Lenten Reborn Card Max Version User`s Manual
Contents
1. D Apply built in PXE ROM to proceed NETCOPY PXE ROM must appear and setup as the last booting device Please make sure the Network is in good connection Unconnected Network will cause the program failure PXE Mode A is the default setting 2 3 Hotkey hint Disable Enable Enable this option will see Ctrl H message on bootup 2 4 Auto Installation Disable Enable Enable this option will auto Enter NETCOPY or Windows depends on your settings 2 5 Mouse Driver Mouse 1 Mouse 2 Disable This option allows you to enchance Motherboard compatibility Some motherboard cannot allow Mouse to run in DOS and thus cause PC hang By disable Mouse in DOS can help installation 2 6 PXE driver Driver1 Driver 2 When all hardware modes have been tried and still cannot run NETCOPY Adjust another PXE Driver might help 2 7 Hardware Detection Disable Enable Wait 20sec Enable this will check your hardware in every booting such as CPU Motherboard RAM If there is a change on these items a warning will be given 3 Express Installation 1 Turnoffthe computer and remove the casing Insert the Reborn Card into PCI Express slot Secure the computer casing Turn on the computer and insert the Reborn Card install CD to start install 2 Next you will see the menu of Install Setup Select Express Installation Custom Installation or Keep C to start Thank you for purchasing our product The software has three installation opt2. any possible conflicts Hardware Setup Turn off the computer and remove the casing Insert the Reborn Card into PCI Express slot Be careful to plug in correct direction Secure the computer casing Turn the Power on As the computer boots you will see Reborn Card NET Hardware version Vx x Press CTRL H to hardware setup on the screen Next you will see the first time installation menu If the screen does not show the first time installation menu please reboot your system and press Ctrl H to go into the Reborn Card hardware settings and change hardware mode Hardware Setup Hardware password Hardware executing mode PXE Mode B Hotkey hint Enabled Auto installation Enabled Mouse driver Mouse 1 PXE driver Driver 1 Hardware detection Disabled 2 1 Hardware Password Setting hardware password to avoid unauthorized access and change The default password is NET Password can be setup up to 10 charactors 2 2 Hardware executing mode The different hardware modes are to meet different types of computers Adjust hardware mode once the Reborn Card is not active Oo Mode A E Adjust a suitable hardware mode to meet Card s activation sequence in BIOS 0 PXE Server An additional function created for those PC which cannot support Network PXE NetPXE program is needed to run in windows on another PC in order to proceed NETCOPY PXE ROM must also be setup as the first booting device e PXE Mode A
3. be auto cleared with every re boot Only supports FAT16 and FAT 32 file systems With System Private data partition will follow the restore period of its boot partition Buffer For Instant Restoration type Maximum buffer size is 4000MB and Minimum is 50MB Default value is 3000MB Move the cursor to the selected option and adjust the size by PageUP PageDown For Backup Restoration type It requires a buffer zone that is equal in size to the protected partition The buffer zone will be automatically reserved within the remaining unpartitioned hard disk space For No Restoration type or Data partition 12 No buffer is required Note When the settings in the FDISK are saved the partition size will not be able to change Please think twice before saving and exiting 5 Install Operating System 5 1 Boot Menu After completed FDISK setup press ESC key to save and exit PC will automatically restart and will show the Reborn Card boot menu as follow 5 1 1 How to Install for DOS and Windows Move the light bar to the selected partition and follow the steps below to start OS installation 13 Note Please prepare a boot CD or Diskette and format all system and data partitions 5 1 2 For boot partition set to attribution A e Windows Operating System installation steps for Instant Restoration Partition After rebooting your computer the Reborn Card boot menu will appear showing all the partitions you setup
4. partition s Restore Function 6 Ctrl K Enters Keep Mode and saves the changes temporarily in the next boot 31
