long-range wireless weather station with in-out thermo
Contents
1. 2 Position the remote unit and the main unit within effective 8 BEFORE YOU BEGIN transmission range In usual circumstances the effective range INSTALLING THE TABLE STAND is up to 100 meters Before operation plug a 3 Though the remote unit is weather proof it should be placed the detachable table stand into the display unit as shown away form direct sunlight rain or snow BATTERY INSTALLATION MAIN UNIT 1 Gently open the battery compartment door as shown 2 Insert four 4 pieces of UM 3 or AA size batteries in accordance with the polarities shown 3 Close the battery compartment door BATTERY AND CHANNEL INSTALLATION NOTES ON OPERATION REMOTE UNIT For best operation The remote thermo hygro sensor unit uses two 2 UM 4 or 1 Insert batteries for the main unit first Then proceed with AAA size batteries inserting the batteries for the remote unit 8 Follow these steps to install replace batteries Wall Mount Table Stand 1 Remove the screws on the battery compartment 2 Select the channel number on the CHANNEL slide switch 3 Select the temperature display unit on the C F slide switch Press the corresponding SNOOZE LIGHT button or stand button once The backlight will be activated for 5 seconds 4 Insert the batteries strictly according to the polarities shown therein SETTING TH2. Acts as the SNOOZE LIGHT BUTTON when attached to the display unit C _CONTROL BUTTONS SIDE PANEL C1 amp C2 UP A amp DOWN BUTTONS Increase or decrease in the value of a setting respectively CONTROL BUTTONS BACK PANEL D1 D2 BATTERY COMPARTMENT Accommodates four 4 pieces of UM 3 or AA size batteries HISTORY BUTTON Displays the barometric reading for the last 24 hours or enter the altitude compensation setting 8 D3 mb hPa inHg SLIDE SWITCH Selects between mb hPa or inHg pressure unit display D4 C F SLIDE SWITCH Selects between Centigrade C or Fahrenheit F temperature unit display D5 RESET BUTTON Resets the unit by returning all setting to their default values FEATURES REMOTE THERMO HYGRO SENSOR THGR228N a Two line LCD Displays the current temperature and humidity monitored by the remote unit b LED indicator Flashes when the remote unit transmits a reading ce C F slide switch Selects between Centigrade C and Fahrenheit F d Channel slide switch g Designates the remote unit Channel 1 Channel 2 or Channel 3 e RESET Returns all settings to default values f Battery compartment Accommodates two 2 pieces of UM 4 or AAA size batteries Battery door Wall mount holder Supports the remote unit in wall mounting Removable table stand For standing the remote unit on a flat surface
3. at Channel 1 remote sensor falls to or below 2 0 C the pre alarm will be triggered For example if the daily alarm is set to go off at 7 00 am and the pre alarm operating time interval is set to 45 minutes the pre alarm will start to operate at 6 15 am 45 minutes before 7 00 am The Pre Alarm icon will flash and the backlight will be turned on for 5 seconds An alarm sound will also go off for 2 minutes as that of the daily alarm and the snooze function will also be activated if the SNOOZE LIGHT button or stand button is pressed Note The daily alarm will NOT function until the next day if the pre alarm has been triggered beforehand Deactivation of the alarm function will disable the pre alarm feature automatically NOTE ON REMOTE READINGS Once batteries are in place in the remote unit it will start transmitting samplings at 40 second intervals If no signals are received when the remote sensor display is selected will be displayed To force the main unit to search for remote sensor signals press MEMORY and CHANNEL simultaneously If that fails check that the remote sensor is still in place Make sure the transmission is within range and the path is clear of obstacles and interference Repeat this procedure whenever you find discrepancies between the display on the main unit and the display on the remote sensor CHECKING INDOOR AND REMOTE TEMPERATURES amp HUMIDITIES To display the indoor and out
4. 0 C 4 0 F to 140 0 F 5 0 C to 60 0 C 23 0 F to 140 0 F 0 1 C 0 2 F Display range Proposed operating range Temperature resolution Relative Humidity measurement 25 to 95 RH at 25 C 77 F 1 RH Measuring Range Humidity Resolution Barometric Pressure measurement 795 to 1050mb hPa 23 48 to 31 01 inHg Pressure measuring range Power Main unit uses four 4 UM 3 or AA 1 5V batteries 25 RH to 95 RH at 25 C 77 F 13 Remote sensing unit uses two 2 UM 4 or AAA 1 5V batteries Weight Main unit 300gm without battery Remote sensing unit 63gm without battery Dimensions Main unit 195 L x 105 W x 77 T mm Remote sensing unit 92 L x 60 W x 20 T mm CAUTION The content of this manual is subject to change without further notice The technical specifications of this product are subject to change without notice Due to printing limitation the displays shown in this manual may differ from the actual display The contents of this manual may not be reproduced without the permission of the manufacturer 8 EC DECLARATION OF CONFORMITY This product contains the approved transmitter module TX 01 and complies with the essential requirements of Article 3 of the R amp TTE 1999 5 EC Directives if used for its intended use and that the following standard s has have been applied Efficient use of radio frequency spectru
