one for all sv 1710 video sender
Contents
1. The picture on your second TV is not correct Select EXT or AV on second TV Make sure that the video source is switched on Using a remote control you cannot control the video source from your second TV Aim the remote control directly at the RECEIVER unit and ensure that there are no obstades in between Ensure that there is no other wireless device wireless headphones speakers RF control signals interfering with the remote control Make sure that TRANSMITTER and RECEIVER are more than 16 ft 5 m apart Make sure to use the remote control of the video source Reposition the IR Eye on the video source OR place the IR Eye 2 4 inch 5 10 cm in front of the video source Buzzing sound when using the remote control With some types of TV you will not be able to solve this problem S VHS video shows no colour pictures only black and white Select CVBS video output format for your SVHS VCR e DVD player gives no pictures on either main or second TV Select CVBS video output format for your DVD player check the DVD player s user manual Customer Service Please read the instruction manual carefully If you still experience problems operating the Wireless Audio Video Sender SV 1710 you may contact us at ofahelpQuebv com Just send blank message you will get auto reply www oneforall com 8 WWWONEFORALL COM2. Make sure that the SCART is connected to the correct Input of the device normally called Line In Insert the adapter plug into the connector on the backside If you want to control the source device place the RECEIVER on top or beside the destination device where it is able to catch the IR command from your remote control 6 WWWONEFORALL COM Getting Started Now that both units are connected you can switch ON the units using the ON OFF switch The red LED on the front should light up Place the units as high as possible to avoid interference of any kind TRANSMITTER RECEIVER The following paragraphs contain a few examples EXAMPLE 1 Play video on the VCR source in the living room and watch the picture on the TV destination in the bedroom Connect the TRANSMITTER to the VCR and the RECEIVER to the TV in the bedroom Switch on the video and insert a tape Place the TRANSMITTER on top of the VCR aligned see A OR the IR eye on in front of the IR receiver of the VCR see B Switch on the TV in the bedroom Select the mode on the TV for Line In AV EXT or channel 0 Aim the VCR remote control or a universal remote control to the RECEIVER unit and press play The video should start playing and picture and sound should appear on your bedroom TV screen EXAMPLE 2 If you do not have coax cable connection with the TV in the bedroom you can tune in the channels on your VCR source in the living room and watch the
3. ITTER is done by an RCA to SCART cable included in package The Audio and or video signals are transformed to a 2 4GHz frequency that will be sent via the built in antenna Furthermore the TRANSMITTER transforms the Remote Control Extender signal at 433 92 MHz back to an IR command RECEIVER The RECEIVER operates on 18 Volts DC 300mA that is supplied by the AC DC Adapter included in package Connecting from the audio or video device to the RECEIVER is done by an RCA to SCART cable induded in package The high frequency signal 2 4GHz received by this unit are captured by the built in antenna of the RECEIVER unit and will be transformed into the original audio and video signals Secondly the RECEIVER has a built in remote control extender When an infra red signal is Received by the RECEIVER it will transform the IR command to 433 92 MHz and can be sent through walls and ceilings Please note that this feature is only accessable for devices that are control led via IR infra red signals at a frequency of 30 60 kHz This feature does not support the 2 way IRDA waveform If you are unsure of the details of the remote control IR output please refer to the manual of the original device or contact your cable supplier WWWONEFORALL COM 5 Installation See page 3 fold out page 1 Before starting the installation make sure that both the TRANSMITTER and RECEIVER are switched off OFF O C 2 Connecting the TRANSMITTER
4. SV 1710 702363 UK Wireless Audio Video Sender 4 lt gt 4 gt CSF lt gt SDK LE TRANSMITTER RECEIVER TRANSMITTER TRANSMITTER Aligned VCR SAT IR receiver RECEIVER WWWONEFORALL COM 3 UK Table of Contents UK INE Product PT 5 Installation 6 Getting started 7 Trouble Shooting ERR REOR en ho OE Re RR Rn res 8 Customer SEVICE a oes adobe nes d Sce y ek RUE GE RE Ra OE edet a 8 Thank you for purchasing the ONE FOR ALL Wireless Audio Video AV Sender SV 1710 ONE FOR ALL is continuously striving to develop produce and market high quality innovative products to remotely control your equipment We hope the Wireless AV Sender will give you the freedom of wireless control Your ONE FOR ALL Wireless AV Sender can be connected to all your audio and video equipment Safety Precautions Do not attempt to service this product in case of technical difficulties mail to ofahelpQuebv com just send blank message you will get auto reply This product should only be used with the AC power adapters included or a type that complies with safety standard EN60065 and that has the following specification 18 Volt DC 300mA This product should not be exposed to high temperatures This product should not be used in damp places or dose to water The AC power adapters
