USER`S MANUAL CONTENTS Installation To
Contents
1. 50703 e AM FM DVD Receiver with 7 TFT Display SOUND STORM A T O I E S 3451 LUNAR COURT OXNARD CA 93030 USER S MANUAL CONTENTS Installation 2 To support the unit 2 Detaching and attaching the front panel 2 Moving the screen forward 3 Cleaning the connector 3 Wire Connection 3 Location of parts and controls Main unit and Remote control 5 General operations 6 Listening to radio 7 Using the RDS function 8 Operations common for audio video 8 Listening to MP3 WMA 9 Playing DVD video CD MP4 10 Customizing audio video settings 12 Setting up the DVD player 13 Troubleshooting 14 Specifications 15 INSTALLATION PRECAUTIONS Choose the mounting location carefully so that the unit will not interfere with the normal driving functions of the driver a Avoid installing the unit where it would be subject to high temperatures such as from direct sunlight or hot air from the heater or where it would be subject to dust dirt or excessive vibration Use only the supplied mounting hardware for a safe and secure installation sure to remove the front panel before installing the unit NOTE Inclination angle for car radio installation must not exceed 30 otherwise the front panel will not open Release screw and bracket RELEASE CASE DASH BOARD HEX NUT LOCK WASHER PLAIN WASHER CAR BODY REAR SUPPORT STRAP TAPPING SCREW M5 X 15 HEX BOLT Detaching and attachin2. By pressing shortly the radio plays each preset station for 5 seconds Auto Seek AS By pressing longer than 1 sec auto seek is activated The 6 strongest stations are preset and stored in the corresponding preset number When Auto Seek operation is finished the radio executes the preset scan Storing and Recalling Frequencies Currently Tuned Station If you press any of the NUMBER 1 6 you can easily store up to six broadcast frequencies for later recall with the touch of a button 1 Choose a desired BAND 2 When you find a frequency that you want to store in memory press a NUMBER 1 6 and hold until the preset number shows and lit in the display 3 The selected radio station frequency has been stored in memory The next time you press the same NUMBER 1 6 87 80 89 80 91 80 the radio station frequency is recalled from memory Note Up to 18FM 12AM preset stations be stored in the memory 97 10 105 70 Preset Memory Station 1 6 USING THE RDS FUNCTION What is RDS The RDS Radio Data System is a digital information system developed by the EBU European Broadcast Union Piggy backed on normal FM broadcasts RDS offers a variety of information services and automatic retuning functions for RDS compatible car stereos In 1988 RDS became available in the United Kingdom France West Germany Ireland and Sweden Note Make sure that you first select the correct Region setting for RDS to work region setting
3. and minus poles pointing in the proper direction When use for the first time pull out the film protruding the tray CAUTIONS Remove battery if the remote control is not used for a month or longer Do not recharge disassemble heat or dispose the battery on fire Do not store battery with metallic materials In the event of battery leakage wipe the remote control completely clean and install a new battery When disposing of used batteries please comply with government regulations or environmental public institution s rule that apply in your country area Always check carefully that you are loading the battery with plus and minus poles facing the proper directions Using the remote control Point the remote control in the direction of the front panel to operate IMPORTANT Do not store the remote control in high temperatures or direct sunlight Do not let the remote control fall onto the floor where it may become jammed under the brake or accelerator pedal GENERAL OPERATIONS Turning the unit ON OFF 1 Press 5 button to turn on unit To turn off press and hold the button again Calibrate Touch Screen To start operation Calibrate first the touch screen monitor On the main menu touch SETTING gt Calibrate Touch Screen will appear then follow the instruction on the screen Main Menu This is root of the screen hierarchy and you can simply access all features by tapping on the touch screen b
