Home

User Manual 3-Line

1. 57 iv Venture 3 Line Telephone User Guide E to Venture the three line phone system that you can customize to function the way you want Up to eight Venture phones can be linked to form a system by wiring them so that thesame telephone line appears as line 1 on all other phones e there can be up to 500 feet of wiring between two phones Individual Venture phones have access to the following features e the display of telephone service provider caller ID e full duplex Handsfree speakerphone e a Directory of 200 names and numbers e alog of the name and number of your last 200 callers call Hold and Conference e eight memory keys e a Redial list of the last 10 numbers called from your phone e aServices list used to activate 20 services and features to which you subscribe from your telephone service provider Venture phones linked together in a system have these additional features calling and paging between Venture phones e Call Transfer e an automatically generated list that includes the user name and ID number for every phone in your system e shared Directory line and phone status indication on all phones sharing lines The Quick Start Card enclosed with your phone provides the basic information you need to use your Venture phone right away including a description of the functionality of each key on the phone Detailed information about features and u
2. or to access the list If the number is in the Phone list skip to step 3 Note If you receive an incoming call while you are in any list you will be bumped out of the list 2 goto a Directory or Callers sublist press to locate the sublist that you want ES Note To locate a name in the Directory quickly press the key with the first letter of the name until the letter appears on your display 3 Press or to find the item 08 Note You can press at any time to exit a list To make a call or activate a feature 1 Retrieve the item Note If the phone number on the display is not exactly what you would dial for example a required area code is missing or an area code that you do not need is included see To change information on page 29 2 Press 3 If you are activating a feature follow the instructions provided by your telephone service provider To change information E gt Note Phone list information can only be changed by the owner of Venture 3 Line Telephone User Guide 29 a phone using options 23 Phone ID or 24 Phone name on page 24 Retrieve the item If you are in the Redial list skip to step 4 2 Press Change Note If your display shows List is locked see option 22 Lock lists on page 24 3 Follow the display prompts to locate the information you want to change I Note For
3. Foor monitor OFF Disables the Room monitor function OW Enables one phone to monitor the sounds in an area near another phone such as a baby s room a reception area that is unattended without ringing the phone This option allows you to listen only You cannot be heard when you speak See also Set ting up Room monitor on page 18 Venture 3 Line Telephone User Guide 21 Options chart Number and Option Settings default Option function as Memory keys prog Stores Don t disturb Page Room monitor or Call timer option to a memory key For additional information see To save an option to a memory key on page 27 Secure number When you secure a number the private numbers such as passwords PIN s personal identification nurrbers and access codes that follow it are replaced with to keep them from showing on your display You can secure up to five 12 digit numbers For exarrple if your bank PIN is 3333 and your bank phone nurrber is 555 4444 make 555 4444 a secure number Then when you call your bank your display will show 555 4444 and when you dial the 3333 the display will show 18 Clear Msg Mta If you subscribe to the telephone service provider voice messaging service feature and the Message waiting prompt and telephone light remain on after you have re trieved your messages this options turns them off If this does not work see You can tt
4. 4 Press the cord into the channels on the bottom of the stand Removing the stand 1 Firmly grasp the stand and the phone 2 Pullhard until the units separate ES Note You will hear a loud cracking sound as the units separate Installing a phone on a wall If you want to install a Venture phone on the wall you must terminate all the telephone lines you want to appear on it on one phone jack In addition you may need to purchase a wall mount plate from a telephone service provider or from an electronics store Press the CAM into the cavity in the back of your phone Plug one end of the black short 8 wire cord to the phone port of your CAM Plug the other end of the black short 8 wire cord into the CAM port on the back of your phone Plug the power adapter cord into the power adapter port on the CAM Plug the power adapter into an electrical outlet Plug one end of the silver short 6 wire cord into CAM port 1 Plug the other end of the silver short 6 wire cord into the wall mount plate jack Align the slots on the back of the phone with the studs on the wall mount plate Slide the phone down until it locks into place Venture 3 Line Telephone User Guide 11 Getting started Setting up your phone After plugging in the phone you will see X Enalish Espan 1 JAN 12 00 1 Press E s or 1 to select the language for your phone display 05 Note If you want to
5. 4 Press v The display shows Password and the number Your caller can t hear you 1 Ifyou are using the handset check the handset cord connections 2 Ifyou are using the Handsfree speaker make sure that you have not muted it The light beside the Handsfree Mute key flashes when mute is turned on You can t dial from the Callers list You can dial a number in the Callers list but the call does not connect or you get a recorded announcement e You may need to add or delete long distance prefix or an area code See To change information on page 29 You can t turn off the message waiting light Your message waiting light cannot be turned off using Option 10 Clear Msg Wtg on page 22 The problem is related to the type of message waiting signalling provided by your telephone service provider and not with your Venture phone Venture 3 Line Telephone User Guide 39 e Report the problem to your telephone service provider 40 Venture 3 Line Telephone User Guide TE Venture phone is fully supported by Aastra Telecom W arranty and repairs If you have a problem with your phone return it to where it was acquired Cleaning the display Use only a soft cloth soaked in isopropyl alcohol to clean the display Warning Do not use a dry cloth it might scratch the surface Do not use ketone acetone toluene or xylene They may damage the coating General inquiries If you have rea
6. TsLz MOVszmS inc 800 336 4864 www tele movers com THREE LINE TELEPHONE User Guide wt AASTRA Tedeccorm Venture 2 Multiline Communications System 349 Introduction aS savanna se 1 2 Key desepiptoHs ve EDI UNE 3 Unpacking the aca wens 4 Getling started soe o iini o RR GRO DERE GOL OL 5 Preparing for the installation eee 5 Installing the phone 1i te nar 7 Installing a phone on a wall eene 11 Setting up your phone lias ette caa See 12 Tour Phone tle RE 13 Checking the 1 tus 13 WAC SMOKE EET 13 Making and receiving calls 14 Cad Sia cece e 14 Answering 15 Answering second calls aea eb 15 Answering Call Waiting calls esee 15 Adjusting receiver volume auci tede 16 Using the Handsfree and Mute features during calls 16 Transferring calls 16 Making conference calls ose 17 Paging all PHONES o aos eee rei 17 Venture 3 Line Telephone User Guide i Paging ong 18 To answer d eR ai AVR E Ee Tee 18 Setting up a Room monitor esee 18 Programming
7. calls your display shows Join call Reserve line Press to join the ongoing call OR When the reserved line becomes available your phone beeps and the display shows Line x available reservation press C Line or again Use the dial pad to enter the phone number you want to call 3 When you complete your call hang up or press to release the call To make an intercom call An intercom call is a call to another phone in your Venture system 14 Venture 3 Line Telephone User Guide Press to reserve the line If you decide to cancel your Pressi 2 Usethe dial pad to enter the ID number for the Venture phone you want to call I Note When you cannot complete your intercom call one of the following three messages appears on your display System is busy o intercom channel is available Phone busy the phone you trying to reach is busy Phone not resPondins the phone is not communicating see Communication problems on page 37 Other ways to make a call Any number stored in a Venture list or to a memory key can also be used to make calls See Using the list keys on page 29 and Using the memory keys on page 26 Note When you make a conference call using the telephone service provider Three way Calling feature you must use to connect each participant in the call Until you have connected all the
8. repeatedly until the display shows the phone you want to page Hold down the intercom key for two seconds OR If you have saved that phone ID to a memory key hold down the memory key for two seconds 2 Wait for the tone to end 3 Speak into the handset or the Handsfree microphone 4 Hang up or press to end the page 18 Venture 3 Line Telephone User Guide To answer a page When all phones in the system are paged you will hear two short tones before the initiator begins speaking You can listen but you can not respond When only your phone has been paged you will hear a tone at 15 second intervals until you pick up the phone or press the Handsfree key If you have Handsfree answer turned on see Option 03 Hndfree ansr on page 21 you can answer the page by talking into the Handsfree microphone without picking up your handset Setting up a Room monitor Room monitor is used to listen to the sounds in a room such as an unattended lobby or a baby s room To set up Room monitor on the phone being monitored 1 Press Options 2 Press W until the display shows 077 Room monitor OFF 3 The display shows Room monitor ON To set up Room monitor on the monitoring phone 1 Press Options 2 Press until the display shows 08 Memory keys prog 3 Pressx The display shows Don t disturb 4 Press until the display shows Room monitor 5 Press display shows P
9. and allow the product to dry out to see if it still operates but do not open up the product C If the product housing has been damaged D If the product exhibits a distinct change in performance 12 Avoid using a telephone during an electrical storm There may be a remote risk of electric shock from lightning 13 Do not use the telephone to report a gas leak in the vicinity of the leak 14 CAUTION To eliminate the possibility of accidental damage to cords plugs jacks and the telephone do not use sharp instruments during the assembly procedures 15 WARNING Do not insert the plug at the free end of the handset cord directly into a wall or baseboard jack Such misuse can result in unsafe sound levels or possible damage to the handset 16 Save these instructions The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance serving instruction in the lit erature accompanying the product A This symbol on the product is used to identify the following important information Shock Hazard Warning To avoid potential electrical shock hazard to personnel or damage to the telephone use only the manufacturer supplied equipment and installation procedures Specifically use only 6 conductor modular Teladapt plug cords with this product and the AC transformer must be CSA UL or CSA NRTL C approved Class 2 level C r
