Ghost – Eye Wireless Video Transmission Kit 150M
Contents
1. Mi Frequency selection and configuration The wireless suite can work in 5 1 5 9GHz frequency band and be flexibly software configured to licensed or ISM band of global different regions as well as the side panel of both transmitter and receiver has been installed a frequency select knob which provide maximum 10 workable frequency ch annels and support maximum 4 sets working simultaneously See below fre quency knob figure 2015 SFAIMO INC All Rights Reserved Maintenance E Storage conditions Products storage temperature should be 20 C 60 C For long time storage requirement please use original carbon boxes and avoid from high humid acid base or dusty place E Maintenance Warning To ensure your safety place choose original adapters And provide stable AC input according to this manual Trouble shooting E Normal problems a No output on display Check TX and RX power first and see if TX or RX battery is existed then check if TX antenna and RX antenna installed right After that check Video indicator if TX Video indicator is not light then check SDI or HDMI cable is plugged in and video source is ready please Finally may check input video format is compatible with this product specs b Poor output video quality Check if SDI or HDMI input or output cable is plugged well then check how many receiver side RSSI LEDs is lit there should be 2 3 RSSI LED lit if the user want to get b2. Note The devices support broadcasting mode as factory setting User just need to set the TX amp RX to the same channel and the RX device will be linked wirelessly to TX NI20 A wW Hiin 2 g VIDEO EH HDMI SDI OK HA IWOH A 2015 SFAIMO INC All Rights Reserved Installation For Receiver 1 Fix the antennas to the transmitter and arrange them to be right angle as figured below to get better performance 2 Connect the SDI HDMI cable to the TV Monitor O39 Goo d D 10 y 0 lt Q atl re lt a gt eee CE 5 HDMI OUT DIN HDTV Monitor 3 Connect the receiver to the power supply via the power cable then turn ON the power supply and make sure the receiver start to work Portable Battery POWER DC12V Adaptor 4 Pressthe CH button to select the wireless channel that be the same to the Transmitter then press the OK button to confirm When the Networking is connected the LCD Screen will display LINK When the video is transferred the LCD Screen will display VIDEO Then the screen of TV Monitor will display the HD imag
3. USER MANUAL GHOST EYE GHOST EYE C C C CINEGEAR 150M KIT 400M KIT 1LINS NOISSINSNWUL OJ0IA ICS INGH SSINJYIM JAT LSOHS NT LD 2015 SFAIMO INC All Rights Reserved GHOSTEYE 400M KIT Full HD SDI amp Very Low Video HDMI Latency EU Environmental Protection Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with you local authority or retailer for recycling advice 1LINS NOISSINSNUAL OA0IR 1OS INOH SSTIZHIM 3A3 LSOH9 NT LD 2015 SFAIMO INC All Rights Reserved This instructional user manual and all the related documents are subject to change at the sole discretion of SFAIMO INC SFAIMO reserves the right to make changes and improvements to any of the products described without prior notice Under no circumstances shall SFAIMO be responsible for any loss of income or any special incidental consequential or indirect damages howsoever caused For up to date product information visit https www ghosteye com on the support page Please read this user instruction manual to become familiar with the features of GHOSTEYE series before operating Failure to operate the product correctly can result in damage to the product or interfere to other devices This is a sophisticated product which must be operated with caution and common sense Failure to operate this product properly might result in disturbing some
4. and 2 This device must accept any interference received includinginterference that may cause NNCautions The manufacturer is not responsible for any radio or TV interference caused by unauthorized undesired operation modifications to this equipment Such modificationscould void the user authority to operate the equipment 2015 SFAIMO INC All Rights Reserved GHOSTEYE 150M KIT DD CO GHOST EYE GHOST EVE CC CINEGEARS Full HD SDI amp Very Low Plug amp Rugged Video HDMI Latency Play Design EU Environmental Protection Waste electrical products should not be disposed of with household waste Please recycle where facilities exist Check with you local authority or retailer for recycling advice ET 1LINS NOISSINSNUAL OA0IR 1GS INGH SSTIAIM JAT LSOHS XC LD 2015 SFAIMO INC All Rights Reserved Product model and standard The Long Range Wireless HDMI SDI Transmission Suite utilize today s most advanced wireless video transmission technology which can real ize the broadcast class and uncompressed 3G SDI HDMI HD video sig nal transmitted with no compression and zero delay The suite include one transmitter and one receiver where the transmitter provides a 3G H D SDI input and a HDMI input and the receiver also provide a 3G HD SD output and a HDMI output The wireless HD suite has 2 stick antennas in transmitter side and 5 internal antennas in receiver sid
