SEE Electrical Installation Manual
Contents
1. Programm Press Protection key number in Decimal The button changes into Protection key number in Hexadecimal The number on the right is your dongle number Type the dongle license code given in your contract in the Code field If you need to work with an older version too get in contact with your delivery department Click Program Your dongle is now programmed You will receive a message that the dongle is successfully programmed If you don t receive this message repeat the procedure If the programming of the dongle fails again contact us B 1 1 b LICENSE SEE ELECTRICAL SOFTWARE ON EACH COMPUTER REQUIRED If you start SEE Electrical for the first time the License wizard appears Enter your company data here Select the type of protection used for your software My software is protected with a hardware key After clicking on Finish you can use SEE Electrical unlimited within your license If the dongle is disconnected SEE electrical cannot work and is automatically closed During the installation a PROTECTION XML file is copied into the SEE Electrical folder lt xml version 1 0 encoding UTF 8 gt lt xml version 1 0 encoding UTF 8 gt lt PROTECTION_PARAMETERS VERSION 1 0 xmins xsi http www w3 org 2001 XMLSchema instance gt lt TYPE MERGE_LICENSE NO HARDWARE YES SERVER_SEARCH NO gt lt SERVER_INFO SERVER_NAMEs gt lt TYPE gt lt PROTECTION_PARAMETERS gt Edit the file with2. sever Nalies GEMAN B Licensing Types Page 17 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Notes about Windows XP Windows Server Vista und Windows 7 If the License Manager is installed onto a Windows XP Service Pack 2 system Windows Server Vista and Windows 7 the Port 475 will be automatically opened in the activated Windows Firewall To control the settings of the Windows Firewall click START gt Settings gt Control panel gt Windows Firewall or START gt Control Panel gt Windows Firewall If the Control Panel is displayed by Categories click the System and Security category to access the Windows Firewall command Then click the Allow a programm to communicate through Windows Firewall option Select the HASP LM entry The following window appears Add a Port Use these settings to open a port through Windows Firewall To find the port number and protocol consult the documentation for the program or service you want to use Name HASP LM Port number 475 OICP G UDP What are the risks of opening a port Insert the necessary values If you are using a firewall of a different manufacturer unlock the port 475 UDP for the Licence Manager Refer to the procedure in the documentation of your firewall Networks with different sub network addresses If the License manager is in another network segment than the computer where SEE Electrical
3. When running the Operating System as Administrator or as a User there are two possible approaches v The software must be installed with an administrator account If the user logs on as main user on the computer then it is enough to enter the values one more time and close the licence assistant The licence will remain on the computer However if the user logs on as User with limited rights the Administrator must give full access and modification rights for the whole SEE Electrical main directory v The user profile must keep the administrator rights during the installation The administrator rights can be removed again after the installation However if the user works with the User with limited rights property the administrator must give full access and modification rights for the whole SEE Electrical main directory A 3 INSTALLATION PROCESS Insert the CD of SEE Electrical that you have received from your local distributor or double click the installation file The Welcome window appears iz SEE Electrical V7 InstallShield Wizard Welcome to the InstallShield Wizard for SEE Electrical V7 The InstallShield R Wizard will install SEE Electrical V7 on your computer To continue click Next WARNING This program is protected by copyright law and international treaties Page 6 A Installation of SEE Electrical V7R1 electrical Click Next to proceed 3 SEE Electrical V7 InstallShield Wizard
4. 2012 IGE XAO All rights reserved Various data can appear in the dialog box Enter the serial number as given in your certificate Each serial number consists of 8 digits f you need to define Proxy settings refer to the chapter below Press the License on Internet button Make sure before that the Internet connection is available You will come to the internet site where you can generate your license code Licence my Software over the Internet Serial number 12345678 Password wens OK Cancel Enter the licence password as given to you in your certificate Upper and lower case is not considered Click the Licence button If the license request is correct the following message appears Response received Server status 321 Response received Response received Circuit diagrams EN Unlock code received Circuit diagrams IEEE Unlock code received Cabinets Unlock code received Installations Unlock code received Tree builder Unlock code received PDF Generator Unlock code received If you possess several serial numbers of SEE Electrical never licence one serial number while another serial number is licensed on this PC Otherwise you will lose one license If one license is already available you will receive a warning message Close the dialog box Click Finish in the License wizard and then click OR After clicking on Finish you can use SEE Electrical un
5. Exe v SEEProtection DIl v SEEProtection Bat v UnregisterService Bat The files are located in the iToolsiLocalServer folder of SEE Electrical after the installation After copying the files to the appropriate folder launch the SEEProtection bat file in order to register the SEEProtection dil file You need Administrator rights on the server If UAC User Account Control is disabled then you can just run SEEProtection bat If UAC is enabled then you have to run SEEProtection bat as Administrator To do this you have to start Command Prompt as Administrator Go to Start gt All Programs gt Accessories gt Command Prompt right click and select Run as Administrator In Command Prompt go to the folder where SEEProtection bat file is and run it from there Start the SEE Electrical Server Manager SEEServerManager exe The License Server Manager window appears Press the Settings button A new window appears Within this window you can see the Server IP Address and the Server ID Please send them to your SEE Electrical dealer in order for him to generate the licensing information about the server Click Cancel and close the License Server Manager After the dealer has sent you the license file lt Name LCS please copy this file to your server into the folder which contains the files for the local license server Open the License Server Manager again and then open the Settings window Press the i button in the Serve