10. autodialer 27 calls 14 from a list 29 Directory 24 29 34 Callers list information 33 delete a Directory 33 information organization 34 item retrieval shortcut 29 items in list 34 main list 34 Private 24 32 34 Public 24 34 setting up 34 display Callers list 33 58 Venture 3 Line Telephone User Guide cleaning 41 language 12 Don t disturb 20 27 on a memory key 22 status message 36 E electrical outlet 5 end a call 14 enter name 12 number 13 external calls answering 15 placing 14 F feature ON 36 turn light on off 28 32 feature codes 35 H handset card 12 connecting 7 cord 7 Handsfree 16 activate 16 automatic page answer 21 dialing 14 Handsfree Mute key 21 Headset 21 home run 45 information storage and access areas 29 installation 5 Installation planning worksheet 5 6 intercom dialing 14 look up numbers 13 34 making calls using a mem ory key 27 J jack pin out 45 join call 14 L language change selected 25 display 12 line automatic answer 22 automatic selection 22 longest ringing 22 reservation 14 ring tone 24 line in use 14 Line x available 14 Line x Reserved 36 lines connecting three lines to phone jack 47 48 list definitions 34 retrieve an item 29 lists activate a feature 29 delete information 27 31 make a call 29 using 29 locate a sub directory 31 lock lists 24 M main list 34 Make calls first 17 making a call 14 dialing 14 lists 14 29 memory k
11. change the language you have selected see Display language error on page 37 2 Enter a number between Oland 99 for the phone ID If you have more than one phone each phone must be assigned a different phone ID The display shows Please wait while it confirms that the two digit number you entered has not been used for another phone When it is finished checking the display shows confirmed 12 Venture 3 Line Telephone User Guide GHIA 57 027 Note If your display shows Invalid Phone ID Please try again instead of confirmed enter a different number Press Save Your display shows Enter a name for this Phone Repeatedly press the dial pad key on which the letter or symbol is located until the display shows the one you want amp 1 MNO6 wxvze fo 0 EJJKL5 35 Note In each word an initial capital letter is followed by lower case letters Press til to change to a capital or lowercase letter If the next letter or symbol is on the same key as the last one or you want to insert a space press to advance the cursor Repeat steps 4 and 5 until you have entered the name Note A name have up to 16 characters including spaces Press Save Fill out the handset card Insert the handset card on the front of the phone 10 Press each line key to which a telephone lin
12. conference call participants no one else in your system can be on the telephone line used to set up the conference Answering calls If you subscribe to the telephone service provider Calling Line ID feature your phone displays the information provided by the telephone service provider usually the caller s name and number when you receive a call 1 Pickup the handset or press the Handsfree Mute key the flashing key the flashing line key or the flashing memory key 05 Note If more than one incoming call is ringing your phone automatically selects either your prime line or the line that has been ringing the longest based on the way you have set 12 Answer line on page 22 Answering second calls When you are on a call and second call comes in on another line your phone beeps the indicator light for the line on which the second call is coming blinks and if you subscribe to the telephone service provider Calling Line ID feature appears on your display Press to see information about the second call 2 Ifyou want to interrupt your current call to answer this new call press the line key with the blinking indicator light You are connected to the second call and your first call is on hold 057 Note You can switch back and forth between the two calls by pressing these two line keys in turn Answering Call W aiting calls When you subscribe to the telephone service provider Call Waiting o
13. location To delete information 1 2 Retrieve the item Press twice The display shows Item erased Venture 3 Line Telephone User Guide 31 Note If your display shows List is locked see option 22 Lock lists on page 24 3 Follow the prompts on the display to complete the action To turn a feature on or off in the Services list Some telephone service provider features have two codes one to turn the feature on and one to turn the feature off You must save each code to a space in the Services list or to a memory key For more information on saving to a memory key see To turn a feature on or off on page 28 To save each code 1 Press Save 2 Press Services The display shows Enter feature code 3 Use the dial pad to enter the telephone service provider code 32 Venture 3 Line Telephone User G uide to turn the feature on or the code to turn the feature off 4 Save The display shows Press 1st letter to enter name 5 Use the dial pad to enter the feature name 6 Press Save _ The display shows Saved Services and the name of the feature To turn a feature and light on or off The telephone light on your phone can be programmed to turn on or off with one of the telephone service provider features such as Call Forward that you program to a memory key or to the Services list To save a code and a light setting 1 Press Services 2 Pres
14. Call Forward that you program to a memory key or to the Services list The feature and the light must be turned on together For each memory key 1 Save 2 Press toturn the light on or to turn the light off The display shows Save feature ON or OFF to 3 Press a memory key 4 Use the dial pad to enter the telephone service provider code to turn the feature on or the code to turn the feature off 5 Press Save The display shows Press 1st letter to enter a name 6 Use the dial pad to enter the feature name 7 Press Save The display shows Saved Memory key and the name of the feature TE Venture Directory Phone list Redial list Callers list and Services list are information storage and access areas You can use the information stored in these lists to place calls and activate features Phone list stores the name and ID of every phone in a Venture system Directory stores 200 names and phone numbers e The Redial list stores information on the last 10 calls dialed from a Venture phone e The Callers list stores information on the last 200 calls received by a Venture phone e The Services List stores information on up to 20 telephone service provider features 05 Note For more specific information about size and characteristics of these storage areas see List descriptions on page 34 To retrieve an item l Press Directory
15. Callers list ee beta 33 List CE SCHIST ONS ERU N 34 Status messages nnn nnne 36 Status message descriptions 36 Troubleshooting eene 37 Ay yoy see dud iurare 37 Display language etror 37 No dial Ome 37 Communication problems 37 Duplicate ID is displayed for unexplained reason 39 THe ai MON 39 You forgot your 2 0 1 39 Your caller can t hear VOU 39 You can t dial from the Callers list 39 Venture 3 Line Telephone User Guide iii You can t turn off the message waiting light 39 Maintenance and repair 41 Warranty and 41 Cleaning 41 General 1mq irieS 41 GIOSSONY 42 45 Running cable to phone 22 2 21 21 45 Winne the JACKS i i tetas ee adii des mda 45 Connecting the cord adapter module CAM 45 Regulatory erin 49 Canadian regulatory information eese 49 U S regulatory information eene 51 Index oues
16. If your display name and the number are already on the display you are finished Enter a number using the dial pad ES Note To insert a two second pause in the dialing sequence press Hold Press Save The display shows Press 1st letter to enter name If the name is already on your display skip to step 6 Repeatedly press the dial pad key that has the letter or symbol that you want to use until the display shows that letter or symbol shows Memory key is locked see option 22 Lock lists on page 24 2 Press a memory key Your display shows Enter number If the number is already on your display skip to step 4 If both the 26 Venture 3 Line Telephone User Guide amp 1 GHI4 PQRS7 ABC2 JKL5 06 TUV8 E WXYZ9 0 DEF3 Note To change to a capital or lowercase letter press a If the next letter or symbol is on the same key as the last one or if you want to insert a space press gt to advance the cursor Repeat steps 1 and 2 until you have entered the name Press a To change information Press the memory key Press to change the information shown on the display Note If your display shows Key is locked see option 22 Lock lists on page 24 Use to backspace over the numbers or letters you want to change and enter the correct information using the dial pad 4 Press Save To delete inf
17. WXYZ9 0 Note To change to a capital or lowercase letter press a If the next letter or symbol is on the same key as the last one or if you want to insert a space press gt to advance the cursor Repeat steps 1 and 2 until you have entered the name Press Save _ If you are saving to the Directory the display shows Save to Use to choose Note If you are saving to the Services list you are finished Press to locate the directory to which you want to save the information 10 Press Save To save information from another list or a memory key 1 Press Directory memory key where the information is stored If the number is in the Phone list skip to step 3 If you are in a list with sublists such as the Directory press 4 or to locate the sublist you want Press or to find the phone number you want to save Press Save _ The display shows Save to Note If your display shows List is locked see option 22 Lock lists on page 24 If you are saving to the Directory the display shows Save to Use to choose 05 Note If you are saving to the Services list you are finished Press to locate the directory to which you want to save the information Note If you have saved information to a new location and no longer want it in the original location you must delete it from the original
