Homologation Directive for Tracking System for Two
Contents
1. Homologation Directive for Tracking System for Two Wheeled vehicles VERSION 1 0 def 1 October 2012 Tracking system requirements and testing methods TWO1 Published by the Vehicle Crime Insurance Bureau VbV Effective date 1 November 2012 CONTENTS 1 ADMINISTRATIVE PROVISIONS ee ae cetera motes decid 2 TECHNICAL DEFINITIONS dO 3 CLASSIFICA TION SYSTEM ses aeeai rrarena dereira tdak iaai dera ikat 4 TWO WHEELED TRACKING SYSTEM 5 DESCRIPTION OF THE TESTS hada ade le VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def 1 ADMINISTRATIVE PROVISIONS The administrative provisions applying to this inspection specification are as described in VbV Administrative Provisions 04 version 1 1 1 1 Items required for a product inspection Before a product inspection can be considered the testing institute must be provided with the following documents through the Certification Body Where applicable to the product this means 1 1 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 10 A completed and signed application form for the performance of the tests Documentation showing all the capabilities of the product Installation instructions written in Dutch complete with o projecting of the system parts2. and physical and logical functions must be available System as described in 3 1 of this Directive Vehicle the mobile object to which this Directive applies more specifically the vehicle characterised as a motorcycle 25 km h moped 45 km h moped quad bike microcar and scoot mobile Original Equiped OE a system that has been installed in the factory or factory environment Aftermarket a system or part of a system that has been installed after the vehicle has been delivered Detection technical method for detecting a pre defined alarm condition VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def 3 CLASSIFICATION SYSTEM 3 1 System for two wheeled vehicles Consists of an onboard unit OBU and any aerials required The latter may be placed inside the OBU or be external a system capable of automatically determining the position of the vehicle and forwarding it to the receiving environment the system must be capable of performing all the functions and have all the properties listed in Section 4 of this specification 4 TWO WHEELED TRACKING SYSTEM REQUIREMENTS Tracking systems in vehicles do not interfere with the vehicle technology using only the power supply and the horn which means that the technical requirements of the OBU are limited Tracking systems for tvehicles must meet a number of functional requirements there being no description of HOW the function is to be carrie
3. o electrical and wiring diagrams o tests with checklist o alist of the approved system parts User manual written in Dutch complete with o operating conditions operating instructions the prevention of unnecessary signalling what to do in the event of failure faults a list of the system parts relevant to the user Full technical product documentation being o printed circuit board layouts of all the components electrical circuit diagrams of all the components mechanical drawings of all the components assembly drawing of all the components Two complete products to be supplied as in production The use of prototypes is not permitted Statements for the following items o the tests relevant to this inspection specification that have been carried out on an identical product These statements must be accompanied by the full test reports showing that the statements given are based on fact Certificates of bodies showing that tests relevant to this inspection specification have been carried out A description of the composition of the system In the case of ex works systems the system parts of the vehicle involved in the operation of the system must be indicated Submission of the documentation such as drawings and commercial documentation on an electronic data carrier is permitted The Certification Body shall have access to the documents described above at the testing institute at any time and shall o
4. the tests have taken place is maintained in assembly 5 1 5 System parts will be tested in accordance with the test descriptions 5 1 6 For the duration of each test no unnecessary alarms may be caused and the system not change status other than in the usual or intended manner 5 1 7 At the end of each test the system parts must perform according to the manufacturer s specifications and may not have undergone any deformations and or changes that may impair the operation of the system parts at that time or after a period of time 5 1 8 installation must always be concluded with a full system test which may be automated and must be logged 5 2 Test descriptions Cold test Temperature T 40 C 2 C Voltage U 9 V 02 V Acclimatisation time t 4 hours EU 95 56 5 2 2 1 Heat test Temperature 85 C 2 C Voltage U 15 V 40 2 V Acclimatisation time t 4 hours EU 95 56 5 2 2 2 HF external radiation EMC High frequency external radiation tests according to 97 24 EC with latest amendment 2009 108 EC Watertightness The system must be spray watertight IPX5 All the above tests may be carried out by a testing establishment recognised and accredited by the Certification Body If other test results are available their acceptance shall be at the discretion of the Certification Body All the tests must be preceded by a functional test After the performance of the above tests the system must contin
