to instructions of current product version
Contents
1. No employee of Vita Mix or any other person is authorized to make any warranty in addition to or amendment of the warranties made herein For warranty details for machines purchased outside the USA contact your authorized Vita Mix distributor or call the Vita Mix International Division at 1 440 782 2450 or email international vitamix com for a distributor near you In the event your Vita Mix blender needs service or repair covered by the terms of this warranty please call the Vita Mix Corporation for warranty assistance For machines purchased in the USA call Vita Mix Technical Support 800 886 5235 If purchased outside the continental USA contact your authorized Vita Mix Distributor or telephone the Vita Mix International Division at 1 440 782 2450 or email international vitamix com for a distributor near you Any item sent to Vita Mix pursuant to the terms hereof must be sent in original or sufficient packaging Customer is responsible for in bound freight costs for warranty service Do not return or send in products without the approval from Vita Mix All product returns must have the Return Authorization Number clearly marked on the outside of the box Any product that is sent to Vita Mix without prior authorization or approval will be returned to the shipper s address as is without repair 25 26 PARTS LIST The Quiet One 15092 Splash lid for 48 oz 1 4 L Advance container 15986 Lid only no plug for2. Ready cord is firmly in power outlet b Check to make sure the On Off power switch is in the on position c Turn the On Off power switch to off then on to reboot the electronics Machine starts then shuts off Check to make sure there is power to the machine Call Vitamix technical support e Display window reads SHUT DOWN Let the machine cool for an hour restart SEE MANUAL Call Vitamix technical support e Display window reads MOTOR Let the machine cool for an hour restart LOCKED PROGRAM TERMINATED Call Vitamix technical support if the machine does not work after sitting at room temperature for 24 hours Machine is running irregularly a Turn the machine off and on again to NO PROGRAM is displayed when a reset the programming button is pushed b Try plugging the machine into a new Button pressed starts wrong program outlet e Machine starts by itself Call Vitamix technical support A specific program button is defective Machine was turned off for a day week or month and turned on but there is no power Machine does not work when first tried Machine works but no information displayed on screen Program buttons run the blender on the same speed Problems e Display window reads CORRUPT DATA Possible Actions Turn the machine off and on again to reset the programming Call Vitamix technical support e Display window reads THERMAL SENSOR FAILURE Call V
3. Vita Mix will replace the motor base without charge If the motor base fails after thirty 30 days but within one year from the date of purchase due to a defect in materials or workmanship Vita Mix will assume the cost of all parts and labor necessary to repair the motor base e If the motor base fails after one year but within three 3 years from the date of purchase due to a defect in materials or workmanship Vita Mix will assume the cost of the parts deemed necessary to repair the base Container Lid Blade Assembly Drive Socket and Sound Enclosure if included The container lid blade assembly drive socket and where included a Vita Mix manufactured sound enclosure are warranted against defects in material and workmanship for one year from the date of purchase Conditions e The warranties contained herein run only to the original end user and are not transferable To make a warranty claim proof of purchase is required e This warranty is the sole remedy of the purchaser and sets forth the only obligations of Vita Mix and does not cover normal wear and tear abuse misuse negligent use alteration of the base or container or the sound enclosure or exposure to extreme conditions and is only valid if the Equipment is used in accordance with the accompanying instruction booklet which may also be accessed at wwwvitamix com foodservice If applicable improper installation or ventilation in the case of the in counter
4. 48 oz 1 4 L Advance container 15985 Two part lid assembly for 48 oz 1 4 L Advance container 15978 48 oz 1 4 L Advance container blade assembly amp Lid assembly 15980 48 oz 1 4 L Advance container only 15979 48 oz 1 4 L Advance container blade assembly no lid assembly 15990 Advance blade agitator assembly 15585 Retainer nut 891 Drive socket 15579 Sound reducing centering pad 015080 Compact back cover and cover door with removable hinge design 015081 Compact cover door 015082 Compact back cover 015107 Isolation Gasket 015083 In Counter gasket IMPORTANT NOTES e Outside the United States and Canada your machine may come with a different container configuration Contact your local Vitamix Distributor for item numbers e Other than the drive socket blade assembly and retainer nut this unit is not user serviceable Items Sold Separately 15985 ee 15606 15978 Software Kit USB Version 15980 15644 15979 Extra Programming Chip for Software Kit 15990 15585 15989 E One Piece Lid o Bp sss 15596 Retainer Nut Wrench 015107 015081 015080 015083 27 SPECIFICATIONS The Quiet One Electrical Requirements 120 V 50 60 Hz 15 amps Uses a U S A three prong grounded cord 20 amp outlet per machine is recommended Do not use extension cords with machine
