Optibox pony - Users Manual English
Contents
1. In this Submenu you can choose the time after which the receiver will go into Standby Sleep Mode Provided the receiver is not undertaking any task such as recording and also provided there is no input via the remote control or the front panel keys the receiver would go into Standby after the set time Options are Off None 0 30m 3 00h in 30min steps In this Sub Menu you can make some settings for your connected Hard Disk Drive for the PVR Operation and also format the HDD The Sub Menu includes the following functions e Record List Timer e PVR Settings e HDD Settings A Timer is used to Programme the Receiver to switch on and off again at certain times and to tune to a specified channel Timers are normally used to record a TV Programme on the video recorder or to pre programme the receiver for other reasons i e wake up A set timer causes the receiver to wake up from standby mode at the specified time or change the channel to the specified one 32 Please note Timersettings that have been programmed in the EPG see EPG Timer point 6 4 are automatically marked in the Timerlist as Recording and can be edited GREEN or deleted RED here In the Record List Submenu please press YELLOW ADD to manually add an Event to the timer If an external HDD is connected to the USB port and is operational recordings can be made directly on the HDD Please enter Date Start Time Stop Time2. Channel List TV Radio Channel Mode Once Daily Weekly Save the newly set Recording Event by pressing the BLUE key 11 2 PVR Settings Other Options in this Menu are In this Submenu you can select the default duration for direct recordings For direct recordings a window appears after pressing the REC key which displays this pre defined setting Before beginning the recording this can be adjusted The 1 suggested option is automatically the end time of the current event that the receiver draws from the EPG Information if provided by the TV Operator Record Start Padding Time Automatically adds time before your recording to cater for possible delays in the broadcast choose between None 5 10 15 20 25 and 30 minutes Record End Padding Time Automatically adds time to the end of your recording to cater for possible delays in the broadcast choose between None 5 10 15 20 25 and 30 minutes 33 Jum ihe GD ED 11 3 HDD Properties HDD Information displays the File System the Total Used and Free Size of the connected USB Hard Disk Drive Duration Set the size of jumps to be performed when you press keys during playback Choose between 1 5 10 20 In this Sub Menu you can see all information about your connected Hard Disk Drive as well as an option to format the HDD HDD Speed gives you the option to perform a speed test to verify that the s
3. 2 10 USER SETUP 10 1 Language Setting Please use the CURSOR keys to select Language Setting Time Setting Parental Control A V Control OSD Setting Automatic Power Down e Menu Language Select the preferred language for the system menus e Audio Language 1 2 Some TV programs send multiple audio tracks for example in two different languages If there are no audio tracks available that match your settings another language may be used instead Subtitle Language 1 2 Select the preferred language for the subtitling and Programme information e EPG Language Select the preferred language for the Electronic Programme Guide 28 10 2 Time Setting This menu contains Time Setting Summer Time and GMT Offset Select Manual or Auto mode using the CURSOR LEFT or CURSOR RIGHT keys and use OK to confirm If you wish to change time and date manually in time offset menu please set the option to Manual Also Summertime can either be set to Auto Off or On In Auto mode the Receiver automatically changes to and from Summertime at the according dates This menu contains Time Setting Summer Time and GMT Offset Select Manual or Auto mode using the CURSOR LEFT or CURSOR RIGHT keys and use OK to confirm If you wish to change time and date manually in time offset menu please set the option to Manual Also Summertime can
4. 5 3 Rear Panel VIDEO AUDIO L POWER EXT IR S PDIF opt USB AUDIO R RS232 HDMI DV 12V 3A 2 3 4 5 6 7 8 9 i i O FUNCTION Input for Satellite Signal Video Composite Output Audio Output Left AC Power Switch Input external IR Sensor Original part Digital Audio Output optical USB 2 0 Port Audio Output Right Serial Port for System Upgrade High Definition Digital Video Audio Output Connection for external Power Supply 13 6 WATCHING TV This chapter describes how to watch TV and listen to Radio using the receiver Thanks to the advantages of Digital TV transmissions extra features are added to the broadcast such as information about the current and next program and extra options such as the ability to choose between different languages for Audio and Subtitling 6 1 General watching Use the CHANNEL UP or CHANNEL DOWN keys to go to the next and previous channel respectively Use the NUMBER keys to input a channel number Use RECALL key on the remote control to open a list of channels that the user was watching before the currently selected channel Use TV RADIO key on the remote control to toggle between the last selected TV or Radio Channel Press UP or DOWN keys on the front panel of the receiver to select the next previous channel from the current channel list Use INFO key to display the information banner about the current program Press INFO key again to display the in
