HD Mini Pattern Signal Generator
Contents
1. 2CH 1080P 060 H 1920 BID PC HD 3D M 4 PATTERN TIMING M K INT EXT button Press to External toggle between Internal and Mode When the Signal Generator is in External Mode the INT EXT button will glow bright blue External EXT Mode without source The Signal Generator display indicates that no source signal is being received BYPASS ppm External EXT Mode with source The display shows the current resolution and timing information of the source device BYPASS 1080P 60 H 1920 16 OPERATING THE HD MINI PATTERN SIGNAL GENERATOR Accessing the Menu Svstem The HD Mini Pattern Signal Generator has a built in on screen Menu Svstem which provides access to additional functions during testing Press the M button to display the Main Menu M 4 Press this button to displav the built in on screen Menu Svstem 48K 2CH 1080P 060 H 1920 MM HD Mini Pattern Signal Generator NOTE If an external source is being used the Main Menu will ap pear in the foreground of the input signal If no external source is being used then the currently displayed pattern will be replaced by a black background with the Main Menu in the foreground MAIN MENU 17 MENU SYSTEM Menu Svstem Svstem Info Provides basic information about the sink and the source If an external source is connected to the Signal Generator the Input Device Information will also be d2. HOM 7080P PROGRESSIVE HD Mini Pattern Signal Generator GTV HD MPSG User Manual gefentv com ASKING FOR ASSISTANCE Technical Support Telephone 818 772 9100 800 545 6900 Fax 818 772 9120 Technical Support Hours 8 00 AM to 5 00 PM Monday through Friday Pacific Time Write To Gefen LLC c o Customer Service 20600 Nordhoff St Chatsworth CA 91311 support gefentv com www gefentv com Notice Gefen LLC reserves the right to make changes in the hardware packaging and any accompanying documentation without prior written notice HD Mini Pattern Signal Generator is a trademark of Gefen LLC HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing in the United States and other countries 2011 Gefen LLC All Rights Reserved All trademarks are the property of their respective owners Rev Ad CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Top Panel Layout 5 Top Panel Descriptions 6 Side Panel Layout 7 Side Panel Descriptions 8 Connecting the HD Mini Pattern Signal Generator 8 Wiring Diagram 9 Operating the 4x1 HD Switcher w Audio Decoding 9 Powering the Signal Generator 10 Display Window 11 Pattern Buttons 13 Timing Buttons 14 Audio Button 15 Switching between PC HD and 3D signal types 16 Switching between Internal and External Mode 17 Accessing the Menu System 18 Menu System 18 System Info 19
3. mres Pop evi e so imo o esi e 60 1920x1060 109g s0 1920x1080 sop s0 199x109 osop 24 199x109 33 SPECIFICATIONS Maximum Pixel Glock ie trei d A dece 225 MHz VideolnputConnector 1 HDMI Type A 19 pin female VideoOutputConnector 1 HDMI Tvpe A 19 pin female AUGIO 0 e tii a B hacia 1 TOSLINK Service Port sarsan samir 1 3 5 mm mini stereo for firmware upgrade Display iii Mini aneen OLED Organic Light Emitting Diode xo ge og S 5V DC Power GOMSUMPUOM toc icon bii Hid tr Eee Ete Eee eser 3W max Operating Temperatute 2 ica botes tee mr ee sco dE 0 40 C Dimensions W x H x D sei nee mem 4 70 x 0 98 x 2 76 119mm x 22mm x 70mm shipping Welg Ht sistemi sanar ops ta ri eiaa ap tear 1 0 Ib 0 5 kg 34 WARRANTV Gefen warrants the equipment it manufactures to be free from defects in material and workmanship If equipment fails because of such defects and Gefen is notified within two 2 vears from the date of shipment Gefen will at its option repair or replace the equipment provided that the equipment has not been subjected to mechanical electrical or other abuse or modifications Equipment that fails under conditions other than those covered will be repaired at the current price of parts and labor in e