5. Use the cable labeled TRANSMITTER Connect the RCA plugs Red White and Yellow to the corresponding connectors of the TRANSMITTER unit Connect the SCART connector to the device that you select for supplying the picture source device Make sure that the SCART is connected to the correct Output of the device normally called Line Out TRANSMITTER RECEIVER If you wish to remotely control the source device satellite receiver video recorder camcorder DVD player digital or analogue Set Top Box or Pay TV decoder box from another room for example to change channels on your satellite receiver you will need to either A Place the TRANSMITTER on top of the source device Make sure that the front side of the TRANSMITTER is aligned with the front side of the source device OR Place the TRANSMITTER next close to the source device and connect the IR eye to the TRANSMITTER Place the IR eye directly on the IR receiver window on the front side of the source device OR in front of the source device make sure there is no interference of the IR Eye signal going to the IR receiver of the source device Now insert the adapter plug into the connector on the backside 3 Connecting the RECEIVER Use the cable labeled RECEIVER Connect the RCA plugs Red White and Yellow to the corresponding connectors of the RECEIVER unit Connect the SCART connector to the device you selected for displaying the picture destination
6. e on the TV for Line In AV EXT or channel 0 You can take the remote of your Satellite Receiver or a ONE FOR ALL universal remote to your bedroom to control your TV channels tuned in your Satellite Receiver WWW OWEFORALLCOM 7 Trouble Shooting Problem 8 Solution If your house has a heavy metal construction or is equipped with a PC network it can disturb the radio signal Even moving the units a few inches can improve the performance If this doesn t work try to move the TRANSMITTER and RECEIVER to another place in the house If you experience problems try placing the units away from electrical appliances No picture on second TV Make sure that the TRANSMITTER and RECEIVER are switched ON Select EXT or AV on second TV Make sure that all cables are connected correctly Make sure that the video source satellite recelver video recorder camcorder DVD player digital or analogue Set Top Box or Pay TV decoder box is switched on Make sure to use the correct SCART connector of the video source check manual of video source Example EXT1 or EXT2 Bad picture sound quality on second TV Try to find out if the way the cables are placed cause interference Make sure that the distance between the TRANSMITTER and RECEIVER unit is less than 100 ft 30 m Picture of selected TV channel disappears snow picture Disable the auto standby mode of the VCR check the manual of the VCR how to do this
7. picture on the TV destination in the bedroom You may need the manual of your VCR to tune in the TV channels Once all channels are tuned in you are able to watch your TV channels through your AV channel Connect the TRANSMITTER to the VCR and the RECEIVER to the TV in the bedroom Switch on the video Place the TRANSMITTER on top of the VCR see A OR the IR eye on in front of the IR receiver of the VCR see B Switch on the TV in the bedroom Select the mode on the TV for Line In AV EXT or channel 0 You can take the remote of your VCR or a ONE FOR ALL universal remote to your bedroom to control your TV channels tuned in your VCR EXAMPLE 3 Also if you do not have coax cable connection with the TV in the bedroom the AV Sender gives the possibility to view your Satellite Receiver source programs also on the TV destination in the bedroom You probably already tuned in the channels on your Satellite Receiver If not you may need the manual of your Satellite Receiver to tune in the TV channels Once all channels are tuned in you are able to watch your TV channels through your AV channel or other output channel Connect the TRANSMITTER to the Satellite Receiver and the RECEIVER to the TV in the bedroom Switch on the Satellite Receiver Place the TRANSMITTER on top of the Satellite Receiver see A OR the IR eye on in front of the IR receiver of the Satellite Receiver see B Switch on the TV in the bedroom Select the mod
8. should only be connected to a power supply of 220 240 VAC 50Hz This product should not be covered nadequately protected or sensitive electronic equipment may be affected by the use of this product This interference can lead to damage to either equipment Before you start please check whether or not this product can affect surrounding equipment WWWONEFORALL COM 4 The Product The Wireless Audio Video Sender SV 1710 is a solution for distributing audio and video signals to every place in the house without the need of wires The AV Sender gives you the possibility to view any video source satellite receiver video recorder camcorder DVD player digital or analogue Set Top Box or Pay TV decoder box on your second TV in your home The ONE FOR ALL Wireless AV Sender SV 1710 package contains TRANSMITTER unit RECEIVER unit Infra red IR Eye Two Power adapters Two RCA to SCART cables The TRANSMITTER sends the audio and video signals from the source device VCR DVD SATELLITE CABLE BOX CAMCORDER etc by 2 4 GHz to the RECEIVER that is connected to the destination device The built in Remote Control Extender sends the IR signal in the opposite direction from RECEIVER unit to TRANSMITTER unit at a frequency of 433 92 MHz TRANSMITTER The TRANSMITTER operates on 18 Volts DC 300mA that is supplied by the AC DC Adapter included in package Connecting from the audio or video device to the TRANSM
Download Pdf Manuals
Related Search