18. and external calls ON Stops the phone from ringing for external and internal calls The telephone light still flashes for incoming calls from outside your Venture system 20 Venture 3 Line Telephone User Guide Options chart Number and Option Settings default Option function a Receiveradge OH Allows the phone to receive pages OFF Stops the phone from receiving pages Hndtree OH When one phone is paged this setting lets you answer the page autorratically with out lifting the handset or pressing the Handsfree Mute key OFF When one phone is paged this setting lets you answer the page by lifting the handset or by pressing the Handsfree Mute key a4 Contrast level 4 Increases or decreases the contrast of the display on a scale from 1 the lightest to Qlevels 1 85 8 the darkest a5 Headset OH Enables you to make or answer calls through a headset plugged into the handset port on the back of the phone when you press the Handsfree key Provides dial tone through the Handsfree speaker or the handset Call timer FF Turns off the Call timer OH Activates the Call timer so that call duration information replaces the date and time usually shown on the third line of your display Call duration information is saved for the last call received on each line on your phone and for the last t 10 calls you placed See also To view call duration information on page 27
19. hearing aids equipped with an appropriate telecoil option and is compliant with the requirements for hearing aid compatibility of the Americans with Disabilities Act ADA Programming emergency numbers When programming emergency numbers and or making test calls to emergency numbers 1 Check with local authorities before making any test calls to emergency numbers 2 Remain on the line and briefly explain to the dispatcher the reason for calling before hanging up 3 Perform such activities in the off peak hours such as early mornings or late evenings CSA NRTU C installation instructions Warning Avoid electrical shock hazard to personnel or equipment damage observe the following precautions when installing telephone equipment 1 Never install telephone wiring during a lightning storm 2 Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations 3 Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface 4 Use caution when installing or modifying telephone lines Important safety instructions When using your telephone equipment basic safety precautions should always be followed to reduce risk of fire electric shock and injury to persons including the following 1 Read and understand all instructions 2 Follow the warnings and instructions marked on the product 3
20. memory key twice Memory keys can also be used to activate telephone service provider and Venture features Message Waiting If you subscribe to a call messaging service from your telephone service provider you will see this prompt on your display when a message has been left for you Navigational keys The four arrow keys that surround the action dia and 4 With these keys you can move up down and sideways through the Callers list Directory Phone list Redial list and Services list Non square In the Venture system a system configuration in which the first line must be the same on all the phones but the other lines can be arranged in any order Phone list The name and identification number of all phones in a Venture system are automatically stored in this list You can view Phone list information by pressing V when your phone isn t busy or by accessing your Public Directory POTS Plain Old Telephone Service is what you receive during a power failure You can receive and make calls on line 1 but you cannot use any other lines or features The display on your phone is blank when your phone is operating in POTS mode Square system A system configuration in which the same lines in the same order appear on each phone Star See Home run Teledapt jack A wall jack that is the termination point for the telephone lines being connected to phones or other communications equipment in a buildi
21. the Callers list enter the numbers you wish to dial before the number on the display or use to delete numbers you do not wish to dial You can now press to dial 4 Press 5 Use 4to backspace over the letters you want to change Enter 30 Venture 3 Line Telephone User Guide the correct information using the dial pad Press Saw US Note If Lock lists is turned on your display will show List is locked No changes made To turn Lock lists off see Option 22 Lock lists on page 24 To save information 05 Note If the information you want is in another list see save information from another list or a memory key on page 31 1 Press Save Your display shows Save to Note If your display shows List is locked see option 22 Lock lists on page 24 Press or C Services Your Directory display shows Enter number Your Services display shows Enter feature code Enter the number you want to save using the dial pad 057 Note To insert a two second pause in the dialing sequence press Hold Press Save The display shows Press 1st letter to enter name If you do not want to enter a name go on to step 8 Repeatedly press the dial pad key that has the letter or symbol that you want to use until the display shows that letter or symbol amp 1 ABC2 DEF3 GHI4 JKL5 MNO6 PQRS7 i TUV8 E
22. twelve month warranty period whichever is later Exclusions Aastra Telecom Inc does not warranty this terminal to be compatible with the equipment of any particular telephone company This warranty does not extend to 56 Venture 3 Line Telephone User Guide damage to product resulting from improper installation or operation alteration neglect abuse misuse fire or natural causes such as storms or floods after the terminal is in your possession Aastra Telecom shall not be liable for any incidental or consequential damages including but not limited to loss damage or expense directly or indirectly arising from the customer s use or inability to use this product either separately or in combination with other equipment This paragraph however shall not apply to consequential damages for injury to the person in the case of telephones used or bought for use primarily for personal family or household purposes The warranty sets forth the entire liability and obligations of Aastra Telecom Inc and its authorized agents with respect to breach of warranty and the warranties set forth or limited herein are the sole warranties and are in lieu of all other warranties expressed or implied including warranties or fitness for particular purpose and merchantability State law provisions This warranty gives you specific legal rights and you may have other rights which vary from state to state Some states do not allow
23. which you stored the Call timer option To save an option to a memory key Youcan save the Don t disturb Page Room monitor or Call timer options to a memory key This will enable you to turn these options on or off by Venture 3 Line Telephone User Guide 27 pressing the memory key When one of these options is saved to amemory key the light beside it will light when the option is activated 1 Press Options 2 Press repeatedly until the display shows Memory keys prog 3 Press 4 Press repeatedly until the display shows the option you want to save 5 Press v The display shows Press memory key 6 Press the memory key you want to use The display shows Saved Memory key and the name of the option you saved To turn a feature on or off Some telephone service provider features have two codes one to turn the feature on and one to turn the 28 Venture 3 Line Telephone User Guide feature off You must save each code to a separate memory key For each memory key 1 Press Save 2 Pressa memory key 3 Use the dial pad to enter the telephone service provider code to turn the feature on or the code to turn the feature off 4 Save _ Use the dial pad to enter the feature name 6 Press Sav To turn a feature and light on or off The telephone light on your phone can be programmed to turn on or off with one of the telephone service provider features such as
24. Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 4 Do not use this product near water for example near a bath tub wash bowl kitchen sink or laundry tub in a wet basement or near a swimming pool 5 Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product 6 This product should never be placed near or over a radiator or heat register This product should not be placed in a built in installation unless proper ventilation is provided Venture 3 Line Telephone User Guide 53 7 Do not allow anything to rest on the power cord Do not locate this product where the cord will be abused by persons walking on it 8 Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock 9 Never spill liquid of any kind on the product 10 To reduce the risk of electric shock do not disassemble this product but have it sent to a qualified service person when some service or repair work is required 11 Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power supply cord or plug is damaged or frayed B If the product has been exposed to rain water or liquid has been 54 Venture 3 Line Telephone User Guide spilled on the product disconnect
25. ated as follows For North American Markets mains nominal AC voltage 110 117V For Venture Input 117 120V AC 50 60Hz 12W and Output 16VAC 500 mA For International Markets mains nominal AC voltage 220 240V For Venture Input 220 240V AC 50 60Hz 12W and Output 16VAC 500 mA Substitution of non approved equipment will void the Aastra warranty Warranty and repair If you have several telephones and you are having problems with all of them or if your telephone works in some outlets and not in others your problem may originate with the local telephone lines or with central office equipment Contact your telephone company repair service listed in the front of your phone book Should the terminal fail during the twelve month warranty period please return it for repair to the manufacturer or to the authorized agent as specified in the product literature You will be responsible for shipping charges if any and for presenting proof of your telephone s date of purchase If the terminal is covered by a Telephone Company Maintenance Agreement follow the procedure set forth in the Maintenance Agreement for obtaining repair or replacement of the terminal If the terminal is no longer covered by the manufacturer or its authorized agents Warranty and is not covered by a Telephone Company Maintenance Agreement you may return the terminal to the manufacturer or its authorized agents for repair or refurbis
26. bles for each phone line can also be run however there is no advantage in incurring the additional expense W iring the jacks One jack for each telephone is recommended On a standard 6 pin teledapt jack the lines terminate on the tip and ring pins as follows line 1 green and red pins line 2 black and yellow pins line 3 white and blue pins 08 Note Wire color may vary from region to region Connecting the cord adapter module CAM The CAM connects the phone lines and the power adapter to the Venture phone through one 8 wire cord The CAM has three line ports labeled as port 1 port 2 and port 3 e Port 1 provides a connection to Venture lines 1 2 and 3 e Port 2 provides a connection to Venture lines 2 and 3 only e Port 3 provides a connection to Venture line 3 only Venture 3 Line Telephone User Guide 45 The phone port located next to port 1 is used to connect the CAM to the phone The power port located on the top of the CAM is used to connect the CAM through the power adapter to an electrical outlet Two jack examples The following two examples explain how to connect three telephone service provider lines terminated on two jacks to a CAM Other more simple configurations shown only from the jack to the phone are explained in Getting started on page 5 Applying the instructions presented in these two examples should enable you to connect telephone service provider
