Welltech WellGate 2626 User Manual
Contents
1. Manual DNS auto will retrieve the DNS information sent from the DHCP server Manual will look at the specified Primary and Secondary DNS address Primary DNS address Specify the address of the Primary DNS Secondary DNS Specify the address of the address Secondary DNS WAN Link Speed Select the connection speed for the WAN port of the WG2626 you can choose the following vV vV vV Auto 100M e 10M HTTP port for WEB Specify the port number for management WEB management the allowable range is 80 1024 65535 HTTPS port for WEB The http SSL port the default management is 443 1024 65535 IP address Specify the IP address Copyright 2010 Welltech Computer Co Ltd All right reserved far WELLTECI WellGate 2626 User Manual EN V2 0 Subnet mask Specify the subnet mask vV Copyright 2010 Welltech Computer Co Ltd All right reserved 10 fr WELLTEC WellGate 2626 User Manual EN V2 0 Device __WAN Setting Item Description Static IP DHCP PPPoE Default gateway Specify the IP address of the default gateway V Remote access restriction Restricts Blocks users connecting to the WAN port s IP remotely you can Enable Disable this option PPPoE userID Specify the username of the PPPoE account PPPoE password Specify the password associated to the PPPoE account above Reboot after remote2. WAN MAC Displays the MAC address of the WAN port Version Information Boot version Displays the current boot version loaded on the WG2626 Post version Displays the current post version Copyright 2010 Welltech Computer Co Ltd All right reserved 22 fr WELLTEC WellGate 2626 User Manual EN V2 0 loaded on the WG2626 Application version Displays the current application version loaded on the WG2626 Line Status Item Displays the corresponding port number Type Displays the port type FXS FXO of the corresponding port number Line Number Displays the line number Status Displays the status of the port Register Displays the registration status of the corresponding port number Copyright 2010 Welltech Computer Co Ltd All right reserved 23 fr WELLTECH Advanced Configuration Advanced Configuration_Call Routing VOM Gateway None v WellGate 2626 User Manual EN V2 0 None v None v Call Routing e Status enable or disable this routing Prefix matched DNIS called number prefix Min Length matched DNIS minimum length This DM can only be executing when the received DNIS is longer than it Route to The outgoing call type could be FXO FXS VOIP Backup route to If primary route is unable to reach the destination whether to use the backup routing or not The back
3. button to apply the changes Copyright 2010 Welltech Computer Co Ltd All right reserved 29 fin WELLTECID WellGate 2626 User Manual EN V2 0 Management LETTE TS English Export File Click the Export button to export user cfg data Import File Specify the file path and file name to Import the configuration data 1 After import data press the Reboot button to apply the changes Management_Upgrade Firmware Petites English EE start After processing start please wait for success message and DO NOT power off Http Upload Specify the location of the firmware for uploading through Http 1 Under Device Management gt Software Upgrade web menu specify the location of the firmware by clicking the Browse button next to the Http Upload text box Copyright 2010 Welltech Computer Co Ltd All right reserved 30 fr WELLTEC WellGate 2626 User Manual EN V2 0 2 You will be prompted with a window requesting the location of the firmware 3 Locate the firmware that is stored in your hard drive 4 Once located click the Open button 5 Back in the web configuration menu press the Start button next to the Http Upload s browse button to execute the upgrade process 6 Please wait while the device updates itself with the firmware 7 After the update process is finish you will be taken to a web page indicating t
