event 5 1 4 Menu Custom settings The ST 107 can be custom configured through the menu if you choose to override factory defaults 5 2 Description of the box contents 5 2 1 ST 007 EMF Detector The ST 007 EMF Detector is a small form factor box On the front panel of the detector a graphical display and six button thin film keypad The top of the detector has a ports for connecting a UHF and SHF antennas The left side of the detector has a 3 5 mm earphones jack and USB port The back of the detector has a sticker with information about the manufacturer model and serial number 5 3 Packaging The ST 107 and its accessories are shipped in a box made of corrugated cardboard with the dimensions of 170 x 150 x 60 mm 6 7 x 6 x 2 4 in For convenience as well as to prevent the
10. external power supply It is safe for the data and settings to leave the device out of power for extended periods of time All information is stored in the device s NVRAM and will not be lost if the device loses power or the battery runs out in the middle of operation 6 2 1 Charging the Battery Connect the charger to the USB port on the ST 107 Connect the charger to an 220 V electric outlet Battery Charging will appear on the display When the battery is fully charged the display will indicate Battery Charged It takes approximately 2 5 hours to charge the battery to 100 per cent If the device operates from the power supply or whenever it is connected to a powered USB port on the computer the battery will be charging automatically In this mode it will take approximately 12 hours to completely charge the battery When the battery is fully charged and the detector continues to operated from the power supply pictogram 1 will disappear from the display 6 3 Preparing ST 107 for operation connect the UHF and SHF optionally antennas to the detector unit turn the detector on by pressing MODE When the unit powers up it automatically enters the SEARCH mode if the text Battery Discharged appears on the display you will need to charge it set the time on the detector s internal clock For more information on setting the time see 6 7 6 4 SEARSH mode 6 4 1 Controls Operating the detector using
11. f If scheduling was set up for the Monitoring mode the display will show pictogram 4 and the current time 6 When in the Search mode the detector will turn off automatically depending on the idle time value set i e time after the last key has been pressed in the Menu The ST 107 will not turn off automatically if used with the power supply 6 1 2 2 Control buttons explained Secondary function Main function Used for setting the detector via Menu Chooses Search Monitoring and turns the detector on and off EWIMOBE SEARCH Mode gt Power off gt MONITORING mode gt Power off Sets indication threshold level in SEARCH Up one menu level ZERO mode Sets sensitivity level for display gauges Exit from the menu es Adjusts volume Moves up and down in the menu MENU ENTER Enter in MENU Confirms selection 6 1 2 3 Volume control Pressing the Vol and Vol buttons adjust the volume and indicates its level on pictogram 3 6 2 Power supply The ST 107 can be powered by a built in Li Pol Battery external charger power supply included USB port of PC When the batter discharges to the minimum battery level the indicator 1 Fig 3 will turn from solid to outline and will be begin blinking Average battery operation time of no less than 8 hours To extend the built in battery life we recommend avoiding the situation when it is completely discharged In Monitoring Mode we recommend using the detector with the
12. o make room for new events Table 4 System settings Display Description Battery empty sound Repeated sound signals accompanying Battery Empty text on the screen Button pressed sound Sound confirming that a button is pressed Backlight Turns display backlighting on Backlight brightness Adjusts backlight brightness Timer Contrast Sets display contrast Language Date Time Sets date and time PC sync Automatically synchronizes with the clock ona PC during data transfer Correction Sets daily clock correction Factory defaults Table 5 Channel channel 1 Set Not set channel 2 Set Not set choice of displayed channels Channel On Off Filter Choice of a priority between measurements of frequency and Freqmeter identification of signals Set Not set From 01 to 05 with increments of 01 Value Default settings 10 to 100 with 10 increments Sets time for automatic turning off of backlighting after a period 24 sec of inactivity 8 sec to 2 min with 8 sec increments 10 to 100 with 10 50 increments English Russian Hours h minutes m seconds s day d and month M are set separately Set by user Press Enter to modify the next parameter Set Not set Set from 2 to 2 min with an 00 00 accuracy of 1 sec per day Reverts ALL the settings of the detector to their factory defaults Default settings Not set 7 Working with the Computer B