5. E CLOCK AND 5 Replace the battery compartment door and secure its screws CALENDAR Replace the batteries when the low battery indicator of the 1 Press and hold MODE button for three seconds The 12 hr particular channel lights up on the main unit value will flash Use the A or buttons to make a Note that once a channel is assigned to a remote unit you can selection between 24 hour display or 12 hour display only change it by removing the batteries or resetting the unit 2 Press MODE button again the hour will flash Use the A or button to enter the hours Holding down either the LCD AND KEY PANEL BACKLIGHT up or down position will increase or decrease the value rapidly 3 Press MODE button again to confirm Repeat the above steps to set the minute year day month or month day display format month day and language for day of week respectively For easy viewing in the dark this unit is featured with backlight function on the LCD display as well as on the front key panel Also this unit is specially designed so that the backlight can be operated differently no matter it is wall mounted or being put on the table 4 Press MODE button to confirm and exit the settings 5 For the language for day of week you can select E for English D for German F for French I for Italian or S for Spanish The day of week can be expressed as an abbreviation in five different languages The languages and their selec
6. LONG RANGE WIRELESS WEATHER STATION WITH IN OUT THERMO HYGROMETER MODEL BAA898HG USER S MANUAL INTRODUCTION Congratulations on your purchase of the BAA898HG Long Range Wireless Weather Station with In Out Thermo Hygrometer This unit is an all in one weather forecasting device which has multiple weather related functions Also with an internal antenna the reception range of this unit can be up to 100 meters In addition to indoor temperature and humidity by means of wireless remote thermo hygro sensor it can simultaneously monitor temperatures and humidities in up to 3 remote locations The unit will show temperature and humidity trends as well as record maximum and minimum temperature and humidity readings As part of the weather forecasting function the unit has a built in barometer that displays atmospheric pressure Using kinetic movement graphic illustrations the unit displays atmospheric pressure trends and displays forecasts as sunny partly cloudy cloudy rainy and snowy Other features of BAA898HG include LCD and key panel backlight rotatable display unit for multi angle viewing and a Daily crescendo alarm and Pre alarm function with an eight minute snooze function No wire installation is required between the main and remote units as this unit operates at 433 MHz FEATURES MAIN UNIT A4 AS LCD DISPLAY Al WEATHER FORECAST WINDOW Graphically illustrates a weather forecast Indicat
7. door temperature and humidity readings press the CHANNEL button to toggle among the indoor Channel 1 2 and 3 displays The temperature can be shown in Centigrade C or Fahrenheit F Select the appropriate reading by using the C F slide switch located in the battery compartment Slide the switch to C for Centigrade or F for Fahrenheit If the reading goes above or below the specified amounts the display will show a flashing HHH or LLL This unit has an auto scan function that can sequentially display the indoor and remote readings To activate this function press and hold the CHANNEL button for 3 seconds To deactivate press the CHANNEL button again NOTE ON C AND F The outdoor temperature display on the main unit is dominated by the selection on the C F slide switch of the main unit Whatever the display unit of the remote sensor is it will only apply to the remote sensor itself and the temperature will be automatically converted to the chosen one of the main unit MAXIMUM AND MINIMUM TEMPERATURES amp HUMIDITIES The maximum and minimum recorded temperatures and humidities will be automatically stored in memory To display them press MEMORY Press MEMORY again to alternate between the maximum minimum and current readings The respective MAX or MIN indicator will be displayed To clear the memory press MEMORY and hold for three seconds The maximum a
