Linux Platforms Zen Vault Professional User Guide
Contents
1. Mail settings To ladmin yourdomaincom iY From backupiirourdomain com SMTP server smtp yourdomain com My SMTP server requires authentication of the message is displayed below the text box Supply the To and From e mail addresses and the SMTP server address and authentication settings if needed You can specify whether the backup log must be included in the e mail Choose between the Summary warnings and errors or the Entire log file as specified in the Advance Options Log level setting Attach log File Click on Test to verify that the settings are correct A Attachment settings message will confirm if the e mail was sent successfully w Summary warnings and errors Entire log file as per Advanced Options log level setting Click on OK to remove the message and OK again to Ok Cancel The Report plug in is now activated and will start e mailing reports during the next backup close the Notification settings window Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 6 Security Online data backup uses a combination of Blowfish encryption and SSL secure data transmission to ensure the safety of your data When the Backup Client has to transfer data to the Storage Platform it connects using a secure SSL 1024 bit2. access permissions to use their Storage Platform User Access Management Pert 051 disable this checkbox Storage Platform administrators will not have remote Bind to m AE avaiable IP addresses access lad Allow custom access Specify the port number the default port is 9091 that must be used for Remote din Management If the server has multiple IP addresses available you can specify whether the Remote Service must bind to All or Only to one IP by specifying the address in the textbox Enable the Allow custom access option and supply a username and password if you do not want to make use of the above mentioned Storage Platform Access Accounts This custom access username and password must be specified in the Storage Platform Console to gain remote access Click Ok to save you settings After the service has been restarted click on Ok to close the window 4 4 3 Health Check The Backup Client Health Check provides information to pre emptively highlight possible issues for example free disk space problems or SE service access rights to files and folders It can also provide the estimated line speed to the Storage Platform Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 Five sections are available e Memory o Memory utilisation statistics from the last
3. 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 conflicts reported in the plugins folder during the upgrade procedure uninstall the reported plug in by using the rom u command in the plugins folder e g rpm u a5backup plugin report Note All plug in settings will have to be reconfigured after the upgrade 2 3 Zen Vault Professional Uninstall Instructions To uninstall the Zen Vault Professional Backup Client you must remove all settings as specified in the setup script mentioned in the previous section There are five commands that must be initiated Please ensure that you have root access when uninstalling the Backup Client If the GUI is open close it and run the following commands e rm f usr bin abbackup e rm f usr bin abbackup cli e rm f usr bin abbackup gui e Im f etc init d abbackupd And then e rm R usr share abbackup to remove the a5backup install directory Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 L IN 3 The Setup Wizard When you open the Backup Client interface for the first time the Setup Wizard will start automatically You need to create an account for the Client on the Storage Platform before you can run any backups Step 1 of 6 If you are installing the software for the fi
4. 2 Installing the Zen Vault Professional Backup Client Ensure you are logged in as root Two file versions are available one for the i386 platform and one for any other platform where the JRE is installed Copy the supplied A5 BP SE LINUX lt version gt rmp file to a local directory Execute the command rpm i A5 BP SE LINUX lt version gt rpm to install the Zen Vault Professional backup client During the installation process the installer will verify that Java is installed and the necessary scripts will automatically be modified with the Java install location The Zen Vault Professional daemon will also be installed and started To verify that the Zen Vault Professional daemon is running execute etc init d abbackupd status from a terminal window To restart or stop the daemon use the above mentioned command but replace status with start or stop Run the command a5backup gui to open the Backup Client interface The Setup Wizard will automatically open You can also start the Command Line interface by executing abbackup cli A list of the available CLI commands will be displayed Upgrading to a newer version SE backup clients can automatically be upgraded during the backup process if it is enabled in the Storage Platform To manually upgrade SE to a newer version use the rpm u lt filename gt rom command If there are any Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel
5. Deselect Folder from the selection list To exclude a file or folder If an entire folder is included but you want to exclude a particular file or subfolder right click on the file or folder and select Exclude Excluded items are displayed with amp red icons or E red folders Folders that have been selected but have some files or subfolders excluded are green with a red IF tint To verify the size of your backup select Calculate Size from the File menu or click on the Size button in the toolbar If your backup set is larger than your allocated limit you have to reduce the size of your selection To remove files right click on a file that you want to exclude and click on Deselect Alternatively you can ask your backup administrator to upgrade your account limit Note The Backup Client compares your backup account size with the size of your backup selection at the beginning of the backup process The backup process will stop and an error message will be displayed if the selection size is over your account limit If you do not want to wait for the next automated backup you can select Backup Now from the File menu to manually start the backup process Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 4 1 2 Filters You can use filters to automate the file selection of particular file
6. HOO wWadiesday rise Note Friday sod a If you do not schedule any backups you will have to manually Backup tine f i backup your data We strongly recommend that you run oue se u ex automated backups Step 5 of 6 If you have limited space on the drive where the Backup Client is installed you can move the Cache Logs Temporary folders and the selection database to another location Note Always keep these folders and the selection database on the same arive volume Step 6 of 6 Confirm your accounk settings i l j i x eR eee f Lue Confirm that the information you supplied is correct and click punesy Next You hanes enibened the Following information Backups Username File and Print 2 Commechion method Local Area Nebwork Automatic backups Bschun day ot OH The Backup Client will connect to the Storage Platform and so Meis configure your account A message will be displayed to confirm that your account was created successfully Click OK to close the message box Next you must select files and folders to create your selection list ue mk uet cem Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 3 1 Zen Vault Professional Auto Update As from v4 1 the Backup Client will automatically receive software upgrades during the