5. Add an Event manually by pressing the YELLOW ADD key Enter the desired Date Start and Stop Time and under Channel choose the Channel Type TV or Radio under Channel List Choose the channel you wish to record from under Channel and choose whether you want to repeat this recording on a daily or weekly basis under Mode During Live TV you can press the PAUSE key to activate the TimeShift function Provided you have connected a USB HDD the Receiver will pause the programme With the PLAY key you can continue to watch the timeshifted programme The Information Bar indicates by how much time you are watching time shifted in relation to the live programme As with Playback you can FastForward and Rewind within the TimeShift Mode With the EXIT key or by pressing the STOP key you can stop the TimeShift Mode and resume watching in Live Mode 20 6 6 5 Playback If supported by the Channel operator by during playback details about the recorde Please note Functions such as Recording Timeshift and Playback require an external HDD to be connected via USB 2 0 After pressing the FILE LIST key a list is displayed which contains all the recorded programmes on your connected external USB HDD Use the UP DOWN keys to move the cursor to the desired programme and confirm with the OK key to start playback If you have previously watched this specific recording you will be asked if you want to begin
6. e7 ED 9 0 OTA Satelit 23 5E ASTRA 3A Frekvence 12525 Symbolov rychlost 27500 Polarizace Vertik ln j He ve ull IESE OTA Download If the initially grey KoF TACE appears with a RED background a new Software is available for download Press the RED AUDIO key and after a few seconds you will be asked to confirm the download by pressing the key OTA Satelit 23 5E ASTRA 3A Frekvence 12565 HURUN Symbolova fn nea Potvrdit Download slu ba nalezena Vyberte ANO pro zah jen stahov n Polarizace Please wait download in progress After confirming the receiver LOADER DATA restarts and downloads the new MAN CODE 222 LOAD VER HW VER 2 VARIANT Software from Satellite SIG YER af LOADER YER DOWNLOAD PROGRESS Downloading Over The Air ERROR 0x00000000 Updating the receiver Software may take 25 minutes or more Warning Please never turn the receiver off during the upgrading process The receiver will re boot automatically after finished 37 14 2 Default Setting 38 In this menu you can delete all channels for TV or Radio Additionally you can perform a factory reset to set back Channels the Configuration to the original state as well as perform a Default Setting Default Settings can be chosen for gt Delete Channels Choose to delete either All Channels TV or Radio Channels only gt Factory Reset The original Factory Programming is re loaded
7. only if a USB HDD is connected and operational FAV STATUS OPTION FIND SATELLITE Open List of Chanrels sorted by Satellite AUDIO SUBTITLE SLEEP CURSOR UP By pressing this button the user can jump to next channel on the channel list In menu structure user can move up one row CURSOR LEFT By pressing this button the user can decrease the audio volume level of the receiver In menu structure user can change between selectable options 10 HELP TVformat TVRADIO MODE CURSOR DOWN By pressing this button the user can jump to previous channel on the channel list In menu structure Cie CURSOR RIGHT By pressing this button the user can increase the audio volume level of the receiver In menu X structure user can change between selectable options E a user Can move down one row OK OK ENTER By pressing this button the user can confirma ENTER selection or save settings in a menu 1 Zasc 3 DEF MENU By pressing this button the user can activate the main menu of the receiver EKL 6 mno NTE EXIT By pressing this button the user can exit from the menu EXIT without saving the made changes or go one step back in the Srv 9 voz menu structure FILE By pressing this button you can access the recorded files on a connected USB Hard Disk Drive SLOW MOTION Slow motion playback JUMP Back Jump forward by 10 Channels in the Channel List oO JUMP Forward Jump back by 10 Channels in the Channel e RECALL S
8. Rename Channel Skip Manual PID and Network Search Optical S PDIF Output for Digital Audio or Dolby AC3 Software Upgrade via OTA Multifeed Function for Operator Subchannels Teletext with Sub Page access Standby lt 1 Watt 4 HOW TO CONNECT YOUR RECEIVER Please note HD Signals are not transferred via RCA Video For HDTV Signals and also for the best quality on SDTV please use an HDMI cable where possible 4 1 Connecting the Receiver to TV by using an HDMI and or SCART Cable a Connect the coaxial cable Cable from your Satellite Dish to the connector marked LNB IN at the rear of the receiver b Connect an HDMI Cable between the HDMI ports of your TV Set and your Receiver c Connect the external 12V Power Supply 4 2 Connecting the Receiver to your TV by using RCA cable ANTENNA gt a Connect the coaxial cable Cable from your Satellite Dish to the connector marked LNB IN at the rear of the receiver b Connect the RCA cable to port Audio L R and Video of Receiver to the respective RCA ports of your TV Set c Ifthe TV has a HDMI input connect the Receiver amp TV using a HDMI cable d Connect the external 12V Power Supply 5 HARDWARE 5 1 Remote Control POWER By pressing this button the receiver will go into standby mode When the receiver is in standby mode it can be awakened by pressing this button again MUTE X HELP TV format TV RADIO MODE q1 2 ABC
