Manual - Proscale
Contents
1. Proseale SIMPLEX SK USER MANUAL Thank you for purchasing a PROSCALE SIMPLEX digital scale Please read all operating instructions carefully before use This electronic scale is a precision instrument With normal care and proper treatment it will provide years of reliable service Never load the scale with more than the maximum capacity Overloading will permanently damage it Avoiding any exposure to extreme heat or cold your scale works better when operated at normal room temperature Always allow the scale to acclimate to normal room temperature for at least one hour before use Give your scale sufficient warm up time Usually 30 60 seconds before calibration to give the internal components a chance to stabilize Keep your scale in a clean environment Dust dirt moisture vibration air currents and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale Handle with care Gently apply all items to be weighed onto tray top Although this scale is designed to be quite durable try to avoid rough treatment as this may permanently damage the internal sensor Avoid shaking dropping or otherwise shocking the scale This is a precision instrument and must be handled with extreme care OPERATION 1 Place scale on a horizontal flat surface press ON OFF key to turn on the scale 2 Wait until 0 0 is displayed 3 Put the object s on the weighing platform 4 Us2. ing the MODE key you can change the weighing units TARE 1 Turn on scale as described above 2 Place the tare item on the platform 3 Press TARE and wait until 0 0 is displayed 4 Add the net weight item COUNTING PCS MODE 1 Turn on scale as described above 2 Press amp hold PCS unil PCS flashes on the display 3 Now press MODE to toggles the sample size 25 50 75 or 100 4 Place the exact quantity of samples desired on the platform and press PCS 5 Place the items that you want counted onto the tray and the total number of items will show on the display 6 Press MODE to return to normal weighing mode CALIBRATION 1 Place the scale on a stable surface and turn on the scale 2 Press and hold MODE button and release when the display shows CAL 3 Press MODE again the LCD display will show the required calibration weight 300g or 500g 4 Gently place the required weight on the scale and and wait 3 seconds 5 The display will show PASS when calibration is complete and return to the normal weighing mode Tare Range Full capacity Auto Off 60 seconds off Op Temp 15 to 30 degrees C Display LOD 5 digits Power 2x AAA Scale Dim 120x65x17mm Tray 75mm x65 mm Capacity 300G 500g Readability 0 01g 0 1g Modes g gn ct dwt pcs Calibration 300g 500g www proscale net
Download Pdf Manuals
Related Search