7. RSA key exchange 128 bit RCA stream cipher and SHA 1 integrity checking connection to transfer the data Signed SSL certificates and Certificate Revocation Lists CRLs are used to verify server integrity Data is stored using 448 bit Blowfish encryption to encode the data on the Server This is considerably greater than the encryption used for Internet banking and online credit card transactions Your encryption key is seen as a passphrase by the Storage Platform A random encryption key is automatically generated when any account is created and this random key and not the passphrase specified by you is used to encrypt your files The encryption key is protected by the passphrase your encryption key and without this passphrase you cannot decode the actual encryption key When you change the encryption key in the Backup Client the actual key is decrypted and re encrypted with the new passphrase The data is never touched All data since the initial backup is encrypted with the same random encryption key even when the passphrase is changed If you change your encryption key you do not have to remember the previous encryption keys for future restores the Backup Client will be able to retrieve the data from the Storage Platform Your encryption key is not stored anywhere on the Storage Platform and is only known to you If you forget this encryption key it will render your data unrecoverable Security standards and techniques employed
8. and folders Open the Restore tab From this tab you can gain access to your backed up files Your latest backup is shown in the Last Backup folder If you expand the Previous Backups folder the Backup Client will connect to the Storage Platform and retrieve a list of all previous backup dates Select the files and or folders you want to restore To select a single file right click on the file and click on Select or you can click in the box next to the file To select an entire folder right click on the folder and then choose Select folder Selected files are displayed with green icons To start the restore process select Restore from the File menu or click on the Restore button in the toolbar Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 Note Automatic backups are disabled during the restore process The Backup Client will prompt for a restore location to where the file s must be restored If you select Original location the files will automatically be restored to the same location from where they were backed up Note If you choose this option the restored files will overwrite any existing files with the same name in that location You will be warned before the Backup Client overwrites any files If you do not want to overwrite the current copy of these files s
9. backup as well as overall memory usage to date e Data Protected o Information includes the number of files and directories selected for backup e Disk Usage o Free space availability for all local drives e Line Speed o Line Speed estimate to the FileServer by transmitting data for 10 seconds e Service Rights o Information about the service account name and access rights to the working folders You can decide which checks you want to run by enabling disabling the checkboxes next to the entries Use the Show Last Health Check button to see the last report You have the option either Print or Export the Health Check reports 4 4 4 Command Line Backup and Restore You can use the command line interface to remotely run the Setup Wizard enable SE Remote Management and to send a wide range of backup and restore commands to any Server Edition backup client in your organisation Note The SE Backup Client is required and must be installed on the computer from where you want to use the command line interface Remote Management must be enabled in the Backup Client and a username and password set for any commands to work Run adbackup cli configure account remote to run the Setup Wizard or to enable Remote Management in the Backup Client You can also specify the host address with the h command See examples below Usage a5backup cli u user p password restore dates status backup cancel h host pt port rd restoredateidx rp res
10. backup process should there be an update available on the Storage Platform and if Auto update is enabled for the particular Group in the Storage Platform Console Nothing needs to be configured in the Backup Client Note After an auto update you must restart the Backup Client GUI before the new version will be visible You are advised to keep the GUI closed when not used Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 4 Backup Client IN Online Data Backup keeps your most valued data secure It allows you to select files and initiate backups and to restore lost or corrupted files You can also find and restore files from previous backups and schedule automatic backups 8 Attix 5 Backup Professional SE File Selection Tools Help E My Computer BLS cC EH Attix5 EN ASBPIS F cache images K Java IF logs WO plugins CJ toBackup E Activations Applications T Documents I Enhancements IJ Images W Log nalyzer I Projects W Documents and Settings EF Downloads Program Files RECYCLER I System Volume Information IF Test I WINDOWS Le y Ec HE HH UER RE okor P Ior E Por EE EOE EOR Por po Filename advanced html advschedule html b5 css connection html encryption html FilEers hErml kevchange html mainkeychange html mainmenu
11. connection Proxy Server Enable the Use a proxy server for you network or dial up connection checkbox if you connect to the Internet via a proxy server and supply the necessary information 4 3 3 Backup Schedule The Backup Client can be scheduled to backup your selected files and folders automatically Note that if you configure the Backup Client to backup at night the server must be powered but you do not have to be logged in The backup schedule can be changed by selecting Automatic Backups from the Tools menu or by clicking on the Automate button in the toolbar Use the Daily Automatic Backups section to configure a once off daily backup The Advanced Schedule can be used to specify hourly backups Backup logs can be viewed in the Logs tab Backup entries are marked in blue Note You are advised not to disable automatic backups as you will then have to manually backup your files 4 3 4 Disk Usage rs Working Folders ae eal PEE DUO T i C Bap schede Working Folders If you have limited space on the drive where the Backup Client is Performance and Limits You can move the Cache Log Temporary folders and the Selection Database System Filters to another location if there is limited space available on the drive where the E C dlobal Exclusions Backup Clent is installed installed you can move the Cache Logs Temporary folders and Advanced Options Note Always keep these folders on the same drivejvolume Pat
