CX406 3-HP DUST COLLECTOR
Contents
1. Yes Upper Bag Size 19 x 32 Lower BagSie 19 x 32 Lower Bag Volume 11 10 Cubic Feet Static 18 5 Suction Capacity 2 300 CFM Noise 85 Intakes Triple Intake Each 4 Foot 35 x 50 Mobile Base for Easy Movement Yes Weight 0 0 0000 000000 75 Warranty CRRFTEX CX SERIES 406 3 DUST COLLECTOR PHYSICAL FEATURES 1 Micron Filtration Bags Collector Rings Clamps Metal Y Outlet Easy On Collection Bags UNPACKING The machine is properly pack aged and shipped c ompletely in cartons for safe transportation When unpacking carefully inspect the carton and ensure that nothing has been damaged during transit Figure 1 Inventory LIST OF CONTENTS QTY A Base 1 eeu 1 C Collector Ring 2 D Collector Ring Support 2 E Motor Impeller Unit 1 as 4 G 6516 M 3 Me 060186 1 Figure 2 Inventory LIST OF CONTENTS QTY I Regular Bot2. safety shoes when operating your machine DO wear loose clothing or jewelry when operating your machine A SAFE ENVIRONMENT IS important Keep the area free of dust dirt and ot her debris in the immediate vicinity of your machine BE ALERT DO NOT use prescription or other drugs that may affect your ability or judgment to safely use your machine DISCONNECT the power source when changing drill bits hollo w chisels router bits shaper heads blades knives or making other adjustments or repairs NEVER leave tool unattended while it is in operation NEVER reach over t he table when the tool is in operation ALWAYS keep blad es knives and bits sharpened and properly aligned ALL OPERATIONS MUST performed with the guards in place to ensure safety ALWAYS use push sticks and feather boards to safely feed your work through the machine and clamp the work piece when nec essary to prevent the work piece from any unexpected movement ALWAYS make sure that any tools used for adjustments are removed before operating the machine ALWAYS keep the bystanders safely away while the machine is in operation NEVER attempt to remove jammed cutoff pieces until the saw blade has come to a full stop CRRFTEX CX SERIEs 406 3 HP DUST COLLECTOR SPECIFIC SAFETY INSTRUCTIONS READ and follow all the instructions and safety precautions in the user manual before setup or use
3. THIS DUST COLLECTOR is designed for wood dust only It is not to be used for other materials such as liquids or metal scraps but not limited to nails and fillings It is also not intended to collect large pieces that will not pass through the impeller DO NOT place y our hands or tools near the open inlet while the dust collector is running Turn the machine OFF to repair service or inspection such as clogging DO NOT operate the dust collec tor in areas exposed to ignition s ources such as pilot lights open flame etc Suspended particulates may be a source of explosion ALWAYS wear personal protective devices such as masks respirators and safety glasses when emptying dust from the collection bags Proper disposal method should be followed MAKE SURE the c ollection bags and the top bags are sec urely fastened to the collector body before every use METALLIC OBJECTS that stri ke the impeller may produce a spark which can smolder in wood dus t for a lon g period of time before fire or flame is detected While operating the dust collector if metal cont acts metal immediat ely turn the switch to the OFF position and unplug the cord from the outlet allowing the impeller to come to a complete stop Empty the dust into an approved air tight metal container and remove all metal objects from dust prior to resuming operation CERTAIN WOODS maybe an irr itant or cause an allergic reaction It is good to know what
4. type of wood dust you will be exposed to in case there is an allergic reaction Always wear approved personal safety equipments ALWAYS turn OFF the dust collector and disconnect power allowing the impeller to come to a complete stop before servicing the dust collector or connected system MAKE SUREYy ou have read and understood all the s afety instructions in the manual and y ou are familiar with your dust collector before operating it If you fail to do so s erious injury could occur WARNING The safety instructions given above can not be complete because the environment in every shop is different Always consider safety first as it applies to your individual working conditions 01406 DUST COLLECTOR oe MODEL 406 3 HP DUST COLLECTOR As part of the growing line of Craftex CX Series woodworking equipment we are proud to offer the CX406 a 3 Hp Dust Collecto r with Canisters By following the instructions and procedure s laid out in this user manual yo u will receive years of excellen t service an d satisfaction The 406 is a professional tool and like all power tools proper care and safety procedures should be adhered to Motor mmi 3 HP Single Phase 220 Volt 12 Amps Switch Safety Power Switch with Removable Key Balanced Steel Impeller Yes Impeller 12 Easy On Lower
