Instructions d`utilisation pour scie médicale
Contents
1. OXSCIVIED SWISS MEDICAL PRODUCTS Page 1 4 Instructions of use for cast cutter saw OSCIMED PSV 1 Technical description 1 1 The electrical power supply Supplied from a socket by a cable which passes through a transformer reducing voltage to 24 VDC it is optimal for the security The device complied with the latest version of medical standards EN 60601 1 2 _ he electro mechanical drive The oscillating movement of the blade is made by a DC motor and a mechanical device which is made from high quality materials with low wear and without maintenance The motor and the high lifespan sensor switch are driven by a microprocessor card The electromechanical device is mount trough anti noise rubbers on the body of the cutter to avoid vibrations in the hand and noise The switch situated closed to the user s hand is a contactless long life time sensor 1 3 The cutting blades The blades have a synthetic coupling center A special lock nut makes it easy to install or change the blade without any tool 1 4 Technical data Main voltage Electricity network frequency Cycle of use Length of the saw Diameter Weight Speed of the motor frequency IPO Protection P20 Storage carriage and use condition Temperature 0 35 C Humidity 0 90 Pressure 900 1080 hpa Version V1 3 OSCIVIED SWISS MEDICAL PRODUCTS Page 2 4 2 Use Safety Maintenance 2 1 Start and sto Plug into electric socket Pr2. ess the red sensor switch to start the saw press a second time to stop it 2 2 Vacuum nozzle change First disconnect the power supply Then remove the vacuum nozzle to reach the blade by pushing the supple parts on both sides in order to release the nozzle and slide it up set the nozzle back by inserting it in the guide and push down to the bottom till the automatic lock 2 3 Saw blade change First disconnect the power supply Remove the vacuum nozzle to reach the blade o Turn the blue blade lock nut 1 a quarter turn and pull it out To remove the blade incline it a little and pull out Set the new blade 2 on notched spindle return the lock nut and turn back a quarter turn on its internal locking notch 1 Version V1 3 OXSCIVIED SWISS MEDICAL PRODUCTS Page 3 4 2 4 Vacuum hose insertion Place the screws of the hose coupling connection in a Turn a quarter in order to get vertical position as shown on the photo and insert on the screws horizontal and the end piece housing saw lock the connecting part Proceed the opposite way to remove the hose 2 0 Field of use In a general way every use other than cutting bandages and casts is forbidden In the medical field this saw is not authorized for use where the saw blade could be in direct contact with the patient or for surgery 2 6 _ Protection against mechanical overload To avoid overloads in case of fall and for the patient secu
3. evice can be used only by an operator competent in plaster room who has attentively read this present instruction Every modification of the device in comparison with its original version is strictly forbidden The duty cycle according to chapter 1 4 is only available when the saw is used together with the vacuum cleaner which is cooling the saw The device is designed only for a dry use and must be used or stored in a dry place only Every use other than the one indicated on the present manual may constitute a danger which can so be avoided Check that the socket in compliance with the plug of the device Check that the indicated voltage on the motor block is in compliance with the used power source Never let the device running unattended Always take the plug off before doing whichever intervention on the device or when the device remains unattended or within reach of children or persons who are not responsible for their actions Do not pull neither lift the device when using the electric cable The maintenance and repairs must be provided by specialised persons the possibly damaged parts will be replaced by original spare parts The manufacturer refuses to accept any responsibility in case of every third party damage to people animals or objects as a result of the lack of respect of these following instructions or if the device has been used on an unproper way Manufacturer s address OSCIMED SA All e du Quar
4. rity the saw stops automatically in case of brutal overload on the saw blade In this case disconnect the power supply wait 2 minutes and reconnect the device to restart the saw 2 ___ Electric shocks protection standards labellin Meaning of the symbols pH Read the At the end of life of the device documentation please contact the relevant local authorities or your distributor concerning the disposing of sorted waste C Product in compliance MN Alternative current with european directives and standards SN Serial number Reference number Class II device with Version V1 3 OSCIVIED SWISS MEDICAL PRODUCTS Page 4 4 double electrical insulation without protective earth Remark concerning the immunity to the electro static discharges Trials according to the EN 61000 4 2 norm have shown a non destructive and very short lasting stop of the saw in case of a more than 4000 volts electric shock 2 8 _ Maintenance Cleaning Disconnect the power supply before any maintenance or cleaning operation Check that no electric cable is damaged that the oscillating shaft and the switch are not blocked in their movements by an accumulation of sawing wastes The only maintenance this saw needs is that it has to be kept clean Wipe clean with a damp rag Do neither immerse the saw in water nor every other liquid nor clean it with a shower 3 Be sure to observe scrupulously the safety instructions The d
5. tz 3 CH 2300 La Chaux de Fonds Version V1 3
Download Pdf Manuals
Related Search