Home
        EMC CE test report
         Contents
1.                                                                                  4  1 SUMMARY OF TEST             5         2   000008 nenn nnnnnnnnnnnnnnn nennen 5  1 1 MEASUREMENT                                            nenn nnnnn nenn nennen 7   2 GENERAL                                  2       8  2 1 GENERAL DESCRIPTION OF                                                                   8  2 2 DESCRIPTION OF TEST MODE                      9  2 3 GENERAL DESCRIPTION OF APPLIED 5                               8   10  2 4 DESCRIPTION OF SUPPORT       nnnm eren entes nenn nnnnnnnnnn nenn 10  2 5 CONFIGURATION OF SYSTEM UNDER     5                            10   3 EMISSION TES ER T                            E 11  3 1 CONDUCTED EMISSION                                                                 11  3 1 1 LIMITS OF CONDUCTED EMISSION MEASUREMENT                                                  11  3 1 2 TEST                                    11  3 1 3 TEST                                22  110 1                                                                         anna Donau Danke na adea aaa ea aaa a aaa ea            12  3 1 4 DEVIATION FROM TEST 5                           nennen 12  3 1 5 Mz 12  3 1 6 EUT OPERATING                   6            12  3 1 7 gaze c                                                                    13   3 2 RADIATED EMISSION                                  20  3 2 1 LIMITS OF RADIATED EMISSION MEASUREMENT                 ener 20
2.          0 5m  Mains         Unscreened AE1  multi wire    cable            Insulation is  optional    Ground Reference Plane    NOTE  The EUT clearance from any metallic obstacles shall be at least 0 5m   All non excited input ports of the CDNs shall be terminated by 500 loads     Note  1  The EUT is setup 0 1m above Ground Reference Plane   2  The CDNs and   or EM clamp used for real test depends on ports and cables configuration of  EUT     For the actual test configuration  please refer to the related item     Photographs of the  Test Configuration     NOTE     The equipment to be tested is placed on an insulating support of 0 1 meters height above a ground  reference plane  All relevant cables shall be provided with the appropriate coupling and decoupling  devices at a distance between 0 1 meters and 0 3 meters from the projected geometry of the EUT on  the ground reference plane     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 52 of 66 Report Version 1       BUREAU    Report No   RM121207N012 1    4 6 6 TEST RESULTS       RJ45 Port Data Transmitting   100Mbps More than 10      TEST MODE    TEST VOLTAGE       DC 5V From Adapter  Input AC230V 50Hz       ENVIRONMENTAL    fie 24 2deg  C  56 2  RH             TESTED BY  Harry          Test  Volt   jecti  d Frequency Test
3.          No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 59 of 66 Report Version 1         Report No   RM121207N012 1    RADIATED EMISSION TEST   lt Above 1GHz gt                                     EIIIIIITIE  ZI I 1 IJ ST  est                        cre  EI I I I 1 1 2        nmmummmmmmm    ne     an n2enrr                    eS                   LL    EITITITITI  EIL IJ 1 Es  uis T I  1 T Tus  ENSI LI I  er                                            No  34  Ch    i i Rd   Houji Tel  7 151  Bureau Veritas Shenzhen Co   Ltd             2    Guantai Rd   Houjie el   86 755 8600 015  Dongguan Branch en    Fax   86 755 8600 0159  Guangdong 523942  China    Email  customerservice dg cn bureauveritas com       Page 60 of 66 Report Version 1       Report No   RM121207N012 1    VERITAS    HARMONICS EMISSION TEST  amp     VOLTAGE FLUCTUATIONS AND FLICKER TEST             WR jag                   1212078012                         Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch    No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China    Page 61 of 66    Tel   86 755 8600 0151  Fax   86 755 8600 0159  Email  customerservice dg cn bureauveritas com       Report Version 1       Report No   RM121207N012 1    R S TEST             EFT TEST  MAINS 
4.        RJ45 Port Data Transmitting   10Mbps More than 10      DC5V From Adapter Input       RJ45 Port Data Transmitting   100Mbps More than 10         AC230V 50Hz               FOR HARMONIC  FLICKER AND IMMUNITY TEST                Test Mode Test Voltage  RJ45 Port Data Transmitting DC5V From Adapter Input   100Mbps  AC230V 50Hz          Bureau Veritas Shenzhen Co   Ltd     Dongguan Branch    No  34  Chenwulu Section  Guantai Rd   Houjie    Town  Dongguan City   Guangdong 523942  China    Page 9 of 66    Tel   86 755 8600 0151  Fax   86 755 8600 0159  Email  customerservice dg cn bureauveritas com       Report Version 1       Report No   RM121207N012 1    2 3 GENERAL DESCRIPTION OF APPLIED STANDARD    The EUT is a RF product  According to the specifications of the manufacturer  it must  comply with the requirements of the following standards     EN 301 489 1 V1 9 2  2011 09    EN 301 489 17 V2 2 1  2012 09    EN 55022 2010  Class B   EN 61000 3 2 2006 A1 2009 A2 2009  EN 61000 3 3 2008   EN 61000 4 2 2009   EN 61000 4 3 2006   A1 2007   A2 2010  EN 61000 4 4 2004   A1 2010   EN 61000 4 5 2006   EN 61000 4 6 2009   EN 61000 4 11 2004    According to clause 7 1  Table 1  and 7 2  Table 2  of EN 301 489 1  all test items  have been performed and recorded as per the above standards    Note  The above EN basic standards are applied with latest version if customer has  no special requirement     2 4 DESCRIPTION OF SUPPORT UNIT  The EUT has been tested as an independent unit togethe
5.      5        00  0 500000      33  4 1 GENERAL DESCRIPTION                                   nn emen nn eren    33  4 1 1 GENERAL PERFORMANCE CRITERIA DESCRIPTION                     eere 34   4 2 ELECTROSTATIC DISCHARGE IMMUNITY TEST                       36    No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Bureau Veritas Shenzhen Co   Ltd  iius i s i            Town  Dongguan City  Fax   86 755 8600 0159  Dongguan Branch      Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Page 2 of 66 Report Version 1     amp U VE    Report No   RM121207N012 1   4 2 1 TEST SPECIFICATION rait cie hib tet ere    D dee ett a Ye ed 36  42 2  TESTINSTHUMENT              een euren 36  423  TEST PROCEDURE                      tr rite ea re e                  nee 37  4 2 8   DEVIATION FROM TEST STANDARD                 esee enemies 37  425  TEST SETUP    cte tt ene rre ded ae HE B V e 38  4 26  TEST RESULTS  icit           tazen pie pue          cuum irs 39  4 3 RADIATED  RADIO FREQUENCY  ELECTROMAGNETIC FIELD IMMUNITY TEST  RS     40  4 3 1 TEST SPEGIEIGATION          40  432 TEST INSTRUMEN T            ea 40  438 TEST PROGEDURE     eternidad a dtd 41  434 DEVIATION FROM TEST STANDARD                 eee emen nennen 41  495   TEST SETUP o dato nuda e etai               42  436 TEST RESULTS   uiti etie iti           De da                   de e ds 43  4 4 ELECTRICAL FAST TRANSIENT                   0404242240     0000        nre 44  4 4 1 TEST  S
6.     4 4 6 TEST RESULTS                RJ45 Port Data Transmitting DC5V From Adapter  TEST MODE Test Voltage    100Mbps More than 10     Input AC230V 50Hz  ENVIRONMENTAL  CONDITIONS 22 1deg  C  54 7  RH TESTED BY  xuehui                Pulse Voltage  Pulse Polarity       RJA Por  A  A T T7 d             NOTE  A  There was no change compared with initial operation during the test       No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151   Bureau Veritas Shenzhen Co   Ltd     Town  Dongguan City  Fax   86 755 8600 0159   Dongguan Branch            Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Page 46 of 66 Report Version 1        amp U VE    BURA  SVL    1828    Report        RM121207N012 1    4 5 SURGE IMMUNITY    4 5 1 TEST SPECIFICATION    Basic Standard  EN 61000 4 5   Wave Shape  Combination Wave  1 2 50 us Open Circuit Voltage  8 20 us Short Circuit Current   Test Voltage  Power port  0 5  1 kV   Surge Input Output  L N  Generator Source Impedance  2 ohm between networks  Polarity  Positive Negative  Phase Angle  0   90   180   270    Pulse Repetition Rate  1 time   min   Number of Tests  5 positive and 5 negative at selected points    4 5 2 TEST INSTRUMENT                     Manufacturer   Model No   Serial No    Last Cal            Cal     TESEQAG   CDN 3061 1361   Feb  14 12   Feb  13 13  Module  Telecom Surge Module   TEsEQAG      9 3060   4404   Feb  15 12   Feb  14 13  Mainframe    HAEFELY   SWPS8000       NOTE  1  The 
7.     o    1828    Report No   RM121207N012 1    3 2 CONDUCTED EMISSION MEASUREMENT AT  TELECOMMUNICATION PORTS  3 2 1 LIMIT OF CONDUCTED COMMON MODE DISTURBANCE AT  TELECOMMUNICATION PORTS    TEST STANDARD  EN 55022  FOR CLASS A EQUIPMENT    FREQUENCY Voltage Limit  dBuV  Current Limit  dBuA    MHz     Quaskpeak          FREQUENCY     MHz  Quasi  74   64 40     30 30     20    NOTE   1  The limits decrease linearly with the logarithm of the frequency in the range  0 15 MHz to 0 5 MHz           3 2 2 TEST INSTRUMENTS    Equipment               Manufacturer          No  Serial No  Last Cal  Next Cal  _                       EURE 558 Cable    Impedance Stabilization  tEsEQ ISN T800  27957 Oct  10 12 Oct  09 13  Network  ADT   Cond  N       NOTE  1  The calibration interval of the above test instruments is 12 months and the  calibrations are traceable to CEPREI CHINA and NIM CHINA     2  The test was performed in Shielded Room 553     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 15 of 66 Report Version 1       Report No   RM121207N012 1    3 2 3 TEST PROCEDURE    For ISN     a  The EUT was placed 0 4 meters from the conducting wall of the shielded room  and connected to the power mains through a line impedance stabilization  network  LISN   Other support units were connected t
