USER`S MANUAL
Contents
1. CALOR SRL gt Str Progresului nr 30 40 sector 5 Bucuresti tel 021 411 44 44 fax 021 411 36 14 www calorserv ro www calor ro GL17Eng Thank you for choosing our company products Air conditioning facilities are valuable products In order to protect your legitimate rights and interests please make sure that the installations are done by professional technicians This Manual is a general purpose version for the split floor standing air conditioning systems manufactured by our Co the one that you have chosen might be a little different in appearance from the ones described in this Manual But these differences will not have any impacts upon your operation and use of the system Please read the Manual carefully before you operate the system and check to see if the model is identical to the one you have purchased Keep this Manual properly in case you might refer to it in the future Addition to the user manual The appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance CONTENTS Instructions to Users 1 Names and Functions of Various Parts 2 Use of Control Panel 5 Use of remote controller 6 Methods of Maintenance 11 Phenomena Diagnosis and Treatment 12 INSTUCTIONS TO USERS Please read the Manual carefully before using the air conditioner so2. swinging fan blade indicates winging wind SLEEPING KEY Press the key to choose sleeping mode the AC will TIMING KEY To press timing key to set operate with low wind turning on time turning off time and to cancel timing the time range is 1 12 speed and automatically turns off after 8 hours Press the key once again oe to cancel sleeping mode SWINGING WIND TEMPERATURE KEY SELECTION KEY Press the key once to increase the set temperature by 1 C the highest temperature is 29 C To choose different wind types of swinging windor set wind by pressing this key WIND SPEED SELECTION KEY TEMPERATURE KEY Press the key once to reduce the set temperature by 19C the lowest temperature is 18 C Press the key to choose the wind speed and the wind speed changes in the following order with each press high middle low MODE SELECTION KEY TURN ON OFF KEY MODE DD Press the key to choose Press the key to turn on or operation modes of turn off the AC unit refrigerating dehumidifying heating or ventilating for refrigerating only AC unit Operation Panel 2 Dehumidifying operation display Refrigerating operation display Display sign of fan Room emperature display Set temperature display Display lock up function Swinging wind operation display TURN
3. ON OFF KEY Press the key to turn on or turn off the AC unit TEMPERATURE KEY Press the key once to increase the set temperature by 1 C the highest temperature is 29 C TEMPERATURE KEY reduce the set temperature by 1 C the lowest temperature is 18 C WIND SPEED SELECTION KEY Press the key to choose the wind speed and the wind speed changes in the following order with each press high middle low Press the key once to Ss 7 Specification SWINGING WIND SELECTION KEY To choose different wind types of swinging windor set wind by pressing this key Heating ventilating operation display High Middle and low wind speed operation display one bright fan blade indicates low wind speed two bright fan blade indicates middle wind speed three bright fan blade indicates high wind speed swinging fan blade indicates winging wind kA Th kk wo To press timing key to set turning Usually the display screen shows only the function mode and operation status you choose When room temperature equals to or is lower than 18 C the function of dehumidifying cannot be used Timing display Sleeping operation display Defrosting operation display MODE SELECTION KEY Press the key to choose operatio modes
4. as to ensure the normal operations of the units Do not open the return air grids of the indoor unit during operations Operate the machine only under the nominated voltage and frequency and with corresponding protective devices Never use copper wires to substitute the fuses which might lead to operational faults or fire hazards Do not block the air inlet and outlet of the indoor or outdoor units so as to avoid possible negative impacts upon the machine performances or hazards Indoor unit Air inlet blocked Outdoor unit Air outlet blocked Do not put the sticks or other similar objects into the air inlet and outlet Dangerous aed ee When the power supply is resumed the air conditioner will automatically enter the standby mode Press the On Off button to restart the operation In the case that the breaker is frequently disconnected you should stop the operation of the machine and contact the dealer or our Co authorized maintenance shop Power leakage protection switch Do not place insecticides paints or other inflammables near the inlet or outlet do not spray such articles directly against the units It might result in faulty operations or electric shocks and other hazards If the machine is not in use for long time the power source should be disconnected for the sake of safety and energy saving When you restart the operation after a long period of non operation you should carefully
5. beg your forgiveness that we would not introduce the button or indicator which is not applicable for the units you purchased Remote controller 2 Sleeping indicator Temperature indicator indicates set temperature Swinging indicator Cooling indicator Dehumidifying indicator Heating indicator Faning indicator 5 Fan speed indicator E Lock key indicator ON Timed time or s o AE B TEMP SETTING button Each pressing of the button the temperature setting is TEMP SETTING button Each pressing of the button the temperature setting is increased by 1 C decreased by 1 C ON OFF button Press this button will start the operations SWING button YY i the units Press it once again will stop Press this button to select the left right the operations swinging of air delivery or to stop swinging MODE button This button is used to select the cooling FAN SPEED button A heating or dehumidification mode of operation Press this button to select the high speed mid speed or low speed of air delivery TIMER button This button is used to set the switch on or sequence of mode switch is cooling dehumidification heating J For the cooling only models the Heating mode is for FAN LAMP button switch off time Used together with the Press this button to make the lamp of control HOUR button the time setting can be made within the range of 1 12 hours with the interval of one