4. press the MENU button An asterisk will appear next to the selection indicating that the Signal Generator will use the stored Internal EDID 4 Usethe A and V Pattern buttons to scroll down to the Exit option then press the MENU button to return to the Main Menu 21 MENU SVSTEM Sink Edid gt EXT Sets the Signal Generator to use the External EDID The active EDID Internal or External will be highlighted in orange text The External EDID is equivalent to the downstream pass through mode Svstem Info Sink Edid Block Data Source Infoframe Description CEC Command INT GEF Audio Return DeepColor Set Save to INT Max KSV Count Exit Exit Press the MENU button on the Signal Generator 2 Use the A and V Pattern buttons to highlight the Sink Edid function then press the MENU button to access the Sink Edid submenu 3 Use the A and V Pattern buttons to select EXT then press the MENU button An asterisk will appear next to the selection indicating that the Signal Generator will use the External EDID 4 Use the A and V Pattern buttons to scroll down to the Exit option then press the MENU button to return to the Main Menu 22 MENU SVSTEM Sink Edid 2 Save to INT Saves the downstream EDID to the Signal Generator The Manufacturer ID of the EDID will be indicated next to the INT option a Gefen EDID is shown in the example below Sink Edid Block Data Source Infoframe Description CEC Command IN
5. 14 OPERATING THE HD MINI PATTERN SIGNAL GENERATOR Switching between PC HD and 3D signal tvpes Press the PC HD 3D button to switch between PC VESA HD and 3D signal tvpes E SE NE 1080P 1080P 060 BID AUDIO M lt 1 PATTERN TIMING Sic ee a PC HD 3D button Press to cvcle through the audio output formats PC Signal Displaved in VESA format along with the 192K 2CH refresh rate PC signals also show both VGA 60 the number of Horizontal and Vertical scan lines H640 V480 HD Signal Includes resolutions from 480i to 1080p 192K 2CH The refresh rate is listed along with the 480P 60 number of active vertical scan lines horizontal resolution H 720 3D Signal Only 720p and 1080p signals provide 192K 2CH 3D support on the Signal Generator See page 33 for a list of available 3D 720P 60 transmission methods H 1 280 3DFP The 3D transmission format is abbreviated in the lower right of the display 15 OPERATING THE HD MINI PATTERN SIGNAL GENERATOR Switching between Internal and External Mode Bv default the Signal Generator will output a signal to a displav or other output device Pressing the INT EXT button will enable or disable the HDMI In connector on the Signal Generator Connecting an external source to the HDMI In connector will provide information on depth extended colorimetrv video and count 48K attributes such as color space color audio infoframe information and KSV
6. GENERATOR How to Connect the HD Mini Pattern Signal Generator Connect an HDMI cable from the HD Mini Pattern Signal Generator to the HDTV Displav OPTIONAL Connect an optical cable from the TOSLINK connector on the Signal Generator to an audio amplifier e NOTE The TOSLINK audio output connector can only be used when using the Audio Return Channel ARC feature in HDMI 1 4 OPTIONAL Use an HDMI cable to connect a Hi Def source to the HDMI In on the Signal Generator See page 16 for more information on using an input source Connect the included 5V DC power supply to the power receptacle on the HD Mini Pattern Signal Generator and connect the AC adapter to an available electrical outlet Wiring Diagram for the GefenToolbox HD Pattern Signal Generator G efe n G l DIGITAL AUDIO TOSLINK CABLE mem HDMI CABLE mem Hi Def Source HD Mini Pattern Signal Generator A HD Display Pj Audio Receiver GTV HD MPSG OPERATING THE HD MINI PATTERN SIGNAL GENERATOR Powering the Signal Generator Once the Signal Generator is connected to a power source the Power button will glow bright red Press the Power button to power ON the Signal Generator When the Signal Generator is powered the power button will glow bright blue Use the Power button to turn the Signal Generator ON or OFF NOTE If the power cord is disconnected from the Signal Generator then the Signal Generator will automaticallv return to the
7. Nordhoff St Chatsworth CA 91311 1 800 545 6900 818 772 9100 fax 818 772 9120 www gefentv com support gefentv com O E cc o 8 This product uses UL or CE listed power supplies
