Home

TV-IP262PI - Ingram Micro

1. Select the destination that the captured images will be sent to Record to SD Card Record to Network Storage Send Email FTP Upload or Instant Message Copyright 2012 TRENDnet All Rights Reserved 2 TRENDnet User s Guide TV IP262PI Tools The Tools menu provides the commands that allow you to restart or reset the camera You can also backup and restore your configuration and upgrade the firmware for the camera TRENDnet Megapixel PoE Dome Day Night Internet Camera TV4P262PI Location 20124104 050242 Tar Live View System Tools Tools QO Setup Smart Wizard Basic Network Video Audio Event Server Motion Detect Event Config Tools SD C rd Device Info Copyright 2012 TRENDnet All Rights Reserved e Factory Reset Click Reset to restore all factory default settings for the camera e System Reboot Click Reboot to restart the camera just like turning the device off and on The configuration of the camera will be retained after rebooting e Configuration You can save your camera configuration as a backup file on your computer Whenever you want to resume the original settings you can restore them by retrieving the backup file Backup Click Get the backup file to save the current configuration of the camera Restore Click Browse to locate the backup file and then click Restore Copyright 2012 TRENDnet All Rights Reserved e Update Firmware You can u
2. A PARTICULAR PURPOSE TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE OR USE OF TRENDNET S PRODUCTS TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY CUSTOMER S OR ANY THIRD PERSON S MISUSE NEGLECT IMIPROPER INSTALLATION OR TESTING UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE OR BY ACCIDENT FIRE LIGHTNING OR OTHER HAZARD LIMITATION OF LIABILITY TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY WHETHER BASED IN CONTRACT OR TORT INCLUDING NEGLIGENCE FOR INCIDENTAL CONSEQUENTIAL INDIRECT SPECIAL OR PUNITIVE DAMAGES OF ANY KIND OR FOR LOSS OF REVENUE OR PROFITS LOSS OF BUSINESS LOSS OF INFORMATION OR DATE OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE USE PERFORMANCE FAILURE OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES AND LIMITS ITS LIABILITY TO REPAIR REPLACEMENT OR REFUND OF THE PURCHASE PRICE PAID AT TRENDNET S OPTION THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE Governing Law This Limited Warranty shall be governed by the laws of the state of California Some
3. Delete Since you click Upload the preview image area is displayed with white dotted line Click Enable and set the transparency setting by whether selecting the Transparent option or not When done click Apply You can see the image overlay on the live view image when you click Live View The width and height of the input overlay graphic should be multiple of 4 at a maximum size of 43690 pixels and in JPG or BMP 24 bit RGB format e Privacy Mask This item allows you to configure up to two mask areas Select the area 1 or 2 from the Window pull down list and then click Enable You can change the size and position of the area by holding and dragging the mouse You can also change the color of the mask area by clicking the Color box and then selecting the color you want When done click Apply You can see the mask area s on the live view image when you click Live View Video amp Audio gt gt Overlay Mask gt gt Text Overlay This page is used to set the text overlay feature of the camera including the following three options date amp time heading text and background transparency setting e Include Date amp Time Select this option to display the date amp time information on the live view image e Include Text Select this option and enter your heading text in the box to display the text information on the live view image e Enable Opaque Select this option to display the overlay text with a background
4. E E 30 How to setup access the camera behind a Router ccsscsssssscssenees 31 Technical SpecificatiONs cccsccccsceccccecccccsccccccccsceccececscececcccecscesess 34 Copyright 2012 TRENDnet All Rights Reserved Troubleshooting TRENDnet User s Guide TV IP262PI Product Overview TV IP262PI Package Contents e TV IP262PI e Multi Language Quick Installation Guide e CD ROM Utility amp User s Guide e Network cable 1 5m 5ft e Power adapter 12V DC 1 5A e Camera mounting kit If any package contents are missing or damaged please contact the retail store online retailer or reseller distributor that the item was purchased Copyright 2012 TRENDnet All Rights Reserved Features The Megapixel PoE Dome Internet Camera with IR model TV IP262PI is an indoor enterprise class surveillance camera capable of transmitting H 264 video at up to 1280 x 1024 resolution View and manage the tamper resistant dome IP camera from any computer with an internet connection Manually pan the camera side to side350 degrees and tilt it up and down 70 degrees to fix its final viewing position No need to install this camera near a power source power and data are received through a single Ethernet cable using Power over Ethernet PoE technology View this camera on your mobile device with TRENDnet s free mobile App Manage up to 32 TRENDnet cameras with the included complimentary camera managemen
5. a range of IP addresses that are allowed to access the camera by entering the Start IP address and End IP address options When you are finished click Add to save the range setting You can repeat the action to assign multiple ranges for the camera For example when you enter 192 168 0 50 in Start IP Address and 192 168 0 80 in End IP Address the user whose IP address located within 192 168 0 50 192 168 0 80 will be allowed to access the camera Event Server Motion Oetect aa Event Contig Tools SO Card Dowco Info Copyright F012 THE Niet As agite Reeorwed IPv6 Enter the IP Address that is allowed to access the camera Deny IPv4 Assign a range of IP addresses that are blocked to access the camera by entering the Start IP address and End IP address options When you are Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP262PI Video amp Audio gt gt Camera AE Control Select AE Auto Exposure speed as Fast Normal or Slow Frequency AE Control Day Time AE Control Night Time min shutter speed min shutter speed 1 120s 1 60s 1 30s 1 120s 1 60s 1 30s VGA 1 100s 1 50s 1 25s 1 100s 1 50s 1 25s TRENDNET Megapixel PoE Dome Day Night Internet Camera TV4P262P Locatoe MUU ota Video amp Audio Camera Smart Wizard Banse 1 120s 1 60s 1 15s 1 120s 1 60s 1 15s 1 100s 1 50s 1 12 5s 1 100s 1 50s 1 12 5s Video amp Audio gt gt Video Video am
6. change To find the Camera s current IP address and to access it locally click on the Camera Finder button on the home menu Mobile App Visit www trendnet com Apo to find the App that works with your mobile device Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP262PI Starting Camera Finder The camera comes with a conveniently utility IPSetup which is included in the 2 Click the Camera Finder IPSetup from the Auto Run menu screen Then the Installation CD ROM allowing you to search the camera on your network easily IPSetup Wizard will appear Click Install to install the utility 1 Insert the Installation CD ROM into your computer s CD ROM drive to initiate Setup IPSetup x the Auto Run program Ready to Install bay Setup is now ready to begin installing IPSetup on your computer amp Click Install to continue with the installation Install Camera Camera Finder IPSetup Install SecurView Pro Quick Installation Guide User s Guide Product Registration 3 Megapixel PoE Day Night Exit Dome Internet Camera TV IP262Pl Completing the IPSetup Setup Wizard Setup has finished installing IPSetup on your computer The application may be launched by selecting the installed icons Click Finish to exit Setup Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP262PI 4 After installing the IPSetup
