For use with Network Camera VB-M600D/VB
Contents
1. 7 Assemble screws M3 3 8 Ceiling bracket screws M4 3 4 Backside ceiling bracket 2 5 Template 1 9 Installation Guide This document 1 CANON INC 2011 Printed in Taiwan Symbols Indicating Safety Precautions This Installation Guide uses the following marks to indicate important information the user should know in order to use the product safely Be sure to observe these items Inappropriate handling against the instruction accompanied by this sign may A Warning result in death or serious injury Be sure to observe these warnings to ensure safety A Caution Inappropriate handling against the instruction accompanied by this sign may result in injury Be sure to observe these precautions to ensure safety Caution Inappropriate handling against the instruction accompanied by this sign may result in property damage Be sure to observe these precautions This symbol indicates important or restricted items Be sure to read this section Important Safety Precautions This section explains precautions that must be observed when using the camera If they are not observed injury death and or property damage may occur Read the following information carefully and be sure to observe the precautions Installation Precautions Warning Do not install in the following places e Places in strong direct sunlight near heat generating objects or subject to high temperatures e Places near fire sou2. Attach the inner cover to its original position Attach the dome case Firmly fix the dome case at three points to the camera using the dome case screws 15 Attach the recessed mounting cover Align the O mark on the recessed mounting cover with the I mark on the ceiling bracket and turn clockwise until the 1 mark on the recessed mounting cover aligns with the 1 mark on the ceiling bracket Fix the recessed mounting cover Set the camera angle When installation is complete use the Camera Angle Setting Tool to adjust the pan tilt rotation zoom and focus See Camera Angle Setting Tool in the VB M700F VB M600D VB M600VE Operation Guide
3. locating pins of ceiling bracket 1 with the locating bores in ceiling bracket 2 Fix the brackets with the 3 bundled assemble screws M3 The position of the locating bores on ceiling bracket 2 differs according to the camera Refer to the diagram to interlock the brackets correctly Important Check that the interlocked brackets are fixed by the embossed locating pins 3 Loosen the three lock screws on the dome case and remove the dome case VB M600VE Special tamper resistant screws are used for the dome case lock screws Use the dome case lock screw wrench bundled with the camera 4 Remove the inner cover Remove the 4 pieces of tape that prevent lens rotation during shipping and push the inner cover in the direction of the arrows to remove it Then remove the 2 pieces of tape attached to the base of the lens 5 Open the wiring hole according to the installation method Use a box cutter to cut a cross shape into the wiring hole cover in order to guide cables through Do not remove the wiring hole cover VB M600VE Use a coin to unscrew the wiring hole cover from the side through which cables will be guided Screw the wiring hole cover into the other wiring hole You can fit a composite pipe NPT 3 4 inch threaded hole to the wiring hole 6 Mount the camera to the ceiling bracket assembly Fix with three bundled camera fixing screws M4 The screw holes differ according to the camera Refer to the diagram
4. YT1 1605 000 Canon IEA For use with Network Camera VB M600D VB M600VE Recessed Mounting Kit SR600 VB Installation Guide The recessed mounting kit SR600 VB is an optional product for exclusive use with VB M600D VB M6O00VE hereafter referred to as the camera The camera is recessed into a ceiling or wall for a clean appearance This Installation Guide explains the installation procedure using the recessed mounting kit SR600 VB Be sure to read the Safety Precautions section for correct use After reading this Installation Guide keep it in a readily accessible location for future reference In addition to this Installation Guide also read the camera bundled VB M600D VB M600VE Installation Guide and VB M700F VB M600D VB M6O00VE Operation Guide included in the Setup CD ROM For the latest information firmware and bundled software User s Manuals operating environment etc please check our website Caution Request a professional installer for all camera installation work Never try to install the camera by yourself Doing so may result in unforeseen accidents such as dropping the camera or electric shock Check Bundled Items This product comes with the following items If any item is missing contact the dealer where you purchased the product I 2 Ceiling bracket 1 1 1 Recessed mounting cover 1 3 Ceiling bracket 2 1 e 6 Camera fixing screws M4 3 f
5. icant vibration VB M600VE Malfunction may result e Take care not to damage wiring or pipes in the room Damage to peripheral items may result Precautions for Mounting the Camera Underneath Eaves VB M600VE For installation of VB M600VE underneath eaves proceed carefully to retain waterproof dustproof capabilities Be sure to read Precautions for Mounting the Camera Underneath Eaves in the VB M600D VB M600VE Installation Guide Precautions for Use ZN Warning e If you discover defective conditions such as smoke strange sounds heat or strange odors immediately stop using the camera and contact your closest dealer Continued use may cause fire or electric shock e Do not disassemble or modify the camera e Do not damage the connecting cable and others e Do not spill water or other liquid inside the camera spray the camera with water or otherwise make it wet e Do not insert foreign objects into the camera e Do not use flammable sprays near the camera e Do not leave LAN cables external power supplies or AC adapter optional power connectors connected when the camera is not in use for long periods e Do not use flammable solvents such as alcohol paint thinner or benzine when cleaning the camera Fire or electric shock may result Notes on Power Supply Warning e Only use the dedicated AC adapter PA V17 optional for AC power e Do not set any heavy objects on the po