27. d plug to connect this telephone to the telephone line To connect the telephone press the small plastic tab on the plug at the end of the telephone s line cord Insert into a wall or baseboard jack until it clicks To disconnect press the tab and pull out If a network interface jack is not already installed in your location you can order one from your telephone company Order RJ11W RJ14W for wall mounted telephones or RJI IC RJIAC for desk table use In some states customers are permitted to install their own jacks Venture 3 Line Telephone User Guide 51 Your telephone may not be connected to a party line or coin telephone line Connection to Party Line Service is subject to state tariffs Contact the state public utility commission public service commission or corporation commission for information It is no longer necessary to notify the Telephone Company of your phone s Registration and REN numbers However you must provide this information to the telephone company if they request it If this terminal equipment causes harm to the telephone network the telephone company will notify you in advance that temporary discontinuance of service may be required If advance notice isn t practical the telephone company will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it necessary 52 Venture 3 Line Telephone User G uide The te
28. d this guide and have questions visit our web site at http www aastra com or call 1 800 574 1611 Venture 3 Line Telephone User Guide 41 Action key This key is located in the center of the arrow keys on the right side of your Venture phone It is used to dial anything on your display or to change options Call log This is another name for the Callers list Call Waiting This is a telephone service provider feature to which you can subscribe The phone beeps letting you know that a call is waiting If you also have Calling Line ID the display shows who is calling You can choose to take the second call or to continue with the first call Calling Line ID CLID This is a telephone service provider feature to which you can subscribe It provides information usually the name and phone number of the caller on incoming calls This information is shown on your Venture phone 42 Venture 3 Line Telephone User Guide display and stored in your Callers list Conference calling A three way call between you and callers on two other lines On your Venture phone you can conference two separate phone lines or one phone line and an intercom line Connecting block A plastic block containing metal wiring terminals that connect one group of wires to another Each wire is usually connected to several other wires in a bus an electrical connection that allows two or more wires or lines to be connected together or in a commo
29. d to comply with the limits for a Class B digital device in accordance with the specifications in Part 15 of the FCC rules While these rules are designed to provide reasonable protection there is no guarantee that interference will not occur in a particular installation You can determine whether interference occurs by monitoring your radio or television reception while placing a call If your terminal causes interference one of the following measures may correct the problem Reorient or relocate the receiving TV or radio antenna where this may be done safely To the extent possible move the telephone and the radio or television farther away from each other or connect the telephone and the radio or television to outlets on separate circuits Consult the dealer or an experienced radio television technician for additional suggestions Federal Communications Commission FCC notice FCC registration number This telephone equipment complies with Part 68 Rules and Regulations of the FCC for direct connection to the Public Switched Telephone Network The FCC registration number appears on a sticker affixed to the bottom of the telephone U Note FCC registration does not constitute an expressed or implied guarantee of performance Your connection to the telephone line must comply with these FCC rules Use only an FCC standard RJ11W RJ14W or RJ11C RJ114C network interface jack and FCC compliant line cord an
30. e is connected and the I C key and listen for dial the I C key and listen for dial tone If you hear no dial tone see No dial tone on page 37 Your Phone list When the phone ID and name of each new phone is entered by the owner of that phone this information is automatically added to your Public Directory as part of the Phone list If you have more than one phone in your Venture system you can use the Phone list to call the other phones For more information on using the information in a list see Using the list keys on page 29 Phone list changes When anyone changes the name or ID of any phone in your Phone list the phone list of every phone in your system is automatically updated When you delete a phone or move a phone from one location to another location in your home or office the Phone lists on all phones in your system include the old phone name and ID To delete a phone ID and name from the Phone list see delete information on page 31 Checking the installation When you have installed more than one Venture phone you should verify that all of your phones in your system are communicating 1 Oneach Venture phone press to review each phone in your system as shown in your phone list If the user of phone 01 is named Jane and she is not using the phone the display will show Jane Phone Al idle If Jane is on the phone the word idle will be replaced by bus If neither idle nor bus
31. e system VW used to answer or initiate calls between Venture phones Delete _ erases items from a list or memory key changes an item within the Directory Callers or Services lists or information stored to a memory key stops what you re doing with the phone and clears the display but does not end a call displays the last 10 numbers you dialed Directory stores and provides access to up to 200 names and numbers gt adjusts the receiver speaker and ringer volume Telephone light lights when you have an incoming call message waiting if you have telephone service provider voice mail or message waiting on your telephone line features turned on or when an extension is in use Display gives you instructions and information about calls and features Navigational keys ff 4 enable you to travel through the Options Directory Callers Redial Phone and Services lists They also let you backspace and erase when entering or changing names and numbers in lists In addition pressing the key when your phone is at idle opens the Phone list Action key enables you to dial a number or activate a feature shown on the display Memory keys store information that can be used to make calls or activate features Memory key lights also provide a visual indication when features are activated using a memory key and when another Venture phone is busy when its phone ID is stored to a memory k
32. eceiver work most effectively when set at moderate volume levels To activate Handsfree 1 Press the Handsfree Mute key The Handsfree light turns on and you will hear your caller or dial tone through the Handsfree speaker on your phone 2 Leave or place the handset on the phone To activate Mute 1 When Handsfree is activated press the Handsfree Mute key again The light flashes and the display shows Microrhone muted You can hear the caller but the caller cannot hear you When you want to be heard by the caller again press the Handsfree Mute key again The light stays on Transferring calls You can answer a call and then send or transfer it to another phone in your Venture system To transfer a call 1 When you have answered a call that you want to transfer press Crranster The display shows Transfer to WP 2 Press until the display shows the phone to which you want to transfer the call then press CTranstar or e OR If you have programmed a memory key for the phone that you want to transfer the call to press the memory key I Note If the destination phone is busy the transferred call rings back to the sending phone and the display shows Phone buss Making conference calls You can make a conference call that includes any two phone lines or one phone line and another phone in your Venture system To make a conference call 1 Make call Note If yo
33. ephone User Guide 37 In order to communicate all Venture phones must share the same telephone line as line 1 1 38 Venture 3 Line Telephone User Guide To ensure that the same telephone line is connected to line 1 on all Venture phones you can Press Line f you do not hear dial tone see No dial tone on page 37 f you hear dial tone check every Venture phone the indicator light should be turned on Ifthe Line indicator light is not turned on verify that the jacks are wired correctly and the line cords are connected correctly see Appendix on page 45 Press Goodbye Press For every Venture phone in your system the display should show the Hame assigned to the phone Phone and one of four possible status messages idle the phone is not in use bus the phone is in use owner this is the phone you are using the phones aren t communicating or that phone has been removed from the system Call your phone from any Venture phone that does not appear in the Phone list If the call was placed successfully the phone will now appear in the Phone list Repeat step 3 to verify If all the phones appear in the Phone list call each phone If you don t encounter problems you are finished If your display shows Phone nat rezrFonding or you hear clicking noises see Interference caused by non Venture phones or unused telephone jacks
34. ey Line keys are used to initiate or answer calls on your phone s three lines Handsfree Mute key activates the speaker and microphone so you can listen and talk without lifting the handset or it mutes the microphone Venture 3 Line Telephone User Guide 3 Introduction Unpacking the phone When you unpack the phone you should ensure that you have a Documentation Package a Termination Module Package and all of the parts shown here Venture phone handset handset lens and labels a a 5 T SS memory key lens and 2 labels handset cord 6 wire cords g wire cords power adapter silver black and cord 4 Venture 3 Line Telephone User Guide ER your Venture phone is easy Simply connect your phone lines assemble the phone and follow the instructions on your display If you are installing one phone and all of your phone lines are terminated on one phone jack you can get started by following the instructions on the Quick Start Card If you are installing more than one phone or have lines terminated on more than one jack follow the instructions in this chapter to get started Preparing for the installation Preparing to install your phone includes locating the existing phone jacks in your home or office deciding where you want your phone s located determining how your telephone lines are connected to the jacks you plan to use and deciding how you want the telephone lines to appear on