5. FORE APPLIES TO POWER SUPPLY Supports V Mount Connection 1 4 Hot shoe Connection ge 2015 SFAIMO INC All Rights Reserved Receiver mechanic information moo Glee 0000 GS 0 0 ee 6 LCD Display Any KP Channel Button N i HDMI SDI ii fs SDIOUT 6 Button L OK Button for 4 Confirmation Q f HDMI OUT gt lt Z C W AE Sw LL Ezre Antenna Connectors Antenna Antenna Connector Connector V Mount Connection 1 4 Hot Shoe Connection A ae Mini USB 4 i J Ia nOn Power Supply lt D IN Lemo 6V 17V lt DCIN A E Power ON OFF pas POWER ON OFF RER N gr 4 20 7 ESNS 1 4 Hot Shoe Connection 2015 SFAIMO INC All Rights Reserved 1 LCD Display Displays information of Channel input selection signal status and battery capacity Channel Select Button Select the same channel to TX HDMI SDI Button Select HDMI or SDI OUTPUT to the display device OK Button for Confirmation Confirm the Selection SDI OUT Connect to the HD Digital Monitor which support 3G SDI HD SDI HDMI OUT Connect to the HD Display TV Monitor w
6. al status Power Info Working Voltage 6V 17V Power Consumption 7 8W Dimensions 119x79x32 mm Temperature 10 60 C Operating 40 80 C Storage Receiver Antenna External Antenna X 5 pcs Receiving Sensitivity 70dBm SDI Dual Output HDMI Output Mini USB LEMO Power IN Functional Interface Antenna RPSMA Socket Power ON OFF Locating Structure 1 4 Hot shoe connection V Mount Optional LCD Display Wireless Channel Info SDI HDMI Input Info Signal status Power Info Working Voltage 6V 17V Power Consumption 7 8W Dimensions 155x111x32 mm Temperature 10 60 C Operating 40 80 C Storage Since the product s improving process all the performance design and specifications of our products are subject to minor change without prior notice 2015 SFAIMO INC All Rights Reserved Transmitter mechanic information LCD Display Channel Select Botton HDMI SDI Button OK Button for Confirmation Antenna Connectors o EEE V Mount Connection 1 4 Hot shoe Connection 1 4 Hot shoe Connection 6V 17V Power Supply IN Lemo HDMI IN SDI OUT Loop SDIIN Power ON OFF D MINI USB 2015 SFAIMO INC All Rights Reserved Structure Power Supply IN Lemo Support 6 17V Support connecting to the power supply of the camera or power adaptor Notice BE AWARE OF POLARITY BE
7. amera c Install battery into battery buckle if your product model includes battery buckle options please note the battery model must match the battery buckle type d The user can also utilize a subsidiary D type to 3mm screw female DC jack cable to get power input from an outside power source e All TX installation guidelines see below figure Qe ETS E 2015 SFAIMO INC All Rights Reserved Installation Receiver side a There is one 1 4 20 screw nut in the bottom side of receiver The user can utilize a 7 articulating arm and crab clam to install the receiver on one tripod b Install battery into battery buckle if your product model includes the option of battery buckles please note the battery model must match the battery buckle type c The user can also utilize a subsidiary D type to 3mm screw female DC jack cable to get power from an outside power source d All RX installation guidelines see below figure 2015 SFAIMO INC All Rights Reserved Installation e Typical connection instruction Connect camera SDI or HDMI output to transmitter SDI or HDMI input port and the transmitter can fixed in hot shoe port of the
8. camera Connect HDM or SDI output port of the receiver to SDI or HDMI input port of the HD moni tor Make sure all antennas and batteries are equipped normally See below diagram eee ee ee ee SS aa ma d Movie camera Monitor 11 2015 CINEGEARS All Rights Reserved Installation Getting started a Ensure the video source output of the camera is OK and the HD monitor IS power on and switched to connected video input port b Ensure all input output SDI or HDMI cables are connected c Ensure 2 TX antennas are installed and it is better to keep TX 2 antennas with orthogonal angle each other for best RF performance Like below figure Transmitter d Ensure both the transmitter and receiver installed the battery or DC input port connected to outside power source Then turn power switch of tra nsmitter and receiver to ON respectively then Power indicator will light 2015 SFAIMO INC All Rights Reserved Installation e Ensure the frequency knobs of transmitter and receiver are set with the same number and this will make sure the transmitter and receiver work with same RF frequency f If the camera is on and video input is OK TX side video indicator will light g Before RX finished wireless link with TX 4 RSSI indicators and Video indicators are off when wireless link is OK RSSI indicators will light first and RSSI will indicate the rec