4. should be Europe To make the region setting go to main menu touch SETTING then touch Region Setting to the select the desired region AF Function Alternative Frequencies Press AF to toggle alternative frequency On Off When AF is ON the radio checks the signal strength of the AF all the time when it becomes too weak the unit search for a better signal within AF lists then switch to that frequency TA Function Traffic Announcement When pressed short it is activated as TA mode on or off When TA mode is on and traffic announcement is transmitted When the unit is it CD MP3 mode it will switch to radio mode temporarily Ifthe volume level was under the threshold point it will be raised to the threshold point PTY Function Program Type 1 Press and hold PTY button to turn ON Program type 2 Rotate VOL knob to select program type 3 Once desired program shows simply press PTY button once more and unit start searching for available stations Note Program type will flash when searching for stations OPERATIONS COMMON FOR AUDIO VIDEO 10 Tracks Down 10 tracks Up 1 Press and hold 10 button to jump 10 tracks backward starting from currently played track 2 Press and hold 10 button to jump 10 tracks forward starting from currently played track Specifying particular track During playback all track file names under a folder will be displayed on the screen categorized by Music Photo
5. Video Simply tap the screen on which category you want to play and rotate the volume knob to select file then push volume knob to start playback Tips To select track 3 press 3 To select 13 press and hold 10 follow by 3 To select 23 press and hold 10 2 times follow by 3 Random Playback Press RANDOM during playback to play the tracks in random shuffle order Press it again to cancel Tips RANDOM is SHUFFLE on screen Stopping Playback 1 Press Stop on remote control during playback to stop playback That position is stored in memory 2 Press PII to continue Playback starts from the position at which it was stopped Note Music playback has no stop function Use button to pause playback Fast Forward Fast Reverse 1 During playback press and hold I or gt gt I Unit scans at the speed of x2 x4 x8 x16 x20 2 To resume normal playback at a desired point press Pll Note No sound is played during fast forward fast reverse Finding the Beginning of Tracks During playback press k lt or DPI I 4 Press to start playback from the beginning of the previous chapter or track P Press to start playback from the beginning of the following chapter or track Pause Playback During playback press Press again to resume playback A B Repeat Playback This feature allows you to loop playback a section of the movie audio starting from Point A to B 1 Press the PII button to play the movie audi
6. enter VIDEO setup Selected item will be highlighted You can set BRIGHTNESS CONTRAST SATURATION HUE SHARPNESS 2 Press 4 PPI button to select item Rotate VOL knob to make adjustments 3 Press and hold VOL knob to exit settings SETTING UP THE DVD PLAYER You can flexibly customize the unit to suit your preference You can set the language and other video and audio settings so when playback starts it will always use your preferred settings Important 1 Load any disc into the unit before you can access the setup 2 Press Setup on the remote control 3 Use to return enter category Settings Category Options TV System NTSC PAL AUTO Auto Play ON OFF TV Type 4 3PS 4 3LB 16 9 Password Setup password System Setup Rating Setup rating level Default Restore to factory settings OSD Language Audio Language Language Setup Subtitle Language Select preferred options appear on screen Menu Language MPEG4 Language Brightness Contrast Video Setup m keys on remote control to setup Saturation Sharpness Setting Rating Password 1 Press Setup on the remote control 2 Using Navigation keys select System Setup gt Password and press Enter 3 Enter the default password 0000 and press Enter to unlock first and then enter new 4 digit password and press Enter The unlock logo will switch to lock indicating password has been set Note T
7. on remote control to return to root menu Note Some DVD may not contain root menu Slow motion playback This feature lets you slow down playback 1 Press Slow on the remote control during playback 2 Pressing it repeatedly will switch you to the following steps 1 2 1 3 1 4 1 5 1 6 1 7 Note To resume normal playback press PLAY PAUSE PII There is no sound during slow motion playback With some disc slow motion may be unclear during slow motion playback Zooming in During Playback You can zoom in into the picture during playback 1 Press ZOOM on the remote control during playback 2 Every time you press this button the unit will zoom 2 3 4 1 2 1 3 1 4 times and OFF 11 12 Frame by frame playback This lets you move ahead one frame at a time during playback 1 Each time you press and hold Step button on remote control you move ahead one frame To return to normal playback press PAL NTSC P N Press and hold P N button to switch between PAL NTSC system Return Go Back Press MENU on remote control to go back one level or return to previous menu CUSTOMIZING AUDIO VIDEO SETTINGS AUDIO SETUP 1 Press VOL knob to enter AUDIO setup Selected item will be highlighted You can set BASS TREBLE BALANCE FADER TA VOLUME 2 Press 14 PPI button to select item Rotate VOL knob to make adjustments 3 Press VOL knob to exit settings VIDEO SETUP 1 Press and hold VOL knob to