35. ey 14 27 using a memory key 27 using an autodialer 27 using handsfree 14 using line keys 14 memory key 22 31 35 activate a feature 27 activate an option 27 Callers list information 33 making calls 27 page one phone 27 programming 22 Room monitor 18 setting up 34 transfer using 17 message waiting 36 microphone Handsfree 16 monitor a room 18 more than one line ringing 15 mute 16 Mute activate 16 name a Private Directory 32 Aastra help desk 25 41 options reset 24 setting 20 other equipment 7 overrides 24 P page Venture 3 Line Telephone User Guide 59 on memory key 22 one phone 18 one phone using a memory key 27 receiving 21 page all 27 password 22 delete 24 phone busy 14 programming 20 phone busy 17 phone ID 12 13 24 phone jacks 5 Phone list 29 31 34 using 13 34 phone name 24 Phone not responding 14 phone numbers automatically sent 22 PINs 22 power adaptor cord 11 powering up your phone 12 60 Venture 3 Line Telephone User Guide Prime line 22 prime line 22 Private Directories 34 Private Directory name 32 private numbers 22 Public Directory 34 Q Quick Start Card 5 R Receive page 21 receiver volume 16 Redial list 29 34 repairs 41 repeat caller 23 reserve line 14 reset options 24 Restrictions 23 retrieve a list item 29 ring tone choosing 24 Ringer is OFF 36 Room monitor 18 21 27 activate 18 memory key 18 on a memory key 22 set up 18 running cable
36. fied equipment This certification means that the equipment meets certain telecommunications network protective operational and safety requirements The Department does not guarantee the equipment will operate to the user s satisfaction Before installing this equipment users should ensure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection The method of connection approved for this equipment as designated by D O C Standard CS 03 is a 11 14 or CA11W CA14W connection arrangement The A or W suffix indicates that either desk or wall mounting is approved In some cases the company s inside wiring associated with a single line individual service may be extended by means of a certified jack plug cord ensemble telephone extension cord The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations Existing telecommunications company requirements do not permit their equipment to be connected to customer provided jacks except where specified by individual telecommunications company tariffs Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecom
37. figuration shown in the following three examples is like your configuration One or more lines one phone jack on page 8 Two lines two phone jacks on page 9 Two lines two phone jacks on page 9 IS Note For more complex configurations see Appendix on page 45 Connect the cords to the cord adapter module CAM and to the phone as shown in the example you identified in step 6 057 Note The CAM is a cord management device that connects the telephone lines and Venture 3 Line Telephone User Guide 7 One or more lines one phone jack 1 Plug one end of a silver 6 wire cord into the phone jack and the other end into port of the CAM Plug one end of a black 8 wire cord into the phone port of the CAM run the cord through the stand and plug the other end into the CAM port on the back of phone Plug the power adapter cord into the power adapter port on the top of the CAM and the other end into an electrical outlet 8 Venture 3 Line Telephone User Guide line 1 line 2 line 3 D 9 UN Two lines two phone jacks 1 Plug one end of a silver 6 wire cord to the line 1 phone jack and the other end to port 1 on the CAM Plug one end of another silver 6 wire cord to the line 2 phone jack and the other end to port 2 on the CAM Plug one end of a black 8 wire cord into the phone port of the CAM run the cord through the stand and plug the othe
38. hment You will be billed for any repairs Repair to this equipment can only be made by Aastra Telecom Inc and its authorized agents and by others who may be authorized by the FCC Questions about the warranty or requests for the manufacturer s policy and procedure on repair and refurbishment should be directed to the manufacturer or authorized agent as specified in the product literature Manufacturer s limited twelve month warranty Coverage The manufacturer warrants this terminal against defects and malfunctions for a period of twelve months from the date of original purchase If there is a defect or malfunction Aastra Telecom Inc or its authorized agents will at its option and as the exclusive remedy either repair or replace the terminal at Venture 3 Line Telephone User Guide 55 no charge if returned within the warranty period If replacement parts are used during repair these parts may be refurbished or may contain refurbished materials If it is necessary to replace the terminal it may be replaced with a refurbished terminal of the same design and color If it should become necessary to repair or replace a defective or malfunctioning terminal set under this warranty the provisions of this warranty shall apply to the repaired or replaced terminal until the expiration of ninety 90 days from the date of pick up or the date of shipment to you of the repaired or replacement set or until the end of the original
39. incoming call will set the time and date automatically manual Enables you to manually set the time and date on the display If you subscribe to Call ing Line ID your first incoming call will reset the time and date 28 Language choice Enalish Enables you to change the language used on the display to English French or Span French Seanish ish 29 Versions Displays the software versions used by your phone This information is necessary when calling a telephone service provider or the Nortel help desk System test Key test LCD test LED test When each key is pressed this test displays a number to indicate that the key is func tioning Fifteen seconds after you stop pressing keys this test will automatically end The display is filled to show that each inforrration display area is functioning Illuminates the lights on the phone to show that they are working Venture 3 Line Telephone User Guide 25 of the eight memory keys can be used to store a phone number phone ID telephone service provider feature or Venture option for quick and direct access You can make calls page other Venture phones and activate features using these keys To save information 05 Note If the information you want to save is in one of your Venture lists retrieve the item first See To retrieve an item on page 29 1 Press Save Your display will show Save to Note
40. ion is set for each line on your phone 16 Rereat caller Combine calls Serarate calls This is available when you subscribe to Calling Line ID from your telephone service provider The information for the same caller is displayed once and the number of times they called is listed beside it This is available when you subscribe to Calling Line ID from your telephone service provider The information for each call is listed separately regardless of how many times the sare caller calls 17 Area codes Prevents selected area code information received from incoming calls from being dialed from your phone The selected area codes will appear in parentheses on the display when incoming call information is viewed You can select up to three 3 to 7 digit area codes 18 Restrictions Stops certain numbers such as 1 900 555 3333 or numbers beginning with certain digits such as long distance calls starting with O or 1 from being called from your phone You can restrict up to five 12 digit nurrbers Venture 3 Line Telephone User Guide 23 Options chart Number and Option Settings default Option function 19 Overrides Ring tone 4 2 32 Allows nurrbers that have been restricted through O ption 18 to be called from your phone For exarrple if you have restricted long distance calls beginning with 1 or O from being dialed you can allow 1 800 calls to go through You can override
41. is in the lab and has access to lines 555 4443 and 555 4447 through two jacks The user s name is Dave Venture 3 Line Telephone User Guide 5 Installation planning worksheet example Phone ID Name 01 Michael Line 1 Jack 555 4443 jack 1 Line 2 Jack 555 4444 jack 1 Line 3 Jack 555 4445 jack 1 reception 02 Gord 555 4443 jack 1 555 4444 jack 1 555 4446 jack 1 service 03 Dave 555 4443 jack 1 Installation planning worksheet Phone ID Name Line 1 Jack 555 4447 jack 2 Line 2 Jack Line 3 Jack lab Location 08 Note The same telephone line must be used as line 1 on every phone in your system so that the phones can communicate with each other 6 Venture 3 Line Telephone User G uide the phone Plug one end of the handset cord into the handset 2 Plug the other end of the handset cord into the handset port on the back of your phone 3 Press the cord into the channel provided 4 If the phone will be mounted on a wall skip to Installing a phone on a wall on page 11 5 Disconnect all other equipment such as phones or faxes that share the phone lines used in the Venture system This equipment will be reconnected after the installation of your Venture phones See step 2 on page 13 the power adapter to the phone through one cord Determine which telephone line con
42. lephone company may make changes in its facilities equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advance notice in order for you to make necessary modification to maintain uninterrupted service Do not attempt to repair this equipment yourself If trouble is experienced with this equipment for repair or warranty information please contact 1 800 574 1611 or write to Aastra Telecom 155 Snow Blvd Concord Ontario L4K 4N9 If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved Signaling method The unit s push key dial allows it to signal in tones DTMF It can complete calls to local and long distance lines and can also complete long distance calls via computer phone systems such as MCI or SPRINT Ringer Equivalence Number The FCC Registration label on bottom of phone includes a Ringer Equivalence Number REN which is used to determine the number of devices you may connect to your phone line A high total REN may prevent phones from ringing in response to an incoming call and may make placing calls difficult In most areas a total REN of 5 should permit normal phone operation To determine the total REN allowed on your telephone line consult your local telephone company Hearing aids The telephone is compatible with
