Home

Ifu - Retractable - Simplified Safety

image

Contents

1. CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 RE CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 ASS CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken Mark on the retractable label that the device has been inspected Failure to do so voids warranty of product Splines aaa aye HOTA Psy Ao a E T i T F a a at E Guardian Fall Protection Inc 800 466 6385 26513 79 Ave S Kent WA 98032 www guardianfall com lf unit fails inspection REMOVE a FROM SERVICE AND DESTROY ry _
2. galvanized wire cable SRL also comes with a carabineer and tag line to be used with the device to avoid improper use PRODUCT APPLICATION INFORMATION The SRL is used in a stationary or mobile manner As a stationary device the SRL would be mounted to an approved fixed anchorage connector directly overhead The SRL would extend as the user moves away from the anchorage point and retracts as the user moves back towards the anchorage point As the SRL is used in a mobile manner the device would be traveling on a steel cable rope or fixed rail traveling from one anchorage connector to the other LIMITATIONS Consider the following application limitations before using this equipment e Capacity The SRL is to be used by an individual with a combined weight person clothing tools etc of 90 pounds minimum and no more than 310lbs maximum No more than one person may be connected at one time e Corrosion Leaving the SRL in an environment for long periods of time that could cause corrosion of metal parts is not warranted in any way and must not be done Use caution when working around corrosive compounds such as ammonia sewage fertilizers seawater or other corrosive environments may require more frequent inspections or servicing These increased inspections and servicing are required to ensure corrosive damage is not impacting the performance of the SRL e Chemical Hazards and Heat Extreme caution must be taken when working in or around environ
3. person When more than one personal fall arrest system 1s attached to the same structure the strength requirements stated above must be multiplied by the number of personal fall arrest systems attached to the structure Horizontal Systems and Tripods In applications where an SRL is used in conjunction with a horizontal system or with a tripod or davit arm ensure the support structure and or the horizontal system components are compatible Horizontal systems must be designed and installed under the supervision of a qualified engineer Anchorage Selection Select a anchorage point capable of support at least 5 000 Ibs Additionally select a location for anchorage of the SRL that will avoid a free fall and swing fall hazards To prevent an increased free fall distance do not work above the anchorage location Free Fall Personal fall arrest systems must be rigged so the potential free fall is never greater than six feet Avoid slack in the line and do not lengthen the SRL by connecting a lanyard or other snap hooks directly to the retractable Do not use this device at or below your feet This will increase your free fall distance beyond the allowable limits set by OSHA and exceed the capabilities of the SRL to safely arrest a free fall Swing Falls Swing fall will occur when the anchorage point is not directly over the head of the worker or directly above the point where a fall occurs The force of striking an object in a swing fall may cause serious in
4. 2 in Maximum arresting force 900 ibs Powerful spring inside do Lifeline Material 1 polyester web 25 mm large sangle Capacity Charge maximum 75 310 hs Single user only Z Oft 11ft Yellow Jacket Cable Retractable 10950 10951 INSPECTION AND MAINTENANCE LOG ALL EDGE RETRACTABLES EXCLUDING THE 11FT WEB UNIT MUST BE SERVICED EVERY TWO YEARS FROM DATE OF FIRST USE LIFT WEB RETRACTABLE MUST BE INSPECTED EVERYDAY AS ANY OTHER RETRACTABLE DEVICE SERIAL NUMBER Log unit serial number found on backside of label MODEL NUMBER Model number found on backside of label DATE PUCHASED DATE OF FIRST USE INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 i ae CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed PA A CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPE
5. CTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 le CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 PEER CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 eal a CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 A ea a CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in t
6. Guardian Fall Protection Kent WA 800 466 6385 www quardianfall com GENERAL SYSTEM SELECTION CRITERIA Selection of fall protection shall be made by a Competent Person All fall protection equipment shall be purchased new and unused GUARDIAN FALL PROTECTION PERFORMANGE SAFETY GEAR Components shal not be used for anyother operation other than that which thas been designed and approved Fall Arrest Systems shall be designed to comply with OSHA or applicable state regulatory limitations Systems must be used in a compliant manner PART NUMBERS 10900 10901 11ft Web Retractable Fall Restraint systems shall be designed by a Qualified Person and must be 10950 11ft Yellow Jacket Galvanized Cable installed and used under the supervision of a competent person 10952 11ft Yellow Jacket Galvanized Cable w Rebar Hook 10954 11ft Yellow Jacket Galvanized Cable High Strength Consult a doctor if there is any reason to doubt a user s ability to withstand and safely absorb fall arrest forces Age fitness and health conditions can seriously 10946 11ft Yellow Jacket Galvanized Cable Heavy Duty affect the worker should a fall occur Pregnant women and minors should not 10956 11ft Yellow Jacket Galvanized Cable w non indicating use this equipment Snaphook 10970 11ft Yellow Jacket Synthetic Cable WARNINGD Custom Part DO NOT Retractable Lifelines e Do not alter or misuse this equipment e Do not use combinations of components