7. files to users 24 TRENDnet User s Guide TV IP262PI Path Assign the path for uploading the files on the Network Storage server For example Test User Name Enter the user name to login into the Network Storage server Password Enter the password to login into the Network Storage server Split By When the file is too large to upload smoothly use this option to split it by selecting File Size or Recording Time When Storage Full Select Stop Recording or Recycle Delete Oldest Folder when the storage space on the Network Storage server is full Encode Format Select MPEG4 or H 264 as the encode format while recording File Format Select MP4 or AVI as the file format while recording Event Server Setting gt gt Instant Message Event Server Setting Instant Message test gmal com Jabber Password 7 Enable Jabber Server Address talk google com 5222 V Enable Encrypt Authentication Enable trendtest gmail com Camera event detected ee Mc Instant Message Manually Specify Server Host Port E mese orones OOO O Ol o 4 The camera supports the Jabber IM service so that you can send an instant message once you have a Jabber account For more information of Jabber please visit the Jabber Website at http jabber org Main Page The information shows above is using google talk e Instant Message Jabber ID Enter your user ID to login into the Jabber IM service Jabber Pas
8. standard enabling the camera to be powered by the Ethernet e Mic In Connect an external microphone e Line Out Connects an external active speaker Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP262PI Application Diagram Inside Component Unscrew four screws to disassemble the Dome cover 00004 S Lens assembly with the adjustable base LED indicators LED indicators Power Indicate the camera is powered on with the steady amber light Mobile Phone Link Indicate the camera s network connectivity with the flashing green light Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP262PI Installation Hardware Installation The camera can be mounted to the ceiling surface directly by following the steps below 1 Remove the Dome cover by unscrewing the four screws lt a 2 Use the included drill template to drill three mounting holes on the desire location and hammer the plastic anchors into the holes Drill Template Mounting Hole Mounting Hole Front Vv Mounting Hole Copyright 2012 TRENDnet All Rights Reserved 3 Secured the camera to the location with three screws 4 Before put the Dome cover back adjust the lens assembly by the following steps Tilt the camera lens to a proper position by losing the screws and then swinging the adjustable base Rotate the came
9. 20618 mp4 fA 120651 mp4 SD Card Setting When Storage Full Stop Recording 9 Recycle Delete Oldest Folder Encode Format I MPEG4 H264 H 120715 mp4 AVI e SD Card Dismount Click Dismount to safely remove the SD card that is installed in the camera e SD Card Information Displays the information of the installed SD card including the Total space and Free space e SD Card Setting When Storage Full Select Stop Recording or Recycle Delete Oldest Folder when the storage space on the SD card is full Encode Format Select MPEG4 or H 264 as the encode format while recording File Format Select MP4 or AVI as the file format while recording Copyright 2012 TRENDnet All Rights Reserved 29 TRENDnet User s Guide TV IP262PI Information gt gt Device Info Device Info Display the Basic Video amp Audio and Network settings of the camera The Information menu displays the current configuration and events log of the camera System Information Device Information TRENDNET Smart Wizard Basic Watwark idan Audit Event Saryar Wotan Deabact Event Contig a Tools D Gard Devica Inta Teana anag System Information Device Information Lect Emann coe HIA i MS hein NUPE ate ETT Enable Mrcphons in Tpm E Moca M iira MA uba Wak D iy Prrwry DHS Adr saxcodary OMS wii mA Fedde ed Caray MAT Back ec rm
10. Device Info Copyright 2012 TRENDnet All Rights Reserved Schedule Profile Event Configuration gt gt General Setting Event Configuration General Setting Delete Thu Fri Sat General Snapshot Recording Filename Prefix Weekdays 8 Sun Mon Tue Wed Time List 20 sec s Network Storage Recording Time Per Event Add Copy this to all weekdays Delete Delete this from all weekdays oo s General O TTT E e Copyright 2012 TRENDnet All Rights Reserved 26 TRENDnet User s Guide TV IP262PI Profile Name Display the profile name that you select in the Schedule Event Configuration gt gt Schedule Trigger Profiles list Weekdays Select the weekday s that you want to separately assign in the schedule profile The weekday that has been assigned will be displayed with green color Time List Display the time period that you have assigned within the selected weekday To assign the same time period to every weekday click Add this to all weekdays click Delete this from all weekdays to remove the selected time period from every weekday Click Delete to remove the selected time period Start End Time Enter the start and end time and then click Add to assign a time period within in the selected weekday Event Configuration Schedule Trigger BHH mr el lt IE y E m always v Schedule Profile w sec s Network Storage Schedule alw
11. TRENDnet products include software code written by third party developers These codes are subject to the GNU General Public License GPL or GNU Lesser General Public License LGPL 38 TRENDnet User s Guide Limited Warranty Go to http www trendnet com gpl or http www trendnet com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers TRENDnet does not provide technical support for these codes Please go to http www gnu org licenses gpl txt or http www gnu org licenses Igpl txt for specific terms of each license Copyright 2012 TRENDnet All Rights Reserved 39 TRENDNET Product Warranty Registration Please take a moment to register your product online Go to TRENDnet s website at http www trendnet com register TRENDnet 20675 Manhattan Place Torrance CA 90501 USA Copyright 2012 All Rights Reserved TRENDnet
12. The camera supports UPnP Universal Plug and Play which is a set of computer network protocols that enable the device to device interoperability In addition it supports port auto mapping function so that you can access the camera if it is behind an NAT router or firewall Select the Enable option to enable this feature e UPnP Port Forwarding select this option to have the port forward to router e Ports Number HTTP Port The default HTTP port is 80 RTSP Port Configure the transmission of streaming data within the network The default RTSP Real Time Streaming Protocol port is 554 NOTE If the camera is behind an NAT router of firewall the suggested to be used is from 1024 to 65535 17 TRENDnet User s Guide TV IP262PI Network gt gt Advanced e RTSP an 2 oO gt a lt O z O D a RTSP Streaming The camera supports three levels of RTSP access The default RTSP Port is 554 username password required a a Username password are transmitted in plain text m o m 2 BIL 5 o Cc default 443 RTSP link prompts for authentication Username password are encrypted during data transmission Authentication Disable v RTSP Port 554 default 554 TRENDnet recommends using RSTP Digest authentication method Disable and Basic methods pose security risks Please verify if your RTSP client MN n n o oO RTSP Streaming Multicast settings 1234 de
13. _ TRENDnet Megapixel PoE Day Night Dome Internet Camera TV IP262PI TRENDnet User s Guide Table of Contents Contents Product OV GIVI CW sissieimiieresresi enini EE EE 2 Package COn ENTS eae eres esen veda E E EEEO EO E 2 FS AER A A A AO O A A EAE O E A 2 Product Hardware Features ccsscccccccssssssccccssneessscecccseueseececesseussccesseueessesseessuauaseeess 3 Application Diagram ccccccccccccsecessescecececccecceesesaauauseesseseccesaeaaeaeaseseeeeceeseeeeeeeeesaaeeses 4 HAST ANA tI OND E E E E E 5 Hardware Imetallatio Moreserpinicirinrinriein anirien on EEE EE EE EEAS 5 Camera InstallatiO Neersen ia E EE TEEDE E EE E 6 Starting Camera Finder s ssesesseseesesoecsssesoecesoesosoecessecssssceseecssesoescese 9 ROTTS UAE ON ssssssssicsiciiincsacrnencd riae aada 11 Viewing Camera Basic Function ssssssssssesssrsseesrsssrresrrereesrreseeesreeseesreeereseresrreereseesse 11 Configuring the Camera SOUUNG vcssinceciccdesssasncetnccvisvaicanpeGorsteaanadonsdevencsouecaoriswnsbosdedeoanvnes 12 SULAT EEE N E E E E A T 13 BAS UG A ETE EE P A E A N E E E E 14 TSIEN E A EE EE EE E EE A E T E A E A E 16 ilo ECE EA To Cantante tte E E E E E E A E A E E 19 S SC E E E ee ce swine renee og se soe A E eee eee 22 IVT OW CUCU sraa aed sa E 25 Eve gy CON E ene een nner een ee ae eee eee eee eee ee 26 TOO EAO EE A E A P EA E E E E E T 28 SPE o A E ETA E E ces E E T ene ne E T 28 B a a e PA E A E E