6. a XML editor and make sure SERVER_SEARCH is NO in case a dongle but no network dongle is used Page 12 B Licensing Types electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved B 2 UNLOCKING WITH A NETWORK DONGLE GENERAL In this chapter you will find a description of unlocking the software with a network dongle If you are not familiar with the program we recommend after licensing with a dongle to work through the Workspace Example 1 in the User Manual to get a general introduction into the program When SEE Electrical is used together with a network dongle then the unlocking of the software on all computers has to be accomplished as described below However the dongle itself must be programmed only once The dongle software must be installed only once on the server B 2 1 INSTALLATION OF THE DONGLE SOFTWARE Install the dongle software on a computer which remains permanently in the network You need Administrator rights to run the procedure Proceed as follows Start the Aladdin License Manager Imsetup 8 32 EXE from the SEE Electrical CD folder HLDRV SERVER 8 32 The dongle must not be yet put to the computer To start the configuration you must first confirm the start window with Next ds HASP License Manager Installation Welcome This installation program will install the HASP License Manager on your system HASP License Manager version 8 32 For the installatio
7. ex In the following way NH_SERVER_ADDR 192 169 101 50 Guarantee before the change that the INI file is not write protected B 2 3 PROGRAMMING THE DONGLE The programming of the dongle has to be done on one of the computers where SEE Electrical is already installed You have to have administrator rights Plug in the dongle into the parallel and or USB interface of your PC After the installation of SEE Electrical a start menu is available in Windows under Programs gt IGE XAO gt SEE Electrical V7 gt Program dongle Click it The following dialog appears Protection Key Programming 1 1 x Programming key type HASP Select file Protection key number in Decimal 584617138 Code Programm B Licensing Types Page 19 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Press Protection key number in decimal The button changes in Protection key number in hexadecimal The number right to the button now indicates your dongle number Enter in the field Code the release code for the dongle as it is in your copy If you need to work with an older version too get in contact with your delivery department Select Program Your dongle is now programmed You will receive a message that the dongle is successfully programmed If you don t receive this message repeat the procedure If the programming of the dongle fails again contact us After successful programming plug the dongle in
8. installed on your system are newer than the drivers in the installation of the License Manager a message appears Driver Installation HASP SRM Run time Environment installation omitted Newer version already installed ErrorCode 29014750 Page 16 B Licensing Types electrical i Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved In the next window select Yes and press Finish ds HASP License Manager HASP License Manager has been successfully installed Do you want to start it now NOTE HASP key must be attached to the system in order to start the HASP License Manager Aladdin The installation is complete Copy the nhsrv ini from the folder IHLDRVIServeri820 on your CD into the folder System32 on the computer where the License Manager is running Remove the attribute Read only If you use a Windows 64 Bit System you must copy the nhsrv ini file from the IHLDRVIServeri832 of your CD into the directory Windows SysWOW64 directory Restart your computer Notes about Windows 32 bit computers The following possibility for controlling the installation is available only for Windows 32Bit For Windows 64 Bit the icon in the taskbar does not exist Control the complete installation of the Licence Manager by right clicking the A icon select Show In the HASP License Manager for Win32 window click the ActivityLoc menu item Search for the following ant
9. your License server Unlocking of SEE Electrical software it is necessary on each computer When SEE Electrical is run the first time the registration wizard is opened Enter your company data here Select the type of protection used for your software My software is protected with a hardware key After you click on Finish you can use SEE Electrical unrestricted within your license If the dongle is removed SEE Electrical cannot work and is automatically closed Notes for Licence Manager and SEE Electrical on the same system If the Licence Manager and SEE Electrical run on the same system you must carry out on this system the following additional configurations which are deviating from the standard approach On your computer open Windows START menu gt Settings gt Control panel gt Services and application gt Services Right click on the HASP License Manager service and select Properties in the pop up menu Click the Log on tab and activate the Allow service to interact with desktop option Confirm your modifications by OK Now follow the description in Installation of SEE Electrical per CAD computer in the network and enter in the NETHASP INI file for the IP address 127 0 0 1 The entry must be modified as follows NH_SERVER_ADDR 127 0 0 1 Restart the computer Page 20 B Licensing Types electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved B 2 4 ADDITIONAL CON
10. 5 Silent licensing if using the Remove the license when close the application option 31 5 3 6 Terminal Server SUD OO crrcrsreea naa E E E E A EERE 31 C INSTALLATION OF WORKSPACES SYMBOLS AND TEMPLATES IN A NETWORK IF NO SEE ELECTRICAL HAS BEEN INSTALLED BEFORE 144iiiinaioeniammmninimiammmmncmsnhn 32 D UPDATING FROM AN EXISTING SEE ELECTRICAL VERSION V5R_1 ccccessssesssssseeeeeees 33 E UPDATING FROM AN EXISTING SEE ELECTRICAL VERSION V4R1 AND OLDER 35 E 1 CONVERSION OF EXISTING USER DATA WHEN USING OLDER VERSIONS OF SEE ELECTRICAL 35 F INSTALLATION OF WORKSPACES SYMBOLS AND TEMPLATES IN A NETWORK IF OLDER VERSION OF SEE ELECTRICAL HAS BEEN INSTALLED BEFORE ccccccesssssssseeeeeeeeeseneeeesenees 36 G USING V7R1 AND V5R1 IN PARALLEL cc eessesesseees ERROR BOOKMARK NOT DEFINED G 1 CUSTOMERS WITH SOFTLOCK AND VERSION V5R1 n ERROR BOOKMARK NOT DEFINED H USING V4R1 AND V7R 1 imniiaommsammamunn sssiamnt 39 H 1 CUSTOMERS WITH SOFTLOCK AND VERSION V4R 1 ccccccccccccccceceeeeeeeeeeeceeeeeeceeseeeeeeeeseeeeeeseeseeeess 39 H 2 SIMULTANEOUS USE OF SEE ELECTRICAL V4R1 AND V7R1 ccccccccccccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeess 39 H21 SS OTMOCK ie ament ns EE doace aaa ie ere Soa EEE EA EEE igs 39 H22 Bongo ennes e Cee cer ene el Conta ib En ESC anti rere Tenet re errr ner rap renee errr eons 39 A Installation of SEE Electrical V7R1 Page 3 electrical Install