5. At that time you can choose a partition and install the operating System Follow the steps listed below Step 1 Start PC with boot CD Step 2 Select the desired partition with Ctrl Enter and login using the Supervisor Password default Password is ENTER key Step 3 Format C Step 4 Start installing desired operating system Note During installation windows will reboot several times Make sure all the install procedures are done in the Supervisor Mode Step 5 Install Reborn Card Setup Driver in Windows Make sure you are in Supervisor Mode first Step 6 Insert Reborn Card install CD in CD drive Step 7 Double click Install exe to start installation Buffer Monitor utility installed enables the user to receive status about the amount of free resources left for use by the card until a restart operation is needed e Installing other applications and programs To install other applications and programs Office 2010 etc please press Ctrl Enter to go into desired partition under Supervisor Mode to begin installation 5 1 3 For boot partition set to attribution B Operating System installation steps for lt Backup Restoration Partition gt 14 Step 1 Start PC with boot CD Step 2 Select the desired partition with Enter key Step 3 Format C Step 4 Start installing OS Step 5 Reboot computer Step 6 Select the same partition again with Ctrl B keys and login with Supervisor Password default Passwor
6. Reborn Card NET User s Manual Table of Contents Notice Before Installation iii 2 System RequirementS ii 3 l FirstInstallation a iaia licia 4 2 Hatdware Setup iiassia lune gle e SEn T E TEETE s 4 Se Express Installation votando 6 4 How to setup FDISK cee cee renerne nerne renees 10 4 1 Attribution piani alan osa 10 4 2 Names gelatiera 11 4 3 Seria alianti 11 4 4 File Syst m init iii ass 11 4 5 Restore Period wz Ac ars sila Re A 12 4 6 Burs sists O 12 5 Install Operating System i 13 5 1 Boot Menu i i i las 13 6 Option Menu iii 15 6 1 A ERE chee ERA ea ees 16 6 2 O S aA 17 G T SOMES sists ieee AAT BAMA iaia i 17 62 2 Disk Ido ci Ae ei es es 19 AS FDISK incitar pisses ee sites 19 6 2 4 Net Clone SE PUP eros 20 TF DD Clones ti NT 21 7 1 Net COPY running steps ii 22 7 2 Net Clone Logon Menu rene rnennee 22 7 3 SEND DATA acta lalla 24 7 4 SEND COMMAND i 26 8 Und e 29 Q A ere EET 30 10 About aiii aii halo 31 11 HOt iio ao uil 31 Notice Before Installation 1 Please backup important data and uninstall other similar recovery program 2 A standard partition format is necessary Using other Multi boot partition program will cause install failure 3 Please enable built in Network Card in BIOS and activate Boot ROM option to support PXE function 4 To optimize the NET card pl
7. d is ENTER key to backup the current partition s data gt Done Note To restore the Backup Restoration partition please select the partition with Ctrl R keys and login with Supervisor Password It will restore the system to its current backup 5 1 4 For boot partition set to attribution C Attribution C is no Restoration Partition In this partition the operating system installing procedure is same as if no card were installed No protection is provided under this partition Step 1 Start PC with boot CD Step 2 Select this partition with Enter key Step 3 Format C Step 4 Start installing OS Step 5 Reboot computer 6 Option Menu After complete Reborn Card installation press F10 key at the boot menu to enter Option Menu Supervisor password will be asked to enter Option Menu All the settings in this menu go into effect after saving the changes and restarting the computer 15 Please login Password Supervisor Passuord 6 1 Password PASSWORD TOOLS HDD CLONE I UPGRADE UNINSTALL ABOUT l m PASSHORD Supervisor Password Restore Passuord Backup Password GIVE Move il Modify Save amp Exit Cancel Save 16 The default Supervisor Password is ENTER key UP to 10 characters are available Press F1 will display the password The supervisor password will be used to enter lt Option Menu gt lt Supervisor Mode gt or execut
8. ease adjust the following Windows settings before installing Install exe 4 1 Make sure there is no virus in Windows 4 22 Make sure Windows has completed all update and then turn off Windows Auto Updating 4 3 Disable Anti virus program before installation Enable Anti virus program again after installation completed 44 Run Windows Scandisk and Defrag 4 5 Setup Computer Namel and Network IP or DHCP 4 6 Disable Windows Power Sleep option 4 7 Turn off System Protection and Disable ScheduledDefrag 4 7 1 Go to Control Panel gt System and Security gt System gt Advanced system settings gt System protection gt Click Local Disk C gt Click Configure gt Turn off System Protection 4 7 2 Go to Control Panel gt System and Security gt Administrative Tools gt Task Scheduler gt Task Scheduler Library gt Microsoft gt Windows gt Defrag gt Disable ScheduledDefrag Note If Windows defrag is being run again ScheduledDefrag will auto appear Please disable it one more time e For Windows 8 x fast startup option has to be turned off Go to Control Panel gt Power Options gt Click on the Change settings that are currently unavailable link to make the Shutdown options available Untick the Turn on fast startup enabled option gt Save changes http winaero com blog how to disable or enable fast startup in windows 8 1 System Requirements Pentium III and above compatible PC 80GB and above Hard Disk Mini