5. amming condition immediately a control period of at least 30 seconds being required If the jamming condition has not been discontinued after this control period the system must operate the vehicle s horn This detection is independent of the status of the ignition ignition on off The system must operate the horn not later than 90 seconds after the first jamming detection has taken place The horn must be operated at a frequency of 1 3 Hz but also be a continuous signal The length of this cycle may be 25 30 seconds with an interval of 0 15 seconds After one jamming detection this cycle may be generated maximum of three times When the system after a jamming detection has logged back onto the network an alarm signal must be generated within 180 seconds This alarm signal must be logged in the receiving environment The SOC Particuliere Alarm Centrale must be capable of retrieving a current position of the vehicle at any time after a verified theft signal This applies in the ignition on condition or in the alarm condition Alarm transmission over IP is permitted 2G and 3G VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def 4 4 Function environment and processes 4 4 1 If the receiving environment is physically located a SOC the SOC standards automatically apply If the receiving environment is NOT located in a SOC the supplier provider must show 4 4 2 that the data
6. centre where the receiving environment is located meets the requirements listed below declaration is permitted a the receiving environment must be of fully redundant construction b the receiving environment must have an automatic emergency power supply at its disposal c the receiving environment must be set up according to an authorisation system for access to automated customer data This system must show that staff are authorised separately to gain access to customer data This system must also show how the access to this data proceeds by way of an adequate access threshold This may be achieved by means of a password for example The receiving environment must also be protected from physical and logical access from outside by means of the usual security techniques such as a firewall for logical access control d to prevent data loss the receiving environment must be equipped with a daily backup of all the modified electronic data A RAID 1 construction is permitted for this purpose 4 4 3 that continuity for this is provided by means of an agreement concluded with the supplier provider 4 4 4 which SOC provides the service and that continuity for this is provided by means of an agreement THE PROCESS DIAGRAMS RELATING TO ORGANISATION AND COURSE OF PROCESSES ARE INCLUDED IN THE APPENDICES 4 5 Installation requirements The Installation Directive for Two Wheeled Vehicles list the inspection points that the installa
7. d out It is a matter of achieving the desired result 41 General 4 1 1 requirements laid down in this specification apply to systems used for installation in category L vehicles of Homologation Directive ECE TRANS WP 29 78 Rev 2 and fitted with a 6 12 Volt battery 4 1 2 Parts of these vehicles that indirectly or directly form part of the system are regarded as a system part and must also be submitted for inspection Parts that have previously been included in the vehicle type approval do not require additional inspection 41 3 If the system or a system part has been integrated with equipment intended for other purposes this equipment must meet the inspection requirements to the extent that it has an impact on the operation of the system 4 1 4 lf requirements exist under Dutch or European legislation for the system or a system part they must also comply with or be homologated in accordance with these requirements 4 1 5 system must be designed and installed such that every vehicle equipped with it continues to comply with the technical specifications type approval 4 1 6 system may not in any way put road safety at risk in an activated or non activated condition VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def 4 2 4 2 1 4 2 2 4 2 3 4 2 4 4 2 5 4 2 6 4 2 7 4 2 8 4 2 9 4 3 4 3 1 4 3 2 4 3 3 4 3 4 4 3 5 4 3 6 4 3 7 Design r
8. equirements The casing must be sprayproof and meet the requirements of IPX 5 waterproof specifications The use of an external relay to effect the operation of the vehicle s horn is permitted All the system parts must meet the homologation requirements and only be supplied complete The type designations and or brand name under which the approval has been given must be clearly stated on the most important part s not visible from outside while parts visible from outside Such as sensors may be provided with a recognisable marking A production code must be affixed to the printed circuit board or to the casing of the OBU It may also be given in the software The system must be supplied with a user manual and specific installation instructions for the product which must be accompanied by VbV Installation Directive for two wheeled vehicles They may be provided by digital means The must be designed so that it can meet the VbV Installation Directive For the latest version of the Installation Directive for two wheeled vehicles see the VbV website The system s energy supply must be provided by the vehicle s start battery The system must be provided with cabling that makes it possible to install the system properly in the vehicle National coverage in the Netherlands and roaming facilities must be available on the GSM connections used with the provider s declaration is permitted Performance requireme