11. E ELECTRICAL WITH A DONGLE ccccccccccscececeeccecececccececcecccecccecccccccescecccceceeeceeceeeecs 11 B 1 1 License with a Dongle INtrOCUCTION 0 1 2 ccceeeceeettte eect ee eeecceeaeeeeeeeeeeeteceaaaaeeeeeeeeeeteeeesaaaeees 11 B 2 UNLOCKING WITH A NETWORK DONGLE GENERAL ccccccccecceecceeeeeeeeececeeeeeeeeeeeeeeeeeeeeseeeeeeeeseneess 13 B 2 1 Installation of the Dongle Software mimemensmsutsest emensnen oemsuctenes 13 B 2 2 Installation of SEE Electrical per CAD Computer in the NetWork eeee eeee 19 B 2 3 Programming the DONG Cac sea cee sa atc cedeactdavacescacte tennecnantcheaeahaecaccecacscaveeabceceeedeicansezesecesdecs 19 B 2 4 Additional Configuration when running Several or Different Licence Managers in the INGUWOTI ce cartes each Snes rada e tees aap aa ve poe sheet cas tea tee cose esta E E tate 21 B 3 LICENSE WITH A SOFTWARE KEY INTRODUCTION ccccccccccccccececcccecececccececececcceseeececeeeeeceeeeeseeeess 23 B 3 1 Different Network Cards Used during Softlock LICCNSING cccccccceesstttteeeeeeeeeeeenttaneees 23 B 3 2 License with a Software Key aocesiidociitt t diitueeei ta aconstmnnnensesnccen 24 B 3 3 Licensing SEE Electrical via Local License Server s442222222222eaaaaaaaemmmmnnen 28 B 3 4 Licensing automatically the new version if an old version of the software is already installed de E music A EEE E AET AA ET E E AEA EE E E es 31 B 3
12. FIGURATION WHEN RUNNING SEVERAL OR DIFFERENT LICENCE MANAGERS IN THE NETWORK If in your network you run several Licence Managers for different software products or if several Licence Managers are available in the network you must follow the following procedure Install on a CAD workstation the diagnostic program Diagnostix from the CD You will find the program in the CD folder under HLDRV HL_Diag aksdiag32 exe After the installation you will find it under Windows START gt Programs gt Aladdin gt DiagnostiX gt Aladdin Diagnostix Start the program The following window appears EF Aladdin DiagnostiX 1 10 E System info System Info Entity System Info Dongle Drivers and Services Servers in the Network gt Network Interfaces NetBIOS Interface Windows Sockets Ureversal Serial Bus USB Network Related Services and Versions Driver Update Display information about this computer In the Diagnostic Tools tree structure on the left side select the HASP entry B Licensing Types Page 21 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Click on the nethasp ini entry E Aladdin DiagnostiX 1 10 Gi System info nethasp ini Configuration mm HASP HL th li Hedock C Automated ini fle for IPAPX 5 MBAHASP peaa im lo mi rir M Nei Cystomized ini fle T Servers IP EE IM Servers IPX J Set output drec
13. License Agreement Please read the following license agreement carefully Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved USER RIGHTS CONCESSION AGREEMENT FOR SEE ELECTRICAL ISSUED BY IGE Note Please read carefully the terms of this agreement before continuing the installation as pressing the button ACCEPT will indicate your consent If you do not agree with these terms please abort the installation The software which accompanies this license the Software is a property of IGE and its licence holders and is protected by copyright IGE is the Software owner you have some user rights on the Software after agreeing with the license Unless in case of amendments by addendum accompanying this license your rights and obligations during the use of this Software are as I accept the terms in the license agreement I do not accept the terms in the license agreement InstallShield vr Read carefully the User rights Concession agreement Check the I accept the terms in the license agreement option and click Next if you want to proceed 4 SEE Electrical V7 InstallShield Wizard Customer Information Please enter your information User Name public Organization Install this application for Anyone who uses this computer all users Only for me public InstallShield TE Insert the user name and the organization A Installation of SEE Electrica
14. R eiectrica COPYRIGHT 2012 IGE XAO All rights reserved SEE Electrical Installation Manual electrical V7R1 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Copyright Copyright c May 2012 IGE XAO All rights reserved No material of this manual or any portion of it shall be reproduced transcribed saved or translated under whatever form and by whatever means without the written authorization from IGE XAO XAO 25 27 Victor Hugo bld Immeuble Pythagore 31773 COLOMIERS CEDEX FRANCE Page 2 A Installation of SEE Electrical V7R1 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved CONTENTS SEE ELECTRICAL INSTALLATION MANUAL cccccceessssessseeeeeeeeeseneseneneeeeseeeesseeesseneeeeeeeeeennenenanees 1 A INSTALLATION OF SEE ELECTRICAL VTR1 sissssccccssiessscctessticeissenscabesutiectexsnestixsetisabeneisesiessvesslsnes 5 A 1 HARWARE AND OPERATION SYSTEM enivenivansccsivtusctesvandeininensctesvebenieistusrbeivaionsniasnicbeinabendeiaibixieduaden 5 A t Minimal Gonfigurati N seriene aaae E EE ARERR 5 A 1 2 Recommended Configuration centenes eciont ennt enssrmetcisutenenyyms mton 5 Ad RIGHTS DURING INSTAMATION ieciitonimmamsstmsm mtsmssiamemsssssmaamosmassiiaseinsssmasmamyanma in 6 A 3 INSTALLATION PROCES Setena sentenciat enceten entertains 6 B LICENSING TYPES ciaci atmdsi atacat me tariaittesteton tenaest atm testa 11 B 1 LICENSE SE
15. abase of wire properties v Translation mdb translation database v Cables mdb user defined cable database v Ifyou have not created any user defined cable symbols we do not recommend you to save the Cables mab file All files with the endings tdw txt dat The cds LbL Lbp Lbv Lst Lsv Lsp files for the Lists and labels module SS From Templates you must by no means save the SYSTEM SEM file and the files with extension EXT and RPT because these files relate to the version If necessary remove the old version of SEE Electrical D Updating from an Existing SEE Electrical Version V5R1 Page 33 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved The installation must be made in a new directory you cannot install it over an existing version of SEE Electrical However you can install the new version parallel to the old one or uninstall the old version before installing the new one Before uninstalling check your backup Here is described the data transfer from the version V5R1 Note If you transfer data from an older version of SEE Electrical than V5R1 you must convert the files You will find instructions for converting the data under Conversion of data from V5R1 and older version Copy the saved data again into the proper directories If your data projects type database etc is processed for the first time with the new version of SEE Electrical you will
