User Manual - Violet3d.com
Contents
1. If Status LED is Blinking RED some speakers have been turned off 2 Speech sound seems to come more from back than front Repeat Learning procedure again 3 There is no sound Check connections amp source Check Mute Status Try increasing the Volume 4 If no sound in speakers with digital source make sure connector is connected with DVD player and RESET the transimitter once with the DVD player running 9 2 During Learning 1 Blinking of Red Status LED and D1 for 10 sec This indicates that the noise in the room is too loud for learning Reduce noise and start again 2 Blinking of Red Status LED and D2 for 10 sec This indicates that there is something wrong with the microphone Please call your service center 3 Blinking of all Source LED s and Red Status LED for 10 sec This indicates that microphone is not connected If this repeats Please call your service center 4 If Source LED is blinking e Learning procedure did not complete successfully Repeat the process In case error happens repeatedly call your service center 24 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 10 Caution Caution 1 To reduce the risks of electric shock do not open device No user serviceable parts inside refer servicing to qualified service personnel Caution 2 The speaker system is not intended for use by children without supervision Caution 3 The system should not be exposed to water dripping or splashing and no obje2. Mic Rods 2 Mic Wings 3 with Cable Speakers 5 Transmiter 1 Remote 1 Adapter 1 Batteries 2 Speaker Stand 5 Mic Base 1 2 2 Speaker Assembly Screw Speaker into Speaker Stand CAUTION Do not over tighten the Speaker into Speaker Stand doing this may damage the plug and sockets 2 4 Power On Subwoofer gt LED On indicating Power is ON Note Check LED is ON when connected to Power source 2 5 Power On Speakers a LED On indicating Power is ON S 2 6 Speaker Placement 2 7 Microphone Assembly Step 1 Wings with cable Step 2 Bracket Step 3 Pipe Coupler Step 4 Base 1 Insert Wing 1 2 and 3 into the Bracket in the sequence as shown in the figure 2 Insert the Cable through the Bracket Pipe Coupler and Base 3 Tighten Fix the Pipes to the Bracket Coupler and Base D lt Red pi lt Bracket Yellow Pipe ES lt Coupler Pipe Base Cable 13 3 Installation 3 1 Connect Microphone to Transmitter Connect Microphone to Transmitter 14 olo S svpc 1 5A av 28 a ce e 3 2 Microphone Placement for system characterization a Place microphone close to listening position b Wing 1 Red should point to the front to TV of the room c Height should be around 4 f
3. be liable for any special indirect incidental or consequential damages whatsoever including but not limited to loss of profits revenue or data whether direct or indirect or commercial loss for breach of any express or implied warranty on your product even if SNAP Networks has been advised ofthe possibility of such damages Some jurisdictions do not allow the exclusion or limitation of special indirect incidental or consequential damages so the above limitation or exclusion may not apply to you Duration of implied warranties Except to the extent prohibited by applicable law any implied warranty or condition of merchantability or fitness for a particular purpose on this hardware product is limited in duration to the applicable limited warranty period for your product Some jurisdictions do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you National statutory rights Consumers have legal rights under applicable national legislation governing the sale of consumer goods Such rights are not affected by the warranties in this Limited Warranty No other warranties None of the SNAP Networks dealers agents or employees are authorized to make any modification extension or addition to this warranty Contact Address Customer Care SNAP Networks Pvt Ltd 734 1st Floor 22nd Main 12th Cross JP Nagar Phase 2 Bangalore 560 078 India Mob 91 90081 01043 Email customercare snap networks
4. ARNING Risk of explosion and personal injury if batteries are replaced by incorrect type in Violet remote control Do not open mutilate or expose to conducting materials metal moisture liquid fire or heat above 54 C or 130 F Doing so may cause batteries to leak or explode resulting in personal injury Dispose of spent leaking or damaged batteries according to manufacture instructions and local laws Store away from children in a cool dry place at room temperature II Warranty Limited warranty SNAP Networks warrants that your product hardware shall be free from defects in material and workmanship for one year beginning from the date of purchase Except where prohibited by applicable law this warranty is nontransferable and is limited to the original purchaser This warranty gives you specific legal rights and you may also have other rights that vary under local law This warranty does not cover problems or damage resulting from 1 Accident lightning water fire heat abuse and misapplication or any unauthorized repair modification or disassembly 2 Improper operation or mainte nance usage not in accordance with product instructions or connection to improper voltage supply 3 The serial number is deleted defaced or altered or 4 Use of consumables such as replacement batteries not supplied by SNAP Networks except where such restriction is prohibited by applicable law Remedies SNAP Networks entire l