4. e fice __ NR Greeting gt Status gt Advanced Configuration le Management 1 Inthe Service_Preference section see figure 10 you can specify the Codec Policy by your requirement of environment The priority of codecs for the three types are shown below gt Bandwidth If your Internet Connection had very limited bandwidth please select bandwidth priority The codec priority will be G 723 G 729 and G 711 gt Regular For most of case or unknown environment please select Regular The codec priority will be G729 G 723 and G 711 gt Quality If your network is only running on the LAN environment or have no any concerns of bandwidth please select Quality The codec priority will be G 711 G 729 and G 723 The default setting is Regular 2 Press the Apply button at the bottom after you finish to save changes Press the Reboot button to apply the changes Copyright 2010 Welltech Computer Co Ltd All right reserved 15 fur WELLTECD WellGate 2626 User Manual EN V2 0 Ist w Disable 2nd Disable x Disable Sth Disable x 23 3rd v Disable x Disable In the Service_Extension Line Setting section see figure 11 you can set the operator priority of the extensions for incoming call The detail instruction explained below Caller ID Enable or Disable the Cal
5. SIPFESO 106 doc Microsoft Wordjeeeee 00 ON cay SIPFESO 106 3 You will enter the main page of the web configuration interface after you keyed in the username and password correctly see figure 3 ETETE English VoIP Multiport Gateway Model FXS 06 FXO 02 Primary function groups are listed on the left frame For sub groups please click each page on the right frame Copyright 2010 Welltech Computer Co Ltd All right reserved 7 bu WELLTECD WellGate 2626 User Manual EN V2 0 Device The following instructions will explain the configurations for setting up the WAN port of the WG2626 There are in total three methods of connections Static IP DHCP and PPPoE see figure 4 Device_WAN Setting VOIP EUn Engli VOIP Gateway M Static IP v DHCP fioaa3 255 255 0 0 na 10 1 1 254 The table shown below describes the configuration items for 3 connection types of network Static IP DHCP and PPPoE Copyright 2010 Welltech Computer Co Ltd All right reserved 8 far WELLTECI WellGate 2626 User Manual EN V2 0 Device __WAN Setting Item Description Static IP DHCP PPPoE Connected mode Select the connection method for the WAN port of the WG2626 you can choose the following vV vV vV Static IP DHCP PPPoE Current IP Address Show current IP address v Vv V DNS server mode Select the DNS behavior you can choose the following Auto
6. port number is 5060 Secondary SIP Proxy Server If you Enable the Secondary SIP Proxy Server please set the IP address Secondary SIP Proxy Port Specify the port number the default Copyright 2010 Welltech Computer Co Ltd All right reserved 19 bu WELLTECID WellGate 2626 User Manual EN V2 0 port number is 5060 Secondary SIP Domain Specify the secondary SIP Domain name Secondary Outbound Proxy Server Specify the IP address of Secondary Outbound Proxy Server Secondary Outbound Proxy Port Specify the port number the default port number is 5060 1 Press the Apply button at the bottom after you finish to save changes 2 Press the Reboot button to apply the changes IVR Greeting Uaa 1u 8k 8bits raw file IPAMZVS EERE Thank you for calling C Welcome pem EJ Upload _ Voice Format 711u 8k 8bits raw file In the Service_IVR Greeting section see figure 14 15 you can customize the IVR greeting prompts by uploading those files into Wellgate 2626 Greeting Type The default contents of greeting are shown below 1 Welcome Thank you for calling Copyright 2010 Welltech Computer Co Ltd All right reserved 20 fr WELLTEC 6 7 8 WellGate 2626 User Manual EN V2 0 Menu Please dial extension number or 9 for operator Busy The extension you dialed is busy No Answer
7. 723 1 G 729A In band and out of band DTMF relay Support SIP Register and Calling Support Backup SIP Proxy Server G 168 Echo Cancelation T 38 Fax Relay DTMF FSK Caller ID Detection and Generation Intelligent Call Routing Support Backup Route to PSTN when VOIP or Network is failed Support Emergency Call Through PSTN Provides Configurable Auto Attendant Service Support Direct Route to Operator Support Operator Hunting Based on Priority Support Operator Simultaneously Ringing Customizable Auto Attendant Greeting Call Transfer Call Hold Call Forward Environmental Operating Temp amp Humidity Temp OC 45 32 F 113 F Humidity 10 85 relative humidity non condensing AC Power Adaptor INPUT AC100V 240V 50 60Hz OUTPUT DC 12V 3 0A Default IP Address WAN IP 10 1 1 3 LAN IP 192 168 123 123 Ready To Run Default Settings Ti 21 T2 227 T3 23 default operator T4 24 T5 25 T6 26 All outgoing calls are route to PSTN automatically All incoming call is answered by Auto Attendant Press 9 for operator and for end of dialing Copyright 2010 Welltech Computer Co Ltd All right reserved far WELLTEC WellGate 2626 User Manual EN V2 0 Appearance 1 Front Panel LED Indicators far WELLTECD WellGate 2626 A T ay b hos on is wn os re ie Qe gah PE LPH LPP L1 T1 L2 T2 T3 T4 T5 T6 ee Cak io 6 ma J oI s ee a a a it LED Description Power When the power adapter is