16. ation Manual COPYRIGHT 2012 IGE XAO All rights reserved Page 4 A Installation of SEE Electrical V7R1 electrical i Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved A INSTALLATION OF SEE ELECTRICAL V7R1 Install the version into an empty folder It is not possible to overwrite an existing old version Depending on whether SEE Electrical was already installed or not follow the instructions below in this chapter There you will also find information about which parts of the SEE Electrical software must be moved to a network directory what is the procedure when SEE Electrical data is used by several users or it is simply installed on a drive A 1 HARWARE AND OPERATION SYSTEM A 1 1 MINIMAL CONFIGURATION v Windows XP SP3 v Simple Core 1 9GHz processor v Live memory RAM 1GB v Required free disk space 10GB A 1 2 RECOMMENDED CONFIGURATION v Windows XP SP3 or Vista SP2 or Seven v Dual Core processor v Live memory RAM 4 GB v Required free disk space 10 GB v Graphic card Intel Matrox ATI any processor with internal memory not less than 1 GB and minimum resolution 1024 x 768 strongly recommended Full HD Note The machine must have a free USB 2 port for the dongle and a CD ROM in case of installation from a CD A Installation of SEE Electrical V7R1 Page 5 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved A 2 RIGHTS DURING INSTALLATION
17. ckup before you perform an uninstall or reinstall Save the contents of the directories Projects GSymbols Templates in the network Notes for the Symbols directory The System Ses and List of text placeholders ses files must not be applied because these files are related to the version If you have not created any user defined cable symbols we recommend you not to convert the Cables ses file because this file already exists in the V6R1 The OGI files from the directory Symbols is also related to the version and must not be saved Notes for the Templates directory Files to save v Wires msw database of wire properties v Translation mab translation database v Cables mdb user defined cable database v Ifyou have not created any user defined cable symbols we do not recommend you to save the Cables madb file All files with the endings tdw txt dat The cds LbL Lbp Lbv Lst Lsv Lsp files for the Lists and labels module SS From Templates you must by no means save the SYSTEM SEM file and the files with extension EXT and RPT because these files relate to the version Page 36 F Installation of Workspaces Symbols and Templates in a Network if Older Version of see electrical Has Been Installed Before electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved If necessary remove the old version of SEE Electrical The installation must be made in a new d
18. es because here even users with restricted rights have enough rights The User profile must receive Administrator rights during the installation and programming of the dongle The Administrator rights can be removed after installing and licensing B 1 LICENSE SEE ELECTRICAL WITH A DONGLE B 1 1 LICENSE WITH A DONGLE INTRODUCTION A Dongle Hardlock can be available as a single position dongle or as a network dongle In this chapter you will find the instruction for licensing with a single position dongle If you are not familiar with the program we recommend after licensing with a dongle to work through the Workspace Example 1 in the User Manual to get a general introduction into the program If SEE Electrical must be used on several computers license the software on all of the computers as described below However the dongle must be programmed only once and the plug connection can be changed afterwards B 1 1 a PROGRAMMING OF THE DONGLE Insert the dongle in the parallel or USB port of your PC After installing SEE Electrical in the Windows Start menu select Programs gt IGE XAO gt SEE Electrical V7 and run the Program Dongle command B Licensing Types Page 11 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved The following window appears Protection Key Programming 1 1 x Programming key type HASP Select file Protection key number in Decimal 584617138 Code
19. have to fit it to the format of version V7R1 After this the data cannot be used any more together with older versions of SEE Electrical Page 34 D Updating from an Existing SEE Electrical Version V5R1 electrical i Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved E UPDATING FROM AN EXISTING SEE ELECTRICAL VERSION V4R1 AND OLDER E 1 CONVERSION OF EXISTING USER DATA WHEN USING OLDER VERSIONS OF SEE ELECTRICAL First secure your data Because data is now stored in an Access 2000 database it is necessary to convert all the files that have been based on an Access database in the past projects libraries additional databases The Converter for old projects symbols and additional databases Wire database VVIRES MSVV Cable database CABLES MDB and Translation database TRANSLATION MDB all in templates directory into Microsoft Access 2000 format is located in the SEE Electrical folder Its name is CADdy2SEP EXE You will also find the converter in the Windows Start menu in the group SEE Electrical V7 Please copy your old files in the directories used for SEE Electrical V7R1 by default projects symbols templates before starting the converter The converter will replace them by files in Access 2000 format The old files are copied into a folder Backup beneath the folder where they have been New file names Description Old Name a een a Imma New name Folder Default Workspace
20. irectory you cannot install it over an existing version of SEE Electrical However you can install the new version parallel to the old one or uninstall the old version before installing the new one Before uninstalling check your backup Here is described the data transfer from the version V5R1 Note If you transfer data from an older version of SEE Electrical than V5R1 you must convert the files You will find instructions for converting the data under Conversion of data from V5R1 and older version Copy the saved data again into the proper directories If your data projects type database etc is processed for the first time with the new version of SEE Electrical you will have to fit it to the format of version V7R1 After this the data cannot be used any more together with older versions of SEE Electrical F Installation of Workspaces Symbols and Templates in a Network if Older Page 37 Version of see electrical Has Been Installed Before electrical I Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved G USING V7R1 AND V6R1 OR V5R1 IN PARALLEL G 1 CUSTOMERS WITH SOFTLOCK AND VERSION V6R1 OR V5R1 It is possible to use SEE Electrical V6R1 and SEE Electrical V7R1 at the same time if your licence code is the same The procedure is the following Remove on the internet the licence code for V6R1 Open SEE Electrical V7R1 Licence the product After you have licensed SEE Electrical V7R1 you ha
