User manual - Sams elektronik doo
Contents
1. This product is powered by AC 230V 10 50Hz 10 This product is equipped with a three wire cord with grounding 11 This device is equipped with a protective fuse in the power outlet Do not bypass fuse 12 Do not replace the fuse Replacement can be made by a person authorized by the manufacturer 13 Do not bend the power cord so that it can be damaged 14 Connect connectors as in the enclosed instructions Deviations from the allowed values predicted for the inputs and outputs of the device can cause severe damage and warranty void 15 Do not use the device in an environment that contains flammable or explosive materials in any physical state 16 Turn off the power corde before cleaning Do not use liquid aerosol or flammable cleaners Use only a dry cloth 17 Servicing is performed by a qualified person Removing the cover user is exposed to high voltages 18 Never use the device when the cover is open and the device is powered on 19 Do not expose to extreme high or low temperatures 20 Do not expose to sudden temperature changes 21 Call service in the following cases The power cord or plug is damaged Liquid or foreign objects is inside the device The machine is exposed to water and moisture The device does not function according to specification The unit has been dropped or damaged The characteristics are significantly changed 22 Use only specified replacement parts 23 Professional person authoriz2. e alten Le 5 40 C w l e l eE E E AEA E 0 50 C ORDERING INFORMATION Code Name Description 005 127 DA 12 AC 001 509 ADCV 8 Back connector 001 605 SRU 306 Rack frame for 6 modules Specifications and designs are subject to change without notice BACK CONNECTOR ADCV 8 BLOCK DIAGRAM SDI OUT SDI IN gt gt BETACAM CVBS RECLOCKER ANALOG OUT DAC Sams elektronik doo e Sams sams rs e www sams rs 7 Sits Converters elektronik DA 12s SDI to multiformat analog converter Broadcast quality 12 10bit processing Converts SDI to YUV RGB CVBS or YC Digital output Save 4 different presets 4x oversampling Complete ProcAmp adjustment Integrated Test Generator Black Color Bar Easy setup with local control and LCD display DA 12s converts SDI to composite or component analog video With both available composite and component Y Cr Cb or RGB or YC outputs this unit is ideal for converting all types of analog video Complete ProcAmp output signal controls are provided for all output formats rear side TECH NICAL SPECI FICATIONS Specifications and designs are subject to change without notice GENERAL INFORMATION POWER et Mel 005 111 ee 230V AC 10 E S E 1 5 Kg POWET EEN 30W TY E EEA E A TRU rack frame Frequengy ssesssesrsneurrneurnnunrrnnnnrnennrnrnnrnnnnnennrnennrnennnn 50Hz Bee ee ee Steeg 19 x aa Overload protection 0 front Mo
3. Y GREEN Y U BLUE IT C V RED DAC Sams elektronik doo Sams sams rs e WWW Sais Fe 13 sda mS elektronik Converters INSTALLATION STANDALONE For the best signal quality use Belden 8281 or better coaxial cable for analog video Belden 1694A or better coaxial cable for digital video Connect the power cord The device works only on AC 230 V 50 Hz Rear side Turn on the device Connect all necessary connectors by pressing switch before the unit is turned on Connectors on rear side Analog inputs The device supports composite and component signal CVBS amp YC RGB YUB BETA nd no Jas 0K SAVE UP a F MENU BACK DOWN 12 10bit digital to multiformat analog converter with frame sinchronizer Front side If everything is OK the LED will glow green 14 Sams elektronik doo e sams sams rs e www sams rs DAC sda mS elektronik Co nverters THE DEVICE FUNCTIONS 79 TEE ENE 6 d When you turn on the device and if it is properly connected the status is displayed 1 OK SAVE push button enters the submenu saving 2 STATUS LED e GREEN the device is in normal mode RED flashing has a external reference but there is no input signal e Sr wl D ti 3 Display 4 _MENU BACK push button enter the menu from status mode exit from the submenu 5 UP push button Frame Freeze choose the value in the submenu freezes the image in the status