8. ery compartment If you want to check the pressure history for a particular hour during the past 24 hours press the HISTORY button Each press on the button will go back by an hour Holding down the button will increase the value rapidly LOW BATTERY INDICATION When it is time to replace batteries the respective low battery indicator amp will show up when the corresponding channel is selected The battery level of the main unit is shown on the Weather Forecast Window when it is running low 11 As for the remote unit it comes with a wall mount holder and a removable stand Use either to hold the unit in place Wall Mount Table Stand HOW TO WALL MOUNT OR USE THE TABLE STAND MAIN UNIT The unit can be wall mounted using its recessed screw holes or placed on a flat surface using the detachable table stand 8 Wall Mount Table Stand Gently plug in the table stand as shown HOW TO RESET THE UNIT The RESET button allows you to return all settings to factory values Accessing the slot is required only when the unit is not operating in a favorable way such as in the rare case of a malfunction The RESET slot is located inside the battery compartment door To use the button 1 Open the battery compartment door 2 Place a blunt stylus into the hole and press 3 Close the battery compartment door 12 MAINTENANCE When handled proper
9. es trends in atmospheric pressure Indicates when main unit battery is low TEMPERATURE WINDOW Displays current minimum or maximum indoor and remote temperature Indicates temperature trend HUMIDITY WINDOW Displays current minimum or maximum indoor and remote humidity Indicates humidity trend Displays the Comfort Level Indicates when the battery of the remote sensor is low ATMOSPHERIC PRESSURE WINDOW Displays the current or historical last 24 hours barometric reading TIME DATE ALARM WINDOW Displays the current time date day month and year daily alarm or Pre alarm function B CONTROL BUTTONS FRONT PANEL B1 B2 MODE BUTTON Changes the display mode of the clock and alters time date setting BUTTON Displays the daily alarm time and Pre alarm time period or changes the corresponding alarm time ca o 02 z S aa IG nt B4 woe pae nate oawe ic B3 B4 B5 B6 MEMORY BUTTON Displays minimum and maximum temperature and humidity readings and erases memory data CHANNEL BUTTON Displays the temperature and humidity readings of the indoor or remote sensor SNOOZE LIGHT BUTTON Activates the snooze function or turn on the backlight DETACHABLE TABLE STAND SNOOZE LIGHT STAND BUTTON
10. ly this unit is engineered to give you years of satisfactory service Here are a few product care instructions 1 Do not immerse the unit in water If the unit comes in contact with water dry it immediately with a soft lint free cloth Do not clean the unit with alcohol containing detergent abrasive or corrosive materials Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit Do not subject the unit to excessive force shock dust temperature or humidity Such treatment may result in malfunction a shorter electronic life span damaged batteries or distorted parts Do not tamper with the unit s internal components Doing so will terminate the unit s warranty and may cause damage The unit contains no user serviceable parts Only use new batteries as specified in this instruction manual Do not mix new and old batteries as the old batteries may leak Read this instruction manual thoroughly before operating the unit SPECIFICATIONS Main unit Indoor Temperature measurement Proposed operating range 5 0 C to 50 0 C 23 0 F to 122 0 F Temperature resolution 0 1 C 0 2 F Relative Humidity measurement Measuring Range Humidity Resolution 1 RH Remote unit RF Transmission Frequency 433 MHz No of Remote unit Up to 3 units RF Transmission Range Up to 100 meters Data sensing cycle around 40 seconds Temperature measurement 20 0 C to 60
11. m Article 3 2 of the R amp TTE Directive applied standard s EN 300 220 1 2 3 1997 Electromagnetic compatibility Article 3 1 b of the R amp TTE Directive applied standard s ETS 300 683 1997 Safety of information technology equipment Article 3 1 a of the R amp TTE directive applied standard s EN 60950 1997 Additional information The product is therefore conform with the Low Voltage Directive 73 23 EC the EMC Directive 89 336 EC and R amp TTE Directive 1999 5 EC appendix II and carries the respective CE marking VS Villingen Germany August 2001 Gerhard Preis R amp TTE Representative of manufacturer 14 C 0682 RTTE Compliant Countries All EC countries Switzerland CH And Norway GD