9. e and it can work in 5 1 5 9GHz frequency band and be flexibly software configured to lic ensed or ISM band of global different regions as well as the side panel of both transmitter and receiver has been installed a frequency select k nob which provide maximum 10 workable frequency channels and sup port maximum 4 sets working simultaneously The wireless suite can a ccept wide range DC power input which is suitable for many kinds of c amera battery model The suite also can sustain 8 kV ESD HBM co ntact discharge the industry class metal case and professional heat de sign would guarantee most robust reliability 2015 SFAIMO INC All Rights Reserved E Main features HDMI 1 3 spec supports HDMI and SD HD 3G SDI input and output Highest resolution 1080p 60 no delay and no compression Support audio formats include Dolby True HD DTS master etc AES 128 encryption with air interface HD video data stream Support point to point and point to multi point network topology 5GHz ISM frequency band maximum 10 frequency channel selected by user knob coexist with WIFI RX built in antenna more compact Maximum transmission distance 120m Signal indicators for wireless power status Video status and receiver RSSI Wide range power voltage input adapt most kinds of camera battery Optional Sony F970 battery buckle convenient for field battery install and replacement Any input and output ports w
10. eived RF signal strength If the receiver d etects wireless video normal internally from air interface Video indicator will light Before that if SDI or HDMI video out port of the receiver has HD monitor connected it will display an OSD of Link Connecting like below picture Link Connecting h The system will spend 20 30 seconds on constructing the link and real link period will depend on the current wireless channel condition When wireless link is set up RSS light will light and indicate current received wireless si gnal strength as well Video indicators will light and then connected HD monitor will display the video and audio accordingly 2015 SFAIMO INC All Rights Reserved Operation instruction Mi Input video port selection of transmitter The transmitter has a 3G SDI video input port and a HDMI video input port and the system will detect valid video source automatically of SDI and HDMI port and then switch it as main video input channel If both SDI and HDMI h ave valid video input the system will take SDI input as priority BRSSI indicators The receiver will calculate received RF signal strength internally and 5 RSSI LEDs will be used to indicate wireless signal power and quality The user can observe the RSSI LED status to know if the current wireless link is reliable or not From 1 to 5 lit LEDs show RSSI from Min to Max 1 or no lit LED Visible Video Noise W
11. es simultaneously from the video source gt TITA LING VIDEO p O Dakem CH HDMI SDI OK 2015 SFAIMO INC All Rights Reserved Trouble shooting Displaying Link Connecting foralong time Transmitter is not powered up Transmitter or receiver is not placed correctly The transmitter and receiver are too far away Several solid wall partition TX and RX There are too many obstacles between TX and RX Other transmitter is working on the same or adjacent channel No Video Signal received Transmitter and video source are not connected OSD Information on TV The video source is turned OFF Video source were NOT switched to SDI HDMI output Bad contact of cable of transmitter Abnormal working of transmitter Problem with cable betweenTX and video source Player NOT support the output resolution format The TV Monitor NOT support HDCP authentication No signal input to Receiver or TV Monitor Receiver is turned OFF Receiver and TV are not connected TV Monitor NOT switched to SDI HDMI input Bad contact of the cable of receiver or TV monitor TV Monitor turn into standby mode Abnormal working of receiver Image No image appear on TV Monitor Bad contact of receiver or cable Abnormal working of receiver Receiver failure Abnormal color on TV screen Bad contact of cable of receiver or TV moniter Bad contact of cable of transmitter or video source Ab
12. etter video quality if there is only 1 RSSI LED or no LED lit that means the received wireless signal is weak and should decrease the transmission distance or try to change to other frequency channels in case some exist interference 2015 SFAIMO All Rights Reserved Address 205 8105 Birch Bay Square ST Blaine WA 98230 USA Website www ghosteye com Email support ghosteye com TEL 1 415 992 7355 USA Toll Free 1 800 369 8883 2015 SFAIMO INC All Rights Reserved N 1LINS NOISSINSNUEL OJOIA IOS INOH SSINYIM JATISO0OHI NT LD