9. either for all All Parameters Default Setting only Channels or only Configuration 15 TROUBLE SHOOTING Problem Possible causes Remedy LED on front panel AC Power cord Connect power cord properly does not light disconnected into the power socket No picture or sound Wrong connection of the Connect correctly with HDMI Video audio output to TV input cable or RCA or RF cable terminal Wrong connection of antenna Connect the antenna cable cable correctly No signal or weak signal Check the cable connections and Satellite Dish alignment Wrong setting of channels Type the setting value correctly Information in MENU screen Black and white Your TV mode is different from Use TV of same mode Use the screen or V Hold broadcasting mode NTSC PAL converter Connection to the receiver and TV The remote control Battery exhausted Change the batteries is not working Fluorescent light interfering with Switch off the light the remote control Remote control is incorrectly Aim the remote control at the aimed receiver Distorted menu Too high brightness and contrast Adjust brightness and contrast screen level of TV set to low level Switch off the receiver remove Not working Brocessdown the power cord After a short moment re insert the power cord and switch on again 39 16 TECHNICAL SPECIFICATIONS Tuner Input F Type IF Inputfrequency 950MHZ to 2150MHz Input Level 65 dBm 25 dBm LNB Power 13 18VDC 500mA Max DiSEqC Cont
10. in Groups In the Channel List press the RED key to display options All TV Satellite Favourite Provider CAS Type of encryption In the Channel List you can also sort the Channels by pressing the GREEN key Options are sorting by numerical Alohabetical or FTA to CAS order 15 6 2 Options Pressing OPTION key will open the Options menu The Options menu provides user selectable options that are available for the current channel and the current program Depending on the Programme some of the options can be available or not Selection from the available choices is made with CURSOR UP or CURSOR DOWN key and confirmation by OK key Multifeed On according Master Channels you can select from available Sub Channels You can exit the Options Menu by pressing the OPT or EXIT key Subtitling language GREEN key The user can select from available subtitle languages if more than one exists Selection from the available choices is made with CURSOR UP or CURSOR DOWN key and confirmation by OK key Some broadcasters also provide Subtitles in either DVB or Teletext Format e Audio track RED key Some TV channels broadcast multiple audio tracks for example different languages or AC3 Audio tracks Selection from the available choices can be made by pressing the CURSOR UP or CURSOR DOWN keys and confirming with the OK key Beside alternative tracks you can set the mode to Stereo or Mono left or right Providin
11. playback at the last viewed position pressing the INFO key in the file list or d programme are displayed By pressing the FAST FORWARD or REWIND keys you can increase the playback speed to 2 4 8 and 16x in both directions To stop playback press the STOP key depending on the capacity of your USB Drive it may take a little moment to display the FILE LIST again By pressing the EXIT key you can return to the live channel and to be ready operational Only FAT32 formatted Hard Disk Drives can be used Other formats can not be recognized by the receiver Before recording or TimeShift Operation please make sure that there is enough free ca 21 pacity on your Hard Disk Drive 7 MENU OPERATION The main menu can be activated by pressing the MENU key Main menu provides access to most important functions and features of the receiver These are divided into the following Menus Each Menu contains corresponding sub menus The Main Menu consists of e Edit Channels e Installation e User Setup e Mulimedia e Common Interface e Conditional Access e System You can move between the Main Menu by pressing the CURSOR UP or CURSOR DOWN key The available Sub Menus can be accessed by pressing the CURSOR RIGHT key and confirming using the OK key You can exit the menu by pressing the EXIT key 22 8 EDITING CHANNELS 8 1 Create Channel List This menu is used to shape your channel list according to your personal pr
12. then also the preferred aspect ratio conversion scheme for cases in which the transmitted Programme is in 16 9 format can be chosen The options are Pan amp Scan The receiver interprets pan amp scan vectors encoded in the Programme and crops the 16 9 input signal for display on 4 3 TV 30 Letterbox In this mode the original aspect ratio of the 16 9 input video signal is preserved thus there are vertical black bars on the top and bottom of the screen Ignore Use this setting if your TV set handles the aspect ratio conversion e Video Format Please choose from the available resolutions 1080p 1080 720p or 576p for 1080p you will need to confirm with the numeric key 1 on your Remote control a TV set that does not support 1080p Full HD will not be able to display this setting e AC3 Please choose between Off SPDIF SPDIF HDMI e Channel Switch Mode When changing channels you can choose with this setting whether the screen is to turn black before the new Live Channel appears or if you prefer the last live picture of the previous Channel to remain on the screen until the new Live Channel appears 10 5 OSD Setting In this Submenu you can adjust the display time i e time of the appearing of the info bar or other on Screen Messages and the OSD transparency in over the Live picture 31 10 6 Automatic Power Down a N E venu Previous ata Left Right pare Up Down pme Enter