43. lines from the connecting blocks in a building to the CAM for any configuration If you require more information call 1 800 574 1611 46 Venture 3 Line Telephone User Guide Line 1 on a separate jack and lines 2 and 3 on one jack 1 Connect line 1 to the red and green pins of the first teledapt jack Connect one end of a 6 wire cord to the first teledapt jack and the other end to port 1 on the CAM Connect line 2 to the red and green pins of the second teledapt jack Connect line 3 to the black and yellow pins of the second teledapt jack Connect one end of the 6 wire cord to the second teledapt jack and the other end to port 2 on the CAM connecting block Venture 3 Line Telephone User Guide 47 Lines 1 and 2 on one jack and line 3 on a separate jack 1 Connect phone line 1 to the red and green pins of the first connecting block teledapt jack 2 Connect phone line 2 to the black and yellow pins of the first teledapt jack 3 Connect one end of the 6 wire cord to the first teledapt jack and the other end to port 1 on the CAM 4 Connect line 3 to the red and green pins of the second teledapt jack 5 Connect one end of the 6 wire cord to the second teledapt jack and the other end of the line cord to port 3 on the CAM 48 Venture 3 Line Telephone User Guide Canadian regulatory information Industry Canada Notice The Industry Canada label identifies certi
44. munications company cause to request the user to disconnect the equipment Users should ensure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas CAUTION Users should not attempt to make electrical ground connections themselves but should contact the appropriate electric inspection authority or electrician as appropriate NOTICE The Load Number LN assigned to each terminal device denotes the percentage of the total load to be connected to a telephone loop which is used by the device to prevent overloading The termination Venture 3 Line Telephone User Guide 49 of a loop may consist of any combination of devices subject only to the requirement that the sum of the LN of all the devices does not exceed 100 This telephone has been tested and found to comply with the limits for a Class B digital device in accordance with the Canadian EMI requirement ICES 003 CAUTION To eliminate the possibility of accidental damage to cords plugs jacks and the telephone do not use sharp instruments during the assembly procedures WARNING Do not insert the plug at the free end of the receiver cord directly into a wall or baseboard jack Such misuse can result in unsafe sound levels 50 Venture 3 Line Telephone User Guide The exclama
45. n arrangement Daisychain A method of connecting devices in a series The phone signal is passed through the chain from one device to the next Differentiated ring This is a telephone service provider feature to which you can subscribe It enables you to have a second phone number with a unique ring on a single phone line Display prompts Instructions shown on your display Flash This Venture feature works like a break in the phone line connection For example if you subscribe to Call Waiting or Calling Line ID from your telephone service provider when you are on a call and second call comes in on the same line you can press to answer the other call Home run Star Phone system wiring in which the individual cables run from each phone to a connecting block where your phone lines are brought into your building KSU less systems Systems like Venture that include only phones directly linked to each other so that they can call each other and share information and lines Lists Information storage areas from which information can be used to place calls and activate features Lock lists A security feature that prevents unauthorized users from deleting or changing items in lists such as your Directory or Callers list Memory key Eight memory keys are located on the lower right side of your Venture phone When programmed with a number a memory key enables you to dial frequently called numbers by pressing the
46. nformation in either one of your Directories or the main list Entries saved to each Directory that includes only a phone number are listed first in the Directory and are sorted by first digit For example 555 4111 appears before 555 8989 Entries that include a name and a number are listed after the numeric listings and are sorted by name alphabetically The number of items in a shared Public Directory affects the number of items that can be stored in the three Private Directories of each phone in the system For example if the Public Directory has 50 items in it each user has 150 spaces for use in Private Directories The Services list can store the feature codes and names of up to 20 telephone service provider features such as Call Forward or Call Return Telephone service provider features are offered by subscription or on a pay per use basis For more information about features offered in your area contact your telephone service provider Venture 3 Line Telephone User Guide 35 TIE following status messages may be displayed when the handset is on hook If you have more than one status message you can view additional messages using When you clear one status message from the display the next one appears Status message descriptions Check line cord A line cord may be damaged not plugged in or otherwise disabled Corina directory The Public Directory in the existing Venture system is being co
47. ng Termination module An Aastra solution to problems that sometimes occur when analog phones share lines with phones in any KSU less system Venture 3 Line Telephone User Guide 43 Tip and ring The pair of wires provided for each telephone line from the telephone service provider s central office Twisted pair Two insulated copper wires twisted around each other to reduce interference 44 Venture 3 Line Telephone User Guide appendix is intended for use by installers or individuals with system wiring experience It provides in depth information required to complete the wiring of a Venture system from the connecting blocks through the jacks and the Venture cord adapter module CAM to a Venture phone It also provides information relevant to new installations and previously wired facilities Running cable to phone jacks The following factors should be considered when new wiring is required for new installations or to provide additional phone lines e same telephone service provider line must appear as line 1 on each phone so that the phones in the system can communicate e Three or more twisted pair cable is recommended Running cable from the connecting blocks to each telephone a home run configuration is recommended Running a cable from one phone to the next a daisychain configuration is also supported although it may cause more work if the system is modified later Individual ca
48. o the Directory or to a memory key The Callers list records call information for up to 200 incoming calls provided by the telephone 34 Venture 3 Line Telephone User Guide service provider when you subscribe to Calling Line ID The Callers list can be set to record information on all calls unanswered calls or no calls In addition call information can be grouped so that a caller s name appears only once with the number of times he or she tried to reach you or so that each call is listed separately The Callers list consists of a main list which includes all call information stored and four sublists one for each telephone line in your system and one for the intercom line If a line is shared with other phones the Callers list for that line appears on every phone with that line If you do not subscribe to Calling Line ID and Callers list is activated only internal calls will be logged The Directory stores up to 200 numbers and names The Directory includes five sections a main list which includes all shared and private directory information for this phone the Public Directory which includes all phones in your system and all numbers shared by all telephones in the system and three Private Directories which are unique to each phone Each Private directory can be named and each Directory indicates how many items it currently contains You can save information directly to any of your Directories and view i
49. ogrammed on a memory key or in the Directory the Callers list displays the name as listed in the Directory or on the memory key The second line shows the type of call the phone number of the caller and if you have returned the call Type of call icons You answered this incoming call You did not answer this incoming call C You were on another call when this call came in on the line you were using The third line indicates if the call displayed is new the date and time of the most recent call whether the call was long distance and how many times the caller has called Icons on the third line N The call is new 5552 The call is long distance The caller called four times To delete a Callers list 1 Press Callers 2 Press twice Venture 3 Line Telephone User Guide 33 List descriptions The Phone list includes the phone ID and name of each phone in a Venture system As new Venture phones are added to your system this information is automatically added to your Phone list The information in the Phone list is stored in your Public Directory The Phone list can also be accessed by pressing amp when the phone is not in use The Redial list stores the last 10 numbers you have dialed from your phone It also stores the time each call was made and the duration of the call Numbers in the Redial list can be modified for use in dialing however changed numbers can only be saved int
50. on page 38 Interference caused by non Venture phones or unused telephone jacks Some non Venture equipment connected to the telephone line that is used as line 1 on your Venture system can cause interference Follow these steps to eliminate those problems Following the installation instructions included with the termination module plug a termination module into every phone jack in your home or office that is not used for a Venture phone ES Note Do not plug your Venture phones into a termination module 08 Note If you require more termination modules than those supplied with your phones call 1 800 574 1611 to order additional modules Duplicate ID is displayed for unexplained reason 1 Press Options 2 Enter 23 The display shows Phone Id WP next chang Press Enter your two digit ID Press gv pao 23 79 If the display shows Duplicate ID again repeat steps 1 to 5 using a different number You can t hear Use to adjust the volume of the handset the Handsfree speaker or both You forgot your password You can t enter the Options list because you have forgotten the password 1 Press Options The display reads Please enter passwordb 2 Enter the month date and hour in 24 hour format displayed on the phone If your phone is displaying FEB 21 3 45pm the password would be 02211545 3 Press repeatedly until your display shows 21 Password
