Splashproof Wireless Speaker with Speakerphone
Contents
1. NOTE The unit must be powered and linked to a Bluetooth phone to receive a call When a call is received playing music is muted to hear the ring tone Press the GY Talk Bluetooth Play Pause Button to answer the call or press the Power End Call Button to ignore it For call waiting function use phone controls on your device When a call is completed press the Power End Call Button to end the call and resume previous function Playing Audio via Aux In l Connect one end of a 3 5mm audio cable not included to the Aux in jack on the left side of the unit and connect the other end to the headphone or line out jack on your audio device Press the Power Button on the unit to turn it on 3 Power on the audio device and use the controls on the device to play or pause audio and navigate tracks Press the or Button to adjust the system volume You can also adjust volume on your device When done listening press the Power Button to turn the unit OFF Remember to turn off your device too NOTE Make sure no Bluetooth device is playing when you want to hear Auxin or you will hear Bluetooth instead of Aux in Using the iBT3 Os SS al z S j O Mobile Phone PC Tablet Game Devices iPod Laptop MP3 MP4 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the direc2. iBT3 Splashproof Wireless Speaker OC with Speakerphone E CHARGE BEFORE USE instruction manual Questions Contact Customer Service at 1 800 288 2792 iBT3 Introduction Thank you for purchasing the iHome iBT3 This product is designed to provide high quality wireless sound for your iPad iPhone iPod computer PDA or other Bluetooth audio device This instruction booklet explains the basic operation and care of the unit Please read it carefully and keep for future reference IMPORTANT INFORMATION ABOUT SPLASH RESISTANT USE For proper splash resistant operation make sure the seal on the left side of the unit is completely flush with the unit by pressing along the entire edge of the seal until it is completely and securely in place e The unit is IPX4 rated meaning it will repel a stream of water for up to 5 minutes e DO NOT immerse the unit in water e Make sure seal and surrounding surfaces are completely dry before opening seal to prevent moisture from damaging the internal electronics Keep seal free of dirt sand or other objects that can interfere with proper sealing If for any reason the seal is not making a tight seal water may enter the unit e DO NOT clean unit with oily soaps or use chemicals or solvents Clean with damp cloth Table of Contents Included Meet Your iBT3 Status indicators 000 cccccceeccececceeeeceeseeeececessceeeceessreteeeeesseeeees 1 4 Getting Started Cha
3. 3 Pairing is the setup process fo introduce your Bluetooth capable device to the iBT3 Once your device is paired the iBT3 can recognize it and you can play your audio through it 1 Make sure your Bluetooth device is fully charged Turn on your Bluetooth device and make it discoverable by turning on Bluetooth mode check in Options or Settings l 2 Press the amp Y V Power Button to turn on the iBT3 The first time the unit is powered on it will 5 enter auto pairing mode and attempt to connect to a Bluetooth device Otherwise follow step 3 to begin pairing 3 Press and hold the ESTalk Pairing Play Pause Button on the right of the unit for 2 seconds The unit will beep twice and the status indicator LED will flash blue indicating the unit is in pairing mode 4 iHome iBT3 should appear in your device s Bluetooth menu If Not Paired Not Connected or similar message appears select iHome iBT3 to connect it If prompted for a passcode enter 1234 on your device s keypad J Sattngs Buatooth lt Settings Bluetooth f E O oe E S Se MARE PHONE vrier i MAME PRONE VYSIEL E Bluetooth gt Biuetootn ere ic beses vewces oa For iPhone iHome iBT3 Ca i iHome iBT3 acted CI Sas gt iHome it 5 5 If pairing is successful a tone will sound and the Bluetooth indicator light will glow solid indicating the iBT3 is ready to play music There should also be an indication on your
4. ck that unit is fully charged e Make sure your device is properly paired with the iBT3 e Make sure the Power is ON Unit doesn t respond locked up or frozen If the unit does not respond insert the end of a paperclip or similar into the Reset Button located under the splash proof cover to reset the unit Resetting Bluetooth If Bluetooth function is not operating properly you may wish to reset Bluetooth To do so press and hold the Power Button for 10 seconds You will hear a long high tone You will need to re pair your paired devices Trouble pairing device computer with iBT3 Bluetooth implementation varies depending on your device s hardware and operating system Please see our website for updates on pairing e Make sure you have the latest firmware for your device e Make sure your device is working properly Check your device s manual for details on Bluetooth pairing and linking e When you power ON the speaker it will automatically link with the last previously paired Bluetooth device if the device is still within range approx 30 feet To pair with a different device press and hold the ES Talk Pairing Play Pause Button for 2 3 seconds For further information and to see the latest instructions visit www ihome com support 12 Limited 1 Year Warranty iHome Products a division of SDI Technologies Inc hereafter referred to as SDI warrants this product to be free from defects in workmanship and materials under nor