13. 3 DEF G MUTE By pressing this button all audio outputs of the receiver are muted When muted Audio output can be regained by pressing this button again HELP Optional Function TV FORMAT By pressing this button you can change the Screen Format Should you experience Display problems Sk Gmo press repeatedly until your TV Set displays the best picture TV RADIO By pressing this button the user can jump between Bry 9 wz TV and radio lists of the receiver MODE By pressing this button you can determine the Screen Oi PEON Aspect Ratio STOP PLAY PAUSE FF Ei A ee 0 9 NUMBER By pressing one of the number buttons 0 9 the user can change channel or enter a number to menu ELECTRONIC PROGRAM GUIDE By pressing this button the user can see current and forthcoming programming information for each channel 7 day program information guide is also available by using this button RECALL return to previously viewed channel REWIND During Playback of recorded files this button can be used to rewind EXIT cB cD STOP By pressing this button Playback or Recording can be stopped PLAY PAUSE By pressing this button the archive on the connected USB HDD is displayed During Rewind or Fast Forward this button returns to regular playback Press PAUSE to halt Playback FAST FORWARD During Playback of recorded files this button can be used to fast forward RECORD By pressing this button you can start a recording
14. TABLE OF CONTENTS 1 SAFETY ADVIG Esmor a er Peer oete ere rer reer eee errr er errr 3 2 QUIGI SETUP scoot ste ecto ee eg eee ee e 5 3 FEATURE S pete ck cs ce acticin ct ose eee east aes eee ae 7 4 HOW TO CONNECT YOUR RECEIVER cc ccccseeceeeeeeeeeaeeeeeeees 8 5 HARDWARE hed avees con eat aces ers Sire Aerts Arena ee 10 6 WV PTC ING TM setae esi eect es ne yes ese eesee es eters escc A 14 7 MENU OPERA BION jie ht senets See a Bee Aertel Aree ta 22 8 EDITING CHANNELS rera de owmeaideesardtaste 23 9 INSTALLATION casion E EN 24 10 USERS ETUP nonea eee E 28 11 MULTIMEDIA only with a connected and operational external HDD 32 12 COMMON INTEREA CE vs tecsis cc ceccuenvdectsassdeesierhershiauideetdenvdacieendexteaens 35 13 CONDITIONAL ACCESS merer r er rra 36 14 SOTE Meer rE r T dotiatsediocielnenietntass 36 15 TROUBLE SHOOTING eraen dorr r r rer rr 39 16 TECHNICAL SPEGIFIGCA MONS rri 40 17 MANUFACTURER INFORMATION ccccceceseeeeeeeeeeeeeeeeeeaeeeees 42 1 SAFETY ADVICE This product has been manufactured to comply with international safety standards Please read the following safety precautions carefully MAINS SUPPLY 90 260V AC 50 60Hz Operate this product only from the type of power supply indicated on the marking label If you are not sure of the type of power supplied to your home consult your local power company Disconnect the product from the mains before you start any maintenance or installation procedu
15. TOP PLAY PAUSE FF m ALI List RED AUDIO By pressing this button you can choose alternative Audio tracks if provided by the channel operator GREEN SUBTITLE By pressing this button you can display ESS subtitles if provided by the channel operator YELLOW SLEEP TIMER By pressing this button one or more times the user can determine the time after which the receiver will automatically go into Standby TEXT BLUE TELETEXT By pressing this button the user can activate the teletext application AUDIO SUBTITLE SLEEP WHITE FAVORITE By pressing this button you can open the Favorite Channel Lists if you have previosly programmed C STATUS Optional Function FAV STATUS OPTION FIND STATUS INFORMATION By pressing this button the user can see present and following information about the currently watched channel O FND O FIND Search for a Channel by entering the first letters of the name 11 5 2 FRONT PANEL 1 POWER BUTTON Switch on and off Stand by 2 7 Segment Display In operation displays the current channel number 3 FRONT FLAP COMMON INTERFACE SLOT Behind the Front Flap you ll find one Common Interface Cl Slot for Conditional Access Modules CAM A CAM in combination with a Smartcard can be used to access scrambled Programmes IRDETO SMARTCARD SLOT Above the Common Interface Slot you ll find a Slot for an IRDETO Smartcard Please insert the smartcard with the chip first facing downwards 12