9. ed partition size Enter the preferred size or press PageUp PageDown to adjust 4 4 File System Choose appropriate file system for each operating system FAT32 Support Win98 ME 2000 XP 2003Server Vista FAT16 Supports Win95 NT hard disks under 8 4GB Total partition size cannot be more than 2000MB NTFS HPFS Supports WinNT4 0 Win2000 XP 2003Server Vista Win7 Win8 The boot sector of WinNT4 0 cannot be located over 2000MB Total partition size cannot be more than 4300MB Win2000 XP does not have such restriction 11 LINUX Supports LINUX file system LINUX SW Supports LINUX Swap file system 4 5 Restore Period Set up restore time for System data recovery 4 6 Disable Shuts down Instant Restore function Every The system will be instantly restored to its original state with every reboot Daily The system will be instantly restored to its original state at the first boot of every day Weekly The system will be auto restored to its original status at the first boot of every Sunday Monthly The system will be auto restored to its original state at the first boot of date 1 every month Manually Every access writes to the hard disk will be kept temporarily The system will be restored to its original status by pressing Ctrl R and the restore or supervisor password A Given date 1 31 The system will be auto restored to its original status at the first boot of a specified date Auto Clear Data partition will
10. fo PASSHORD TOOLS NET CLONE UNINSTALL SETTINGS DISK INFO SET cros Net Clone SETUP DISK INFO No Attrib Name Size MB File System Restore Period Win KP 199996 NTFS HPFS v Every Win 199996 NTFS HPFS V Every Hin8 199998 NTFS HPFS V Every DI v DI HDD Total Size 921572MB Buffer 3684 MB Free Space ane REMARK stem Partition for Instant Restoration XP Win Win8 JET a a 10 BEB Move Aaa Eat Modify E 0K El Boot Password l Save amp Exit Please refer to Section 4 How to setup FDISK 6 2 3 FDISK 19 No Attrib Name Size MB File System Restore Period Buffer MB 1 Win XP 199996 NTFS HPFS v Every 3004 Win 199996 NTFS HPFS V Every 3992 Hin8 199998 NTFS HPFS V Every 3992 HDD Total Size 921572 MB Free Space 124464 MB REMARK tem Partition for Instant Restoration XP Win Win8 stem Partition for Backup Restoration Applied to all 0S tem Partition for NOT R oration Applied to all 08 2d Da Partition Aut r for FAT16 FAT32 Private Data Partition Auto Clear FAT16 FAT32 lt Name gt MUST be same between tem Partition and Data Partition DA ff ARI Move AVERT Modify EO 0K El Boot Password To change the partition size require
11. fore transmitting Screen will show the disk information while transmitting Press FS can abort transmitting INET CLONE Sending computer Select Partition 1 A Hin XP 1 I 159151MB FAT32 JI 26471MB PC Group 81917NB 10443 88 8C 29 1F 82 D4 25 7 4 SEND COMMAND INET CLONE Sending computer Press Fl to send data Press to send command Send Command Collect ID for Wake Up On Lan e ABC 4895MB 66 56 56 48 42 CH 7 4 1 Collect ID for Wake up on LAN Record the Ethernet LAN Card ID of standby receiving computers This function is for the following two purposes 1 Auto IP utility 2 Wake up On Lan by remote control 7 4 2 Use Multicast Packet Multicast Packet is recommended to use when the network surrounding supports 7 4 3 Data Time adjustment Match the receiving computers data and time as the sending computer 7 4 4 Keyboard Lock Lock keyboards of all the receiving computers so nobody can access them during transmission 7 4 5 IP Allocate Setup Computer Name IP Address and NET COPY Group The following settings can be setup one by one manually or 26 auto allocated After completed the following settings press ESC and select Complete Setup amp Exit or select Auto Allocate to start IP allocating User ID Send Receive Identify the target and source machine Computer Name Computer Name after NET COPY Setup the sending computer name and the receiving compute