6. check the air conditioner and the wire connection If the electric wires are damaged or need to be replaced due to other reasons please ask our Co after sale service person or the professional technicians in the authorized maintenance shops to do the replacement so as to avoid possible electric shock overheating fire hazards or other accidents NAMES AND FUNCTIONS OF VARIOUS PARTS Indoor Unit Up down air direction guides For adjusting the vertical air delivery directions Left right air swinging fins For adjusting horizontal air delivery directions II Air outlet Control panel Air filter grids For air inlet from the room air l N pi Air filter screen For filtering dust and filth in the air Outdoor Units Air inlet Air inlet Air inlet Air inlet Air outlet Features and appearance will vary All the figure give a demonstration to introduce the function Operation Panel 1 Refrigerating Operation Display Defrosting Operation Display Dehumidifying operation display Heating ventilating operation display Room set temperature and failure code display Timing Display Display sign of fan FIII Wind speed operation swinging wind display one bright fan blade indicates low wind speed two bright fan blade indicates middle wind speed three bright fan blade indicates high wind speed
7. hour panel lights on or off MIN button This button is used to set the current time HOUR button This button is used to set the timed time or the current time HOLD button 3 Press this button to lock or unlock the keyboard SLEEP button This button changes to SLEEP operation press again to cancel the sleep operation Above figure shows all indications for the purpose of explanation but practically only the pertinent This remote controller is the general one of our company it can be used for many types of our air conditioners We beg your forgiveness that we would not introduce the button or indicator which is not applicable for the units you purchased Remote controller 3 Set temperature indicator Fan speed indicator Cooling indicator Drying indicator Sleeping indicator Key hold indicator Air flow indicator Heating indicator Faning indicator Timed time or current time indicator TEMP SETTING button Each pressing of the button the temperature MODE button setting is increased or decreased by 1 C This button is used to select the cooling dry heating faning mode of operation ON OFF button Press this button will start the operations of TIMER HOUR MIN the units Press it once again will stop the TIMER button CD CO CoO piel This button is used to set the switch on or SLEEP HOLD LAMP HOUR button Switch off time Used together with the CDL This button is u
8. of refrigerating dehumidifying heating or ventilating for refrigerating only AC unit SLEEPING KEY Press the key to choose sleeping mode the AC will operate with low wind speed and automatically turns off after 8 hours Press the key once again to cancel sleeping mode TIMING KEY on time turning off time and to cancel timing the time range is 1 12 hours When room temperature equals to or is lower than set temperature the AC unit stops for a period of time to save energy The AC unit is equipped with automatic defrosting function and the defrosting operation display on the display screen is bright when the machine defrosts The AC unit with heat pump has auxiliary electric heating function which will automatically turns on or off according to room temperature during heating operation to achieve the best heating result If you turn on the machine immediately after it is turned off the machine with time lapse starting function will automatically turns on the machine after 3 minutes to protect it Note the position and arrangement of keys in different models and different types of AC might vary but the keys with same name have the same function USE OF CONTROL PANEL Operation of Mode change between Refrigerating Dehumidifying Heating Ventilating 1 Press on off key 2 Press mode key to choose the mode you want When you choose ventilating mode the compressor does not work 3 Press temperature
9. sleep mode when you are going to bed If this mode is used in the day the capacity is reduced since the ambient temperature is too high COOL MODE During the operation of cooling the room temperature will be raised by 1 C higher than the setting after the machine begins to operate in the sleeping mode During the operation of heating mode the room temperature will be dropped 2 C lower than the setting after the machine begins to operate in the sleeping mode TIMER OPERATION PRODEDURE Timed switch off 1 Duing the operation of the air conditioner press the TIMER button and the air conditioner will enter the timed switch off mode 2 Press the HOUR button to set the needed time Every the button is pressed indication change is the following sequence 2 121 3 After the setting the digits shown on the display screen will go down by 1 for every elapsed hour Timed switch on 1 When the air conditioner is in the standby mode press the TIMER button and the air conditioner will enter the timed switch on mode 2 Press the HOUR button to set the needed time The timer can make the setting in the range from 1 12 hours 3 After the setting the digits shown on the display screen will go down by 1 for evey elapsed hour Releasing procedure Press the TIMER button again to release the mode REPLACEMENT OF BATTERIES X When the signal from the remote controller become weak and the indoor unit can not receive it properly or the indicat
