IQR4D User Manual
Contents
1. Playback Version 2 3 0 4 File kuasa View Play Help Bixanets Settings Video Play cai iI video Channel Split 5 Setting First Video Bar Of Multiple Disk Processor Amplification Control Second Video Bar Of Multiple Disk Third Video Bar Of Multiple Disk Fourth Video Bar Of Multiple Disk Select the channel audio to be played and then click OK Audio Channel Setting Sound Setting Has Sound Data Channel Channel to Cancel Apply lIQCCTV IQR4D 4 Camera DVR Appendix 1 Frequently Asked Questions 10 11 How do I recover a forgotten password Please contact a technician or the manufacturer if you have forgotten the password Please set a safe password that is easy to remember don t set simple passwords like 123456 There is no video output signal Please confirm that the video output port is connected to the VIDEO OUT and ensure that the BNC inputs from the cameras are connected properly at the back of the DVR Additionally ensure that the DVR is correctly for NTSC or PAL settings The system cannot detect the hard drive If the system cannot detect the hard drive please confirm that hard drive data cable is connected properly to the power cable and the main motherboard We recommend re plugging hard drive data cable again Also ensure that correct power adaptor is DC12V 3A the range is 3A 5A Additionally Seagate branded hard drive are also recommended What is the affect to equ2. M ooD M oDD 001 001 001 NEXT PAGE DEFAULT APPLY EXIT CHANNEL selecting the channel to which the dome camera is connected to select any of the latter 4 channels click Next Page PROTOCOL The dome protocol of the corresponding brand and model Pelco D or Pelco P BAUD RATE The baud rate used by the dome 4 options of 1200 2400 4800 and 9600 DATA BIT Options of 5 6 7 and 8 8 by default STOP BIT Options of 1 and 2 1 by default VERIFY 5 options of None Odd Even Mark Space None by default ADDRESS Complete the PTZ camera number of the corresponding channel Please Note Use protocol baud rate and address code in order to set the PTZ 3 7 7 Network setup Enter the Network screen from Main Menu gt Advanced as shown below TYPE STATIC MEDIA PORT 09999 WEB PORT 00124 IP ADDRESS 192 168 001 197 SUBNET MASK 255 255 255 000 GATEWAY 192 168 000 001 DNS 210 021 196 006 UPNP ON M DONS SETTINGS DEFAULT APPLY EXIT TYPE 3 Options static configuration DHCP and PPPOE STATIC Allocating an IP address manually DHCP Acquiring an IP address automatically After selecting the DHCP mode restart the system after confirmation After starting the system will establish a connection with the DHCP server automatically When this is successful this unit will be allocated an IP address which will be displayed on the screen PPPOE broadband dial up netw
3. Overview 1 1 Introduction This IQR4D is a low cost 4 Camera DVR with remote and mobile phone access The DVR adopts the industry s most advanced technology including H 264 compression codec providing the highest picture quality but efficient use of recording space The DVR s body is designed as a stylish small form that allows it to be stored away discreetly 1 2 Packaging and accessories Following parts are included in the package 7 IQR4D DVR R remote controller x2 Batteries for the remote controller Instruction Manual Power Adapter Central Management Software CMS CD 1 3 Main features Standard H 264 video compression format 16 bit true color semi transparent graphical menu interface menu options tip A variety of recording modes manual timing motion and alarm recording Optimized 4 Channel simultaneous playback A variety of backup USB drives mobile hard drives or via networks X2 USB ports x1 USB2 0 for data backup x1 USB1 1 for the mouse operations Multi functional Operation recording playback monitor backup and network transmission can be realized at the same time _ Dual stream technology Support network to implement multi screen real time browsing parameter setting copy or playback Support mobile phone monitoring for remote access Support event classification and precise time search and playback Defaulted parameter value fast recovery Flexible USB inte
4. lIQR4D 4 Camera DVR with Real Time D1 Recording and Mobile Internet Access User Manual TECHNICAL SUPPORT For Technical Support please contact your local distributor LIMITED WARRANTY This product is supplied with a 1 Year warranty The Warranty excludes products that have been misused including accidental damage and damage caused by normal wear and tear In the unlikely event that you encounter a problem with this product it should be returned to the place of purchase CE H ROHSZ IQCCTV IQR4D 4 Camera DVR Notes m The power supply of this DVR is provided through DC12V 3 Amp adapter Please check the power outlet before installation and ensure it can meet the requirements of adaptor 7 Do not place the DVR at a place subject to rain or moisture 7 Do not install the DVR at a place subject to violent vibration 7 Do not install the DVR at a place subject to direct sunlight and be far away from heat and high temperature environment 7 The back panel shall be 15cm or more away from other objects or wall to facilitate fan cooling 7 The DVR shall work under temperature humidity and voltage according to its technical specifications 7 The DVR should not be stored with corrosive chemicals that may produce volatile gases 7 The DVR shall be installed in a space without much dust and the environment should be kept clean and tidy 7 Proper grounding shall be installed during operation 7 DVR should be inst
5. pan Settings No Logs Block Sit ek Account Name if Required MR814v3 Pia ke Seger IRR Sea ie co a MI Domain Name if Required Schedule E mail Internet IP Address Get Dynamically From ISP Router Status se Static IP Address Attached j 2 Devices IP Address e Je fe Backup Settings IP Subnet Mask 28s 288 285 0 Sar passat Gateway IP Address e je Je ja Router Upgrade Domain Name Server DNS Address Port Forwarding Get Automatically From ISP WAN Setup Use These DNS Servers Primary ON 4 f2 2 Api LAN IP Setup sy the l l i Wireless Setup Secondary ONS a ig n fe p Dynamic DNS Router MAC Address Static Routes Use Defaull Address Remote Ouse Computer MAC Address Management es Ouse This MAC Address 00 0f b5 7c 24 6b UPnP Knowledge Base Documentation Appl IQCCTV Step 3 Select the service you want to forward IQR4D 4 Camera DVR We re using HTTP web server in this example You can choose from the other pre defined ones available or define your own custom service using the Add Custom Service button to use PC Anywhere or Remote Desktop for example NETGEAR SMARTWIZARD router manager Wirolass Routor modal MREB IA wF Setup Wizard Port Forwarding Basic Settings Serice Maine Server IP Achiess J Serre yar Ts m finta ra e an HTTP t92 168 lo il Wireless i AT w Settings Logs Block Sites Block Senices Schedule E mail Add Custom Semice Rouler S
6. FILE LIST TYPE ALL FIRST CH TIME SIZE TYPE BAK pre 1 00 00 00 00 59 1M NORMAL NEXT 2 00 00 01 00 59 59 172 2M NORMAL ast 3 00 00 01 00 59 5M NORMAL 4 00 00 01 00 59 8M NORMAL 5 00 00 02 01 00 6M NORMAL OTHER 6 00 00 02 01 00 00 172 4M NORMAL BACKUP z EXIT Please Note The File List detailed above CH Channel on which the file was recorded TIME Start End times of recorded file Size Size of the recorded file in MB Type Recording Mode type with the two options of normal and alarm To export data to a USB memory drive select the relevant files check box labeled BAK and then select the Backup option at the bottom right corner of the screen IQCCTV IQR4D 4 Camera DVR 7 When you have selected a certain record file from the record list i e by moving the cursor up and down press Enter to access the playback screen m If Record Time Superimposition has already been enabled in the Basic Setup screen the playback screen will display the clock of recording if Record Time Superimposition is set as Off in the Basic Setup screen there will be no clock display on the playback screen 7 During record playback press Slow for slow play press Fast Forward for fast forward Fast Backward for backward play or press Pause Frame for pause or frame by frame play press Exit to exit from the playback scre
