RSP844 User Manual
Contents
1. illuminate to indicate chase Features 16 built in patterns that operate in manual sound activation Adjust the timer speed dials for each band to adjust chases speed from 1 13 minutes For strobe operation connect EST 10Mono cable sold separately from Multi Function Switch Panel to strobe Choose options of on and speed control located on the front of the Multi Function Switch Panel For fog machine operation connect EXT 2 Fogger Extension Cable sold separately from Multi Function Switch Panel to fog machine When fog machine is warmed up depress fog button on Multi Function Switch Panel to disperse fog Installation Mounting The Multi Function Switch Panel may be used either seated on a level surface or mounted into an appropriate 19 2U space rack cabinet For reasons of safety it is best to secure the unit into a rack or suitable mounting so that the extension cables cannot be pulled out of the panel The SR 8 Relay Pack may be used either mounted on a level surface or to a lighting stand truss It is recommended that for safety purposes if hanging the unit to use a suitable clamp and safety cable Replacing Fuses If the unit does not function at all when plugged in and the circuit breaker reset on the Relay Pack has been reset then it is highly likely that the fuse is blown Unplug the unit before attempting to replace the fuse To replace the fuse unscrew the fuse2. RSP844 User Manual 1 Technical Specifications Model Power 120V 50 60Hz 230V 50 60Hz Load capacity 15A Fuse 110V 3A 230V 0 5A Weight 10 15lbs 4 6kg 2 Operation Manual Operation Before plugging unit in the EXCB 25 extension cable must be linked from the line out on the Multi Function Switch Panel to the line in on the SR 8 Relay Pack To connect gently push the 9 pin connector on the extension cable into the appropriate line and screw down snugly the two screws on either side For longer runs extension cables may be linked together Turn all channel switches and master switch to off position on Multi Function Switch Panel Plug switch panel and relay pack in Plug items into the appropriate socket on the relay pack Turn the master switch to the on position The switch should illuminate Switch the desired channel switches to the on position Channel switch will illuminate and the item plugged into the socket for that channel will begin to operate With channel switch in the off position depress and release flash buttons for quick on and off Note item will remain operational for as long as the flash button is depressed Chasing Timer Mode Operation Set up as described above in manual Operation Section Switch desired channel switches to the chase position In timer mode each bank of four channels chases separately within each bank Indicator lights will
3. holder on the back of the Switch Panel to reveal the fuse It is important that the replacement fuse is of the correct rating 3amp Failure to use the correct fuse could damage the unit beyond economic repair Place the new fuse in the fuseholder and screw the cap back snugly
Download Pdf Manuals
Related Search