12. nd minimum recorded readings will be erased Subsequently if you press MEMORY after the memory 8 has been erased the maximum and minimum readings will have the same values as the current ones TEMPERATURE amp HUMIDITY TREND The temperature and humidity trend indicator shows the trend of temperatures and humidities collected at that particular sensor Three trends rising steady and falling will be shown Arrow indicator A Temperature Trend Arrow indicator Falling Humidity Trend Falling ATMOSPHERIC PRESSURE The atmospheric pressure arrow indicator will indicate if the atmospheric pressure is increasing remaining stable or decreasing Arrow indicator Pressure Trend WEATHER FORECAST The unit is capable of detecting atmospheric pressure changes Based on collected data it can predict the weather for the forthcoming 12 to 24 hours The effective range covers an area of 30 to 50 km NOTE 1 The accuracy of a general pressure based weather forecast is about 70 to 75 2 The weather forecasts from this unit are predictions that cover the next 12 to 24 hours It may not necessarily reflect the current situation 3 The Sunny icon as applies to night time implies clear weather 10 COMFORT LEVEL INDICATORS The comfort level indicators COM WET or DRY will tell you if the current environment is comfortable too wet or too d
13. on expect MEMORY amp CHANNEL buttons If the SNOOZE LIGHT button or stand button is pressed the snooze function will be triggered The alarm sound will stop and the alarm on icon will blink for eight minutes After that the alarm will go off again To deactivate the SNOOZE function press the button PRE ALARM FUNCTION FOR CHANNEL 1 REMOTE SENSOR The alarm function also has a pre alarm feature which can alert the user before the preset alarm time when weather condition changes This pre alarm function applies to Channel 1 Remote Sensor only To enable this function 1 First activate the alarm function Then enter the Pre Alarm mode by pressing the button twice The PRE AL icon will be displayed 2 Press and hold the button for 3 seconds to set the operating time interval for this pre alarm function Use the A or button to select from the 4 time intervals 15 30 45 or 60 minutes 3 Press the button to confirm and exit The pre alarm function will be enabled automatically which is indicated by the appearance of the symbol 4 To disable this function press the button in the Pre Alarm mode The symbol will disappear and will appear to indicate disable of this function The pre alarm will operate during the selected time interval before the daily alarm time During the pre alarm operating period if the temperature recorded
14. ry The comfort indicator will appear on the display when the following conditions are satisfied Indicator displays on the unit Temperature Range Humidity Range Shows that the Current Environment 20 C to 25 C 68 F to 77 F 40 RH 70 RH Ideal range for both relative humidity and temperature 5 C 50 C 23 F 122 F OVER 70 RH Contains excess moisture 5 C 50 C 23 F 122 F Below 40 RH Contains inadequate moisture Indicator Less than 20 C 68 F or More than 25 C 77 F 40 RH to 70 RH No comment HOW TO CHECK THE BAROMETRIC PRESSURE HOW TO WALL MOUNT OR USE THE TABLE STAND REMOTE UNIT The current and historical barometric pressure is shown on the atmospheric pressure window For monitoring the local barometric pressure reading 0 meter preset value should be selected for the altitude setting For monitoring the Sea Level barometric pressure reading at certain altitude the local altitude should be selected as the altitude setting To set the altitude press and hold HISTORY button to enter the altitude compensation setting mode Use the A or V button to select from 100 to 2500 meters whichever appropriate Press HISTORY button to confirm and exit The atmospheric pressure can be displayed in mb hPa or inHg The pressure unit is selected on the atmospheric pressure slide switch inside the batt
15. ted abbreviations for each day of the week are shown in the language chart below Day of the week Tuesday Wed Thursday Friday Saturday Sunday peer Ean German 1 i French L Italian mAN Spanish Note When changes are made to the minute the seconds will start from zero SETTING THE ALARM To set the Alarm 1 Press button to display the daily alarm time the icon AL will be displayed 2 Press and hold for three seconds and the value for the hour will flash 3 Press A or buttons to make changes to the alarm hour 8 setting 4 Press and the minute will flash Enter the value for the minute by using A or buttons 5 Press to exit The alarm will be automatically activated The ALARM ON icon is shown and the alarm will active at the specified time To deactivate the daily alarm function press the button when the alarm time is displayed The ALARM ON icon will disappear and will be displayed To activate press the amp button to display the alarm time again ALARM AND SNOOZE FUNCTION When the daily alarm goes off the backlight will be on for five seconds and the alarm on icon will flash Initially the active alarm will have a gentle sound The intensity will increase in three stages Without interruption the unit will alarm for 2 minutes To stop the alarm sound press any butt
Download Pdf Manuals
Related Search