16. and that you have followed the manufacturer s instructions for mounting Do not place the product on an unstable cart stand tripod bracket or table where it can fall A falling product can cause serious injury to a child or adult and serious damage to the appliance LIGHTNING STORM or NOT IN USE Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time This will prevent damage to the unit due to lightning and power surges EXTRANEOUS OBJECTS Do not insert anything through the openings in the unit where they can touch dangerous voltage points or damage parts REPLACEMENT of PARTS Replacement of parts may only be made by service technician specified by the manufacturer WARNING To avoid damage of the power cord or plug Do not modify or process the power cord or plug arbitrarily Do not bend or twist the power cord Make sure to disconnect the power cord holding the plug Keep heating appliances as far as possible from the power cord in order to prevent the cover vinyl from melting The main plug shall remain readily operable To avoid electrical shock Do not open the main body Do not insert metal or inflammable objects inside the product Do not touch the power plug with wet hands Disconnect the power cord in case of lightning To avoid damage of product Do not use the product when it is out of ord
17. anel keys will result in the receiver not returning into standby automatically after the timer event is over 17 Navigating on the second level of EPG Single EPG By pressing the GREEN Toggle key the second level EPG will appear This application provides complete EPG information for the selected channel It is possible to scroll between programs in chronological order for a particular day with the CURSOR UP and CURSOR DOWN keys Choose another day using the LEFT and RIGHT keys After pressing the OK key detailed information for the Programme will be displayed Press the OK or the EXIT key to exit the detailed Information Please note Programme information will only be displayed if provided by the according channel operator 6 4 EPG Timer Timer programming via EPG In the Single or Multi EPG Mode you have the option to reserve programmes in the timer Move the cursor to the desired programme and simply press the REC key on your remote control An additional window is opened which displays the timer reservations If a HDD is connected the recording will be made accordingly to the connected external HDD If a HDD is not connected the receiver will switch to the according channel at the programmed time At exiting EXIT or MENU key please confirm the Event with the OK key Please note Should two timer reservations overlap and error message will be displayed You then need to change or delete one of the two res
18. e timeline indicating the current time in comparison to the programmes For more detailed Information on a programme press the i INFO key Please note that not all broadcasters provide EPG or detailed EPG data If you wish to add a programme to your timer for recording move the cursor to the desired programme and press the REC key on your Remote Control The event is added to your Record List and provided a USB Hard Disk Drive is connected at the set time and provided it has enough free space the event will be recorded to this USB device Please press the MENU key to return back to the EPG Menu confirming that you want to save the new event in your Record List Please note The receiver requires time to boot from Standby and to check the current time from the satellite signal and to descrambe the programme including check for new keys for the inserted Irdeto smartcard When adding an event to the record timer please allow at least 7 8 minutes before the recording is to begin Also when programming more than one event please allow time in between events accoringly When programming events via the EPG timer function you can manually edit the recording list also by default the receiver will add 5 minutes before and 5 minutes after an EPG event you can edit this padding time Start and End individually in the menu MULTIMEDIA PVR SETTING Please also note that any user input during an event via the remote control or the p
19. een Menu on your TV Set Should this not bet he case please check the connections as well as the settings of your TV Set Please use the amp key on your Remote Control to choose the Menu language and then please confirm with the key After this please choose the time zone and your desired pre programmed channel list or channel scan proceeding in the same way Information about changes to the channel list please see chapter 8 Edit Channels in the Users Manual Under chapter 5 1 you can make yourself familiar with the functions of your remote control Under chapter 6 the TV as well as Recording and Playback Functions of your receiver are described 3 FEATURES Supports SD HD MPEG4 AVC H 264 One Common Interface Slot One Irdeto Smartcard Slot USB PVR Function by using external HDD Time Shift Mode by using external HDD High Definition Video output HDMI Subtitle support OSD amp VBI insertion for TV 4 Digit 7 Segment Display Channel sorting by FTA CAS Satellite Alphabet and Network EPG Now and Next and 7 days EPG Satellitescan Simultanious Scan of 10 Satellites Video output resolution 576p 720p 1080i 1080p User selectable output resolution Multi language OSD in GB CZ SK D F I ES NL PL Fast Channel Change 5 000 Channels TV und Radio programmable 8 Favorite List amp Unlimited Programs per each Channel Edit Function Move Delete Favorite Edit Parental Lock Channel
