MEITRACK MT90A User Guide
Contents
1. MEITRACK MT90A User Guide eee MT90A User Guide In standby mode press and hold down the button for 2s when the buzzer sounds BI once the recorder will run automatically The MT90A will record the route every 30s automatically when a GPS signal can be received Route records can be exported by using a computer Press and hold down the button for 2s again when the buzzer sounds BI twice and the recorder will stop automatically Note To avoid misoperations you can disable the GPS Log button by using Meitrack Manager default valid Volume GPRS Press the button to turn down the volume button In standby mode press and hold down the button for 2s when the buzzer sounds BI once the GPRS function will be enabled automatically Precondition GPRS parameters are set and the default GPRS message interval is 10 minutes Press and hold down the button for 2s again when the buzzer sounds BI twice the GPRS function will be disabled automatically Note To avoid misoperations you can disable the GPRS button by using Meitrack Manager default invalid Lanyard hole Place the lanyard through the hole Battery cover After removing the battery cover install the battery and SIM card 5 2 Indicator To start the MT9OA press and hold down the power button for 3 to 5 seconds The blue and green indicators blink on for 1s and blink off for 1s simultaneously Status Descrip2. microwave ovens ovens or radiators Batteries may explode when overheated Copyright 2014 Meitrack Group All rights reserved 14 Q meitrack MEITRACK MT90A User Guide 11 Battery Disposal Waste Electrical and Electronic Equipment Directive Applicable in European Union and other European countries with separate battery return system This symbol in the manual indicates that this product and its accessories such as chargers batteries and the USB cable cannot be disposed of with other household wastes when they reach the end of their life If batteries are not properly disposed of these wastes may cause harm to human health and the environment To prevent the harm please dispose of or recycle them separately from other waste so as to boost resource recycling and reuse If you have any questions send an email to info meitrack com Copyright 2014 Meitrack Group All rights reserved 15
3. 500000000 13600000000 13700000000 Responding 353358017784062 A71 0K To clear all function numbers send 0000 A71 If this function cannot be achieved please add your Country and Area Code before your phone number when you set the preauthorized phone numbers or consult your local mobile operator Copyright 2014 Meitrack Group All rights reserved 11 2 meitrack MEITRACK MT90A User Guide 7 3 Listen in A72 The command is used to listen in to the surrounding environment After the setting the device is allowed to confidentially and automatically answer a phone and enters listen in state for one way communication Note If Auto Answer Incoming Call and Monitor are set for a same phone number only Auto Answer Incoming Call takes effect To implement the listen in function do not set Auto Answer Incoming Call for the phone number or clear all function numbers by sending 0000 A71 SMS text 0000 A72 Monitor number 1 Monitor number 2 Send the text to the embedded SIM card phone number The MT90A automatically replies to the SMS IMEI A72 OK It indiates that the listen in number is set successfully When the preset monitor number calls the MT90A the MT90A will answer the call automatically and enter the listen in state Meanwhile the device will not make any noise Note Phone number A maximum of two monitor numbers can be set and each phone number contains 16 digits at most If only one monitor number is set the number mu