8. Service_SIP Trunk wr O Operator Oves No Enable O Disable SIP Account Setting Copyright 2010 Welltech Computer Co Ltd All right reserved 18 far WELLTEC WellGate 2626 User Manual EN V2 0 Figure t3 In the Service_SIP Trunk section see figure 13 you have to set the SIP account for VOIP service SIP Trunk Setting SIP incoming Route Specify the SIP incoming call routing rule via IVR or direct to operator Route to Operator if IVR busy If you select IVR mode for SIP incoming call system will route the call to operator automatically when IVR is busy Set Yes to enable Set No to disable Secondary SIP Proxy Server Enable Disable Secondary SIP Proxy Server SIP Account Setting Line Number Specify the SIP line number This item is essential for VOIP service User ID Specify SIP account This item is essential for VOIP service Password Set password of SIP account This item is essential for VOIP service Primary SIP Proxy Server Specify the IP address This item is essential for VOIP service Primary SIP Proxy Port Specify the port number the default port number is 5060 This item is essential for VOIP service Primary SIP Domain Specify the Domain name Primary Outbound Proxy Server Specify the IP address Primary Outbound Proxy Port Specify the port number the default
9. The extension you dialed is no answer Error Sorry this extension number does not exist Transferring Please wait Bye Please try later thank you Hold Play Music If you want to change the contents please be sure the voice format is 711u 8k 8bits raw file Upload file If you want to upload the greeting file please select the greeting type specify the file path and file name and then click the Upload icon 1 Press the Reboot button to apply the changes Copyright 2010 Welltech Computer Co Ltd All right reserved 21 thu WELLTEC R Service_Status WellGate 2626 User Manual EN V2 0 ELTTI English Static IP 10113 255 255 0 0 10 1 1 254 168 95 1 1 168 95 1 2 00 01 A8 06 3B C0 BOOT_20100316a WG26_2dsp_6fxs_2fxo 108 FXO zr Idle FXS 21 Idle FXO Idle FXS 22 Idle FXS 23 Idle FXS 24 Idle FXS 25 Idle FXS 26 Idle In the Service_Status section see figure 16 Display the status of Network S W version and line Network Status Connection mode Displays the current connection mode Current IP address Displays the current IP address of the WAN port Subnet mask Displays the current subnet mask s IP Default gateway Displays the current default gateway s IP Primary DNS address Displays the current primary DNS address Second DNS address Displays the current secondary DNS address
10. UNCONDITIONAL BUSY NO ANSWER BUSY NO ANSWER VV V V Forward TEL Specify the forward extension number 1 Press the Apply button at the bottom after you finish to save changes 2 Press the Reboot button to apply the changes Service_PSTN Line VOIR Gateway VOIPGA EUr English L Device se PSTN Line Setting e MR Operator OYes No Select Country m Jeo Copyright 2010 Welltech Computer Co Ltd All right reserved 17 brwi WellGate 2626 User Manual EN V2 0 In the Service _PSTN Line section see figure 12 you can define the routing rule of incoming outgoing PSTN call the detail information please refer to the table below PSTN Line Setting PSTN incoming Route Specify the PSTN incoming call routing rule via IVR or direct to operator PSTN Call Notice If you Select Yes system will send a PSTN call notice tone before dialing when the SIP trunk Ethernet is fail Select No this feature will be disabled Disconnect Tone Country Template Specify the location of WG2626 Click the Use icon when you select the correct country System will use the selected country s PSTN tone to become the active value You can modify it if necessary 1 Press the Apply button at the bottom after you finish to save changes 2 Press the Reboot button to apply the changes