5. com www violet3d com 27 Contact Address Customer Care VIOLET 294 22 7th Cross Jayanagar 1st Block Bangalore 560011 Mob 91 90081 01043 Email customercare violet3d com www violet3d com For further details contact Customer Care VIOLET 294 22 7th Cross Jayanagar 1st Block Bangalore 560011 Mob 91 90081 01043 Email customercare violet3d com www violet3d com
6. cts filled with liquids such as Caution 4 To prevent fire or electric shock hazard do not expose this product to rain or moisture SAFETY WARNINGS AC DC ADAPTER WARNING To reduce risk of electric shock do not expose AC adapter to rain moisture liquid or heat sources e g radiators heat registers stoves amplifiers etc AC DC adapter is for indoor use only Do not use any other AC DC adapter with the product Do not use a damaged AC DC adapter or attempt to repair one Inspect AC DC adapter regularly for cable plug or casing damage POWER CORD WARNING Ifthe system is supplied with an extension cord or an electrical portable outlet device the extension cord or electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture Itis recommended that most appliances be placed on a dedicated circuit That is a single power outlet component which powers only that appliance and has no additional outlets or branch circuits Protect the power cord from physical or mechanical abuse such as being twisted kinked pinched closed in a door or walked upon Pay particular attention to plugs wall outlets and point where the cord is connected Do not overload wall outlets Overloaded wall outlets loose or damaged wall outlets extension cords frayed power cords damaged or cracked wire insulations are dangerous Any of these conditions could result 25 BATTERY W
7. ect Coaxial Digital Spdif Audio Signal From Source RCA S PDIF Digital Coaxial Input Line Level 3 3v Max Connect Coaxial Digital Spdif Audio Signal From Source Power Input 5vdc 1 5A Note Only Connect The Adaptor Supplied With This System 8 Remote Control Key Action Function Power Press amp Release Power On gt Standby gt Power On Source Press amp Release Source gt D1 gt D2 gt 6C gt Al gt A2 gt DI Source Press amp Release Source gt D1 gt A2 gt Al gt 6C gt D2 gt D1 Volume Press amp Release Volume gt Increase Volume Volume Press amp Release Volume gt Decrease Volume Bass Press amp Release Bass gt Increase Bass Frequencies Bass Press amp Release Bass gt Reduce Bass Frequencies Mid Press amp Release Mid gt Increase Mid Frequencies Mid Press amp Release Mid gt Reduce Mid Frequencies Treble Press amp Release Treble gt Increase Treble Frequencies Treble Press amp Release Press amp Release Treble gt Reduce Treble Frequencies Mute the system Press amp Release Unmutes the system 00000000000 0 Press amp Hold 2 sec Start learning procedure 9 Troubleshooting 9 1 During Normal Usage 1 Status LED is RED or Blinking RED
8. iability and your exclusive remedy for any breach of warranty shall be at company option to repair or replace the hardware provided that the hardware is returned to the point of purchase or such other place as SNAP Networks may direct with a copy of the sales receipt and or local warranty card Shipping and handling charges may apply except where prohibited by applicable law SNAP Networks may at its option use new or refurbished or used parts in good working condition to repair or replace any hardware product Any replace ment hardware product will be warranted for at least the remainder of the warranty period How to obtain warranty support Before submitting warranty claim we recommend you visit the support section at http www violet3d com for technical assistance Valid warranty claims are generally processed through the point of purchase during the first one year after purchase however this period of time may vary depending on where you purchased your product please check with SNAP Networks or the retailer where you purchased your product for details 26 Warranty claims that cannot be processed through the point of purchase and any other product related questions should be addressed directly to the company The addresses and customer service contact information for SNAP Networks can be found in the documentation accompanying your product and on the web at http www violet3d com Limitation of liability SNAP Networks shall not
9. icates Noise Error During Learning and D1 For 10 Sec Blinking Of Red Status LED Indicates Microphone Error During Learning and D2 For 10 Sec Blinking Of All Source LED s Indicates No Mic Connected and Red Status LED For 10 Sec 7 Connectors Description 7 1 Connectors Front Side Connector Type Signal Specs Function aux2 3 5mm Stereo Input Line Level 3 3V Max Connect Line Level stereo audio signal from audio source 7 2 Connectors Back Side Connector Signal Specs Function Mic Proprietary Specific To Violet Input Mic Level Connect Mic Input Here Care Should Be Taken While Connecting Since Connector Plugs In Only One Orientation Mic Should Be Disconnected After Learning Is Complete Caution Do not connect non Voilet MIC Input Line Level 3 3v Max Connect Line Level 5 1 Decoded Audio Signal From Source Such As Dvd Player FI gt Front Left As c Fr gt Front Right SI gt Surround Left Sr gt Surround Right C gt Center Sub gt Subwoofer FR O sk O SUB Ana Sub Out Output Line Level 3 3v Max Subwoofer Output To Connect To External Wired Active Subwoofer Note Ensure Wireless Sub woofer Supplied With System Is Switched off RCA Input Line Level 3 3v Max Connect Line Level Stereo Audio Signal From Audio Source RCA S PDIF Digital Coaxial Input Line Level 3 3v Max Conn