8. last pow L ered state ON or OFF when the power cord is reconnected HD Mini Pattern Signal Generator Power button Press to turn ON or turn OFF the HD Mini Pattern Signal Generator Standby Mode Powered Power button is RED Power button is BLUE power must be connected OPERATING THE HD MINI PATTERN SIGNAL GENERATOR Displav Window The Displav window of the GefenTV HD Mini Pattern Signal Generator uses a high resolution OLED display This display will show the currentiv selected timing and pattern on the output In addition this displav is also used for providing information or messages about an input source When the unit is powered on a screen similar to the following will be displaved Audio Sampling Rate Audio Channels Displavs the current sampling Displavs the number of audio rate of the audio signal channels see page 14 48K 2CH 1060P C 6 0 a Displays the currently H 1 9 2 0 selected timing Horizontal Resolution Displays the number of vertical scanlines Some timings will also display the Vertical Resolution 48K 2CH 1080P 1080P 060 ij Q PATTERN TIMING M M HD Mini Pattern Signal Generator 10 OPERATING THE HD MINI PATTERN SIGNAL GENERATOR Pattern Buttons To change the pattern use the A and V Pattern buttons The A button will move forward through the patterns Use the W button to move backward through the patterns The Signal Generator contains 6 test patte
9. move backward through the timings See page 33 for a list of supported timings A button Cvcles forward through the timings 48K 2CH 1080P 060 H 1920 A Q m J HD Mini Pattern Signal Generator V button Cycles backward through the timings Selecting the 3D format Use the Timing buttons to select the 3D format when using the 3D testing pattern The following 3D formats are available Pattern Shown on displav as Side by Side 3DSH Top Bottom 3DTB Frame Packing 3DFP NOTE Because the HD Mini Pattern Signal Generator uses a touch Screen each button will momentarily glow bright blue when it is pressed OPERATING THE HD MINI PATTERN SIGNAL GENERATOR Audio Button Press the AUDIO button to cvcle through the different audio output formats Note that audio is only output over HDMI The TOSLINK connector is reserved for the Audio Return Channel ARC 48K 2CH 1080P 1080P 060 iki Q m PATTERN TIMING M K HD Mini Pattern Signal Generator AUDIO Press to cycle through the audio output formats The table below lists the order in which each of the audio settings will appear after each press of the AUDIO button The audio frequency is always 1 kHz Sampling Rate Number of Audio Channels 48 kHz 2 Channel 48 kHz 5 1 Channel 48 kHz 7 1 Channel 96 kHz 2 Channel 192 kHz 2 Channel NOTE The highlighted audio settings are only available when using 3D timings 3DFP 3DSH 3DTB
10. to toggle between PC VESA resolutions HD resolutions and the 3D test pattem 5 AUDIO Pressing this button consecutively will cycle through the different audio output optidms See page 14 for details 6 M Displays the Main Menu See page 17 for more information 7 TIMINGW Cvcles backward through the list of timings 8 PATTERN Y Cycles backward through the list of patterns 9 TIMING A Cycles forward through the list of timings 10 PATTERN A Cycles forward through the list of patterns SIDE PANEL LAVOUT Left Side Right Side SIDE PANEL DESCRIPTIONS Service This port is used for performing firmware updates An RS 232 to 3 5 mm adapter is required for the update process ARC Optical Out Connect an optical cable from this TOSLINK connector to an audio amplifier This TOSLINK connector can only be used when using the Audio Retum Channel ARC feature in HDMI 1 4 HDMI Out Connect an HDTV display to this HDMI port DVI displays can be connected using an HDMI to DVI cable or adapter HDMI In Used to connect a Hi Def source to the Signal Generator using an HDMI cable DVI sources can be connected using an HDMI to DVI cable or adapter Connect a sound device to the HDMI In port to obtain infoframe and other information from the source device DC 5V Connect the included 5 V DC power supply to this connector Service button Used during the firmware update procedure CONNECTING THE HD MINI PATTERN SIGNAL