7. gt Mobile Phone Monitoring DEFAULT APPLY Hi Service port with a setting range of 1 024 65 535 this port has to be mapped on the router and its setup method is the same as the mapping method of the port in network setup Please Note For more detailed mobile phone installation please refer to the Mobile Phone User Manual in the CD 3 7 5 System maintenance Enter the Maintain screen from Main Menu gt Advanced as shown below SYSTEM PROTECT AUTO RESET ON SETTINGS EVERY DAY SYSTEM UPDATE DEFAULT SETTINGS RESTART DEFAULT APPLY EXIT A AUTO RESET When this option is set to On the user can set the restart frequency and time of this device himself herself B SYSTEM UPDATE Plug into the USB slot of the DVR a suitable USB drive containing the updated firmware and press Enter to commence the system update The screen will display the progress box of system updating until updating is completed The power system should not be interrupted during updating C DEFAULT SETTING Restore the system parameters to the default settings D RESTART Restart this unit IQCCTV IQR4D 4 Camera DVR 3 7 6 PTZ Enter the PTZ screen from Main Menw gt Advanced as shown below GQ mm oO PTZ SETUP CHANNEL CH1 CH2 CH3 CH4 PROTOCOL PELCO D PELCO DM PELCO DM PELCO D BAUD RATE 2400 4 9600 M 9600 9600 DATA BIT 8 M 8 8S wi 8 M STOP BIT Lo 1 M e 1 NONE N ob
8. Simply plug the USB mouse into the corresponding ports on the back of the DVR and it is ready to use Enter system main menu real time screen preview single mouse left Single left click the functional menu icon and enter menu setting page The image in a channel can be enlarged by double clicking real time monitoring and playback screen It can be recovered into monitoring and multi view image after double clicking again Access to volume adjustment color adjustment and PTZ control menu the volume adjustment color adjustment and PTZ control can be set only one channel at a time Please select corresponding screen if multi screen mode is on prior to setting Volume adjustment and PTZ control PTZ control is available if clicking direction or and icon There is a volume bar in volume control interface Move mouse to a position and click right button the corresponding volume will be shown in the right side of the volume bar click x to exit Colour adjustment operates the same way as volume adjustment Menus items with multiple options can be seen by left clicking and a drop down menu will be shown Fast forward backward functions can be operated by left clicking within video playback interface Clicking the left or right button will activate the soft keyboard within input boxes Click left button and move to adjust the parameters within the Volume Colour adjustment interface Click left butto
9. click this file or click Playback to play it A control bar will appear at the bottom of the picture for pause stop fast forward slow play and next frame control Click Backup This file will be saved in the designated directory directly see Figure 4 10 for the saving directory IQCCTV IQR4D 4 Camera DVR 4 6 Recording mode Click Setup gt RECORD to enter the remote recording mode as shown below gt ON 3 POWER gt TIMED 12 2 4 8 7 leje 0 ti 2 ta saj 15 18 17 18 13 20 21 22 231 DEFAULT APPLY The setup method is the same as the mainframe menu See Recording Mode in Chapter 3 for details Note Detail can be set in 4 channel DVRs only 4 7 Alarm setup Click Setup gt Alarm to enter the Alarm Setup screen as shown below ALARM STATUS v v v ALARM MANAGE OUTPUT BUZZER POST REC DEFAULT APPLY The setup method is the same as the mainframe menu See Alarm Setup in Chapter 3 for details IQCCTV IQR4D 4 Camera DVR 4 8 PTZ control Click Setup gt PTZ to enter the PTZ Control mode See Figure 5 6 PROTOCOL ADDRESS BAUD DATA BIT STOP BIT VERIFY DEFAULT APPLY See Chapter 3 Network Setup in this manual for the setup method 4 9 Network setup Click Setup gt Network Setup to enter the Network Setup mode as shown below See Chapter 3 Network Setup in this manual
10. for the setup method TYPE MEDIA PORT WEB PORT IP ADDRESS 192 168 SUBNET MASK P55 a 255 5 PSRs GATEWAY m8 tat DNS 21 196 6 DEFAULT APPLY IQCCTV IQR4D 4 Camera DVR 4 10 System setup Click Setup gt Setting to enter the Setting screen as shown below INTERNET IE PASSWORD USER PASSWORD RE ENTER ADMIN PASSWORD RE ENTER DEFAULT APPLY A INTERNET setting the code stream the higher the code stream is the clearer the remote image will be but the network bandwidth must be high otherwise the image may have a delay B FILE SAVE PATH setting the record saving directory during remote recording and remote backup C IE PASSWORD setting the IE login password Note This password may be cleared in the main menu of the DVR 4 11 Host info Click DVR HOST to enter the Host Info screen as shown below View the operating state of the hard drive the time remaining and the software version and MAC address of this system HDD STATUS 1266872724G 12568746916 AVALABLE TE SOFT VERSION 20100915 IQCCTV IQR4D 4 Camera DVR Chapter 5 Client software amp Player 5 1 Client software Open the Client software file operate one of these two files and install it according to the remarks HetDvr msi _ Pitted indis Installe i 5 456 EP l setup exe Setup Once installed the open the software and the user will be prompted with a Login interfac
11. lIQCCTV IQR4D 4 Camera DVR RECORD SEARCH CHN ALL i DATE 2010 04 26 SEARCH 19 35 PLAY RECORD STATE OCT o1 o2 03 04Jo5 06 o7 o8 09 10 11 12 13 14 15 16 FILE CIST S Month displaying the record information of every day in the current month A green block indicates normal recording a red block indicates alarm recording and the background color indicates no recording Click a date on this bar to search the recorded information of every hour of that day The search results will be visualized in the Day bar below Date displaying the recording hours of the current day Each box represents 1hr and one recording segment is 0 5hr The presentation of the record state is the same as above Click a 0 5hr segment of a day directly to enter the record playback of this segment C Playback based on file list Enter the year month and date to be searched in the Time Input box and click Search to view the record state of this date Click a certain day on the Month bar and then the FILE LIST The FILE LIST screen will pop up as shown below Channel selection There are 5 options 1 2 3 4 and all 9 options for 8 channel DVR After selection and confirmation which channel file is displayed can be modified in the following list Record type There are 3 options all normal and alarm After selection and confirmation the searched message will be displayed automatically as a list as shown below
