USER MANUAL - Vincent Associates
Contents
1. A REAR SIDE The 17 front mount ring and Nikon F N 7 type male adapter with shutter housing final assembly as shown in Figure 3 shown with HE CS shutter housing H Figure 3 17 Video Mount Adapter User Manual 7 INSTALL OPTIONAL REAR MOUNT 125 REAR MOUNT ADAPTER ASSEMBLY ITEM PART NAME TITY PART NUMBER SHUTTER HOUSING WITH 17 MOUNT 125 CAMELIAMOUNT CAMELIA MOUNT 9003 0315 0315 Step One Screw the 125 mount onto the shutter housing rear side thread and tighten securely see Figure 4 Step Two Screw the shutter housing with 125 mount onto the Camelia camera front side internal thread see Figure 5 CAMELIA CAMERA Abts FRONT SIDE 35 SHUTTER Figure 4 HOUSING NOTES te Figure 5 When removing the shutter housing from the camera if the 125 mount is left in the camera follow the steps below shown in Figure 6 CAME TA TN er AT 1 Screw two 0 80X1 screws provided into the FRONT SIDES 125 mount 2 Grasping the two 0 80x1 screws between your thumb and fore finger remove the 125 mount in the direction shown Figure 6 17 Video Mount Adapter User Manual2. N F RING 17 FRONT MOUNT ADAPTER 9003 0325 135 CONVERSION ADAPTER 9003 0326 SET SCREW 4 40x 1 8 20 0161 INSTALL 17 FRONT MOUNT ADAPTER Step One Shutter housing is CS45 e Attach 17 front adapter and Nikon F ring on the CS shut 9 ter housing front side surface i M Z lt using 4 0 80X1 2 flat head screws and tighten Make sure the notch of 17 front mount ring is located at right side reference the 1 4 20 mount hole as the bottom See Figure 1 Shutter housing is VS series _ 135 CONVERSION ADAPTER e Screw the conversion adapter onto the VS shutter housing rear side and tighten securely N SHUTTER ev Fa 7 f e Screw the set screw into the NIKON F 17 FRONT HOUSING Figure 1 conversion adapter to lock se RING ADAPTER curely to the housing see Fig ure1 17 Video Mount Adapter User Manual 6 INSTALL OPTIONAL REAR MOUNT 126 REAR MOUNT ADAPTER ASSEMBLY PARTS LIST 2 ITEM PART NAME TITY PART NUMBER D T WITH 17 MOUNT a 126 DOVETAILRING DOVETAIL RING 9003 0323 0323 126 NIKON F TYPE 9003 0324 SET SCREW 4 40x1 4 TSF 20 0149 Step One PA Screw the dovetail ring onto the shutter o p x AN housing rear side thread and secure the Nikon F type male adapter onto the dovetail ring by using 3 4 40X1 4 set screws see FIGURE 2 SHUTTER HOUSING CS45 SHUTTER esas SHU Step Two FRONT SIDE TIN
3. efined below RETURN MATERIAL AUTHORIZATION PROCEDURE MANUFACTURER will only accept returned Products from customers that have obtained an RMA Return Material Authorization number from the MANUFACTURER The customer must also include an itemized statement of defect s The Product will then be evaluated per the MANUFACTURER S standard repair guidelines Any Product which has been re turned to the MANUFACTURER but which is found to meet the applicable specifications and not defective in materials and workmanship shall be subject to the MANUFACTURER s standard evaluation charge The MANUFACTURER assumes no liability for customer returned material LIMIT OF LIABILITY The buyer s exclusive remedy and the limit of MANUFACTURER S liability for any loss whatsoever shall not exceed the purchase price paid by the buyer for the goods to which a claim is made MANUFACTURER does not give any implied warranties of merchantability fitness for a particular purpose or of any other nature in connection with the sale of any Products 17 Video Mount Adapter User Manual 3 Table of Contents 17 Video Mount Adapter User Manual Introduction 17 CS25 This mounting option cannot be ordered separately Must be ordered with a shutter selection only The 17 CS25 video adapter system adapts a CS25 shutter housing and a Nikon lens to a video camera that is equipped with C mount thread 1 00in x 32TPI No modification to the camera should be necessary The sh
4. l a UNniDLITZ Shutter Systems 1 800 828 6972 VincentAssociates USER MANUAL 17 Video Mount Adapter 14 0010 Version 2 00 2013 For information regarding applicable intellectual property please visit www uniblitz com patents Information in this publication supersedes that in all previously published material Due to our ongoing development program Vincent Associates reserves the right to discontinue or change specifications or de signs at any time without incurring any obligation Version 2 00 2013 Vincent Associates a Division of VA Inc 803 Linden Ave Rochester NY 14625 Tel 585 385 5930 Fax 585 385 6004 UNIBLITZ N CAS and VINCENT ASSOCIATES are registered trademarks of VA Inc Printed in the U S A 17 Video Mount Adapter User Manual 2 Warranty LIMITED PRODUCT WARRANTY All Products manufactured by VINCENT ASSOCIATES MANUFACTURER are warranted to meet published specifications and to be free of defects in materials and workmanship as defined in the specifications for 365 days one year WARRANTY PERIOD from the date of original shipment of the product DSS series shutters are additionally warranted to achieve two million cycles within the WARRANTY PERIOD as defined in the CYCLE WARRANTY CRITERION MANUFACTURER will at its own option within the WARRANTY PERIOD repair or replace without charge any listed item discovered to be defective excepting transportation charges Burned out