8. 1517 Rear Camera In Blue comet 12141618 17 A Connect to rear camera output 1 RCA Audio Input Black CAMERA VED VIDEO OUT 2 FUSE TOA Left White Right Red Subwoofer Output Green Plug Yellow CONTROL WIRE Parking Gray Connect this wire to car hand brake system Auto Antenna Remote Control Blue Rear Camera Red Connect to back rear camera During back gear condition this wire should be connected to hight voltage ISO CONNECTOR 4 MEMORY 12V 7 12V TO IGNITION KEY 8 GROUND NOTE connector A no 7 must be connected by car ignition key in order to avoid that car battery becomes weak when the car will be not used for long period CONNECTOR B REAR RIGHT SPEAKER REAR RIGHT SPEAKER FRONT RIGHT SPEAKER FRONT RIGHT SPEAKER FRONT LEFT SPEAKER FRONT LEFT SPEAKER REAR LEFT SPEAKER REAR LEFT SPEAKER Maintenance FUSE REPLACEMENT If the fuse blows check the power connection and replace the fuse If the fuse blows again after the replacement there may be an internal malfunction In this case consult your nearest repairing center Warning Use the specified amperage fuse for each lead Use of a higher amperage fuse may cause serious damage DRIVING WITHOUT VIDEO DISPLAY Follow the installation below so when the car is in motion no video will come out from the LCD screen Only sound can be
9. ady inserted press MODE to switch to disc mode 2 On DVDs and video CDs with playback control PBC menu screens may appear automatically If this happens perform the operation described below to start playback CAUTION Make sure that the Video TV system settings is set correctly according to your disc your playing If you are not sure leave it set to Auto Improper setup of TV system might cause the video to stop skip pause playing although audio might continue to play You can setup video TV settings using the SETUP feature of the remote control Refer to SETTING UP THE DVD PLAYER section DVD menu Press 9 to select the desired item then press Enter Video CD menu Use the number keys 0 to 9 to select the desired number then press Enter The menu screen does not appear when the PBC function is turned off In this case press and hold button to turn on PBC feature Turning PBC ON OFF VCD only PBC Playback Control is a feature found on VCD 2 0 and SVCD 1 0 PBC allows control of the playback of play items and the possibility of interaction with the user through the remote control or some other input device available If it s on the player won t auto start after inserting the disc because it will take time to select program on disc if it s off the player will auto playback the program on disc one by one 1 To turn ON function
10. ct the AUDIO OUT and VIDEO OUT port at the back of head unit to the LINE IN of external AV device 2 Press and hold MODE Select DISC USB or SD MMC source 3 Press DUAL key on remote control to select which mode you want to control T TUNER C CARD U USB D DISC Note You will need to connect an external portable TV or monitor when using this feature VIEWING PHOTO 1 Insert disc USB memory stick or SD MMC card containing picture file format 2 Using remote select PHOTO function and press ENTER 3 Using remote V select a file to view and press ENTER Note Press MENU on remote control to exit photo playback Press MENU on remote control will also go back one level or return to previous menu RESET Reset button is placed on the housing To reset use a sharp point object and press and hold the RESET button for 2 seconds The reset button is to be activated for the following reason Initial installation of the unit when all wiring is completed All the function buttons does not operate Error symbol on the display LISTENING TO RADIO Band BD Pressing this key repeatedly will toggle cyclically between each band FM1 FM2 FM3 MW AM 1 MW AM 2 Automatic or Manual tuning SEEK SEEK When pressed short these keys are operated as MANUAL tuning mode When pressed longer than 1 sec they are operated as AUTOMATIC tuning mode Auto Seek Preset scan AS PS Preset Scan PS
11. evel Leave player off for an hour or so and then try again Adjust volume to desired level Check wiring connections Adjust installation angle to less than 30 from horizontal Clean the disc or play a new one Press the RESET button Remove front panel press RESET button and re insert front panel Insert the antenna cable firmly into connector Select station manually Specifications 50703 AM FM DVD Receiver with 7 TFT Display CD MP3 PLAYER Signal to noise ratio Channel separation Frequency response RADIO FM Section Frequency range Channel step Sensitivity Stereo separation Signal to noise ratio MW AM Section Frequency range Usable sensitivity TONE CONTROLS Bass at 100Hz Treble at 10kHz LINE OUT Output Impedance AMPLIFIER Maximum output power GENERAL Power supply Speaker impedance Fuse gt 60 dB gt 50 dB 1kHz 20Hz 20 kHz 87 5 107 9 MHz America 87 5 108 MHz Europe 200 kHz USA 50 kHz Europe 2 8 uV 30 dB 50 dB 530 1710 KHz America 522 1620 KHz Europe 32 dBuV 10 dB 10 dB 750 mV 10k Ohm 85 watts x 4 channels 12V DC 10 8 15 6V allowable 4 or 8 Ohm 10A over at a collection point for the recycling of electrical and electronic appliances The symbol on the product the instructions for use or the packing will inform about the methods for disposal Instructions on environment protection K Do not dispo