14. a Uar Eevee HI IF Pest BIS Pest ani i Copyright 2012 TRENDnet All Rights Reserved Megapixel PoE Day Night Dome Internet Camera TWAIPES2PI Locca W AE Doprigi E HF THEA Oine All boha Reserved Basic TV IP262P kosati Video amp Audio MWJPEG Resolution SAGA Network DHOR 92 168 10 30 92 168 10 1 r o address IPv Address Address Pub Address m 214 d ff fef3 6F31 o E O 0 00 Copyright 2012 TRENDnet All Fights Reserved Information gt gt System Log The Logs table displays the events log recorded by the system System Information Logs Refresh 30 TRENDnet User s Guide How to setup access the camera behind a Router You can either setup the Dynamic DNS connection via camera itself or your home router An account from any of the listed DDNS providers is required prior to this operation Configure DDNS on your Camera 1 Go to Camera s DDNS Setting page click Enable to activate the feature Then select a DDNS provider from the list DDNS Setting Fl Enable Provider www dyndns com www dyndns com members easydns com web easydns com www EuroDynDNS org Host Name User Name Password Enter your DDNS s the Host Name User Name and Password Pein oe Enable Provider www dyndns com Host Name trendnet dyndns org User Name trendnet Password seeceseeseeeeee el Mc default 80 In the Port Numb
15. ard will guide you through the necessary settings with detailed instructions on each step User Name Password EE N Bec To start the wizard click Smart Wizard in the left menu bar e Camera Setting By default the camera name is set as model number Change the name if _ e Email Settings necessary Enter the location and administrator password twice Enter the required information to be able to send email with image TRENDnet ea For example myserver com If you are using a free mail service e g Google Location 20120104 004040 Gmail Yahoo Hotmail please enter the SMTP server address and the Camera Setting corresponding information from the service provider This wizard will help you quickly set up the Network Camera to run on your network saat Location Email Setting Camera Name Enter a descriptive name Admin Password for the camera For example camera 1 Location Enter a descriptive name for the meeting room 1 SMTP Server Address myserver com n Port Number This server requires an encrypted connection SSL Admin PasswordConfirm Password Enter the administrator password twice to set and confirm the password to access the camera s Configuration Utility Copyright 2012 TRENDnet All Rights Reserved STARTTLS john smith myserver com Sender Email Address None SMTP e IP Setting Sender User Name Select the IP setting according to you
16. ate and time for the system TimeZone Select the proper time zone for the region from the pull down menu Automatically adjust clock for daylight saving time changes select this option for daylight saving Synchronize with PC Select this option and the date amp time settings of the camera will be synchronized with the connected computer Copyright 2012 TRENDnet All Rights Reserved Synchronize with NTP Server Select this option and the time will be synchronized with the NTP Server You need to enter the IP address of the server and select the update interval in the following two boxes Manual Select this option to set the Date and Time manually Basic gt gt User Basic User User Accounts Administrator Password Confirm Password Mod General User User Name Password Add Modify UserList v Delete User Name Password Add Modify UserList Delete Direct Video Stream __ Enable A Authentication Apply e Administrator To prevent unauthorized access to the camera s Web Configuration you are strongly recommend to change the default administrator password Type the administrator password twice to set and confirm the password e General User User Name Enter the user s name you want to add to use the camera Password Enter the password for the new user When you are finished click Add Modify to add the new user to the camera To modify the user s information select the one you wan
17. ays v Event Configuration gt gt Motion Detect Trigger w E A S J Event Configuration Motion Detect Trigger Motion Detect Trigger Please set the corresponding server setting first ae a You can separately configure the schedule for trigger function of the camera by Schedule Profile Email FTP or Network Storage Select the Enable option on each item and then ee eee select a Schedule Profile from the pull down list and set the Interval time AB i ae aac aa NOTE If the setting value of the Network Storage Recording Time Per Event option in BUTIR General Setting is longer than the Interval time in Network Storage Schedule the recorded file S kisak will be a continuous video clip For example if you set the Network Storage Recording oe Time Per Event as 10 seconds and the Interval as 5 seconds recorded file becomes a non stop video clip because the camera will record a 10 second video clip every 5 ae oo seconds e Motion Detect Profile Select the Enable option to enable the trigger function of the camera so that you can send captured images within the detecting area to the FTP server email receiver or the Network Storage server You have to configure corresponding settings such as FTP server and email server to enable this feature Please note that you have to configure the related settings before enabling these features Schedule Profile Select a schedule profile from the pull down list Action
18. color Copyright 2012 TRENDnet All Rights Reserved For example when you select the Include Date amp Time and Include Text options and click Apply you can see the related information displayed on the live view image when you click the Mae button TRENDner fxdaziuale uit Screenl f 2012 04 02 12 11 52 O OEE L Event Server The Event Server menu contains three sub menus that allow you to upload images to FTP send emails that include still images and store the images to a NAS system TRENDNET Megapixel PoE Dome Day Might Internet Camera TWHP262P Lossin 202m OEDI DE Live ViN Event Server Setting HMF CE Notify For Metion Trigger Smart Wirard Part User Hams Basic Password EEE Network TaN eS SASL Video Audia Event Server HIIF FIF Motion Detect Event Config Tools 50 Card Device Info opm O AN PENUnpt A Hights Poser When you complete the required settings for HTTP Notify for Motion Trigger FTP Email Network Storage or Instant Message click Test to test the related configuration is correct or not Once the camera connects to the server successfully click Apply 22 TRENDnet User s Guide TV IP262PI HTTP Notify For Motion Trigger Event Server Setting HTTP HTTP Notify For Motion Trigger cgi event cgi status s amp time t Test Send the query parameter via an HTTP notification when an event is triggered H
19. crophone sold separately Audio out port Mono speakers sold separately Sensitivity 42dB 3dB Frequency 100 10 000Hz S N 65dB Format PCM AMR Manually adjust camera to final fixed position Pan 175 175 Tilt 20 90 Copyright 2012 TRENDnet All Rights Reserved TV IP262PI Supports SD SDHC up to 32 GB SD card not included IEEE 802 3u 10 100Mbps Fast Ethernet IEEE 802 3af PoE Power Link Act can turn off LEDs Reset Button Reboot or restore to factory default Input 100 240V AC 0 5A 50 60Hz Output 12VDC 1 5A external power adapter for non PoE installations 131 x 131 x 127 mm 5 2 x 5 2 x5 in 570 g 20 1 oz Temperature Operating 0 C 50 C 32 F 122 F nel Storage 15 C 60 C 5 F 140 F Max 90 non condensing 34 TRENDnet User s Guide Requirement Management Internet Explorer 7 0 or above Interface To Run SecurView Windows 7 32 64 bit Vista 32 64 bit XP 32 64 bit Pro Windows Server 2003 2008 SecurView Pro Channel supports up to 32 cameras Record Playback Motion Detection Audio Network Protocols TCP IP IPv4 DHCPv6 UDP ICMP DHCP NTP DNS DDNS SMTP FTP HTTP HTTPs Samba PPPoE UPnP Bonjour RTP RTSP SSL RTCP 3GPP Compliant with 8 1 to 8 4 ONVIF 1 01 1 26 platforms Management Remote Remote management supported Backup Restore Save retrieve configuration files Copyright 2012 TRENDnet All R
20. ddress TV IP262PI 001A97019B8E if you don t see your camera s MAC address confirm that the camera is powered up confirm your computer is connected to your network and then click the Retry button Home Ret Back Next Home Back Next You MUST change the default password of the camera Enter the default password admin Enter your new password must be between 8 and 32 characters Alphanumeric a z A Z 0 9 Change password You MUST change the default password of the camera Enter the default password admin Enter your new password must be between 8 and 32 characters Alphanumeric a z A Z 0 9 Admin ID Password New password Confirm new password TRENDnet User s Guide TV IP262PI 9 Type in the new and confirm the new password by entering the password 11 You can also click Finish to exit the program or click Home return to the main twice screen Change password Congratulations The camera is now ready to be installed in its final location You MUST change the default password of the camera Enter the default password admin Enter your new password must be between 8 and 32 characters Alphanumeric a z A Z 0 9 Admin ID Password New password Confirm new password 10 Click TV IP262P to access to the camera web page Initial setup is complete Local access from your computer To access the camera now click here lf DHCP Mode Selected In this mode the camera s IP Address may