10. indicates that the MIC has been damaged c ERROR CASE Blinking of all source LED s and Red Status LED for 10 sec This indicates that the MIC is not connected 177 3 4 4 It will take 2 minutes to complete this process The status LED will turn Green if the process is successful a ERROR CASE If Source LED s blinking this indicates that the learning procedure did not complete successfully So repeat the process b In case above error happens repeatedly please call your service center violet SS aux 2 0 0 e Al vE uv O td T 1 Power Mute Source Status 3 5mm Stereo Jack 3 4 5 Disconnect the Mic release the wings and store in the box 4 Connectors 4 1 Front Side Connector violet Ss dub jej AI A2 DI D2 0 A 7 TR Power Mute Source Status 3 5m 18 4 2 Back Side Connector Digital 1 5 Listen amp Enjoy 6 LED Status Indicators violet Power Mute souls Status 3 5mm Stereo Jack Indicator Power On Standby Blinking Green Remote Key Pressed Orange System Muted Off System Is Unmuted Source 6C Blue Source Is Analog 6 Channel A1 Blue Source Is Auxiliary Stereo Back Panel A2 Blue Source Is Auxiliary Stereo Front Panel D1 Blue Source Is Digital 1 D2 Blue Source Is Digital 2 Status Green On System Is Ok Blinking Red Speaker Is Not Powered On Blinking Orange System Is Learning Blinking Of Red Status LED Ind
11. r 3 4 System Learning Contents ODO VNAUNWW w Sad WN S _ O Aout 10 Il 12 Connectors 4 1 Front Side Connector 4 2 Back Side Connector Listen amp Enjoy LED Status Indicator Connectors Description 7 1 Connectors Front Side 7 2 Connectors Back Side Remote Control Troubleshooting 9 1 During Normal Usage 9 2 During Learning Caution Warranty Contact Contents 18 18 19 20 21 21 21 22 23 24 24 25 26 27 I Understanding Your Product 1 1 Wireless Speakers henceforth called as a Speaker LED On indicating Power is ON lt E26 Light Blub Connector 230V AC Input 1 2 Speaker Stand E26 Light Bulb Holder lt 230V AC Input 1 3 Wireless Sound Transmitter henceforth called as Transmitter Front Side 3 5mm Source Status Stereo Mute Jack Power Back Side Mic Ana Sub Out Aux 1 Dig2 Dig 1 Power 1 4 Microphone 1 5 Wireless Remote Control henceforth called as Remote Control Power Volume Source Source Volume Bass Treble Mid Bass Treble Mid Mute Learn Unmute 1 6 Wireless Subwoofer System Connect Switch Connect LED On indicating Power is ON 230V Note Check LED is ON when connected to Power source 2 Unpacking amp Assembly Mic wing bracket 1 coupler 1 2 1 Echo WS 01 Unpacking
12. t Place both rods with base on the floor or one rod with base on the sofa couch or a table d All 5 speakers should be in line of sight of the microphone lt UG Tb 3 3 Power On Transmitter Power Connector 3 4 System Learning a Make sure steps 3 1 to 3 3 are completed b Make sure all 5 speakers and subwoofer are powered ON c Make sure there are no loud noises in the room e e d Switch off any fans or air conditioners e Be prepared for loud tones that will come out of the speakers nn violet Press and hold Learn Button 16 3 4 1 Press and hold the learn button on the remote control The status LED will start to blink Orange a Step aside such that you are NOT in between any speaker and the microphone b Make sure you can see the front of the transmitter c Keep quiet until the Orange Status LED stops blinking 2 minutes violet aux 2 6 dc AI de T rT Power Mute Source Status 3 5mm Stereo Jack 3 4 2 You will hear set of rapid tones from all speakers Make sure you hear all five speakers and the subwoofer sound 3 4 3 Observe the transmitter front panel for any error a ERROR CASE Blinking of Red Status LED and D1 for 10 sec This indicates that the noise in the room is too loud for learning Reduce room noise and start again b ERROR CASE Blinking of Red Status LED and D2 for 10 sec This
13. viojel COLOUR OF SURROUND User Manual Model Number ECHO WS 0I www violet3d com Dear Customer Hearty congratulations on possessing a revolutionary 3D surround sound system which is completely wireless and extremely convenient to install and use This system is such that you can place the speakers wherever convenient and unlike conventional systems there are no pre fixed viewing listening positions The system can create theater like sound right in your home for you to enjoy music and movies along with your family and friends We sincerely hope you will continue to enjoy the performance of this system for years to come Should you need any clarification please do not hesitate to write to us If you are satisfied with it please do tell all your friends about it We shall be happy to arrange demonstrations for them at their homes Kind regards Bhatia L H Chairman SNAP Networks Pvt Ltd Understanding Your Product 1 1 Wireless Speakers 1 2 Speaker Stand 1 3 Wireless Sound Transmitter 1 4 Microphone 1 5 Wireless Remote Control 1 6 Wireless Subwoofer System Unpacking amp Assembly 2 1 Echo WS 01 Unpacking 2 2 Speaker Assembly 2 3 WSub 01 Unpacking 2 4 Power On Subwoofer 2 5 Power On Speakers 2 6 Speaker Placement 2 7 Microphone Assembly Installation 3 1 Connect Microphone to Transmitter 3 2 Microphone Placement for System Characterization 3 3 Power On Transmitte
Download Pdf Manuals
Related Search