12. g the front panel The front panel of this unit can be detached in order to prevent the unit from being stolen Before detaching the front panel be sure to press the D button 1 OFF first Then press the button and detach the panel by pulling it towards you as illustrated Notes Do not press the front panel hard against the unit when attaching it It can be easily attached by pressing it lightly against the unit When you carry the front panel with you put it in the supplied front panel case Donot press hard or give excessive pressure to the display window of the front panel when attaching it to the unit Detaching and attaching the display screen When the lower part of the front panel control board is detached the unit can be power off Do press hard or give excessive pressure to the display window of the front panel when attaching it to the unit Pay attention not to put any pressure on the display or control buttons attach Push and insert the screen all the way down until you heard 2 click sounds indicating both hole connector is attached properly To detach 1 Slide the screen release button to the right side 2 Hold the display by the trim not screen Gently lift the display right and upwards Notes Do not press the front panel hard against the unit when attaching it It can be easily attached by pressing it lightly against the unit When you carry t
13. he default password is In case you forgot your password you can use the master password 0000 to unlock and reset the password Master password will only work while Setup button is press during playback 13 Troubleshooting Symptom No power Disc cannot be loaded or ejected No sound Sound skips Keys on front panel do not operate Radio does not work or the radio automatic selection function does not work Cause The car ignition switch is not on The fuse is blown There is a disc already in the DVD player Disc is inserted upside down Disc is dirty or defective Car interior temperature is too high Excess atmospheric humidity or condensation is present Volume is set to minimum Wiring not properly connected Head unit is installed at an angle of greater than 30 from horizontal Disc is dirty or defective The built in microprocessor is not operating properly due to noise Front panel is not properly fixed in place Antenna cable not connected The signals are too weak to be received properly Solution If the head unit is properly connected to the car accessory power circuits but the engine is running switch the ignition key to the ACC position Replace the fuse Remove disc in player and try again Insert the disc with the label facing up Clean the disc or play a new one Allow temperature to cool down to a normal l
14. he front panel with you put it in the supplied front panel case zd Moving the screen forward T Depending on vehicles s dashboard design there might be instances where the display screen might collide bump into the dashboard s control knobs Follow the steps below to move the screen forward 1 Slide the switch to UNLOCK position 2 Hold it in UNLOCK position then move the screen forward The unlock switch ft will move to LOCK position automatically when in place Cleaning the connector The unit may not function properly if the connectors Main unit between the unit and the front panel are contaminated with dirt In order to prevent this from happening detach the front panel by pressing the button and clean the connector from time to time Clean the connector with a cotton swab together with contact cleaner as illustrated Be sure to clean them carefully pin by pin and make sure not to damage the Cotton Swab connecting points Rear of front panel WIRE CONNECTION IN OUT CONNECTOR DVD Audio Out White L Red R Connect this wire to rear seat A V monitor system to enjoy DVD movie Audio Out Front White L Red R A BACK GEAR AUDIOIN SUBWOOFER Audio Out Rear White L Red R RED waite _ YELLOW Video Out Yellow Connect to external A V system to display Video In Yellow i REAR Connect to external Video equipment d 1113