21. e default player on the phone by entering the RTSP link rtsp IP address of the camera 3gp Copyright 2012 TRENDnet All Rights Reserved Video amp Audio gt gt Audio Video amp Audio Audio Camera Microphone In Camera Speaker Out ae MKC e Camera Microphone In Select the Enable option to enable the camera s audio function so that you can receive the on site sound and voice from the camera e Camera Speaker Out Select the Enable option to enable the camera s external speaker function so that the connected speaker can play the sound and voice through the camera You can set the speaker s volume by entering the proper value in the Volume option The default setting is 90 Video amp Audio gt gt Overlay Mask Overlay Mask image Overlay Image File Browse Preview Upload Delete Privacy Mask Window 1 v ER Enable m a A Save Cancel s 3 This sub menu is used to set the image overlay and mask feature of the camera e Image Overlay This item allows you to set the image overlay 21 TRENDnet User s Guide TV IP262PI In the Image File option click Browse to select the image file from your computer and then click Upload You can click Preview to check the image size and adjust the image position before clicking Upload The preview image area is displayed with red dotted line If you want to remove the preview image before uploading click
22. elated setting values IP Subnet Mask Default Enter the IP address of the camera The default setting is 192 168 10 30 Enter the Subnet Mask of the camera The default setting is 255 255 255 0 Enter the Default Gateway of the camera The Copyright 2012 TRENDnet All Rights Reserved Gateway default setting is 192 168 10 1 Primary DNS Domain Name System translates Secondary domain names into IP addresses Enter the DNS Primary DNS and Secondary DNS that are provided by ISP PPPoE Select this option when you use a direct connection via the ADSL modem You should have a PPPoE account from your Internet service provider Enter the User Name and Password The camera will get an IP address from the ISP as starting up NOTE Once the camera get an IP address from the ISP as starting up it automatically sends a notification email to you Therefore when you select PPPoE as your connecting type you have to set up the email or DDNS configuration in advance e DDNS Setting With the Dynamic DNS feature you can assign a fixed host and domain name to a dynamic Internet IP address To set up the DDNS 1 Select the Enable option to enable this feature 2 Select the Provider from the pull down list 3 Enter the required information in the Host Name User Name and Password boxes NOTE You have to sign up for DDNS service with the service provider before configuring this feature e UPnP
23. er section assign an HTTP port of the camera The default HTTP Port on the camera is 80 The example shows above is using port number 9000 Copyright 2012 TRENDnet All Rights Reserved 4 TV IP262PI Open another web browser and go to your Router s Web Configuration page In the example TRENDnet s TEW 651BR Wireless N router is used TRENDnet ain Wireless Status Routing Access Filter Virtual Server Special AP DMZ Firewall Rule Management ools Wizard 150Mbps Wireless N Home Router TEW 651BR Help Virtual Server cc a C msr freze O ooo E arseron freroo Jooo E arsenas frora ooo E arsenaus fuos Jooo E marsen frores Jooo io io io io Virtual Server POP3 TCP 110 110 0 0 0 0 Virtual Server Telnet TCP 23 23 0 0 0 0 NetMeeting TCP 1720 1720 0 0 0 0 Copyright 2009 TRENDnet All Rights Reserved 31 TRENDnet User s Guide TV IP262PI 5 Goto Virtual Server section and create a new entry vituaiseverFTe o Server FTP rr Enable Click Enable TCP 80 80 0 0 0 0 Name Enter the application name eg CameraName dar aS pases aaa C fansens hoes o ooo Virtual Server SMTP TCP 25 25 oooo o 0 0 0 Protocol Select TCP Virtual Server POP3 TCP 110 110 0 0 0 0 Virtual Server Telnet TCP 23 23 0 0 0 0 Private Port The HTTP port that you assign on your Camera Public Port The port used on remote side to access to your Cam
24. era PPTP TCP 1723 1723 0 0 0 0 NetMeeting TCP 1720 1720 0 0 0 0 vV IP Camera TCP 9000 9000 192 168 1 101 Copyright 2009 TRENDnet All Rights Reserved LAN Server The local IP address of your Camera Virtual Server eip 6 Open another web browser and enter your DDNS domain and camera s port number e TCP v ee Nen Tab Windows net CE JJ E nttovitrendnetdyninsorss00df s Ne Je http trendnet dyndns org 9000f romeo SSCS rele SSS 7 Camera s login page will appear Then click Add to add the application Configure DDNS on your router Please refer to your router s user s manual for detail Virtual Server setting 1 Goto Camera s DDNS gt Ports Number section assign a HTTP port for your Some router might use Port Forwarding or Special applications for this camera and click Apply function The setup steps should be very similar DDNS Setting F Enable Provider www dyndns com Host Name User Name Password ee ae erp ee Copyright 2012 TRENDnet All Rights Reserved 32 TRENDnet User s Guide TV IP262PI 2 Login to your router s web configuration page 5 Go to Virtual Server section and create a new entry Enable Click Enable 3 Find the Dynamic DNS configuration section a Name Enter the application name eg Camera Name TRENDNET 150Mbps Wireless N Home Router Protocol Select TCP C mem Dynamic DNS ue Help Age Fons Enabiea pisaba sd P
25. et User s Guide TV IP262PI Viewing Camera Basic Function Open the Web browser on your computer example showed in the User s Guide is based on the Internet Explorer Type the default IP address 192 168 10 30 or the IP address found by IPSetup in the Address bar and then press Enter New Tab Windows Interne et explorer Gai http 192 168 10 30 File Edit View Favorites Tools Help When the login window appears enter the default User name admin and Password admin and press OK to access to the main screen of the camera s Web Configuration Windows Security The server 192 168 10 30 at netcam requires a username and password Warning This server is requesting that your username and password be sent in an insecure manner basic authentication without a secure connection ser name s Password Remember my credentials If you are initially access to the camera you will be ask to install a new plug in for the camera Permission request depends on the Internet security settings of your computer Click Yes to proceed Copyright 2012 TRENDnet All Rights Reserved After you login into the Web Configuration of the camera the main page will appear as below TRENDNET Megapixel PoE Dome Day Night Internet Camera TV4P262m BOSWELL eS The Main screen of the Web Configuration provides you with many useful inf
26. fault 1234 ze eee supports RSTP authentication method selected Audio Port 1238 default 1238 i _ Multicast settings Configure the following settings so that you can deliver aae information from your camera to a set of receivers Live AudiopscP 0 sa sss Group IP Assign a category of IP addresses to receive the information E H 264 Port Assign a multicast port for H 264 in the text box e HTTPS The default port is 1234 Enable Select this option to enable HTTPS which is a secure protocol to MPEG4 Port Assign a multicast port for MPEG4 in the text box provide authenticated and encrypted communication within your network The default port is 1236 HTTPS Port Assign a HTTPS port in the text box The default HTTPS port is Audio Port eS ons multicastport araudian theterrhox 443 The default port is 1238 e Bonjour The devices with Bonjour will automatically broadcast their own TTL Set the TTL value from 1 to 255 which is used to modify services and listen for services being offered for the use of others If your the time to live field in the IP header browser with Bonjour you can find the camera on your local network without knowing its IP address e QoS The Apple Safari is already with Bonjour You can download the complete Live Video DSCP Assign the DSCP DiffServ Code Point of the stream video Bonjour for Internet Explorer browser from Apple s web site by visiting from the camera http www apple com bonjour Live Aud