20. eference Press the MENU key select Edit Channels by using the RIGHT CURSOR and press OK Change between TV and Radio Channels by pressing the TV RADIO key The individual functions are Delete RED Delete the highlighted Channel from the Channel List Lock GREEN Lock and unlock a Channel i e for access by minors Skip YELLOW Mark a Channel for skipping or deactivate with unskip Move BLUE Move the highlighted Channel to another position within the Channel List Rename BLACK Rename the highlighted Channel Select WHITE Select Channels i e for moving an entire group of channels in one go Find FIND Find Channels within the Channel List Please note After editing the channels and pressing the EXIT or MENU key you can confirm your new channel list by pressing OK key If you don t want to save any changes and keep the previous status cancel the process by pressing CURSOR LEFT choosing NO and confirming with the OK key 23 8 2 Edit Favorite Channels This menu is used to create a lists of your favourite channels Thus you can create up to 8 different Favorite Lists Press the MENU key select EDIT FAVORITE CHANNELS by using the RIGHT and DOWN key and confirm using the OK key Use the RIGHT or LEFT keys to jump between All TV and the chosen FAV List o o o o First select the channels you would like to add to your favorite list using the UP and DOWN keys and press the WHITE Se
21. either be set to Auto Off or On In Auto mode the Receiver automatically changes to and from Summertime at the according dates 10 3 Parental Control To use the Parental Control function you will be asked to enter your access PIN code All parental control features work on a locking concept with the PIN code as your entrance key The default PIN code is set to 0000 29 e Change PIN code Use this function to change your PIN code to some other four digit number New PIN Enter a new four digit PIN code by pressing the OK key and using the number keys on your remote control Verify new PIN code Re enter the same new four digit PIN code once again to verify the new PIN code e Menu Lock After turning the Menu Lock to ON the complete Menu will require your PIN code to be entered before opening e Channel Lock After turning the Menu Lock to ON Channels that you set a lock on will require your PIN code to be entered before opening 10 4 A V Control In the Audio video menu you can modify the properties of the audio and video signals to suit your TV and audio equipment e TV Type Please select the video format consistent with your TV e Aspect ratio User can inform the receiver about the display aspect ratio of the TV that is connected to the receiver Possible choices are Auto 4 3 16 9 aspect ratios e Display Format If you select the display aspect ratio of TV as 4 3
22. er If you continue to use the product when defective serious damage can be caused to it Make sure to contact your local product distributor if the product is out of order Do not insert metal or alien substance into the slots for the modules or smartcards lt may cause damage to the product and reduce its life span The socket outlet shall be installed near the equipment and shall be easily accessible 2 QUICK SETUP 1 Check accessories Please check the giftbox for completeness of accessories Included should be Receiver Remote Control external Power Supply User Manual 2 Batteries Connect the Receiver to the TV Set Connect your Receiver with your TV Set Details can be found in the User Manual under chapter 4 How to connect your receiver Connect the Receiver with the Satellite Antenna Connect your Receiver with your Satellite Antenna Details can be found in the User Manual under chapter 4 How to connect your receiver Switch on the Receiver and TV Set Switch on the AC Power Switch on the rear side of the Receiver and then press the Standby button on the Receiver Front Panel see User Manual for more details Chapter 5 2 Front Panel and 5 3 Rear Panel Insert the Batteries Insert the 2 Batteries into the battery case on the underside of the Remote Control Please make sure that the Battery and Poles are correctly aligned Settings in the OSD Menu After the Receiver has booted it will display the On Scr
23. ervations Use the CURSOR UP and CURSOR DOWN keys to move to the reservation you want to change and either delete a reservation with the RED key or change the start or duration time using the blue key 18 6 5 Teletext Teletext application can be activated deactivated by pressing the TTX key The following operations are supported after activating Teletext e After activating text page 100 will appear after a short time e Specific Teletext pages can be selected using the number keys If the Teletext page is currently not available the last selected page will remain on the screen e The next Teletext page can be selected with the CURSOR UP key e The previous Teletext page can be selected with the CURSOR DOWN key 6 6 PVR Function When connecting an external Hard Disk Drive to the USB port the Receiver can be used as a PVR Digital Personal Video Recorder 6 6 1 Direct recording To start a recording press the REC Record key choose a duration with the LEFT RIGHT keys and confirm with the OK key 6 6 2 EPG Recording Via the EPG you can programme a Timer reservation Please also see 6 4 for more details 6 6 3 Timer Recording via manual Record List Alternatively to programming an Event via the EPG you can also programme an Event manually Start End Time Channel via the RECORD List Open the MENU and open the submenu MULTIMEDIA RECORDING LIST confirm with OK 19 6 6 4 TimeShift Function