15. heard from speaker Note Only sound can be heard when car is in motion Refer and follow your country s law regarding driving with video Caution Do not attempt to install it by yourself if the instruction is not clear to you Consult you dealer con cerning the installation procedures TOP VIEW OPEN 4 t To Hand brake switch Ch BLUE p RED x e FRONT Steps SIDE 1 Connect the gray wire to the hand brake system 2 Check your hand brake switch and make sure it is connected to car body chassis co p and properly grounded INSTALLING REAR CAMERA FOR PARKING OR REVERSE MOTION You can install a separate camera at the rear of the car so when doing parking or reverse motion the unit will automatically switch the video to the rear camera to guide the driver TOP VIEW Jor O OPEN O thea 006 E 4l Cogg X xp cM ul RED To rear camera video out aS To reverse gear control switch FRONT 5 Steps SIDE a 1 Connect the Rear Camera IN plug to the rear camera s video out plug C gt 2 Connect the RED wire to REVERSE gear control switch 3 Check your gear control switch and make sure it is connected to 12V Locations of parts and controls Main unit 1 POWER ON OFF b SELECT FUNCTION BUTTON 3 EQUALIZER AF function BUTTON ALTERNATIVE FREQUENCIES 4 LOUDNESS TA functi
16. o 2 Once you have located the section you wish to playback on loop repeat press and hold A B button You will see Rep A on the screen 3 Let the movie audio play on until you have reached the end of the section you wish to watch on continuous loop Once you have reached this point press and hold A B button again Rep A B will appear on your screen Playback will now start from Point A 4 To stop A B repeat playback press and hold A B button once more until A B CANCEL disappears and normal playback resumes Displaying information OSD video files only During playback you can see all information and current play settings Display will show related playback time elapse time title number chapter number and other information 1 Press OSD on the remote control once Unit will display the play time and the disc elapse time 2 Press it once more and all other settings information will be displayed LISTENING TO MP3 WMA Folder Name Track file names Norah Come away Player File Info Norah Seven ye Come away J Cold col Feelin OAH RTT 01 38 cm 02 19 1 Y J Come away Photo Video Shuffle File Repeat Repeat tracks You can choose between repeat playback of a single track or all tracks 1 Press REPEAT on the remote control during playback 2 Every time you press this button the unit switches to the following settings Repeat 1 71 Repeat
17. on BUTTON 12 TRAFFIC ANNOUNCEMENT PAL NTSC SYSTEM PTY function PROGRAM TYPE MODE BUTTON MODE DVD CD TRACK SEARCH BUTTON m4 1 AUTO SEEK TUNING m4 gt MUTE BUTTON MUTE 10 PANEL RELEASE BUTTON 11 TFT DISPLAY PANEL RELEASE BUTTON 12 TFT LCD DISPLAY 13 DISC EJECT BUTTON LJ MB 14 DISC SLOT 15 SD MMC CARD SLOT 16 USB PORT 17 FRONT AUX IN refer 18 RESET BUTTON 2 07 8 7 15 11 16 10 N vi Tr 1 Locations of parts and controls Remote Control POWER ON OFF aa MODE 1 2 23 PLAY PAUSE TITLE PLAYBACK CONTROL SELECT SEEK SEEK CD TRACK SEARCH VOL VOL GOTO AUDIO 10 ENTER 11 NAVIGATION 12 AUTO SEEK PRESET SCAN REPEAT 13 RANDOM BAND LOUDNESS OY UTOR 16 SUBTITLE 17 SETUP 18 EQUALIZER ANGLE 19 SLOW MOTION 20 ZOOM A B REPEAT 21 STOP 22 CLOCK ON SCREEN DISPLAY 23 MUTE 24 MAIN MENU 25 STEP FRAME BY FRAME PLAYBACK 26 PAL NTSC SYSTEM 27 PROGRAM TYPE 28 ALTERNATIVE FREQUENCIES 29 TRAFFIC ANNOUNCEMENT 30 10 TRACK SEARCH DOWN UP 31 TWO DIGIT TRACKS SEARCHS 32 KEYPAD Use and care of the remote control Installing the battery Slide the tray out on back of the remote control and insert battery with the
18. press on the remote control To turn OFF press the button again Note Not all VCD SVCD disc have PBC functions Repeat Playback FOR VCD 1 Press REPEAT on the remote control during playback 2 Every time you press this button the unit switches to the following settings Repeat 1 Repeat the current playback track Repeat All Repeat all folders and tracks Repeat Off Turn OFF repeat function Note PBC feature in VCD disc needs to be STOP in order to use Repeat playback 10 FOR DVD You can choose between repeat playback of a title or chapter 1 Press REPEAT on the remote control during playback 2 Every time you press this button the unit switches to the following settings Repeat Title Repeat the current playback title Repeat Chapter Repeat the current playback chapter Repeat All Repeat all folders and tracks Repeat Off Turn OFF repeat function Searching for particular track using GOTO You can use the GOTO function to search for a desired track number or particular point of a track to play 1 Press GOTO on the remote control during playback Time and track number search appears 2 Enter the minutes and seconds for the currently played track if you want to search by time Press Enter 3 Enter track number if you want to search by tracks Press Enter Changing audio language during playback Multi audio DVDs can provide audio playback with different languages and different system