4. Q meitrack MEITRACK MT90A User Guide MEITRACK MT90A User Guide Q meitrack MEITRACK MT90A User Guide Change History Project MT90A Creation Date 2011 05 16 Update Date 2014 09 02 Copyright 2014 Meitrack Group All rights reserved 2 2 meitrack MEITRACK MT90A User Guide Contents deele 4 SEN NER ANNE EEE SEE EEE ENG EIER eebe 4 3 Product Function ANG SPeCINCAUIONS geet EE 4 SEET 4 DN e ge MACKINE ee a ae nn ode 4 3 1 2 Emergency Alarm 4 3 1 ORE FONCION S aise ice ecient een een tenancies Oise dered nen cme do ea es de ren died ot 4 3 2 SS CUA UNS ca sets tcc te seat cian greece ee seins ee Re ee een 5 IMPACT ee D R 5 PROUT CS ER 6 ell ne nl 6 El AO EE 7 MNS BE 8 7 Quick Operation Commande 9 7 1 Real time Location MAOINE eegene 9 Dia OS lee T E 11 Fr MN E 12 7 4 Smart Sleep A773 ccccccccsssscccceeseeccceeecceceueeceeesasseeeeseseeeeeseaeeeeeeeeeceeseeeeeeseeseeeeseaseceesaaeeceesaeaeceesueascessaeeeceesaaseceesauaeseesages 12 PAu Sen a E E E A A A A E A A E E E A A E A E A A 13 76 Man Down AT 29 E 13 8 Configured on a COMPUTED WE 13 9 Logging In to the GPS Platform 14 10 Savery and Usage ed e E 14 BSD DO A ee ee tate ee ee ee ee 15 Copyright 2014 Meitrack Group All rights reserved 3 2 meitrack MEITRACK MT90A User Guide 1 Copyright and Disclaimer Copyright 2014 MEITRACK All rights reserved Cod and lt P are trad
5. arger the value is the stronger the signal is If the value is greater than 12 GPRS reaches the normal level 23Km h Indicates the speed Unit km h http maps google co This is a map link Latitude 22 540103 Longitude 114 082329 m maps f q amp hl en amp q 22 540103 114 08232 9 If no GPS signal is valid for the tracker the tracker will reply the most recently location that is positioned successfully and a piece of GSM position information If your mobile phone does not support HTTP enter the latitude and longitude on Google Maps to query a location Copyright 2014 Meitrack Group All rights reserved 10 Q meitrack MEITRACK MT90A User Guide fideos Maps News Shopping Gmail more Google maps 22 540103 114 082329 ea lass hud perse 7 juale Bide wer varo Set directions My places De tan o my LR far wer a et i e ar ThenhuaRo s H MES Gel Guangdong Shenzhen Fu Tian Qu Shen rah GE Modern Satellite Nan Zhong Lu 30138 window Bldg F Mahe China ie so Traffic ZhenzhongRd 5 z t rch i 5 amp xplor zen E yoba och ap Bd a Fuhua Rd 6 t 5 Yi Dhs ae mT a da ko m ESA e np uyua Fujing ELE Ei d Deg Ces sg ansi ous 200 m z x 02611 GE MAR date 920 E eme CTUSE Tan TS Note The default password of the tracker is 0000 The password can be changed by using Meitrack Manager or SMS commands After the password is changed successfully by using SMS command onl
6. cifications Dimension Weight Charging voltage Standby battery Power consumption Operating temperature Humidity Working hour Indicator Button Switch Microphone Loudspeaker Memory Sensor GSM frequency band GPS sensitivity Positioning accuracy Q meitrack Low battery alarm Listen in Two way calling Polygon geo fence Stillness Movement alarm Online Parameter Editor 77mm x 47 mm x 20 mm 70g Micro USB charging port DC 4 2 V 5 5 V 400 mA 1100 mAh 3 7 V rechargeable and replaceable lithium ion battery Nokia BL 5C compatible 60 mA standby current and 5 mA deep sleep 20 C to 55 C 5 to 95 240 hours in power saving mode and 14 hours in normal mode 2 indicators showing power GSM and GPS status 5 buttons switches Internal microphone and loudspeaker 8 MB byte 130 000 GPS Logs 8 000 GPRS caches and 256 SMS caches Acceleration sensor GSM 850 900 1800 1900 MHz 161 dB 2 5m 4 MT90A and Accessories MT90A tracker A battery Micro USB cable Screwdriver Lanyard Travel adapter charger Printed MEITRACK MT90A User Guide and CD Copyright 2014 Meitrack Group All rights reserved Q meitrack MEITRACK MT90A User Guide 5 About the MT90A 5 1 Appearance o E to J 12 GPS indicator blue Indicates GPS and battery status For details see the section 5 2 Indicator GSM indicator Indicates GSM status For details see the section 5 2 Indicator green An
7. emarks that belong to Meitrack Group The user manual may be changed without notice Without prior written consent of Meitrack Group this user manual or any part thereof may not be reproduced for any purpose whatsoever or transmitted in any form either electronically or mechanically including photocopying and recording Meitrack Group shall not be liable for direct indirect special incidental or consequential damages including but not limited to economic losses personal injuries and loss of assets and property caused by the use inability or illegality to use the product or documentation 2 Product Overview The MT90A a personal tracking device is designed for the elderly children pets and lone workers It has the following functions O Two way calling SOS alarm Low power consumption and long standby time Polygon geo fence alarm Man down alarm 3 Product Function and Specifications 3 1 Product Function 3 1 1 Location Tracking GPS GSM dual module tracking Real time location query Track by time interval Track by distance Track on a mobile phone Overspeeding alarm Direction change report 3 1 2 Emergency Alarm SOS alarm Man down alarm 3 1 3 Other Functions SMS GPRS TCP UDP communication Meitrack protocol GPS blind spot alarm O Support for Over the Air OTA Copyright 2014 Meitrack Group All rights reserved 4 MEITRACK MT90A User Guide 3D wakeup 3 2 Spe