11. a a a eiitcante lees 15 Service_Preference ae ene ee ee Rr OEE een eee SPREE Sere eee Sere re renee ae 15 Service _Extension LiNE access oes ce ese oa acide ncn asain bated cbc ee eee ta 16 Serice PSIN LINE neresine R a aa E ia ain 17 SOMES P TUNK me aa E E Remon ENE 18 AREE E mmm Torneo nee NeT Mey eRE nomemt ty SeceL Ine Ie mOrt t Peeent Paneer weer en 20 Service STATUS eee am see oe ee tee Orel te Nn E eect inte ee ia 22 Advanced COMPIGUPANION pace cacsecssiasonesnecseanitietatshearasadendseraniviranesaanieaimniomess 24 Advanced COnMGUrATOn COR SUTING aca siesseiceas seeteosuasaedleasncanuavetelesinadacionte 24 Advanced Configuration_Speed Dial NUMBET ccscssssescseeeecsssseereesees 25 Advanced Configuration_Digit Manipulation EditOr sse ssssssssesseriesresesereee 26 Advanced Configuration_Dial PION sd wsssadsanconvdesnsacassadeovvieassaveantateseoaseuayoatensoeng 28 Manageme N t uiris eren a E E a aa a 30 Management_Backup Restore Se TiC etc tacetediteccetacatsentcitcere ee cecscedereetacereneslactes 30 Management_Upgrade FINI WO 6 oe c020 552 siee esate anccerrdat eater aaedeeeenneeedaioae 30 Management_Reset to TO arate cates cticet concn esaprcstencatiehatasseteatennnidecaniea Geetitate 32 Copyright 2010 Welltech Computer Co Ltd All right reserved 1 far WELLTEC WellGate 2626 User Manual EN V2 0 Introduction WellGate 2626 An Easy to Use PBX Gateway Wellgate 2626 is a plug and play PBX gateway for SO
12. connected the LED will light up green Ready The LED will light up green after system initialized Proxy When the gateway is registered successfully to a Proxy this LED will light up green WAN This LED will light up green when the gateway s WAN port is physically connected to the public internet When data is transmitted through this port it will flash green The default IP of WAN port is 10 1 1 3 LAN 1 LAN4 The respective LED will light up green when the relative LAN port is physically connected to a local network When data is transmitted through this port it will flash green The default IP of LAN port is 192 168 123 123 L1 The status LED for FXO port 1 this will light up amber orange when the port is in used It will flash amber orange when there is no connection with PSTN Ti The status LED for FXS port 1 this will light up amber orange when the connected phone s handset is off hook or when the connected phone is engaged in a conversation It will flash amber orange when there is an incoming call L2 The status LED for FXO port 2 this will light up amber orange when the port is in used It will flash amber orange when there is no connection with PSTN T2 T6 The status LED for FXS port 2 6 the respective LED will light up amber orange when the connected phone s handset is off hook or when the connected phone is engaged in a conversation It will flash amber orange when there is an incoming ca
13. HO and small office user which provides 2 PSTN lines 6 Extension and SIP Calls together It can work stand along without any network connection just power on and use it Also it becomes a small and simple IP PBX when you enable the SIP service With enabling built in auto attendant Wellgate 2626 can guide the caller from both VOIP and PSTN to reach the extension automatically Or the incoming call can be routed to the predefined operation when disable the auto attendant service For emergency call e g 911 Wellgate 2626 can be configured to route through PSTN instead of VOIP to meet different country s legal requirements When the power is lost or Wellgate 2626 is malfunction the bypass feature will ensure the PSTN lines can still be reached Physical Interface Ethernet port RJ 45 10 100 base T 1 WAN port for connect to router ADSL modem ATU R or switch hub directly 4 LAN port for PC or other network devices connecting Telephony port RJ 11 2 FXO Ports to connect with PSTN Line 6 FXS ports as PABX Extension Line to connect with analog phone Reset button Factory Default AC power Jack Status indicated LED Indicates Ethernet FXO FXS and SIP system status Features Support Stand Along Working without Network Connection Ready to Run Default Settings Copyright 2010 Welltech Computer Co Ltd All right reserved 2 far WELLTECI WellGate 2626 User Manual EN V2 0 SIP RFC 3261 Compliance Audio Codec G 711 G