5. device If no device is successfully paired within 3 minutes the iBT3 will default to previous mode Once the iBT3 is paired to a device it will attempt to autolink when the device is within range about 30 feet 6 F Using the iBT3 When you power ON the speaker it will automatically link with the previously paired Bluetooth device as long as that device is still within range approx 30 feet To pair with a different device follow steps 1 4 under Pairing Your Device on previous page Pairing with a Different Device Playing Audio Via Bluetooth 1 Press the Power Button to turn on the unit The status indicator will glow solid blue when a linked device is in range and detected You can then listen to audio streamed wirelessly from your paired iPad iPhone iPod or other Bluetooth device 2 Press the Talk Pairing Play Pause Button to play audio from your device Press again to pause play and once more to resume play When Bluetooth audio is active the status indicator will glow solid blue 3 Use menu and track controls on your Bluetooth device to navigate tracks 4 Press the or Button to adjust the iBT3 volume A confirmation fone will sound when minimum or maximum volume is reached You can also adjust volume on your device 5 When done listening press the Power Button fo turn the unit OFF Remember to turn off your device too Using the iBT3 Speakerphone Operation
6. he party responsible for compliance could void the user s authority to operate the equipment e NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help CAN ICES 3 B NMB 3 B The device meets the exemption from the routine evaluation limits in section 2 5 of RSS 102 and compliance with RSS 102 RF exposure users can obtain Canadian information on RF exposure and compliance QDID BO21180 Troubleshooting Unit doesn t respond no power e Che
7. mal use and conditions for a period of one 1 year from the date of original purchase Should this product fail to function in a satisfactory manner it is best to first return it to the store where it was originally purchased Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period SDI will repair or at its discretion replace this product without charge This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service If service is required please call Customer Service at 1 800 288 2792 to obtain a Return Authorization Number and shipping instructions Disclaimer of Warranty NOTE This warranty is valid only if the product is used for the purpose for which it was designed It does not cover i products which have been damaged by negligence or willful actions misuse or accident or which have been modified or repaired by unauthorized persons ii cracked or broken cabinets or units damaged by excessive heat iii damage to digital media players CD s or tape cassettes if applicable iv the cost of shipping this product to the Factory Service Center and its return to the owner This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser In no event will SDI or any of its affiliates contract
8. ors resellers their officers directors shareholders members or agents be liable to you or any third party for any consequential or incidental damages any lost profits actual exemplary or punitive damages Some states do not allow limitations on implied warranties or exclusion of consequential damages so these restrictions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Your acknowledgment and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency money order cashier s check or credit card for purchase of your SDI product 2014 SDI Technologies Inc All rights reserved Questions Visit www ihome com or call 1 800 288 2792 Toll Free iBT3 11102014 A Printed in China
9. otection Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them 6 Cleaning The unit should be cleaned only using a warm damp cloth Do not use solvents etc 10 7 Objects and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product Keep splash resistant cover free of dirt sand or objects that could interfere with a proper seal 8 Attachments Do not use attachments not recommended by the product manufacturer 9 Lightning and Power Surge Protection Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time This will prevent damage to the product due to lightning and powerline surges 10 Overloading Do not overload wall sockets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock 11 Damage Requiring Service The unit should be serviced by qualified service personnel when A the power supply cable or plug has been damaged B objects have fallen into or liquid has been spilled into the enclosure C the unit has been exposed to rain D the unit has been dropped or the enclosure damaged E the unit exhibits a marked change in performance or does not operate normally 12 Periods of Non