5. BUTTON SET UP 2 Press the Speed button until the screen displays Recipe 17 RECIPE 17 gt 3 Press the 1 button to apply Recipe 17 4 Either continue programming the other five buttons or press the High Pulse button to exit and continue blending Programming your Machine with a Custom Chip 1 Turn on the machine 2 Remove the container and rotate the machine to the rear so that you can see the programming port 3 With the rear of the machine facing towards you insert the custom programmed chip with the words THIS SIDE FACING TO THE FRONT OF THE MACHINE toward the left into the port located on the right hand side of the machine opposite the On Off switch Push gently until chip engages into the port The display window will read New Module 4 Within 10 seconds the six Pre Set buttons will be re programmed and the display window will read _ Saved then Ready 5 Remove the programming chip return it to the original package and store in a safe easily accessible spot 6 Press one of the six Pre Set buttons to reveal in the display window the name of the program drink E Q Custom Programmed Chip Resetting the Pre Set Buttons to the original factory settings 1 Access the OWNER CONTROLS by activating the power switch located on the back of the motor base while depressing button 2 2 Once the unit powers up it will cycle
6. Sound Dampening Gasket Do not wash in the dishwasher High temperatures and chemicals may cause the pad to swell Do not soak The gasket may absorb water and swell It can take 24 48 hours of air drying before it returns to its original size Blade Assembly Do not soak the blade agitator assembly Be sure to wring excess water out of cloth or sponge when cleaning around the controls or any electrical part To prolong polycarbonate container life Vitamix recommends using soaps with a low PH balance such as a liquid dishwashing detergent Ivory Liquid Due to the nature of polycarbonates automatic dishwashing is not recommended Recommended sanitizing solution 1 5 tsp 7 4 mL institutional or household bleach in 2 qt 1 89 L water 21 TROUBLESHOOTING Problems Possible Actions e Loud noise from blender container a Broken or worn drive socket Replace blade area Item 891 Instructions are included Container blades do not spin with part e Increased vibration b Check blade assembly for loose damaged e Leaking from bottom of container or nicked components and replace c Tighten retainer nut with the retainer nut wrench moving clockwise until it is snug See page 17 Loud grinding noise from the blender Damaged motor bearings your machine motor may need to be repaired Call Vitamix technical support Machine will not run a Double check to make sure power Display window does not say
7. and length for blending 6 Once one of the six Pre Set program buttons is pushed the machine will start and stop automatically By pressing another Pre Set button the machine will stop the blending cycle 7 When the cycle is complete the blender stops Wait until blades come to a complete stop before removing the lid and or container from the motor base 8 Remove the container pour garnish and serve the drink 9 Press the On Off power switch to off when not in use Maintenance Tips Never bang the container against a surface to loosen the ingredients Remove the container from the base and use a rubber spatula to remove thick mixtures from the bottom of your container e Never shake or rattle a container while in use Never remove the container before the machine has come to a complete stop Never start the motor before the container is in place A warnines Turn power OFF or unplug the machine before touching movable parts Shut OFF power switch at night or whenever machine will be left unattended e If you detect a change in the sound of the machine or if a hard or foreign object comes into contact with the blades do not serve the drink Inspect your blade assembly for loose nicked or missing parts If parts are loose missing or nicked replace with new blade assembly See page 17 IMPORTANT NOTES a Check your blades daily for loose nicked or missing parts If you find something is loose n
8. model of the Equipment or placing the Equipment in a sound enclosure not manufactured by Vita Mix will void this warranty e This warranty is void in the event that repairs to the Equipment are performed by someone other than Vita Mix or an authorized Vita Mix Service Center Vita Mix will not be responsible for the cost of any unauthorized repairs e The sole obligation of Vita Mix under this warranty is to repair or replace the warranted part or parts as determined exclusively by Vita Mix In no event whether based on contract indemnity warranty tort including negligence strict liability or otherwise shall Vita Mix be liable for any special indirect incidental or consequential damages whatsoever including without limitation loss of profit or revenue The above limited warranty is your exclusive remedy and you and Vita Mix hereby expressly disclaim all other warranties or conditions express or implied statutory or otherwise including any implied warranty of merchantability and any implied warranty of fitness for a particular purpose and without limiting the generality of the foregoing you and Vita Mix hereby expressly exclude to the extent permitted by law the application of any sale of goods legislation and the United Nations Convention on Contracts for the International Sale of Goods as may be applicable Some jurisdictions do not allow a limitation on implied warranties or on special incidental or consequential damages