12. he hard disk drive All of the changes are permanent This Mode is only accessible from MIS or administrators To enter Supervisor Mode press Ctrl Enter when you are at the boot menu of Reborn Card The supervisor Password will be required to enter in this mode The default supervisor password is ENTER key User Mode The User Mode is where the Reborn Card is active and is governing the access writes to the partitions on the disk drive Any changes under this mode will be restored to its original settings after the PC is re booted by the preset schedule Note The relativity of Supervisor Mode and User mode is only existed when the attribution of boot partition is set to A system partition for instant recovery 4 How to setup FDISK No Attrib Name Size MB File Sustem Restore Period Buffer MB Win XP 199996 NTFS HPFS Every 3004 A Win 199996 NTFS HPFS Every 3992 A Hing 199998 NTFS HPFS Every 3992 JKIKIKIKIK HDD Total Size 921572 MB Free Space 124464 MB The Reborn Card supports multiple operating systems installed on one hard drive when using Custom Installation Each operating system is in a different physical partition allowing multi booting up to 40 partitions 4 1 Attribution 1 A System Partition for Instant Restoration Wit
13. hin this partition type all changes will be instantly restored to its original state with a simple reboot Various restore schedules are provided including every reboot daily weekly monthly a given date and manually Supports Windows XP Win7 Win8 2 B System Partition for Backup Restoration Setup this partition type you can backup data manually or restore the original data with preset schedules It supports almost all operating systems in the market 3 C System Partition for No Restoration No protection or backup function is provided for this 10 partition type Any changes done in this partition are permanent and will remain It supports almost all operating system in the market It is mainly for networking environments 4 S Shared Data Partition This partition type will be visible with every partition you choose to boot from It is Excellent for sharing data between different operating systems 5 P Private Data Partition This partition type will only be visible for the boot partition with the same name in the setup menu It will be invisible when booting from any other partitions This is excellent for constantly changing data that is exclusive to one operating system For example if the name of boot partition is WinXP then the name of its private data partition must be WinXP as well 4 2 Name Identify of the partition in Reborn Card boot menu Maximum length is 10 characters 4 3 Size Setup preferr
14. ing lt Keep gt lt Backup gt and lt Restore gt functions Please REMEMBER to write this Password down and NEVER lost it or you will need to reinstall everything 6 2 Tools 6 2 1 Settings PASSUORD TOOLS HDD CLONE UPGRADE UNINSTALL aBour SETTINGS DISK INFO SET CMOS Net Clone SETUP SETTINGS Boot Menu Show Hide Logon Hotkey Hint Show Hide Loading Timeout 3 Sec Default Select Disable Assign Bootup Partition Disable Instant Restoration Keep Mode O Disable O Enable Bootup Option BIOS CC Only Keyboard Lock on Boot Menu Disable C Enable fiuto Power Off a Save Exit l Cancel 1 Boot Menu Show Hide default Show Show boot menu Hide Do not show boot menu 2 Logon Hotkey Hint Show default Hide Show Show hotkeys on boot menu Hide Do not show hotkey 17 Ow gt A nm Co Loading Timeout Disable 3 99 seconds 3second default Disable Do not auto enter the boot partition Setup the waiting time at the boot menu After the waiting time system will auto boot to the partition that the light bar is on Default Select Disable boot partition name Disable Do not assign a default boot partition Boot Partition Name When booting the light bar will automatically select the desired partition This function can apply with Loading Timeout to auto enter the boot partition Assign Bootup Partition D
15. ions 1 Express Installation all data that is on the hard drive will be kept 2 Custom Installation all data on the hard drive will be completely deleted 3 Keep C all data on partition C will be kept all other partitions will he deleted Please backup your important data on other storage devices before the installation o Move El Selec Express Installation Custom Installation Keep C l Exit 3 4 During the installation please do not restart or power off your computer Installing t WARNING PLEASE DO NOT RESTART YOUR COMPUTER When Install completed shows up remove the install CD and press Enter key to restart the computer Install Completed Please remove install diskette and press to reboot Reboo Now Tf you install by Express Installation you will only have three seconds to press F10 to enter Setup menu and change the preferred settings After save the preferred settings reboot and press Ctrl Enter enter the Supervisor Password to enter Windows by Supervisor Mode The default password is ENTER key Once operating system is up insert Reborn Card install CD into the CD drive Double click install exe to install Reborn Card setup Please login Password Supervisor Password 6 If install by Custom Installation the system will reboot into FDISK setup menu Please refer Section 4 How to setup FDISK to complete the hard di