13. ge or result caused by using other adapters instead of our standard adapters Special Notice e Although the product has provided the function of data encryption when transmitting you still need to pay attention to deliberate signal interception There will be the Possibility of a third party intentionally intercept the transmission signal since the product adopt wireless communication Please do not use the product on confidential and important communications or life related communications The main concern is that the content of wireless communication might be received by the third party s wireless devices deliberately or accidentally e The impact of radio waves such as the following environment may cause the abnormal audio and video blocked image noise etc 1 Transmit near the wall which is hard for the radio waves to get through 2 Quite close to the refrigerator metal fitment and appliances or next to the crowded situation e This product has been tested and manufactured to comply with national electrical safety rules however there will be noise caused by the interference with other machines in rare cases If the interference is happened please keep a certain distance away from other machines e The product is susceptible to interference from 5GHz wireless local area network or other wireless devices e Optimal range between transmitter and receiver is between 1 meter and 300 meters within line of sight e Please do
14. ith 8 kV ESD protection level HBM contact discharge ndustrial metal case stable and reliable 2015 SFAIMO INC All Rights Reserved E Parameters Transmitter Receiver SDI Input BNC Female HDMI SDI Output BNC Female HDMI Input Type A female 2 Antenna port RP Output Type A female DC input SMA male DC input Interface Supply voltage range 7 36V DC Power consumption lt 6W lt 7W Lx W x H 115x 67 x 23mm don t include antennas Mass Weight 270g 355g HDMI 525i 625i 720p 50 59 94 60 1080i 50 59 94 60 1080p23 98 24 25 2 9 9 30 50 59 94 60 HDMI Type A Size Ex W x H 152x 95 x 23mm Input Video Format SDI 3G HD and SD SDI auto selected SMPTE 259 274 292 296 372 424 425 1x BNC HDMI 525i 625i 720p 50 59 94 60 1080i 50 59 94 60 1080p23 98 24 25 2 9 9 30 50 59 94 60 HDMI Type A tput V F t gi Put Video QUE SDI 3G HD and SD SDI auto selected SMPTE 259 274 292 296 372 424 425 1x BNC Input Audio Format SDI embedded 2 channel 24 bit 48KHz POWER Green Wireless RSSI Blue 4 LEDs POWER VIDEO Yellow Signal Indicator POWER Green VIDEO Yellow meeauency Bang Ze AE COTE MELE with China 2o ne CoM eel Ne with China North American Europe etc North American Europe etc Modulation Mode OFDM 16QAM Transmission Power Maximum 18dBm Receiver Sensitivity 75dBm Occupied Bandwidth 40MHz 40MHz Temperate Roger 07 ann conn Comp
15. ith HDMI Input Antenna Connectors RPSMA Connectors for Antennas 1 4 Hot shoe Connection Supports Hot shoe Mounting Mini USB For System Upgrading Power Supply IN Lemo Support 6 17V Support connecting to the power supply of the camera or power adaptor Notice BE AWARE OF POLARITY BEFORE APPLIES TO POWER SUPPLY Power ON OFF Power ON OFF q V Mount Connection Optional Support V Mount Connection a a 2015 SFAIMO INC All Rights Reserved Installation For transmitter 1 Fix the antennas to the transmitter and arrange them to be right angle as figured below to get better performance CRT oK 2 Connect the transmitter to the power supply Connect the SDI HDMI cable to the Video Source RE OO a jl Portable DC12V l Io Battery Adaptor i 000 l 000 I l a SD aaa L D HDMIIN al ll MR SDI OUT HD Video Source tl SDIIN iol E IR TV Monitor 3 Turn ON the power supply and make sure the transmitter start to work 4 Pressthe CH button to select the wireless channel that corresponding to the Receiver then press the OK button to confirm When the video is transferred the LCD Screen will display VIDEO
16. liance FCG CE ECG CE 2015 SFAIMO INC All Rights Reserved About Hi Parameters Transmitter 1 1 4 20 Screw Hole 2 RP SMA male antenna connector 3 Video input indicator 1 yellow LED 4 Power on Indicator 1 green LED 5 Frequency selection knob 0 9 6 SD HD 3G SDI input 7 HDMI Input 8 DC power switch 9 DC input LEMO 4 pin B series connector 2015 SFAIMO INC All Rights Reserved Parameters Receiver 1 1 4 20 Screw Hole 2 LED status indication 4 blue LED for RSSI amp 1 LED yellow for POWER VIDEO 3 Frequency selection knob 0 9 4 SD HD 3G SDI output 5 HDMI output 6 DC power switch 7 DC input LEMO 4 pin B series connector 2015 SFAIMO INC All Rights Reserved What is included 1 unit transmitter 1 unit receiver SONY NP F970 PananonicD28s Canon 5D2 batter buckle Optional 62 pcs 5GHZ omni directional and high efficiency antennas SMA female 671 user manual 310 190 93mm water proof foamed case 2015 SFAIMO INC All Rights Reserved Installation installation details and cautions e Transmitter side a Install 2 Omni directional and high efficiency antennas to transmitter s RP SMA female antenna connectors b There is one1 4 20 screw in transmitter metal case which are located on the bottom of case So the user can utilize a 1 4 screw to 50518 hot shoe converter fix the transmitter into c