14. e number that will be immediately dialed out without having to press the at the end of the dialed number on the keypad or until the dial time timeout period The number can be specified depending on the length of the dialed number or the prefix of the dialed number For example if the user sets First Example Function Enable Leading digit 02 Total Digit count 10 If the user dials a 10 digit number with a prefix of 02 e g 0282265699 the WELLGATE 26XX will immediately detect it and dial this number straight away Second Example Function Enable Leading digit Total digit count 8 If the user dials an 8 digit number e g 82265699 the WELLGATE 26XX will immediately detect it and dial this number straight away Third Example Copyright 2010 Welltech Computer Co Ltd All right reserved 28 fr WELLTEC WellGate 2626 User Manual EN V2 0 Function Disable Leading digit 02 Total digit count 10 If the user set the Function parameter as Disable the call number with a length of 10 digits and a prefix of 02 will proceed as normal The user will need to wait until dial timeout period for the call to be made or press the on the keypad at the end of the dialing number to make the call You can configure up to 50 entries in the Dial Plan 1 Press the Apply button at the bottom after you finish to save changes 2 Press the Reboot
15. fh WELLTECH Welltech WellGate 2626 An Easy to Use PBX Gateway User Manual Copyright 2010 Welltech Computer Co Ltd All right reserved bur WELLTEC WellGate 2626 User Manual EN V2 0 Table of Contents IntrodUCt Ossin Mere CERO mete A or or Mee ERe ener emer rie Marts a Ree me Mee es 2 WellGate 2626 An Easy to Use PBX Gateway scccscessccscssessssseeeceeesecceceseecesesens 2 Physical IS LACES senisesse riiai iE ANE EEEE ESEE sias 2 Envronmenidl msee E A E tere fr mee ee 3 Default IP AdA rESS riitansa A un ae 3 Ready To Run Default Settings a0tanceceentan ne eeeraeae ee 3 POA NS oea a E E E E E E 4 Environment Setup and IP Connection ou cc ccccccccssesscsesseescseeseeecsecsececseeseeecseeseeseseeseenes 6 CONNOUrANO a Pememeeee erie eeeeh pee eco pra rere bret ber mr er te cere or kar wert ieeteean arte one Eee 6 BEAU 6 lt a eee nee eee een Re oe ere REN eR Cem eee Meer RATS enor Ameen em eRe ame eer 8 Device _WAN SU UIIG o s asecesesssseetcigansaavesstotaadunsoudbansoevosinalaatanssadntainentecaunniglianacsaanetoas aeons 8 Device WAN Setting Static IP ccoisnnscnsanesnaadeerenietuasveaueussntantecedaeonseaiccesaasesacneeees 12 Device WAN Setting DHCP a carstisctiescatuawiensaaesiudnenrvtasseansenancntecuntesysaadaaonstdsonuducnincents 13 Device WAN Setting PPPOoE cisciasssntectasceausinaandeannateanencseiesmaiwuiceniencastaslntena eames 13 Device Logi oee aa E A E A E E E EE 14 SEVICE oeiee e R E E acl a
16. hat it was successful see figure below Note For consistency it is recommended to reload default setting every time you update the firmware on the WELLGATE 2626 However you will lose all the settings configured on the WELLGATE 2626 except Network configuration For more details on reload default setting please refer to the next page below Copyright 2010 Welltech Computer Co Ltd All right reserved 31 bu WELLTEC WellGate 2626 User Manual EN V2 0 Management_Reset to Default VOIP Gateway YO Ei EF gt Backup Restore Setting Reset to Default Users can restore back to factory default settings using this feature see figure 19 The password of the account and the network configurations are the things that will not be changed when this feature is executed Rebooting the system VOIP Gateway VOIRIGa Executing this function will reboot the whole system when configuration changes are made to the device it needs to be rebooted for the changes to take effect see figure 20 Copyright 2010 Welltech Computer Co Ltd All right reserved 32