27. i Gateway http camera_ip address port number h264view htm ira Primary ON papa Becondary DNE Video Audio MPEG4 Mode Event Server http camera_ ip address port number mpgview htm Motion Detect ae O crabe Event Config ame MJ PEG M od e Boss hanme Tools Laar RSE http camera_ip address port number jpgview htm ae S oO C ard Farro NOTE This feature is enabled by default and for security reason it is recommended to nee have the feature enabled at all time war PortForwansing O Enso Ports Humber ENS HTTP Pew iets Lopngh AN PEM nst A Pgh Hier Copyright 2012 TRENDnet All Rights Reserved 16 TRENDnet User s Guide TV IP262PI Network gt gt Network Network Network Network DHCP Static IP C Enable Provider Host Name User Name Password IP Subnet Mask Default Gateway Primary DNS Secondary DNS User Name Password www dyndns com V Enable UPnP Port Forwarding C Enable Ports Number HTTP Port 80 default 80 e IP Setting This item allows you to select the IP address mode and set up the related configuration DHCP Select this option when your network uses the DHCP server When the camera starts up it will be assigned an IP address from the DHCP server automatically This is the default IP setting on the camera Static IP Select this option to assign the IP address for the camera directly You can use IP Setup to obtain the r
28. ights Reserved Recording snapshot Event Management Overlay TV IP262PI Automatic exposure white balance and gain control Brightness saturation sharpness light frequency and mirror horizontal vertical Encoding type H 264 MPEG 4 MJPEG Compression 5 levels Resolution Frame Rate SXGA 1280 x 1024 up to 15 fps 720p 1280 x 720 up to 15 fps VGA 640x480 up to 30 fps QVGA 320x240 up to 30 fps QQVGA 160x120 up to 30 fps Multi Stream e H 264 SXGA VGA QVGA QQVGA 720P e MPEG 4 VGA QVGA QQVGA e MJPEG SXGA VGA QVGA QQVGA 720P Recording type continuous schedule motion detection or snapshot Event trigger motion schedule Store video file to SD card or storage device Send Instant message to Jabber client via Jabber server Text overlay time date and text Mask overlay define up to 2 opaque boxes to conceal portions of the recording area 35 TRENDnet User s Guide TV IP262PI Port Settings HTTP port 80 default Troubleshooting RTSP port 554 default 1 The Power LED and Ethernet Activity LED do not light up The power supply or camera might be faulty Check that the connection to Digital Zoom both the power source and the terminal on the back of the camera are secure 3x ln and that you are using the provided power supply If the camera is otherwise functioning correctly the LEDs might have been disabled in the configuration See the System section under the Basic men
29. io DSCP Assign the DSCP DiffServ Code Point of the stream audio from the camera Copyright 2012 TRENDnet All Rights Reserved 18 TRENDnet User s Guide TV IP262PI Network gt gt IP Filter finished click Add to save the range setting You can repeat the action to assign multiple ranges for the camera For example when you enter 192 168 0 50 in Start IP Address and 192 168 0 80 in End IP Address the user whose IP address located within 192 168 0 50 192 168 0 80 will not be allowed to access the camera Network IP Filter IP Filter IPv6 Enter the IP Address that is not allowed to access the camera mi Video amp Audio End l Add The Video amp Audio menu contains four sub menus that provide the video and audio settings for the camera TRENDNET Megapixel PoE Dome Day Night Internet Camera TV IP262P1 al Loatcea DUDI ote The IP Filter setting allows the administrator of the camera to limit the users within a Video amp Audio Camera certain range of IP addresses to access the camera To disable this feature select the Disable option otherwise select the Accept option to assign the range of IP addresses that are allowed to access the camera or select the Deny option to assign the range of IP addresses that are blocked to access the ian camera KAT Disable Select this option to disable the IP Filter function of the camera ae Smart Wizard Basic Accept IPv4 Assign
30. k the Install Camera Power up the camera if using PoE to supply power to the camera please skip to the next step Plug in and connect the power adapter fo the camera The amber LED on the camera indicates it is powered Allow 60 seconds for the camera to boot up Camera Finder IPSetup Install SecurView Pro Quick Installation Guide User s Guide Product Registration Megapixel PoE Day Night Exit Dome Internet Camera TV IP262Pl Copyright 2012 TRENDnet All Rights Reserved TRENDnet User s Guide TV IP262PI 5 Connect a network cable to the camera s network port and then to your router 7 If you are using PoE please ensure the cable is connected to a PoE switch or PoE injector Connect the network cable Connect a network cable to the camera s network port and then to your router If you are using PoE please ensure the cable is connected to a PoE switch or PoE injector 8 6 Wait while camera is searching Searching for camera Please wait Copyright 2012 TRENDnet All Rights Reserved The founded cameras will show on the screen The camera already selected by default if you have only one camera installed If you have more than one camera in the same Network you will need to identify the camera by the MAC ID Select your camera The following cameras were detected on your network Check the MAC address of the IP Camera you are going to setup and select it from the list Model Mac A
31. n from the three formats VGA QVGA and QQVGA The higher setting VGA obtains better video quality while it uses more resource within your network Video Quality Select the desired image quality from five levels Lowest Low Medium High and Highest Frame Rate Select a proper setting depending on your network status e MJPEG Video Resolution Select the desired video resolution from the three formats SXGA VGA QVGA QVGA and 720P The higher setting VGA obtains better video quality while it uses more resource within your network Video Quality Select the desired image quality from five levels Lowest Low Medium High and Highest Frame Rate Select a proper setting depending on your network status None IE Browser Viewer Select the proper mode for viewing image while using none IE browser Java Applet Still Image or Server Push NOTE The camera supports both MPEG4 and MJPEG compression MJPEG capture the images in JPEG format which require higher bandwidth to view smooth video The administrator can control the bandwidth of each connection well through the setting options above e 3GPP The camera supports 3GPP specification To disable this feature select the Disable option otherwise select 3GPP Without Audio or 3GPP With Audio to transfer the video clips without or with audio If you use a mobile phone that supports 3GPP you can also view the real time streaming image captured by the camera on your phone with th
32. n smith Dewce Into iver 1 il Copyreght POUR IFENDret Ad Fogrits Meeerwed Receiver 1 Ema mary lynn mailserver com gt a a 0 on n Receiver 2 Email tom bae mailserver com Basic gt gt System gt a a oO nn a Basic System Basic Camera Name IPA Indication LED Indication LED Control Normal C OFF IR LED Control Copyright 2012 TRENDnet All Rights Reserved 14 TRENDnet User s Guide TV IP262PI e Basic This item allows you to assign the camera name and location information Camera Name Enter a descriptive name for the camera which is helpful to identify the camera easily while multiple cameras are connected within the network Location Enter a descriptive name for the location where is monitored by the camera Language Default Select the displayed language as default e Indication LED This item allows you to set the LED illumination as desired There are two options Normal and OFF e IRLED This item allows you to set the IR LED Auto or OFF Basic gt gt Date amp Time Basic Date amp Time Date and Time GMT 08 00 Pacific Time US amp Canada Tijuana v Automatically adjust clock for daylight saving time changes Synchronize with PC 9 Synchronize with NTP Server NTP Server Address Update Interval 6 hours Manual Date 2012 04 02 YYYY MM DD Time 12 01 10 hh mm ss e Date amp Time Enter the correct d