12. s local network and remote access network Low network speeds can cause failed login After logging into the remote access the message shows user is configuring Please ensure that the user has exited out of all the relevant menus within the DVR There is a delay and drag mark on screen within the real time monitoring client interface Due to the nature of remote connections this is quite common If the delay is more than 10 seconds please re check the DVR s network settings Serious image delay during cell phone monitoring Due to the nature of remote connections and varying signal strengths this is quite common Test the mobile phone access within a 3G or WiFi environment to ensure that it is not a weak signal issue Please re check the DVR s network settings to ensure the speed is not compromised IQCCTV IQR4D 4 Camera DVR Appendix 2 Hard Drive Space Calculation Table This DVR hard drive space in relation to the resolution is detailed in the table below units are in Megabytes MB per Channel per Hour Half D1 350 Please Note These are only estimated figures and are only to be used as reference Data from different environments signal sources and bit rate will be different and affect the storage Capacity Appendix 3 Connection Guide Cameras e Mouse USB Backup S Eau r To CH6 CH3 VIDEO OUT ORRE 00010 lbt Al T AINS AIN7 AING AIN4 AIN3 AN2 AN1 Haunio our e eee i
13. system time date format time format time zone and summer time can be set up in this screen 3 6 3 User password SECURITY DEVICE ID 000000 PASSWORD ENABLE jy USER PASSWORD k RE ENTER Pbk ADMIN PASSWORD iek RE ENTER ik CLEAR IE PASSWORD APPLY EXIT A DEVICE ID Enter digits directly to set up the DVR number B PASSWORD Press Enter to select ENABLE or DISABLE the user password If this option is enabled the user has to enter his her password to log in successfully if it is disabled the main menu of the system can be logged in directly C USER PASSWORD This option is operated with keys or the mouse Enter digits directly to set the user password D ADMIN PASSWORD This option is operated with keys or the mouse Enter digits directly to set the administrator password Please Note This unit has no initial password When you re setting up passwords it is recommended that the two passwords are set up together If any set password is forgotten please contact your dealer or the technical department of the manufacturer Normal Users only have access to the following locking channel changeover video search log search backup PTZ control mute manual recording and stopping recording functions IQCCTV IQR4D 4 Camera DVR 3 6 4 CAMERAS Move the cursor to the CAMERAS option the icon is surrounded by a yellow frame to indicate selection and press Enter to enter the setup s
14. that when you move the cursor to any option the prompting message of this option will be displayed automatically in the lower part of the screen 3 2 Recording mode Enter the Recording Mode screen from Main Menw gt Record as shown below e CHANNEL CH1 ON MJ CH20N N CHSON N CH4ON CH5 ON M CHON M cH70N N cHson N REC MODE When powered uphd FILE LENGTH 6OMINMd AUDIO ENABLE DISABLE Video Channel CH1 M CIF DEFAULT APPLY EXIT A CHANNEL use to select which channels are enabled recording B RESOLUTION available in D1 704 576 HD1 704 288 and CIF 352 288 C QUALITY available in the 3 levels of high normal and low corresponding to the 3 data stream standards of high normal and low bit rates D FRAME RATE adjust frame rate E AUDIO switching on or off audio recording IQCCTV IQR4D 4 Camera DVR F REC MODE available in the two modes of startup recording and timing recording When powered up Starts recording when as soon as the unit is powered It works only if the corresponding channel is enabled in the Channel option By Time Records as per a user defined schedule When timing recording is selected the Record Time Configuration button will appear on the right Move the cursor here and press Enter to access the Record Time Configuration screen as shown below SCHEDULE CHANNEL ALL 00 06 12 SUN MON TUE WED THU FRI SAT ALARM E GENERAL C
15. to enter the setup screen of this option as shown below ALARM SETUP 1 0 CHANNEL CH1 CH2 CH3 CH4 1 0 ALARM NO ds Oda aa OFF HDD LOSS oF HDD SPACE OFFA VIDEO LOSS aa ALARM MANAGE OUTPUT 10SM BUZZER 10SM POST REC IMINGd EMAIL SETUP NEXT PAGE DEFAULT APPLY EXIT A I O CHANNEL ALARM Each channel corresponds to an I O state alarm when the alarm input of a channel is valid the alarm record of the corresponding channel will be started NO Normally on NC Normally close OFF shutdown alarm of this channel B Note When an alarm is produced a red letter I will be displayed above the corresponding channel C HDD LOSS On When the system cannot identify the hard drive an alarm will be generated and a red mark H will be displayed at the bottom left corner of Channel 1 in the lower part of the Video Preview screen D HDD SPACE On When the remaining space of the hard drive is less than 500M the lower part of the Video Preview screen will display The space of the hard drive is not enough Please change the drive after shutdown E VIDEO LOSS On When the video of a certain channel is lost this channel will display in the lower part of the Video Preview screen Video Loss F ALARM MANAGE OUTPUT the time of the DVR outputting the alarm signal when an alarm is generated with the options of Osec 10sec 20sec 40sec and 60sec G BUZZER the time of buzzer ringing when an alarm is g
16. 37 02p00 1000000 264 cn00000000000002 10080 2 10 2737 102737 02p00 2000000 264 My Recent E ch00000000000003 100802 102737 102737 02p003000000 264 Documents Desktop My Documents ae My Computer My Network File name ch00000000000002 100802 102737 102737 0 Open Places ba Cancel Files of type 264 Files 264 3 Then click PLAY option as shown in the following image 4 Playback Version 2 3 0 4 File Setting View Bae Help le lext Hour All Video apture Picture A a A sd Mute IQCCTV IQR4D 4 Camera DVR After clicking PLAY option to enter the following interface as shown in the following image Playback Version 2 3 0 4 File Setting View Play Help D _ 0270872010 10 11 12 a ute owe ete ue eeu eu eee eeu jeu owen 10 29 57 02 08 2010 X1 4 mo lt lt gt gt p g amp lt BR ST Function Definition Function Definition Icon Icon Recording Schedule All video UL W Pause stop aa w secorra oraraa fleck oO e lt o gt sowmomarr BI ileDeston eeror an Fomaansinion i owe SiC Please Note 7 Double click the image to enlarge the image 7 When converting the AVI format you should click ST button Then click AVI to select the time periods IQCCTV IQR4D 4 Camera DVR Audio Setup Click SETTING gt AUDIO CHANNEL SETUP gt Normal video Bar as shown below
17. A sven C eT um B Router Internet Sound pick up Sound Monitor n 2h 8 Notebook User User Mobile user
18. ABLE N HDD FORMAT USB FORMAT SELECT HDD TO FORMAT DEFAULT APPLY EXIT A STATUS After the hard drive is connected the system will detect if the hard drive is correct automatically If the hard drive needs formatting Unformatted will be displayed in the hard drive state when you can click HDD Format to format the hard drive If the system detects any available hard drive the hard drive state will be ONLINE B ALL FREE referring to the total storage capacity and current remaining storage Capacity of the hard drive C TIME LEFT referring to the time remaining for recording based on the currently set picture resolution and quality D FORMAT Click the check box a Vv will appear in this box indicating that this HDD has been selected E OVERWRITE ENABLE The hard drive will overwrite the earliest record when its memory is full DISABLE Recording will stop when the memory of the hard drive is full F HDD FORMAT If the hard drive is used for the first time it is often necessary to format the hard drive Click the Format HDD button and then click Enter for formatting in the pop up prompt message dialog box otherwise click Cancel After clicking Format HDD the system will prompt You will lose all data by formatting the hard drive Will you continue Then press Enter and the system will prompt Formatting and then Formatting Successfully The s