5. CX SERIES CX406 3 HP DUST COLLECTOR User Manual CRRFTEX eS CRRFTE eana TABLE OF CONTENTS General Safety Instructions pp 3 Speciile 4 CADO es EM I MD PI 5 F hysical FORTES 6 Sel Up 7 oO 7 0 54 200224 040 9 aai E 9 I8 UEM ETE 12 Optional Grounding IIb TOI CONI QD Cpu Duo Dd 12 92 4 SRL 13 13 Emptying the Collection Bag pp 13 5 trie ms 13 CASADO Paris Break 14 10 Ran 1 E 15 e eR 16 GENERAL SAFETY INSTRUCTIONS FOR MACHINES Extreme caution should be used when operating all power tools Know your power tool be familiar with its operation read through the user manual and practice safe usage procedures at all times ALWAYS read and understand the user manual before operating the machine CONNECT your machine ONLY t o the matched and specific power source ALWAYS wear safety glasses respirators hearing protection and
6. ESCRIPTION QTY me 4 fCaster D 2 Hex Screw 5 16 x 72 48 48856 Plate o 1 5 Pan Head Screw 10 24 x 3 8 12 Cover Hex Head Screw Hex Head Screw 9 Washer 10 Impeller 12 11 Collector Bod 12 Washer 6 Inlet 6 1 0 19mm 3 8 x 1 2 16 6Inlet LT ma 8 9Wasl 10 Imp 12 Was 13 Clan 17 Mot 18 Nut 19Y O 22 Coll Body her 13Clamp 4 5 16 x 3 4 4 4 Motor Switch wSafety Key 1 17 0 1 18Nutl 1 1 5 68 4 19Y Outlet 1 J 1 21 Collector S 1 ollector Bag 2 23Colector Support 1 2 24Righ Collector 0 1 25 Motor Packing 1 26 j UpprBagSupot 2 rFitr 2 20 Gasket 3 29Triple Gate 1 31 Power Cord 1 5mm S2 CRRFTEX XY X WARRANTY CRAFTEX 3 YEARS LIMITED WARRANTY Craftex warrants every product to be free from defects in materials and agrees to correct such defects where applicable This warranty covers three years for parts and 90 days for labour unless specified otherwise to the original purchaser from the date of purchase but does not apply to malfunctions arising directly or indirectly from misuse abuse improper installation or assembly negligence accidents repairs or alterations or lack of maintenance Proof of purchase is necessary All warrant
7. are not refundable e Busy Bee will repair or replace the item at our discretion and subject to our inspection e Repaired or replaced items will be returned to you pre paid by our choice of carriers Busy Bee reserves the right to refuse reimbursement or repairs or replacement if a third party without our prior authorization has carried out repairs to the item Repairs made by Busy Bee are warranted for 30 days on parts and labour e unforeseen repair charges will be reported to you for acceptance prior to making the repairs e The Busy Bee Parts amp Service Departments are fully equipped to do repairs on all products purchased from us with the exception of some products that require the return to their authorized repair depots A Busy Bee representative will provide you with the necessary information to have this done For faster service it 15 advisable to contact the nearest Busy Bee location for parts availability prior to bringing your product in for repairs 16
8. ector support with one end to the collector ring and the other end to the base Secure the bottom end to the base using screws and washers provided See figure 9 Bottom Figure 9 Installing the collector ring support Attach the second ollector to the base support in the same manner Now take the top bag support and align the holes on it with the hol es on the collector support and the collector ring Secure both using belt clamp provided See figure 10 Install the second top bag support rod and collector support to the collector ring in the same manner Attach the top bag to the collector rings and secure both using belt clamp provided See figure 10 Figure 10 Installing the top bag Install the second bag in the same manner and secure it with the belt clamp provided Your dust collector should come with a regular bottom bag as well as a set of Easy On bags To install the Easy On bag ins ert the belt clamp through the Easy On bag and attach the bag around the dust collector ring To install the regu lar bottom bag hook the bags to the hooks around the collector ring Then use the belt clamp to secure the collection bag around the collector 10 Slide the triple intake overth e impe ller Place the canister on the top of the collector intake hole and sec ure itus ing a screw ring and position the metal clamp around See figure 11 the canister bottom par t Ma ke sure th canister is sitt
