USER MANUAL - Mega Systems
Contents
1. Color Soler Snap sow to fast _ slow to fast Pp White No Function Function Macro Rigging the fixture Caution 1 The installations must be carried out by an authorized dealer or trained professional 2 Unit may cause severe injures if you have doubts concerning the safety do not install 3 Unit is to be 24inches away from flammable materials decoration material 4 Use high quality installation equipment to hang unit When rigging a unit it is very important that you follow common safety procedures Rigging requires extensive experi ence including but not limited to calculating working loads material being used and periodic safety inspections If you lack these qualifications do not attempt the installation yourself instead use a professional structural rigger When rigging the unit always be secured with a secondary safety attachment The installation location of the fixture has got to be built in the way that it can hold 10 times the weight for 1 hour with out any harming Installation should be checked at least one time a year by a skilled person Cleaning and Maintenance Installation Maintenance The operator has to make sure that the unit is operating safely and has the installa tions and electronics checked by an expert every year The following points have to be considered during the inspection 1 All screws used for installing the device or part of the device have to be tightly connected and must not be corr2. If purchase date cannot be provided date of manufacture will be used to determine warranty period Goods returned under warranty must follow the proper authorization procedure and must be accompanied by a copy of the original invoice and Return Authorization Number given by MSI Goods repaired under warranty will be returned to the owner with the freight prepaid by MSI via the most economical means of shipment Repair or replacement as provided for under this warranty is the exclusive remedy of the consumer MEGA SYSTEMS INC makes no warranties express or implied with respect to any product and Mega Systems specifically disclaims any warranty of merchantability or fitness for a particular purpose Mega Systems shall not be liable for any indirect inci dental or consequential damage including lost profit sustained or incurred in connection with any product or caused by product defect or the partial or total failure of any product regardless of the form of action weather in contract tort including negligence strict liability or otherwise and weather or not such damage was foreseen or unforeseen Warranty is void if the product is misused damaged modified in any way or for unauthorized repairs or parts This warranty gives you specific legal rights and you may also have other rights which vary from state to state Mega Lite 5718 Kenwick St San Antonio TX 78238 Ph 210 684 2600 Fax 210 855 6279 www mega lite com info mega l
3. Single Mounting Yoke Base Plate Dual Quick Re lease mount included Display Digital 11 5 Power connection Neutrik True power in amp out connection Size 19 x 11 5 x 4 5 Size 24 25 x 14 x 6 Weight 23lb Weight 25lb 4 5 Electrical Specifications 6 25 w floor base LED Quantity 24 Penta LED Red Green Blue White Amber LED Watts 12W LED Lifetime 40 to 80 thousand hours average LED Angle 26 Refresh Rate 1200 Hz Power Input Voltage 110V 240 50 60 Hz Ballast Electronic auto switching Power Consumption Watts 175 Amps 1 45 Control amp Programming DMX 512 Protocol DMX Modes Mode 3 Channels R G B Mode 5 Channels R G B W A Mode 8 Channels Dimmer R G B W A Strobe Macro Control Options Display preset setting Main Power Connection Caution Do not connect fixture to a dimmer system This unit has Auto switching power supply It will respond to 110V or 220V automatically This unit must be earthed electronically grounded Replace fuse only with the specified type and rating The occupation of the connection cable is as follows This fixture is equipped with an electronic power supply that will let the unit operate from 100V to 240V from 50Hz to 60Hz Lee DMX 512 Connection The fixture is equipped with 3 pin XLR Sockets for DMX input and output The sockets are wired in parallel Only use a shielded twisted pair cable designed for RS 485 and 3 pi
4. MEGAG IDOL LI T E P24 USER MANUAL Table of Contents safety TOMI TN I OM instado aida SC lA uucwaratwescse A A Main Power Connect eee eeeeeaeeeeeaneeeeaeeeeaeteennetennneesnnnery DMX 512 COMEN pee nese ee eee eee ee ere a ee Mali CONTMO Men lose DMX dO rs RIOJN Ne FIXUS ta arica Cleaning amp MA INTENANCC esca eric Parts a nr Check that the unit has not been damaged during transport Read all cautions and warnings prior to operation of this equipment Protection Against Fire Fire Maintain a minimum of 1 foot distance from any type of flame Replace fuse only with the specified type and rating Do Not install the unit to close to a heat source Make sure cable are properly secured Maximum surface operating temperature 140 D o E goa Protection Against Fire 1 Disconnect power before servicing 2 For connection to main power supply proceed to page 5 3 This unit must be earthed electronically grounded Electrical Protection Against Mechanical Hazards 1 Use safety chain when hanging unit ak 2 Use quality clamps or bolts when positioning unit 3 Do not open unit while it is on risk of electrical shock Mechanical Technical Information Part Numbers 4260 Idol Lite P24 Mechanical Specifications DMX Connectors Neutrik 3 pin XLR NC3FX HD IP 65 connectors in A and out Thermal Maximum ambient temperature 104 Maximum surface temperature 140 Fastening System