9. f course treat the information as confidential VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def 2 TECHNICAL DEFINITIONS 21 Technical definitions Alarm condition the condition of the system when sabotage jamming or moving detection has occurred Automatic alarm signal a signal generated by an alarm system as a result of an alarm and forwarded to a receiving environment by electronic means Jamming the electronic disruption of GSM and or GPS signals aimed at making an automatic alarm signal impossible In a jamming condition it is sometimes still possible to transmit an alarm signal The onboard action does not depend on this and must always take place OBU OnBoard Unit the actual system Receiving environment the infrastructure in which automatic alarm signals are received and processed SOC Secure Operating Centre definition as set out in the Dutch Private Security Organisations and Detective Agencies Act Wet op de Particuliere Beveiligingsorganisaties en Recherchebureaus an organisation set up and equipped for the professional receipt and processing of alarm signals on behalf of third parties Standby condition is described here as an OBU at rest GSM and or GPS modules may be switched off ignition OFF physical and logical input monitoring active On detecting an active physical and or logical input the system must switch on automatically GSM and or GPS modules
10. nts Components and functionalities connected to or used on the system and not described in this Directive do not form part of the approval of the product The system must transmit an automatic test signal at least once every seven days The absence of the test signal must be detected by the receiving environment and be processed in accordance with the protocol laid down see Appendix 2 The receipt of the test signal must be logged in the receiving environment The test signal in any event includes OBU identity date and time and the log period covers at least four weeks first in first out Disabling the system for maintenance for example is only possible if authorised When applying for Homologation the supplier provider must show that it is registered with the Dutch Data Protection Authority College Bescherming Persoonsgegevens This can be demonstrated by submitting the required registration certificate Only the horn present on the vehicle may be used for the acoustic signalling The power consumption in the standby condition must be limited to not more than 2 mA The system must have such an emergency power supply that it makes detection and reporting possible independently and separately from the power supply VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def 4 3 8 4 3 9 4 3 10 4 3 11 4 3 12 4 3 13 4 3 14 4 3 15 4 3 16 4 3 17 The system s emergency power su
11. pply must have sufficient capacity to allow the system to operate for a minimum of five days stand alone and in standby condition Note this functionality will be reconsidered after a maximum of one year and adjusted if so desired The system must finally generate a signal before the actual voltage of the emergency power supply has fallen below the value at which the system can no longer operate This value or these values must be indicated by the supplier where A upper value B lower value C signal value This signal must be logged in the receiving environment and be reported to the owner of the vehicle The system must immediately detect and report power supply failure This signal occurs independently of the ignition on off condition it must be generated within 180 seconds of detection and be processed in accordance with the protocol laid down Appendices 1 and 2 As soon as the vehicle is lifted otherwise wrongfully moved an automatic alarm signal must be generated on the basis of the following the vehicle is moving at a speed of gt 30 km h with ignition off or the OBU detects an alarm condition moving with ignition off that continues after 60 seconds or the vehicle is moving over a cumulative distance of gt 300 metres with ignition off When the ignition of the vehicle is switched off the position known at that time must be reported to the receiving environment and be stored The system must detect a j
12. tion of a tracking system for vehicles must meet 4 5 1 Each supplier must supply this Directive with the installation instructions of its system These may be supplied by digital means VbV and Kiwa SCM have published the latest applicable version of the Installation Directive for two Wheeled Vehicles on their websites 4 6 Certification 4 6 1 way of derogation from the VbV regulation Recognition of Installation Companies for Security Systems in on Vehicles and Operating Equipment Erkenning Inbouwbedrijven beveiligingssystemen in op Voertuigen en Werkmaterieel of 24 April 2006 see Annex 1 Additional Conditions for Two Wheeled Vehicles of 1 August 2012 VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def 5 DESCRIPTION OF THE TESTS 5 1 General 5 1 1 The tests to be carried out will be determined by the Test House and the test results of other Test Houses may be used The Test House will determine which test results can actually be used 5 1 2 order of the tests to be carried out will be determined by the Test House 5 1 3 The system parts will be tested in the form in which they are installed and supplied 5 1 4 The positioning of the system parts during the tests to be carried out will be determined by the iTest House and if possible according to installation instructions In the event a manufacturer has special requirements it must be shown that the position in which
13. ue to meet the functional requirements of this regulation VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def Appendix 1 Automatic Alarm Signal Alarm process Two1 Movement Automate Movement Sabotage alarm signal alarm signal Sabotage existing VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def Appendix 2 TW01 Automatic Test Signal Process Movement amp jamming alarm process 01 Ignition OFF Hom operation ON HORN operation OFF VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def Appendix 3 Movement and Jamming Alarm VbV Homologation Directive Tracking System Two Wheeled vehicles TW01 version 1 0 def
Download Pdf Manuals
Related Search