24. formation of the current Event With the CURSOR RIGHT or CURSOR LEFT you can see the next event information Press again INFO key or the EXIT key to hide the banner and event information In Live TV Mode press the i INFO key to display the Information Bar This contains Information on the current Channel the current time the Current and Next Programme on this Channel Information on the Signal i Quality as well as Services broadcast 200 Me on this Channel i e Subtitles Naw 100 a HOS det he Hon Teletext press the i key again and provided this is broadcast by the operator you will see detailed information on the current programme press the lt gt keys to change to the next programme information Homes Under the Hammer Please note Programme information will only be displayed if it is included in the current transmission Availability and validity of program information is dependent on the broadcaster 14 In Live TV Mode press the OK key to open the Channel List move the Cusor key UP DOWN to move in the List channel by channel use the lt gt keys to jump 10 channels forward backward Choose your desired channel with the OK key Exit the List with the EXIT key Find a specific channel by pressing the FIND key on your remote control enter the first letters of the desired Channel and press the YELLOW key to jump to the search result in the Channel List Display Channels
25. g the broadcaster transmits also AC3 Sound can be chosen 6 3 EPG Electronic Programme Guide Now amp Next as well as 7 days Programme Information EPG application can be activated by pressing the EPG key when watching a TV programme or listening to a Radio Channel EPG application is divided into two levels The first level gives an overview of 10 continuous channels with information about present and forthcoming programmes By pressing the EPG key once more the second level provides information of all available events for the selected channel for the next 7 days Availability of Programme information data is dependent on the individual broadcaster By again pressing EXIT key you can close the EPG menu 16 Navigating on the first level of EPG Multi EPG E S l The currently active channel and the current programme are highlighted price Pone under hehann E Depending on how the EPG data is l i transmitted by the broadcaster it is Bi corsa possible that programme information TTT is not available until one has actually ae selected the channel Move the cursor 114 Privileged Heiima Preview up or down and confirm with the OK key to change to another channel in the list Orc Momm r y e F j N Move the cursor left or right to move to another time of the current day Use the blue key to advance to the next day and use the yellow key to go back by one day For your orientation please also note th
26. h on and assuming your satellite antenna has the according features To begin the Search for Channels on the set Satellites press the RED SCAN key and specify whether you would like to search for All Channels Free To Air Channels Scrambled Channels or Only TV Channels If you would like to perform a Network Search please change the according Option to On the receiver will then check the up to date channel information as searching services however this Search Option will increase the Search time Begin the Search by pressing RED 25 9 2 Satellite Search To perform a Channel Search on one Satellite please choose the Sub Menu Satellite Search Choose the Satellite you wish to perform the search on and in case you have not yet set up the antenna please press GREEN EDIT to make the according changes SePITITIiit Litt ititen HIG Choose between DiSEqC 1 0 up to 4 ports DiSEqC 1 1 up to 16 ports DiSEqC 2 0 Motor and USALS Motor and iHNHHHHHHHHI EET allocate the according port where i applicable Now either begin your search on the entire Satellite by E pressing RED START SEARCH or choose to search on a single TP MENU eii Left Right iDown el ae Enter Ln aa a K then please press GREEN TP SEARCH by setting the Search Mode in TP Search from Manual to PID and assuming that you know the according data you can also enter specific Video Audio and PCR PID
27. lect key to mark one or more channels and press the RED key to add to the chosen Favorite List If required use the GREEN A Z key to sort the channels in alphabetical order or use the BLACK FIND key to find a specific channel from the list Within the Favorite List you can delete a Channel from the FAV List by choosing the channel and pressing the RED DELETE key You can move a Channel using the BLUE MOVE key and select a group of channels by using the WHITE SELECT key and either delete or move the marked Channels When finished use the MENU or EXIT key to save your changes confirming with YES or abandon choosing NO 9 INSTALLATION This menu contains following items e Multi Satellite Search e Satellite Search e Default Setting 24 9 1 Multi Satellite Search To perform a Multi Satellite Channel Search please first choose the Satellites you wish to perform your search on You will notice after choosing the first satellite a window will open Please configure your antenna setting in this Sub Menu Choose between DiSEqC 1 0 up to 4 ports DiSEqC 1 1 up to 16 ports DiSEqC 2 0 Motor and USALS Motor and allocate the according port where applicable After performing the settings for the first satellite please confirm using the OK key Then choose the next Satellite you wish to set up and repeat as for the first Satellite In the same way set up all desired satellites that you would like to perform a searc