8. he time zone is set to Beijing time successfully The digit is your MT90A s IMEI number 7 6 Man Down Alarm A29 The command is used to enable the man down alarm function An alarm will be generated in case of falling SMS text 0000 A29 Switch Time Grade Responding IMEI A29 0K Note 1 Switch indicates the man down alarm detection switch When the parameter value is 1 enable the man down alarm function When the parameter value is 0 disable the man down alarm function 2 Time indicates the buzzing and vibration time after falling In this period you can press any button to clear the alarm and thus avoid inaccurate alarm information After the period an alarm will be generated or a call will be made The parameter unit is second Value range 0 255 Default value 10 3 Grade indicates the man down alarm grade The parameter value ranges from 0 to 3 The default value is 1 The smaller the value is the high probability an alarm will be generated If an authorized phone number was set by using command A71 the phone number will receive SMSs and calls by default when a man down alarm is generated For details about SMS commands see the MEITRACK SMS Protocol 8 Configured on a Computer This section describes how to use Meitrack Manager to configure the MT90A on a computer Procedure 1 Install the USB driver and Meitrack Manager 2 Connect the MT90A to a PC with a USB cable Copyright 2014 Meitrack Group All
9. king and the GSM and MCU modules enter the sleep mode The GPS GSM MCU module will be woken up if the tracker is activated by SOS any triggering by a button incoming call message After that it will repeat above processes The MT90A can enter sleep mode under vibration and vibration cannot wake the MT90A up from sleep mode In any condition you can use an SMS or a GPRS command to disable the sleep mode and then the tracker exits the sleep mode and switches back to the normal working mode Copyright 2014 Meitrack Group All rights reserved 12 2 meitrack MEITRACK MT90A User Guide 7 5 Time Zone B35 The command is used to modify the SMS report to display the correct local time zone Default value Beijing time GMT480 To change the time zone follow the following instructions O SMS text 0000 B35 480 Send the text to the embedded SIM card phone number The MT90A automatically replies to the SMS IMEI B35 OK It indicates that the time zone is set successfully Note The time zone is in unit of minutes The default time zone on the tracker is GMT 8 480 minutes and the time zone of SMS reports is different from that of GPRS data packets The GPS Log time zone is GMT 8 When SMS minute is 0 the time zone is GMT 0 default time zone When SMS minute is a value ranging from 32768 to 3276 7 set different time zones Set the China time zone value to 480 default value Example 0000 B35 480 Reponding 353358017784062 B35 OK T
10. nformation about how to set your device please read the following instructions 7 Quick Operation Command Before normal usage common parameters must be set either by SMS command or by software 7 1 Real time Location Tracking This section describes how to query the current location of the portable MT90A ensuring that the GPS is working normally Call the SIM card phone number embedded in the MT90A and hang up after the dial sound 2 3 times Note If an authorized phone number was set by SMS command A71 only this phone number can receive SMS reports An SMS with a map link is received Click the link to query the location Copyright 2014 Meitrack Group All rights reserved 9 MEITRACK MT90A User Guide Tracker calling mobile Ons SMS example all PR T Lin nungen Q meitrack 16 45 Tracker Contaci Info EVT To 06 42 Mow 110727 02 48 V 16 23Km 1 61 Nip vimaps googie co d Ale UTFBAz 16Abloc addra Now 110727 02 48 V 16 23Km h 61 http maps google com maps f q amp hl en amp q 22 540103 114 082329 The following table describes the SMS format Indicates the current location Indicates the date and time in YYMMDD hh mm format The GPS is invalid Indicates the GSM signal strength SMS header indicates the alarm type For details about the SMS header see the MEITRACK SMS Protocol and MEITRACK GPRS Protocol A Valid V Invalid Value 1 32 The l