4. mode 6 DOWN push button choose the value in the submenu ERRORS WITH CONNECTIVITY AND STATUS SEED KAES If you notice that the LED flashes red verify that the incoming Signal is correct or check if the incoming signal cable is properly connected x I kb 1 EIEN EJER No input signal DAC Sams elektronik doo Sams sams rs e www sams rs 15 sdf mS Converters elektronik FACTORY SETUP OUTPUT CVBS amp YC HV BLANK PASS ALL H POS 00 000us V POS 000 lines ERROR MODE PASS ALL LUMA LEVEL 100 COLOUR LEVEL 100 PEDESTAL 0 0 Ire SHARPNESS 0 0 db YC DELAY 0 0 t Settings for analog output Does not affect digital output MENU To set the device press the MENU BACK button Select the menu by pressing the UP DOWN keys On the selected menu press OK OK SAVE UP oF as MENU BACK DOWN a 9 Entering the menu for setting the device 16 Sams elektronik doo e Sams sams rs e www sams rs DAC Glen elektronik Converters MENU TREE UP MENU BACK STATUS OUTPUT CVBS amp YC YUV BETACAM RGB Zi HV BLANK PASS ALL Lk ALL 3 HORIZONTAL POSITION 0 000uIs 63 963us 4 VERTICAL POSITION 000 lines 5 lines BLACK 75 COLOR BAR KILL OUT 0 100 200 5 ERROR MODE ae ALL 6 LUMA LEVEL 7 COLOR LEVEL 0 100 200 8 PEDESTAL 7 5 Ire 0 0 Ire 15 0 Ire 9 SHARPN
5. one video line 63 963us During the change in value it may cause short term image disturbance in monitor due to the transition to a new time The factory setting is 0 000us Select an option by pressing the UP DOWN keys OK SAVE UP oan e a MENU BACK DOWN TE Menu Horizontal position Once you have selected the option press the MENU BACK button Option is temporarily saved 18 Sams elektronik doo e sams sams rs e www sams rs DAC sda mS elektronik Co nverters 4 VERTICAL POSITION This menu is used to adjust the vertical phase of the output video signal The vertical delay is adjusted in increments of one video line from 1 up to the 5 The factory setting is 1 lines Select an option by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN Cie Menu Vertical position Once you have selected the option press the MENU BACK button Option is temporarily saved 5 ERROR MODE This menu is used to set how the product behaves during a fault in the signal Select an option PASS ALL device pass signal no matter how bad signal is BLACK the unit will generate a black image due to poor incoming video signal 75 COLOR BAR the unit will generate a color bar due to poor incoming video signal KILL OUT device will cancel the signal at the output due to poor incoming video signal The factory setting is PASS ALL Select an option by pres
6. ENGLISH sdms m i Sams elektronik doo 48 Zivka Davidovica st 11050 Belgrade Serbia Tel Fax 381 11 3806 253 381 11 2402 212 sams sams rs www sams rs Copyright 1999 2014 Sams elektronik doo Published 16 april 2013 Updated 29 july 2014 210 3 edition 1 Code 005 127 005 111 DA 12 s SDI to analog video converter 12 10 bit for SRU rack frame standalone USER MANUAL FOR USE AND MAINTENANCE Read the instructions before using the device Keep this manual for periodic usage sda mS Converte rs elektronik WARRANTY Dear User Thank you very much for purchasing our product Your purchase is a wise investment The equipment you have purchased is manufactured with great care from high quality parts and materials It is designed to fully meet the needs according to specifications if properly installed used and maintained according to the enclosed instructions Any technical failure or deficiency that occurs during the warranty period specified on the invoice of the purchased equipment will be inspected and serviced by Sams elektronik doo or an authorized service center of the manufacturer with the conditions set out in the warranty statement THIS DEVICE IS INTENDED FOR PROFESSIONAL USE WARRANTY STATEMENT 1 Product has declared characteristics Within the warranty period manufacturer ensures the removal of technical failures product defects or replacement of products if de