9. ing ev enly on the collector ring and tighten the clamp Figure 11 Installing the triple intake INSTALLING CANISTER OPTIONAL Figure 13 Installing the canister The 406 does not come with canisters but you can buy it separ ately To install the canister to CX406 Attach the adhesive foam to the outside top rim of the collector rings as shown in figure 12 and trim and excessive foam Adhesive Foam Figure 12 Attaching the adhesive foam TEST RUN Once you have assembled your dust collector it is then time for a test run to make sure that the machine wor ks properly and is ready to use Remove all the tools used for assembling the machine components Walk around the machine ensure all nuts bolts and screws are tightened and the machine is properly assembled Connect the cord to the power source and turn the machine ON During the test run if there is any unusual noise com ing from the machine or the machine vibrates excessively turn OFF the power swit ch immediately and disconnect the cord from the power source Investigate if you can find outt he problem with your machine WARNING Before starting the machine make sure that you have read and understood the user manual and you are familiar with the safety features of the machine Failure to do so may cause serious personal injury WARNING Do not make any adjustments while the machine 15 running off the machine and un plug fr
10. lamps and connect t he ducting ground and the dust collector is ready for operation MAINTENANCE During the life of your machine you will need to practice some regular maintenance to keep your dust collector in peak performance condition WARNING Make sure the machine is turned off and the cord is disconnected from the power before servicing and removing replacing any components on the machine Check your machine daily for loose mounting bolts damaged cord worn switch full collecti on bag or any other unsafe condition All bearings are shielded and permanently lubricated and do not need any further lubrication EMPTYING THE COLLECTION BAG The collection bags should be emptied at a regular basis allowi achine to operate a higher level Always wear proper dust mask or respirator while emptying the collection bag The small dust particles flying into the air while emptying the collection bag can be easily inhaled and is extremely unhealthy causing serious long term respiratory problems CLEANING THE CANISTER IF USING A CANISTER The canister features a cleaning handle which is used to clean the canist er filter To clean the canister filter simply move the handle back and forth and the trapped dust particles will fall into the collection bag Figure 15 Canister filter cleaning handle CX406 DUST COLLECTOR PARTS BREAKDOWN 406 DUST COLLECTOR PARTS LIST PART D
11. om the power source before making any adjustments OPTIONAL GROUNDING KIT FOR CX406 Craftex offers an Optional grounding system with the CX406 to decrease the shock haz ard although extremely rare The sawdust being collected bec omes very dry as it travels thr ough the collection pipes or tubes and as it spins through the system it creates a staticc harge If this is not grounded it could giv e the tool operator a static shock Although the electrical shock is tremely minor it may have consequences to some individuals Figure 14 Optional grounding kit The grounding of the pi or tubes will help e liminate the possib ility of these shocks The copper wire included with the grounding kit should be connec ted to the steel chas sis of the dust collec tor and fed through a small hole m ade in the tubing or pipe The wire should then be fed to the tool being used and gr ounded to the steel chassis Should there be more than one tool connected through gates to the 406 they should all be gr ounded as described above 12 Operating the CX406 dus t collector is very simple and straightforward Make sure the dust collector is properly assembled and worked during the test run Move the CX406 close to the machine and use a proper size hose connecting the hose with its one end to the machine and the other end to the dust collector Make sure the connections ar secured using hose c