11. Code 5 1920x1080i 59 94 60Hz Pixel Repetition No Repetition RGB or VCbCr RGB Active Format Information Active Format R R3 Bar Info Vert and Horiz Scan Information No Data DOWN 24 MENU SYSTEM Source Infoframe gt AUD Displays information about the Audio Infoframe packet System Info CEC Command Audio Return DeepColor Set Max KSV Count k N eo A e Press the MENU button on the Signal Generator Use the A and V Pattern buttons to highlight the Source Infoframe function then press the MENU button to access the Source Infoframe submenu Use the A and V Pattern buttons to select AUD then press the MENU button Use the A and V Pattern buttons to scroll through each of the pages Press the MENU button to return to the Main Menu AUD InfoFrame Packet DataBvte HEX 84 01 OA 01 00 00 00 00 00 00 00 00 00 InfoFrame Type Code 4h InfoFrame Version Number 1h Length of AUD InfoFrame Ah CheckSum 70h Analog Coding Type Refer to Stream Header Audio Channel Count 2 channel Sampling Frequency Refer to Stream Header Sample Size Refer to Stream Header Speaker Placement FL FR Level Shift Value 0dB DOWN 25 MENU SVSTEM CEC Command Sends a CEC command to the downstream device There are three CEC commands that can be transmitted Standbv Active Source Monitor CEC Commands gt Standby Command Tvpe Request Issues a Svs
12. Sink Edid 24 Source Infoframe 26 CEC Command 29 Audio Return 30 DeepColor Set 31 Max KSV Count 33 Supported Timings 34 Specifications 35 Warranty INTRODUCTION Congratulations on vour purchase of the GefenTV HD Pattern Signal Generator Vour complete satisfaction is verv important to us About Gefen We specialize in total integration for vour home theater while also focusing on going above and bevond customer expectations to ensure vou get the most from vour hardware We invite vou to explore our distinct product line Please visit http www gefen com for the latest offerings in High Definition signal solutions or call us between the hours of 8 00 am and 5 00 pm Mondav Fridav Pacific Standard Time for assistance with your A V needs We ll be happy to assist you GefenTV The GefenTV line offers portable and easy to install solutions for common A V System integration setups using HDMI connectivity GefenTV products are wall mountable and small in size GefenTV products are easily transported in the field and are ready for immediate and simple installations in working environments The GefenTV HD Mini Pattern Signal Generator The GefenTV HD Mini Pattern Signal Generator is the most advanced testing device for your audio and video equipment 19 built in timings 6 patterns and 1 3D pattern provide hundreds of testing combinations for both analog and digital devices The front panel LCD screen provides easy viewing of funct
13. T GEF Audio Return DeepColor Set Save to INT Max KSV Count Exit Exit Uu lt VA ct t Ei H 5 o Press the MENU button on the Signal Generator 2 Use the A and V Pattern buttons to highlight the Sink Edid function then press the MENU button to access the Sink Edid submenu 3 Use the A and V Pattern buttons to select Save to INT The source EDID will be saved to the Signal Generator 4 Use the A and V Pattern buttons to scroll down to the Exit option then press the MENU button to return to the Main Menu 23 MENU SYSTEM Source Infoframe Displavs information on the transmission of Infoframe packets Options AVI AUD Source Infoframe 2 AVI Displavs information about the AVI Video Infoframe packet Svstem Info Sink Edid CEC Command AUD Audio Return DeepColor Set Max KSV Count Exit Press the MENU button on the Signal Generator 2 Usethe A and V Pattern buttons to highlight the Source Infoframe function then press the MENU button to access the Source Infoframe submenu 3 Usethe A and V Pattern buttons to select AVI then press the MENU button 4 Use the A and V Pattern buttons to scroll through each of the pages 5 Press the MENU button to return to the Main Menu AVI InfoFrame Packet DataByte HEX 82 02 OD 1C A8 00 05 00 OF 00 2A 02 18 01 97 08 InfoFrame Type Code 2h InfoFrame Version Number 02h Length of AVI InfoFrame ebh CheckSum B3h Video