7. PECIFICATIONS 11ft Web Retractable 10900 10905 10906 WE d oh ie iad O GUARDIAN FALL PROTECTION PERFORMANCE SAFETY GEAR guria Pr mia fan elbe 5 ps yardian Premium on i Edge R O Hi GUARDIA FALL PROTECTION PERFORMANCE SAFETY GEAR Serial numbered for tracking purposes ees INSPECTION Before cach use inspoct this prodwct at time of shipment a followed per user manual including locking for proper use maintenance and inspection unction pull sharply to test retraction Alteration or misuse of this product or tallure tuaction lifeline condition function and to follow instructions may result in serious Condition of connectors housing and Injury or death Not user repairable fasteners legibility of labels and any i A USE Ancherage strength requirement 5000 ibs parts inspection by a competent person 22kH Attach unit as directly above work area as required at least annually see our manual possible to reduce swing fall hazard Oe not work inspect shock absorber fer sigas of previous deployment or load Torn or stretohed plastic on shock pack is an a e J indication that an impact has occurred before uss See user manual for more detalis and the unit must be removed from service H used to arrest a fall remove SPECIFICATIONS Average locking from service Do not use If Inspection 4 5 ft s arresting distance speed Maximum ng reveals an unsafe condition 4
8. are to be considered a mechanical device or a Self Locking Anchorage Device or a Self Retracting Lifeline SRL This device is used to safely expand the working area where a harness with a 6ft lanyard is not adequate Also a SRL is designed to reduce the shock loading to the body of a worker by limiting the distance of a fall The device allows for complete freedom of movement The SRL is to be considered part of a personal fall arrest system The SRL is to be used as part of a complete fall arrest system PFAS most commonally include the use of a full body harnees anchorage connector such as a carabiner and the SRL GUARDIAN PREMIUM EDGE SERIES 11FT WEBBED SELF RETRACTING LIFELINE Includes a carabineer for attachment to an approved anchor point SRL also includes a double locking snap hook All 11ft retractables include a shock absorbing pack as a part of the 1 inch wide nylon web lifeline Additonal option may include a swivel snap hook with an impact load indicator GUARDIAN PREMIUM EDGE SERIES 20FT WEBBED SELF RETRACTING LIFELINE Includes a swivel eye anchorage self locking swivel snap hook with impact indicator and 1 inch wide nylon web in the length of 20ft SRL also comes with a carabineer and tag line to be used with the device to avoid improper use GUARDIAN PREMIUM EDGE SERIES 20FT 25FT and 30FT GALVANIZED SELF RETRACTING LIFELINE Includes a swivel eye anchorage self locking swivel snap hook with impact indicator and 3 16
9. eceleration Distance e Movement of harness attachment element D ring Free Fall Distance 6 Feet Max Worker Height how tall the worker is pene could affect the free fall distance Elevation of Anchorage Connector Connecting Subsystems Length Total Fall Distance Free Fall Deceleration Distance 4 gt APPLICABLE STANDARDS Refer to potential applicable standards Standards might include OSHA regulations depending on the type of work and also might include state regulations if applicable Consult regulatory agencies for more information on personal fall arrest systems and associated components This product is designed to comply with OSHA and ANSIZ359 1 standards when used properly and in accordance with manufacturer s instructions LIMITATIONS CONTINUED Swing Falls Swing falls occur when the anchorage point is not directly above the point where a fall occurs The force of striking an object in a swing fall may cause serious injury or death Minimize the risk of swing falls by working as close to the anchorage point as possible Do not permit a swing fall if injury could occur Swing falls will significantly incre lifeline or other variable length connecting system is used ATTACH TO OVERHEAD ANCHORS SWING FALLS INCREASE ase the clearance required when a self retracting FALL ARREST DISTANCE a Potential Environmental Hazards Use of fall protection equipment in areas with environmental ha
10. ed to standard size D rings or similar objects which will result in a load on the gate if the hook or D ring twists or rotates Large throat snap hooks are designed for use on fixed structural elements such as rebar or cross members that are not shaped in a way that can capture the gate of the hook PERSONAL FALL ARREST INFORMATION Personal Fall Arrest System PFAS Personal fall arrest systems used with this equipment must meet applicable state federal OSHA and ANSI requirements A full body harness must be worn when this equipment is used as a component of a personal fall arrest system As required by OSHA the personal fall arrest system must be capable of arresting the user s fall with a maximum arresting force of 1 800 Ibs and limit the free fall to six feet or less Do not alter or intentionally misuse this equipment Consult with GFP when using this equipment in combination with components or susbsystems other than those described here in this manual and or other information Use caution when using this equipment around moving machinery electrical and chemical hazards and sharp edges OPERATION USE and PLAN Anchorage The anchorage to which the SRL is attached must sustain static loads applied in the directions permitted by the fall arrest system of at least 3 600lbs with certification of a qualified person or 5 000lbs without certification Refer to OSHA and ANSI for specific definition This device is to only be used by one