12. se extension cords with your CX406 Always try to position your machine lose to the power source so that yu don ot need to use extension cords In case if y ou really find it nec essary to use an extension cord make sure the extens ion cord does not exc eed 50 feet in length and the cord is 14 gauge to prevent motor damage ASSEMBLY Follow the instructions below to assemble Place the rubber gasket on the flange your CX406 opening of the motor impeller unit as shown in figure 6 Take the base unit and turn it upside down and attach the four cast ers to the base unit as shown in figure 4 Select the appropriate nuts and bolts provided and tighten securely Figure 6 Rubber gasket Take the Y outlet and carefully mount it on top of the flange opening as shown in figure 7 and secure it using nuts bolts and Figure 4 Installing the casters washers provided Turn the base upright and position the motor impeller unit on it by aligning the holes on t he motor impeller unit with the holes on the base unit Secure the motor impeller unit onto the base using nuts bolts and washers provided Figure 5 Motor Impeller unit mounted Figure 7 Y outlet installed Place the gasket on the collector ring opening and attach the collector ring to the Y outlet as shown in figure 8 Secure it using screws provided Figure 8 Installing the collector ring Install the second c ollector in the same manner Attach the coll
13. tom 2 J Easy On Bottom Bag 5 K Top Filtration Bag 2 Upper Bag Support Rod 2 Bag Clamps pp 4 Mounting Hardware Bag 1 NOTE While doing inventory if you can not find any part check if the part is already installed on the machine Some of the parts come assembled with the machine because of shipping purposes PROPER GROUNDING Grounding provides path of leas t resistance for electric current to reduce the risk of electric shock 406 is for use on a normal 220 volt circuit Make suret hat the machine is connected to an outlet having the same configuration as the plug If an adaptor plug is used it must be attached to the metal screw of the receptacle To prevent electrical hazards have a qualified electrician ensure that the line is properly wired The dust collector should be wired with a plug having 3 prongs to fit a 3 prong grounded receptacle as shown in figure 3 Do not remove the grounding prong to fit it into a 2 pronged outlet 220 Volt Grounded Outlet 3 Prong Grouding Plug Figure 3 220 Volts outlet for CX406 WARNING Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded is strongly recommended not to u
14. y claims are subject to inspection of such products or part thereof and Craftex reserves the right to inspect any returned item before a refund or replacement may be issued This warranty shall not apply to consumable products such as blades bits belts cutters chisels punches etceteras Craftex shall in no event be liable for injuries accidental or otherwise death to persons or damage to property or for incidental contingent special or consequential damages arising from the use of our products RETURNS REPAIRS AND REPLACEMENTS To return repair or replace a Craftex product you must visit the appropriate Busy Bee Tools showroom or call 1 800 461 BUSY Craftex is a brand of equipment that is exclusive to Busy Bee Tools For replacement parts directly from Busy Bee Tools for this machine please call 1 800 461 BUSY 2879 and have your credit card and part number handy All returned merchandise will be subject to a minimum charge of 15 for re stocking and handling with the following qualifications Returns must be pre authorized by us in writing We do not accept collect shipments Items returned for warranty purposes must be insured and shipped pre paid to the nearest warehouse Returns must be accompanied with a copy of your original invoice as proof of purchase Returns must be in an un used condition and shipped in their original packaging a letter explaining your reason for the return Incurred shipping and handling charges
Download Pdf Manuals
Related Search