5. ite com
6. n XLR plugs and connectors in order to connect the controller with the fixture or the fixture with another DMX input DMX output 1 Shield anes 2 Signal 3 Signal Caution At the last fixture the DMX signal needs to be terminated with a terminator Solder a 120 Ohm re sistor between the and the signal into a 3 pin XLR plug and plug it in to the last fixture on the signal run Pre manufactured terminator plugs are available for purchase from your Mega Lite dealer P DMX T Display Menu The control board on the fixture base is your interface to access and control all the functions on the unit lts digital display gives you a code view of the options and functions The following will explain each func tion and its options 009090 Menu Enter Up Down To Set the DMX Start Channel press the A then press Enter Use the A or Y to select the desired DMX Start Channel and press Enter to confirm your setting y DMX 512 This mode will allow you to operate the fixture with a DMX con ork Mod Master This Function Allows you to run the Auto Programs Or Audio Pro grams and send DMX signal out to the Slave units Slave On Slave Mode the fixture will copy the functions on the Master unit To Set the Desired operational mode press Enter Use the A or Y to select the desired mode and press Enter to confirm your setting To set the desired operational channel mode press Enter Use the A or Y to select the de
7. oded 2 There must not be any deformations on the housing fixation and installation spots ceiling suspension trussing 3 The electronic power supply cables must not show any damages material fatigue e g porous cables or sediments Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed Note There is no serviceable parts inside the device except for the LED s Maintenance and service operations are to be carried out by authorized dealers Replacing the fuse Only replace the fuse with the same type and rating Replacing the power cable If the power cable of this device becomes damaged it has to be replaced by author ized dealers or trained professional only Should you have further questions please contact your dealer Parts List Accessory 4260 LED Replacement LED 4260 FB Removable Floor Base 4260 MPCB Main PCB card 4260 PS Power Supply 4260 DIS Display 4260 QR Quick Release Mount 2 included 4260 FG Frontal Glass 4260 KN Knob Set NEU NAC3PX Panel Mount Power Connector Warranty Information Warranty Conditions Unless otherwise stated in writing your product is covered by a one year parts and labor limited warranty LEDs are not guaranteed to match in color temperature or output It is the owner s responsibility to furnish receipts or invoices for verification of purchase date and reseller or distributor
8. om 0 that will not have a dimming time to 3 that will have the longest dimming time press Enter to con firm your setting This function will give you access to the Display Control press Enter Use the A or Y to select the desired display operational Mode from Display On that will leave the display always turned on Or Display Auto that will make the display turn off after no usage for 1 60 seconds press Enter to confirm your setting This function will give you information of how long the fixture has been turned on This function gives you information of the fixtures current temperature This function will give you access to lock the menu keys so they are not accident ly moved Press Enter Use the A or Y to select the desired Key settings from Lock Or Unlock press Enter to confirm your setting You will have to hold the Enter button for 3 seconds to unlock the keys Value lf DMX signal is lost The Fixture will hold the last DMX value Hold sent Value If DMX signal is lost The fixture will bring dimmer channels to Clear zero Idol LiteP24 DMX Profile Idol Lite P24 3 Channel Mode DMX Chanel LED Color Red LED intensity 0 255 AO LED Color Green LED Intensit 0 255 E ee LED Color Blue LED Intensit 0 255 Idol Lite P24 5 Channel Mode A a er a Idol Lite P24 8 Channel Mode EE E AE E a E e Strobe ote Glow to fast __ slow to fast 0 127 ne lt A Random Strobe slow to fast slow to fast 128 255
9. sired DMX profile operational mode from 3 5 or 8 and press Enter to confirm your setting Note Operational mode are located on Page of the manual This function will give you access to the LED Dimming curves Press Enter Use the A or Y to select the LED dimming operational curve from O that will not have a dimming time to 3 that will have the longest dimming time press Enter to con firm your setting This function will give you access to the Preprogramed Chases Press Enter Use the A or Y to select the programed chase press Enter to confirm your set ting Use the A or Y to select the desired speed of the Chase from 1 to 15 press Enter to confirm your setting Display Mode DMX Status This function will give you access to the LED Dimming curves Press Enter Use the A or Y to select the LED dimming operational curve from 0 that will not have a dimming time to 3 that will have the longest dimming time press Enter to con firm your setting This function will give you access to set a color via display Press Enter Use the A or Y to select the desired color Press Enter use the A or Y to select inten sity from O to 255 You can repeat this process to get any color combination Note once color is set you can power up and the last color set will automatically come on White 000 Amber OOO This function will give you access to the LED Dimming curves Press Enter Use the A or Y to select the LED dimming operational curve fr
Download Pdf Manuals
Related Search