17. nerates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occurin a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help To assure continued compliance any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment Example use only shielded interface cables when connecting to computer or peripheral devices N FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment This transmitter must not be co located or operating in conjunction with any other antenna or transmitter This equipment complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference
18. normal working of transmitter or receiver Power on the transmitter Place the TX or RX correctly Move the receiver closer to the transmitter Reduce the number of solid walls between TX and RX Move the receiver closer to the transmitter Turn off other transmitter or change channel Connect the transmitter to video source by SDI HDMI cable Power ON the video source Switch the Video source to SDI HDMI output Remove and then re plug the cable of transmitter Reboot the transmitter Change the SDI HDMI cable Switch the output video resolution to other modes Replaced with HDCP certified TV Monitor Power on receiver Connect receiver to TV Monitor via SDI HDMI cable Switch TV Monitor to SDI HDMI input Remove then re plug the SDI HDMI cable Switch the TV Monitor to normal operation mode Reboot the receiver Re plug the cable of the receiver or TV Monitor Reboot the receiver Please contact your retailer Unplug and then plug the HDMI cable of the receiver or TV Unplug and then plug the HDMI cable of the TX and player Reboot the transmitter and receiver 2015 SFAIMO INC All Rights Reserved Statements gt FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment ge
19. not set up the transmitter and receiver in metal shelf or it will hinder the wireless communications e 1080P 60Hz Wireless transmitting e It will take 15 20 seconds to boot the system before wireless communication start the media receiver can not be operated during this time 2015 SFAIMO INC All Rights Reserved Brief Introduction The system is designed to replace the current widely used cables in the live broadcasting and production environments Cables always suffer from wiring hassles and sometimes just impossible to have cables This wireless HD video transmission system supports good wireless coverage plug and play industry standard power and video interfaces and will provide you State Of Art picture quality with very low latency in both indoor and outdoor applications The Wireless HD Video Link system can be used in film production live broadcasting as well as many other applications which requires good quality wireless video connections such as wedding and conferences Features e 5GHz ISM Band Wireless HD Video transmission e Supports multiple channel switching and broadcast mode for 1 transmitter to multiple receivers e Supports up to 1080p 60Hz resolution HDMI HD SDI 3G SDI 4 2 2 10bits color depth e Uncompromised picture quality with very low latency lt 30ms e Effective range 300m 1000ft Line of sight e HDMI 1 3 with EDID support e Plug amp Play fully hardware design no software is req
20. other equipment on the film set This product is not intended for use by children without direct adult supervision Do not use with incompatible components or alter this product in any way outside of the documents provided by GHOSTEYE These Safety Guidelines contain instructions for installation operation and maintenance It is essential to read and follow all of the instructions in this manual and all the notices and warnings in about 150M and 400M as well prior to assembly setup or use in order to operate the product correctly and avoid damage or interfering 1 Do not use this product in the extreme hot cold dusty or humid envir onments 2 Prevent friction with hard objects 3 Avoid the product falling down from a high place or it may damage the hardware 4 The product is not water proofed So do not get any liquid into the unit please 5 Do not dismantle assemble or alter the product arbitrarily 2015 SFAIMO INC All Rights Reserved Important Information Please read this user manual before you use this product it contains all the notes and impor tant things regarding operating this product In accordance with the safety precautions and operating instructions listed on this user manual our applies provided the product is handled properly for its intended use but may not apply to below cases e Repairs or product modification and alterations have been executed by unauthorized personnel e The damages are caused b