16. isable boot partition name Disable Do not assign a boot partition Boot partition name Pre set a desired partition to boot The light bar will not be able to move when a boot partition is assigned Instant Restoration Keep Mode Enable Default Disable Disable Shuts down Keep mode function Enable Enable Keep Mode allows users to save the changes temporarily in the next boot by pressing Ctrl K This function can only be used when the restore type is set to instant Restoration and when restore interval is set to Every time Bootup option BIOS C only BIOS the boot sequence will follow the setting in the BIOS C only Computer boots from C Enabling this setting will protect your hard disk information from being destroyed in case the Reborn Card is removed without going through the formal uninstall procedure first If the card is removed or undetected for some reason the system will warn you by beeping and the computer will be unbootable Keyboard lock on Boot Menu Enable Disable Default Disable Do not lock keyboard Enable Keyboard is locked on Boot Menu This function can be used when operating Remote Control Auto Power Off Disable default 1 60 minutes Disable Do not auto power off computer 18 1 to 60 minutes Setup the idle time of the boot menu When the boot menu reaches the predetermined time without entering any boot partition the computer will be shut down automatically 6 2 2 Disk In
17. lace new installation CD into CD Rom Press F10 gt Upgrade After it is finished the system will reboot Go into Windows in Supervisor Mode Place previous installation CD into CD Rom Run Install exe to uninstall the previous setup in Windows The system will reboot Go into Windows in Supervisor Mode again Put new installation CD in CD Rom Run Install exe to install the new driver into Windows The system will reboot one more time Finished upgrading to the new version 29 9 Uninstall PASSHORD TOOLS HDD CLONE UPGRADE UNINSTALL UNINSTALL This will uninstall the product from your computer fire you sure Save amp Exit To uninstall Reborn Card functions from this computer 1 Place Reborn Card Installation CD into CD ROM 2 In Windows double click Install exe in Supervisor Mode 2 Warning The uninstallation is completed The system will reboot 3 System reboots Press F10 during booting Input Supervisor password and select Uninstall 4 Uninstall completed You can now power off the system 30 10 About HDD CLONE UNINSTALL Thank you for using our product H H Version V1 2 Information about Reborn Card NET version 11 Hotkey 1 F10 Enters the Option Menu 2 Ctrl Enter Enters Supervisor Mode 3 Enter Enters User Mode 4 Ctrl B Executes the partition s Backup Function 5 Ctrl R Executes the
18. mum 20G of free hard disk space recommended 32G BIOS must be able to support Hard Disk size over 8 4GB 512MB of Memory One free PCI Express slot Color monitor ADAN BA MA Operating System Support Instant Restore Mode Support Windows XP Win7 Win Backup Restore Mode Support XP Win7 Win8 LINUX No Restore Mode Support XP Win7 Win8 LINUX First Installation The Reborn Card NET version may be installed three different ways Express Installation Supplies an instant restore for Windows XP Win7 Win8 operating systems All of the original data on the hard disk may be preserved The default setting after Express install is Instant Restoration by every reboot Express Installation can only be used when a Windows operating system has been pre installed on the hard drive Custom Installation Supports multi boot functions by using the built in FDISK utility Each partition may be setup with the preferred restore type and restore interval When choosing this installation type all data and partitions will be destroyed and the hard disk will need to be repartitioned and formatted Keep C By selecting this installation only data on partition C will be kept All other partitions will be deleted Note that this installation does not support Win7 and Win8 Note Before using Express installation remember to run SCANDISK and DISK DEFRAGMENTER utilities provided by Windows for best performance Also disable any anti virus programs to avoid