12. csencccnieduaeszacadnciieciu saumuonsiovedawdaeaiieneonceaeausaenseanaraweaasancteeate sculadeduaensaete E EE RRE 23 MED ZUDEM EE m t 28 5 1 BS i MIO UMC zi 9 a E AT E E E o E E T E E A T T 28 O CC a E E EE A E E EE E E E E E 30 6 1 Blows m ENGDI O d NET ETE E E rp Eae ea EEr E ea ERa 30 6 2 SoL COMMUNIC ANO wegung a A E e s 30 Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 1 Introduction Congratulations on choosing online data backup We believe you will find it to be the most secure scalable and efficient solution in addressing the business risk associated with the protection of critical data in a distributed environment If you experience any difficulty during the installation of this service please don t hesitate to contact us on 0845 058 9000 Our Zen Vault Professional service is a remote storage solution that utilises client server architecture to securely replicate data from the client device to a central data server Data is compressed to minimise bandwidth utilisation and transferred using a secure SSL connection to the Storage Platform Data is stored in an encrypted format using an encryption key known only to you Online data backup minimises risk maximises productivity and allows businesses to regain control of t
13. done unless your encryption key was compromised Security Settings The Security window allows you to select whether the Backup Client should remember the backup account password when running a backup or a restore There are three options available e Remember password for backup and restore o The Backup Client remembers the user password when doing a backup or restore This is the default setting e Prompt for password on restore o The Backup Client prompts for the user password during the restore process e Prompt for password to open the backup client and to restore o Use this option to enable access control The Backup Account password must be supplied before you will be able to open the backup client to change the backup selection or any of the application settings Backups will continue as normal Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 IN 4 3 2 Connections Connection Settings In this section you can change the connection that the Backup Client must use to connect to the Storage Platform You can choose between a network permanent or dial up connection The Dial up Settings button is enabled if you select the Dial up option Click on this button to select an existing dial up connection configured on the computer and supply the username and password for that Internet
14. htrl mainpasschange html outlook tml passchange hkml perflirn html profiling Atm restore html resume html schedule html search html security Atm select html shutdown Atrial snapshot html whaksnew html Ready Last backup 2005 07 14 Status Successful powered by ATTIX 1 KB 22 04 2004 01 06 PM 1 KB 27 01 2005 07 36 PM 1 KB 27 01 2005 07 36 PM 1 KB 22 04 2004 01 06 PM 2z KB 27 01 2005 07 36 PM z KB 27 01 2005 07 36 PM LEB 27 01 2005 07 36 PM 1 KB 22 04 2004 01 06 PM 4 KB 27 01 2005 07 36 PM 1 KB 22 04 2004 01 06 PM 1 KB 27 01 2005 07 36 PM 1 KB 27 01 2005 07 36 PM 2 KB 27 01 2005 07 36 PM 1 KB 27 01 2005 07 36 PM 3 KB 27 01 2005 07 36 PM 1 KB 27 01 2005 07 36 PM 1 KB 27 01 2005 07 36 PM 2z KB 27 01 2005 07 36 PM KE 22 04 2004 01 06 PM SEB 27 01 2005 07 36 PM 1 KB 27 01 2005 07 36 PM 1 KB 27 01 2005 07 36 PM 1 KB 22 04 2004 01 06 PM O x While you are using the Backup Client you may select Help from the Help menu should you require any help This additional windowpane on the right of the window above will guide you through the operation of the Backup Client 4 1 How to Backup The next sections describe how to select files and folders for backup how to add filters to folders to automate the file selection of certain file tyoes and how to backup your files to the Storage Platform Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Zen
15. specific filter s that you want to remove 4 1 3 Profiled Sections You may notice another group of icons in the Backup Client Dynamic Profiling selections which can be specified by the Backup Administrator are displayed with the following images for file inclusions for filtered inclusions and for excluded files On folder level the images are L for included folders for filtered folders and L for excluded folders 4 1 4 Manual Backups After you have selected the files and folders for backup you can manually initiate the backup process by selecting Backup Now from the File menu or by clicking on the Backup button in the toolbar You may close the Backup Client after you have started the backup process by clicking Hide This will not cancel the backup process and you can at any stage open the Backup Client to view the progress of the backup You can also monitor the backup progress by right clicking on the system tray icon and selecting Monitor Progress Backup log information can be viewed in the Logs tab Backup entries are displayed in blue Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 Note The backup selection list is automatically saved every 30 seconds Right clicking on the SE Runner and selecting Backup Now will not backup any files selected within the
16. will require additional processing Note that old copies are Fics larger then 1024 MB periodically flushed from the cache refer to the Disk o ether Condor eed both conditions Usage section for more information e Fos with thoro extendens dx Binary Patching is enabled by default and nothing needs to be configured in this tab for normal use e Enable patching limits o It is possible that a file is modified in such a way that it becomes unfeasible to patch it An example would be a database that is re indexed In such a case the patching can take extremely long it may exceed your backup window and will eventually create a patch that is the same size as the complete file It is better to abort the patching and rather just compress Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 the new file and transfer it to the Storage Platform The patching limit allows you to specify when the backup client will decide to rather abort the patch and send a full copy of the file To specify patching limits enable the checkbox next to Enable patching limits and specify the amount of consecutive blocks When this amount is reached patching will be aborted and the complete file will be compressed and resent to the Storage Platform Patching Limits should only be enabled if you h
17. IN Zen Internet Online Data Backup Zen Vault Professional for Linux Issue 2 0 08 Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 IN 1a Contents AUG ON ecg cet ss E 3 1 1 System ea IOI NSS ects aie ee cee Manes nad etiosUte demos cru cetexui dim a ENER A Ea sh eats UNE FE aN Rii 3 MNS TAM cei E E E E E EE A EA 5 2 1 dave Runtime Environment JME iciccscacegesoecendcacedsecsancweesncsiuesscgneceacse E N E 5 2 2 Installing the Zen Vault Professional Backup Client cccccccseeeeeeeceeeeeeeeeeeeeeeeeeeseeeseeeeeseeeeeeeeseaaeeeeeeeas 5 2 3 Zen Vault Professional Uninstall Instructions ccccccceceseeeeeceeseeeeeeeeeeeseeeeeeseegeeesseeeeeeseaueeeesaneeseseeseeesaees 6 3 o EI Ico mRP aR 7 3 1 Zen Vault Professional Auto Update cccccseeeccceccseseeeeeeseeeeeeeeeseeeeeeeesaeeseeeesseaseeeeesseaeeeeeessaaeeeeeessaeeeees 9 A 0 00 10 1 0 M 10 4 1 ae Redu ediow 10 4 2 ae Raa lc ciom 13 4 3 Options and SSNS ERIT TEE 16 4 4 Additional Ss STUNG S