8.    ACCREDITED  Test Lab                                          Report No   RM121207N012 1 Cert 2951 01  Applicant Shenzhen Gembird Electronics Ltd   Address 5F  Building B  Shi Feng Industrial Zone  Hua Ning Rd   Xin Wei Village  Da Lang  Street  Long Hua  Bao An Area  Shenzhen 518109  Guangdong Province  P R C   Manufacturer or   Shenzhen Gembird Electronics Ltd   Supplier  5F  Building B  Shi Feng Industrial Zone   Address Hua Ning Rd   Xin Wei Village  Da Lang Street   Long Hua  Bao An Area  Shenzhen 518109   Guangdong Province  P R C   Product Wireless broadband router  300 Mbps  Brand Name N A  Model WNP RT 001    p  Additional Model     eam   amp  N A  Model Difference  Date of tests Dec  07  2012   Jan  17  2013             The submitted sample of the above equipment has been tested according to the following European  Directive   Radio Equipment and Telecommunications Terminal Equipment directive 1999 5 EC article  3 1 b  and the requirements of the following standards         X  EN 301 489 1 V1 9 2  2011 09    X  EN 301 489 17 V2 2 1  2012 09     CONCLUSION  The submitted sample was found to COMPLY with the test requirement    Tested by Breeze Jiang Approved by Sam Tung  Project Engineer   EMC Department Manager   EMC Department       mi    Date  Jan  17  2013    This report is for your exclusive use  Any copying or replication of this report to or for any other person or entity  or use of our name or trademark  is  permitted only with our prior written permission 
9.    b  The frequency range was swept from 150 kHz to 80 MHz  using the signal level  established during the setting process and with a disturbance signal of 80 96  amplitude  The signal was modulated with a 1 kHz sine wave  pausing to adjust  the RF signal level or the switch coupling devices as necessary  The sweep rate  was 1 5 x 10  decades s  Where the frequency range is swept incrementally  the  step size was 1   of preceding frequency value from 150 kHz to 80 MHz     c  One of the        not used for injection was terminated with 50 9    providing only  one return path  All other CDNs were coupled as doupled networks     d  The dwell time at each frequency shall not be less than the time necessary for the  EUT to be exercised  and able to respond  Sensitive frequencies such as clock  frequency ies  and harmonics or frequencies of dominant interest  was analyzed  separately     e  Attempts was made to fully exercise the EUT during testing  and to fully  interrogate all exercise modes selected for susceptibility     4 6 4 DEVIATION FROM TEST STANDARD    No deviation     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 51 of 66 Report Version 1       Report No   RM121207N012 1    4 6 5 TEST SETUP    2222    0 5m        0 1m   L   0 3m    CDN T2 T4 Mains       Balanced  pair
10.   3 2 2     5                        5                                                   21  3 2 3 TEST                                       arse ae aa e ar isse setas assa asas sse sa gases 22  3 2 4 DEVIATION FROM TEST STANDARD                                             23  3 2 5      Pics aces EC 23  3 2 6 TEST RESULTS  BELOW       2             24  3 2 7 TEST RESULTS   ABOVE 1GH 2     een an aan 26   3 3 HARMONICS CURRENT MEASUREMENT      2          2000                    27  3 3 1 LIMITS OF HARMONICS CURRENT                                      27  3 3 2 TEST                     5       0          seii nenn siis rise sies ss rr soir sarei 28  3 3 3 TEST                                             assess asse sa gases 28  3 3 4 DEVIATION FROM TEST 5                          2888                  29  3 3 5 TEST SE WU Ex 29  3 3 6 EUT OPERATING                     6            29  3 3 7                               ERES 29   3 4 VOLTAGE FLUCTUATION AND FLICKS                                    30  3 4 1 LIMITS OF VOLTAGE FLUCTUATION AND FLICKS MEASUREMENT                          30  3 4 2 TEST                       5                    80  3 4 3 TEST                                                                80  3 4 4 DEVIATION FROM TEST 5                                31  3 4 5        5          ETT 31  3 4 6 EUT OPERATING                   6           31  3 4 7                                                                                        32   4 IMMUNITY
11.   amp  Current Probe     EUT                      Capacitive CMAD  vatage  optional          30cm 4     IEC 135308    AE   Associated equipment  EUT   Equipment under test             Common mode Absorbing Device    It is not required to place both the current probe and the capacitive voltage probe in the  measurement set up at the same time unless simultaneous current and voltage measurements  are to be made     NOTE    1  The methods of conformance testing were selected according to EN55022  2010  section  9 6 1 of  measurement method using an ISN with a longitudinal conversion loss  LCL  as defined in section   9 6 2     2  When measurements were performed on a single unscreened balanced pair  an adequate ISN for  two wires were used  when performed on unscreened cables containing two balanced pairs  an  adequate ISN for four wires were used     3  The communication function of EUT was executed and ISN was connected between EUT and  associated equipment and the ISN was connected directly to reference ground plane     3 2 6 EUT OPERATING CONDITIONS   a Turn on the power of the EUT    b EUT in the transfer rate more than 10  of the state test    c EUT was operated according to the type used was description in  manufacturer s specifications or the user s manual     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen
12.  2010 immunity test  Performance Criterion A   EN 61000 4 5 2006  Surge immunity test Bass                                    Performance Criterion A    Performance Criterion A    ua DS Meets the requirements of  EN 61000 4 6 2009  disturbances  induced by PASS 9    radio frequency fields    Meets the requirements of  Voltage Dips   1 0  residual      Performance Criterion A  Voltage dips  short 2 0  residual      EN 61000 4 11 2004 Jinterruptions and voltage PASS Performance Criterion A  variations immunity tests 3  70  residual      Performance Criterion A  Voltage Interruptions     1  096 residual      Performance Criterion B       No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 6 of 66 Report Version 1       Report No   RM121207N012 1    1 1 MEASUREMENT UNCERTAINTY    Where relevant  the following measurement uncertainty levels have been estimated  for tests performed on the EUT as specified in CISPR 16 4 2     This uncertainty represents an expanded uncertainty expressed at approximately the  95  confidence level using a coverage factor of k 2     Uncertainty  150    2  30MHz       2 94 dB  Conducted emission Telecom Port  150kHz   30MHz     2 66 dB    30MHz 1GHz     3 40 dB  Radiated emissions 1GHz   6GHz     2 20 dB         No  34  Chenwulu Section  Guantai Rd   Houji
13.  3m  Support Units     gt  2    iN Turn  Absorber    mE           Ground Plane    Spectrum analyzer    EEE  0000  000    Tel   86 755 8600 0151  Fax   86 755 8600 0159  Email  customerservice dg cn bureauveritas com    No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch             Page 23 of 66 Report Version 1     amp U VE    B  URS  Sul    1828    BUREAU  VERITAS    3 3 6 TEST RESULTS  BELOW 1GHz     TEST MODE    TEST VOLTAGE    Report No   RM121207N012 1    RJ45 Port Data Transmitting   100Mbps More than 10      DC 5V From Adapter  Input AC230V 50Hz    ENVIRONMENTAL    CONDITIONS 21deg  C  5296 RH    FREQUENCY  RANGE       DETECTOR  FUNCTION  amp   RESOLUTION  BANDWIDTH    TESTED BY  Robert    Quasi Peak   120kHz             ANTENNA POLARITY  amp  TEST DISTANCE  HORIZONTAL AT 3M                                                 Correction  Raw   Emission non   Antenna   Table  No  iro Factor Value Level   Eu Height Angle   dB m     dBuV    dBuV m   cm   Degree   1 138 64 12 98 19 50 32 48 40  7 52 196 36  2 174 64 11 22 25 20 36 42 40  3 58 268 236  3 257 46 14 71 24 00 38 71 47  8 29 100 360  4 312 48 15 75 30 00 45 75 47  1 25 100 161  5 468 44 20 86 20 34 41 20 47  5 80 145 114  6 827 34 27 40 13 75 41 15 47  5 85 245 0  REMARKS  1  Emission level dBuV m  Raw Value dBuV    Correction Factor dB m   2  Correction Factor dB m    Antenna Factor  dB m    Cable Factor  dB   3  The ot
14.  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China    Tel   86 755 8600 0151  Fax   86 755 8600 0159  Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch             Page 40 of 66 Report Version 1       Report No   RM121207N012 1    4 3 3 TEST PROCEDURE    The test procedure was in accordance with EN 61000 4 3   a  Thetesting was performed in a fully anechoic chamber     b  The frequency range is swept from 80 MHz to 1000 MHz  amp  1400 MHz to 2700  MHz with the signal 8096 amplitude modulated with a 1 kHz sine wave         The dwell time at each frequency shall not be less than the time necessary for  the EUT to be exercised and to respond  but shall in no case be less than 0 5s     The field strength level was 3 V m     The test was performed with the EUT exposed to both vertically and horizontally  polarized fields on each of the four sides     4 3 4 DEVIATION FROM TEST STANDARD    No deviation     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 41 of 66 Report Version 1       Report No   RM121207N012 1    4 3 5 TEST SETUP          RF Amplifier    RF Generator  and  control system       Monitoring  system          For the actual test configuration  please refer to the related item     Phot