19. APPLY button to save the settings Exit to live screen and select START CRUISE Oe ok ee eS Please Note To view a preset cruise enter the relevant number and select JUMP Similarly to delete a preset cruise enter the relevant number and select CLEAR 2 4 6 MUTE Mutes the audio from the DVR 2 4 7 Manual recording stop recording When the DVR is set to record immediately upon the booting of the DVR the manual stop recording button is not functional However when the DVR is programmed as timing record please see Chapter 3 and the DVR is not currently within its scheduled recording period the manual stop recording button is functional 2 4 9 ZOOM In the single channel full screen mode a user can zoom by drawing out an area on the screen IQCCTV IQR4D 4 Camera DVR using the mouse and thus zooming into that corresponding area 2 4 10 PIP Picture in Picture In the single channel full screen mode you can see floating images of other channels IQCCTV IQR4D 4 Camera DVR Chapter 3 Advanced settings 3 1 Main menu The main menu has the PLAYBACK RECORD HDD BASIC ADVANCED and Exit options as shown below i PLAYBACK RECORD 6 SETUP ADVANCED Please Note The setup of all the submenus below will not be effective until Enter is pressed The setup of this menu will be invalid if you exit directly A significant characteristic of this DVR is
20. LANGUAGE isc Please Note If the DVR host is in LAN but you have chosen the WAN option the effect of the preview image will be non real time 4 4 Real time preview After logging in the client end successfully the user can enter the real time preview screen as shown below The Playback Controls 2 Image refresh a Image Capture Remote recording see System Setup for the saving directory OOO Dividing the screen into 1 4 9 and 16 parts respectively isp controlling the upward downward leftward and rightward motion of the PTZ remotely and also the zooming focusing aperture and preset points of the lens IQCCTV IQR4D 4 Camera DVR Ov pra PLAY CONTROL Oe HAED E ne tp dvetest01 3322 or g 7604 a 03 01 2011 10 47 54 gt PTZ CONTROL 0370172011 10 47 54 s Not ZooM R Focus amp gi AE ns amp as 8 fr 4 5 Record playback Click PLAYBACK to enter the Record Playback screen as shown below 0570472011 04 00 25 Sun Mon Tue Wed Thu i aE r SONY i 2 25 26 z 29 i is i9 J 1 i a _ H 264 AVI First select the date of the record to be played and the channel and record types and then click Search The eligible record files will appear in the file list with the bold numbers denoting dates with record data as shown in the figure above Select the file to be played back and double
21. NO RECORD FROMSUN amp TO ALL amp copy DEFAULT SAVE EXIT Channel You may choose either All or individual channels o Time configuration First select from the 3 modes Alarm Recording General Recording and No Recording Select the desired recording schedule by selecting clicking the on screen boxes each box represents 1hr Each box can be configured into different recording modes by marking them into different colors Red Alarm Recording green General Recording and Black represents alarm recording general recording or no recording within each hour respectively G FILE LENGTH Left click or press Enter to select the File length with the 4 options of 15min 30min 45min and 60min 3 3 Video search Enter the Video Search screen from Main Menu gt Video Search as shown below This unit supports 3 video search modes A Timing playback Time input First select the corresponding channel and then adjust the date and time to be searched Left click or press Enter and the direction keys or enter digits directly for year month date hour and minute adjustment and then click Playback to play back the recording of this period of time for 4 channel DVRs all 4 channels can be played back simultaneously B Playback based on Recording Mode Enter the year month and date to be searched in the Time Input box and click Search to view the record state of this date as shown below
22. SE PTZ MUTE MANUAL REC STOP REC PIP MODE 2 4 1 Main menu Click Main Menw to enter the main menu interface please see 3 1 2 4 2 Lock When the password function is on please see 2 3 a right click in the monitoring interface and selecting the Lock option in the pop up menu allows the system interface to be locked A password is required to log back into the unit 2 4 3 Channel switching 4 channel DVRs can choose to switch to a 4 channel view or 1 channel view 2 4 4 Video search Please see Chapter 3 2 4 5 Start Sequence Start video channel automatic switching function Right click to exit 2 4 6 Start Cruise PTZ preset start cruising capabilities Right click again to opt out cruise Please Note This feature can only be activated after setting up the PTZ control parameters and preset points IQCCTV IQR4D 4 Camera DVR 2 4 7 PTZ Control Click right button in the main interface and select PTZ control gt 30 FAST zoom yi Focus Like SETTING EXIT PTZ speed fast or slow Zoom Focus and Iris options are controllable from this interface CH1 M Cy CRUISE POINT 0 CURRENT POINT 01 PTZ PAUSE TIME 03 JUMP SET POINT CLEAR APPLY Bae Cruise setting 1 Select the PTZ channel Set the pause time s Adjust the arrow keys to the position which needs to be monitored Press SETTING POINT Repeat steps 2 4 to set the second location Select the
23. The menu path to commence formatting Main Menu gt HDD gt HDD Format The unit will restart upon the successful completion of the formatting 2 3 System login The default user login code is 000000 without any password to log into the unit s main menu directly For better security the administrator can enter the system Basic Settings User Password to change the code and password of the unit Users can set ordinary user or administrator passwords The administrator has all the operating privileges whilst ordinary users only have limited privileges they can only monitor and video search playback After password is set the system will display user login interface as follows DEVICE ID 000000 PASSWORD IQCCTV IQR4D 4 Camera DVR Please Note Itis acceptable to leave the DEVICE ID identification number of the DVR as 000000 which is displayed on right side in corresponding input box as detailed in the image above However we recommend setting up a password when the remote controller is in an environment with other DVR s nearby This is to prevent the remote controller disturbing other DVRs 2 4 Shortcut menu After the system has started up a right click will bring up a pop up menu that allows an easy access to key menu items Main Menu Keylock Channel Switch Video Search PTZ options and video recording search MAIN MENU KEYLOCK CHN SWITCH VIDEO SEARCH START SEQUENCE START CRUI
24. a and a transparent block indicates motion detection is not activated as shown below m Bi Remote controller operation Use Ey display mode to select full screen or blank Mouse operation Left click the mouse and drag the motion box to set the detection area Motion detection setup procedures 1 Turn On the corresponding channel in the Channel Switch option 2 Set the sensitivity level as necessary usually set at 3 or 4 3 Set the motion area of the corresponding channel in the Area Setup option 4 In the Recording Mode screen set the corresponding channel to On in the Channel option 5 In the Recording Mode screen select Timing Recording Also click Record Time Configuration to enter the Record Time Configuration screen and set the corresponding time to alarm recording see timing recording in Recording Mode for the setup method After the setup has been done and motion detection triggered a red letter M will appear in the screen of this channel See Alarm processes in Section 3 6 1 for alarm processing IQCCTV IQR4D 4 Camera DVR 3 7 4 Mobile phone monitoring The mobile phone monitoring function allows users to access the DVR from their smartphones and is compatible with Android Blackberry iPhone Nokia Symbian and Windows Mobile The procedure is as follows Enter the following screen from Main Menw gt Advanced Functions
