Home

Manual for LED Spot Light Cob Tri Color 30W

image

Contents

1. press the SETUP key the display will show SPxx Using the UP or DOWN keys you can choose any numerical value from 00 to 99 to adjust the speed 99 is fastest Pr01 is the static color mode If Pr01 is selected you have ten colors to choose from When in Pr01 mode press the SETUP one time then press the UP or DOWN keys to scroll through the ten preset colors At this time a single color will be displayed steady on From this point to strobe these colors press the SETUP key the display will read F500 Using the UP and DOWN keys you can set the unit to strobe F500 Is full on F501 is slowest rate F599 is fastest Auto Run Mode Press MODE button multiple times until the display shows AUTO In this mode the unit automatically sequences through its seven available programs described above While in the Auto Running M ode you can adjust the speed in which the programs change as well as set a strobe rate if desired This is accomplished in exactly the same manner as described in the Built in Program M ode Static Color Mode Press the M ODE button multiple times until COLr appears Press the SETUP button multiple times you will scroll through the following options o Rxxx Red color adjustment o Gxxx Green color adjustment o bxxx Blue color adjustment o 5 00 Strobe rate adjustment The xxx as stated above represents the relative brightness of each color 000 is off 255 is the highest brightness You can individually adj
2. USER MANUAL Stellar aps Tri Color COB LED Spotlight Model 555 16205 www mcmelectronics com The Stellar Labs Tri Color Spotlight is designed to provide bright controllable spot with a well defined 5 beam angle Full control of the RED GREEN BLUE LED s allow virtually infinite control of color blending The LED design ensures efficient cool operation with COB technology providing outstanding brightness and color clarity A SPECIFICATIONS Voltage 100 240VAC 50HZ 60Hz Power consumption 30W LED COB Tri 30W Beam angle 5 Operation mode LED display IR Remote optional B OPERATION This unit features six modes M ultiple Built in programs Auto Run DM X control master slave Sound active Dimming mode Static color C PROGRAM MENU Press MODE to choose the desired operating mode Repeatedly pressing the M ODE button will scroll through the various modes DM X Channel Slave Sound Activated Static Color Preprogrammed and Automatic Once in a desired mode press SETUP to make changes using the UP or DOWN buttons Built in Program Mode Press the MODE button multiple times until Prxx is displayed default is Pr01 There are seven available programs each with a unique sequence of color changes and fades Without pressing the SETUP key press UP or DOWN keys to choose Pr01 through Pr07 If any program is selected other than PRO1 you can control the speed of those changes While the program is running
3. cs is not responsible for any consequential on inconsequential damage to any other unit Or component incorporated with this device There are no other warranties express or implied which extend beyond this unit and there are no warranties of fitness for any particular purpose The warranty does not cover consequential damage due to defective or improper use of products Distributed Exclusively by MCM Electronics 650 Congress Park Drive Centerville Ohio 45459 www mcmelectronics com
4. cted by 1CH 4CH the big value the higher strobe 11 255 frequency 0 Sound active sensitivity Master Slave M ode Repeatedly press the MODE button until SLAv appears this ensures the unit is in the slave mode In this mode all internal programming is disabled and the unit will follow standard DM X 512 protocol It may be controlled either by another identical light fixture or by a standard DM X controller Test M ode This mode allows the user to quickly verify that all three RED GREEN BLUE LED s are operating properly This is especially useful in large setups when many light fixtures are installed and need to be tested one at atime Repeatedly press the MODE button until tESt appears The light will begin blinking one of its three colors Press the SETUP button once then using the UP and DOWN keys you can scroll through the three colors Each color will strobe at a fixed rate Restore Factory Settings With the unit powered off simultaneously press the MODE and SETUP buttons While holding them power the unit on This will restore the original factory settings Warranty This Stellar Labs device is warranted by M CM Electronics against defects for a period of 365 days from the date of purchase This warranty includes manufacture defects and failure due to normal use and operation Failure due to misuse excessive wear or damage improper installation or other external factors is not covered under this warranty M CM Electroni
5. ust the colors of all three RED GREEN BLUE emitters to achieve a nearly infinite number of blends for virtually any color F5 00 allows you to set the light to strobe Strobe values range from F5 00 to F5 99 99 being fastest Sound Activated Mode Repeatedly press the MODE button until the display shows SUxx The display range is SU01 SU31 This is the sound activated mode the SUxx number represents the sensitivity with 31 being the most sensitive Press the UP or DOWN buttons to adjust the sensitivity DMX Mode for use with DM X controller e There are three DM X modes 3 channel 6 channel and 7 channel e Press the MODE button multiple times until 512 appears in on the display e Press the SETUP key twice and the channel mode will display either 3 6 7 channel Use the UP and DOWN keys to toggle between these three modes e Once the channel mode is set you can set the beginning DM X channel e Press the SETUP key twice the display will display d 001 Using the UP and DOWN keys you can set the beginning DM X channel DMX Channel Allocations 7CH Mode We the biger built in programs running speed the faster sound active sensitivity speed Ea 255 the biger strobe frequency value the higher frequency DMX Channel Allocations 3CH Mode FUNCTION R 0 100 0 G 0 100 0 255 B 0 100 DMX Channel Allocations 6CH Mode FUNCTIONS No use Pies 11 11 255 Sound active No use strobe color strobe sele

Download Pdf Manuals

image

Related Search

Related Contents

  Download(AKH150S)  tronçonneuse électrique Lidl Florabest  Télécharger PDF  

Copyright © All rights reserved.
Failed to retrieve file