9. the motor speed down to a range of 50 7 The Pulse button will override the running program as long as it is depressed Once released the original program continues its cycle e The Pulse High IL and Low m speed is set by using the Speed buttons To set while pressing and holding a Pulse button press the Speed or button until the desired motor speed is reached The pulse speed will remain at this setting until changed again with the Speed buttons 10 CUSTOM PROGRAMMING The Quiet One is pre programmed with an Advance program which is optimized for the Advance container The program can be customized by using the control panel or a programming chip or programmer software kit available from Vitamix Call your distributor or customer service for more information Programming Pre Set Buttons 1 Access the 34 stored programs by activating the power switch located on the back of the motor base while depressing the High Pulse button The display will say BUTTON SET UP 2 Press the Speed or buttons to scroll thru the Recipe numbers until you reach the one you want For a description of each recipe see page 6 3 Press the Pre Set button that you want to program for the recipe selected BUTTON SET UP For Example If you wanted to program RECIPE 1 button 1 with recipe 17 BUTTON SET UP 1 After accessing the stored programs as described in step 1 the display window will say BUTTON SETUP
10. through three screens then stop on the motor status screen Depress button 2 again within 12 seconds to scroll through the menu settings 3 Scroll using button 2 The screen will display 1 TO OVERWRITE CURRENT PROGRAM Depress button 1 to reset to the original factory settings IMPORTANT NOTES Programming Chip If the above programming steps are taken and the custom programming does not appear with the first blend cycle turn the chip 180 side to side and try again 11 12 CUSTOM PROGRAMMING Recipe Options Arranged by recipe number and drink type RUN DRINK TYPE DESCRIPTION TIME General Purpose 1 j Ramps up to 60 for 18 seconds 18 Smoothie 2 Double Smoothie Ramps up to MED 45 for 6 seconds then 58 for 18 8 seconds then HIGH 85 for 4 seconds 3 Frozen Coffee amp Juices Ramps up to LOW 25 for 4 seconds then to MED 60 18 for 14 seconds 4 Ice Cream Drinks Ramps up to MED 55 for 5 seconds then LOW 25 28 for 7 seconds then 12 for 16 seconds 5 Double amp Hard to Blend Ramps up to MED 51 for 10 seconds then ramps 20 Ice Cream Drinks up to HIGH 85 for 10 seconds 6 Thick Hard To Blend Ramps up to LOW 15 for 7 seconds then gradually 28 ramps up to HIGH 82 for 21 seconds 7 Medium Smoothie Gradually ramps up to HIGH 100 20 8 Hard to Blend Smoothie Gradually ramps up to HIGH 100 25 9 Thick Smoothie Ramps up to MED 50 for 15
11. to LOW 15 26 2 Shake Ramps up to MED 50 decreases to LOW 25 then 30 gradually decreases to LOW 17 Ramps to HIGH 100 decreases to LOW 25 then 3 Shak 20 27 GE decreases to LOW 15 28 Ice Cream Drink Ramps up to MED LOW 35 then ramps to MED HIGH 75 15 29 Small Shake Ramps up to MED 58 then decreases to LOW 25 10 30 Hard to Blend Shake Ramps up to MED HIGH 80 decreases to MED 51 then 25 gradually increases to HIGH 100 31 General Program 1 Ramps up to HIGH 100 125 32 General Program 2 Slowly ramps up to HIGH 100 245 Quickly ramps up to MED 40 decreases to LOW 15 G P 3 24 35 General Program then up to HIGH 90 34 General Program 4 Quickly ramps up to MED 45 then gradually increases 35 to MED HIGH 75 13 14 MACHINE ASSEMBLY Compact Cover Cover Door 1 The cover door can be removed by opening it until the door is horizontal Then gently spread the sides of the door over the round hinges and remove 2 To reinstall the cover door gently spread the sides of the door and place the door hinge cutouts over the round hinges FIGURE A IMPORTANT NOTES s Containers The Quiet One machines are optimized for use with the Vitamix 48 oz 1 4 L Advance container 3 sided container The 64 oz 2 0 L standard container will not fit in the compact cover used on the The Quiet One Contact Vitamix customer service at 800 8