6. locating pins ae When guiding cables through the side ae When guiding cables through the ceiling wiring hole Diagram of VB M600D Bundled Diagram of VB M600D VB M600VE j Bunaea screw M4 x 3 Dome VB M600VE case Secure to an anchor or structure Dome Main unit Ceiling board Diagram of VB M600D Diagram of VB M600D Diagram of VB M600D Installing the Camera The following explains the procedures to install the camera on a ceiling using the recessed mounting kit Before installing the camera set the IP address and other network information on the camera using the VB Initial Setting Tool on the Setup CD ROM For details on how to operate the VB Initial Setting Tool see VB M700F VB M600D VB M600VE Operation Guide If using an SD memory card insert the SD memory card into the camera before attaching the dome case see Using an SD Memory Card in VB M600D VB M600VE Installation Guide 1 Determine an installation position for the camera and drill holes in the ceiling Use the bundled template to determine the positions of the holes three for mounting the backside ceiling bracket and the ceiling bracket holes according to the camera orientation Next drill holes in the ceiling 2 Assemble the ceiling brackets Interlock the embossed
7. rces or flammable solvents alcohol thinner etc e Humid or dusty places e Places subject to lamp black or steam e Places subject to sea air e Confined or enclosed places Fire or electric shock may result Caution For installation or inspection of this camera consult the dealer where you purchased the product e This installation should be made by a qualified service person and should conform to all local codes e When installing on a ceiling make sure the surface is capable of withstanding the total weight of the recessed mounting kit and the camera and is sufficiently reinforced if necessary e Periodically check the ceiling brackets and screws for rust and loose material to prevent injuries and equipment damage due to falling items e Do not install in unstable places places subject to significant vibration or impact or places subject to salt damage or corrosive gas e Be sure to attach the camera bundled safety wire to the camera during installation e Use exclusively with the camera Failure to do so may result in the camera falling or other accidents e Do not touch the edge of metal parts with bare hands e Do not insert your finger in the space between the brackets and the ceiling Injury may result Caution e Do not install the camera on an unstable surface e To maximize shock resistant specifications do not install on insufficiently strong surfaces or surfaces subject to signif
8. to fix the camera using the correct screw holes Attach the backside ceiling brackets inside the ceiling From the inside of the ceiling insert the protrusions on the backside ceiling brackets through the mounting holes drilled in step 1 Temporarily tighten screws to the backside ceiling brackets Temporarily tighten the three bundled ceiling bracket screws M4 through the ceiling 9 Secure the safety wire Securely attach the camera bundled safety wire to an anchor or structure After securing one end of the safety wire to the ceiling secure the other end to the camera using the screw that is fastened to the camera Guide the LAN cable through the wiring hole When using an external power supply guide the power interface cable through the wiring hole Guide the I O interface cable and the audio interface cable bundled with the camera through the wiring hole if necessary Cable tie Important J When using the AC adapter PA V17 optional cut the cable tie and remove the ferrite core Be sure not to damage the power cable when cutting the cable tie 11 Fix the camera mounted ceiling bracket assembly to the ceiling Position the ceiling bracket assembly onto the screws temporarily tightened in step 8 turn clockwise and completely fasten the screws 12 wire the cables Wire the cables referring to the Cable Wiring Method in the VB M600D VB M600VE Installation Guide 13 Attach the inner cover
9. wer cable e Do not pull forcibly bend scratch or modify the power cable e Do not cover or wrap the AC adapter optional with cloth or blankets Fire or electric shock may result Be sure to read the User s Manual for the PA V17 optional before use Caution e After turning off the power wait for at least five seconds before turning the power on again If the power is turned on again too quickly the camera may operate poorly External Dimensions Recessed mounting cover Ceiling bracket Backside ceiling brackets 3 65 TR 60 E 0 20 ZEEE W Circumscribed z circle diameter Attached to VB M600D Attached to VB M600VE 152 5 98 123 4 84 123 484 Unit mm in Main Specifications Model SR600 VB Type Silver Network camera mounting VB M600D Temperature 10 50 C 14 122 F Humidity 5 85 without condensation environments Temperature 10 50 C 14 122 F Humidity 5 85 without condensation Temperature 30 50 C 22 122 F Humidity 5 85 without condensation equipped with an optional Heater Unit HU600 VB Dimensions VB M600D 0 x H 247 x 83 mm 0 9 72 x 3 27 in x H 247 x 90 mm O 9 72 x 3 54 in Weight Approx 687 g 1 52 Ib excluding camera Bundled screw M3 x3 3 VB M600D Kag Lock screw m C lt S G ie Dome case VB M600VE Embossed
Download Pdf Manuals
Related Search