7. ESS 4 0 dB 0 0 dB 4dB 10 YC DELAY 0 0 222 296 11 SETTINGS SAVE MEM 1 4 Loap MEM 1 4 FACTORY The bold options are the factory default settings DAC Sams elektronik doo e sams sams rs e www sams rs 17 Salts Converte rs elektronik 1 OUTPUT This menu is used to select the outgoing signal Options are CVBS amp YC YUV BetaCam and RGB The factory setting is CVBS Select an option by pressing the UP DOWN keys OK SAVE UP A d P MENU BACK DOWN E ge em Menu Output Once you have selected the option press the MENU BACK button Option is temporarily saved 2 HORIZONTAL VERTICAL BLANKING This menu is used for pass remove information that is contained in the horizontal and vertical blanking Choose one of options PASS ALL allow all the information contained in the horizontal embedded audio and vertical blanking from 6 to 22 lines KILL ALL remove all information contained in the horizontal and vertical blanking The factory setting is PASS ALL Select an option by pressing the UP DOWN keys OK SAVE UP GEAR MENU BACK DOWN EEE Menu HV Blank Once you have selected the option press the MENU BACK button Option is temporarily saved 3 HORIZONTAL POSITION This menu is used to adjust the horizontal phase of the output video signal Horizontal phase shifts in the intervals 37ns half of one pixel up to a maximum of
8. IZONTAL VERTICAL BUR EE 18 3 HORIZONTAL POSITION snssensannnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnne 18 ae VER TICAE POS MITON EE 19 F FRROR Eege 19 SN LUMA EEV E 19 Fe COLOR LEVE eee E E E 20 e PD E E 20 dE LEE E 20 1O EEA EE 21 DS GER E EE 22 VIS 22 DAC Sams elektronik doo Sams sams rs e WWW Sais Fe 5 Converters sadaf mS elektronik UNPACKING AND INSTALLATION The box contains Module Back connector optional Protective pad for SRU rack frame optional M2 5x6 7985 screw optional SRU rack frame optional Power corde for SRU rack frame optional User manual optional Before use check the contents of the box For any deficiency report to the seller or the manufacturer of the product DEVICE IS INSULATED BY PROTECTIVE WRAP AND PACKED IN A CARDBOARD BOX DEVICE IS SENSITIVE TO SHAKES AND DROPS HANDLE WITH CARE DURING TRANSPORT AND ASSEMBLY Check if the product is damaged during transport PROCEDURES FOR SAFE USE OF THE DEVICE il Places for fastening MAINTENANCE The system maintains only person authorized by Sams elektronik doo Any voluntarily opening device upgrading or servicing is strictly prohibited and is subject to warranty void and the possibility of If the device is not supplied with SRU rack frame remove the protective wrap from the device If the device is supplied with SRU rack frame remove the protective wrap
9. SaveMem3 and SaveMem4 The device can record 4 different settings After selecting a bank press OK SAVE The display will print SAVED If you want to stay in this menu press the UP DOWN keys and to exit the MENU BACK button In this menu there are options LoadMem1 LoadMem2 LoadMem3 and LoadMem4 or options to load settings After selecting a bank press OK SAVE The display will print LOADED If you want to stay in this menu press the UP DOWN keys and to exit the MENU BACK button Option FACTORY set default settings in the currently active bank Press the OK SAVE On display will print RESEIED If you want to stay in this menu press the UP DOWN keys and to exit the MENU BACK button OK SAVE SH UP Q Se MENU BACK DOWN Bi Menu Settings NOTES Sams elektronik doo e Sams sams rs e www sams rs DAC
10. clared characteristics of the product are changed 2 Ifthe goods are not delivered as specified with the contract the consumer has the right to request from the manufacturer service provider to eliminate the lack of conformity without charge repair or replacement or to request an appropriate price reduction or terminate the contract 3 Any repair or replacement must be made within a reasonable time without significant inconvenience to the consumer taking into account the nature and the purpose for which the consumer has purchased the product 4 The consumer has the right to terminate the contract if he can realize the right to repair or replacement or if the manufacturer servicer has not completed repair or replacement within a reasonable time or if the manufacturer servicer did not perform repair or replacement without significant inconvenience to the consumer 5 The consumer may not terminate the contract if the lack of conformity of the product is negligible 6 The product will function properly when used in accordance with the user manual 7 Period of servicing the product is 6 years from the launch on the market The product purchased outside the territory of Serbia does not fall under the terms of this warranty only to 1 year factory warranty from date of purchase TERMS OF WARRANTY 1 The warranty period begins on the date of sale referred in the invoice 2 The buyer loses the right to warranty if the defect cause fa