14. ffect at the time of repair Such repairs are warranted for ninetv 90 davs from the dav of reshipment to the Buver This warrantv is in lieu of all other warranties expressed or implied including without limitation anv implied warrantv or merchantabilitv or fitness for anv particular purpose all of which are expressly disclaimed 1 Proof of sale may be required in order to claim warranty 2 Customers outside the US are responsible for shipping charges to and from Gefen 3 Copper cables are limited to a 30 day warranty and cables must be in their original condition The information in this manual has been carefully checked and is believed to be accurate However Gefen assumes no responsibility for any inaccuracies that may be contained in this manual In no event will Gefen be liable for direct indirect special incidental or consequential damages resulting from any defect or omission in this manual even if advised of the possibility of such damages The technical information contained herein regarding the features and specifications is subject to change without notice For the latest warranty coverage information refer to the Warranty and Return Policy under the Support section of the Gefen Web site at www gefen com PRODUCT REGISTRATION Please register your product online by visiting the Register Product page under the Support section of the Gefen Web site 35 Rev Ad XMA GTV HD MPSGx 20600
15. ions and fea tures for each timing pattern This device can be conveniently controlled via the front panel buttons the IR remote or the downloadable software from the Gefen Web site In addition to its portability this signal generator is wall mountable and field upgradeable How It Works Connect the HDMI output port of the GefenTV HD Mini Pattern Signal Generator to your HDTV display Power on all equipment The front panel LCD will display all features and options of the active timing and pattern You can feed digital or analog audio into the generator s rear panel and hear multi channel digital audio or use the built in sine wave test tone OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE GEFENTV HD MINI PATTERN SIGNAL GENERATOR Firmware updates for the GefenTV HD Mini Pattern Signal Generator can be downloaded under the Support gt Downloads section of the Gefen Web site FEATURES Features Supports SD and HD resolutions up to 1080p Full HD e Supports VESA resolutions up to 1920x1200 WUXGA 60Hz e 19 built in timings 6 patterns and 1 3D pattern in three different formats e 3D pattern support HDCP pattern Upto 12 bit Deep Color support at 1080 Full HD e Signal Generator bypass mode for analyzing an external source e Supports LPCM 7 1CH 48 96Khz LPCM 5 1CH 48 96Khz and LPCM 2CH 48 96Khz Analyzes input source info frame and output sink EDID e Touch button control OLED sh
16. isplayed Svste Sink Edid Source Infoframe CEC Command Audio Return DeepColor Set Max KSV Count Exit E be highlighted N Press the MENU button to display the device information wo Press the MENU button again to return to the Main Menu Source Name Video Signal Resolution 1080i 60Hz Color Space 8 bit Sink Name GEF300XUT DeepColor Support Y444 0 48bit 0 36bit 0 30bit 0 3D Format Not Support 18 Press the MENU button on the Signal Generator The System Info option will MENU SYSTEM Sink Edid Displavs EDID information from the downstream device Options Block Data Description Sink Edid gt Block Data Displavs the EDID block data in hexadecimal format MAIN MENU gt gt INT GEF 1 Press the MENU button on the Signal Generator 2 Use the A and V Pattern buttons to highlight the Sink Edid function then press the MENU button to access the Sink Edid submenu 3 Use the A and V Pattern buttons to select Block Data then press the MENU button to display Block 0 4 Usethe A and V Pattern buttons to switch between Block 0 and Block 1 5 Press the MENU button to return to the Main Menu EDID BLOCK 0 19 MENU SYSTEM Sink Edid gt Description Displavs a verbose description of the EDID data structure MAIN MENU Svstem Info TE z Source Infoframe Blo CEC Command INT GEF 1 Press the MENU button on the Signa
17. l Generator 2 Usethe A and V Pattern buttons to highlight the Sink Edid function then press the MENU button to access the Sink Edid submenu 3 Use the A and V Pattern buttons to select Description then press the MENU button 4 Usethe A and V Pattern buttons to scroll through each of the pages 5 Press the MENU button to return to the Main Menu ID Manufacturer Name ID Product Code Hex ID Serial Number Hex Week of Manufacture Year of Manufacture EDID Version EDID Revision VESA DFP 1 x MAX Horz Size MAX Vert Size Gamma value GEF 0065 00000000 50 2009 sq 573 Not Support 051cm 029cm 2 20 lt PAGE 01 gt 20 MENU SVSTEM Sink Edid 2 INT Sets the Signal Generator to use the Internal EDID The Manufacturer ID of the EDID will be indicated next to the INT option a Gefen EDID is shown in the example below Use the Save to INT option to store an Internal EDID See page 23 for details The active EDID Internal or External will be highlighted in orange text Svstem Info Sink Edid Block Data Source Infoframe Description CEC Command Audio Return EXT DeepColor Set Save to INT Max KSV Count Exit Exit Press the MENU button on the Signal Generator 2 Use the A and V Pattern buttons to highlight the Sink Edid function then press the MENU button to access the Sink Edid submenu 3 Use the A and V Pattern buttons to select INT Manufacturer ID then