19. pressing F10 Step 2 F10 gt HDD CLONE gt Net COPY For Sending computer run Net Copy Select Sending then refer to section 7 2 Net Clone Logon Step 3 For receiving computers run Net COPY Select receiving Then refer to section 7 2 Net Clone Logon 7 2 Net Clone Logon Menu For Sending computer press F10 and get into Option menu Run NET CLONE and you will see the following figure INET CRONE Select Group 81917MB 10443 E BB 8C 29 1F 82 D4 7 2 1 Receiving Target computer for receiving data from Sending Computer 22 Receiving computer 7 2 2 Sending Source Computer used to send data to receiving computers Sending computer Press to finish login Press E to exit 6 z 11 12 16 17 21 22 26 27 31 32 36 37 41 42 46 23 INET CLONE Sending computer 7 3 SEND DATA INET CLONE Sending computer Send data lt Parameter data gt 24 7 3 1 Parameter data and all Partition Copies and sends all data and the Reborn Card information to receiving Computers Highly recommended for first time installation 7 3 2 Parameter data Copies only Reborn Card information to receiving computers Recommend usage Reborn Card software version upgrades 7 3 3 Partition Copy selected Partition to receiving computers Recommended usage When data of the selected Partition been updated Time saving Time saving feature Run Disk Defragmenter be
20. r name If setup the Computer Name of the sending computer to be ABC the receiving computer will be ABC1 ABC2 ABC3 after using Auto Allocate option IP Address Setup the IP address of the sending computer and receiving computers If setup the IP address of the sending computer to be 192 168 1 1 the receiving computer will be 192 168 1 2 192 168 1 3 192 168 1 4 after using Auto Allocate option NET COPY Group Group name used during login Only computers in this selected group can login Many groups can be set for separation purposes If setup the NET COPY Group to be A the receiving computer will be in the same group A after using Auto Allocate option 2T IP Allocate pce 192 168 1 181 Group 88 80 29 1F 82 D4 PC1 Option E B C 29 34 D5 E7 Auto Allocate Press Fi to enter option menu IP Allocate 192 168 1 161 Group 66 8C 29 1F 62 D4 192 168 1 162 Group 88 8C 29 34 D5 E7 Press El to enter option menu sI 7 4 6 All computer Restart Restart the standby receiving computers along with the sending computer 7 4 7 All computer Power off Power off the standby receiving computers along with the sending computers 28 8 Upgrade NAAA NA PASSHORD TOOLS HDD CLONE UPGRADE UNINSTALL ABOUT UPGRADE Please insert the disk for upgrading Save amp Exit l Cancel l Get to the Reborn Card boot Menu P
21. s you to use FDISK again in Tools menu All data in hard disk will be destroyed if FDISK is used 6 2 4 Net Clone SETUP PASSWORD HDD CLONE I UPGRADE UNINSTALL SETTINGS DISK INFO SET cmos FDISK Net Clone SETUP Net Clone SETUP fiuto Standby O Disable Enable Computer Name ser IP Address e Fe el Save amp Exit 20 A Auto Standby Disable Enable Disable Disable auto connect Enable Reborn Card auto detects the connection and allows card to search for sending or receiving computers when powering on the machine B Computer Name Computer Name after NET COPY If you leave it blank the LOGIN NAME will show while running NET COPY C Group name NET COPY Group name used during login Only computers in this selected group can login Many groups can be set for separation purposes similar to a VLAN D IP Address Local IP Address setting E IPv6 Address Reserved for future setup 7 HDDClone Net Clone allows you to maintain 200 PCs at the same time You can use this function to transfer hard drive data through a master computer to the rest computer over network PASSWORD TOOLS HDD CLONE UPGRADE UNINSTALL I ABOUT NET COPY Net COPY l IDE HDD COPY Save amp Exit Cancel Save 21 7 1 Net COPY running steps Step 1 F10 For Sending computer get to Reborn Card Boot menu enter option menu by
22. sk partitioning and press ESC key to save and exit Then you can start to install Operating System and execute Install exe in every partition Please refer Section 5 Install Operating System 7 After executing install exe you will see the following menu Option W Auto Fix Computer Name F Auto Fix IP Address ipv4 C ipv6 T KMS Server setting for Win7 8 KMS Server IP KMS Server PORT Advanced Setting Cancel 8 Enable the check box of install kernel driver and click Next to continue 9 After executing Install exe a Shadow Space tray icon will display in the Windows taskbar This Buffer Monitor utility installed enables the user to receive status of buffer left for use by the card until a restart operation is needed Shadow Space remain 3427MB 3 56 PM 7 9 2014 Re id fo When the free space is less than 200MB or less than a pre set space in advanced setting the system will warn you with a beeping sound Please save all files and restart the computer immediately or operate Restore function to release the new buffer zone 10 When you are in Supervisor Mode the system will pop up the following figure to warn you when Windows is up i NET Reminding Fi E y It s now in Supervisor Open Mode Kernel Ver v1 0 NET 64 Supervisor Mode The Supervisor Mode is where the Reborn Card is not active and is allowing full Read Write access to all partitions on t
Download Pdf Manuals
Related Search