12. with a curtain or extended skirt a 4 0 in 10 2 cm diameter flexible duct dryer hose must be used to vent exhaust Attach the duct to the bottom exhaust by forcing the end of the hose over the exhaust baffle of the unit Run the duct out of the cabinet for proper ventilation Multiple units should not vent to a common manifold unit but to separate places with separate vent ducts e When cutting holes for placement of multiple In Counter units position the edge of the machines at least 12 0 in 30 5 cm apart to ensure quick cleaning and proper venting between machines e It is recommended that for a 120 V unit In Counter installation you have at least one 20 amp outlet per machine under the counter available within 6 ft 1 8 m of the machine 220 V and 100 V units require a dedicated line Consult an electrician for proper electrical needs e The In Counter unit also requires a gasket provided in the machine s original package to be placed between the machine and the counter e Refer to The Quiet One In Counter template provided in the machine s original package for detailed installation guidelines and a template Do not vent hose into a wall ceiling or a concealed space of a building or cabinet Do not use hose clamps or equivalent to attach exhaust hose on machine When removing blender from the counter always remove the container cover door and back cover from the machine first Do not strike the blender when removin
13. 86 5235 or contact your distributor for more information e Outside the United States and Canada your machine may come with a different container configuration k o Back Cover For enhanced sound reduction the sound enclosure for the The Quiet One is secured to the base using a patented magnetic system Aside from the advantages of reducing blending noise over that of mechanically attached door systems the magnetically attached system allows for fast and easy removal for cleaning 1 To remove the sound enclosure a First ensure that the container has been removed from the unit b Grasp the enclosure with both hands c Tilt slightly back and pull the enclosure straight up See Figure B 2 To replace the sound enclosure a Start with the back cover detached from the cover door b Align the opening in the base plate of the back cover See Figure C c Start on one side of the centering pad and slowly lay the back cover into position ensuring that the sound dampening pad is not pinched by any portion of the base plate Figure D E FIGURE C na 15 MACHINE ASSEMBLY Two Piece Lid 48 oz 1 4 L Advance The two piece lid is easy to clean and easy to put on take off and seal e To remove a fully latched lid lift the two tabs an pull upward and off e Twist the center lid plug to fasten or remove One Piece Lid 48 oz 1 4 L Advance Container The one piece lid is easy t
14. Dampening Gasket and Container Centering Pad The sound dampening gasket located between the base and the cover door can be removed for cleaning by simply pealing it off the base after the cover has been removed See pages 14 and 15 for cover removal Wash the gasket and pad in warm soapy water Rinse clean under running water and dry Reassemble before use To reinstall the sound dampening gasket simply lay it on the base making sure that it fits snuggly against the centering pad Replace the sound enclosure as directed on page 15 Make sure the gasket is seated properly against the blender and the centering pad The gasket and the centering pad should be flat on the motor base Container The Advance container has been designed to be chemical resistant However for maximum container life hand washing is recommended 1 To Clean Wash all container parts in warm soapy water Rinse and drain Do not soak the blade agitator assembly 2 To Sanitize After all solid residue is removed fill container 3 4 full with a sanitizing solution mix Return container to motor base and firmly position the two piece lid Run machine on a high speed for 30 seconds Turn machine off and allow mixture to stand in the container for an additional 1 5 minutes Pour out bleach mixture 3 Return container to motor base and run machine empty for an additional 5 seconds Do not rinse after sanitizing Allow container to air dry IMPORTANT NOTES
15. The Quiet One Blending Station ALL MODELS Use and Care Manual Read and save these instructions ON COUNTER IN COUNTER Vitamix CONTENTS Important Safeguards cece ectteeteeeceenn 4 General Instructions rnrn 6 Pre Set Program Buttons Blending Tips Maintenance Tips Control Panel nnn 8 Custom Programming n 10 Programming Pre Set Buttons Programming Custom Chip Resetting Pre Set Buttons Recipe Options Machine Assembly nnn 14 Compact Cover Lid Blade Assembly Installation 0 18 Caring for your Machine ccc 20 Troubleshooting cece cece eee pesenntvtnntnnneecene 22 Warranty iiinn 24 Parts Lisi a ee 26 IMPORTANT SAFEGUARDS Read all instructions To protect against risk of electrical shock do not put motor base in water or other liquid Close adult supervision is necessary when machine is used by or near children 4 Unplug the power cord from the wall outlet when the Vitamix machine is not in use before disassembling when putting on or taking off parts and before cleaning other than washing the container Never come in contact with moving parts especially the blades 6 Do not operate any machine that malfunctions has a damaged cord or plug has been dropped or i