11. his manual 1 Example Cable lifeline frayed 2 AA CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed a Ce CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 a ae ae CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 A a CORRECTIVE ACTION TAKEN Example Retractable taken out of service and returned to Guardian Fall Protection APPROVED BY DATE Who approved inspection and corrective action taken INSPECTION DATE Mark date of inspection INSPECTION ITEMS NOTED Refer to inspection guidelines in this manual 1 Example Cable lifeline frayed 2 ee
12. in anyway Make sure the swivel eye turns freely Step 3 The lifeline must fully extend and retract without hesitation or creating a slack line condition Step 4 Ensure the device locks up when lifeline is jerked sharply Step 5 The labels must be present and fully legible with inspection log information completed Step 6 Look for signs of corrosion on the entire unit Step 7 Wire rope inspection must include identifying cuts kinks broken wires bird caging corrosion welding splatter chemical damage or severely abraded areas Check all thimbles etc for excessive wear including cracks or separation of metal components Step 8 Webbed lifeline inspection must include identifying frayed strands broken webbing burns cuts and abrasions Inspect for excessive heat paint build up soiling rust or chemical damage indicated by brown or discolored areas Step 9 Inspect connecting hooks or carabiners for signs of damage corrosion or excessive wear Step 10 Record inspection results in the inspection and maintenance log found in this manual Clearly check off month the SRL was inspected on the label of the housing CABLE INSPECTION When inspecting SRL s that utilize cable lifelines it is critical to look for the following damages and deterioration that will result in malfunction of the unit and potentially unsafe conditions Crushing The cable will often get crushed or bent while being used on a job site Cable that is cr
13. jury up to and including death Minimize swing falls by working as directly below the anchorage point as possible In all situations where a swing fall can occur the likelihood of an injury can occur Please contact Guardian Fall Protection if you have questions on a particular application involving one of our retractables Fall Clearance Ensure that there is always adequate clearance in the path of a fall to avoid striking an object or lower level A minimum of six feet from the working level to the lower level or nearest obstruction is recommended as long as the SRL is attached directly over head of the worker and the worker is not in danger of injury as a result of a swing fall hazard Sharp Edges Unprotected and sharp edges can damage the lifeline Please make sure to avoid working where this can occur and provide protection where possible A Guardian manufactured energy absorbing device can be added to aid in reducing the impact forces on the entire device For more information on this product please contact Guardian Fall Protection directly No alterations to Guardian products is allowed INSPECTION OF SELF RETRACTING LIFELINES If inspection reveals an unsafe or defective condition remove the product from service and send product back to Guardian Fall Protection or a GFP authorized service center e Before each use of this equipment inspect it according to the following guidelines A formal inspection of fall protection products components m
14. loyee has been trained as necessary by a Competent or Qualified Person in the nature of fall hazards in the work area the correct erecting maintaining disassembling and inspection of the fall protection systems being used and the use of personal fall arrest systems RESCUE PLAN The user is required to have a rescue plan and the means at hand to implement it when using the equipment The plan shall be project specific Employees shall be trained in self rescue or alternate means shall be provided for prompt rescue in the event of a fall IF EQUIPMENT IS SUBJECTED TO A FALL Remove the equipment from service immediately if it has been subjected to the forces of a fall arrest Contact your distributor or Guardian about policies regarding replacement of Guardian components involved in a fall INSPECTION e Only the manufacturer of this equipment or persons or entities authorized in writing by the manufacturer shall make repairs to fall protection equipment e The date of first inspection should be recorded by the employer on the equipment and any serial numbers shall be recorded on the Inspection Log e Formal inspections shall be made by either a Competent or Qualified Person on at least a semi annual basis PRIOR TO EACH USE e Fall protection equipment shall be inspected by the user for defects damage or deterioration e Any suspected defective equipment shall be removed from service e Ifthe manufacturer s label is not legible