11. rights reserved 13 eck ms serais Lemelttgck 3 Run Meitrack Manager and start the MT90A Meitrack Manager will automatically detect the tracker model x r Meitrack Manager Waiting forconnecting Auto Choose For details about Meitrack Manager see the MEITRACK Manager User Guide Note The CD delivered with the tracker contains Meitrack Manager The software language will be automatically switched according to the operating system language Press Ctrl L to manually switch the language 9 Logging In to the GPS Platform Visit http www trackingmate com and register an account or use the following account to log in to the free GPS platform User name IMEI number Password 0000 default You can perform the following operations on the GPS platform Query a location at certain time Query the trace O Add favorites e View various reports For more information about our GPS platform see the MEITRACK Family GPS Tracking System FreeEdition User Guide 10 Safety and Usage Instructions Use only Meitrack approved accessories Incompatible accessories may cause serious injuries or damages to your device Handle the battery and charger carefully Use batteries specified by Meitrack and chargers exclusively designed for your device Incompatible batteries and chargers may cause serious injuries or damages to your device Do NOT place batteries or devices on fire or in heating devices such as
12. st be sepearated by a comma to avoid setting failures If no monitornumber is set Monitor number 1 and Monitor number 2 remain blank the default value is blank However the comma must be retained Example 0000 A72 13844444444 13855555555 Reponding 353358017784062 A72 0K To clear all monitor numbers send 0000 A72 7 4 Smart Sleep A73 This command is used to enable the sleep mode function prolonging standby time to 240 hours In this mode the recorder scheduled tracking and location tracking functions are disabled o SMS text 0000 A73 Sleep level Send the text to the embedded SIM card phone number The MT90A automatically replies to the SMS IMEI A73 OK It indicates that the sleep mode is set successfully To enable the GPS Log or scheduled tracking function disable the sleep mode Note When the sleep level is 0 default value disable the sleep mode When the sleep level is 1 the tracker enters the normal sleep mode The GSM module always works and the GPS module occasionally enters the sleep mode The tracker works 25 longer in the normal sleep mode than that in the normal working mode The mode is not recommended for users who set the scheduled tracking at a short interval In this way the mode will affect trace integrity When the sleep level is 2 the tracker enters the deep sleep mode If the tracker is inactive no SOS any triggering by a button incoming call message for 5 minutes the GPS module stops wor
13. swer Hang up Press the button to receive an incoming call button Press the button to terminate the call Press and hold down the button for 2s to send a GPRS message to the server when no incoming call or conversation is received In this way the device will sound BI once and vibrate i 4 SOS button Press and hold down the button for 2s in the case of emergency The device will sound BI once and vibrate The MT90A will also dial three authorized phone numbers in turn It will stop dialing when one phone number answers Meanwhile the MT90A will send an SMS to the authorized phone number and send a GPRS message to the server if the GPRS function is enabled ST Press the button to wake the device up if the device is in sleep mode It will run automatically when the listen in and call functions are used Loudspeaker It will run automatically when the call function is used Power on off Press and hold down the button for 2s to turn on the MT90A button Press and hold down the button for 2s to turn off the MT90A Press the button to wake the MT90A up from sleep mode The power indicator will blink for 10s Micro USB port Used for charging connecting a computer for parameter settings and upgrading software Volume GPS Log Press the button to turn up the volume button Press and hold down the button for 2s to start hands free conversation Copyright 2014 Meitrack Group All rights reserved 6 GC meitrack