16. ation messages A Ready message appears when there is power to the machine Owner Controls The owner control panel is accessible by activating the Power Switch located on the back of the motor base while depressing button 2 e Once the unit powers up the display will cycle through VERSION 201 three screens The first indicates the current program version The second indicates which program is running on eee on TOTAL the machine The third will indicate the motor temperature NORM WARM HOT and the total hours of operation TIMER HR MIN SS including production and testing This time can not be cleared 0 10 33 Once this screen is reached button 2 can be released Depress button 2 within 12 seconds to scroll through VITA MIX ADVANCE PROGRAM 201 the menu settings e The first press will reveal the timer Total operation is recorded in hours minutes and seconds including CURREN PROGRAM production and testing This time cannot be cleared The second press will reveal the name of the program controlling the Pre Set buttons If you are using the Advance settings this will read VITA MIX ADVANCE PROGRAM e The third press will reveal an option to reset the Pre Set buttons to the original factory settings Pulse Buttons The pulse provides a quick increase or decrease in speed of the blade when blending or refreshing a drink Press IL to increase the motor to speeds that range from 51 100 Press mL to decrease
17. container properly attached The maximum capacity is equivalent to the ounces liters listed on the container i e 48 oz 1 4 L and is substantially less with thick mixtures Always operate the Vitamix machine with the lid in place and securely attached Display window area will scratch when contacted with a scouring pad or sharp object Use a soft cloth to wipe the control panel area clean The Blending Station cannot be cleaned with a water jet It is recommended that for a 120 V installation you have at least one 20 amp outlet per machine available within 6 ft 1 8 m of the Vitamix 220 V and 100 V units require a dedicated line Consult an electrician for proper electrical needs 18 CAUTION Turn power off or unplug the machine before touching movable parts Shut OFF power switch at night or whenever machine will be left unattended Save These Safety Instructions e The Vitamix blender s U S A power cord comes equipped with a three prong grounding plug which mates with a standard three prong wall outlet Figure A This cord will vary for countries outside the United States of America e Adapters Figure B are available for two prong outlets Do not cut or remove the third ground prong from the plug or power cord e Consult your electrician if you are not sure if the wall outlet is grounded through the building wiring With a properly grounded two prong wall outlet ground the machine by attaching the
18. e 220 240 V 50 60 Hz 1300 1550 Watts 100 V Japan 50 60 Hz 1000 Watts On Counter Dimensions 18 0 in 45 7 cm high with lid closed 24 5 in 62 2 cm high with lid open e Depth 10 7 in 27 2 cm with handle e Width 8 5 in 21 6 cm In Counter Dimensions e 16 5 in 41 9 cm high with lid closed e 23 0 in 58 4 cm high with lid open e Depth 10 7 in 27 2 cm with handle e Width 8 5 in 21 6 cm Depth below counter 1 2 in 3 0 cm When applicable M CE O les Bs 2 To see the complete line of Vitamix products visit vitamix com foodservice Vitamix Vita Mix Corporation Commercial Division 8615 Usher Road Cleveland Ohio 44138 U S A Tel 440 235 0214 Email commercial vitamix com 2010 Vita Mix Corporation No part of this publication may be reproduced or transmitted in any form or by any means or stored in a database or retrieval system without the written permission of the Vita Mix Corporation Printed in the U S A 101854 01 10
19. g from the counter Do not use the In Counter gasket on a wooden counter Discoloration of the counter will occur IMPORTANT NOTES Do not use the In Counter on wooden counter tops The gasket located between the machine and the counter will leave permanent black marks on wood The area below the counter must have adequate ventilation to provide air circulation around each motor This will prolong the life of your machine If storing powders mixes sugars etc around the machine make sure containers are tightly sealed The intake and exhaust air caused by running the machine will disperse any loose products On Counter and In Counter Blending Station Electrical Requirements 120 V 50 60 Hz 15 amps Uses a U S A three prong grounded cord 20 amp outlet per machine is recommended Do not use extension cords with machine e 220 240 V 50 60 Hz 1300 1550 Watts e 100 V Japan 50 60 Hz 1000 Watts On Counter Dimensions e 18 0 in 45 7 cm high with lid closed e 24 5 in 62 2 cm high with lid open e Depth 10 7 in 27 2 cm with handle e Width 8 5 in 21 6 cm In Counter Dimensions e 16 5 in 41 9 cm high with lid closed e 23 0 in 58 4 cm high with lid open e Depth 10 7 in 27 2 cm with handle e Width 8 5 in 21 6 cm Depth below counter 1 2 in 3 0 cm Recommended distance between machines and under hang or wall 12 0 in 30 5 cm from the edge of each machine or as far apart as po
20. icked or missing replace the blade assembly before use see page 17 Do not tighten hex headed screw on top of blade assembly If loose replace blade assembly immediately e The instructions appearing in this Use and Care Manual cannot cover every possible condition and situation that may occur Common sense and caution must be practiced when operating and maintaining any appliance e On all units the built in thermal protector keeps track of how hot the motor gets and will warn the user and eventually shut down the motor if the motor is overheating When overheated the display will instruct the user to remove the container and run the machine until cool This takes about two minutes See page 23 Cooling the Motor for complete instructions When the thermal protector shuts the motor off review your processing techniques and your instructions Your recipes may be too thick or have too much material in them Consider adding more liquid and consult Vitamix Customer Service or your local Vitamix Distributor for further assistance a J Speed Pulse A START STOP v Speed Control Pre Set Programs High Low Pulse On Off Power Switch Located on the back of the motor base the On Off switch controls the power to the machine While plugged in switch to ON to ready the machine for blending Shut off the power switch at night or whenever the machine will be left unattended Start Stop Button Pressi