25. alled to ensure the proper connectivity with other devices 7 Ensure a suitable and compatible hard drives are used in the DVR IQCCTV IQR4D 4 Camera DVR Chapter TOVErVICW ic vissccassitscctsesccecsscstasitesteaciaiaitaactacsectasaestesatersantanenatanctawsucdeaasetees 5 LLINTOdUCO Mierne a E 5 1 2 Packaging and accessories cseccccssecccceseccccenscccaeeecesauececseueeesseueeessaeeessaases 5 Lo Main TOATUN CS saes E E E 5 LA Technical Specification Si oniranran a a a a 6 1 5 Product appearance and interface definition essssssesssersssressrressrrrsserrsserens 7 LOREMOrE cConNtTroNeT ereraa A E RA 8 EF MOUSE roris ana aera a E O AEO 9 Chapter 2 Quick INStAll Atl OM caian viva vouauaiavesaveaisesswoes 9 ZA SMA LION saps taesb amen orgenetaas tauseraimabteaeshacacaaisa R 10 ZZ BOON sieved ren A inti indedeuuaton E a 10 DS SVStem IOE a a eeu 10 ZA SNOCUTMEN U rane E AET E N 11 Chapter 3 Advanced settings sesessssesececessesecececscsesesececscsesecececscsesesecececsesececeee 14 SLM MENU sasea nn E A a a EN stares 14 32 RECOLGING WO Oe noraen aE a a eens eee emscenn cess 14 eo VICE OPS CGI Cene aaa a nieoltdataantuedttetebaait auceer sels oeadie epeearstenney 15 BA BACKUP ies dey antu conc duiwacscdeticassSeabsdeeetnaancdueedesaivenensties badd eo EN 17 3 5 Hard drive MaNageEMe Nt ccccssseccccseeccceesccccensceseuececseuecesseuecesseeesseaeeess 18 DB BASIC SOU cers svaninaatexicwetts A S 19 SLANIC eae cea tai
26. creen of this option as shown below NAME POSITION COLOR PREVIEW CH1 CH1 TOPLEFT SETUP oN_M TOPLEFT SETUP ON TOPLEFT setup ON ffoPLEFT M setup ON amp PREVIEW TIME ON fy RECORD Time ON CHANNEL SEQ DEFAULT APPLY I A NAME Move the cursor to the input box of this option and press Enter or left click to enter a camera screen name Numerical and English input methods are supported B POSITION Move the cursor to this option and press Enter or left click to change over between the position of the name on the screen there are 5 setup options top left bottom left top right bottom right and off C COLOR Move the cursor to Setup of the corresponding channel and press Enter or left click to enter the color setup screen as shown below COLOR SETUP CHROMATICITY 31 BRIGHTNESS 31 CONTRAST 31 SATURATION 31 DEFAULT APPLY EXIT Press Enter or drag the cursor directly to set the picture color including the 4 options of chromaticity brightness contrast and saturation Press Enter to exit and save the settings Preview A On The picture of this channel can be seen in the Video Preview screen B Off The Video Preview screen of this channel has been shielded but there is no effect on the recording of this channel C Preview time On The system date and time are displayed right above the Video Preview screen D Record Time On A clock can be di
27. ct IP Address your IP address Assign to Group No Group Configure Groups Enable Wildcard pius Enhanced Feature Filling in the Hostname Information 1 Fill in the Hostname box with a name of your choosing It can be anything you like If you choose a name that s already in use an error will be generated and you can then try a different hostname Since hostnames are unique per domain you can try using the same hostname and just select a different domain from the dropdown box below to see if that combination is available 2 Select an available domain from the dropdown box Note that certain domains are reserved for No IP Enhanced customers only 3 Choose the Host Type The default choice DNS Host A is usually the correct one Do not choose any of the other host types unless you re trying to solve a particular problem that a DNS A record won t accommodate If your ISP blocks Port 80 for example and you re trying to run a webserver or other service on port 80 then you can choose Port 80 Redirect at that point you ll be asked to specify the port to use for the redirection If you re not running a webserver then do not choose this option as it will likely prevent you from connecting properly 4 Inthe field marked IP Address you should already see your current IP address If you wish to set the IP address of the host to be somewhere other than your current location you can enter that address now 5 When you have fill
28. e as detailed below USER LOGIN IP ADDRESS 192 168 1 197 v MEDIA PORT 9999 PASSWORD a WETWORK LOGIN RESET IP ADDRESS Enter IP address or Domain Name MEDIA PORT Enter the port number the default is 9000 PASSWORD Enter IE password NETWORK Select relevant option LAN is the local area network INTERNET is the TO p gt wide area network Please Note After the successful login the interface is the same as that of IE Please refer to the instruction in Chapter 4 IQCCTV IQR4D 4 Camera DVR 5 2 Video Player Open the PLAYER installation program PlaybackSetup exe in the CD Drive After the successful installation double click the program icon Playback software on the desktop 15 Playback Version 2 3 0 4 Click File F as shown in the following image select open the local files F ee PlayDack Version 2 3 0 4 Setting View Play Help Open Local Disk Open Local Dir Open Remote Device P ee Miiltals Piel Upen Mulupie DISK When opening the root of the record file please select the format as 264 as shown below 4 Playback Version 2 3 0 4 gs 3 My Network File name Places Files of type IQCCTV IQR4D 4 Camera DVR There will be 264 files in the file list select one of the files to be played Click OPEN as shown in the following image Look in O Backup e Ea gt E ch0000000000000 1 100802 102637 1026
29. ed in the information for your new hostname simply click the Create Host button at the bottom of the page to save it Step 5 Making your host dynamic Now that you have added a host or domain into your account we have to deal with the dynamic IP address problem If your ISP assigns you a static IP address you can skip to step 6 If you have a dynamic IP address you ll need to install No IP s Dynamic Update Client DUC This is free software available from the downloads section of the site After installing the DUC be sure to configure it with the Email address and password that you use to login to this site As long as the No IP software is properly configured and running your hostname will always point to the dynamic IP address at your location no matter when it changes IQCCTV IQR4D 4 Camera DVR Step 6 Configure your router for Port Forwarding Setting up Port Forwarding is covered in the next section 3 9 Step 7 Run your services With the above configuration in place and if you ve gotten a successful result from the Can You See Me website you can now run your services and address your machine using the host or domain you created 3 9 Port forwarding If you use a router to connect to the internet and or have a firewall in place on your computer you will need to make sure that it is configured to direct the appropriate traffic from the internet into the destination machine on your network Routers have a feature called