28. peed of your connected USB Hard Disk Drive suits the tasks you wish to perform SD For recording of SD channels HD For recording of HD channels HD Tms For recording of HD channels and TimeShift Playback Formatting After confirming with the OK key the HDD is formatted Please note All files on the Hard Disk Drive will be deleted when formatting 34 12 COMMON INTERFACE This receiver is equipped with one slot for Common Interface Cl 1 Open the flap on the front panel of the receiver 2 Insert the smartcard into the Cl module and the Cl module into the slot You can check the information of Cl module using this Sub Menu 35 13 CONDITIONAL ACCESS After opening the smartcard settings the menu will display details of the inserted IRDETO Smartcard Information includes settings and details on subscriptions age settings and changing of the PIN Code of the smartcard 14 SYSTEM The System Menu has 3 Submenus Information Software Upgrade Default Setting The Information Submenu is used to display information about the receiver and its hardware software and loader 14 1 Software Update OTA Software Update OTA is designed to be able to update your receiver Software via Satellite Over The Air Please first choose a TV Channel on the Astra 3A Transponder 12565 H for example STV1 STV2 or STV3 36 Press the MENU key and open the Sub Menu SYSTEM OTA using the keys
29. res OVERLOADING Do not overload a wall outlet extension cord or adapter as this may result in electric fire or shock LIQUID The product should not be exposed to liquid of any kind In addition no objects filled with liquid should be placed on the apparatus CLEANING Disconnect the product from the wall outlet before cleaning Use a light damp cloth no solvents to dust the product VENTILATION The slots on top of the product must be left uncovered to allow proper airflow into the unit Do not stand the product on soft furnishings or carpets Do not stack electronic equipments on top of the product ATTACHMENTS Do not use any unsupported attachments as these may be hazardous or cause damage to the product CONNECTION TO THE AERIAL Disconnect the product from the mains before connecting or disconnecting the cable from the aerial Failure to do so can damage the aerial CONNECTION TO THE TV Disconnect the product from the mains before connecting or disconnecting the cable from the TV Failure to do so can damage the TV LOCATION Place the product indoors to avoid exposing it to lightning rain or sun Do not place it near a radiator or heat register Make sure it has more than 10cm clearance from Do not block the openings with any object and do not place the product ona bed sofa rug or other similar surface If you place the product on a rack or a bookcase ensure that there is adequate ventilation
30. rol Unicable 1 0 1 2 amp USALS compatible Band Switch 22KHz Tone 22 4KHz Amplitude 0 6 0 2V Modulation method LDPC BCH DVB S2 8PSK QPSK DVB S QPSK LDPC BCH DVB S2 8PSK QPSK 10 30Msps Symbol Rate DVB S QPSK 1 45Msps Viterbi Decoding Rate 1 2 2 3 3 4 5 6 and 7 8 Bandwitdth 36MHz Punctured Code 1 2 2 3 3 4 3 5 4 5 5 6 8 9 9 10 LDPC BCH thereon MPEG Stream A V Decoding Demultiplex According to ISO IEC 13818 1 MPEG 2 System Input Stream Max 90Mbit s Aspect Ratio 4 3 default 16 9 letterbox ISO IEC 13818 2 MPEG2 Video MP HL Video Decoding ISO IEC 14496 10 HP L4 Video Resolution 576p 720p 1080i or 1080p Audio Dacodin ISO IEC 13818 3 MPEG2 Audio MUSICAM g Dolby AC 3 Audio Mode Single Channel Dual Channel Stereo Joint Stereo Video Output HDMI RCA 40 Front Panel Display 7 Segment Display 1 Common Interface 1 Irdeto card reader A V Output Digital Output HDMI Audio RCA 2 Outputs left and right Audio Digital S PDIF optical Rear Side Input F Type Connector Video Audio L R RCA Video Audio L Audio R S PDIF optical HDMI 1 3 USB 1 rear side USB 2 0 Port IR Connector for external IR Sensor 1 RS 232 Port 41
31. to search for a single Channel 9 3 Edit TP List In due time and by new Frequencies constantly being added by the Satellite Operators some transponder data will need editing Enter the Sub MENU INSTALLATION SATELLITE SEARCH choose your desired Satellite confirm with OK and press the YELLOW TP key In the EDIT TP List Submenu you can either manually Em mo Edw add a TP Transponder by pressing 23 8F ASTRA 3A 10632 22000 H Seiten HME 2 Peach OMe 7 26 the GREEN ADD TP key or make changes to existing ones Please use the LEFT RIGHT keys to move the cursor to the desired TP Press the BLUE TP Edit key to make the required changes only advised for expert users If you want to search on only one TP after choosing the desired TP you can use the RED TP Search key Here you can also make changes to specific Video Audio and PCR PIDs after changing the Search Mode to PID 9 4 Default Setting In this menu you can delete all channels for TV or Radio Additionally you can perform a factory reset to set back Channels the Configuration to the original state as well as perform a Default Setting Default Settings can be chosen for gt Delete Channels Choose to delete either All Channels TV or Radio Channels only gt Factory Reset The original Factory Programming is re loaded either for all All Parameters Default Setting only Channels or only Configuration
Download Pdf Manuals
Related Search