14. the environment in which you operate your phone the features and or other program usage patterns Copyright 2014 Meitrack Group All rights reserved 8 2 meitrack MEITRACK MT90A User Guide 5 Charge the battery The battery is partially charged before shipped Before using the device for the first time you are advised to turn off the device and then charge the battery for 8 hours To charge the battery you can connect the device to the adapter or a computer through the USB cable Note Do not remove the battery unless necessary during charging While charging the device may heat up This is normal and does not affect your device s lifespan or performance If the battery is low it may affect positioning and data transmission In this way charge the battery before using Charge with the travel adapter Open the cover of the multifunctional jack of the device Plug the small end of the adapter into the multifunctional jack Then plug the larger end of the travel adapter into a power outlet Note Incorrect connection may cause serious damages to the device Any damage caused by misuse is not covered in the warranty Attach a lanyard Slide the lanyard through the slot and hook it over the small projection Once you have installed the battery and SIM card you can turn on your device and start using it When you turn on the device for the first time you will be prompted to set your device For more i
15. tion Steady on The MT90A is charging Blink every 5s The MT9OA is in sleep mode 1s on and 1s off The GPS is invalid or the MT90A is initializing Off The GPS is valid GSM Indicator Green e Status Description Steady on A call is coming in or busy Blink every 5s The MT9OA is in sleep mode 1s on and 1s off No signal is received or the MT90A is initializing Off The MT9OA is connected to the GSM network Copyright 2014 Meitrack Group All rights reserved 7 Q meitrack MEITRACK MT90A User Guide 6 First Use 1 Remove the battery cover Turn off the device With the back panel facing you use the mini screwdriver to remove the two screws to release the back cover Then lift up the back cover from the notch at the bottom of the device 2 Insert the SIM card Gently push the SIM card into the slot until you hear a click with the gold colored side facing down Note Ensure that the SIM card password lock is closed and the SIM card has sufficient balance and has subscribed the call ID service If you want to use the GPRS function learn about the SIM card GPRS charging first This operation is only for customers in China 4 Install the battery Insert the contacts side of the battery first and then gently push the battery cover downward until it locks into place Then fasten the two screws on the back cover Note Battery performance depends on many factors including signal strength the temperature of
16. y the authorized phone number can receive SMS reports The common format of an SMS command is Password Command Parameter 7 2 SOS A71 This command is used to set the SOS number When you call the phone number an SMS report about the location and other SMS functions will also be received o SMS text 0000 A71 Function number 1 Function number 2 Function number 3 Send the text to the embedded SIM card phone number Tip should be an English comma and no space exists before and after the comma The MT9OA automatically replies to an SMS IMEI A71 OK It indiates that the SOS number is set successfully Note Function number Contains a maximum of 16 bytes If no function number is set leave Function number blank default value Function number 1 Set the phone number to the SOS number When you dial the tracker the tracker replies an SMS with location information and a geo fence alarm and a low battery alarm are generated Function number 2 3 When you dial the tracker the tracker replies an SMS with location information When you press the SOS button the MT90A will dial three authorized phone numbers It will stop dialing when one phone number answers Note The preauthorized phone numebrs are blank by default The set phone numbers must be seperated by comma to avoid setting failures No comma is required next to the last phone number For example 0000 A71 13500000000 0000 A71 13500000000 13600000000 0000 A71 13
Download Pdf Manuals
Related Search