19. s Dolby Digital DTS etc With DVDs featuring multi audio recordings you can switch between languages audio systems during playback VCD can provide different audio languages usually divided into left and right channels 1 To choose different audio simply press Audio on the remote control repeatedly during playback Note With some DVDs switching between languages audio systems may only be possible using a menu display You can also switch between languages audio systems using SET UP MENU or tap the screen then press Audio Changing the subtitle language during playback Multi subtitle With DVDs featuring multi subtitle recordings you can switch between subtitle languages during playback 1 Press SUBT on the remote control during playback Press repeatedly until the supported desired subtitle appears Note With some DVDs switching between subtitles may only be possible using a menu display You can also switch between subtitles using SET UP MENU or tap the screen then press Subtitle Changing the viewing angle during playback Multi angle DVD only With DVDs featuring multi angle scenes shot from multiple angles recordings you can switch among viewing angles during play back 1 Press and hold Angle on the remote control during playback of a scene Title DVD only During DVD playback press Title on remote control to return to FIRST title Return to Root Menu DVD only During DVD playback press MENU
20. se of this product in the usual household garbage at the end of its lifecycle hand it E The materials are recyclable as mentioned in this marking By recycling material recycling or other forms of reutilization of old appliances you are making an important contribution to protect our environment Please inquire at the community administration for the authorized disposal location 15
21. the current playback track Repeat All At Repeat all folders and tracks Return Go Back Press TITLE on remote control to go back one level or return to previous menu TITLE During music playback press TITLE on remote to return to audio file lists AUX IN An external audio source e g portable MP3 player can be connected to the AUX IN socket to be played back by the vehicle loudspeakers 1 Connect the AUX IN socket with the audio output of the external device USB SD MMC Memory Card The device is equipped with a USB interface and a memory card reader for AUXIN USB PORT SD MMC cards MP3 or WMA files stored on these media can be played Note Due to the great variety of devices with USB and SD MMC card interfaces that sometimes have manufacturer specific functions we cannot guarantee that all media will be recognized and that all operational functions will be available with this device You cannot operate USB hard drives on the device It maybe necessary to turn the flash memory ON so that it can be read Plug your USB storage medium into the USB port you use a memory card insert it into the memory card reader 3 The player automatically switches to the input used and starts playback 4 See the section on operations common for audio video files on how to control USB or memory card playback PLAYING DVD VIDEO CD MP4 Playback 1 Insert a disc When the disc offers a menu the menu is displayed When a disc alre
22. uttons Selecting a source MODE Press MODE repeatedly to switch between TUNER DISC AUX IN USB SD MMC mode Adjusting Volume Head Unit Rotate VOL knob right or left to increase or decrease volume Remote Control Press VOL or VOL to increase or decrease volume Mute Button Head Unit Press MUTE button to mute the sound at once Press again to return to previous volume level Remote Control Press J button Loud Button LOUDNESS Head Unit Press LOUD button to turn on off LOUD feature Remote Control Press and hold LD button on remote control to turn on off LOUD feature Equalizer EQ Main Unit On main menu touch SETTINGS gt EQ SETTINGS Under Dsp preset select by touching the desired EQ setting On main unit press the EQ button Remote Press EQ button Under Dsp preset select the desired EQ by pressing 4 sm Subwoofer Press EQ button to EQ setting select SUBWOOFER On Off by pressing m CLOCK To show clock switch to RADIO mode and press CLK on remote control Tips You can also touch the frequency no on the screen to show the clock How to Set Clock 1 Press CLOCK on main menu 2 Press V to set the time 3 Press X to save and exit DUAL SETTINGS DUAL is a feature that lets user listen to radio while the passenger at the back can watch video This unit supports connection of external AV device such as portable TV through the AUDIO OUT and VIDEO OUT port 1 Conne
Download Pdf Manuals
Related Search