33. oduct has been modified or repaired by any unauthorized service center ii the product was subject to accident abuse or improper use iii the product was subject to conditions more severe than those specified in the manual Warranty service may be obtained by contacting TRENDnet within the applicable war ranty period and providing a copy of the dated proof of the purchase Upon proper sub mission of required documentation a Return Material Authorization RMA number will be issued An RMA number is required in order to initiate warranty service support for all TRENDnet products Products that are sent to TRENDnet for RMA service must have the RMA number marked on the outside of return packages and sent to TRENDnet prepaid insured and packaged appropriately for safe shipment Customers shipping from outside of the USA and Canada are responsible for return shipping fees Customers shipping from outside of the USA are responsible for custom charges including but not limited to duty tax and other fees Copyright 2012 TRENDnet All Rights Reserved WARRANTIES EXCLUSIVE IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE THE CUSTOMER S SOLE REMEDY SHALL BE AT TRENDNET S OPTION REPAIR OR REPLACE THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED EITHER IN FACT OR BY OPERATION OF LAW STATUTORY OR OTHERWISE INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
34. onnection Copyright 2012 TRENDnet All Rights Reserved Authentication Mode Select None to disable the authentication feature or select SMTP and then enter the User Name and Password according to the mail server configuration Sender User Name Enter the user name to login the mail server Sender Password Enter the password to login the mail server Receiver 1 Email Address Enter the first email address of the user who will receive the email Receiver 2 Email Address Enter the second email address of the user who will receive the email Send Email With Set the format of the image that is to be sent by the email You can set the format as One Snapshot or images containing Pre event 0 3 seconds and Post event 0 3 seconds NOTE The Pre Event or Post Event only works when video resolution set up to 720P or lower It will not work with SXGA resolution WAN IP Change Notify Select the option to enable the system to notify you when the WAN IP address changed Event Server Setting gt gt Network Storage Event Server Setting Network Storage Network Storage e eee OCS Ce E O TCC File Size 100 MB Recording Time 30 Minutes Stop Recording When Storage Full Recycle Delete Oldest Folder MPEG4 Encode Format 2 H 264 MP4 AVI ee ELLA e Network Storage Samba Server Address Enter the IP address of the Network Storage server Share Assign the folder on the Network Storage server to share the
35. ormation and functions including 11 TRENDnet User s Guide TV IP262PI Live View Setup Switch e Click the phil button to configure the camera e Click the Setup button to return to the Main screen to view the live view image Compression Buttons Select to transmit and record the video using H 264 MPEG4 or MJPEG compression Manual Record allows you manually record and save a video clip Snapshot allows you to capture and save a still image Browse allows you to assign the destination folder to store the video clips and still images e Talk allows you to speak out through the camera Please note only one user is allowed to use this function at a time Listen allows you to receive the on site sound and voice from the camera Multicast allows you to change the camera s transmission type on multicast Live View The Live View Image window displays the real time image of the connected camera e The current compression mode of image is displayed above the Live View Image window e Click the Zoom In buttons 1x t 2 1 4fFull Screen for SXGA or E2 for VGA QVGA QQVGA 720p above the Live View Image window to zoom in the live view image by 1x 2x 3x 1 2 1 4 or full screen Camera Information Displays the camera s location and the current date amp time The information can be modified in the Web Configuration Copyright 2012 TRENDnet All Rights Reserved Ifyou are
36. ost Enter the IP of the HTTP server Port Enter the Port number of the HTTP server User Name Enter the username of the HTTP server Password Enter the password of the HTTP server Query Enter the query parameter for the request if necessary Example Host 192 168 10 1 Port 80 Query xxx cgi namel valuel amp name2 value2 Example cgi event cgi status s amp time t amp model modelname Result http 192 168 10 1 80 cgi event cgi status s amp time t amp model modelname Copyright 2012 TRENDnet All Rights Reserved Event Server Setting gt gt FTP Event Server Setting FTP Host Address 65 64 63 62 e r FTP Directory Path Passive Mode One Snapshot FTP Upload With Pre event sec s Post event sec s Pre event and Post event actions are unavailable with SXGA resolution e FTP Host Address Enter the IP address of the target FTP server Port Number Enter the port number used for the FTP server User Name Enter the user name to login into the FTP server Password Enter the password to login into the FTP server Directory Path Enter the destination folder for uploading the images For example TV IP262P Passive Mode Select the Enable option to enable passive mode FTP Upload With Set the format of the image that is to be uploaded to the FTP server You can set the format as One Snapshot or images containing Pre event 0 3 seconds and Post event 0 3 seconds NOTE The Pre Even
37. p Audio Video Network 00 ALO Camara Event Server Motion Detect H 264 Event Contig Video Resolution SXGA v MPEG4 Tools SO Card Dewce Info O lt gt 4 Coperegtt PO1P TFENDret As agite Meeorwed e Image Setting MJPEG Brightness Adjust the brightness level from O 100 SXGA v Saturation Adjust the colors level from O 100 High v Sharpness Adjust the sharpness level from O 100 15 v fps Click Default to restore the default settings of the three options above te coll 3GPP Mirror Select Vertical to mirror the image vertically or select Horizontal 9 Disable to mirror the image horizontally E 3GPP With Audio Light Frequency Select the proper frequency according to the camera s location 50Hz or 60Hz mnan AE Enable Enable or disable the AE Auto Exposure control Night mode Change night mode to color or Mono Copyright 2012 TRENDnet All Rights Reserved 20 TRENDnet User s Guide TV IP262PI eH 264 Video Resolution Select the desired video resolution from the four formats SXGA VGA QVGA QVGA and 720P The higher setting SXGA obtains better video quality while it uses more resource within your network Video Quality Select the desired image quality from five levels Lowest Low Medium High and Highest Frame Rate Select a proper setting depending on your network status e MPEG4 Video Resolution Select the desired video resolutio
38. pgrade the firmware for your camera once you obtained a latest version of firmware Current Firmware Version This item displays the current firmware version Select the firmware Click Browse to locate the backup file and then click Update Make sure to keep the camera connected to the power source during the process of upgrading firmware Otherwise the camera might be damaged because of failure of upgrading firmware SD Card The SD Card menu allows you to set the SD card function installed in the camera TRENDnet Megapixel PoE Dome Day Night Internet Camera TV4AP262PI Location 20120104050317 SD Card SD Card Setting Ge Sewp SD Card Dismount Smart Wizard SD Card Information Total space SU Us Basic Free space Network SD Card Setting When Storage Full Video Audio Event Server Encode Format Motion Detect File Format Event Config Tools SD Card Device Info Copyright 2012 TRENDnet All Rights Reserved 28 TRENDnet User s Guide TV IP262PI SD Card gt gt SD Card Setting SD Card gt gt File Manager The File Manager menu allows you to download files from the SD card Simply click the ee Download button to start downloading files SD Card Dismount Safely dismount SD Card SD Card Information SD Card File Manager File Manager E 20120402 File Name 20120402 12 120152 mp4 H 120000 mp4 FA 120124 mp4 FA 120152 mp4 FA 120305 mp4 FA 120505 mp4 El 1
39. plorer make sure ActiveX has been enabled in the Internet Options menu You may also need to change the security settings on your browser to allow the ActiveX plug in to be installed 3 TRENDnet User s Guide TV IP262PI Limited Warranty TRENDnet warrants its products against defects in material and workmanship under normal use and service for the following lengths of time from the date of purchase TV IP262PI 3 Years Limited Warranty AC DC Power Adapter Cooling Fan and Power Supply carry 1 year warranty If a product does not operate as warranted during the applicable warranty period TRENDnet shall reserve the right at its expense to repair or replace the defective product or part and deliver an equivalent product or part to the customer The repair replacement unit s warranty continues from the original date of purchase All products that are replaced become the property of TRENDnet Replacement products may be new or reconditioned TRENDnet does not issue refunds or credit Please contact the point of purchase for their return policies TRENDnet shall not be responsible for any software firmware information or memory data of customer contained in stored on or integrated with any products returned to TRENDnet pursuant to any warranty There are no user serviceable parts inside the product Do not remove or attempt to service the product by any unauthorized service center This warranty is voided if i the pr