15.  Co   Ltd   Dongguan Branch       Page 18 of 66 Report Version 1    nu VE    B  URS  SIL    1828    Report No   RM121207N012 1  3 2 7 TEST RESULTS             TEST MODE RJ45 Port Data Transmitting          m         100Mbps more than 10   BANDWIDTH   DC 5V From Adapter RJ45 TELECOM  TEST VOLTAGE PHASE   Input AC230V 50Hz PORT  100Mbps   ENVIRONMENTAL o    CONDITIONS 17deg  C  50  RH TEST BY Bin                      Reading Value   Emission Level Limit   dB  uV    dB  uV    dB  uV      s 1622600 ese   5093 14825   tosr   re    74   64  1949         4  18 24312  9 62   50 95   48 23   60 57   57 85 74   64   13 43   6 15     5  21252      974   51 99  4933   61 73  59 07   74   64   1227   4 93      6  26 60896  9 81   49 19   46 43   59 00   5624   74   64   15 00   7 76      REMARKS  The emission levels of other frequencies were very low against the limit                Trace       QP Limit       SEHE    HN An   uk db toa MA D I                            NIIT T  LEUR E EHI  Tre ER          No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China    Tel   86 755 8600 0151  Fax   86 755 8600 0159    Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch             Page 19 of 66 Report Version 1       Report No   RM121207N012 1    3 3 RADIATED EMISSION MEASUREMENT  3 3 1 LIMITS OF RADIATED EMISSION MEASUREMENT    TEST STANDARD  EN 55022  FOR FREQUENCY BELOW 1000 MHz    FREQUENCY Class B  at 3m  C
16.  This report sets forth our findings solely with respect to the test samples identified herein  The results  set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or  identical product unless specifically and expressly noted  Our report includes all of the tests requested by you and the results thereof based upon the  information that you provided to us  You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our  negligence  provided  however  that such notice shall be in writing and shall specifically address the issue you wish to raise  A failure to raise such issue  within the prescribed time shall constitute your unqualified acceptance of the completeness of this report  the tests conducted and the correctness of the  report contents  Unless specific mention  the uncertainty of measurement has been explicitly taken into account to declare the compliance or  non compliance to the specification                   No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 769 8593 5656  Town  Dongguan City  Fax   86 769 8593 1080  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 1 on 66 Report Version 1     amp U VE    Report No   RM121207N012 1  Table of Contents   RELEASE CONTROL                                                        
17.  aluminum at least 0 25mm thick  and 2 5 meters square  connected to the protective grounding system  A Horizontal Coupling Plane  1 6m x 0 8m  was placed  on the table and attached to the GRP by means of a cable with 940kO total impedance  The  equipment under test  was installed in a representative system as described in section 7 of EN  61000 4 2 and its cables were placed on the HCP and isolated by an insulating support of 0 5mm  thickness  A distance of 1 meter minimum was provided between the EUT and the walls of the  laboratory and any other metallic structure     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 38 of 66 Report Version 1       Report No   RM121207N012 1    4 2 6 TEST RESULTS                itti V From A  TEST MODE RJ45 Port Data Transmitting TEST VOLTAGE DC 5V From Adapter   100Mbps More than 10   Input AC230V 50Hz  ENVIRONMENTAL   23 2deg  C  42 2  RH   CONDITIONS 100 2Kpa TESTED BY  Eric                Direct Discharge Application       2 Test Result of Test Result of  Test Level  kV    Polarity Test Point Contact Discharge  AIR Discharge    Indirect Discharge Application    Discharge Level       Test Result of Test Result of  Test P              VCP          NOTE  A  There was no change compared with initial operation during the test     No  34  Che
18.  coupling  Test levels below  the ignition point of the coupling arrestor was not specified  The interconnection  line between the EUT and the coupling decoupling networks was shorter than 2  meters in length     4 5 4 DEVIATION FROM TEST STANDARD  No deviation     4 5 5 TEST SETUP    Combination    Wave Generator  Coupling  amp   DecouplingNetwork L lt 2m       No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151    Bureau Veritas Shenzhen Co   Ltd     Dongguan Branch Town  Dongguan City  Fax   86 755 8600 0159    Guangdong 523942  China Email  customerservice dg cn bureauveritas com       Page 48 of 66 Report Version 1       BUREAU    Report No   RM121207N012 1    4 5 6 TEST RESULTS                   RJ45 Port Data Transmitting DC 5V From Adapter  TEST MODE TEST VOLTAGE   100Mbps More than 10   Input AC230V 50Hz  ENVIRONMENTAL  CONDITIONS 22 1deg  C  54 7  RH TESTED BY  Xuehui             AC DC Power port      Phase angle   Test result  Woltage  kV    Test point Polarity                Test Point   Polarity   Test result                      NOTE  A  There was no change compared with initial operation during the test    No  34  Chenwulu Section  Guantai Rd   Houjie  Bureau Veritas Shenzhen Co   Ltd  iss   i    i mt  Town  Dongguan City   Dongguan Branch    Guangdong 523942  China    Tel   86 755 8600 0151  Fax   86 755 8600 0159    Email  customerservice dg cn bureauveritas com       Page 49 of 66 Report Version 1     amp U VE    BURA  Sul    1828    Repor
19. 0159  Page 43 of 66    Email  customerservice dg cn bureauveritas com       Report Version 1     amp U VE    B  URS  Sul    1828    Report No   RM121207N012 1    4 4 ELECTRICAL FAST TRANSIENT  EFT   4 4 1 TEST SPECIFICATION    Basic Standard  EN 61000 4 4  Test Voltage  Power line  1 kV  Polarity  Positive  amp  Negative  Impulse Frequency  5 kHz  Impulse Waveshape  5 50 ns  Burst Duration  15 ms  Burst Period  300 ms  Test Duration  1 min     4 4 2 TEST INSTRUMENT      Equipment      Manufacturer  Model No    Serial No    LastCal    Next Cal     EFT Tester HAEFELY PEFT4010 150546 May 15 12   May 14 13  EFT Coupling Clamp  HAEFELY IP4A 150407 May 15 12   May 14 13       NOTE  1  The test was performed in EMS Room 2  2  The calibration interval of the above test instruments is 12 months and the  calibrations are traceable to CEPREI CHINA and NIM CHINA    4 4 58 TEST PROCEDURE  a  Both positive and negative polarity discharges were applied     b  Thelength of the  hot wire  from the coaxial output of the EFT generator to the  terminals on the EUT should not exceed 0 5 meter   0 05 meter     The duration time of each test sequential was 1 minute     o    d  The transient burst waveform was in accordance with EN 61000 4 4  5 50ns     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Page 44 of 66 Report Version 1    Bureau Veritas Shenzhen C
20. 1       Report No   RM121207N012 1    6 APPENDIX A   MODIFICATIONS RECORDERS FOR ENGINEERING  CHANGES TO THE EUT BY THE LAB    No any modifications were made to the EUT by the lab during the test                    No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 66 of 66 Report Version 1    
21. 1  Emission level dBuV m  Raw Value dBuV    Correction Factor dB m   2  Correction Factor dB m    Antenna Factor  dB m    Cable Factor  dB   3  The other emission levels were very low against the limit   4  Margin value   Emission level     Limit value   5  All the readings were Quasi Peak values   Level   dBuV   80   70   60    50  4    n                         0   1 1 1 1 1 1 1 1 1 1  30 100 200 300 400 500 600 700 800 900 1000  Frequency  MHz     Tel   86 755 8600 0151  Fax   86 755 8600 0159  Email  customerservice dg cn bureauveritas com    No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China    Page 25 of 66    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch             Report Version 1       Report No   RM121207N012 1    3 3 7 TEST RESULTS  ABOVE 1GHz                          RJ45 Port Data Transmittin  TEST MODE 7            1 2 GHz   100Mbps More than 10   G  n DETECTOR  rom apter  TEST VOLTAGE p FUNCTION  amp  Peak Average   Input AC230V 50Hz RESOLUTION 1 MHz  BANDWIDTH  FNVIRONMENTAL 21deg  C  52  RH TESTED BY  Yugiang Yin    CONDITIONS       ANTENNA POLARITY  amp  TEST DISTANCE  HORIZONTAL AT 3M    EMISSION ANTENNA TABLE RAW CORRECTION  fons LEVEL rm on HEIGHT ANGLE VALUE FACTOR   dBuV m   Degree   dBuV   dB m     700         002 33   a80Av     e   ron   zm 2s      ANTENNA POLARITY  amp  TEST DISTANCE  VERTICAL AT 3 M    EMISSION ANTENNA  fone LEVEL   PM HEIGHT FACTOR   dBuV m   dB m     Fe   397535     67     540    REM