18. Internet 2015 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk 4 1 1 Selecting files for backup To select files that you would like to backup click on the 5d Backup Selection tab The folder structure of your computer is displayed in the left hand pane If you click on a folder its contents will be displayed in the right hand pane Subfolders are only shown in the left hand pane Once a file or folder is selected for backup any changes additions or deletions to that file or folder are automatically backed up To select an individual file Browse to the individual file that you would like to backup In the right hand pane right click on the file and choose Select or click in the box next to the file A selected file is displayed with a green icon To deselect a file you can either click on the box again or right click on the file and Deselect it Folders that have some files selected are displayed with a green tint To select an entire folder Right click on the folder and select Include Folder You can also use the left mouse button to highlight the folder and then Include the folder from the Selection menu Included folders are displayed with a ia green folder All files in the included folder and its subfolders are now selected for backup Any changes made within this folder or its subfolders will automatically be included as well To deselect a folder right click on the folder name and select
19. _ Search file dates C Umit number of resuiks to 10 Tee e o Attix5 Backup ProFessional DL pdf 25 11 2004 a OtticS Bachup Professional Feabunes pdf 179 KB 12 05 2004 09 26 AM 25 11 2004 06 45 FM a Attix5 Bachup Professional Product Suite paf 110KB 12 05 2004 09 29 AM 25 11 2004 06 45 PM i AttixS Backup Professional 5E HovellietW are por 550 KB 11 05 2004 04 25 PM 25 11 2004 06 45 PM o Attix5 Esckup Professional 5E RemoteManagement pdf 289 KB 11 05 2004 05 35 PM 25 11 2004 06 45 PM a Altix5 Backup Prafessional SE WIN Plug ins pdf 731 KB 27 08 2004 04 16 PM 25 11 2004 06 45 PM a Attix5 Bachup Professional 5E WIN pdf 442 KB 10 05 2004 10 51 PM 25 11 2004 06 45 PM lt Attix5 Bachup Professional 5P Monitor pdf 271 KB 10j05 2004 02 02PM 25 11 2004 06 45 PM a Attix5 Bsckup Professional SP pd 680 KB OS OF 2004 0 25PM 25 11 2004 06 45 PM a AttixS Backup Professional WebAccess pdF 234 KB 10 05 2004 09 41PM 25 11 2004 06 45 PM a AttixS Backup Professional XML RPC pdf 132 KB 11 05 2004 04 53PM 25 11 2004 06 45 PM Restore Qo Heb L 20000020500 To search for files from previous backup sets enable the Search through previous backups on server checkbox File dates can also be specified and you can and limit the number of results that must be displayed Note The Backup Date is used if you enable Search file dates and not the file create or file modified dates To restore the lo
20. ave serious patching issues with large files Delta Blocking An alternative solution to determine the change between two versions of a file is Delta Blocking Note It is vital that you read through this section before enabling this option in your Backup Client The Delta Blocking process is significantly faster than Binary Patching and it does not require a complete copy of a file in the cache to calculate the patch only a footprint file The footprint files require very little free disk space as a single footprint file is only 0 0006 of the original file The patches are however much bigger than Binary patches so Delta Blocking should only be used if you backup to a local Storage Platform or if you have a very good Internet connection The Storage Platform also requires additional free hard disk space because of the larger patches Delta blocking patches are created by comparing blocks of data for any change since the last backup Enable the checkbox next to Enable Delta Blocking You can set the Delta Blocking file selection criteria in two ways either by file size or by file type Select the applicable condition s and supply the necessary information Both conditions can also be enabled by selecting both conditions and the and option Any recently changed files not matching these criteria will be patched using binary patching Note that some database files may not be suitable for binary patching since data is shif
21. by this online data backup service were audited by PricewaterhouseCoopers to ensure that sensitive corporate data remains safe from prying eyes when transferred over the Internet or stored on a server 6 1 Blowfish Encryption Blowfish is an encryption algorithm It is a symmetric block cipher which uses a variable length key from 32 bits to 448 bits Zen Vault Professional uses the maximum strength 448 bit key 6 2 SSL Communication The Secure Sockets Layer SSL is a commonly used protocol for managing the security of data transmission Zen Vault Professional makes use of the SSL protocol 1024 bit RSA key exchange 128 bit RC4 stream cipher and SHA 1 integrity checking for secure communication between the Backup Clients and the Storage Platform including data transmission Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015
22. cated files select them individually and then click on the Restore button Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 4 3 Options and Settings From this Tools menu item you can view and configure the primary Backup Client options and settings To open this section select Options from the Tools menu The various options and settings are grouped in the left hand pane according to their functions Note Please read through this section carefully before you change any of these settings Incorrect settings could cause serious problems or even stop the Backup Client from protecting your data 4 3 1 Account and Security Account Information This section displays your backup account information as it is configured in the Storage Platform You can use the Retrieve Settings button to update your account settings from the Storage Platform This tool is useful to verify that your account limit has been modified after requesting a change from your Backup Administrator or to update Backup Group Profiling settings Account Setup If you need to change your password or encryption key select either the Change Password or Change Encryption Key buttons Changing your encryption key involves intensive processing on the Storage Platform and may take several minutes It should therefore not be
23. ching Mandatory Patching Logging Temp Program Files AttixS Backup Professional SE toBackup Browse the selection database to another location The Temp folder is Cache lt Program Files AttixS Backup Professional SE cache Browse Logs C Program Files AttixS Backup Professional SE logs Browse used for tem porary workspace when the files are patched Database C Program Files AttixS Backup Professional SE Browse cache compressed and encrypted the Logs folder stores all backup and Changed files are compared to the previous version to only transmit patches The longer files are kept in the cache the better the chance of transmitting patches instead of Full copies restore logs and the Cache folder keeps a local compressed and Days to keep files in Cache j 20 Clear Cache encrypted copy of the selected files for a specified amount of days The selection database compares the latest backup 9 ewe selection with the previous backup to determine the changes Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 Note Always keep these folders and the selection database on the same drive If you move these folders and the database to a network share please ensure that the Backup C