11. e 4 different presets 4x oversampling Complete ProcAmp adjustment Integrated Test Generator Black Color Bar Easy setup with local control and LCD display DA 12 converts SDI to composite or component analog video With both available composite and component Y Cr Cb or RGB or YC outputs this unit is ideal for converting all types of analog video Complete ProcAmp output signal controls are provided for all output formats The module is placed in the SRU 306 3RU chassis with capacity of 6 modules Also the device is available in standalone version TECHNICAL SPECIFICATIONS GENERAL INFORMATION a OO ee 005 127 E o E I T E A O 0 4 Kg e KEE module DIMENSIONS sienciesnseuciarsewsma sav neen ANNE EREE KEE 100 x 160mm Required siscainssisietinsivsinisnisiveinn SRU rack frame back panel ADCV 8 Delivery includ s ccsccscssseseeeeeeeeeees device user manual DIGITAL INPUT SEN ater ian 1 BNC female IGM AN NVDO aa Serial digital SMPTE 259M STEE ee 75Q Ile e 800mV 10 DIGITAL OUTPUT Kin ee 1 BNC female 2 Signal WDC reegen Serial digital SMPTE259M SHEET 75Q Jitter lt 0 2UI Tipical 0 1UI Color Bar 10Hz filter mode SVE I eege 800mV 10 ANALOG OUTPUT NUMbeEr sassen 3 YUV RGB YC CVBS BNC female ei Lu eE ee 75Q OUTPUT PERFORMANCE BIL TESOIMON saranideuavaxedavacrneonwssiveniusaives 10 12bit processing SEENEN Self adjusting POWER e UE et 2 x 12V AC POWE EE SW TEMPERATURE
12. ed by the manufacturer must check the device after completion of service 24 Allow a free rack unit 1RU above and below the device for ventilation or put rack fan under the device TECHNICAL SUPPORT AND SERVICE Sams elektronik has made every effort to ensure that the equipment works in perfect condition In the event that problems that occur can not be resolved or if you have any questions regarding this equipment or information about other products produced from Sams elektronik contact your local sales representative or call Sams elektronik directly through one of the ways listed below Sales 381 11 3806 254 Technical support 381 11 2402 212 Service 381 11 4056 051 Email Sales sasa sams rs Technical support and service sams sams rs Web site www sams rs Address SAMS ELEKTRONIK doo 48 Zivka Davidovica st 11050 Belgrade Serbia 4 Sams elektronik doo e Sams sams rs e www sams rs DAC Gleef elektronik Co nve rte rs TABLE OF CONTENTS Description Page UNPACKING AND INSTACLATION EE 6 RSR LC Le 6 REMOVAL AND STOR EE 6 SGP TO IN BEE 7 MODULE INSTALATION IN SRU RACK FRAMES cccceccceseeeseeeeeeeataeataeaeaeasasaeeeeeeeeeesenenees 9 PACK EE 11 SRU REAR SIDE eebe 12 PCB WITH THE LAYOUT OF 2 OST VR 13 INSTALLATION gea 14 THE DEVICE FUNCTIONS E 15 ERRORS WITH CONNECTIVITY TREK AR 15 FACTOR RR 16 MENU ee SEEE AA E EE teaseees 16 MENG TREC Enare EEE E EE E E EEEE 17 BE PY EE 18 2 HOR
13. from the chassis For devices that are AC 230V 50Hz powered the device is supplied with power cord Use only power corde that comes with the device SRU rack frame is mounted in a 19 special purpose rack cabinets designed for this type of device Screw device with four screws Screws for fastening are not supplied with the device The device must be connected to ground A device that is not connected to the grounding does not function properly according to factory declarations and can cause adverse effects on users and other equipment Strictly comply to all steps for proper connection of devices in the system On the SRU rack frame are 3 types of mass CHASSIS MAINS and OV The factory all three are connected According to the user s needs the masses can be switched over between them injury REMOVAL AND STORAGE 1 Before dismantling the device switch off the power remove the power cord and remove all other connectors 2 Remove the four screws for fastening 3 Remove the device from rack cabinet 4 Wrap the machine in the foil to protect it from dust Package it in a box 5 The device must be stored in a room without moisture Illustration mounted device Sams elektronik doo e Sams sams rs e www sams rs DAC Sits elektronik Converters DESCRIPTION DA 12 SDI to multiformat analog converter Broadcast quality 12 10bit processing Converts SDI to YUV RGB CVBS or YC Digital output Sav