22. 121207N012 1    VERITAS    3 4 2 TEST INSTRUMENTS                               DESCRIPTION  amp    MANUFACTU CALIBRATED   CALIBRATED  MANUFACTURER RER MODERO Se ORTE UNTIL  5kVA AC Power Source 2    5001ix 400 55194        23 12   May 22 13  a      ee   RAC 72134   May 24 12   May 23 13  Test Software 2  A 23                               NOTE  1  The test was performed      EMS Room 1     2 The calibration interval of the above test instruments is 12 months  and the calibrations are  traceable to CEPREI CHINA and NIM CHINA    3 4 3 TEST PROCEDURE    a  The EUT was placed on the top of a wooden table 0 8 meters above the ground  and operated to produce the maximum harmonic components under normal  operating conditions for each successive harmonic component in turn     b  The classification of EUT is according to section 5 of EN 61000 3 2   The EUT is classified as follows     Class A  Balanced three phase equipment  Household appliances excluding  equipment as Class D  Tools excluding portable tools  Dimmers for  incandescent lamps  audio equipment  equipment not specified in one  of the three other classes     Class B     equipment     Class C   Class D     Lighting equipment     Portable tools  Arc welding equipment which is not professional    Equipment having a specified power less than or equal to 600 W of the    following types  Personal computers  personal computer monitors and  TV receivers     c  The correspondent test program of test instrument to measure the curre
23. ARKS  The other emission levels were very low against the limit        No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 26 of 66 Report Version 1       Report No   RM121207N012 1    3 4 HARMONICS CURRENT MEASUREMENT  3 4 4 LIMITS OF HARMONICS CURRENT MEASUREMENT    TEST STANDARD  EN 61000 3 2    Limits for Class A equipment Limits for Class D equipment    Harmonics   Max  permissible Harmonics Max  permissible Max  permissible  harmonics current Order harmonics current per harmonics current  n watt mA W A    n A  Odd harmonics Odd Harmonics only    707 po do         0 30 0 21  3  0     o  o4 CHE                         2       NOTE  1 Class    and Class D        classified according to item section 5 of EN 61000 3 2     2 According to section 7 of EN 61000 3 2  the above limits for all equipment except for  lighting equipment having an active input power  gt  75 W and no limits apply for equipment  with an active input power up to and including 75 W     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 27 of 66 Report Version 1    KU VE    B  URS  Sul    1828    Report No   RM
24. PEGIEIGATION    certet tie rtt rer rh dtc tn eta      44  442  TESTINSTBHUMENT  iiti einen 44  443  TESTPROGEDURE    irre er e ttn eite ris de eek PR eeu vd 44  444 DEVIATION FROM TEST STANDARD                 eee           45  AAD TEST SETUP  iie etie ivit ae een 45  4 46  TESTHBRESUEIS tato den ae Irt DER Rm T UH d RE  46  45  SURGE IMMUNIDY iter o rt tee aaa eee dt ae nee a 47  4 5 1 TEST SPEGIFICATION iix eae Per              pen babet Deb                 47  452 TEST INSTRUMENT    trt itt            ee 47  4 5 3    TEST PROGEDURE     a4 rdiet                                                    48  454 DEVIATION FROM TEST 5                                                  48  455     TESI SETUP Erro rp doe ELO DG edid Das rete errr eet 48  45 6  TEST RESULTS    unse 49  4 6 CONDUCTED RADIO FREQUENCY DISTURBANCES                                                       49  4 6 1 TEST                                         ee ae ae      50  4 6 2  TESIINSTRUMENT      en                     tts 50  463 TEST  PROGEDURE     u  naeh 51  4 6 4   DEVIATION FROM TEST STANDARD                  eene nennen 51  4 6 5     TEST SETUP                             ae nee un            52  466 TESTRESULI S cmd      ee Kenner                                 53  47   VOLTAGE DIP SHORT INTERRUPTIONS VOLTAGE VARIATIONS  DIP                              53  IMMUNITY TEST    tari istoc Eo ue ne ANS I ME EI 54  4 7 1                                  ict tti rented ret et epu to ined ruv keen        
25. TERMINAL              No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  custor       Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch    Page 62 of 66 Report Version 1       Report No   RM121207N012 1    EFT TEST  TELECOMMUNICATION PORT              SURGE TEST  MAINS TERMINAL              No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  cus    Page 63 of 66 Report Version 1       Report No   RM121207N012 1    SURGE TEST  TELECOMMUNICATION PORT                 CONDUCTED SUSCEPTIBILITY TEST  MAINS TERMINAL           No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151    Bureau Veritas Shenzhen Co   Ltd     Dongguan Branch Town  Dongguan City  Fax   86 755 8600 0159    Guangdong 523942  China Email  customerservice dg cn bureauveritas com          Page 64 of 66 Report Version 1       Report No   RM121207N012 1    CONDUCTED SUSCEPTIBILITY TEST  TELECOMMUNICATION PORT                 VOLTAGE DIPS AND INTERRUPTIONS TEST                No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151    Bureau Veritas Shenzhen Co   Ltd     Dongguan Branch Town  Dongguan City  Fax   86 755 8600 0159    Guangdong 523942  China Email  customerservice dg cn bureauveritas com       Page 65 of 66 Report Version 
26. al Ground  Reference Plane    Note  1 Support units were connected to second LISN   2 Both of LISNs  AMN  are 80 cm from EUT and at least 80 cm  from other units and other metal planes    3 1 6 EUT OPERATING CONDITIONS  a  Turned on the power of all equipment   b  EUT inthe transfer rate more than 10  of the state test  c  EUT was operated according to the type used was description in  manufacturer s specifications or the user s manual     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 12 of 66 Report Version 1    nu VE    B  URS  Sul    1828    Report No   RM121207N012 1    VERITAS    3 1 7  TEST RESULTS                         RJ45 Port Data Transmitting  TEST MODE 6DB BANDWIDTH 9 kHz   100Mbps More than 10    DC 5V From Adapter  TEST VOLTAGE PHASE Line  L   Input AC230V 50Hz  ENVIRONMENTAL  CONDITIONS 17deg  C  50  RH TESTED BY Bin          Corr   Reading Value Emission Limit  Level  Factor         24 13    4   5 00000   9 99   36 49   18 74   46 48   28 73  37 77    6   1000016   10 06   329   19 71   42 96   29 77       REMARKS         emission levels of other frequencies were very low against the limit                 100        90     80        Bureau Veritas Shenzhen Co   Ltd     Dongguan Branch    nii          naL LH SE    Me E pol   JM Mt      Paz  n n  nn    PK T
27. ata or user  transmissions  programmable functions   May show loss of function  one or Functions shall be self recoverable   more   Shall operate as intended after  May show degradation of recovering   performance  see note 1   Shall be no degradation of performance  No unintentional transmissions   see note 2    Shall be no loss of stored data or user  programmable functions     May be loss of function  one or more    Functions shall be recoverable by the  operator   C Shall operate as intended after  recovering   Shall be no degradation of performance     see note 2     NOTE 1  Degradation of performance during the test is understood as a degradation to a level not  below a minimum performance level specified by the manufacturer for the use of the  apparatus as intended  In some cases the specified minimum performance level may be  replaced by a permissible degradation of performance    If the minimum performance level or the permissible performance degradation is not  specified by the manufacturer then either of these may be derived from the product  description and documentation  including leaflets and advertising  and what the user may  reasonably expect from the apparatus if used as intended    No degradation of performance after the test is understood as no degradation below a  minimum performance level specified by the manufacturer for the use of the apparatus as  intended  In some cases the specified minimum performance level may be replaced by a  permissible degrada
28. ax   86 755 8600 0159  Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Report Version 1       Report No   RM121207N012 1    3 5 4 DEVIATION FROM TEST STANDARD    No deviation     3 5 5 TEST SETUP       For the actual test configuration  please refer to the related item     Photographs of the  Test Configuration     3 5 6 EUT OPERATING CONDITIONS    Same as item 3 1 6     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Page 31 of 66 Report Version 1    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch          Report No   RM121207N012 1    VERITAS    3 5 7 TEST RESULTS                      RJ45 Port Data Transmitting  TEST MODE   100Mbps More than 10    FUNDAMENTAL BSERVATION    229 68Vrms ki 10 minutes  VOLTAGE PERIOD  Tp   ENVIRONMENTAL  21 5deg  C  51 8  RH  TESTED BY Xuehui  CONDITIONS                   Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch    No  34  Chenwulu Section  Guantai Rd   Houjie     1  P4 means short term flicker indicator     2        means maximum time that d t  exceeds 3 3    3   dmax means maximum relative voltage change    4       means relative steady state voltage change     Town  Dongguan City   Guangdong 523942  China    Page 32 of 66    Tel   86 755 8600 0151  Fax   86 755 8600 0159    Email  customerservice dg cn bureauveritas com       Rep