24. conds should the connection be dropped This setting enables you to increase decrease the duration between the retries e Socket Timeout o The socket timeout is by default 60 seconds If the Backup Client is connected to the Storage Platform and there is no communications between the two this amount in seconds is the duration that the Backup Client will stay connected before dropping the connection 4 3 9 Patching Patching is the process by which only the differences in files are extracted to minimize the amount of data that has to be transferred to the Storage Platform There are two types of patching available binary patching the default and delta blocking Binary Patching D Account and Seourty Patching Connections Binary patching is the most effective form of patching It is C Bak up Schedule Bina y Parcing adh cis moc paa pere dried iy very CPU intensive but will deliver the smallest patches the Borage Patioen Ei Cretie patching ines The process is only possible if a complete copy of an older Abert patchy wher 3p comece non eabching IMB blocks i ere far version of the file is available in the cache Furthermore the Doha Blocking Dea Bladang s Faster than Beary Patching and does not mad a patch must be applied to the file in the local cache which congiete copy of the Fle n the cache N wi nossmen create larger patches and therefore use Wore dr space on Pe Sorage Matton 2 trek Dea biodro fer
25. dbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 IN 1a change to a and if you include the entire share it will change to a A green image Excluded network volumes are marked with a red network images Without the correct permissions the Backup Client may still be able to display the files on the share but it will not be able to access these files during the backup process You will see a message Volume fileserver documents is not available for backup in the log file if the Backup Client cannot access these files You can remove a network volume from the Backup Client by right clicking on the entry in the left hand pane and then selecting Remove Network Volume 4 4 2 Remote Management Remote Management enables you to remotely access and configure the Backup Client from the Storage Platform Console 3 Remate Management Settings ES To enable this feature select Remote Management from the Tools menu and Server Edin Remote Management enables you bo ESI EOD TTA RO E ae enable the checkbox next to Enable Remote Management The Allow SP From the Storage Platform Conse controlled access option enables backup administrators with the correct i Ersables Remote Management Remute Management Services a7 Allow SP controled access username and password to connect to and administer this Backup Client If you
26. efore all your files are backed up to the Storage Platform This feature is especially useful if you have a poor Internet connection and you encounter problems with transferring large backups e Backup cycle o The Backup Client can be configured to cycle the backup process until all selected data has been transferred to the Storage Platform by automatically initiating subsequent backups This setting can only be enabled if a backup size restriction has been specified 4 3 6 System Filters System Exclusion Filter The System Exclusions Filter enables you to specify any file types that you want to exclude from the backup selection list For example to exclude all MP3 and AVI files specify mp3 avi in the text box Separate entries with a semicolon You can also exclude files by enabling the Do not back up files older than checkbox and specifying a date Note that the Date Exclusions Filter uses the file modify date as reference and not the file create date No Compression Filter Compression is not effective on all file tyoes as some files may already be compressed or cannot be compressed at all The Backup Client could spend some time and processing usage to try and compress these files This filter enables you to specify a list of file extensions that must not be compressed during the backup process The list of file types already specified are tyoes known for not compressing well 4 3 7 Global Exclusions Backup Professional enab
27. elect the Folder option The default path is a Restore subdirectory in your user account home folder You can also Browse to another folder if you want to restore the files to a different location Restore Options Explanation By default the folder structure is recreated in the restore folder If you want all files to be restored to one location uncheck the Recreate folder structure option Note If you are restoring files from different folders with the same filename you must recreate the Recreate directory structure folder structure or they will overwrite each other You can choose whether empty folders must be created if the Recreate directory structure Restore empty folders Zu option is enabled mE Enable this option if you do not want the Backup Client to prompt you before overwriting an Overwrite files EM existing file Tick the Use compression option to enable compression With this setting enabled the Storage Platform will compress the files before transferring them to the Backup Client Note You are advised to always enable this setting if you have a slow connection to the Internet as Use compression faster over the Internet the files are smaller with this option enabled Restore file and folder Disable this option if you do not want to restore the file and folder permissions typically used permissions after a complete server failure to restore files before users accounts are re created Enable this option t
28. ey we can provide the original However if you have chosen to change the encryption key the original will be of no use In this case please make a note of the changed encryption key and keep it in a secure location Should you forget your encryption key and lose access to your data we cannot re enable access to your data Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 1a IN 1a Step 3 of 6 Select the connection type that you want to use to connect to the Storage Platform Use the Configure Proxy button to specify any Proxy settings needed for communications to the Internet Click Next to continue If you select the modem dialup connection the next step will prompt you to supply the connection that you want to use Step 4 of 6 genios iR RM E stronigy nasconde bo enable eS e 1 1 adtomatic badiups F ux In this step you can configure the daily and hourly automatic EI backup schedule The default backup time is 19h00 It is esie um advised to backup at night when the server is not in use The icd nc server must be powered at the time of scheduled backups but Aibeanced Schedule 3 Mo Advanced Schedule you do not have to be logged in m Backup sk the follwing specified times Werk Day Additional Schedule Monday Wednesdayipi2Ho0 Tuesday l Lo 0 Friday
