HE-205 Remote Bulb Holder
Contents
1. Dimming Receiver Sockets 1 Using a paired remote control Press the On button and press On again The unit will start the dimming cycle Never exceed 100W maximum load 2 To set the receiver socket at the required level press the On Button press Off to switch the receiver off Product Specification Receiver Module HE 205 Input 230V 50Hz Range 30 Metres Open Distance Max Load 100W Incandescent Frequency 433 92MHz Indoor Use Only Warning Never Exceed the Product Specification Contact Helpline 0845 2301 231 C H Byron Tel 0845 2301231 34 Sherwood Rd Fax 01527 557701 Aston Fields Web www chbyron com a n Bromsgrove E mail KA 4 B60 3DR support chbyron com ETA A A LT CH2. HE 205 Remote Bulb Holder RE INVENTING THE HOME The HE 205 Remote Bulb Holder converts your Standard ceiling rose or lamp into a wire free unit Never exceed the product specification 100W Max Incandescent Range 30 Metres Indoor Use Only Pairing Deleting with Remote Control Up to Six remote controls can be paired with each Bulb holder To program the bulb holder insert the unit into a compatible ceiling rose or lamp and switch on the power now press Learn button The LED will start to flash now press the selected ON button on the remote control additional product the LED will stop flashing The units are now paired together you can test this by pressing the selected On Off button Learn Always refer to the original instruction when using with additional products V1 0 Deleting Remote Control To delete a remote control that has been paired with a HE 205 Bulb Holder simply press Learn button The LED will start to blink press the Off button on the remote control the LED will blink twice to confirm that the remote control has been removed from the Bulb Holders memory Remote Socket reset To delete all the remote control units from the memory of the Bulb Holder hold the Learn button for more than 6 seconds the LED will start to blink continuously Press and hold the learn button again the LED will blink twice to confirm that all paired remote controls are deleted form the receiver memory
Download Pdf Manuals
Related Search