29. ber    Signal Amplifier 8447D 2944A10488   May 2 12   May 2 13  RF Cable IMRO IMRO 400   966 Cable 1    May 2 12   May 2 13    ADT_Radiate    NOTE  1  The calibration interval of the above test instruments is 12 months  And the calibrations  are traceable to CEPREI CHINA and NIM CHINA   2  The test was performed in Chamber 966        FOR FREQUENCY ABOVE 1GHz      Equipment   Manufacturer             No    Serial No    LastCal    Next Cal                8449   3008400409          31 12   May 30 13    ee EMCI EMC 184045 980102 Nov  04 12   Nov  03 13  en  or PR e  om  om    NOTE  1  The calibration interval of the above test instruments is 12 months  And the calibrations are  traceable to CEPREI CHINA and NIM CHINA        2  The test was performed in 10m Chamber     3  The horn antenna are used only for the measurement of emission frequency above 1GHz if  tested     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 21 of 66 Report Version 1       Report No   RM121207N012 1    3 3 3 TEST PROCEDURE     lt Frequency Range below 1GHz gt     a  The EUT was placed on the top of a rotating table 0 8 meters above the ground  In a 3 meter Semi anechoic chamber room  The table was rotated 360 degrees  to determine the position of the highest radiation     b  The EUT was set 3 meters away 
30. duration with a  sequence of 3 dips interruptions with intervals of 10s minimum  between each test  event   Each representative mode of operation shall be tested  Abrupt changes in  supply voltage shall occur at zero crossings of the voltage waveform          No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Bureau Veritas Shenzhen Co   Ltd     Town  Dongguan City  Fax   86 755 8600 0159  Dongguan Branch      Guangdong 523942  China Email  customerservice dg cn bureauveritas com  Page 54 of 66    Report Version 1       Report No   RM121207N012 1    4 7 4 DEVIATION FROM TEST STANDARD    No deviation     4 7 5 TEST SETUP    Voltage  Dips  Generator       For the actual test configuration  please refer to the related item     Photographs of the  Test Configuration     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 55 of 66 Report Version 1     amp U VE    B  URS  SYL    1828    Report No   RM121207N012 1    4 7 6 TEST RESULTS             RJ45 Port Data Transmitting DC 5V From Adapter  TEST MODE TEST VOLTAGE   100Mbps More than 10   In AC230V 50Hz  IRONMENTAL  iis 23 1deg  C  54 6  RH TESTED BY  Xuehui Wen  CONDITIONS                   Es 2100 Nano He Event interval Total events           Voltage dips      period   sec   time     Ut  _230 Vac 50 Hz Event i
31. e   Tel   86 755 8600 0151  Bureau Veritas Shenzhen Co   Ltd     Town  Dongguan City  Fax   86 755 8600 0159  Dongguan Branch       Guangdong 523942  China Email  customerservice dg cn bureauveritas com       Page 7 of 66 Report Version 1    BUT  SYL    Report No   RM121207N012 1    2 GENERAL INFORMATION  2 1 GENERAL DESCRIPTION OF EUT    MODULATION TYPE CCK  DQPSK  DBPSK for DSSS  64QAM  16QAM  QPSK  BPSK for OFDM       bremen  2 rar anna    NOTE        1  Fora more detailed features description  please refer to the manufacturer s specifications  or the user s manual    2  The EUT was powered by the following adapter     DAPTER    BRAND   N A    100 240VAC 50 60HZ 0 15A       3  Forthe test results  the EUT had been tested with all conditions  But only the worst case was  shown in test report     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 8 of 66 Report Version 1       1828    Report No   RM121207N012 1    2 2 DESCRIPTION OF TEST MODE      FOR CONDUCTED EMISSION TEST AT MAINS TERMINAL       Test Mode    Test Voltage       RJ45 Port Data Transmitting   10Mbps More than 10      DC5V From Adapter Input       RJ45 Port Data Transmitting         FOR CONDUCTED EMISSION TEST AT TELECOMMUNICATION PORT    Test Mode    AC230V 50Hz        100Mbps More than 10      Test Voltage   
32. e calibration interval of the above test instruments is 12 months and the  calibrations are traceable to CEPREI CHINA and NIM CHINA    No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 36 of 66 Report Version 1       Report No   RM121207N012 1    4 2 3 TEST PROCEDURE    a  Electrostatic discharges were applied only to those points and surfaces of the  EUT that are accessible to users during normal operation     b  The test was performed with at least ten single discharges on the pre selected  points in the most sensitive polarity         The time interval between two successive single discharges was at least 1  second     d  The ESD generator was held perpendicularly to the surface to which the  discharge was applied and the return cable was at least 0 2 meters from the  EUT     e  Contact discharges were applied to the non insulating coating  with the pointed  tip of the generator penetrating the coating and contacting the conducting  substrate     f  Air discharges were applied with the round discharge tip of the discharge  electrode approaching the EUT as fast as possible  without causing mechanical  damage  to touch the EUT  After each discharge  the ESD generator was  removed from the EUT and re triggered for a new single discharge  The test was  repeated until all discha
33. ed Line we Test Result Remark  Note   MHz   RJ45 Port  3 0 1580 MHz   Clamp A Pass   network line                 Note   Tested Israel SII Frequencies 0 2 0 53 1 1 5 7 1 13 56 21 27 12 40 68 65 68 MHz  NOTE  A  There was no change compared with initial operation during the test     Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch    No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China    Page 53 of 66    Tel   86 755 8600 0151  Fax   86 755 8600 0159  Email  customerservice dg cn bureauveritas com       Report Version 1       Report No   RM121207N012 1    4 7 VOLTAGE DIP SHORT INTERRUPTIONS VOLTAGE VARIATIONS  DIP   IMMUNITY TEST    4 7 1 TEST SPECIFICATION    Basic Standard  EN 61000 4 11  Test Levels  Voltage Dips   i  0  residual for 0 5 cycle  ii  0  residual for 1 cycle  ii  7096 residual for 25 cycle  Voltage Interruptions   i  0  residual for 250 cycle    Test Duration Time  3 test events in sequence  Interval between Event  10 seconds  Phase Angle  0   180      4 7 2 TEST INSTRUMENT      Equipment  Manufacturer  Model No    Serial No    LastCal    Next Cal   DIPS Tester   HAEFELY   PLINE1610   150370   May23 12   May 22 13                    R     NOTE  1  The test was performed      EMS Room 1     2  The calibration interval of the above test instruments is 12 months and the  calibrations are traceable to CEPREI CHINA and NIM CHINA    4 7 3 TEST PROCEDURE    The EUT was tested for each selected combination of test levels and 
34. ens 54  47 2 TESTINSTRUMENT i rar Pa        ma ibas dete PER      54  43  TEST PROCEDURE                                                                           ine 54  4 7 4   DEVIATION FROM TEST 5                                     55  4 75    TEST SETUP    eir tete De teet eco ai Pet neo a eru dk Pure          ER ve va 55  4 56  TEST RESULTS                 to bigis aui indi ue               56   5 PHOTOGRAPHS OF EUT AND THE TEST CONFIGURATION                                                     57    6 APPENDIX A     MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT  BY THE                                                  66       No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Bureau Veritas Shenzhen Co   Ltd     Dongguan Branch Town  Dongguan City  Fax   86 755 8600 0159  a9 Guangdong 523942  China Email  customerservice da cn bureauveritas com    Page 3 of 66 Report Version 1       Report No   RM121207N012 1          RELEASE CONTROL RECORD  ISSUE NO  REASON FOR CHANGE DATE ISSUED  RM121207N012 1 Original release Jan  17  2013                   No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 4 of 66 Report Version 1     amp U VE    B  URS  Sui    1828    Report No   RM121207N012 1    1 SUMMARY OF TEST RESULTS    After estimating all t
35. from the interference receiving antenna  which  was mounted on the top of a variable height antenna tower     c  The height of antenna is varied from one meter to four meters above the ground  to determine the maximum value of the field strength  Both horizontal and vertical  polarizations of the antenna are set to make the measurement     d  For each suspected emission  the EUT was arranged to its worst case and then  the antenna was tuned to heights from 1 meter to 4 meters and the turn table  was turned from 0 degrees to 360 degrees to find the maximum reading     e         test receiver system was set to quasi peak detect function and specified  bandwidth with maximum hold mode when the test frequency is below 1 GHz     NOTE  The resolution bandwidth of test receiver spectrum analyzer is 120kHz for Quasi peak  detection  QP  at frequency below 1GHz       Frequency Range above 1GHz gt     a  The EUT was placed on the top of a rotating table 0 8 meters above the  ground at a 10 meter Semi anechoic chamber room  The table was rotated  360 degrees to determine the position of the highest radiation     b  The EUT was set 3 meters away from the interference receiving antenna   which was mounted on the top of a variable height antenna tower     c  The height of antenna can be varied from one meter to four meters  the  height of adjustment depends on the EUT height and the antenna 3dB  beamwidth both  to detect the maximum value of the field strength  Both  horizontal and vertica