21. isplayed in green or in blue in case you borrowed the license If you borrowed the license the number of days left is also displayed Attention A license will be taken from the license server each time SEE Electrical is started The license will be transmitted to the license server and thus will be available again as soon as SEE Electrical is closed except it is borrowed If you have borrowed a license you have to Free license first before a license can be taken again Page 30 B Licensing Types electrical I Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved B 3 4 LICENSING AUTOMATICALLY THE NEW VERSION IF AN OLD VERSION OF THE SOFTWARE IS ALREADY INSTALLED If you install a new version on a computer that already has a previous version of SEE Electrical V6 build 16 or higher and the version is licensed via software key the licensing of the new version is done automatically B 3 5 SILENT LICENSING IF USING THE REMOVE THE LICENSE WHEN CLOSE THE APPLICATION OPTION If you use the Remove the license when close the application option a new registry key License General AskToLicenseOnOpen allows you to define if the program will ask you or not about the licensing on the startup Value 1 a message appears Value 0 the message will not appear but the software will try to license automatically in case there is a valid license code This new registry setting is useful when you try to open a
22. l V7R1 Page 7 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved You can select who will use this software Select the Anyone who uses this computer option to allow to all users access to the program Select the Only for me option to allow access only to the current user is SEE Electrical V7 InstallShield Wizard Customer Information Please enter your information User Name public Organization IGE xAO Install this application for 7 Anyone who uses this computer all users Only for me public InstallShield Click Next to proceed Ps SEE Electrical V7 InstallShield Wizard Setup Type Choose the setup type that best suits your needs Please select a setup type Complete All program features will be installed Requires the most disk space Choose which program features you want installed and where they will be installed Recommended for advanced users InstallShield Page 8 A Installation of SEE Electrical V7R1 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Select the type of installation Complete will install the typical parameters Note If you select Custom you can choose which parameter to install and also change the installation directory JB SEE Electrical V7 InstallShield Wizard Custom Setup Select the program features you want installed C
23. lick on an icon in the list below to change how a feature is installed p E v Program files Feature Description E v Building Circuit Diagram EN Es This feature will be installed on local hard drive G8 This feature and all subfeatures will be installed on local hard drive X This feature will not be available C Program Files x86 IGE XAO SEE Electrical V7 InstallShield Hep __ space __ lt Back J _Newt gt canei o A Installation of SEE Electrical V7R1 Page 9 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Choose an option and click Next 5 SEE Electrical V7 InstallShield Wizard Ready to Install the Program The wizard is ready to begin installation Click Install to begin the installation If you want to review or change any of your installation settings dick Back Click Cancel to exit the wizard InstallShield Click Install to begin the installation of the software After the installation has been completed click Finish to exit Restart your computer if necessary Unlock the software Depending on whether your version is protected with a Softlock or with a Dongle you will find more instructions for the unlocking procedure in the appropriately named file on your SEE Electrical CD in the DOCUMENTS D UNLOCKING subdirectory Important If you use Windows Vista or Windows 7 and you want to link the sh
24. limited within your license B Licensing Types Page 25 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Free license again By clicking the Free license button in the License my software over the Internet dialog box you can remove your license code from the PC where it was installed and then you can license SEE Electrical on another PC Before clicking the Free license button enter your licence password again Request sent Response received Response received Circuit diagrams EN Unlock code received Circuit diagrams IEEE Unlock code received Cabinets Unlock code received Installations Unlock code received Tree builder Unlock code received PDF Generator Unlock code received Licence code s removed If you receive a message Licence code s removed the licence has been released again Remove licence automatically when SEE Electrical is closed Proxy settings Page 26 It is possible to remove the license each time when the program is closed If you want to do so enable the setting Remove the license when close the application in this window Make sure you are connected to the internet If the setting is enabled the system asks each time you close the program if the licence shall be removed If you choose Yes you have to licence again next time you want to use the program The Proxy settings button in the License Wizard dialogue to allow you a connection b
25. menu press the System settings button Open the Directories tab Enter the new directories Page 32 C Installation of Workspaces Symbols and Templates in a Network if no sEe Electrical Has Been Installed beforE electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved D UPDATING FROM AN EXISTING SEE ELECTRICAL VERSION V5R1 First secure your data A parallel installation of V5R1 and V7R1 versions of SEE Electrical is possible However it should be noted that projects page and project templates type databases and symbol libraries that have been opened with version V7R1 cannot be processed using an older version of SEE Electrical Make sure that you have strictly removed all data If you use a softlock free the licence of V5R1 or of an older version before installing V7R1 Make a backup copy before the uninstallation installation procedure Save the contents of the directories Projects iSymbols Templates Notes for the Symbols directory The System Ses and List of text placeholders ses files must not be applied because these files are related to the version If you have not created any user defined cable symbols we recommend you not to convert the Cables ses file because this file already exists in the V7R1 The OGI files from the directory Symbols is also related to the version and must not be saved Notes for the Templates directory Files to save v Wires msw dat