40. r network DHCP Static IP or PPPoE Sender Password mary lynn mailserver com tom bae mailserver comf eel el mms OC S SCSCSCSC CS mutenicatonitode Onene WE Receiver 1 Email Address Receiver 2 Email Address Copyright 2012 TRENDnet All Rights Reserved 13 TRENDnet User s Guide TV IP262PI e Confirm Settings Basic The Basic menu contains three sub menus that provide the system settings for the The last step shows the configuration of your camera When you confirm the camera such as the Camera Name Location Date amp Time and User management settings click Apply to finish the wizard and reboot the camera Otherwise click Prev to go back to the previous step s and change the settings or click Cancel to end the wizard and discard the changes TRENDNET Megapixel PoE Dome Day Night Internet Camera TV IP262P1 cares WSU stag Confirm Settings PVE Basic System O0 Soup TV IP262PI Basic SS Sones aoc SSS ees Indication LED ASIC DHCP S le amp co Rie le 5 e o 3 IPv4 Address 192 168 10 30 Pima ous oo secondayonss aypan Dace Thm Veer Network EEE Video Aude Event Server oevar ee Motion Detect sn a SSL Disable Event Config STARTTLS Disable Sender Email Address john smith myserver com Tools Authentication Mode SMTP SO Card Sender User Name joh
41. ra lens by turning the base pedestal in either clockwise or counter clockwise direction Adjust the lens focus by turning the lens ring slowly in either clockwise or counter clockwise direction TRENDNET TV IP262PI NOTE You can review the image quality from the Web browser when you complete the installation If the image quality is poor you have to disassemble the Dome cover to adjust the lens focus until the desired image appears clearly 5 Put the Dome cover back and secure with four screws TRENDnet User s Guide TV IP262PI Camera Installation 3 Write down the MACID of the camera 1 Insert the Installation CD ROM into your computer s CD ROM drive to initiate ee address Of your camera This information is required in the installation process The MAC address is located on the the Auto Run program camera label shown in photo below a TRENDNET Mapait _ MODEL NO TV IP262PI1 SERIAL NO MACNA MUN AMAN i XXXXXXXXKX 7 XX mac anpress U T ON OINI XXXXXXXXXXXX Input 12VDC 1 5A XX Install Camera Camera Finder IPSetup FAN X X X XX HAN VX XR MADE IN TAIWAN Install SecurView Pro k Quick Installation Guide User s Guide Product Registration Megapixel PoE Day Night Exit Dome Internet Camera TV IP262PI 4 Connect one end of the power adapter into the Power Connector then click on Next Please click Next if you are using the PoE injector or switch 2 lic
42. rivate Port The HTTP port that you assign on your Camera a DynDns com Public Port The port used on remote side to access to your Camera Dynamic DNS Wireless mm as os Access Wanagement ooIs Wizard LAN Server The local IP address of your Camera Virtual Server E Enable Disabled Copyright 2009 TRENDnet All Rights Reserved 4 Enable DDNS fill out the following information and then click Apply Click Add to add the application Please refer to your router s user s manual for detail Virtual Server setting Some router might use Port Forwarding or Special applications for this Enabled Disabled function The setup steps should be very similar Dynamic DNS Server Address DynDns com 6 Open another web browser and enter your DDNS domain and camera s port number loa http yourDomainName PortNumber Password New Tab Windows Internet Explorer 9 e amp Ss iw e http trendnet dyndns org 9000f 7 The camera login page will appear trendnet dyndns org Copyright 2012 TRENDnet All Rights Reserved 33 TRENDnet User s Guide Technical Specifications Camera Pan Tilt Manually Sensor 1 4 Megapixel CMOS sensor Max Resolution 1280 x 1024 pixels Board Lens Focal Length 3 58 mm Aperture F No F2 0 5 Minimum illumination O Lux night vision Viewing Angle Horizontal 70 Vertical 51 Diagonal 89 Microphone out port mi
43. sword Enter the password to login into the Jabber IM service Manually Specify Server Host Port Select the Enable option to manually configure the Jabber server settings Jabber Server Address Enter the Jabber server address manually Copyright 2012 TRENDnet All Rights Reserved Jabber Port Assign the Jabber port manually in the text box Encrypt Connection Select the Enable option to secure the connection Encrypt Authentication Select the Enable option to secure the connection Receiver Enter the receiver s information Message Enter the message that is to be sent Motion Detect The Motion Detect menu contains the command and option that allow you to enable and set up the motion detection feature of the camera The camera provides three detecting areas To enable the detecting area select Window 1 2 3 from the pull down list and then select Enable When the detecting area is enabled you can use the mouse to move the detecting area and change the area coverage TRENDnet Megapixel PoE Dome Day Night Internet Camera Tv IP262PI Locatom 2012 01104 05 1602 Smart Wizard Basic Network Video Audio Event Server Motion Detect Event Config Tools SO Card Device Info ta Itea e mgoa Sees e Name Assign a name to the detecting area e Threshold Move the slide bar to adjust the level for detecting motion to record video NOTE Sliding the Threshold bar to the right will decrease the sensiti
44. t measures the light signals and changes it into a digital format so your computer can present it into an image that you are familiar with has become overloaded when it has been exposed to bright lights such as direct exposure to sunlight or halogen lights Reposition the Network Camera into a more shaded area immediately as prolonged exposure to bright lights will damage the CMOS sensor The Camera images are blurry Adjust the lens focus by turning the lens ring slowly in either clockwise or counter clockwise direction The camera images are noisy Often if the camera is in a low light environment the images can contain a lot of noise Try to select the different AE control options to adjust shuttle speed under Video Audio menu Otherwise try to use the camera in a location where there is a bit more light The camera images are of poor quality Make sure that your computer s display properties are set to at least 16 bit color Using 16 or 256 colors on your computer will produce dithering artifacts in the image making the image look as if it is of poor quality Copyright 2012 TRENDnet All Rights Reserved Try also adjusting the brightness saturation sharpness and light frequency on the Video settings under the Video Audio menu You may also adjust the AE control to improve the image Video can t be viewed through the web browser interface ActiveX might be disabled If you are viewing the images from Internet Ex
45. t or Post Event only works when video resolution set up to 720P or lower It will not work with SXGA resolution 23 TRENDnet User s Guide TV IP262PI Event Server Setting gt gt Email Event Server Setting Email Email SMTP Server Address n Email Address com This server requires an encrypted connection SSL STARTILS ira Authentication Mode None SMTP Sender Sender Password Receiver 1 Email mary mysenr com Address y d Receiver 2 Email george gmail com Address i One Snapshot Send Email With Pre event sec s Postevent Y sec s Pre event and Post event actions are unavailable with SXGA resolution cee Mee Mc e Email SMTP Server Address Enter the mail server address For example myserver com If you are using a free mail service e g Google Gmail Yahoo Hotmail please enter the SMTP server address from the service provider Sender Email Address Enter the email address of the user who will send the email For example John myserver com SMTP Port Assign the SMTP port in the text box The default SMPT port is 25 For the free mail service please enter the correct port number from the service provider SSL or STARTLLS If the mail server requires an encrypted connection you should select the SSL option STARTTTLS is an extension to plain text communication protocols It offers a way to upgrade a plain text connection to an encrypted TLS or SSL c