15. ments containing acid or caustic chemicals particularly at elevated temperatures Damage will result to GFP SRL s in this environment Chemical damage is difficult to detect and it is recommended that the lifeline be replaced periodically to ensure safety of the workers Additionally this SRL is not to be used in high temperature environments The SRL must be protected when using near welding metal cutting or similar activities Hot sparks and slag can damage this equipment Users must inspect SRL prior to each use e Electrical Hazards For web and wire rope models there is a possibility of an electric current flowing through the lifeline Moisture absorbed by the lifeline may provide a path for electrical current to flow resulting in electrical shock Use caution where the lifeline may contact high voltage power lines e Locking Speed Extreme caution should be taken when using this device whereas an obstructed fall could occur as well as when someone must perform work in a confined or cramped space Working in these types of environments could limit the speed at which the locking mechanisms engage Extreme caution should be taken when working on low pitched roofs where a worker may slide instead of fall A clear path is required to ensure positive locking of the SRL Capacity The SRL is for use by one person with a combined weight person clothing tools etc of 95lbs minimum and 310lbs maximum Consider When Calculating Distance e D
16. or is missing the equipment shall be removed from service Fall protection equipment shall be removed from service upon evidence of defects damage or deterioration or upon expiration of the manufacturer s specified service limits whichever comes first Consult with your doctor if there is reason to doubt your fitness to safely absorb the shock from a fall arrest Age fitness and health conditions can seriously affect a worker s ability to withstand falls Pregnant women or minors must not use any Guardian Fall Protection equipment MAINTENANCE CLEANING AND STORAGE Repairs to equipment can be made only by a Guardian representative or person or entity authorized by Guardian Contact Guardian for maintenance and repair Cleaning after use is important for maintaining the safety and life of the equipment Cleanse the equipment of all dirt corrosives and contaminants If the equipment cannot simply be wiped clean use a mild soap and water Rinse wipe and hang to dry Store equipment where it cannot be affected by heat light excessive moisture oil chemicals or other degrading elements This device unless otherwise indicated must be returned for factory servicing every two years from the date of first use This device must also be returned if the product fails any daily inspection load indicator has been activated or a competent person has deemed the equipment unsafe DESCRIPTION OF PRODUCT Retractable All Guardian Retractables
17. or subsystems DO NOT THROW AWAY THESE INSTRUCTIONS that may affect or interfere with the safe compatible READ AND UNDERSTAND BEFORE USING EQUIPMENT IUNE HOROT GACT OMe e Do not expose the equipment to chemicals which may produce a harmful effect or degrade the equipment Consult manufacturer in cases where doubt exists Do not use the equipment around moving machinery or electrical hazards unless specifically designed for such use e Do not use the equipment around sharp edges or abrasive surfaces unless intended for such use This manual should be read and understood in its entirety and used as part of a training program as required by OSHA or any applicable state regulatory agency This and any other included instructions must be provided to the users of the equipment The user must understand the proper equipment use and limitations User must keep a copy of these instructions for reference and training This product meets all applicable OSHA and ANSI standards for fall protection TRAINING REQUIREMENTS The employer shall provide a training program for each employee who might be exposed to fall hazards The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards Relevant Federal State and local regulatory requirements procedures and standards shall also be a part of training The employer shall ensure that each emp
18. ractable is used in these environments the retractable lifeline needs to be closely examined for damage If you have any questions in terms of damage to the retractable or further explanation of the above information is needed please call 1 800 466 6385 PLAN THE FALL PROTECTION SYSTEM Before installation plan your system Consider all factors that will affect your safety during use of this equipment The following list gives important points to consider when planning your system Anchorage Select a rigid anchorage capable of supporting the loads no less than 5 000 Ibs per worker attached Sharp Edges Avoid working where system components may be in contact with or abrade against unprotected sharp edges After a Fall Components which have been subjected to the forces of arresting a fall must be removed from service and destroyed Retractable must be returned for servicing to GFP or an authorized repair center Rescue The employer must have a rescue plan when using this equipment The employer must have the ability to perform a rescue quickly and safely INSTALLATION REQUIREMENTS The following requirements outline the proper installation procedures to be followed Location Select a location on an appropriate strength anchorage that will provide overall safety and proper loading The anchorage must be free of deformities or defects that may weaken the structure The anchorage to which the SRL is attached must be capable of sustaining s