26. n order to register the SEE Electrical license again after an update After licensing you can use SEE Electrical unlimited If you are not familiar with the program we recommend to work through the Workspace Example 1 in the User Manual to receive a general introduction into the program B 3 1 DIFFERENT NETWORK CARDS USED DURING SOFTLOCK LICENSING Before you start the licensing procedure SeeProtectionConfig exe can be used to define which network card shall be used to calculate the Softlock in case for example an internal network card is present at the computer but a wireless networking key has to be used when licensing Choose the one to use and press OK EY SEEProtection Configuration xi Select connection adapter Bluetooth PAN Network Adapter Paketplaner Miniport Marvell Yukon 88E8053 PCI E Gigabit Ethernet Controller Paket Intel R PRO Wireless 29154BG Network Connection Paketplaner Mini B Licensing Types Page 23 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved B 3 2 LICENSE WITH A SOFTWARE KEY By using this method of licensing it is possible to enable an already installed license again a license can be used on a company PC and on a laptop alternately The releasing of the license must be made before uninstalling or reinstalling of SEE Electrical or before reinstalling the operating system on this PC or exchanging the hard disk etc It is req
27. n to succeed there must not be a HASP License Manager running If one is running please select Cancel stop the License Manager and try again Aladdin Cancel B Licensing Types Page 13 electrical I Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved dv End User License Agreement ALADDIN KNOWLEDGE SYSTEMS LTD HASP License Manager LICENSE AGREEMENT IMPORTANT INFORMATION PLEASE READ THIS AGREEMENT CAREFULLY BEFORE DOWNLOADING OR INSTALLING THE SOFTWARE PROGRAM ALL ORDERS FOR AND USE OF THE HASP License Manager including any revisions corrections modifications enhancements updates and or upgrades thereto hereinafter Software SUPPLIED BY ALADDIN KNOWLEDGE SYSTEMS LTD or any of its affiliates either of them referred to as ALADDIN ARE AND SHALL BE SUBJECT TO THE TERMS AND CONDITIONS SET FORTH IN THIS AGREEMENT BY DOWNLOADING THE SOFTWARE as defined hereunder AND OR BY mn min mm I mM AI mar a A ma tr am AR ammm do not accept the license agreement lt Back Install gt Cancel Accept the agreement Press Install Select how to install the NetHASP License Manager Service nhsrvice exe and quit the window with Next d Installation Type Do you want to install HASP License Manager as an application or as a service C Application nhsrvw32 exe Aladdin lt Back Cancel Page 14 B Licensing Types electrical i In
28. nd more info on how to execute this action in the chapter License with a software key H 2 2 DONGLE The dongle code given for your V7R1 is only valid for V7R1 and V6R1 You cannot use it to work with an older version If you need to work with V4R1 gt 148 too contact your delivery department H Using V4R1 and V7R1 Page 39 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Page 40 H Using V4R1 and V7R1
29. o use the serial number provided you by your SEE Electrical dealer It is also displayed in the of the License Server Window in the Available licenses section v pass key to use during the licensing process the pass key provided you by your SEE Electrical dealer When the users log in to the local license server the number of the currently used licenses currently will be updated in the License Server Window in the Available licenses section Setup each computer for each single user The license available via local license server is a softlock license Choose the License from Local Server option if you want to use a local server Before the local server can be addressed it has to be prepared Type your serial number Click the License on local server button Define the IP address and Server port of the server For any additional information please contact your administrator Type your password This is the password provided you by your distributor If you want to borrow a license to be able to work without connection to a local network for a certain amount of days define the number of days you need to borrow the license in the Borrowed day s field A maximum of 90 days is possible If the value in Borrowed day s field is empty the PC must be connected directly to the local license server to work with the software Press the License button The modules in the License wizard window will be d
30. ortcut to the project data in the operating system you must run the software only as Administrator To do this right click the program icon of SEE Electrical and select Run as Administrator in the pop up menu Confirm the security message with Allow und close the program again Page 10 A Installation of SEE Electrical V7R1 electrical i Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved B LICENSING TYPES This chapter helps you to license SEE Electrical If you work with Administrator and User profiles there are two procedures for installing and licensing v The software must be installed and the dongle programmed under the Administrator s account If the user must log on as main user on the computer it is enough to fill in and close the License wizard If the user logs on as User with limited rights rights for full access or rights for editing the main directory and all subdirectories of SEE Electrical must be given from the Administrator If you use the Safe mode or Bachup function this has to be done also for the folders projects and temp in the SEE Electrical folder These folders are not generated on installation but are automatically generated on the first execution of the Safe mode or Backup functions If Windows home version is used it is not possible to enhance the rights for restricted users in folders In this case we recommend that you install the program in the folder My fil