18. nal Generator 4 Usethe A and V Pattern buttons to highlight the Max KSV Count function 5 Press MENU button to begin the KSV count process The KSV count process may take several minutes to complete During the KSV count process a progress bar indicates that the Signal Generator is still processing the KSV count request The INT EXT button glows blue when set to External mode Start to find EID PC HD 3D AUDIO M A PATTERN TIMING v v HD Mini Pattern Signal Generator 31 MENU SYSTEM 5 After the Max KSV Count process has completed the Signal Generator will display a message similar to the following Start to find KSV 16 PATTERN TIMING J HD Mini Pattern Signal Generator It is important to note that not all devices will report a KSV count In this case the Signal Generator will not perform a KSV count NOTE When running the Max KSV Count the source signal will occasionally blank out This is normal behavior 32 SUPPORTED TIMINGS Table of Supported Timings The table below lists the supported timings available in the HD Mini Pattern Signal Generator Timing Name 3D Transmission Method eee vene so soxsoo xaoso 1020x768 sag s0 oxa GE 1920x1200 ase moxso 1 pgs 720x480 sms moxsm 1 ser so r xs eeso 1260x7209
19. or Read Command Tvpe Informative Displavs the traffic on the CEC line from the monitor displav Svstem Info Sink Edid Source Infoframe Standbv CEC Command Active Source Audio Return Monitor Read DeepColor Set Exit Max KSV Count Exit 1 Press the MENU button on the Signal Generator 2 Use the A and V Pattern buttons to highlight the CEC Command function then press the MENU button to access the CEC Command submenu 3 Use the A and V Pattern buttons to select Monitor Read then press the MENU button 4 The Signal Generator will send a Monitor Read information request to the downstream sink Any CEC messages sent to the downstream sink by other source devices will be displayed on the screen MENU SVSTEM Audio Return The Audio Return option enables disables the Audio Return Channel ARC When ARC is enabled the audio is returned from the downstream device The audio signal is carried over an HDMI 1 4 cable from the downstream device to the Signal Generator and outputted via the TOSLINK connector Audio Return gt ON Enables the Audio Return Channel ARC Audio Return gt OFF Disables the Audio Return Channel ARC The active ARC status will be highlighted in orange text System Info Sink Edid Source Infoframe CEC Command Audio Return DeepColor Set Max KSV Count Exit Press the MENU button on the Signal Generator 2 Use the A and V Pattern buttons to highlight
20. ow Input Output timing information Supports ARC Audio Return Channel using TOSLINK output Firmware upgradeable via 3 5mm plug requires DB 9 to 3 5mm adapter Sample Applications Apparatus Testing and Troubleshooting Equipment Adjustment EDID checking e Source Sink definition e HDCP Verification Package Includes 1 GefenTV HD Mini Pattern Signal Generator GTV HD MPSG 1 5V 1A DC Power Supply EXT PS51AIP O 1 Quick Start Guide QSG GTV HD MPSG TOP PANEL LAVOUT Top Panel OL Jog euau90g euf s uu3130 d UIN n n mA M 0 61 H 098 d0801 TET bul TOP PANEL DESCRIPTIONS 1 Power Press this button to turn the Signal Generator power ON or OFF The Power button will glow red when the Signal Generator is in Standbv Mode In Standbv Mode the unit consumes less than 1W of power 2 Displaywindow The high resolution OLED display shows pattern timing and audio information Additional information is displayed when using an external source See page 10 for more information 3 INT EXT Press this button to toggle between External and Internal modes When analyzing a sink device e g HDTV display A V Receiver etc the Signal Generator should be set to Internal INT mode When the Signal Generator is used with an external source the Signal Generator should be set to External EXT mode This button will glow bright blue when set to External mode 4 PC HD 3D Press this button