21. itamix technical support Machine stops in the middle of its blend cycle and resets display window reads VITA MIX GENERAL PROGRAM then READY a Plug the machine into its own power supply b Make sure the machine is not running ona long extension cord If the machine has overheated The motor will stop and the message MOTOR HAS OVERHEATED REMOVE THE CONTAINER THEN PRESS START will scroll across the display window while the words HOT SHUTDOWN will remain in the display window alerting you of the problem Remove the container shut the cover door and press the Start Stop button and run the machine for two minutes When the motor is cool READY will appear in the display window If you cannot fix your machine with these suggestions technical help is available by calling Vitamix technical support at 800 886 5235 If you purchased your equipment outside the U S A contact your local Vitamix Distributor or telephone the Vitamix International Division at 1 440 782 2450 or email international vitamix com for a distributor in your country For online help visit www vitamix com foodservice 23 24 WARRANTY LIMITED WARRANTY In order to maximize the life and keep your Vitamix product in good working order it is important that you follow a few simple maintenance tips Periodically inspect the drive socket for visible wear and tear cracks or brakes to the socket If da
22. mage is found replace the drive socket with the extra drive socket enclosed with your blender To purchase additional replacement drive sockets contact Vitamix at 1 800 437 4654 1 800 4drink4 for a dealer near you For customers outside the USA contact your authorized Vitamix Distributor or call the Vitamix International Division at 1 440 782 2450 or email international vitamix com for a distributor near you 2 Manually rotate the blade bearing assembly to make sure it turns without hesitation or doesn t spin too freely If the blade hesitates or spins too freely contact Vitamix at 1 800 437 4654 1 800 4drink4 for warranty information or a dealer near you For customers outside the USA contact your authorized Vitamix Distributor or call the Vitamix International Division at 1 440 782 2450 or email international vitamix com for a distributor near you WN Never run the machine without the centering pad properly placed on the base Vita Mix Corporation hereinafter Vita Mix warrants to the original end user proof of purchase required purchased in the USA that this commercial Vita Mix blender hereinafter the Equipment is free from defects in material and workmanship for the warranty periods applicable to the Equipment as described herein and subject to the conditions set forth below Motor Base Vita Mix warrants to the original end user that If the motor base fails within thirty 30 days from the date of purchase
23. ng Start Stop once starts and runs the machine and turns the blade Press Start Stop button again to stop the machine and the blade Speed Buttons Press the button to gradually increase the speed of the blade in increments of 1 up to 100 Press the button to gradually decrease the speed of the blade in increments of 1 down to 7 Speed is used to set the blending speed of the Pulse buttons see Instructions page 9 and the Start Stop button Pre Set Program Buttons These buttons numbered 1 thru 6 are pre programmed blending cycles designed for the most commonly made drinks Depending on the viscosity of the drink you are creating pressing one of the six Pre Set program buttons will run the machine for a full cycle The machine will stop by itself when the cycle is complete A cycle varies in speed and length see the Instructions on page 6 for a complete description of the range of each Pre Set button Each button can be reprogrammed to any recipe through custom programming or by reprogramming to any of the 34 available recipes See page 10 for instructions on creating custom programming Due to difference of recipes your results may vary IMPORTANT NOTES Start Stop Button Pressing one of the Pre Set program buttons while the motor is running will stop the machine Speed Button These settings will reset if the power is shut off Display Window This area depending on which button is pressed displays a variety of oper