10. rging the unit sessenta e E a E E 5 Using Bluetooth Pairing Your Devies sruse pakonsa a E T neieeeactereute 6 Pairing with a Different Device Playing Audio Via Bluetooth cccccceeceeeeseeteeetteeesteeesteenees 7 Speakerphone Operdtion saisine e waugeed aga sevd Sateen dh teea ae R A 8 Playing Avdio VIG AUN sxscaccusterseiauce ren a ans ttandahonanceauashaantedsnya E 9 Consumer Product Salei Guide e frere enne e E la ionctaanatdadents AE GEEN 10 11 Totbleshoohngi iaee a E a E E E 12 BA ETE IDN EAEE E EE A T E A ETEN Included e iBT3 system e micro USB charging cable e carrying strap a is iBT3 system micro USB charging cable carrying strap iBT3 Meet Your iBT3 i BT3 Right Side Volume Button Power End Call Button Lanyard Loop Talk Bluetooth Pairing Volume Button Play Pause Button Reset Button insert paperclip USB Charging to reset unit Port Splash resistant Cover Auxin Jack g iBT3 Status indicator Microphone TIP On some iOS Apple devices you can view the iBT3 battery status on your device s screen When device is paired and connected look for a vertical battery icon next to the Bluetooth icon on the upper right i gt corner of the device s screen Status indicator Status Solid red LED Unit is charging Flashing red LED Unit needs charging Solid blue LED Active Bl
11. ted manner this unit has been designed and manufactured to ensure your personal safety However improper use can result in potential electrical shock or fire hazards Please read all safety and operating instructions carefully before installation and use and keep these instructions handy for future reference Take special note of all warnings listed in these instructions and on the unit 1 Water and Moisture This unit is rated iPX4 will withstand a stream of water for up to 5 minutes but should not be operated in or under water Splash resistant cover must be properly sealed before use near water e Dry unit completely before opening splash resistant cover e Do NOT open cover if wet or in a wet environment 2 Ventilation The unit should be situated so that its location or position does not interfere with its proper ventilation For example it should not be situated on a bed sofa rug or similar surface that may block ventilation openings Also it should not be placed in a builtin installation such as a bookcase or cabinet which may impede the flow of air through the ventilation openings 3 Heat The unit should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat 4 Power Sources The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance 5 Power Cable Pr
12. uetooth connection Aux mode Quickly flashing blue LED Unit is attempting to pair with Bluetooth device Slowly flashing blue LED Unit is attempting to auto link to already paired Bluetooth device Flashes red 10x every minute Using the iBT3 Tripod mount The threaded tripod mount on the bottom of the iBT3 allows you to mount the unit to a bicycle mount not included visit www ihome com to purchase for sound on the go To do so screw unit clockwise onto camera tripod mount Caution Remain aware of your surroundings and do not ride bike or operate unit in an unsafe manner Getting Started Attaching the Carry Strap A carrying strap is included with the iBT3 for easy carrying or attaching to a backpack etc To attach the strap insert the small loop through the loop channel on top of the unit then pull the large loop through the small loop 4 Using the iBT3 Charge unit before use For first time charge charge for at least 8 hours Pull back splash proof seal and connect the included micro USB cable to the USB Charging Port on the left side of the unit and connect the other standard USB plug to a computer USB AC adaptor not included or other USB power source Getting Started Charging the Unit Computer connected to working outlet Computer USB port USB AC adaptor not included at USB AC adaptor connected to working outlet Pairing Your Device Using the iBT
13. use If the unit is to be left unused for an extended period of time such as a month or longer make sure to charge the unit before storing and periodically during storage to maintain battery 13 Servicing The user should not attempt to service the unit beyond those methods described in the user s operating instructions Service methods not covered in the operating instructions should be referred to qualitied service personnel Questions Visit www ihome com or call 1 800 288 2792 Toll Free 1 iBT3 FCC IC Information FCC ID EMOIBT3 IC ID 986B IBT3 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference including interference that may cause undesired operation of the device This device complies with Part 15 of the FCC Rules operation is subject to the following two conditions 1 This device may not cause harmful interference an 2 this device must accept any interference received including interference that may cause undesired operation e Warning Changes or modifications to this unit not expressly approved by t
Download Pdf Manuals
Related Search