10. sound of refrigerant flowing smoke or other odd odors Sometimes the air sent out from the air During the operation or when the machine When the cooling or heating operation is conditioner may smell some odd odors stopped some ZZZ sound may be Started or stopped some patting sound This is due to the cigarette smoke the may be heard This is because some parts cosmetic smell the odors of walls or ae 7 in of the surface boards are expanded due furniture pieces in the room that are inside the air conditioner is still flowing tg changes of temperature which results stained on the air conditioner in the friction of these parts This is not a performance fault heard This is because the refrigerant
11. e the fixing screws of the air return grids Pull in the direction of arrow 1 to open the grids Pull in the direction of arrow 2 to take out the air filter screen The air filter screen is loaded inside the air return grids Cleaning of the filter screen Gently pat the screen or use a vacuum cleaner to do the cleaning If too much filth is accumulated on the screen a small amount of neutral detergent solution can be used for the cleaning After the cleaning the screen must be dried in air and be put back into place Prior To Operational Seasons After The Operational Seasons Check to see if the air outlets of the indoor and outdoor units are blocked The protective cover of the outdoor unit must be removed Air outlet is blocked Air inlet is blocked Check to see if the power cable and grounding wire are in proper state O Check and confirm that there is any bending or raised ends or blockage of the drainage tubes Make sure that the air filter screen is properly in place before operating the machine If the machine is operated with the air filter screen removed dust and foreign objects will result in faulty performances of the air conditioner Disconnect the power source of the air conditioner Before pulling out the power plug make sure that the operation of the machine is fully stopped gt ag Make proper maintenance to the air filter screen and
12. es to SLEEP operation press again to cancel the sleep operotion Fan Speed Selection button Press this button to select the high speed med speed or low speed of air delivery TIMER button This button is used to set the switch on or switch off time Used together with the HOUR button the time setting can be made within the range of 1 12 hours with the interval of one hour HOUR MIN Ld Temperature indicator Indicates the set temperature Lock key indicator Air flow indicator Sleep mode indicator ON OFF button Press this button will start the operations of the units Press it once again will stop the operations Timed time indicator Operation Mode button This button is used to select the cooling heating or dehumidification mode of operation sequence of mode switch is cooling dehumidification heating cee Ss For the cooling only models the Heating mode is for FAN LAMP button Press this button to make the lamp of control panel lights on or off SWING button Press this button to select the left right swinging of air delivery or to stop swinging Time Setting button This button is used to set the current time or the time for timed switch on of switch off Above figure shows all indications for the purpose of explanation but practically only the pertinent This remote controller is the general one of our company it can be used for many types of our air conditioners We
13. hods 1 Suitable for remote controller 1and 2 1 When cells are inserted under the timer operation has not been set unload the back cover push the CLK button with the tip of a ball pen etc The time indicator is flickering and can set the present time 2 Press the HOUR button to set you desired time 3 Press the MIN button to set you desired time 4 Press the CLK button again then reatach the back cover 5 In case of the abnormally use of remote controller press the RST button to reset the remote controller Methods 2 Suitable for remote controller 3 Methods 1 When cells are inserted under the timer operation has not been set 1 Continually press the HOUR button about 2 seconds the time indicator is flickering and press the HOUR button to set you desired time 2 Continually press the MIN button about 2 seconds the time indicator is flickering and press the MIN button to set you desired time 3 Press the ON OFF button to confirm the set time or it would automatically exit the time setting state after 15 seconds If when the remote controller is at abnormal state you can take out the batteries on the back cover to clear off the display SLEEP OPERATION PROCEDURE Use this mode to reduce operation sound when sleeping etc Press the SLEEP button the air flow sound from the indoor unit is decreased Press the SLEEP button again can release the mode and the air conditioner will be stopped automatically in 8 hours NOTE Use the
14. ions on the display screen becomes blurred please replace with two new batteries The positive and negative poles must match the installation positions New batteries of the same type have to be used for replacement X lf the remote controller is not to be used for long time take out the batteries so as to prevent the leakage of the electrolyte from damaging the controller NOTE 1 Do not use an old battery with with a new one 2 The life of cell made in conformity to JIS or IEC is 6 to 12 moths in normal use lf it is used longer or an unspecified cell is used a liquid leaks from the cell causing the remote controller inoperative 3 Guideline of the life time is printed on the battery The battery life may be shorter than that of air conditioner depending on the date of manufacture However the battery may be alive ever after the norminal life time expired METHODS OF MAINTENANCE Make sure that the power of the air conditioner is turned off before the maintenance is to be done Power must be turned off before doing the cleaning Use a piece of soft dry cloth to clear off the dust on the units Do not use volatile oil gasoline diluting agents or abrasive power etc in doing the cleaning Use household neutral detergent to clean the fingerprints or oil stains Do not use water to flush the units Removal of the filter screen Make sure that the operation of the air conditioner is fully stopped Remov