36. he combination of every test mode  the result shown as below is  the worst case     The EUT has been tested according to the following specifications     Standard    TestTpe   Result     Remarks    Minimum passing margin is  wonducted  Test PASS    8 474   at 1 59000MHz    Conducted Test PASS Minimum passing margin is    4 93dB at 23 12832MHz      Meets Limits Minimum  EN 55022 2010 Radiated Test        30MHz 1GHz  PASS  passing margin is     Telecom Port      1 25dB at 312 48MHz    Meets Limits Minimum  Radiated Test   1GHz 6GHz  PASS  passing margin is    6 1dB at 3892 33MHz  EN 61000 3 2 2006      l   A1 2009 A2 2009 PASS  Meets the requirements  EN 61000 3 3 2008  Voltage fluctuations  amp  flicker  PASS  Meets the requirements         No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151   Bureau Veritas Shenzhen Co   Ltd     Town  Dongguan City  Fax   86 755 8600 0159   Dongguan Branch            Guangdong 523942  China Email  customerservice dg cn bureauveritas com       Page 5 of 66 Report Version 1     amp U VE    B  URS  Sui    1828    Report        RM121207N012 1    IMMUNITY    Standard Test Type  Result  Remarks      EN 61000 4 2 2009 Electrostatic discharge PASS Meets the requirements of    immunity test Performance Criterion A    EN 61000 4 3 2006              nn PASS Meets the requirements of   A1   A2 2010      9 Performance Criterion A  immunity test    EN 61000 4 4 2004  Electrical fast transient   burst PASS Meets the requirements of     A1
37. her emission levels were very low against the limit   4  Margin value   Emission level     Limit value   5  All the readings were Quasi Peak values   Level   dBuV   80   70   60   4  5 6  50   an i              07    1 1 1 1 1 1 1 1 1  30 100 200 300 400 500 600 700 800 900 1000  Frequency  MHz     Bureau Veritas Shenzhen Co   Ltd     Town  Dongguan City   Dongguan Branch w 99      Guangdong 523942  China       Page 24 of 66    No  34  Chenwulu Section  Guantai Rd   Houjie    Tel   86 755 8600 0151  Fax   86 755 8600 0159  Email  customerservice dg cn bureauveritas com          Report Version 1     amp U VE    B  URS  Sul    1828    Report No   RM121207N012 1    RJ45 Port Data Transmitting  TEST MODE   100Mbps More than 10      DC 5V From Adapter  Input AC230V 50Hz    FREQUENCY    RANGE    DETECTOR  FUNCTION  amp   RESOLUTION  BANDWIDTH    TESTED BY  Robert    Quasi Peak   120kHz    TEST VOLTAGE       ENVIRONMENTAL    CONDITIONS 21deg  C  5296 RH             ANTENNA POLARITY  amp  TEST DISTANCE  VERTICAL AT 3M                                                          Correction  Raw   Emission M     Antenna Table  No  a Factor Value Level        jeu Height Angle   dB m     dBuV    dBuV m   cm   Degree   1 121 18 12 93 21 54 34 47 40  5 53 100 118  2 138 64 12 98 20 95 33 93 40  6 07 100 152  3 174 68 11 22 22 10 33 32 40  6 68 100 360  4 252 68 14 44 25 30 39 74 47  7 26 100 226  5 468 44 20 86 19 54 40 40 47  6 60 100 83  6 503 36 21 41 17 68 39 09 47  7 91 100 211  REMARKS  
38. l polarizations of the antenna are set to make the  measurement     d  For each suspected emission  the EUT was arranged to its worst case and  then the antenna was tuned to heights and the rotatable table was turned  from 0 degrees to 360 degrees to find the maximum reading     e  The test receiver system was set to quasi peak detect function and specified  bandwidth with maximum hold mode when the test frequency is below 1 GHz     NOTE    1  The resolution bandwidth is 1MHz and video bandwidth of test receiver spectrum analyzer is  3MHz for Peak detection at frequency above 1GHz  The resolution bandwidth of test  receiver spectrum analyzer is 1 MHz for Average detection  AV  at frequency above 1 GHz     2  For measurement of frequency above 1000 MHz  the EUT was set 3 meters away from the  receiver antenna     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 22 of 66 Report Version 1    Uv  UV ES    B  URS              1828    Report        RM121207N012 1    3 3 4 DEVIATION FROM TEST STANDARD  No deviation    3 3 5 TEST SETUP    Frequency Range below 1GHz gt     Ant  Tower 1 4m    Variable  3m  EUT amp       Support Units        s Table       Ground Plane    Test Receiver    s  0000                lt Frequency Range above 1GHz gt     Ant  Tower    1 4m  N Variable  EUT amp 
39. lass B  at 10m    MHz  dBuV m dBuV m    30   230  230   1000       FREQUENCY RANGE OF RADIATED MEASUREMENT   For unintentional radiators     Highest frequency generated or  Upper frequency of measurement             used in the device or on which the Range  MHz   device operates or tunes  MHz   Below 108 1000  108 500 2000  500     1000 5000       Up to 5 times of the highest frequency or  6 GHz  whichever is less    Above 1000             FOR FREQUENCY ABOVE 1000 MHz    Class A  dBuV m   at 3m    Class B  dBuV m   at 3m   FREQUENCY  GHz  Cole Nally  at 2m   dBuV m   at 3m   AVERAGE              AVERAGE  n    86   74   5          3 to 6       NOTE   1  The lower limit shall apply at the transition frequencies    2  Emission level  dBuV m    20 log Emission level  uV m     3  All emanation from a class A B digital device or system  including  any network of conductors and apparatus connected thereto  shall not  exceed the level of field strengths specified above     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 20 of 66 Report Version 1       Report No   RM121207N012 1    3 3 2 TEST INSTRUMENTS    FOR FREQUENCY BELOW 1GHz      Equipment   Manufacturer   Model No    Serial No    Last Cal    Next Cal       3m Semi anechoic   erc   NDGREN NSEMC003  Mar  24 12  Mar  23 13  Cham
40. lu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com       Page 33 of 66 Report Version 1       Report No   RM121207N012 1    4 1 1 GENERAL PERFORMANCE CRITERIA DESCRIPTION    The Requirement of Performance Criteria  1 Performance criteria for continuous Criterion A of the applicable class shall  phenomena applied to transmitters  CT       apply  2 Performance criteria for transient Criterion B of the applicable class shall  phenomena applied to transmitters  TT                 phenomena applied to receivers  CR appl  Performance criteria for transient  phenomena applied to receivers  TR  apply       No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 34 of 66 Report Version 1       Report No   RM121207N012 1    The phenomena allowed during and after test in each criterion are clearly stated in  the following table   Performance criteria      Criteria    Duingtest   Aftertest          Shall operate as intended  Shall operate as intended   May show degradation of Shall be no degradation of performance  A performance  see         1    see note 2    Shall be no loss of function  Shall be no loss of function   Shall be no unintentional Shall be no loss of stored d
41. ndicator   Plt means long term flicker indicator   500 Tdt means maximum time that dt exceeds 3 3 96     max means maximum relative voltage change     3 5 2 TEST INSTRUMENTS       c means relative steady state voltage change                               DESCRIPTION  amp  MANUFACTU CALIBRATED   CALIBRATED  MODEL        SERIAL        MANUFACTURER RER 9        9 DATE UNTIL  5kVA AC Power Source     California   s001ix 400 55194        23 12   May 22 13  nstruments  Harmonic Flicker Test California PACS 1 72134 May 24 12 May 23 13  System Instruments  California CTS 3 0    Test Software Instruments V3 2 0 16 NA dd NA             NOTE  1  The test was performed in EMS Room 1     2 The calibration interval of the above test instruments is 12 months  and the calibrations are  traceable to CEPREI CHINA and NIM CHINA    3 5 3 TEST PROCEDURE    a  The EUT was placed on the top of a wooden table 0 8 meters above the ground  and operated to produce the most unfavorable sequence of voltage changes  under normal operating conditions    b  During the flick measurement  the measure time shall include that part of whole    operation cycle in which the EUT produce the most unfavorable sequence of  voltage changes  The observation period for short term flicker indicator is 10  minutes and the observation period for long term flicker indicator is 2 hours     No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China    Page 30 of 66    Tel   86 755 8600 0151  F
42. nt    harmonics emanated from EUT is chosen  The measure time shall be not less  than the time necessary for the EUT to be exercised     Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch    No  34  Chenwulu Section  Guantai Rd   Houjie    Town  Dongguan City   Guangdong 523942  China    Page 28 of 66    Tel   86 755 8600 0151  Fax   86 755 8600 0159    Email  customerservice dg cn bureauveritas com       Report Version 1       Report No   RM121207N012 1    3 4 4 DEVIATION FROM TEST STANDARD    No deviation     3 4 5 TEST SETUP       3 4 6 EUT OPERATING CONDITIONS    Same as item 3 1 6    3 4 7 TEST RESULTS    The limits are not specified for equipment with a rated power of 75W or less  other  than lighting equipment  The EUT is not required to meet this test item as its power  consumption is lower than 75W     For further details  please refer to Clause 7 of EN 61000 3 2 2006   A1 2009    A2 2009     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 29 of 66 Report Version 1    BUT    BUREAU  VERITAS    Uv  COVEY                1828    Report        RM121207N012 1    3 5 VOLTAGE FLUCTUATION AND FLICKS MEASUREMENT    3 5 1 LIMITS OF VOLTAGE FLUCTUATION AND FLICKS MEASUREMENT    TEST STANDARD  EN 61000 3 3    Testiem   Limit           dmax  96     Pst means short term flicker i