17. host disconnection When the remote host PPPoE fails the gateway will retry 3 times to reconnect if there is no reply from the remote host within 3 tries then the gateway will reboot You can Enable Disable this option MTU It is used to specify the max transmission unit when using PPPoE The default value is 1492 and it could be smaller is you are encounter the PPPoE connecting issues Copyright 2010 Welltech Computer Co Ltd All right reserved hu WELLTECH WellGate 2626 User Manual EN V2 0 Device_WAN Setting Static IP VOIP Gateway ETETEA English Static IP v 10113 168 9511 168 95 192 1 Auto 80 443 HTTP w Static IP IP address 10113 ws25500 Default gateway 10 1 1 254 1 When you select the Static IP mode please Specify the marked item shown as the figure 5 2 Press the Apply button at the bottom after you finish to save changes VOIP Gateway o VOIPIGa It will take some time to reboot Please reload web page after that 3 Press the Reboot button to apply the changes see figure 6 Copyright 2010 Welltech Computer Co Ltd All right reserved 12 hu WELLTEC WellGate 2626 User Manual EN V2 0 Device_WAN Setting DHCP ETT IETE English 1 Ifyou select the DHCP mode please Specify the marked item sh
18. ion Login to the WG2626 web configuration menu 1 Get an Ethernet Cable to connect your PC and WG2626 with LAN 1 port then the DHCP server of WG2626 LAN will assign IP address 192 168 123 1 for your PC 2 Open your WEB browser and key in the IP address of the gateway http 192 168 123 123 in the Address box see figure 1 Z Google Microsoft Internet Explorer BAE BRO RHO RAD RREA IAM HAU EJ QOQ O HAGD Hx ka 2 a ga Tre ESSE 5 ALD Ctpsni92 168 123 123 gt Bee e A gt eee Disks Web Images Video News Maps Gmail more iGoogle Sign in Google _ a z Preferences Google Search I I m Feeling Lucky Language Tools Advertising Programs Business Solutions About Google Go to Google Taiwan Make Google Your Homepage 2007 Google Al D eee Copyright 2010 Welltech Computer Co Ltd All right reserved 6 bu WELLTECIP WellGate 2626 User Manual EN V2 0 3 You will see a pop up window requesting username and password before you can login to the web configuration menu Username is root while password is blank see figure 2 2 Google Microsoft Internet Explorer BOR R Or O R BOn km O2 8 808 BALD B http 192 168 123 123 E M E seach 90 Q ppv Web Images Video News Maps Gmail more iGoogle Sign in VolP Gateway Configuration Web Server ERZAN G root EEO Di ittseneiR th E EER B ABA hittp 192 168 123 123
19. ler ID Sending to Telephone Set You have to use Caller ID phone in order to display the caller information If unsure please set to Disable Caller ID Type Specify the caller ID Type of your phone set DTMF FSK Bellcore ETSI Before Ring or ETSI Between Ring Operator Ring Mode Specify the Operator Ring Mode 1 Priority Ring The operator will be hunted based on the priority defined in extension If the higher priority s extension is busy the call will automatically hunt to second one and so on 2 Simultaneous Ring Parallel Ring all priority of operators extension exclude those extension s operator set to NA Ring Time Specify ring time 5 60 sec It is used for priority hunting which define how Copyright 2010 Welltech Computer Co Ltd All right reserved 16 fin WELLTECID WellGate 2626 User Manual EN V2 0 long the system will think the ringing operator is not able to take the call and hunt to next The default value is 20 to 40 seconds Operator Short Code Specify the short code of Operator eg 9 or 0 The default value is 9 TEL 1 TEL6 Line Number Specify the extension number Operator Specify the Operator priority of incoming call you can set the priority from 1 to 6 or NA for extension TEL1 and TEL2 are the default operators Forward Condition Specify the extensions forward condition you can choose the following gt Disable
20. ll Copyright 2010 Welltech Computer Co Ltd All right reserved fr WELLTEC WellGate 2626 User Manual EN V2 0 2 Rear Panel LED Indicators WAN LAN4 LAN3 LAN2 LAN1 Item Description Reset Press and hold over 5 seconds to reload factory default setting this will erase all the settings configured on the gateway T6 T2 The RJ 11 FXS port 6 2 connects analog phone sets L2 The RJ 11 FXO port 2 connects PSTN line T1 The RJ 11 FXS port 1 connects analog phone sets Li The RJ 11 FXO port 1 connects PSTN line LAN 4 1 10 100 Base T RJ 45 socket for LAN port 4 1 connect to local area network WAN 10 100 Base T RJ 45 socket for WAN port connects to wide area network DC 12V The power socket input AC 100V 120V output DC12V L1 T1 and L2 T2 is a bypass pair When power is lost or Wellgate 2626 is malfunction L1 s PSTN will directly bypass to T1 and L2 will bypass to T2 Copyright 2010 Welltech Computer Co Ltd All right reserved 5 fur WELLTEC WellGate 2626 User Manual EN V2 0 Environment Setup and IP Connection Please make sure that the network interface of your computer is working fine and the cross over line RJ 45 is connected to the computer correctly The WG2626 by default uses DHCP for its LAN port and assigns IP addresses to clients connected to it please make sure that your PC or Notebook s network configuration is set to DHCP Configurat