30. en and return to the previous 3 4 Backup Enter the File List see 3 3 Video Search screen for the backup operation The recorded file may be backed up by a USB storage device Before the record file is backed up the user must insert the peripheral storage device into the USB2 0 slot of this unit This product supports the plug and play operation of USB devices Move the cursor up and down in the Detailed File List screen to select a certain record file After Enter is pressed in the Backup check box a V will appear in this box indicating that this recorded file has been selected Move the cursor to the option box on the right and click Backup and the screen will display the backup progress of the file as shown below FILE LIST TYPE ALL i FIRST CH TIME SIZE TYPE NEXT 5 14 to E G LAST 4 14 6 14 counte FILES 7 14 RECORDING DON T PUT OUT USB DISK 8 14 ALL Notes When the available space of the backup device is less than the capacity of the recorded file the system will prompt the user with Not Enough Space After the recorded file has been backed up unplug the backup device directly See Chapter 4 DVR Network for network backup IQCCTV IQR4D 4 Camera DVR 3 5 Hard drive management Enter the Hard drive Management screen from Main Menu gt HDD as shown below HDD MANAGEMENT STATUS ONLINE ALL FREE 250G 8G TIME LEFT 25 HOURS EN
31. enerated with the options of Osec 10sec 20sec 40sec and 60sec H Post Alarm Recording the time of record delay after the motion detection alarm with the options of 30sec 1min 2min and 5min I Email SETUP This unit supports motion detection and e mail alarm J Email setup Prerequisite The mainframe must be connected to the WAN See Chapter 4 DVR Network for the connection method K When motion detection is triggered the system will extract a picture at the time of triggering and send it to the corresponding mailbox IQCCTV IQR4D 4 Camera DVR EMAIL SETUP EMAIL ON SSL OFF ON SMTP PORT 00025 SMTP smtp 2 com SEND EMAIL abcd er com SEND PW Jaooo RECV EMAIL efgh k com DEFAULT APPLY EXIT A SSL a secure link transmission protocol who s Off or On state is determined by the mailbox server Off is usually chosen B SMTP PORT the mailing port of the mailbox server usually being 25 with the exception of a few mailboxes such as the mailing port of the GMAIL server whose port number is 465 C SMTP the server address of the mailbox used for example the SMTP server of the Yahoo mailbox is smtp mail yahoo com please check this address to your mailbox supplier D SEND EMAIL the mailbox address used to send mails E SEND PW the password of the mailbox used to send mails F RECV EMAIL the address used to receive the picture transmitted after the DVR motion detection alarm If
32. ipment by DVR s heat DVR will produce certain heat during its operation Therefore please place the DVR ina safe place with good ventilation to ensure excess heat does not affect the DVR How long can a 4 channel or 8 channel DVR record if 1000G hard drive is used Please refer to Appendix 2 hard drive space calculation Table DVR s remote controller does not work If the controller is pointing to the IR signal on the DVR s front panel but is still not working please check the batteries in the remote controller If it is still not working please check the status of the remote controller The manual recording and stop recording button on the front panel and shortcut menu does not work This function can only work when the DVR is not under a recording status This will only work when the DVR is setup as Timing Recording and is in a non recording period Is playback available while recording Is multi channel playback available Yes the DVR can support playback while recording 4 channel DVR can support 4 channels playback at the same time 8 channel DVR can only support single channel playback E mail alerting is not functioning Please follow the instructions carefully in particular whether there are any errors or unnecessary spaces in the email details Please check your mail server s functionality if SSL ordinary shutdown Can t find any recorded files when playing back Please check the hard drive is c
33. n and move the motion box to set the dynamic detection zone when setting up motion detection areas IQCCTV IQR4D 4 Camera DVR Chapter 2 Quick installation 2 1 HDD Installation Hard drive installation must be carried out by technicians to avoid damage to the equipment and hard drives The DVR must be powered off before you plug in a hard drive For best results please ensure that hard drives with SATA connections are used Installation procedures are as follows 1 Open the DVR 2 Connect the hard drive to the corresponding SATA data and power cables 3 Secure the hard drive by aligning the hard drive with the corresponding screw holes 4 Once the hard drive is secured replace the DVR cover Please Note A new hard drive must be formatted before it can record 2 2 Boot Connect the DC12V 3A power adapter to the power cord socket on the DVR s back panel Press the power button on the front panel and the POWER LED will indicate that the unit is switched on and the monitor will display a 4 channel monitoring image If a hard drive has not been formatted formatting information will be shown instead If the automatic recording function is chosen then the REC LED will also be visible on booting the DVR Please Note fhard drive is faulty or has not formatted correctly the red H logo will be shown in the video pre view picture The newly installed hard drive must not be used until it has been formatted
34. ng on the network environment of the DVR GATEWAY Setting the gateway depending on the network environment of the DVR If there is no router device in the network please allocate an IP address on the same network segment If there is a router device in the network you have to set the corresponding gateway DNS setting the IP address of the domain name server DNS varies from city to city you can refer to the domain name server configurations of the PC UPNP When the UPNP function is on router must have UPNP functionality then the DVR will map the port and IP into the router automatically lIQCCTV IQR4D 4 Camera DVR DDNS Setup Click DDNS Setup to enter the following screen oe te DDNS SETUP ON dyndns dvrtest99 dyndns com dvrtest99 DEFAULT APPLY EXIT DDNS with the two options of ON and OFF when a domain name resolution server is available please select DDNS ON SERVICE The user may select the desired DDNS server HOST NAME Enter the host name registered on the dynamic domain name server USER NAME Enter the user name registered on the dynamic domain name server PASSWORD Enter the password registered on the dynamic domain name server IQCCTV IQR4D 4 Camera DVR 3 8 Domain name application Step 1 Create account First open www noip com click the Create Account option as shown below and fill in the required fields on the new account form pport Company User L
35. ogin Step 2 Confirm your account Once you have submitted your account information into the new user form they will send a confirmation email to the address you provided You will need to check that account and look for the email from No IP com The email contains a link you must click in order to confirm your account Step 3 Login to your account Now that you have confirmed your account you can login to No IP com On the top of the No IP home page just below the No IP logo you will see an area to enter your email address and password Enter the information that you signed up with and click Login Step 4 Login to your account You should now be logged into the No IP com members section Here you can create a hostname that you will use to connect to your server A hostname is used instead of your IP address whenever you want to connect to a service at your location Hostnames take the form of hostname domain com so they re the same as names used in URLs to surf the web etc For example if you wanted to connect to your server using a web browser you would put http hostname domain com in the address bar In order to add a host to your account select the Add link from the Hosts Redirects menu This will bring up the Add a Host page IQCCTV IQR4D 4 Camera DVR Hostname Information Hostname myhost OID DIZ med Host Type DNS Host A O DNS Host Round Robin O DNS Alias CNAME O Port 80 Redirect O Web Redire