5. or otherwise damaged actuator coils are not covered under this warranty Any defective product returned to the MANU FACTURER must follow the RETURN MATERIAL AUTHORIZATION PROCEDURE as defined below This warranty does not extend to cover damage resulting from alteration misuse negligence abuse normal wear and tear or accident The MANUFACTURER will consider the return of unused equipment if returned within 30 days from the original date of shipment subject to a 20 restocking charge This offer does not apply to used or damaged equipment This warranty extends only to the original purchase and is not availa ble to any third party including any purchaser assemblies or other Products of which the goods may become component equipment CYCLE WARRANTY CRITERION One cycle is considered one open and one closure of the shutter DSS Shutter must be operated with the ED12DSS driver or equivalent H Bridge type shutter driver circuit at 10 7VDC across the actuator coil for the specified duration DSS Shutter must be operated within the de fined environmental electrical and mechanical specifications as listed on the device s data sheet After one year WARRANTY PERIOD the cycle warranty is null and void If returned the device must be accompa nied by a written statement indicating the approximate number of cycles contained on the device include all parameters to which the shutter was operated and follow the RETURN MATERIAL AUTHORIZATION PROCEDURE as d
6. t be ordered with a shutter selection only The 17 video adapter systems adapts a shutter housing and a Nikon lens to a video camera that is equipped with C mount thread 1 00in x 32TP1 No modification to the camera should be necessary The shutter unit replaces a standard F C mount This adapter is available only with the housed VS14 and VS25 shutter units and is integral to the housing A similar con figuration can also be ordered for the VS35 CS25 CS35 or CS45 shutter series 17 VS35 This mounting option cannot be ordered separately Must be ordered with a shutter selection only The VS35 17 housing differs from the VS14 VS25 version given that the rear thread is a 2 00x40TPI thread It can be adapted using these threads into user applications via the 125 Camelia Adapter the 126 F Type Male Bayonet Adapter the 127 Dalstar adapter or the 128 Cooke Camera adapter A similar configuration can also be ordered on the housed versions of the VS14 VS25 CS25 CS35 or CS45 shutter series 17 Video Mount Adapter User Manual 5 Assembly Procedure Mount Assembly Unpack the Mount Set As you remove the packing material from the box check for small items that may be attached to the packing material Make sure the following parts were included in the box see parts list 1 2 or 3 and Figure 1 2 or 4 FRONT MOUNT ADAPTER ASSEMBLY PARTS LIST 1 PART NAME QUANTITY PART NUMBER SCREW 0 80x1 2 F H 4 20 0115 9003 0249 NIKO
7. utter unit replaces a standard F C mount see drawing for F C mount outline for comparison The C Mount threaded portion is integral to the CS25 s standard housing A similar configuration can also be ordered on the housed versions of the VS14 VS25 VS35 CS35 or CS45 shutter devices 17 CS35 This mounting option cannot be ordered separately Must be ordered with a shutter selection only The CS35 17 housing differs from the CS25 version given that the rear thread is a 2 00x40TPI thread It can be adapted using these threads into user applications via the 125 Camelia Adapter the 126 F Type Male Bayonet Adapter the 127 Dalstar Adapter the 128 Cooke Camera Adapter or any user application configured with the 2 00x40TPI female thread A similar configuration can also be ordered on the housed versions of the VS14 VS25 VS35 CS25 or CS45 shutter series 17 CS45 This mounting option cannot be ordered separately Must be ordered with a shutter selection only The CS45 17 housing differs from the CS25 version given that the rear thread is a 2 00x40TPI thread It can be adapted using these threads into user applications via the 125 Camelia Adapter the 126 F Type Male Bayonet Adapter the 127 Dalstar adapter or the 128 Cooke Camera adapter A similar configuration can also be ordered on the housed versions of the VS14 VS25 VS35 CS25 or CS35 shutter series 17 VS14 VS25 This mounting option cannot be ordered separately Mus
Download Pdf Manuals
Related Search