FP-2703W User`s Manual
Contents
1. included Check Applicable Models printed on the bag of the stoppers to use the appropriate type depending on the monitor Before installation the stoppers please remove dust and stains from the cabinet of the monitor Follow these steps to install the stoppers w E Eii 1 Remove the protection paper from the stoppers 2 Install the stoppers on the cabinet of the monitor Removing Release the stoppers from the cabinet Put the lever on the tabs of panel protector and move it toward the cabinet to remove Cleaning Please be sure to keep the panel protector immobilized while cleaning it Otherwise it may scratch the surface of the LCD panel To hold the panel protector by hand use a soft cloth to avoid dust or finger prints Chemicals such as alcohol and antiseptic solution may cause gloss variation tarnishing and fading of the cabinet or panel and also quality deterioration of the image Never use any solvents or chemicals such as thinner benzene wax alcohol and abrasive cleaner which may damage the cabinet or panel If necessary the stains on the cabinet and panel surface can be removed by moistening part of a soft cloth with water a e It is recommended to use EIZO cleaning kit ScreenCleaner option to clean the panel Specification Anti glare side anti glare hard coating Glossy side hard coating ZEOT Reflectivity Less than 6 8 More than 90 Dimension Weight 601 0 mm W x 340 1 mm H x2. 1 0 mm D approx 245 g Lever for Panel Protector x 1 Stoppers 2 types x 6 User s Manual Copyright 2012 EIZO NANAO CORPORATION All rights reserved OONOL768A1 U M FP 2703W AL
3. User s Manual Geizo FP 2703W Panel Protector for EIZO 68 cm 27 0 inch class LCD Monitors Please be careful not to scratch the LCD panel or the cabinet with the panel protector during installation Also please do not remove the panel protector often It may scratch or result in damage to the LCD panel The panel protector has an anti glare treatment side and a glossy side Use preferable side When using LCD monitor with optional panel protector it is preferable to avoid using downwards In this condition the panel protector might become bend or slip out from the monitor Attaching a panel protector to the monitor with an Integrated Front Sensor slide type disables an Integrated Front Sensor slide type The settings for the monitor and RadiCS RadiCS LE need to be changed Refer to each User s Manual for details Installation Before installation please remove dust and stains from the LCD panel 1 Set the panel protector into the grooves of the panel frame the lower first 1 then the upper 2 2 With the enclosed tool Lever set the tabs of the panel protector into the side grooves 6 tabs Put the lever on the tabs of the panel protector and move it toward the LCD panel to install Position the protector into the LCD panel tightly without leaving an opening For the recommendation please use the stoppers to prevent the panel protector from bending or slipping out from the monitor 2 types of stoppers are
Download Pdf Manuals
Related Search