43. nterval Total events Test result  Voltage dips      period   sec   time        NOTE  A  There was no change compared with initial operation during the test   B  Data transmitting paused for a little while  but could self recover after    the test   No  34  Ch   ion  i Rd   Houji Tel   86 755 8600 0151  Bureau Veritas Shenzhen Co   Ltd  boss                 section            Ra                 Town  Dongguan City  Fax   86 755 8600 0159  Dongguan Branch       a  Guangdong 523942  China Email  customerservice dg cn bureauveritas com       Page 56 of 66 Report Version 1       Report No   RM121207N012 1    5 PHOTOGRAPHS OF THE TEST CONFIGURATION    Bureau Veritas Shenzhen Co   Ltd     Dongguan Branch    CONDUCTED EMISSION TEST MAINS TERMINAL         121207N012                      Tel   86 755 8600 0151  Fax   86 755 8600 0159    No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China          Email  customerservice dg cn bureauveritas com       Page 57 of 66    Report Version 1       Report No   RM121207N012 1    CONDUCTED EMISSION TEST TELECOMMUNICATION PORT                 No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 58 of 66 Report Version 1       Report No   RM121207N012 1    RADIATED EMISSION TEST    30MHz  1GHz                     
44. nwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 39 of 66 Report Version 1     amp U VE    BURA  Sul    1828    Report No   RM121207N012 1    4 3 RADIATED  RADIO FREQUENCY  ELECTROMAGNETIC FIELD IMMUNITY  TEST  RS     4 3 1 TEST SPECIFICATION    Basic Standard  EN 61000 4 3  Frequency Range  80 MHz   1000 MHz  1400 MHz   2700 MHz  Field Strength  3 V m  Modulation  1 kHz Sine Wave  80   AM Modulation  Frequency Step  1   of preceding frequency value  Polarity of Antenna  Horizontal and Vertical  Antenna Height  1 5 m  Dwell Time  3 seconds    4 3 2 TEST INSTRUMENT      Equipment   Manufacturer   Model No    Serial No    Last Cal    Next Cal     Signal Generator  Agilent N5181A MY50142530          02 12  Nov  01 13  ntenna Log Periodic  CORAD ATR80M6G 0337307 Dec  28 12  Dec  27 13  D    S  A  A  S    e    Dual Directional TESEQ C5982 95208 Dec  28 12  Dec  27 13  Coupler  Dual Directional TESEQ C6187 95175 Dec  28 12  Dec  27 13  Coupler  Dual Directional TESEQ CPH 274F M251304 01       28 12 Dec  27 13    BVADT RS V7     NOTE  1  The test was performed in RS chamber   2  The calibration interval of the above test instruments is 12 months and the calibrations  are traceable to CEPREI CHINA and NIM CHINA     ntenna Log Periodic  CORAD ATS700M11G 10336821 Dec  28 12 c  27 13       No  34 
45. o   Ltd   Dongguan Branch          Report No   RM121207N012 1    4 4 4 DEVIATION FROM TEST STANDARD    No deviation     4 4 5 TEST SETUP                    generator  Coupling  In  utating  decaaplirvg support EFTE  Grounding connection according te  raten           manufacturers specification   Length to be specilied in the test plan   Ground reterenon plane    TABLETOP EQUIPMENT   The configuration consisted of a wooden table standing on the Ground Reference Plane and should  be located 0 1m      0 01m above the Ground Reference Plane    The GRP consisted of a sheet of aluminum a least 0 25mm thick and 2 5m square  connected to the  protective grounding system  A minimum distance of 0 5m was provided between the EUT and the  walls of the laboratory or any other metallic structure     FLOOR STANDING EQUIPMENT   The EUT installed in a representative system as described in section 7 of IEC 61000 4 4 and its  cables  were isolated from the Ground Reference Plane by an insulating support that is 0 1 meter  thick  The GRP consisted of a sheet of aluminum  at least 0 25mm thick and 2 5m square  connected  to the protective grounding system     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 45 of 66 Report Version 1     amp U VE    BUR  07594    1828    Report No   RM121207N012 1
46. o the power mains through  another LISN    b  Voltage    the measurement port of the ISN was detected  the reading was  corrected by adding the voltage division factor of the ISN  and was compared to  the voltage limits    C  The disturbance levels and the frequencies of at least six highest disturbances  were recorded from each telecommunication port  which comprises the EUT     For Current Probe   a  Current probe shall be placed at 0 1m from the ISN     b  Current at the measurement port of the ISN was detected  the reading was  corrected by adding the current division factor of the current probe  and was  compared to the current limits     C  The disturbance levels and the frequencies of at least six highest disturbances  were recorded from each telecommunication port  which comprises the EUT    d  Break the insulation and connect a 1500 resistor from the outside surface of  the shield to ground and apply a clamp between 1500 connection and  associated equipment  For STP LAN only      For Voltage Probe     a  The EUT was placed 0 4 meters from the conducting wall of the shielded room  and connected to the power mains through a line impedance stabilization  network  LISN   Other support units were connected to the power mains  through another LISN     b  Voltage at the measurement port of the voltage probe was detected  the reading  was corrected by adding the voltage division factor of the voltage probe  and  was compared to the voltage limits     c  The disturbance level
47. ographs of the  Test Configuration     NOTE    TABLETOP EQUIPMENT   The EUT installed in a representative system as described in section 7 of EN 61000 4 3 was placed  on a non conductive table 0 8 meters in height  The system under test was connected to the power  and signal wire according to relevant installation instructions     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Page 42 of 66 Report Version 1    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch        amp U VE    BURY   gt                  Report No       121207  012 1  4 3 6 TEST RESULTS                         RJ45 Port Data Transmitting DC5V From Adapter  TEST MODE TEST VOLTAGE  E  gt   100Mbps More than 10   Input AC230V 50Hz  ENVIRONMENTAL    CONDITIONS 23 2deg  C  42 5  RH TESTED BY  Harry       f  Field Strength I oe OUO Test Distance   V m  Frequency antenna  Note    MHz   3           Horizontal   Vertical   80 1000    Test  Remark   m  Result  H V 3 A N A  1400 2700 H  V 3       A N A          Tested Israel SII Frequencies 89 100 107 144 163 196 244 315 434 460 600 825 845 880  MHz          NOTE  A There was no change compared with initial operation during the test     Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch    No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City     Tel   86 755 8600 0151  Guangdong 523942  China    Fax   86 755 8600 
48. ort Version 1       Report No   RM121207N012 1    VERITAS    4 IMMUNITY TEST    4 1 GENERAL DESCRIPTION    Product Product Standard      Basic Standard     Specification  and  Performance  Criterion required    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Product Standard       301 489 1 V1 9 2 a TE  EN 301 489 17 V2 2 1            09          61000 4 2 Electrostatic Discharge   ESD   8 kV air discharge   m 4 kV contact discharge   Performance Criterion B  Radio Frequency Electromagnetic Field Susceptibility  Test     RS   80   1000 MHz  1400   2700 MHz  3 V m  80  AM  1  kHz   Performance Criterion A  EN 61000 4 4 Electrical Fast Transient Burst   EFT  AC Power line  1kV   DC Power line  0 5kV  Signal line  0 5kV  Performance Criterion B    EN 61000 4 5 Surge Immunity Test   1 2 50 us Open Circuit Voltage  8  20 us Short Circuit  Current   10 700 us Open Circuit Voltage  5  320 us Short Circuit  Current   AC Power Line  line to line 1 kV   line to earth 2kV  DC Power Line  line to earth 0 5kV  Signal line  1kV  Performance Criterion B    EN 61000 4 6 Conducted Radio Frequency Disturbances Test     CS   0 15   80 MHz  3 Vrms  8096 AM  1 kHz   Performance Criterion A    EN 61000 4 11 Voltage Dips    i  0  residual for 0 5 cycle   Performance Criterion B   ii  096 residual for 1 cycle   Performance Criterion B   ii  7096 residual for 25 cycle   Performance Criterion C   Voltage Interruptions    i  0  residual for 250 cycle   Performance Criterion C    No  34  Chenwu
49. r with other necessary    accessories or support units  The following support units or accessories were used to  form a representative test configuration during the tests                 PRODUCT BRAND   MODELNO  SERIAL NO  FCC ID  Notebook PC DELL 5P2PM2X 12400120329 N A      NO    DESCRIPTION OF THE ABOVE SUPPORT UNITS         1      Line  Unshielded  Detachable 0 8m  DC Line  Unshielded  Undetachable 1 8m     2 5 CONFIGURATION OF SYSTEM UNDER TEST    Please Refer to section 5 Photographs of the test configuration for reference     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 10 of 66 Report Version 1     amp U VE    BURA  Sul    1828    Report No   RM121207N012 1    3 EMISSION TEST    3 1 CONDUCTED EMISSION MEASUREMENT  3 1 1 LIMITS OF CONDUCTED EMISSION MEASUREMENT    TEST STANDARD  EN 55022    Class A  dBuV  Class B  dBuV   Frequency  MHz     01505   79   66   66 56 56 46    L    ess Ian et 71 4       5o   73             50      NOTE  1  The lower limit shall apply at the transition frequencies   2  The limit decreases in line with the logarithm of the frequency in the range of 0 15 to 0 50  MHz   3  All emanations from a class A B digital device or system  including any network of  conductors and apparatus connected thereto  shall not exceed the level of field streng