29. g Duration between connection retries seconds Socket timeout seconds Verify account limit before compression patching With this setting enabled the Backup Client verifies the backup account limit on the Storage Platform before starting with the 9 ewe tee compression and or patching processes It is useful to flag account limit issues before starting with these processes Enable Volume Shadow Copying to backup locked files enables you to backup locked files without using third party open file management software This is currently only available on Windows XP Windows 2003 Server and Windows Vista Operating Systems Note Disable the checkbox if you are using the Open File Manager plug in for a specific application or database Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 e Number of Backup Restore attempts before cancelling o By default the Backup Client tries to connect to the Storage Platform four times before cancelling the backup process If you have a poor connection to the Internet you may want to consider increasing the number of attempts The backup will continue from the previous point of failure It will not resend the entire backup e Connection Retries o By default the Backup Client will try to reconnect to the Storage Platform after 60 se
30. heir most valuable asset their data 1 1 System Requirements 1 1 1 Operating System e Red Hat v6 v9 e Fedora 1 1 2 Processor amp Memory e Required Pentium IIl processor with 256MB memory above operating requirements e Recommended Processor and memory requirements increase with the amount of data protected by Zen Vault Professional Amount of data protected Recommended Processor Recommended Memory Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 1 1 3 Disk Space e Required 50MB plus space for local cache e Recommended Amount of free space equal to the backup account limit Binary Patching is enabled The space requirement for Delta Blocking is considerably less Please refer to the Patching section in Chapter Three for more information File Server The local cache can be as large as the total size of all files selected for backup A file selection of 10 GB needs up to 10 GB free space for the cache Database Space is needed for the data dump which can be as large as the database as well space for the cache which is compressed version of the database Assuming 1 2 compression on a 10GB database you are recommended to have 15GB 10GB for the dump and 5GB for the cache free space available 1 1 4 Virtual Memory Settings e Double the amount of RAM with a minimu
31. his maintenance task is to ensure that the cache folder is up to date by deleting any files that fall outside the Days to keep files in Cache window 4 3 5 Performance and Limits Processor Usage and Disk Access The Backup Client uses a fair portion of the available processor power to patch compress and encrypt files while during the backup process If you use the computer at the same time you may experience some performance deterioration You can lessen this effect by lowering the Processor Usage Disk Access is another setting that you can modify to limit performance deterioration If this setting is set to high the Backup Client will continuously use all available disk access to write to the disk ensuring that the process completes as fast as possible The process will take longer if you lower this setting but your other applications will function without any interruptions Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 Limits e Outgoing transfer limit o The outgoing transfer bandwidth can be limited in Kilobytes second in case you need to allocate only a certain amount of bandwidth to the Backup Client e Backup size restriction o You can limit the total amount of data that may be transferred during each backup Note If you enable this option it may take several backups b
32. last 30 seconds You have to close the Backup Client or wait a few seconds before these files will be saved 4 1 5 Backup Resume The Backup Client can try to resume a backup if the previous request failed for whatever reason If you select Backup Now from the File menu or you click on the Backup button in the toolbar and the previous backup was not successful the Backup Client will prompt Do you want to resume the failed backup with a 30 second countdown If you select Yes the Backup Client will try to continue from where the process failed during the previous backup Select No to initiate a new backup or Cancel to return to the Backup Client Note A new backup will be initiated after the countdown has elapsed 4 1 6 Multiple Thread Backups Zen Vault Professional supports multiple thread backups Files will be transferred to the Storage Platform using a second thread as soon as they are compressed or patched while the backup process continues to compress patch files using the first thread in the background This improves the total backup speed significantly Note This functionality is enabled by default To disable this feature please refer to the Advanced Options section later in the user manual 4 2 Howto Restore The next section describes how to select the files that you want to restore how to search for specific backed up files and finally how to restore files from the Storage Platform 4 2 1 How to restore files
33. les you to specify File and Folder Exclusions These files and folders are excluded from the backup selection no matter where they are located on the available drives or volumes Note These entries are case sensitive you have to ensure that you specify exact matches Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 IN To add an exclusion click on Add folder or Add file specify the name and click OK Folders are displayed with L and files with To modify any of the exclusions select the entry and click on Edit or double click on the exclusion name To remove an entry select the file and click Remove Click on Ok at the bottom of the Exclusions tab to save your changes Excluded files are displayed with and folders with amp in the Backup Client 4 3 8 Advanced Options Options and Retries The Backup Client can be configured to Always connect to the Storage Platform during each backup to update its last backup date stamp even if there were no changes made to the backup set With this setting enabled the Storage Platform will always be up to date with the latest backup date SSL Encryption can be disabled to improve the transfer time during the backup and restore processes Note By disabling SSL encryption you are lowering the security level when transferring file
34. lient has the correct permissions to reconnect and write to that share Cache When modifications are made to a file the Backup Client only transmits the changes to that file as opposed to transmitting the complete file again This is accomplished by keeping a compressed copy of the file in a local cache and then using a sophisticated patching technique to extract the difference between the file in the cache and the one ready to be backed up Files are only kept in the cache for a certain amount of days Files are added to the Cache folder if the file was modified within the Days to keep files in Cache window Once a file has been flushed from the cache a full copy must be backed up when any modifications are made to the file The longer files are kept in the cache the better the chance of only transmitting patches instead of full copies and thus reducing the amount of data that needs to be transmitted If you have limited disk space you may want to consider shortening the time files are kept in the cache Note If you select 0 days patching is disabled any files in the Cache folder will be deleted and complete files are backed up to the server during each backup To delete the current cache use the Clear Cache button If you delete the cache full copies of your selected files will be re sent to the server during the next backup You may notice that the Backup Client will log the message Doing monthly cache cleanup once a month T