15. key to set the room temperature you want The room temperature range is 18 C 29 C 4 Press the key of wind speed to set the speed you want from high through middle to low The fan operates in low speed under the mode of dehumidifying 5 Press the key of swinging wind to change wind direction 6 Press on off key once again to stop If you turn on the machine immediately ofter it is turned off the machine with time lapse starting function will automatically turns on the machine MODE CO after 3 minutes to protect it Change wind direction Change Left Right Wind Direction Press wind swinging key the screen will display swinging wind blade which changes wind direction by swinging from left to right Set wind direction When wind blade reaches the position you desire press wind swinging key again to stop the blade for a set wind direction Change up down wind direction Hold both ends of wind guide panel to change the wind sending angle Timing operation Set turning off time Set the time for the unit to turn off and when it is time the AC will automatically stop operating Steps of setting turning off time 1 When AC is working press the key of 2 and the machine is in the timing status of turning off 2 Press the key of continuously to reach the turning off time you want within a time range of 1 12 hours five seconds later the machine is in the timing status of turning off 3 After the turning off time is set the AC
16. other paris Please use a plastic sheet to cover the unit to prevent dust or filth from entering the outdoor unit Do not place the air filter screen under the exposure of sunlight or near an over to dry do not use warm water above 40 C to do the cleaning so as to avoid deformation PHENOMENA DIAGNOSIS AND TREATMENT Please read the following contents before contacting the maintenance people TROUBLE PHENOMENA CAUSES TREATMENT Press the ON OFF button again after Power failure the power is resumed Power source not connected Connect to the power source Air conditioner Press the ON OFF does not work button but the air Fuse blown Replace fuse conditioner does not al Breaker in off position Connect the breaker Room temperature not properly Reduce or increase the room adjusted temperature setting There is air delivery Dust blocking the air filter screen Clean the air filter screen at the outlet but it Control panel is not cooling or indications normal heating Blocking objects at the inlet or outlet of the indoor or outdoor units Remove the objects Door or windows open Close the door or windows If the above stated problem is not solved even after the related corrective measure is taken please disconnect the power source and contact our Co dealer of the authorized maintenance shop The following phenomena air not faulty operational performances he air inside the room smells cigarette The
17. sed to set the timed time or HOUR button the time setting can be made FAN SPEED CLEAN SWING the current time within the range of 1 12 hours with the interval of one hour E C C gt MIN button This button is used to set the current time SLEEP button This button changes to sleep operation press again to cancel the sleep operation LAMP button Press this button to make the lamp of control panel lights on or off SWING button FAN SPEED button Press this button to select the high speed mid Press this button to select the left right swinging of air delivery or to stop swinging speed or low speed of air delivery HOLD button Press this button to lock or unlock the keyboard Above figure shows all indications for the purpose of explanation but practically only the pertinent Operating Machine In selected modes 1 Point the remote controller at the unit oress the MODE button select the needed mode cooling heating ventilating for cooling only model and dry 2 Press the temperature setting button to increase or decrease the readings until the needed temperature is displayed In cooling heating operations the temperature difference of 50C between the selected temperature and the ambiend temperature is most suitable for your health 3 Press fan speed button to choose the air volume you want 4 Press swing button to choose the left right air direction you want PRESENT TIME SETTING PROCEDURE Met
18. unit will automatically turn off at your set time 4 To cancel the timing press the key of 5 continuously till 12 is displayed one more press and the timing is cancelled when the machine is working only timing turning off function is functional Set turning on time Set the time for the unit to turn on and when it is time the AC will automatically start operating Steps of setting turning on time 1 When AC is working press the key of 9 and the machine is in the timing status of turning on 2 Press the key of continuously to reach the turning on time you want within a time range of 1 12 hours five seconds later the machine is in the timing status of turning on 3 After the turning on time is set the AC unit will automatically turn on at your set time 4 To cancel the timing press the key of continuously till 12 is displayed one more press and the timing is cancelled USE OF REMOTE CONTROLLER NOTE Please check to refer the instructions for the identical remote controller of your air conditioner Remote controller 1 Signal transmitting section Operation mode indictor Fan speed indicator Time indicator Temperature Setting button This button is used to set the room temperature Each pressing of the AA or Y button the temperature setting is increased or decreased by 1 C ON TIMER B 84 OFF TIMER fe HOLD button Press this button to lock or unlock the keyboard SLEEP button This button chang
Download Pdf Manuals
Related Search