14. gh voltage In poor conditions the user may be exposed to shock The symbol exclamation mark in a triangle is to alert the user to comply by the terms of use in user s manual which is supplied with the device CLASS I DEVICE Grounding is connected to the chassis of the device The power supply is protected with fuse against overload A DECLARATION OF CONFORMITY for product SRU RACK FRAME WITH POWER SUPPLY PSU 212 WITH CORRESPONDING MODULES AND BACK CONNECTORS The product is designed and manufactured according to the following regulations Electromagnetic Compatibility Directive EMC Low Voltage Directive ELV Documentation confirming statements can be obtained on written request for review DAC Sams elektronik doo Sams sams rs e WWW Sais Fe 3 sda mS Converte rs elektronik WARNING TO AVOID ELECTRIC SHOCK DO NOT OPEN COVER DEVICE MAINTENANCE REQUIRES PROFESSIONAL PERSON AUTHORIZED BY THE MANUFACTURER 1 Read all safety and operating instructions before using the device 2 Keep all safety and operating instructions 3 Follow the instructions from the user manual 4 Do not upgrade device except in the case advised by the manufacturer 5 Do not use the device in the presence of water and or moisture 6 7 8 9 Do not pour water or moisten the device with any type of liquid Openings on device are provided for ventilation Do not block air flow through the ventilation openings
15. ilure from not following the user manual instructions improper installation comes to mechanical damage during use repairs and modifications by unauthorized persons installation of non genuine spare parts and if the buyer does not comply with all warnings listed in the user manual 3 The warranty is voided if the device is damaged during the disturbances from the environment natural disasters floods hail etc suffered an electric shock or lightning strike IMPORTANT NOTES 1 Be sure to thoroughly read the user manual If you have any doubts about the instructions contact the technical support of the manufacturer 2 Before contacting for technical help please make sure that are provided with all necessary conditions for normal operation 3 If the malfunction or defect in the device does not eliminate within a reasonable time from the date of failure the warranty period shall be extended for as many days as the unit is in service 4 For all maintenance interventions shall solely be authorized services listed in this Warranty Certificate 2 Sams elektronik doo e Sams sams rs e www sams rs DAC sda mS elektronik Co nve rte rs SAFETY WARNINGS FOR SRU RACK FRAME UPOZORENJE IMPORTANT SAFEY ea A WARNING DOK eao NAPONOM eg CAUTION r TO AVOID RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THE UNIT TO MOISTURE OR RAIN EEE DON AOE HAZARD The symbol lightning in a triangle is to alert the user to the presence of hi
16. nce you have selected the option press the MENU BACK button Option is temporarily saved 9 SHARPNESS This menu is used to adjust the sharpness of the video signal Sharpness in the range of 4 dB to 4 GB in step at 0 5 The factory setting is 0 dB Select by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN F i B sy Menu Sharpness Once you have selected the option press the MENU BACK button Option is temporarily saved 20 Sams elektronik doo e Sams sams rs e Www sams rs DAC SATS Converters elektronik 10 YC DELAY This menu is used to set the delay luma and chroma part of the video signal Options for adjusting the delay luma and chroma video signals are displayed in the table The factory setting is Y Ous C Ous Select by pressing the UP DOWN keys OK SAVE UP oF Ge MENU BACK DOWN EN Be Menu YC delay Table YC Delay Once you have selected the option press the MENU BACK button Option is temporarily saved DAC Sams elektronik doo Sams sams rs e WWW Sais Fe 21i sda mS Converte rs elektronik 22 11 SETTINGS After setup within the available menu options it is temporarily recorded in the memory The number next to Setting means that the bank is loaded into memory When the device is set select SETTING menu press the OK SAVE to open the options menu and select one of four banks to record SaveMem1 SaveMem2