21. other 1 32 are the length to be matched longest as a condition Start Pos The start position to be replaced Stop Pos The stop position to be replaced Replace Value The value to replace Example prefix Min Start Stop Replace Test DNIS Result DNIS Len pos pos Value 886 0 0 0 002 8862123456 0028862123456 886 12 0 0 002 8862123456 8862123456 886 0 2 5 002 8862123456 8800223456 886 0 30 30 002 8862123456 8862123456002 886 0 1 6 8862123456 83456 Note The DM Group 1 4 can have the feature to delay the dialing by added a WA p into the replace value It might be useful if you want to wait for a while and Copyright 2010 Welltech Computer Co Ltd All right reserved 26 far WELLTEC WellGate 2626 User Manual EN V2 0 dial the second part of DTMF for calling out Each p represents 2 seconds delay For example 822265699ppp1234 it will first dial 82265699 and wait to 6 sec to dial 1234 1 Press the Apply button at the bottom after you finish to save changes 2 Press the Reboot button to apply the changes Copyright 2010 Welltech Computer Co Ltd All right reserved 27 fh WELLTEC WellGate 2626 User Manual EN V2 0 Advanced Configuration_Dial Plan ZO tt Chitayyeny VOIPIGA OO l A H Device E Service E Advanced Configuration es b Dial Plan Editor Using this feature users can specify th
22. own as the figure 7 2 Press the Apply button at the bottom after you finish to save changes Press the Reboot button to apply the changes Device_WAN Setting PPPoE ETTET EA English 1 When you select the PPPoE mode please Specify the marked item shown as the figure 8 2 Press the Apply button at the bottom after you finish to save changes 3 Press the CANCEL button next to the Apply button to clear the values in the page 4 Press the Reboot button to apply the changes Copyright 2010 Welltech Computer Co Ltd All right reserved 13 bu WELLTECD WellGate 2626 User Manual EN V2 0 YO Ed CF Device_Login Administrator The administrator level user which has full access of WG26xx Supervisor Setting The supervisor level user which has limited administrative access right User The user access right which only allows to setting some user related features Copyright 2010 Welltech Computer Co Ltd All right reserved 14 fh WELLTECD WellGate 2626 User Manual EN V2 0 Service To initial the VoIP service you will need a SIP account provided by the SIP Proxy you are registered with To configure the relevant SIP settings please refer to the instructions step by step Service Preference ZO Es Critoyyeny VOIF Ga Hy Devic
23. up outgoing call type could be FXO FXS VOIP which require being different as the same type of primary route DM Group The DM group here can be used as the DM after routing rule was selected It is useful especially when you have different dialing plan for backup route Copyright 2010 Welltech Computer Co Ltd All right reserved 24 bu WELLTECH WellGate 2626 User Manual EN V2 0 Advanced Configuration_Speed Dial Number VOIP Gateway VOIP G Speed Dial Editor Speed Dial Editor Specify the speed Dial Number Telephone Number Name then press the Add or Del button to add or delete record Copyright 2010 Welltech Computer Co Ltd All right reserved 25 fr WELLTECH WellGate 2626 User Manual EN V2 0 Advanced Configuration_Digit Manipulation Editor ii Device Ln Service Gateway FXO IN FXS IN Add VolP IN Group 1 OUT Group 2 OUT Group 3 OUT Group 4 OUT FXO IN Digit Manipulation Editor FXO This DM group is used for FXO incoming call FXS This DM group is used for FXS dialing out VOIP This DM group is used for VOIP incoming call 1 4 These DM groups can be used for routing table Matched Prefix The prefix to be matched length for DM The longest prefix will be matched first Matched min Length Set to 0 for ignoring the length The
Download Pdf Manuals
Related Search