13. sliding of the contents the detector and its accessories are placed in a specially molded styrofoam insert 6 Operating the ST 107 WARNING This User s Guide describes the principles of operating the ST 107 It is not intended as a comprehensive reference for detecting eavesdropping devices 6 1 Display and controls 6 1 1 Display The results of are indicated a four line LCD with a resolution of 97 x 36 pixels as digits and text as well as additional pictograms at the top of the display Fig 3 shows the elements of the display typical for all the modes of operation 1 battery level AC SEARCH 2 indicates that data is transmitted through the USB port MONITOR 3 volume level 4 indicates that scheduling is on for the Monitoring mode 5 real time clock hours minutes 6 indicates that audio signaling is off 7 operation mode status L Log View mode 6 1 2 Controls The ST 107 is controlled from a six button thin film keypad 6 1 2 1 Turning the detector on and off To turn the ST 107 on press lt MODE gt The following will temporarily appear on the display SmerSH Technics Russia 2009 Ver X X www spymarket com where X X is the detector s firmware version number By default after powering on the ST 107 enters the lt SEARSH gt mode To turn the detector off manually press lt MODE gt Power off will be displayed for three seconds after which the ST 107 will turn of
14. sources of electromagnetic radiation and storing data in NVRAM The maximum number of events that can be stored in NVRAM is 4 096 The events can be viewed when the detector is in the Log View mode The Monitoring mode has an extended range of alarm signals which can be triggered if the signal passes a certain level or frequency threshold or if a certain type of signal is detected GSM DECT Bluetooth 802 11 It is possible for the user to schedule the ST 007 to turn on and off This mode has two basic operations 5 1 2 1 User controlled operation The ST 007 is placed so that it is visible to the user This is useful for detecting devices for the unauthorized obtaining of information among the visitors of an office for example 49 9 1 2 2 Autonomous operation The ST 007 is placed in an area where the use of eavesdropping devices is suspected and the electromagnetic environment will be monitored during a pre programmed period without user interference 1 3 indicators the level of integrated power in the 1 and 2 Channels 2 4 threshold level markers of integrated power when the level exceeds the set threshold level the event is logged in the protocol set via the menu 5 type of detected signal DECT GSM Bluetooth and 802 11 and signal frequency in the XXXX XX MHz format 6 7 indicators the level of pulse power in the first and in the second frequency range 8 9 threshold level markers of pulse power when the level
15. t of data to the display WARNING The output amplifier of the ST 107 may be damaged by high voltage from static electricity which may accumulate on synthetic clothing floor carpets etc sources of high power electromagnetic interference in the vicinity of the ST 107 3 Specifications Frequency range MHz 50 7000 Channel 1 MHz 50 2500 channel 2 MHz with SHF antenna 2500 7000 Frequency range 1 75 50MHz Threshold Input sensitivity dBm 70 1500MHz 50 2500MHz 55 50 2000MHz Display dynamic range db 40 pace cae 35 500MHz 40 1500MHz 20 2500MHz Frequency measurement error 0 005 Low pass filter cutoff frequency MHz 750 Frequency range 2 Threshold Input sensitivity W cm2 2 9 10 10 Dynamic range db 45 Frequency meter sensitivity dBm Power supply V 3 6V internal Li pol battery 5 external power supply charger Current consumption mA lt 80 Dimensions Prime Unit without antennas mm 85x53x19 Dimension SHF antenna D 16 L 72 Weight Prime Unit without antennas kg 0 15 4 ST 107 box content 1 ST 107 EMF Detector Unit 2 UHF antenna 3 Charge Power supply 4 Cable USB 5 Mini CD 6 This User s Guide 7 SHF antenna optional 5 Operating principles and brief reference The ST 107 utilizes the principles of wideband detection of electric fields 5 1 Operating modes The ST 007 operates in three main modes