36. onnected properly and whether system time is adjusted set correctly Try it several times and test whether the hard drive is damaged if above still appears DVR does not control the PTZ after setup Ensure that the cables properly connected for both the PTZ camera and DVR Secondly ensure that the DVR and Camera have been set up with the correct details i e Camera ID Protocol and Baud Rate IQCCTV IQR4D 4 Camera DVR 12 13 14 15 16 17 18 Motion detection does not work Ensure the motion detection time and zones are setup correctly particularly the sensitivity settings Alarm does not work Ensure the alarm settings and connections are correctly setup and make sure that alarm signal inputs are correct DVR can only realize non real time access to LAN For an 8 channel DVR when accessed via LAN it will show real time screen only when the LAN option within the network environment is selected For 4 channel DVRs in addition to selecting the LAN option please also select the ordinary option under the details section within the recording mode setup Remote login interface is available but shows Login failed when login Ensure that you have entered the login details correctly If you have forgotten the password please enter User Password interface within the system and click Clear IE Password and login again Additionally please check settings on the DVR
37. ork access as shown below Fill in the PPPOE user name and password provided by the Internet service provider lIQCCTV IQR4D 4 Camera DVR NETWORK SETUP TYPE PPPOE MEDIA PORT 09000 WEB PORT 00080 PPPOE NAME PASSWORD DNS 202 096 128 166 DDNS SETTINGS DEFAULT APPLY EXIT When one ADSL line is connected to one DVR only you can select Internet connection within the PPPOE mode which will connect the DVR directly Then press Enter to select PPPOE in the connection mode to enter the PPPOE Setup screen After entering the broadband user name and password click Enter and the system will restart The DVR will establish a network connection in the PPPOE mode automatically After successful connection the IP address will be modified to the acquired dynamic WAN IP address automatically A MEDIA PORT the port number used in the private protocol communication between the DVR and the PC end usually being 9000 by default If this port of the PC is occupied by any other service please modify it to an unused port WEB PORT the http port usually being 80 by default If the administrator modifies the WEB port to any other port such as 88 you have to postfix the IP with the port number and enter http 192 168 1 19 88 in the address bar when accessing the DVR via Internet Explorer IP ADDRESS allocating an IP address depending on the network environment of the DVR SUBNET MASK filling in a subnet mask dependi
38. port forwarding port forwarding is a mechanism used to take Internet traffic destined for a particular port and then sending it to a computer on your local network To do so involves opening and forwarding traffic on the proper ports These ports are determined by the application in question some common ones include 21 for FTP servers 25 for SMTP mail 80 for web servers etc You will have to determine which ports you need to open based on the needs of your particular software There are many router manufacturers with numerous different user interfaced but the key points in the setting up Port Forwarding is the same The following procedure is based upon a Netgear MR814 Router Step 1 Logon to your router Open your web browser and type http 192 168 0 1 basicsetting htm in the address window http 192 168 0 1 is the default IP of Netgear routers if you ve changed this then use the appropriate address Enter username Password and password password these are the default Netgear MR814 values Note If you have changed the default username and password then use the values you have changed them to IQCCTV IQR4D 4 Camera DVR Step 2 In the menu on the left side of the page look for the Advanced menu and then click on Port Forwarding NETGEAR SMARTWIZARD cet hse iroless Rovior mode MANIA vo le Basic Settings Setup Wizard Basic Settings Does Your hvternet Comection Require A Login Wireless
39. re 1 of the web servers to use a different port 8080 for example Now you can open port 80 to the first computer and then open port 8080 to the other computer Remember that opening and forwarding ports on a router effectively exposes your internal network to the Internet You should only open the ports that are needed to get your applications to work and always make sure your computers have all the latest patches and security updates applied in order to minimize the possibility of someone compromising your network IQCCTV IQR4D 4 Camera DVR Chapter 4 DVR network 4 1 Functional characteristics The DVR supports LAN and WAN access as well as IP and domain name access 4 2 Installation and download of controls Automatic installation of plug ins unit First add the IP address of the DVR as a reliable site of the system For example if the IP address of the DVR is 192 168 1 100 within Internet Explorer IE option Internet Options gt Security Options images are based in Windows XP system as shown below This can be set in 9 steps Trusted sites Internet Properties General Security Privacy Content Connections Programs Advanced You can add and remove Web sites from this zone All Web sites i Tea Ga eee aN Pe te oe in this zone will use the zone s security settings Select a Web content zone to specify ity settings amp Intemet Local intranet Restricted
40. rface for mouse lIQCCTV IQR4D 4 Camera DVR 1 4 Technical Specifications Features Description _ S Multiplex operation Live recording network mobile phone surveillance simultaneously Recording backup Support USB flash drive mobile hard drive network backup Support 1 SATA HDD capacity to 2T Network transmission 4 Channels real time network transmission with CIF resolution PPO Ooo o ooo Support 1 RJ 45 10 100M via Ethernet support TCP IP SMTP DHCP DNS DDNS NTP etc Support max five users online Mobile phone surveillance Support Windows Symbian Nokia iPhone Blackberry Android 1 Working humidity 0 90 SIZE mm 274 W 214 D 45 H IQCCTV IQR4D 4 Camera DVR 1 5 Product appearance and interface definition 1 5 1 Front panel OQ OOO 630 S555 WEY 1 5 2 Back panel A Pudiooutput Connect the audio output 6 Network ComnecttheEthernet oS opar o reete Bea Grounding To eliminate electrostatic from body IQCCTV IQR4D 4 Camera DVR 1 6 Remote controller Spare keys Z Channel selection number keys E Single and multi split screen N MENU Quit shortcut menu Shortcut menu Direction buttons Exit Return Enter the main menu STARTREC Manual recording STOPREC Stop recording e pe oe le oc Frame movement F1 F2 Spare key IQCCTV IQR4D 4 Camera DVR 1 7 Mouse The DVR supports the use of a USB mouse to operate its menu structure