51. ormation Press the memory key 2 Press twice Note If your display shows Ke is locked see option 22 Lock lists on page 24 05 Note You cannot delete an option saved to a memory key To reuse the memory key save new information over the option To make a call using a memory key 1 Lift the handset or press the Handsfree key 2 Press the memory key for the number that you want to call Note When phone ID is stored to a memory key the light for that memory key lights when that phone is already in use To activate an option or feature using a memory key e Press the memory key which the option or feature that you want is stored The option is activated and the memory key light is on Note When you have saved Call timer to a memory key you can display the duration of a call while it is in progress To page one phone Press the memory key for the Venture ID number you want to call for two seconds 2 Wait for the tone to end 3 Speak into the handset or the Handsfree microphone 4 Hang up or press Goodbye_ to end the page session To view call duration information When you use the Call timer option to time calls the call duration information on the last 10 calls you made is stored in the Redial list 1 Press 2 Press repeatedly until the display shows the list item you want to see 3 Press the memory key to
52. per connections have been made to the CAM 2 certain that you have an 8 wire cord connected from the CAM to your Venture phone Display language error 1 Press Options 2 Press28 3 4 Press repeatedly until your display shows the language you want 5 No dial tone 1 Check the connections of line cords from the phone jack to the CAM and from the CAM to your Venture phone 2 Ensure that working telephone lines are connected to the wall jack s 3 If you have a dial tone on the handset but not when you are using the Handsfree speaker turn off the headset using option 05 If Headset is on the Handsfree speaker is disabled 4 If you have dial tone on the Handsfree speaker but not when you are using the handset ensure that the handset cord is firmly plugged into the handset and the handset jack on the back of your phone Communication problems You have more than one Venture phone linked together and you experience any of the following e Other phones do not appear on your phone list e Your display shows as the status of other phones in your system e Public directory information is not shared e You experience difficulty calling other Venture phones Your display shows Phone not responding when you try to place an intercom call or page other phones e You hear clicking noises when calling other Venture phones Venture 3 Line Tel
53. pied to this phone Dort disturb The Don t disturb option is on and your phone will not ring aloud for incoming calls 36 Venture 3 Line Telephone User G uide Feature OH When you program Feature On to your Services list or to a memory key this message reminds you that a telephone service provider feature such as Call Forward has been activated Line x Reserved This message means that you have reserved line 1 2 or 3 Message Waiting on line If you subscribe to voice message services from your telephone service provider your phone display indicates when you have a message waiting and on which line the message is stored xxx Mew Callers Indicates the number of new callers that have been added to your Callers list since you last reviewed it Heu Phones gt Indicates the number of new phones that have been added to your Venture system xx Heu Services Indicates the number of new services that have been added to your Services list Ringer is OFF The ringer for a line or intercom is turned off on your phone xx Calls Bumped Indicates the number of calls that have been dropped from your Callers List is designed to help you overcome difficulties that may occur when installing and using anew Venture 3 line phone Blank display Your display is blank and the lights on your phone are not working 1 Check that the power adapter is plugged into a working power outlet and that pro
54. r Call Waiting ID feature you can answer a second incoming call on a line that is already in use When a second call comes in you hear a tone in the receiver of your phone If you have Call Waiting ID the caller information appears automatically on your display e Ifyou want to interrupt your current call to answer this new call press Flash You are connected to the second call and your first call is on hold 057 Note You can switch back and forth between the two calls by pressing Flash Venture 3 Line Telephone User Guide 15 Adjusting the receiver volume While making or receiving calls you may want to adjust the volume of the Handsfree speaker or handset receiver e Press the right side of to increase the volume level OR e Press the left side of to reduce the volume level Note If you want to change the volume of the handset receiver permanently see Option 14 Hnidset deflt on page 23 Using the Handsfree and M ute features during calls When making or receiving calls you can use the Handsfree speaker and microphone instead of the handset 16 Venture 3 Line Telephone User Guide When Handsfree is activated you can speak and be heard on a call without lifting the handset When you are on a Handsfree call you can activate Mute so that you can talk privately to someone else in the room without the caller hearing you 05 Note The Handsfree speaker and r
55. r end into the CAM port on the back of the phone Plugthe power adapter cord into the power adapter port on the top of the CAM and the other end into an electrical outlet Venture 3 Line Telephone User Guide 9 Three lines three phone jacks 1 Connect one end of a silver 6 wire cord to the line 1 phone linel line2 line3 jack and the other end to port 1 on the CAM 2 Connect one end of another silver 6 wire cord to the line 2 phone jack and the other end to port 2 on the CAM 3 Connect one end of another silver 6 wire cord to the line 3 phone jack and the other end to port 3 on the CAM 4 Plug one end of a black 8 wire cord into the phone port on the CAM run the cord through the stand and plug the other end into the CAM port on the back of the phone 5 Plug the power adapter cord into the power adapter port on the top of the CAM and the other end into an electrical outlet 10 Venture 3 Line Telephone User Guide ai the stand Align the tabs on the edge of the stand with the holes on the back of the phone 05 Note You can adjust the phone to sit at a higher or lower angle by choosing between the two sets of holes on the stand A UJ gt Y lt y N 5 I B B 2 Lower the tabs into the holes that you have chosen 3 Push the stand against the phone until the side tabs click into the locking holes
56. ress memory key 6 Press the memory key you want to use The display shows Saved Memory key Room Monitor To activate Room monitor 1 Goto the monitoring phone Room monitor Transmitter Venture 3 Line Telephone User Guide 19 Your Venture phone is programmed to operate as simply as possible As you begin using your phone you may decide that you want to change the way your phone operates You can do this by setting the options in the Option list 05 Note In addition to programming your options you can also program the way your phone operates by setting up your memory keys and lists see Using the memory keys on page 26 or Using the list keys on page 29 To set an option 1 Press Options 2 Press repeatedly until your display shows the option you want to set or Use the dial pad to enter the two digit option number 3 Follow the display prompts to select the setting you prefer The following table explains each option that you can set Options are listed in the order in which they appear in the Options list The first column shows the option number and name The second column shows the possible settings for each option An indicates the default setting of an option The last column explains how the settings for each option affects the way your phone works Options chart Number and Option ettings Option function default 01 Don t dsturb OFF Allows the phone to ring for internal
57. s Save 3 Press turn the light on or to turn the light off The display shows Save feature ON or off to 4 Press CServices 5 Use the dial pad to enter the telephone service provider code to turn the feature on or the code to turn the feature off 6 Press Save The display shows Press 1st letter to enter a name 7 Use the dial pad to enter the feature name 8 Press Save _ The display shows Saved Services and the name of the feature To name a Private Directory 1 Press Directory 2 Press to locate the Private Directory Directory A B or C 3 Press C Change 4 Enter the name See step 5 in To save information on page 30 5 Press Sav To delete a Directory 1 Press Options 2 Press repeatedly until the display shows 25 Directory Erase 3 Follow the display prompts To set up your Callers lists To control the type of call information you want to record and the way it is recorded in your Callers list see Option 15 Callers log page 23 and Option 16 Repeat caller on page 23 Callers list display information When you subscribe to Calling Line Identification from your telephone service provider when your phone rings your display looks like this The first line shows the list number 001 to 200 and the name of the caller 05 Note If the phone number of a call received matches one that you have pr
58. sing your Venture phone is available in this user guide Venture 3 Line Telephone User Guide 1 Your Venture phone Flash Goodbye telephone light 2 navigational keys display action key A SST S7 Il Transf C 7 ilm Gare p Handsfree speaker 3 line keys with indicator lights Handsfree M ute key with indicator light volume bar 8 memory keys with Ve indicator lights 5 intercom 2 Venture 3 Line Telephone User Guide Key descriptions put calls on hold and releases calls from hold or Link connects you to telephone service provider features such as Three way Calling Goodbye always ends an active call lets you access the Options list to customize your Venture phone lets you access information on the last 200 callers when they called and how many times they called when you subscribe to calling line identification from your telephone service provider lets you have easy access to a list you create for services your phone service provider provides such as Call Forward stores numbers and names in the Directory the Services list or a memory key It may also be used to activate or deactivate an option while in the Options list transfers a call from your Venture phone to another Venture phone in your system Conference creates and controls a conference call using the other lines or other phones in your Ventur