46. t software Define up to three motion detection windows with email alert image snapshot and continuous recording triggers Scheduled recording sessions and define video storage location with Samba client support Multiple video streaming support for H 264 MPEG 4 and MJPEG compression types Other features include two way audio support mic and speaker sold separately date time text overlay mask overlay to conceal sensitive areas and image flip capabilities for upside down installations Integrated cabling allows for easy wall ceiling mounting and the off white IP camera housing blends into most environments TRENDnet s Mobile APP supports iPhone iPad iPod Touch and Android Search for SecurView Mobile from iTunes or Google Play For future updates please check www trendnet com App for details Monitoring multiple cameras may required a high performance CPU TRENDnet User s Guide TV IP262PI Product Hardware Features e Reset Press and hold the reset button for five seconds to reset the camera to factory default settings Rear Panel View Front Panel View e Power Connector Connect the provided power adapter to supply power to the camera for non PoE installation e SD Card Slot Insert a memory card for expansion of storage e Ethernet PoE Connector Connect the provided network cable RJ 45 type to Ethernet PoE port for wire or PoE connection The connector supports Power over Ethernet
47. t to modify from UserList and click Add Modify UserList Display the existing users of the camera To delete a user select the one you want to delete and click Delete e Guest User Name Enter the guest s name you want to add to use the camera Password Enter the password for the new guest UserList Display the existing guests of the camera To delete a user select the one you want to delete and click Delete 15 TRENDnet User s Guide TV IP262PI NOTE The General User is allowed to access the camera and control the Function buttons on the Main screen of the Web Configuration the Guest can only view the Network live view image from the Main screen while accessing the camera Only the The Network menu contains two sub menus that provide the networking settings for Administrator is allowed to configure the camera through the Web Configuration the camera such as the IP Setting DDNS Setting and IP Filter e Direct Video Stream Authentication To steam the video directly without going through the configuration page you can TRENDNET Se FoS Dome Tey mie meerner Samare access it via Internet Lonasicn 20120104 Gah Enable User needs to enter user name and password to stream the camera Co a Network Network 6 Setup Disable User can stream the camera without entering the user name and SS password Smart Wizard Examples of the direct link to video Basic POSEEN H 264 Mode yo Detiau
48. u 2 The camera can t be accessed or access is slow ss There might be a problem with the network cable To confirm that the cables are working ping the address of a known device on the network If the cabling is OK and your network is reachable you should receive a reply similar to the following bytes 32 time 2 ms Another possible problem may be that the network device such as a hub or switch utilized by the Network Camera is not functioning properly Please confirm the power for the devices are well connected and functioning properly 3 The camera can be accessed locally but not remotely This might be caused by a firewall Check the Internet firewall with your system administrator The firewall may need to have some settings changed in order for the Network Camera to be accessible outside your local LAN For more information please refer to the section about setting up accessing your camera behind a router Copyright 2012 TRENDnet All Rights Reserved 36 TRENDnet User s Guide TV IP262PI Make sure that the Network Camera isn t conflicting with any Web server you may have running on your network The default router setting might be a possible reason Check that the configuration of the router settings allow the Network Camera to be accessed outside your local LAN White vertical lines appear on the image from the camera It could be that the CMOS sensor a square panel situated behind the lens tha
49. using Microsoft 7 Vista platform you may not be able to find the recorded files by Snapshot or Manual Record You will need to disable the protected mode of Security in the IE browser before recording a video file or taking a snapshot Please follow the below steps 1 Open IE Browser 2 Select Tools gt Internet Options 3 Select Security 4 Uncheck the Enable Protected Mode then press OK Configuring the Camera Setting To configure the camera click on the Main screen of Web Configuration The Web Configuration will start from the Basic page TRENDnet Megapixel PoE Dome Day Night Internet Camera TV IP262P1 Location 20120104 044828 Basic System Basic Camera Name banner eer A Smart Wizard Location Basic Indication LED Control Normal OF D Date Time ERLE id IR LED Control Asto Network Video Audio Event Server Motion Detect Event Config Tools SD Card Device Info Copyright 2012 TRENDnet All Rights Reserved 12 TRENDnet User s Guide TV IP262PI The Web Configuration contains the settings that are required for the camera in the left IP Setting menu bar including Smart Wizard Basic Network Video Audio Event Server Motion 8 DHCP detect Event Config Tools SD Card and Information are IP Subnet Mask Smart Wiz a rd Default Gateway Primary DNS The camera s Smart Wizard lets you configure your camera easily and quickly The en wiz
50. utility the application is automatically installed to your computer and creates a folder in Start Program TRENDnet IPSetup 5 Click Start gt Programs gt TRENDnet gt IPSetup and then click IPSetup L TRENDnet JL PSetup E gt IPSetup 6 The IPSetup window will appear It will search for the camera within the same network IPSetup IP Address Device Name A e 192 168 10 30 T IP262PIl 00 14 97 01 9B 8E Camera Display Area Copyright 2012 TRENDnet All Rights Reserved Access Camera Open Web browser to view camera Camera Display Area By default the IP setting on the Camera is set to DHCP If you have DHCP server the camera will automatic get the IP address from DHCP server If you do not have DHCP server on your network it will show the default IP as 192 168 10 30 Double click the IP address it will link to Camera s Web Configuration page Change IP Click this button to bring up the following window It allows you to change the IP Address You can select either Static IP or click DHCP Then enter the Administrator ID amp Password By default the ID Password is admin When complete click Change Change IP Address Static IP IP Address Submask Default D DHCP Administrator ID amp Password ID Password Change Search Click this button to search the connected camera in the same network Exit Click this button to exit the program TRENDn
51. vity of motion detection sliding the Threshold bar to the left will increase the sensitivity of motion detection 25 TRENDnet User s Guide TV IP262PI Snapshot Recording Subfolder You can assign a given subfolder to each Event Confi new captured file Otherwise leave this option blank to use the default The Event Config menu contains five sub menus that provide the commands to setting configure event profiles Network Storage Recording Time Per Event Limit the recording time while you are using the Network Storage solution TRENDNET Megapixel PoE Dome Day Night Internet Camera inisi Event Configuration gt gt Arrange Schedule Profile Location 20120104 0509137 Event Configuration Arrange Schedule Profile YF Live View Event Configuration General Setting General Filename Prefix k s SpSsnotrecorang ename erx Pesorainoimenat POr SLOAN POOPIE FENE or vent Recording Interval Schedule Profile Network Video Audio Event Server See e Schedule Profile This sub menu displays the scheduled profile s To customize Gy the profile click Add and then enter a descriptive name for the profile in the soi prompt dialog window After entering the profile name click OK and the profile TENE is added to the Schedule Profiles list Sohodule Trigger Tools To delete the profile select the profile in the list and click Delete SD Card 5 Event Configuration Arrange Schedule Profile

TV-IP262PI - Ingram Micro

Contents

Download Pdf Manuals

Related Search

Related Contents