50. race       Limit         Limit                                                                      EN            86 755 8600 0151           86 755 8600 0159    No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China          Email  customerservice dg cn bureauveritas com       Page 13 of 66    Report Version 1    nu VE    B  URS  Sv LS    1828    Report           RM121207N012 1             RJ45 Port Data Transmitting  TEST MODE 6DB BANDWIDTH 9 kHz   100Mbps More than 10    DC 5V From Adapter  TEST VOLTAGE PHASE Neutral  N   Input AC230V 50Hz  ENVIRONMENTAL  CONDITIONS 17deg  C  50  RH TESTED BY Bin                      Reading Value     dB uV       Factor  dB  uV               AV     0 18600   9     0 21015    1 59008  3 17826  6 25017     20 12   60 00   50 00       7 95400    29 66   21 55   31 58   60 00   50 00    REMARKS     100    90    80      70     Bureau Veritas Shenzhen Co      Dongguan Branch    The emission levels of other frequencies were very low against the limit                        PK Trace  QP Limit    KJ TT    E       Pins  di                             ESSE                  I EEE    LT HIDE  m  PP AL                        AAN js                  Tel   86 755 8600 0151  Fax   86 755 8600 0159    No  34  Chenwulu Section  Guantai Rd   Houjie  Town  Dongguan City   Guangdong 523942  China    Ltd           Email  customerservice dg cn bureauveritas com       Page 14 of 66    Report Version 1     amp U VE    BUR    e  
51. rges were complete     g  Atleast ten single discharges  in the most sensitive polarity  were applied to the  Horizontal Coupling Plane at points on each side of the EUT  The ESD generator  was positioned horizontally at a distance of 0 1 meters from the EUT with the  discharge electrode touching the HCP     h  Atleast ten single discharges  in the most sensitive polarity  were applied to the  center of one vertical edge of the Vertical Coupling Plane in sufficiently different  positions that the four faces of the EUT were completely illuminated  The VCP   dimensions 0 5m x 0 5m  was placed vertically to and 0 1 meters from the EUT     4 2 4 DEVIATION FROM TEST STANDARD    No deviation     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 37 of 66 Report Version 1       Report No   RM121207N012 1    4 2 5 TEST SETUP     gt 0 8               Vertical coupling  plane          0 5mm Isolation Support        ESD  Generator    Nearest  Wall        Horizontal  coupling plane         Ground Reference Plane    For the actual test configuration  please refer to the related item     Photographs of the  Test Configuration     NOTE    TABLE TOP EQUIPMENT   The configuration consisted of a wooden table 0 8 meters high standing on the Ground Reference  Plane  The GRP consisted of a sheet of
52. s and the frequencies of at least six highest disturbances  were recorded from each telecommunication port  which comprises the EUT     3 2 4 DEVIATION FROM TEST STANDARD    No deviation    No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 16 of 66 Report Version 1       Report No   RM121207N012 1    3 2 5 TEST SETUP  For ISN  amp  Current Probe  UTP LAN cable      Current probe   4                EUT CDN ISN AE  40 cm  2   10 cm No restriction               on length  r  80 cm           127497           Associated equipment  EUT   Equipment under test  1  Distance to the reference groundplane  vertical or horizontal      2  Distance to the reference groundplane is not critical     For Current Probe  STP LAN cable      Connection to the outside    per surface of the shield  EUT          Ferrites          40         No restriction on    30 cmto 80 cm 10 cm ngth                    meh __  IEC 127507  AE   Associated equipment    EUT   Equipment under test    No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 17 of 66 Report Version 1       Report No   RM121207N012 1    For Voltage
53. t No   RM121207N012 1    4 6 CONDUCTED RADIO FREQUENCY DISTURBANCES  CS     4 6 1 TEST SPECIFICATION    Basic Standard  EN 61000 4 6  Frequency Range  0 15 MHz   80 MHz  Field Strength  3 Vrms  Modulation  1 kHz Sine Wave  80   AM Modulation  Frequency Step  1   of preceding frequency value  Coupled cable  Power Mains  Unshielded  Coupling device  CDN M2  2 wires     4 6 2 TEST INSTRUMENT    Equipment                                            No   Last Cal   NextCal              50Watt HUBER SUHNER  5906 17 0005 1303688 Oct 15 12 1061 14 13  Attenuator    Signal Amplifier HAEFELY PAMP250 149594    Electromagnetic       EM101 35640 Oct 15 12  Oct 14 13  Injection Clamp    C S Test System HAEFELY WinPAMP NSEMC002 May 15 12  May 14 13       NOTE  1  The test was performed in CS Room   2  The calibration interval of the above test instruments is 12 months and the  calibrations are traceable to CEPREI CHINA and NIM CHINA    No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 50 of 66 Report Version 1       Report No   RM121207N012 1    4 6 3 TEST PROCEDURE    a  The test was performed with the test generator connected to each of the coupling  and decoupling devices in turn  while the other non excited RF input ports of the  coupling devices are terminated by a 50 ohm load resistor  
54. test was performed in EMS Room 2     2  The calibration interval of the above test instruments is 12 months and the  calibrations are traceable to CEPREI CHINA and NIM CHINA     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 47 of 66 Report Version 1       Report No   RM121207N012 1    4 5 3 TEST PROCEDURE    a  For EUT power supply     The surge is applied to the EUT power supply terminals via the capacitive  coupling network  Decoupling networks are required in order to avoid possible  adverse effects on equipment not under test that may be powered by the same  lines  and to provide sufficient decoupling impedance to the surge wave  The  power cord between the EUT and the coupling decoupling networks was shorter  than 2 meters in length     b  For test applied to unshielded unsymmetrically operated interconnection lines of  EUT     The surge was applied to the lines via the capacitive coupling  The coupling    decoupling networks didn t influence the specified functional conditions of the EUT   The interconnection line between the EUT and the coupling decoupling networks  was shorter than 2 meters in length         Fortest applied to unshielded symmetrically operated interconnection    telecommunication lines of EUT     The surge was applied to the lines via gas arrestors
55. ths  specified above        3 1 2  TEST INSTRUMENTS      Equipment   Manufacturer                  Serial         Last Cal    Next Cal       Impedance Stabilization TESEQ ISN T800   27957   Oct 10 12   Oct  09 13  Network  ADT  Cond  owe  _v737       NOTE  1  The calibration interval of the above test instruments is 12 months and the  calibrations are traceable to CEPREI CHINA and NIM CHINA   2  The test was performed in shielding room 553     No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 11 of 66 Report Version 1       Report No   RM121207N012 1    3 1 3 TEST PROCEDURE    a  The EUT was placed 0 4 meters from the conducting wall of the shielded room  with EUT being connected to the power mains through a line impedance  stabilization network  LISN   Other support units were connected to the power  mains through another LISN  The two LISNs provide 50 Ohm  50uH of coupling  impedance for the measuring instrument     b  Both lines of the power mains connected to the EUT were checked for maximum  conducted interference     c  The frequency range from 150 kHz to 30 MHz was searched  Emission levels  under  Limit   20dB  was not reported     3 1 4 DEVIATION FROM TEST STANDARD  No deviation     3 1 5 TEST SETUP    Vertical Ground  Reference Plane Test Receiver          m Horizont
56. tion of performance  After the test no change of actual operating data  or user retrievable data is allowed    If the minimum performance level or the permissible performance degradation is not  specified by the manufacturer then either of these may be derived from the product  description and documentation  including leaflets and advertising  and what the user may  reasonably expect form the apparatus if used as intended    NOTE 3  During the test used the software to monitor the EUT    s output data        No  34  Chenwulu Section  Guantai Rd   Houjie   Tel   86 755 8600 0151  Town  Dongguan City  Fax   86 755 8600 0159  Guangdong 523942  China Email  customerservice dg cn bureauveritas com    Bureau Veritas Shenzhen Co   Ltd   Dongguan Branch       Page 35 of 66 Report Version 1     amp U VE    B  URS  Sul    1828    Report No   RM121207N012 1    4 2 ELECTROSTATIC DISCHARGE IMMUNITY TEST  ESD     4 2 1 TEST SPECIFICATION    Basic Standard  EN 61000 4 2  Discharge Impedance  330 ohm   150 pF  Discharge Voltage  Air Discharge  2  4  8 kV  Direct   Contact Discharge  2  4 kV  Indirect   Polarity  Positive  amp  Negative  Number of Discharge  Contact Discharge  200 times in total  Air Discharge 20 times on each test points  Discharge Mode  Single Discharge  Discharge Period  1 second    4 2 2 TEST INSTRUMENT    Model No    SerialNo    Last Cal    Next Cal     ESD Generator TESEQ NSG 437 Oct 15 12 Oct 14 13  TESEQ V03 03       NOTE  1  The test was performed in ESD Room   2  Th
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
IK106 TUEUR D`INSECTES  edition en pdf  Presto Lifts PPS2200-125AS Use and Care Manual  Brush Pro - Interlink Supply  Mutual Funds and Insurance  Tripp Lite 3.5mm Mini Stereo Audio Cable for Microphones, Speakers and Headphones (M/M), 1-ft.  Alpine CDE-120R Car Stereo System User Manual  User`s Manual Multi-format to 1-fiber DVI converter, OMVC-200  PC MECA POLYVALENT AUTO - provisoire  The Quarter Hour Watch    Copyright © All rights reserved. 
   Failed to retrieve file