59. the exclusion of incidental or consequential damages or allow limitation on implied warranties or their duration so that above exclusions or limitations may not apply A access codes 22 activate a feature using a memory key 27 an option using a memory key 27 feature using a list 29 Handsfree 16 Mute 16 Room monitor 18 allowing calls to restricted numbers 24 answer line 22 answering calls 15 area codes prevent display 23 assembling the phone 7 automatically generated lists 34 Call timer 21 27 on a memory key 22 Call Waiting 15 23 Callers list 29 34 delete a list 33 Directory 33 memory key 33 set up 33 Callers log 23 Calling Line ID 15 25 34 calls logged all unanswered none 23 CAM connecting 45 Canadian regulatory information 49 change disable key 24 change language selected 25 check line cord 36 cleaning the display 41 Clear Msg Wtg 22 conference calls 17 dialing 14 connecting cord adapter module CAM 45 handset 7 line one on a separate jack and lines two and three on one jack 47 lines 1 and 2 on one jack and line 3 on a separate jack 48 one or more lines one phone jack 8 three lines three phone jacks 10 two lines two phone jacks 9 contrast increase or decrease 21 cord short 11 D daisychain 45 date setting 25 Venture 3 Line Telephone User Guide 57 delete a Callers list 33 a Directory 33 disable key 24 list information 27 31 dial tone headset 21 dialing
60. tion point within an equilateral trian gle is intended to alert the user to the presence of important operating and maintenance serving instruction in the literature accompanying the prod uct A This symbol on the product is also used to identify the following important information Shock Hazard W arning To avoid potential electrical shock hazard to personnel or damage to the telephone use only the manufacturer supplied equipment and installation procedures Specifically use only 6 conductor modular Teladapt plug cords with this product and the AC transformer must be CSA UL or CSA NRTL C approved Class 2 level C rated as follows For North American Markets mains nominal AC voltage 110 117V For Venture Input 117 120VAC 50 60Hz 12W and Output 16VAC 500 mA For International Markets mains nominal AC voltage 220 240V For Venture Input 220 240V AC 50 60Hz 12W and Output 16VAC 500 mA Substitution of non approved equipment will void the Aastra warranty For address for warranty and repairs in Canada Please call Aastra Telecom at 1 800 574 1611 U S regulatory information Radio TV interference Terminals equipped with electronic push key dials generate and use radio frequency energy and if not installed and used properly and in strict accordance with the manufacturer s instructions may cause interference to radio and television reception These terminals have been tested and foun
61. to the jacks 45 S save disable 24 save information to Directory 26 30 31 to Services list 26 30 31 second call answering 15 display information 15 secure number 22 select line key 17 send number automatic 22 separate calls 23 Services list 29 35 feature light on off 28 32 setting up 34 set the time and date 25 setting up Callers lists 33 Directory 34 memory keys 34 Services list 34 speaker Handsfree 16 stand angle adjustment 11 attaching 11 status messages 36 stopping calls 23 System is busy 14 T telephone company features 35 Telephone light 20 28 32 telephone light 32 time setting 25 Time date 25 timing calls 21 Transfer 16 troubleshooting 37 turn on a feature and light 28 32 twisted pair cable 45 type of call Callers list information 33 icons 33 types of rings 24 U U S regulatory information 51 using the lists 29 V version of software 25 volume adjusting 16 wall mount 11 warranty 41 wiring 5 7 phone jacks 45 Venture 3 Line Telephone User Guide 61
62. u press without placing your calls first the display shows Make calls first Press Ho Make your second call Press Note If you have more than two lines on hold or connected the display shows Select line keu Press the line keys you want to include in your conference call Press Goodbye to end the call Note When you hang up everyone on the call is disconnected To put a conference call on hold 1 Press Hold All the conferenced lines are put on hold I Note When a conference call is on hold the conferees cannot speak to each other To reestablish the call press Conference To consult privately during a conference call 1 Press the line key for the person with whom you want to speak privately The other line will automatically be put on hold 2 reestablish the conference call press Conference Paging all phones Hold down C_ __ for two seconds The page tone is heard on all phones in the system unless they are in use 2 Wait for the tone to end 3 Speak into the handset or Handsfree microphone 4 Hang up or press to end the page Paging one phone 1 Press repeatedly until the display shows the phone you Venture 3 Line Telephone User Guide 17 2 Wait for the tone to end 3 Speak into the handset or Handsfree microphone 4 Hang up or press to end the page Paging one phone 1 Press
63. up to five 12 digit numbers Enables you to select one of four styles of rings for each telephone line and intercom line on your phone 21 Password Creates an up to four digit password that must then be used to view or modify the settings in the Options list To delete a password delete the numbers used If you for get your password see You forgot your password on page 39 22 Lock lists 0H OFF Disables the save delete and change keys so that no one can change or delete the contents of a list or memory key You can still erase all items in a Directory using Op tion 25 Allows the contents of a list or memory key to be changed or deleted 23 Phone ID Enables you to change the two digit number used to identify your phone to the system or to dial your phone from other phones in the system 24 Phone name Enables you to change the name used to identify a Venture phone in the Phone list 25 Directors Enables you to erase all items in either the Public Directory or one of the three Private Directories This can be done even when O ption 22 Lock lists is on 26 Reset options Enables you to reset all the options on your phone to the factory settings 24 Venture 3 Line Telephone User Guide Options chart Number and Option Settings default Option function 27 Time Date autorratic If you subscribe to Calling Line ID from your telephone service provider your first
64. urn off the message waiting light on page 39 11 Prime iz Line 1 tLine 2 or 32 Ho Prime line Sets up a line to be automatically selected each time you pick up the handset or press the Handsfree Mute key You can select line 1 2 or 3 for your Prime line If you do not choose a Prime line you will have to select a line to complete a call 12 Answer line Answer Prime Answer Longest The Prime line is automatically selected when more than one line is ringing at the sarre time and you pick up the handset or press Handsfree without selecting a line The line that has been ringing the longest is automatically answered when more than one line is ringing at the sarre time 13 Live dialead ON OFF The numbers entered using the dial pad are automatically sent on the Prime line to make a call The numbers entered using the dial pad are displayed You must manually select a line to make the call 22 Venture 3 Line Telephone User Guide Options chart Number and Option Settings defaul Option function 14 Hnedlzet deflt OH When you change your phone s handset volume while you are on a call the change lasts for the duration of that call only OFF When you change your phone s handset volume while you are on a call the volume change is saved 15 Callers log All calls All calls are logged Unanswered calls Ho calls Unanswered calls are logged No calls are logged This opt
65. y shows see Communication problems on page 37 2 Reconnect any non Venture equipment that shares the telephone lines used by your Venture phones This equipment was disconnected before the installation of your Venture phones See step 5 on page 7 3 Repeat step 1 W hat s next At this point if you want to e begin making calls see Making and receiving calls on page Left program your options such as Don t disturb or Receive page see Programming your phone on page 20 e learn more about or program your memory keys see Using the memory keys on page 26 e learn more about or program your Venture lists see Using the list keys on page 29 Venture 3 Line Telephone User Guide 13 Making and receiving calls make and receive calls using many different methods transfer calls reserve lines and use features while making or on a call Dialing calls When you make a call you can select a line by pressing one of the line keys on your phone or if you have selected a prime line See 11 Prime is on page 22 and have live dial pad activated See 13 Live dialpad on page 22 your call is automatically placed as soon as the phone number is on the display To make a phone call 1 Pick up the handset or press or the Handsfree Mute key F Note If you select a line that is already in use to prevent accidental intrusions on ongoing nm your Venture phone you can
66. your phone 20 Set an s 20 Using the memory 26 SAYS TBEOTIAL OT coerente dae dr oe vcr Erebi pene Aves 26 To change informations s enr ee eee eise es 26 To delete AnformalttOI 27 To make a call using a memory key 27 To activate an option or feature using a memory 27 TG pase 27 To view call duration information 27 To save an option to a memory 27 To turn feature on OPE uie nore nete 28 To turn a feature and light on or off 28 Using the list keys TT To e ot tione 29 To make a call or activate a feature 29 To change informatiot 29 TG SAVE information aca sedo iae heit 30 ii Venture 3 Line Telephone User Guide To save information from another list or a memory key 31 To delete information eto rer eT 31 To turn a feature on or off in the Services list 32 To turn a feature and light on or 32 To name a Private Directory eene 32 To delete a Directory eaaet 33 To set up your Callers lists a eked 33 Callers list display information esee 33 To delete a
67. your phone s The same telephone line must appear as line one on all of your Venture phones If you cannot tell in what order your telephone lines are terminated on the jacks you plan to use call your telephone service provider to assist you There should be an electrical outlet within 10 feet of where you locate your phone In addition if you are installing more than one Venture phone there should be no more than 500 feet of wire connecting any two phones in the system In a building with existing wiring you may find phone lines terminated on one two or three phone jacks If you are installing new wiring and phone jacks see Appendix on page 45 Installation planning worksheet Use the worksheet on page 6 to determine how to set up your system In column one fill in the unique two digit phone ID and the name that will identify the phone on the system In columns two three and four record the phone number and the jack on which it appears for Venture line 1 2 or 3 In column five record the room or area where the phone will be located Installation planning worksheet Example Your first phone is located in the reception area and has access to telephone lines 555 4443 555 4444 and 555 4445 through one jack The user s name is Michael The second phone is located in the service area and has access to telephone lines 555 4443 555 4444 and 555 4446 through one jack The user s name is Gord The third line

User Manual 3-Line

Contents

Download Pdf Manuals

Related Search

Related Contents