31. project from the Windows Explorer or PDM systems like Microsoft Share Point etc Then it won t be possible to open a project if this message appears so you need to switch it off B 3 6 TERMINAL SERVER SUPPORT SEE Electrical can be used in terminal server environments for licenses licensed via softlock by internet or local license server or FlexLM It is necessary to license each individual user The licensing algorithm detects if the software is used in such an environment and adds user name to the licensing process For example if three users want to use the software in the same time you will need three licenses Dongle protection cannot be used if the software is installed on terminal server In case the software is installed on terminal server or remote desktop that means in any case where RDP protocol used a message informs you in case protection by dongle is chosen B Licensing Types Page 31 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved C INSTALLATION OF WORKSPACES SYMBOLS AND TEMPLATES IN A NETWORK IF NO SEE ELECTRICAL HAS BEEN INSTALLED BEFORE Copy the contents of the sub directories Projects Symbols and Templates into the desired network drive Here rights must exist for writing reading modifying and creating files We recommend you to delete or rename the local directories Projects GSymbols and Templates Start SEE Electrical From the File
32. r license file field and load the lt Name LCS file Select the LOG file to use to write the protocol for the starts stops of the license server and the login logout of the users too With the Clear log file button you can delete all entries in the log file from time to time to keep a better overview Define the port to use For example you can use port 999 You can use any TCP IP port number as long as it is not used by any other service for example port 80 is used for http protocol and port 21 is used for FTP communication Port 999 is free on windows operating systems Save your settings by using the OK button B Licensing Types Page 29 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved As soon as a license file is defined in the settings the SEE Electrical License Server Manager displays the serial numbers the modules the levels and the number of licenses available in your license To start the server press the Start Server button You can see if the server is running or not in the Current status field To stop the server press the Stop Server button Inform the users that the local server is available and that they can license the SEE Electrical on their local computers now You need to forward the information about the v IP Address of the server Settings window of the License Server Window v port to use Settings window of the License Server Window v serial number t
33. runs then it must be ensured that the port 475 is routed into the respective network segment Check therefore the settings of your router and if necessary change the configuration Page 18 B Licensing Types electrical I Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved B 2 2 INSTALLATION OF SEE ELECTRICAL PER CAD COMPUTER IN THE NETWORK Start the installation from the SEE Electrical CD ROM and follow the installation instructions administrator rights are necessary to perform the installation During the installation a PROTECTION XML file is copied into the SEE Electrical folder lt xml version 1 0 encoding UTF 8 gt lt xml version 1 0 encoding UTF 8 gt lt PROTECTION PARAMETERS VERSION 1 0 xmins xsi http www w3 org 2001 XMLSchema instance gt lt TYPE MERGE_LICENSE NO HARDWARE YES SERVER_SEARCH NO gt lt SERVER_INFO SERVER_NAMEs gt lt TYPE gt lt PROTECTION_PARAMETERS gt Edit the file with a XML Editor and in case you use a network dongle make sure that the SERVER_SEARCH is set to Yes In this case add to the IP address of the server the SERVER_INFO SERVER_NAME keyword between After the installation from the CD copy from the folder HLDRV SERVER the file NETHASP INI into the Windows folder Open the file and change the IP address in such a way that the IP address belongs to the computer on which will be placed later the network dongle The entry looks for
34. s projects jects eee es mdb SS mdb ae database Translation Translation mdb TranslationNew mdbj _ templates database Symbol symbols libraries The default settings for the converter are located in the master project _Convert c2s in SEE Electrical folder If you want to add specific SQL queries or add user defined project information texts to all the converted projects this master project can be changed To do so rename it to SEP as extension treat it as a normal project and rename it back E Updating from an Existing SEE Electrical Version V4R1 and Older Page 35 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved F INSTALLATION OF WORKSPACES SYMBOLS AND TEMPLATES IN A NETWORK IF OLDER VERSION OF SEE ELECTRICAL HAS BEEN INSTALLED BEFORE A parallel installation of V6R1 and V7R1 versions of SEE Electrical is possible However it should be noted that projects page and project templates type databases and symbol libraries that have been opened with version V7R1 cannot be processed using an older version of SEE Electrical Therefore we do not recommend you the parallel installation if symbols templates and projects are stored on the network unless a strict separation can be guaranteed If you use a softlock free the licence of SEE Electrical V5R1 or of an older version before installing SEE Electrical V7R1 All workstations must be changed simultaneously Make a ba
35. stallation Manual COPYRIGHT 2012 IGE XAO All rights reserved Enter the name of the folder where the program shortcut will be located later and press Next s Choose Destination Location Setup will install HASP License Manager in the following folder To install into a different folder click Browse and select another folder You can choose not to install HASP License Manager by clicking Cancel to exit Setup Destination Folder D Program Filest laddintHASP LM Browse Aladdin preen Select a program group to add HASP License Manager icon to dv Select Program Manager Group Enter the name of the Program Manager group to add HASP License Manager icons to laddintHASP License Manager Accessories Administrative Tools Autodesk CAD dy Electrical Foxit Reader Games IGE X 40 Irfanview IZArc Mozilla Firefox Okidata RC WinTrans 7 Aladdin SEE Electrical SEE Electrical LT lt Back carnal B Licensing Types Page 15 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Press Next The dongle drivers are installed after the installation of the License Manager s Device Driver Installation HASP License Manager needs a HASP HL Device Driver version which is not currently installed on this system HASP HL Driver Version 5 40 This driver will be installed now Aladdin Cancel In case the drivers