21. rns and 1 3D pattern with three different formats The current timing is displaved in upper left hand corner of the OLED screen A button Cvcles forward through the timings 48K 2CH 1080P 060 Mall MM HD Mini Pattern Signal Generator V button Cycles backward through the timings HDCP Pattern Purity Red If the output device does not This pattern is tvpicallv used to support HDCP content then the check color puritv output device will not displav a signal 720p 60Hz 720p 60Hz 11 OPERATING THE HD MINI PATTERN SIGNAL GENERATOR Puritv Green This pattern is tvpicallv used to check color puritv 720p 60Hz Color Bar The Red Green Blue color bar pattern is tvpicallv used to test for color convergence 720p 60Hz Side by Side 3DSH Side by Side 3D Pattern 720p 60Hz 720p 60Hz Side by Side Side by Side Frame Packing 3DFP Frame Packing 3D Pattern not shown Purity Blue This pattern is typically used to check color purity 720p 60Hz Needle This grey and black pattern is typically used to test horizontal bandwidth and phase behavior of color monitors 720p 60Hz Top Bottom 3DTB Top Bottom 3D Pattern 20p 60Hz r B 720p 60Hz OPERATING THE HD MINI PATTERN SIGNAL GENERATOR Timing Buttons To change the timing use the A and W Timing buttons The A button will move forward through the timings Use the W button will
22. tem Standbv message which places all connected devices in Standbv Mode Svstem Info Sink Edid Source Infoframe CEC Command Audio Return DeepColor Set Max KSV Count Exit Press the MENU button on the Signal Generator 2 Use the A and V Pattern buttons to highlight the CEC Command function then press the MENU button to access the CEC Command submenu 3 Use the A and V Pattern buttons to select Standby then press the MENU button 4 The Signal Generator will send a Standby request message to all devices connected to the sink All connected devices will be placed in standby mode MENU SVSTEM CEC Commands gt Active Source Command Tvpe Request This command switches to the next active source If the next active source is not connected or not powered then the display will appear blank System Info Sink Edid Source Infoframe CEC Command Audio Return DeepColor Set Max KSV Count Exit Press the MENU button on the Signal Generator 2 Use the A and V Pattern buttons to highlight the CEC Command function then press the MENU button to access the CEC Command submenu 3 Use the A and V Pattern buttons to select Active Source then press the MENU button 4 The Signal Generator will send an Active Source request message to the downstream sink The Active Source request will switch away from the current input to the next active input on the sink MENU SVSTEM CEC Commands gt Monit
23. the Audio Return function then press the MENU button to access the Audio Return submenu 3 Use the A and V Pattern buttons to select ON to enable the Audio Return Channel ARC 4 Select OFF to disable the Audio Return Channel ARC 29 MENU SVSTEM DeepColor Set Sets the bit depth for Deep Color DeepColor Set gt 8bit Sets the output signal to 8 bit Deep Color DeepColor Set gt 10bit Sets the output signal to 10 bit Deep Color DeepColor Set gt 12bit Sets the output signal to 12 bit Deep Color The active color depth will be highlighted in orange text System Info Sink Edid Source Infoframe E CEC Command Audio Return DeepColor Set Max KSV Count Exit Press the MENU button on the Signal Generator 2 Use the A and V Pattern buttons to highlight the DeepColor Set function then press the MENU button to access the DeepColor Set submenu 3 Use the A and V Pattern buttons to highlight either 8 bit 10 bit or 12 bit Deep Color output settings 4 Press the MENU button to select the desired bit depth 30 MENU SYSTEM Max KSV Count Returns the KSV count of the source device Sink Edid Source Infoframe CEC Command Audio Return DeepColor Set Max KSV Count Exit VA lt VA ct t H 5 o Connect an external source device to the HDMI In on the Signal Generator 2 Press the INT EXT button to turn on External mode 3 Press the MENU button on the Sig
Download Pdf Manuals
Related Search