41. sites li k Web sites 6 Find Gee Dehek CLIC This zone contains Web sites that you Sites trust not to damage your computer or a data No sites are in this zone Secunty level for this zone Custom Custom settings 4 cancel the 6 To change the settings click Custom Level To use the recommended settings click Default Level Melick Custom Level Default Level Y ActiveX controls and plug ins 0 Automatic prompting for ActiveX controls Disable 9 a Cancel Enable E Binary and script behaviors Administrator approved Disable Enable C Download signed ActiveX controls Disable Prompt A Download unsigned ActiveX controls PN r e bl After setup enter the IP address in the IE address bar and complete the automatic installation of the plug in unit as prompted Please Note Enter the IP or Domain Name in the third step without the need to enter port number IQCCTV IQR4D 4 Camera DVR 4 3 IE login Log in the system after the plug in unit has been installed For example if the domain name of the DVR is dvrtest05 eicp net and its port is 80 enter the domain name in the IE address bar The user will be taken to a login in page as shown below enter the user name and the password select LAN or INTERNET depending on the network environment and click Login to access the client end or access the DVR end remotely USER LOGIN NETWORK INTERNET v
42. splayed in the playback of the current recorded file E Channel SEQ Setup channel sequence time IQCCTV IQR4D 4 Camera DVR 3 6 5 VIDEO AUDIO Move the cursor to the VIDEO AUDIO option the icon is surrounded by a yellow frame to indicate selection and press Enter to enter the setup screen of this option as shown below 1D AUD SETU Monitor resolution 1280x1024 CAMERA SYSTEM PAL VOLUME SETUP A MONITOR RESOLUTION Left click or press Enter to set the VGA output resolution with the 3 options of 1280 1024 1024 768 and 800 600 B CAMERA SYSTEM Left click or press Enter to change over between the two camera systems of PAL and NTSC C VOLUME SETUP Move the cursor to Volume Setup left click or press Enter to enter the Volume Setup screen and press Left Right or drag the cursor with the mouse directly to adjust the volume VOLUME Please Note The system will restart when the VGA resolution or the camera resolution is modified 3 7 Advanced Enter the following screen from Main Menw gt Advanced The advanced functions include the 7 options Alarm setup system information motion detection MD mobile phone monitoring system maintenance PTZ Setup and Network Setup IQCCTV IQR4D 4 Camera DVR 3 7 1 Alarm Move the cursor to the Alarm option the icon is surrounded by a yellow frame to indicate selection and press Enter
43. tatus Attached ee Step 4 L da leName Stan Pon EndPort Server iP Address EqitSenice Delate Serica Enter the IP address of the target machine on your network that the traffic gets forwarded to NETGEAR SMAR T WIZARD router manager Wiroless Rowlor modal MRS 14 ws Setup Wizard Port Forwarding Basic Settings Settings Service Maine Server IP Address 5 L_Aqd H EA isz liss o Wirelass es p SEM EE j lf SericeName Start Port EndPort Server IP Address Logs Block Sites Add Custom Service Block Services Schedule E mail Step 5 Click the Add button to save the rule IQCCTV IQR4D 4 Camera DVR NETGEAR 5 MA R TW l Z A R D router manager Wiroloss Routor modol MRATA 3 Setup Wizard fad Port Forwarding Service Name Server IP Address HTTP _ 492168 0 IE Ada Basic Settings Wireless Sotlings ME ae _ stant Port End Port Server IP Address 193 166 0 5 Block 5Sermwices Logs Block Sites Schedule Add Cusiom Service E mail Step 6 Check the finished rule for accuracy and then you are finished Please Note Because most routers use NAT Network Address Translation you can only open a specific port or ports to one computer at a time For example If you have 2 web servers on your network you cannot open port 80 to both computers You will need to configu
44. teuahabacqenn EE A EER 22 3e DOMIGIN MAING a POUCA O Neso E 30 3 9 Port forWwardiNE censorer iran E E E A S 32 Chapter 4 DVR networK s essesecesesesseseccsesessescceseseosesoceseseosesoceseseosesecesesesseseceseseoe 34 4 1 F nctional characteristics oenas waded AE 36 4 2 Installation and download of controls ssssesssssssseesssssssereresssssserrressssseeeee 36 A WENO CI irosen E EE E E TE needs ae 37 4 A R al tiMe previ eWoe E E AEAEE 37 4S Record Diday OAC arwi N S 38 4 6 Recording MOdE suiscscasoraccccenlssace riera E S E 39 IQCCTV IQR4D 4 Camera DVR AF VAN SCL naea beotanscoea bins Se gncsts aeons nase eo ee eee ee 39 A amp P UZSCOMEN Ol ccrtacte sats cncasesncdcon E E T R E E E 40 AO INGLWONIK SCLUD arscerssccsos vere ceonrecensdautacets usvnes etwas eaci erases 40 A LO SVS tO CS CLUDD 22 sccntd dutecateeadssinnetnavancelisasmnrsdachacsanadinntssanbaceea seat deaeantena tener tenies 41 AAT HOSE INO neen a r N Ea 41 Chapter 5 Client software amp Player sccsscssccsccssccsccecccsccscceccesccsccescesccnccesees 42 SLEE Sonwa E ena E AEE EAE 42 B22 NIOCOPIAVET ork E EE 43 Appendix 1 Frequently Asked Questions ccccssccccsececceeececeeesccssecessenseesaes 47 Appendix 2 Hard Drive Space Calculation Table ccsccccccsssescecceeseseeeeaeeeees 49 Appendix 3 DVR Connections cccseccccsseccccesscccceesecsaececeeuscesaueecessuseesseneeesaes 49 IQCCTV IQR4D 4 Camera DVR Chapter 1
45. the alarm frequency of the system is high the number of pictures sent will also be larger Please pay attention to the space of your mailbox regularly as the mailbox may be affected due to an excess number of pictures sent 3 7 2 System info Enter the System Info screen from Main Menu gt Advanced Functions as shown below SOFT VERSION V20101101 UI VERSION V1 2 1_CE MAC ADDRESS 00 1 1 30 4D S5E 6F This screen shows the software version number DVR unit version number MAC address and serial number in this screen IQCCTV IQR4D 4 Camera DVR 3 7 3 Motion detection Enter the Motion Detection screen from Main Menw gt Advanced as shown below MOTION DETECT MD CHANNEL CH1 CH2 CH3 CH4 STATUS OFF M OFF e OFF e OFF SENSITIVITY 1 M 2 M i 2 MD AREA SETUP SETUP SETUP SETUP NEXT PAGE DEFAULT APPLY EXIT A MD Channel and STATUS Each channel has a corresponding switch Press Enter to select motion detection On or Off B SENSITIVITY Each channel has a corresponding sensitivity setting with the 4 levels of 1 2 3 and 4 In which 4 is the most sensitive Press Enter for changeover C MD AREA Each channel has a corresponding motion detection area setting Move the cursor to Setup of the corresponding channel and press Enter to enter the motion area setup screen of this channel On this screen a red block indicates motion detection is activated for this are
46. ystem will restart automatically G USB FORMAT formatting the USB drive H DEFAULT The Default button is used to restore the factory default values Please Note In order to connect the hard drive data on the DVR securely we recommend that the hard drive must be formatted before the first time of recording IQCCTV IQR4D 4 Camera DVR 3 6 Basic setup Enter the Basic Setup screen from Main Menu gt Basic as shown below a Fen xte TY LANGUAGE amp Ty CAMERAS The Basic Setup screen includes the 6 options System Language Date Time Setup Password Camera Setup Video Audio Setup and Exit 3 6 1 System language Move the cursor to the LANGUAGE option the icon is enlarged and highlighted to indicate selection and press Enter to enter the setup screen of this option as shown below SYSTEM LANGUAGE SYSTEM LANGUAGE ENGLISH APPLY EXIT The system offers optional multiple languages After choosing the language click Apply button to save and it will go into effect after system restart 3 6 2 Time setup Move the cursor to the DATE TIME option the icon is surrounded by a yellow frame to indicate selection and press Enter to enter the setup screen of this option as shown below IQCCTV IQR4D 4 Camera DVR TIME SETUP DATE 11 23 2008 DATE FORMAT MM DD YY TIME 16 40 04 TIME FORMAT 24HOURS LOCAL TIME ZONE GMT 08 00 DEFAULT APPLY EXIT The
Download Pdf Manuals
Related Search