35. m of 512MB Total for all disk volumes 1 1 5 Minimum Video Settings e 800 x 600 Resolution 256 colours 1 1 6 Other Hardware e Network interface card or a virtual network adapter card e CD ROM drive or Internet access to download and install the software 1 1 7 Zen Vault Professional is also available for the following operating systems e Microsoft Windows 2000 Server Server 2003 e MAC OSX Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 2 Installation This section describes how to install the Zen Vault Professional Client on the Red Hat Linux platform Zen Vault Professional supports Red Hat Linux v6 v9 and Fedora Project Please note that you have to be logged in as root to configure the necessary settings The Backup Client requires working space for the cache and temporary disk space for creating patches Note Make sure that the drive where you install the Backup Client has enough free hard drive space for the cache and temporary files 2 1 Jave Runtime Environment JRE You have to install the JRE before you will be able to run the Backup Client Get the JRE from the Sun website java sun com for your system JRE 1 5 is the supported environment for Zen Vault Professional Please make sure that the Java executable is in your PATH environment variable 2
36. o write files directly to the specified folder without using a temporary working Restore directly to target folder The restore process is faster using this option but file level resume is not possible and a location complete file will be resent should there be a communications error between the Storage Platform and the Backup Client during the file transfer Restore log information can be viewed in the Logs tab Restore entries are displayed in green Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 4 2 2 Finding files The Find files in Backups option enables you to search through your previous backups to find a specific file You have the option to do a local search from your last backup or you can connect to the Storage Platform to search through your previous backups To search for a file from your latest backup select Find files in backups from the File menu or click on the Find button in the toolbar Enter the filename in the textbox and click on Find Example If you enter help in the textbox the Backup Client will display a list of all backed up files from your last backup that contain help in either the filename or the folder Note You can use the and wildcards for advanced search queries to find the files that you are looking for Eb Files in Backups BH X
37. og errors and warnings Enable the Include date in log file time stamp checkbox to add the date to the backup and restore log files Automatic Log File Deletion A log file retention period can be enabled to delete files older than e g 30 days by enabling the checkbox and specifying the duration in days 4 4 Additional Settings The Tools menu provides you with various options and settings that you can modify to enhance and streamline your Backup Client You can also modify your account settings from this menu 4 4 1 Add Network Volume You have the option to add network volumes and include files located in these locations to your backup selection Note You have to ensure that the backup service is started up as a user that has sufficient permissions to browse and access the network shares The Backup Client will only be able to backup files from a network volume after the share has been accessed and authenticated by the server where the Backup Client is installed To add a network volume select Add Network Volume from the Tools menu Enter the UNC network path in the space provided Paths must to start with V before they will be accepted for example fileserver documents You can also use the Browse button to browse to the network path Network volumes are listed in the left hand pane ri after they have been added and displayed with a i network image If some files are included the image will Zen internet Sandbrook Park San
38. rity over any settings specified in the Backup Client They include e Changing the backup schedule e Specifying system file exclusions e Adding additional filters to the filter list e Most Options and Settings found in the Tools menu When the Backup Client connects to the Storage Platform it will receive a list of any Dynamic Profiling settings specified by the Backup Administrator and these changes will be implemented in the Backup Client You can manually connect to the Storage Platform by clicking on the Retrieve Settings button in the Account and Security Options section to update Dynamic Profiling settings Profiled settings are greyed out and cannot be modified from within the Backup Client Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 4 4 6 Language If multiple languages are available the Backup Client will select and display the default OS language You have the option to change this setting From the View Menu go to Languages and select one of the available options 4 4 7 Look amp Feel You have the option to change the look and feel of the Backup Client From the View Menu go to Look amp Feel and select one of the available options Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fa
39. rst time select I want to create a new backup account If you have an existing account that you want to reconnect to select the want to reconnect to an existing backup account option Click Next to continue Note You cannot connect from different servers to the same backup account Each server must have a separate account f Account Setup Wizard Step 2 of 6 Enber the new account detaia Choose and enter your preferred account name password and encryption ke Ur Enter your backup username password and encryption key Account Details which can be found in your Welcome to Online Data Backup e Backup username File and Print 2 Eschup pasoweord eee Confirm password reeememenn mail Pease chopa an encryption key of amp characters or mare that wall be used bo encrypt your backups on the server IF you lose this key you wil not be able to restore your data so write it down and store it somewhere cafe Note Confirm hey For security reasons please change your password and encryption key prior to performing your first backup pred by ATTIX ie lt er J ues emen IMPORTANT INFORMATION Please note that we only keep a record of the original encryption key We do not store the original password In order to ensure maximum security we recommend that you change both the encryption key and the password prior to your first data backup In the event that you lose your encryption k
40. s to and from the Storage Platform This setting should only be used in a secure environment Complete compression patching before sending data to Options and Settings OA t and S it i 1 1 1 Eu a the Storage Platform Enable this option if you do not want Backup Schedule Options and Retries Disk Usage F i Performance and Limits Various options can be configured From this section to suit your requirements to m ake u se of m u Iti p e th re ad b acku ps to S peed u p th e System Filters _ Always connect to the Storage Platform during the backup process Global Exclusions Enable this option to always update the Backup Monitor with the e TUTTA Options pu date even if there were no changes to the backup backup process typical ly needed when using a dial up Mandatory Patching Logging Disable SSL Encryption during the backup and restore process account With this setting enabled the Backup Client will This option will ensure Faster transfer speeds but at a lower security level Only use this option when restoring within a secure environment compress all new files and patch all modified files before _ Complete compression patching before sending data to the Storage Platform v Verify account limit before compressionjpatching starting to transmit data to the Storage Platform v Enable Volume Shadow Copying to backup locked files Number of Backup Restore attempts before cancellin