24. o clean and easy to put on take off and seal e There is no lid plug for this lid e Ingredients can be added through port on top Lift lid tabs to 7 remove lid at To secure lid plug rotate it so one tab locks between the notches on top of rubber lid Blade Assembly A warnines Never use a blade assembly with loose damaged or nicked components Caution Do not remove blades or blade assembly unless absolutely necessary Never attempt to take the blade assembly itself apart This will void the warranty 16 Blade Agitator Assembly The blade assembly includes a precision hardened stainless steel blade with enclosed double sealed steel ball bearings for maximum durability The rugged blade assembly literally explodes molecules of food and ice in the container helping every batch to homogenize more effectively The blades do not need to be removed for normal cleaning Refer to the information below to remove or replace Drive Spline Inserts into drive socket on the motor base to turn the blade Note Removing and replacing your container while the coupling is still rotating will strip the drive spline teeth This part is NOT removable Retainer Nut Must be snug Order the available Retainer Nut Wrench for best results Refer to the information below to remove or replace Blade Assembly Removal At times it may be necessary to give yo
25. s damaged in any manner If you purchased your equipment in the U S A call Vitamix Technical Support 800 886 5235 for examination repair possible replacement or electrical or mechanical adjustment If you purchased outside of the U S A please contact your local authorized Vitamix Distributor or contact the Vitamix International Division at 1 440 782 2450 or email international vitamix com for a distributor near you Do not use attachments not recommended or sold by Vitamix Doing so will void the warranty Alteration or modification of this product in any form is not recommended as such may result in bodily injury Do not use outdoors Do not let the power cord touch hot surfaces or hang over edge of table or counter Do not place the machine on or near a hot gas or electrical burner in a heated oven or allow machine to touch hot surfaces External heat sources can damage the machine Keep hands and utensils out of container while motor is running to prevent the possibility of severe personal injury and or damage to the Vitamix machine A rubber spatula may be used but only when the Vitamix machine is not running WARNING Blades are sharp Handle carefully e Never try to remove the blades while container is sitting on the motor base e Do not operate with loose nicked or damaged blades replace immediately e To reduce the risk of personal injury never place blade assembly on motor base without the Vitamix
26. seconds then ramps 35 up to HIGH 100 for 20 seconds 10 Mix Light Juice Runs on LOW 10 104 Nl Heavy Smoothie Runs at MED HIGH 75 ramps up back down then up 40 to HIGH 100 12 Hard to Blend Smoothie Runs on LOW 7 for 25 seconds quickly ramps up to HIGH 100 40 then decreases to LOW 7 and quickly back to HIGH 100 13 Regular Iced Coffee Quickly ramps up to HIGH 100 109 14 Double Iced Coffee Quickly ramps up to HIGH 100 113 15 Thick Coffee Ramps up to MED 55 gradually decreases to LOW 7 30 then quickly up to HIGH 100 0 0 16 Multiple Coffees Ramps up to LOW 25 gradually ramps up to MED 50 then 25 up to HIGH 100 Ramps up to LOW 25 gradually ramps up to MED 50 17 Multiple Coffees 2 then up to HIGH 100 130 18 Small Coffee Gradually ramps up to MED HIGH 75 14 19 1 2 Drink Cocktail Ramps up to HIGH 90 13 20 3 4 Drink Cocktail Ramps up to MED 45 then ramps up to HIGH 100 25 i Starts at MED 55 then decreases to LOW 7 Kids C 30 21 ene then to HIGH 100 22 Bar Shake Gradually steps up to HIGH 100 25 lt Ramps up to MED 58 decreases to LOW 22 then Bar S l 35 23 arSpecia gradually steps up to HIGH 100 24 Utility Blend Ramps up to MED 40 then gradually increases to 25 MED HIGH 75 Ramps up to MED 50 decreases to LOW 25 then 1 Shak 20 25 be gradually decreases
27. ssible UNDER HANGING OR WALL A 12 0 in 30 5cm 12 0in 30 5cm 12 0 in 30 5 cm In Counter Hole Additional Unit Cut Additional Unit Cif applicable l 4 4 in 11 1 cm 1 if applicable i by i 1 5 9in 149cm 20 CARING FOR YOUR MACHINE Cleaning Products Solid Supra Solid Power Guardian Acclaim Solid Guardian Plus Solid Super Impact Solid Insure Diverpak Eclipse H2 Liqui Safe L7 Acclean Poly Brite Glow MB 1 Lustre NC 25 Lustre Plus PSRA 41 D PSRA 41 E Liqui Ware 1 Liqui Ware MC D Flex Sur Met Rinse Aids Solid Rinse Dry Solid Brilliance Jet Dry Rinse Dry Destainer NuWare IMPORTANT NOTES Cleaning Products Do not use abrasive cleaning agents or concentrated bleach when cleaning Do not use any cleaners containing quanitary sanitizers on polycarbonate components i e Advance containers covers Do not use any of the following cleaning products automatic dishwashing detergents oven cleaners steel wool or other abrasive pads Cover Do not wash cover door handle or back cover in dishwasher It is recommended that the handle not be disassembled during cleaning However if you choose to disassemble the handle from the cover make sure to not over tighten it when reattaching it to the cover Doing so will cause damage Suppliers in U S A Ecolab Inc St Paul MN 800 352 5326 www ecolab com Diverse