36. toy D Program Files Aladdin DiagnostiX Create Configures the nethasp ini Enable the Customized ini file option and then the Server IP check box in the right pane of the nethasp ini Configuration window Click the button In the new window in the Available elements area select the IP of the servers to be used and the server names Press the gt button and confirm your modifications with Apply Set the window folder e g C Windows in the Select folder area Click the Create button Page 22 B Licensing Types electrical i Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved B 3 LICENSE VVITH A SOFTVVARE REY INTRODUCTION If you use a software key the computer where SEE Electrical must be licensed has to be connected to the internet If you do not have the possibility to connect your computer to internet at least to license V7A7 contact your dealer as you have to use a dongle in the future Hint The use of the software is allowed only within your contract and or the License agreements displayed during the installation Attention If a new installation of SEE Electrical is needed later the licensing procedure must be executed again The releasing of the license must be made before uninstalling or reinstalling SEE Electrical or before reinstalling the operating system on this PC or changing the hard disk etc It is required to free the license i
37. uired to free the license in order to register the SEE Electrical license after an Update again If SEE Electrical Version V7R1 and an older version are used on the same computer parallel the following particularities apply you have to release the license for the version V5R1 before you can license the version V7A7 and vice versa If you start SEE Electrical for the first time the License wizard appears automatically Enter your company data here Select the type of protection used for your software My software is protected with a software key or this is a trial version Click Next The License wizard dialog box appears see below If you don t register the license now you can perform this by executing File menu gt System Settings gt License tab In this case all the workspaces must be closed The following dialog box appears System Settings x 4 EL General FE Folder 22 Colourandlayout jj Licence b Licence software Serial number j 2345678 Licence on internet PC Licence No 5791J60 WN58E590547NB Proxy Settings Unlock code Module Level Status Days left Show module Licence Circuit ADYANCED Rent diagrams Extend Trial EN Licence Circuit ADVANCED Rent diagrams Extend Trial IEEE 8 Licence Installations ADVANCED RE El Remove the licence when close the application i OR Cancel Page 24 B Licensing Types electrical i Installation Manual COPYRIGHT
38. ve to license SEE Electrical V6R1 also It is not automatically licensed After you can use the two versions parallel Note You can remove the licence only for SEE Electrical V7R1 In this case the license for SEE Electrical V6R1 is automatically removed Page 38 G Using V7R1 and V6R1 or V5R1 in Parallel electrical i Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved H USING V4R1 AND V7R1 H 1 CUSTOMERS WITH SOFTLOCK AND VERSION V4R1 The software used for the protection had to be changed to improve support with MS Vista and Windows 7 Additionally with the new protecting software it is not necessary any more to have administrator rights to license or remove the license Because of the change of protection the licensing of the program by software in the future is only possible if the computer is connected to the internet while licensing If you have licensed by software the V4R7 and do not have the possibility to connect your computer to the internet in order to license V7R1 please contact your dealer as you have to use a dongle Because of the new protection software you have to put your V4R1 license to the database on the internet before you can license the V7R1 For the installation you still need Administrator rights H 2 SIMULTANEOUS USE OF SEE ELECTRICAL V4R1 AND V7R1 H 2 1 SOFTLOCK The licence for the version V4R1 has to be released before licensing the version VZR tand vice versa You can fi
39. ved Example Proxy Server Settings x Proxy Server J Use Proxy Server Proxy Settings Address 192 168 1 21 Port 80 J Use Proxy Authentication XXXXXXXXXXXX User Name USerl Password ae EEE EE PEN a P A aniidae mbdicdatr Sedatie eeatt Use semicolons to separate entries OR Cancel Save your settings with OK B 3 3 LICENSING SEE ELECTRICAL VIA LOCAL LICENSE SERVER If you work on a high security level and you do not have access to the Internet for your local network or workstation you can use the local license server The use of a local license server offers the possibility to borrow a license for a certain amount of days This means that if your company has several licenses the users can check out the license from the server The license is then available on the user s computer even if it is not connected to the company network After the determined period the license is blocked if the computer is not connected to the company s network Note The license available via the local license server is a softlock type license Page 28 B Licensing Types electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Setup the local server You have to possess Administrator right to setup the local server Copy the SEE Electrical Server Manager files into an appropriate folder on the server The necessary files are the following v SEEServerManager Exe v SEEProtectionService
40. y using proxy settings Licence Wizard x Licence software Serial number fi 2345678 Licence on internet PC Licence No 5 791J60 WN58E590547NB Proxy Settings B Licensing Types electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reserved Click the Proxy Settings button and enter the information in the dialogue that appears Proxy Server Settings x Proxy Server V Use Proxy Server Proxy Settings Address Port 80 Use Proxy Authentication User Name Password V Do not use proxy server for following addresses Use semicolons to separate entries OK Cancel Enable Use Proxy Server The input fields for IP address Address and port of the Proxy server Port are activated If you do not know the appropriate values ask your network administrator If you use a Proxy server with authentication you can switch the setting Use Proxy Authentication and type the User Name and the Password used for this Do not use proxy server for following addresses You can click to select the Bypass proxy server for local addresses check box if you do not want the proxy server computer to be used when you connect to a computer on the local network this may speed up performance For more information refer to http support microsoft com kb 135982 B Licensing Types Page 27 electrical Installation Manual COPYRIGHT 2012 IGE XAO All rights reser
Download Pdf Manuals
Related Search