19. tatic loads in the directions applied by the personal fall arrest systems of at least 3 600Ibs with certification of a qualified person or 5 000Ibs without certification When more than one person is attached to the same structure the strength requirements stated above must be multiplied by the number of personal fall arrest systems Do not work above the anchorage point While using an SRL always ensure that there is constant tension on the cable Slack in the cable could result in an increase in fall distance Move normally as sudden jerky movements will allow the locking mechanism to engage Do not install in an area where a swing fall hazard potentially could exist Failure to do so could result in injury or possibly death Keep these instructions for reference If inspection reveals an unsafe or defective condition remove the Self Retracting Lifeline from service and send back to Guardian Fall Protection or an authorized repair center TRAINING It is the responsibility of the user and the purchaser of this equipment to assure that they are familiar with these instructions trained in the correct care and use of and are aware of the operating characteristics application limits and the consequences of improper use of this equipment Training should be conducted without exposing anyone to a fall hazard Training should be repeated on a periodic basis in accordance with your organizations policy and compliance with OSHA regulations S
20. ushed or bent will damage the retractable and thus the unit should be immediately taken out of service and returned to Guardian or an authorized repair center Cutting Movement over sharp edges or other objects while the cable is under tension can result in damaged strands and broken wires If through inspection of the retractable lifeline prior to each use it is found to have any broken strands immediately remove from service and return to Guardian or an authorized repair center Abrasion Abrasion can result from normal wear Particular attention must be paid to the outer wire strands as they will appear to be flattened and or shiner than other parts of the cable If through inspection of the retractable lifeline prior to each use it is found have damage or deterioration from abrasion immediately remove from service and return to Guardian or an authorized repair center Kinking Any deformation in the cable whereas the lifeline appears to be bent requires the retractable to be immediately removed from service and returned to Guardian or an authorized repair center Corrosion Arc or Heat Damage Extreme caution must be taken to avoid any potential damage as a result of using a retractable within an environment where corrosive compounds welding or high heat may exist Corrosive damage could cause the cable to crack Welding damage would result in fused wires and thus change the characteristics of the strength with regards to the wire If the ret
21. ust be performed at least every six months by a competent person other than the user The frequency of formal inspections should be based on conditions of use or exposure Record the inspection results in the inspection and maintenance log at the end of this manual OSHA 1910 66 OSHA 1926 502 and ANSI Z359 1 requires an inspection of equipment before each use Annually ANSI requires a formal inspection of the SRL be completed by a competent person other than the user at least twice a year More formal and frequent inspections maybe required based upon the severity and environmental conditions of the workplace After a Fall Arrest Inspect the impact indicator on the snap hook of the SRL and look for an exposed red color band Do not attempt to reset the impact indicator Remove the retractable from service immediately and return to Guardian or an authorized repair center If using a retractable with a webbed lifeline then inspection of the shock pack is required Remove retractable from service if there are any deformation elongation or other signs of the shock pack being torn or deployed If inspection reveals an unsafe condition remove unit from service immediately and destroy or contact an authorized service center for repair Inspecting the SELF RETRACTING LIFELINES Step 1 Inspect for loose screws and bent or damaged parts Step 2 Inspect housing for distortion cracks or other damage Ensure the swivel eye is not damaged or distorted
22. zards may require additional precautions to prevent injury to the user or damage to the equipment Hazards may include but are not limited to chemicals corrosive environments high voltage power lines gases moving machinery and sharp edges SYSTEM REQUIREMENTS Compatibility of Components Guardian Fall Protection equipment is designed to be used with Guardian approved components Please contact Guardian if you have a question regarding compatibility Making substitutions without approval from Guardian Fall Protection may lead to injuries and or death by compromising the safety and reliability of the complete system A Qualified person can make a determination on compatibility of equipment from different manufacturers If in doubt please contact Guardian Fall Protection for clarification Compatibility of Connectors Connectors D rings hooks carabiners must be capable of supporting at least 5 000 Ibs 22kN Do not use equipment that is not compatible Non compatible connectors may unintentionally disengage Self locking snap hooks and carabiners are required by ANSI and OSHA Connectors must be compatible in size shape and strength Making Connections Only use self locking snap hooks and carabiners with any Guardian Fall Protection equipment Do not use equipment that is not compatible If you have any questions on compatibility please call Guardian Fall Protection at 800 466 6385 Large throat opening snap hooks should not be connect

Download Pdf Manuals

image

Related Search

Related Contents

20380 - CÔMODA 4 GAVETAS 1 PORTA BELLY(passo-a  Point Of Care Testing - University of California, San Francisco  quickTerm Plug-In Guide - Kaleidoscope Golden Releases  GWSProfessional - Electrocomponents  NOTA DE SERVICIO INTERIOR  Lipid Data Analyzer 1.6  Descargar - Emerson Climate Technologies  

Copyright © All rights reserved.
Failed to retrieve file