28. tab on the adapter to the wall outlet cover by means of the screw in the center of the cover Figure B AQ WARNINGS Three prong adapters are not to be used in Canada cjg l h i D Bgg E Q Figure A Figure B IMPORTANT NOTES The instructions appearing in this Use and Care Manual cannot cover every possible condition and situation that may occur Common sense and caution must be practiced when operating and maintaining any appliance GENERAL INSTRUCTIONS Instructions for using the Pre Set Program Buttons The following is the basic settings of the six Pre Set buttons for The Quiet One These programs numbered 1 through 6 are blending cycles designed for the most commonly made drinks Depending on the viscosity of the drink you are creating selecting one of the Pre Set programs will run the machine for a full cycle The machine will stop by itself when the cycle is complete A cycle varies in soeed and length Your machine s Pre Set options may differ due to program revisions or due to the difference of recipes your results may also vary Button 1 General Purpose Smoothie blends smoothies and thin drinks consisting of juice and ice to a creamy consistency 18 Button 2 Double Smoothie blends similar drinks to that of button 1 but at larger volumes 18 Button 3 Frozen Coffee and Juices blends light coffee drinks to a creamy consistency 18 B
29. ur blades additional cleaning An easy to use blade assembly removal wrench Item 15596 may be purchased Turn the container upside down and grip firmly Insert retainer nut wrench in groove of retainer nut and rotate counterclockwise to loosen Then grip blades with a cloth and remove retainer nut by hand Replacing Blade Assembly With the container upside down grip blades with cloth insert into the container bottom and align with flat sides of container opening Place retainer nut on and hand tighten Using the retainer nut wrench carefully turn clockwise until secure using wrench Do not force If it is not tight enough you will notice increased container noise Retainer Nut Wrench in use 17 18 Awarnines INSTALLATION In Counter Machine Preparing the counter Area e Before cutting holes make sure that there is adequate clearance under the counter for the motor The motor will extend about 3 0 in 7 6 cm below the counter but it is best to allow at least 10 0 in 25 4 cm from the under counter to shelves or any other equipment under the counter Also when using the removable cover design the back of the hole must be at least 4 3 in 10 8 cm from any wall to allow for cover door clearance An extra 4 0 in 10 2 cm of open space above the top of the cover will be needed for placement and removal of the In Counter machine e If installing unit into a cabinet with doors including cabinets
30. utton 4 Ice Cream Drinks blends drinks containing hard ice cream to a thick shake consistency 28 Button 5 Double and hard to blend ice cream drinks 20 Button 6 Thick Hard to blend Smoothie blends thick frozen fruit amp hard ingredients for a thick but consistent smoothie 28 Blending Tips 1 Place liquids and soft foods in the container first solid items and ice last Although not necessary for processing you may want to cut or break food into smaller pieces for more precise measuring of ingredients Thawed or partially thawed fruit is recommended 2 As a general rule compared to other blenders you do not need as much ice to make an equally frozen drink in The Quiet One If your recipe freezes up try reducing the amount of ice 3 Set the container on the motor base by aligning it over the centering pad anchored to the base Motor must be completely stopped before positioning container Containers are not to be used for hard dry materials Avoid running your machine with the container empty 4 Always use a lid that is securely attached when blending 5 Plug the machine into the nearest outlet if unplugged Press the On Off switch to On Select desired programmed setting by pressing any of the Pre Set buttons 1 through 6 The machine will immediately begin to cycle through the selected program and turn off when the program is complete NOTE Each button has a different pre selected combination of speed
31. y Livonia MI 800 521 8140 Wesmar Company Inc Seattle WA 206 783 5344 www wesmar com Anderson Chemical Co Litchfield MN 800 366 2477 www andersonchemical com Ecolab Inc St Paul MN 800 352 5326 www ecolab com Diversey Livonia MI 800 521 8140 Container Do not let mixtures liquids or food products dry in the container Rinse after use Dry product may lock around the blade and weaken tear the bearings seal when restarted Do not place containers in the freezer Extremely low temperature combined with hot ingredients and or the immediate rapid action of the blade may crack the container Due to the nature of polycarbonates used in the Advance containers and the sound cover assembly microwaving and automatic dishwashing are not recommended ey the cleaning instructions on page 21 Motor Base Control Panel 1 Unplug the power cord 2 Gently wash the outside surface with a damp soft cotton cloth moistened with a mild solution of warm water and nonabrasive detergent or nonabrasive liquid spray cleaner Be careful to not scratch or scrub the display window on the control panel Never immerse motor base in water or other liquid Dry with a soft cotton cloth Lid Wash in warm soapy water Rinse clean under running water and dry Cover Door The cover can be removed see pages 14 and 15 and cleaned by placing under running water and washing with a soft cloth Wipe dry and replace back on the base Sound
Download Pdf Manuals
Related Search