21. uired e AES128 256 Encryption 2015 SFAIMO INC All Rights Reserved What is included Please check the packing list carefully after unpacking if any partis missing please contact your dealer g P Wireless HD Antennas X 2 P Tap to Lemo 2 pin Hot shoe transmitter X 1 Power Cable Stand x 1 X1 DC Adapter X 1 V Mount X1 12V 2A Lemo 2 pin Optional Optional va Hot shoe HDMI Cable X 1 Wireless HD Antennas X 5 a Stand x 1 Receiver X 1 DC Adapter X 1 V Mount X1 P Tap to Lemo 2 pin 12V 2A Lemo 2 pin Optional Power Cable X 1 Optional Accessories in package may vary according to certain conditions in different country region please check out the conten 2015 SFAIMO INC All Rights Reserved Specifications Frequency 5 1 5 9 GHZ Subject to different RF regulations in different regions Bandwidth 4OMHz 1080p 23 98 24 25 30 50 60 1080psf 23 98 24 25 1080i 50 59 94 60 720p 50 59 94 60 576p 576i 480p 480i Video Formats Audio Formats Supported PCM DTS HD Dolby TrueHD Time Code SMPTE 12M Transmission range gt 300m Line of sight Transmitter Antenna External Antenna X 2 pcs 20dBm HDMI Input SDI Input SDI Loop Output Mini USB LEMO Power IN Antenna RPSMA Socket Power ON OFF Transmission Power Functional Interface Mounting Structure 1 4 Hot shoe connection V Mount Optional LCD Display Wireless Channel Info SDI HDMI Input Info Sign
22. where people pass by frequently e Power overloading Avoid overloading wall s electrical outlets and extension cord or other multi socket otherwise could result in electric shock or fire e Lightning For protection from lightning or when the product is left unattended for a long period please disconnect it from the power source e Please disconnect the power cord from the power outlet when you are not using the receiver and transmitter this will reduce the risk of electric shock or fire 2015 SFAIMO INC All Rights Reserved e This product should not be exposed to dripping or splashing Do not place any object filled with liquid on the product eg vases e To avoid electric shock please do not block or stick anything on the air vent of product do not remove the cover or put the object just like pins steel wire into the gap of the air vent e Please place the receiver transmitter on a flat with hard and stable surface e Ventilation please do not block the air vents on the receiver transmitter or place any heavy object on top of them Blocking the air flow can damage the product itself Please make sure that there is adequate ventilation distance between the receiver and TV and also put the product away from direct sunlight or any source of heat e Water Exposure To reduce the risk of electric shock or fire please do not expose the receiver transmitter to rain or moisture e We assume no responsibility for any dama
23. y accidents including but not limited to lightning fire exposed to rain or water and moisture e Do not use provided power adapter with specific power voltage which are not compliant with the rated voltage range in the attached label of the power adapter in package e The model label on the product has been modified or the warranty tag has been removed by unauthorized personnel A Safety Precaution To reduce the risks of electricity do not remove or open the cover No user serviceable parts are inside Please return to Original factory for maintenance igh voltage The high temperature in the process of operating the device hot surfaces Please use our standard power adapter Detailed information Please refer to the rated voltage range showed on the label at the back of package s power adapter A Danger Be careful with electricity may cause the high risk of scalding e As connecting any equipment such as any player or TV etc please turn off the power to the product before any operation is undertaken e Power outlet To prevent electric shock or fire short circuit please make sure the type of electrical plug used on the receiver s and transmitter s power cord are compliant with the rated voltage range in the attached label of the power adapter in package e Power cord Do not place any heavy articles above on the power cord To avoid being stepped on or pinched by heavy items the power cord should not be located on the place
Download Pdf Manuals
Related Search