17. set between the guides not metal plate 2 Locking lever mount behind the groove 3 Push the lever to lock in an upright position The module is locked 10 Sams elektronik d 0 0 e sams sams rs e www sams rs DAC Glen elektronik Co nverters BACK CONNECTORS Fix the back connector with M2 5 screw Ou lt 4 SDI INPUT O lt 4 SDI OUTPUT ADCV 8 Oe lt 4 ANALOG OUTPUT sn OPTIONS f 1 CVBS amp YC ut O lt ANALOG OUTPUT 2 YUV d 3 RGB S Om lt 4 ANALOG OUTPUT SAMS Electronics www sams co yu Fix the back connector with SE Km M2 5 screw DA 12 Be sure to install a protective pad before installing the back connectors DAC Sams elektronik doo e Sams sams rs e www sams rs 11 Glen elektronik Converters Place the back connector Fix the back connector with M2 5 screw SRU REAR SIDE Rear side view 1 Mass 2 Power switch 3 The socket 4 Connections for back connectors DANGER DO NOT INSERT SHARP METAL OBJECTS OR FINGERS INTO THE SPACE BEHIND THE POWER PANEL HIGH VOLTAGE did THE SIGN LIGHTNING IN A TRIANGLE IS TO ALERT THE USER TO THE PRESENCE OF LIFE THREATENING HIGH POWER LABEL IS PLACED NEXT TO POWER PANEL 12 Sams elektronik d 0 0 e sams sams rs e www sams rs DAC sda mS elektronik Co nve rte rs PCB WITH THE LAYOUT OF ELEMENTS LILI DA 12 Trimmers to control the level of the video signal IT CVBS
18. sing the UP DOWN keys war UP on de i B MENU BACK DOWN Sa Menu Error mode Once you have selected the option press the MENU BACK button Option is temporarily saved 6 LUMA LEVEL This menu is used to adjust the contrast This is achievable by scaling Y luma signals controlled by the user Control is allowed in a range of 0 to 200 The factory setting is 100 Select an option by pressing the UP DOWN keys OK SAVE um O AR MENU BACK DOWN ga ge Menu Luma level Once you have selected the option press the MENU BACK button Option is temporarily saved DAC Sams elektronik doo Sams sams rs e WWW Sais Fe 19 sda mS elektronik Converters 7 COLOR LEVEL This menu is used to adjust the color level This is achievable by scaling Cr and Cb signals controlled by the user Control is allowed in a range of 0 to 200 The factory setting is 100 Select by pressing the UP DOWN keys OK SAVE UP MENU BACK DOWN p 7 i a i Menu Color level Once you have selected the option press the MENU BACK button Option is temporarily saved 8 PEDESTAL Pedestal is controlled by adjusting the level of the luma part of the video signal Pedestal is in the range of 7 5 IRE to 15 0 IRE with a step at 0 5 The factory setting is 0 0 IRE Select by pressing the UP DOWN keys OK SAVE UP opg MENU BACK DOWN Te Menu Pedestal O
19. unted Circuit Breaker Delivery includes evice power corde user manua Gemeng INPUT Dene re SEI A A E 5 40 C NOMEN Soa 1 BNC female Operating CC 0 50 C se EE Serial digital SMPTE 259M ein eu E e 75Q SII UG NOV KE 800mV 10 BLOCK DIAGRAM DIGITAL OUTPUT ssi gt OLI Number 1 BNC female aol ltr eelst Ce Serial digital SMPTE259M e RECLOCKER D A HD kaa SEENEN 75Q gt KIRE Jitter lt 0 2UI Tipical 0 1UI Color Bar 10Hz filter mode ANALOG 2 EE 800mV 10 OUT ANALOG OUTPUT NUMDEP ccceceeneeeeees 3 YUV RGB YC CVBS BNC female STEUER 75Q OUTPUT PERFORMANCE lee lei bininenminseoamiernumuereuctass 10 12bit processing SEELEN Self adjusting ORDERING INFORMATION Code Name Description 005 111 DA 12s DAC Sams elektronik d 0 0 e sams sams rs e www Sams rs DAC Glen elektronik Co nverters MODULE INSTALATION IN SRU RACK FRAMES On the front side of rack frame unscrew the screws Open the door Make sure that the module is set to the correct place in relation to the back connector BEFORE INSTALLING OR REMOVING THE MODULE FROM SRU ALWAYS TURN OFF THE POWER Lock module with lever to the position NOTE NEVER PLACE MODULE TO PLACE OF THE POWER SUPPLY MODULE WARNING FOR POWER SUPPLY ONLY The label that indicates the place for power supply module DAC Sams elektronik doo e sams sams rs e www sams rs 9 Glen Co nverte rs elektronik 1 The module
Download Pdf Manuals
Related Search