41. ted at the beginning of the file When this happens it will result in a patch as large as the complete file It is advisable to closely monitor the sizes of the patches when Delta Blocking is enabled and rather disable it if it turns out to be ineffective 4 3 10 Mandatory Patching Mandatory files are scanned for changes regardless of whether it appears that they have changed since the last backup This is useful in situations where files are held open by an application internally the file changed but the change Is not reflected in the last modified date on the file system or in the size of the file itself Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 Open File Manager VSS enables the backup of these files without impacting the running application or corrupting the indicated file 4 3 11 Logging The Logs tab in the backup client provides detailed information about each backup and restore This section enables you to modify the structure of these log files You will notice an additional toolbar button when you open the Logs tab the Summary button can filter the information to only display the last 14 lines Log File Content You can specify the level of information that must be included in the log files Choose between e Log all messages e Suppress detail messages e Only l
42. the supplied a5 bp email plugin lt version gt tar gz file to this folder After you have extracted the file open the Backup Client interface 5 1 2 Configuration and Use To configure the Report plug in open the Tools menu select Plug ins and click on Reporting Enable the checkbox next to Use Email notification to enable the plug in Select whether you would like to receive notification for successful and or failed backups You can modify the e mail subject Note that the account name is automatically included in the subject e g Backup Completed User One Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 IN 1a S Notification settings EN X If Notify me after a successful backup w Use email notification is enabled you can choose whether Warnings and or w Notify me when a backup Fails Errors must be highlighted in the e mail subject by Messages Subject Backup Fated enabling the checkbox next to Append the subject line w Notify me after a successful backup with the following options and message An example Messages Subject Backup Completed v Append the subject line with the following options and message h Warnings v Errors encountered Please checkLog e g Backup Completed Warnings Errors encountered Please check Log
43. torepath original fd filterdate fp filterpath fext filterext compression onloff overwrite Note e rp restorepath must be an absolute path and the service must have full access rights to the director e When restoring the default policy is to skip existing files Specify overwrite to overwrite existing files Zen internet Sandbrook Park Sandbrook Way Rochdale OL11 1RY Registered in England No 03101568 Tel 01706 902000 Fax 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 Examples To start a backup on the local machine using the default port e abbackup cli u admin p pass backup To see the status of a currently running task e abbackup cli u admin p pass status To see a list of available backup dates to restore from e abbackup cli u admin p pass dates To start a restore from the last backup made extracting files to the default restore temporary directory e abbackup cli u admin p pass restore To restore from a different date use the dates command to get a date index e abbackup cli u admin p pass rd 2 restore To cancel the current running task on a remote backup service running on 192 168 20 99 e abbackup cli u admin p pass h 192 168 20 99 cancel 4 4 5 Dynamic Profiling Dynamic Profiling enables your Backup Administrator to propagate certain client side settings from the Storage Platform to your Backup Client Note These settings take prio
44. types from a specific folder and its subfolders For example a doc filter will include all existing Word documents as well as any new Word documents that may be added later To add a filter to a specific folder right click on the folder select filters and choose one of the available filters from the list A few filters have been provided for you to start with You can create modify and delete any of the filters To modify a filter select Filters from the Selection menu and click on Edit filters Select one of the filters and Add or Remove any of the file types The New filter option allows you to add additional filters Supply a name that describes the filter and then enter the file type s Example AutoCAD users may want to only select their drawing files as the rest are generated by AutoCAD and do not need to be backed up The filter could be called Drawings and the filter type would be dwg Files that are included by applying a filter are displayed with the green selection icons with a blue checkbox e g for files and L7 for folders Filtered files or folders cannot be deselected but you can exclude particular filtered files or folders by right clicking on the file or folder and then selecting Exclude A filtered folder with exclusions is displayed with a red 7 tint More than one filter can be applied to a specific folder To remove filters from a folder right click on the folder select Filters and clear the checkbox next to the
45. x 01706 902005 E mail info zen co uk Web www zen co uk Zen Internet 2015 5 Plug ins Adding to its features and functionality Zen Vault Professional also provides a solution for numerous data stores and applications These solutions are provided as plug ins to the Server Edition software The following Zen Vault Professional Plug ins are currently available free of charge e E mail Notification e System State Plug in The following Zen Vault Professional Plug ins are currently available as a cost option available to order from www zen co uk databackup or via Sales on 0845 058 9000 e MS Exchange 2000 2003 2007 e MS SQL 2000 2005 e Oracle 8i 9i 10g e Script Plug in e Single Mailbox Recovery for Exchange 2000 2003 5 1 E mail Notification The E mail Notification plug in enables you to receive e mail notification on backup activity You can configure the plug in to notify you on a specified e mail address when a backup has been successful when it failed or both 5 1 1 Installing the Report Plug in This plug in is included in the Server Edition installer as of v4 2 If it is not installed you have two options e RPM file o Copy the supplied a5backup plugin report lt version gt noarch rpm file to a local directory and execute the command rpm i a5backup plugin report lt version gt noarch rpm to install the plug in e AR GZ file o Create a plugins folder within the Backup Client install folder and extract
Download Pdf Manuals
Related Search