16. the keypad To set the indication threshold of the signal compared to the current level of the radio signal press ZERO once The display will temporarily indicate Zero all the gauges will be cleared and the current level of the signals in dB will be displayed in 5 BAND 1 and 6 BAND 2 After each subsequent setting of the threshold level the scale of the gauges will change according to the remainder For example if the absolute value of the zero level is 24 dB the entire meter will be linear in the range between 24 dB and 56 dB 1 dB per segment if the absolute value of the zero level is 8 dB the entire meter will be linear in the range between 8 dB and 56 dB 1 5 dB per segment etc To set the indication threshold of the signal with zeroing the values in 5 and 6 press ZERO when you see Zero displayed Setting the sensitivity of level gauges Press SENS sequentially to cycle through the available sensitivity levels The selected value will be displayed in 10 L low sensitivity level the entire meter spans out 55 dB M medium sensitivity level the entire meter spans out 35 dB L high sensitivity level the entire meter spans out 15 dB 6 4 2 Usage Set the indication level threshold You cannot set the threshold when in the room to be scanned If eavesdropping devices are already present and operating in the room their radiation level will be considered the zero level by the detector
17. tions stated in the User s Guide improper storage or shipment and mechanical damage to the unit or its parts The warranty will only be ensured with a guarantee claim accompanied by a properly filled out certificate of warranty 9 4 The warranty is granted for every unit only if the purchaser provides a certificate of warranty filled out by the manufacturer and the seller 9 5 The manufacturer offers post guarantee servicing of the ST 107 SmerSH Technics grants its official dealers the right to establish additional warranty periods 10 Quality control certificate The ST 107 EMF detector S N has passed Q C Manufacture date Certificate of warranty 1 For warranty repair servicing of the ST 007 EFM Detector S N___ Manufacture date__ Manufacturer Sold name of the dealership or trade organization Date Sales representative signature Seller Certificate of warranty 1 tear off part For warranty repair servicing of the ST 007 EFM Detector S N__ accepted __ service technician name and signature Toggles the low pass filter on and off in Search mode Enters the Protocol View mode Engaging disengaging the low pass filter To toggle the low pass filter on and off press and hold Sens UHF for more than two seconds The state of the mode will be reflected in 10 The default state is OFF Choosing audio signaling type To choose between two types of audio signaling press Sound Prt When you choose Tone see
18. tory default settings of the ST 107 to suit your particular needs To enter the Menu press MENU ENTER Four options are available under Menu MONITOR settings for the Monitor mode see Table 2 LOG settings for the Log View mode see Table 3 SYSTEM general system settings such as backlight time language etc see Table 4 CHANNEL choice of displayed channels 1 or 2 or 1 2 and set of Filter Use VOL and VOL buttons to highlight a menu To choose a menu press MENU ENTER To go up one level press ZERO Press SENS EXIT to exit the menu Table 1 Search Set level sets level at which the frequency meter will turn on depending on the level of the upper meter 0 to 64 dB with 1 dB increments 0 dB always on 64 dB always off Having the frequency meter off increases the battery life Capture level sets stable level of signal frequency for display 0 1 to 1 with 0 1 increments Frequency meter AOR model chooses type of scanning device to transmit AR 8000 frequency data AR 800 AR 8200 AR 5000 Averaging sets averaging time 0 1 to 6 sec with 0 1 increments Diff mode Scale sets scale for level meters 20 to 100 for the entire meter with 10 increments Switch off time sets time for automatic switch off of the detector Timer in the Search mode after the last keystroke 8 sec to 34 min with 8 sec increments Only when operating from the battery Table 2 Monitoring 1 to 64 dB with 1 dB
Download Pdf Manuals
Related Search