Aluminium Multi-Purpose Ladder Model: TTMLPS
Contents
1. Aluminium Multi Purpose Ladder Model TTMLPS User Manual Please read and retain for future reference IMPORTANT Read all instructions before use Contents Safety precautions Specifications Contents Assembly Safety IMPORTANT SAFETY INSTRUCTIONS WARNING to avoid serious injury or death please read all instructions and observe all warning labels on this product DANGER METAL CONDUCTS ELECTRICITY DO NOT let this ladder or any part of it come in contact with live wires Maximum weight capacity for this ladder is 150kg This includes weight of user tools and materials Always ensure all locking mechanisms are in locked position before stepping on the ladder Stabilizer bars must be properly and securely fitted before use Do not use any components not recommended by the manufacturer Inspect thoroughly before each use Never use in windy rainy or icy conditions Always handle with a firm grip Use only on flat stable surface Never place anything under stabilizer bars to try to increase height Never use if under the influence of drugs or alcohol Never set up ladder in front of doors that are unlocked Do not use ladder jacks with this ladder Never attempt to move ladder while on it DO NOT stand on the ladder while releasing the locking mechanisms Never use ladder if it is not on a level surface As a straight ladder never stand on or above third rung from the top As a step ladder never stan2. that it conforms to CE directives EN131 1 2007 Al 2011 EN131 2 2010 Al 2012 EN131 3 2007 EN131 4 2007 Mr Alan Garnett UK QA Manager Environmental Protection RECYCLING WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH HOUSEHOLD WASTE PLEASE RECYCLE WHERE FACILITIES EXIST CHECK WITH YOUR LOCAL AUTHORITY OR RETAILER FOR RECYCLING ADVICE x 12 Months Limited Warranty If within 12 months from the date of purchase you experience any problems with your product please return the product to its distributor dealer for repair or replacement This warranty DOES NOT COVER normal wear or any damage as a result of accidents misuse abuse or negligence
3. The hinges may appear to audibly click into position but always visually check that the locking indicator shows the hinge to be fully locked LADDER POSITIONS DO NOT attempt to use the ladder constructed in a position other than those illustrated here STORAGE POSITION STEPLADDER NEVER stand in between the front and back sections a straddling i Never stand on or above the second rung from the top STRAIGHT LADDER POSITIONS NEVER stand on the top three rungs The ladder should be set at an angle of approximately 75 degrees Take extra care when using the shorter positions as the stabiliser bar is not in contact with the wall STAND OFF LADDER Ideal for reaching over flower beds painting windows clearing gutters etc Ensure that the rubber feet at the top are firmly and evenly pressed against the wall The position is NOT suitable for use with the scaffolding plates SCAFFOLD POSITIONS Scaffolding Plates Scaffolding Plates Scaffolding Plates Scaffolding Plates ae ene ji SEE NOTES ON SCAFFOLD PLATES DO NOT use the ladder in these positions without the scaffold plates in place IN POSITION ABOVE REMOVE TOP STABILISER BAR SAFETY Declaration of Conformity We ACL Group Intl Ltd England DN6 8LZ declare that the Terratek Multi Purpose Ladder has been manufactured according to our full quality assurance procedures The declaration is to certify
4. d on above the second rung from the top Always wear good nonslip footwear Do not wear loose clothing Do not use if ladder is wet It is always advisable to have someone hold the bottom of ladder for added security Specifications Max load 150 KG Open Size Straight 365cm Step Ladder 178cm Highest Standing Level Straight 242cm Step ladder 141cm Scaffold 95cm Rung Spacing 25cm Contents Ladder Stabilizer bars BEFORE USE Attach stabilizer bars Remove transit protectors at each end of the ladder Place the stabilizer bars into the ends of the side rails at each end of the ladder and secure with the nuts bolts and washers provided see diagram below DO NOT use the ladder without the stabilizer bars attached unless otherwise noted Always check the stabilizer bars are secure before putting any weight on the ladder Only use stabilizer bars supplied Hinge Locking Mechanisms ALWAYS make sure that all the ladder hinges are in the locked position before using Each pair of locks must be locked simultaneously PROCESS Pull out the unlocking levers to release a pair of hinges so that the locking pin is in the O position NOT LOCKED Fold the relevant sections of the ladder to form the position that you require The hinges will automatically snap in place at certain angles and the locking pin is in the L position LOCKED L LOCKED O NOT LOCKED CAUTION
Download Pdf Manuals
Related Search